Related
Is there any way to actually pull all three of the existing startup splash screens off the Wizard? Would like to pull them off, edit them, and put them back on again. I know how to do the latter, but cannot locate any directions (if it is even possible) on how to pull them off into an editable format.
Thanx.
isamts said:
Is there any way to actually pull all three of the existing startup splash screens off the Wizard? Would like to pull them off, edit them, and put them back on again. I know how to do the latter, but cannot locate any directions (if it is even possible) on how to pull them off into an editable format.
Thanx.
Click to expand...
Click to collapse
I don't think that's possible. Not sure dough. I tried it, but you cannot restore properly splashscreen 1 and 2
anichillus said:
I don't think that's possible. Not sure dough. I tried it, but you cannot restore properly splashscreen 1 and 2
Click to expand...
Click to collapse
So, the only way to fix a problem on the first splash is to start all over and reflash it?
Thanx.
isamts said:
So, the only way to fix a problem on the first splash is to start all over and reflash it?
Thanx.
Click to expand...
Click to collapse
yes, of that I'm sure
My little contribution.
I hope you like it.
Safe for use with G4 and G3.
Enjoy.
Run the update utility as always. It will only flash the boot screen.
Best Regards.
charly_mx said:
I hope you like it.
Safe for use with G4 and G3.
Enjoy.
Run the update utility as always. It will only flash the boot screen.
Best Regards.
Click to expand...
Click to collapse
That's all fine and dandy. However, I am looking to edit my own screens that I've already flashed to the device. I was hoping there would be a way for me to extract them back off so I could just change a little something. I guess that's what I get for not saving a copy, eh?
If you want.
isamts said:
Is there any way to actually pull all three of the existing startup splash screens off the Wizard? Would like to pull them off, edit them, and put them back on again. I know how to do the latter, but cannot locate any directions (if it is even possible) on how to pull them off into an editable format.
Thanx.
Click to expand...
Click to collapse
If you want me to make a bootscreen with an image of your preference design it in bmp 240 x 320. attach it to this thread and i will make the flash tool to flash only your startup screen.
Best regards.
charly_mx said:
If you want me to make a bootscreen with an image of your preference design it in bmp 240 x 320. attach it to this thread and i will make the flash tool to flash only your startup screen.
Best regards.
Click to expand...
Click to collapse
Thank you for the offer, but I already know how to flash the screens to the device. I was just trying to extract an existing screen from my ROM so I might edit it and then re-flash it.
I have to give the forum props though...so many peeps all wanting to help out. Thanx.
charly_mx said:
I hope you like it.
Safe for use with G4 and G3.
Enjoy.
Run the update utility as always. It will only flash the boot screen.
Best Regards.
Click to expand...
Click to collapse
Nice work there. I like it
yea this is nice im using this one
Here's a couple of screens that I think may be what you are looking for (or very close). One is the HTC Logo (but its bigger than whats in the Faria and nottoosmart roms). The other is the Black screen with the world and the Windows logo over it.
isamts said:
Thank you for the offer, but I already know how to flash the screens to the device. I was just trying to extract an existing screen from my ROM so I might edit it and then re-flash it.
I have to give the forum props though...so many peeps all wanting to help out. Thanx.
Click to expand...
Click to collapse
I've tried it and I can only see the file on my device with that rom! I can't view the file on any other rom and my pc. The 3 splash screens, as far as I know can cut back to two. You can have the same splash for both but its the same pic twice.
update 4-10-2007
Finally got pic to be seen on pc. I wanted to change the 3rd or welcome secreen so I renamed my pic and replaced what was already on my device. It works but not in landscape, no big deal...I don't boot with my keyboard open anyways.
mb
charly_mx said:
If you want me to make a bootscreen with an image of your preference design it in bmp 240 x 320. attach it to this thread and i will make the flash tool to flash only your startup screen.
Best regards.
Click to expand...
Click to collapse
charly, is it possible to have a nk file with the MB ROM splash? it's the one that is inside the splashes.zip in this thread...
thanks!!
isamts said:
Is there any way to actually pull all three of the existing startup splash screens off the Wizard? Would like to pull them off, edit them, and put them back on again. I know how to do the latter, but cannot locate any directions (if it is even possible) on how to pull them off into an editable format.
