INvalid Vendor ID error !!!! - 8125, K-JAM, P4300, MDA Vario ROM Development

Hey guys,
I am using a t-mobile MDA vario. I finally cid unlocked my wizard using WST 3. now my IPL/SPL is 1.05. now if I try to flash with T-mobile 2.26 shipped rom. It gives Invalid vendor id error. What to do now? How to update my IPL/SPL ??
Please help me.

devilmaycry5 said:
Hey guys,
I am using a t-mobile MDA vario. I finally cid unlocked my wizard using WST 3. now my IPL/SPL is 1.05. now if I try to flash with T-mobile 2.26 shipped rom. It gives Invalid vendor id error. What to do now? How to update my IPL/SPL ??
Please help me.
Click to expand...
Click to collapse
Your phone is still not CID unlocked.
There is no WST 3 as yet,the only WST tool by mestrini available at present is WST version 4.2.1 and you can download it from this link:-
http://forum.xda-developers.com/showthread.php?t=329170
download and run the tool ,specially the 'CID Action' button and post the report generated to verify the CID locked/unlocked status,SIM and CID unlock are entirely different.it may be SIM unlocked but you cannot CID unlock with WST,it has to be done with lokiwiz02b method.To understand the method of unlocking read and fully understand the guide posted here:-
http://forum.xda-developers.com/showthread.php?t=285435
I think you have to followed the guide correctly,after flashing button's rom 1.05,when ipl/spl 1.05 is achieved,than you have to use lokiwiz02b to cid unlock.after that it's recommended to upgrade to T-mobile 2.26 to have ipl/spl 2.26.good luck

Related

cid locked g4

1. how can i check, is my device cid locked?
2. can i upgrade rom (g4) dutch version to english (if my device is cid locked)
tomas
Please Check the Wiki.

[resolved] CID unlocked G4, how ROM?

Hy !
I've CID unlocked my SPV M600, now I want to say what ROM can I install ?
Every ?
Can I upgrade my IPL and SPL?
What are limitations?
thank for your help
regards
Use wiki ... no G4 CID Unlook for free!
If CID is free ... you can Flash all.
NetrunnerAT said:
Use wiki ... no G4 CID Unlook for free!
If CID is free ... you can Flash all.
Click to expand...
Click to collapse
I say that, I've payed for that but in the wiki I don't see more information about ROM upgrade.
What I want :
- to dump my actual ROM (complete with IPL, SPL, Radio, System, personnal data etc...)
- to flash new ROM with new IPL/SPL etc...
- to can back to my first dumped ROM.
thx
You can flash all ... IPL/SPL Updates are only Updates ... you can Flash a higher number but go back isnt possible.
NetrunnerAT said:
You can flash all ... IPL/SPL Updates are only Updates ... you can Flash a higher number but go back isnt possible.
Click to expand...
Click to collapse
ok, thank you !
Moderators can lock this topic
How do I know if I have a locked or unlocked CID ?
How do I know if I have a locked or unlocked CID in my S200?

NoID tools for vox ??

Is there any NoID upgrade utility for VOX ??
or is it possible in other way to instal rom when I have got CID lock or to unlock CID from bootloader ??
Go read the uSPL sticky and the Vox Wiki.
I readed it and I know how work USPL.
My os hang up on WM logo and I can't unlock CID with USPL or instal rom (CID lock).
Is there any other possible to unlock CID (not from WM, maybe from bootloader) or install ROM iven if I have CID lock ??
go to bootloader mode(cam+power)
and conenct the phone to pc!
run a romupdate matchign to your cid(vodafone orange sfr etc)-
after install uspl! should work!
I have orange from Poland but I can't find polish "ship" rom for my spv.
I found 2 roms but they was modified and had modified CID too.
so go to your provider webpage and search for updates for your device should find it there!

