[resolved] CID unlocked G4, how ROM? - JAMin, XDA Neo, S200 Software Upgrading

Hy !
I've CID unlocked my SPV M600, now I want to say what ROM can I install ?
Every ?
Can I upgrade my IPL and SPL?
What are limitations?
thank for your help
regards

Use wiki ... no G4 CID Unlook for free!
If CID is free ... you can Flash all.

NetrunnerAT said:
Use wiki ... no G4 CID Unlook for free!
If CID is free ... you can Flash all.
Click to expand...
Click to collapse
I say that, I've payed for that but in the wiki I don't see more information about ROM upgrade.
What I want :
- to dump my actual ROM (complete with IPL, SPL, Radio, System, personnal data etc...)
- to flash new ROM with new IPL/SPL etc...
- to can back to my first dumped ROM.
thx

You can flash all ... IPL/SPL Updates are only Updates ... you can Flash a higher number but go back isnt possible.

NetrunnerAT said:
You can flash all ... IPL/SPL Updates are only Updates ... you can Flash a higher number but go back isnt possible.
Click to expand...
Click to collapse
ok, thank you !
Moderators can lock this topic

How do I know if I have a locked or unlocked CID ?
How do I know if I have a locked or unlocked CID in my S200?

Related

From AKU 3.2 to 2.3

I am using Prophet_WM5AKU3.2_v3221_lvsw_edition. What is the procedure of downgrade to others?
Install the offical rom first and then upgrade to others?
Thanks
should be someone experience on this but no one give me help...
xpking said:
should be someone experience on this but no one give me help...
Click to expand...
Click to collapse
if your phone is CID unlocked, its the same procedure as the upgrade.
just pick the ROM you like and downgrade
(might be smart to install the official Qtek 2.20 ROM first, and then install anything you like !
Jesterz said:
if your phone is CID unlocked, its the same procedure as the upgrade.
just pick the ROM you like and downgrade
(might be smart to install the official Qtek 2.20 ROM first, and then install anything you like !
Click to expand...
Click to collapse
Thanks. If i want to install the official rom again, should i just hard reset and install again? (my phone is CID locked)
How to recognize if your phone in CID locked or unlocked?
Thanks
Pepez said:
How to recognize if your phone in CID locked or unlocked?
Thanks
Click to expand...
Click to collapse
If you have not done anything, it should be CID locked...
xpking said:
If you have not done anything, it should be CID locked...
Click to expand...
Click to collapse
Surely u can downgrade as I was also using 3.2 but then decided to downgrade to 2.3 lvsw(latest one)...its irrespective of cid
locking...as i also have G4 device which is CID unlocked....
Procedure is quite simple...first downgrade to offcial WWE rom (older one) and then upgrade it from there...just follow what id described in this thread's first post...
http://forum.xda-developers.com/showthread.php?t=283965
I was also not sure abt this and I asked the same question here but didn't get any response so finally i took the courage to downgrade which went thru very smoothly...

cid locked g4

1. how can i check, is my device cid locked?
2. can i upgrade rom (g4) dutch version to english (if my device is cid locked)
tomas
Please Check the Wiki.

INvalid Vendor ID error !!!!