Thanx.
Click to expand...
Click to collapse
ok you can do this but not in the exact way you specified.
The way i did it is to take the rom that has the splash screens in it and dump it, I used Molski.biz rom tools, I won't go into detail about dumping a rom. use typo5.exe
then i used bcl.exe to extract the .nb files into bmp
I am not going to do a step by step here that is the general idea.
I don't know how to get a rom off a phone but if you have the rom that you put on the phone dump it and grab the splash screens from it.
the tools i used are in molski's devpack
btw the 3rd splash screen is a png file in the rom with some stupid name it is um welcomehead.96.png and it is actually a perfect 320 square so that it will load nicely in both portrait or landscape mode
I attached a Scarface splash screen I made using the HTC logo extracted from splash screen one of one of the newer roms
charly_mx said:
I hope you like it.
Safe for use with G4 and G3.
Enjoy.
Run the update utility as always. It will only flash the boot screen.
Best Regards.
Click to expand...
Click to collapse
thanks a lot! now my wizard is good than ever!
G4 locked
Hello charley-mx
can a flash this on my G4 locked vario, i us the xplore1.1 rom of anichillus
its fantastic, i wil flash only de screen whit the spl ipl numbers still tmobile screen is comming i dont like that sorry for my bad english
thanks all
I am a newbie. How do I know whether my phone is a G3 or G4. I am using Dopod 838. Can someone show me how to change the boot screen and to use the update utility safely.
Thanks in advance.
Go read the wiki.
To tell the difference between a G3 and a G4 wizard, you must look at the IPL and SPL versions. To find out what IPL/SPL version your Wizard has, turn the device off and back on. At the first splash screen, the IPL and SPL versions will be written in red at the top of the screen.
A G3 Wizard will have the following IPL: 1.xx or 2.xx or 2.xx.00x (Note that this version only has TWO 0's.).
SPL: 1.xx or 2.xx or 2.xx.00x (Note that this version only has TWO 0's.)
A G4 Wizard will have the following IPL: 2.xx.000x (Note that this version has THREE 0's.)
SPL: 2.xx.000x (Note that this version has THREE 0's.)
adriansaza said:
I am a newbie. How do I know whether my phone is a G3 or G4. I am using Dopod 838. Can someone show me how to change the boot screen and to use the update utility safely.
Thanks in advance.
Click to expand...
Click to collapse
just follow the steps.
adriansaza said:
I am a newbie. How do I know whether my phone is a G3 or G4. I am using Dopod 838. Can someone show me how to change the boot screen and to use the update utility safely.
Thanks in advance.
Click to expand...
Click to collapse
Just follow the steps posted on page 1 carefully. It wont damage anyhow your device (well i hope so)
Sorry for the delay
eljoe said:
charly, is it possible to have a nk file with the MB ROM splash? it's the one that is inside the splashes.zip in this thread...
thanks!!
Click to expand...
Click to collapse
I was on vacations m8.
Here you go. Enjoy !: )
Best regards.
Hello to everybody
I am having a strange problem with my kaiser vodafone, come up with white screen and does not work at all, is just possible have the tricolor screen using switch + camera keys, a this point I have tried to install new ROM, HARD SPL etc. the loading bar come up on screen but nothing happen,
I did plenty of suggestion reading around the forum but nothing is working, look like is a hardware faulty ????
So please if somebody expert on the matter can let me know something to do will be appraciate ...
thanks in advance
kissabout2002 said:
Hello to everybody
I am having a strange problem with my kaiser vodafone, come up with white screen and does not work at all, is just possible have the tricolor screen using switch + camera keys, a this point I have tried to install new ROM, HARD SPL etc. the loading bar come up on screen but nothing happen,
I did plenty of suggestion reading around the forum but nothing is working, look like is a hardware faulty ????
So please if somebody expert on the matter can let me know something to do will be appraciate ...
thanks in advance
Click to expand...