Questions about IPL/SPL and hardspl

Hi,
My old Dopod 818 originally showed the following when booting:
IPL 1.00
SPL 2.15.0000
GSM 02.19.21
OS 2.15.13.27
I used "Prophet Upgrade 2.6 - bikertibi" to upgrade it to WM6.1. I selected HardSPL in that program, and flashed it. This worked fine (scary moment
However, when I boot it now, it STILL shows the exact same IPL, SPL and GSM versions. Only the OS version has changed.
My question: is this normal? I thought the hardspl would change the IPL or SPL versions on the phone?
Is it possible or usefull to upgrade IPL/SPL also?
Second question: if I want to re-flash it again to another 6.5 ROM, can I just use this utility again, without hardspl selected, and without first downgrading back to WM5?
Thanks a lot...
Yup, it's normal because cooked roms don't include ipl/spl (prophet has 2 version : G3 and G4) and radio ... you wouldn't want to brick your device if flashing wrong ipl/spl would you?
However, it is recommended to install HardSPL so that if anything happen during flashing, you can recover the device via entering bootloader mode and only select your device version (G3 or G4) without selecting HardSPL.
ps : your device is G3 because it ends with 0000 .. read the wiki. TQ
Thanks for your reply. So I guess there is no need for me to upgrade IPL, SPL or radio.
How do I know if hardspl is installed?
And if I want to re-flash it again to another 6.5 ROM, can I just use this utility again, without hardspl selected, and without first downgrading back to WM5?
PS. I know my device is a G3, since I already flashed it (see above)
Thanks again.
HardSPL have number like this 2.G3.4PDA (for G3) or 2.G4.4PDA (for G4)... if you haven't HardSPL your device, you need to have HardSPL ticked before flashing. And if anything happen during flashing, your hope is to flash NVID flash.
If your device already HardSPL, you can just redo the flashing. No need to flash NVID unless HardSPL gets overwritten by stock ROM.
Hope this helps.
ps : lucky you .. G3 has more storage memory than G4 ... mine is G4 ...
So if hardspl is present, I should see something like SPL = 2.G3.4PDA at the bootscreen? This is not the case, I still see SPL 2.15.0000 like it did before the flashing. So I guess I don't have hardspl? But how can that be? I click on hardspl in the upgrade tool, and it didn't give an error message... Or do I need to add extra SPL files for this?
It's still unclear to me if I have hardspl installed or not :-( If it's "no", how could I have installed a cooked rom??? If it's "yes", how come I still see SPL 2.15.0000 at the boot screen?
Any help is appreciated!
From what I understand, bikertibi upgrade tools suppose to hardSPL the device but sometimes it seems to just load SoftSPL to the device so that it would temporarily make the device SuperCID? (will experimenting on this) Only SuperCID device can accept any rom. That's why if anything happen during the flashing, your device can only be recovered either by flashing specific CID (t-mobile/cingular/etc) rom or NVID (no specific vendor) rom if it doesn't HardSPLed. It will either reject the flashing process and the device will stuck in bootloader mode.
Since your device still shows SPL 2.15.0000 the answer is no, your device is not HardSPL. Cooked rom was flash successfully because SoftSPL in bikertibi 'tricked' the RUU to be SuperCID temporarily during flashing so it can finish writing a custom rom.
HardSPL for G3 can be download here : http://forum.xda-developers.com/showthread.php?t=353547
To flash a HardSPL, the device needs activesync/wmdc connection to load a special SoftSPL into the device before it can overwrite the stock SPL.
ps : I recommend you learn how to create SDcard dump if you don't want to HardSPL your device. This is because other than flashing stock ROM/NVID, your device can still be recovered using SDcard backup (it will overwrite everything including ipl/spl/os)
EDIT : Flashed my device to IPL/SPL 2.20.0001. bikertibi HardSPL ticked during flashing only send SoftSPL. Flashing was successful. Still need to flash HardSPL 2.G4.4PDA again after phone boots up normally to make it 'immune' from bricking
aze2learn,
Thank you very much for your help.
Indeed, after using the Prophet upgrade tools and activating "hardspl", hardspl was still not on the phone (so it must have used softspl). I installed it manually via the link you provided, and the SPL value changed! After that, I upgraded it to bikertibi's rom.
Very happy with the result.
Thanks again, I will also try the SDcard dump later.

CID Unlock check

I have done a HSPL on my elfin.
IN the bootloader also it shows spl:3.10.cmon
So does this say that i can flash any ROM into it or do i need to check whether CID is unlocked ??

Categories

Resources