Hey guys,
I am using a t-mobile MDA vario. I finally cid unlocked my wizard using WST 3. now my IPL/SPL is 1.05. now if I try to flash with T-mobile 2.26 shipped rom. It gives Invalid vendor id error. What to do now? How to update my IPL/SPL ??
Please help me.
devilmaycry5 said:
Hey guys,
I am using a t-mobile MDA vario. I finally cid unlocked my wizard using WST 3. now my IPL/SPL is 1.05. now if I try to flash with T-mobile 2.26 shipped rom. It gives Invalid vendor id error. What to do now? How to update my IPL/SPL ??
Please help me.
Click to expand...
Click to collapse
Your phone is still not CID unlocked.
There is no WST 3 as yet,the only WST tool by mestrini available at present is WST version 4.2.1 and you can download it from this link:-
http://forum.xda-developers.com/showthread.php?t=329170
download and run the tool ,specially the 'CID Action' button and post the report generated to verify the CID locked/unlocked status,SIM and CID unlock are entirely different.it may be SIM unlocked but you cannot CID unlock with WST,it has to be done with lokiwiz02b method.To understand the method of unlocking read and fully understand the guide posted here:-
http://forum.xda-developers.com/showthread.php?t=285435
I think you have to followed the guide correctly,after flashing button's rom 1.05,when ipl/spl 1.05 is achieved,than you have to use lokiwiz02b to cid unlock.after that it's recommended to upgrade to T-mobile 2.26 to have ipl/spl 2.26.good luck

After succesfully flashing WM6 rom, the rom doenst work

I have succesfully flashed my Wizard G4 with a WM6 rom...but...
After the flashing is done, the previous installed rom starts again...
I already tried to flash is first with the Wizard_love rom or official qtek rom but it doesnt make a difference...
I am trying to run the dutch WM6 rom...
Is anybody familiar with this problem? I have searched the forum but couldnt find anything about it...
This means your device isn't CID unlocked.
You'd have to unlock it in order to update your ROM.
the-equinoxe said:
This means your device isn't CID unlocked.
You'd have to unlock it in order to update your ROM.
Click to expand...
Click to collapse
? The CID lock is only to prevent flashing other roms into the phone, am I right?
I used the softSPL, and flashing a rom isnt the problem...
I have flashed: Qtek roms, Wizardlove roms but WM6 roms won't work...
Maybe hardSPL is the solution?
Correct me if im wrong..
thagangsta said:
? The CID lock is only to prevent flashing other roms into the phone, am I right?
I used the softSPL, and flashing a rom isnt the problem...
I have flashed: Qtek roms, Wizardlove roms but WM6 roms won't work...
Maybe hardSPL is the solution?
Correct me if im wrong..
Click to expand...
Click to collapse
YES ! CID lock is to prevent flashing any other Roms other then the official carrier's Roms. A G4 device cannot be CID unlocked like a G3 device,the only solution to upgrade a G4 device to WM6 Rom is by tricking it into patched SPL through SoftSPL and HardSPL temporarily.
You might have not performed the SoftSPL method correctly,read carefully and do the procedure again correctly,it's better to use SoftSPL then HardSPL,if still you are unable to get it,then you may opt for HardSPL.
Cheers !
I think you all misunderstand the problem.
Flashing the G4 aint the problem, I can flash it by using softSPL with every rom I want...
All the roms are working, except when I try WM6 roms...
When I have flashed a WM6 rom, the G4 boots the previous installed rom again, hardresetting doenst matter...
I have had the same problem with a G3, then the cause was a wrong (to old version) bootloader...after upgrading the bootloader the problem was solved...
My G4 has bootloader version 2.18.000.1, could it be that this bootloader is to old to run a WM6 rom, and if so which version bootloader should be recommended?
Thanx in advance!

NoID tools for vox ??

Is there any NoID upgrade utility for VOX ??
or is it possible in other way to instal rom when I have got CID lock or to unlock CID from bootloader ??
Go read the uSPL sticky and the Vox Wiki.
I readed it and I know how work USPL.
My os hang up on WM logo and I can't unlock CID with USPL or instal rom (CID lock).
Is there any other possible to unlock CID (not from WM, maybe from bootloader) or install ROM iven if I have CID lock ??
go to bootloader mode(cam+power)
and conenct the phone to pc!
run a romupdate matchign to your cid(vodafone orange sfr etc)-
after install uspl! should work!
I have orange from Poland but I can't find polish "ship" rom for my spv.
I found 2 roms but they was modified and had modified CID too.
so go to your provider webpage and search for updates for your device should find it there!

Categories

Resources