Click to collapse
please post this in the appropriate thread...like for example the HARDSPL thread. For example the one dealing with the white screen issue specifically. Try searching "hard spl white screen"
kissabout2002 said:
Hello to everybody
I am having a strange problem with my kaiser vodafone, come up with white screen and does not work at all, is just possible have the tricolor screen using switch + camera keys, a this point I have tried to install new ROM, HARD SPL etc. the loading bar come up on screen but nothing happen,
I did plenty of suggestion reading around the forum but nothing is working, look like is a hardware faulty ????
So please if somebody expert on the matter can let me know something to do will be appraciate ...
thanks in advance
Click to expand...
Click to collapse
for starters wrong thread .. secondly problem could have been completely avoided if you did the basic reading i.e. first hardspl .. if white screen than follow thread on white screen fix .. got hardspl? flash rom ... simple as that.
now u need help .. and instead of posting under the right thread you create a new redundant thread asking about a problem that quite a few people run into. in order for us to help we need info from your phone .. what does bootloader say? can u boot to operating system?
thesire said:
for starters wrong thread .. secondly problem could have been completely avoided if you did the basic reading i.e. first hardspl .. if white screen than follow thread on white screen fix .. got hardspl? flash rom ... simple as that.
now u need help .. and instead of posting under the right thread you create a new redundant thread asking about a problem that quite a few people run into. in order for us to help we need info from your phone .. what does bootloader say? can u boot to operating system?
Click to expand...
Click to collapse
sorry but I did not where put my problem, I did try to resolve it reading lots of other thread and I try lots of solution but nothing, anyway thanks for your help and time, so the problem with my kaiser is that it power up with white screen and nothing else happened then I have to take off the battery and put in again then pressing power button and camera I got the tricolor screen
http://www.ssb7.net/members/watch/image_view.php?path=http://www.ssb7.net/users/25415/&file=k3.jpg
connect to the computer running XP I try to update ROM or RADIO or SPL but the result is all the same this:
http://www.ssb7.net/members/watch/image_view.php?path=http://www.ssb7.net/users/25415/&file=k2.jpg
with the result on the computer:
http://www.ssb7.net/members/watch/image_view.php?path=http://www.ssb7.net/users/25415/&file=k1.jpg
a this point I have to take away the battery,
let me know if you need more information
thanks
Acky
You don't have hardspl installed. Install the hardspl, white screen fixed.
Follow the directions exactly. This is your freebie
http://forum.xda-developers.com/showthread.php?t=354061
P1Tater said:
You don't have hardspl installed. Install the hardspl, white screen fixed.
Follow the directions exactly. This is your freebie
http://forum.xda-developers.com/showthread.php?t=354061
Click to expand...
Click to collapse
thanks mate but how can I copy JumpSPL1.56-KAIS.exe to the device and run it if the device does not work ?
regards
Acky
well if nobody else is able to help I have to throw away this stupid expensive phone :-(
kissabout2002 said:
well if nobody else is able to help I have to throw away this stupid expensive phone :-(
Click to expand...
Click to collapse
Before you get too upset, have you tried posting in the correct thread? Just like was suggested over a week ago? Have you tried a hard reset? I don't see that anywhere in your steps you took. What about flashing a stock rom?
skatdawg said:
Before you get too upset, have you tried posting in the correct thread? Just like was suggested over a week ago? Have you tried a hard reset? I don't see that anywhere in your steps you took. What about flashing a stock rom?
Click to expand...
Click to collapse
thanks for help , I tried hard reset but then the same problem, about flash STOCK ROM how can I do that?
regards
Acky
kissabout2002 said:
thanks for help , I tried hard reset but then the same problem, about flash STOCK ROM how can I do that?
regards
Acky
Click to expand...
Click to collapse
You download the stock kaiser rom (searching is fun!), then you unrar, and click on the phone like button and follow the instructions. Then again, theres a thread on returning your phone to its original config. More searching fun!
kissabout2002 said:
well if nobody else is able to help I have to throw away this stupid expensive phone :-(
Click to expand...
Click to collapse
Don't trash, I will be happy to pay for shipping charges on it to ship it here
I cannot find UK VODAFONE STOCK ROM original 6.0, somebody knows where is possible found it?
thankssssss
Hi all,
I am quite new to android, I got my Magic few days ago.
I did tried to root the machine and found the wifi can't start.
Then i found a recovery program and tried to use that to restore my machine.
That was successful but found that is Taiwan ChungWah ROM with "Hami" boot logo with it.
So I flash it again to HK official rom BUT the "Hami" boot logo is still there, can anyone please help me with this problem? I just want to restore my magic to HK official status...
Also does anyone knows what is the SPL version of HK ROM? Can I flash it back to official SPL after flashing the ROM?
Thanks!
Check your motherboard.
This is essential to further your progress in rooting your device.
Turn off your device.
Now, power it on while holding the POWER KEY + VOLUME DOWN - this will load the information directly from your phone for display.
Write down what you see.
Then seek out assistance based on your motherboard version.
Good luck.
I want to replace boot logo as well , how can I ?
Hello, is there anyway can replace Taiwan Magic's Hami boot logo ? I try the fastboot flash method and it does not work. Is there anyone know how to replace ? thanks
wenwei.yang said:
Hello, is there anyway can replace Taiwan Magic's Hami boot logo ? I try the fastboot flash method and it does not work. Is there anyone know how to replace ? thanks
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=HTC_Sapphire_Hacking_2 see Flashing a new splash screen
Read read read b4 you post!
*sigh* this belongs in general.
XDA needs mods to move threads, its sickening how people dont know to post in the right SECTION
WaterMan! said:
*sigh* this belongs in general.
XDA needs mods to move threads, its sickening how people dont know to post in the right SECTION
Click to expand...
Click to collapse
Almost as sickening as your constant whinging about other peoples posts
Thanks for njakopos, but I still cannot splash
I read the wikki and excute the right image/command after fastboot, but it shows error verifying. my phone was rooted with myhero 008 version. is there any other ways to replace the Hami logo ?
njakobs said:
http://wiki.xda-developers.com/index.php?pagename=HTC_Sapphire_Hacking_2 see Flashing a new splash screen
Read read read b4 you post!
Click to expand...
Click to collapse
this program just support G1 not for G2
I got the same problem~ could anyone plz tell me how to flash the splash screen into what the other htc branded G2's splash screen
my problem was found , read the article and follow up the instruction
my problem was found , read the article and follow up the instruction
I need to flash SPL to be able to change the boot logo
http://forum.xda-developers.com/showpost.php?p=3843361&postcount=7
I have looked for a considerable amount of time and still cant get this down, I changed roms to a Sense rom, and it changed my splash screen, which was fine but now I went back to cyannogen, with a full wipe and the splash screen didnt revert to the original sensation one, I would like it to go back, any ideas on where I could get the file and how to flash it exactly would be great, I am very noobish with this stuff so any kindness would be greatly appreciated, I am not saying this hasnt been covered, Im just saying that I in my efforts have been unable to find the information, please and Thank you.
In post 6 there are instructions on how to flash a Splashscreen.
There is also a link in the post on how to make a Splashscreen.
I am sorry but I do not have the stock Splashscreen
http://forum.xda-developers.com/showthread.php?t=1499517
There is one roaming in one of these threads somewhere.
Sent from my HTC Sensation Coredroid V5.1
Righteous Joe said:
I have looked for a considerable amount of time and still cant get this down, I changed roms to a Sense rom, and it changed my splash screen, which was fine but now I went back to cyannogen, with a full wipe and the splash screen didnt revert to the original sensation one, I would like it to go back, any ideas on where I could get the file and how to flash it exactly would be great, I am very noobish with this stuff so any kindness would be greatly appreciated, I am not saying this hasnt been covered, Im just saying that I in my efforts have been unable to find the information, please and Thank you.
Click to expand...
Click to collapse
Hi,
Check HERE
If you want the stock htc splash then you can download this:
http://db.tt/3FSojp5f
You can run a script from terminal to flash any created splash:
Code:
dd if=/mnt/sdcard/[COLOR="Red"]your splash file[/COLOR] of=/dev/block/mmcblk0p14
Change the "your splash file" to whatever you've named your splash, and make sure you type everything correctly. If you mistype the block you stand a chance of writing to the wrong partition, which would be very bad.
I flashed a Hulk boot splash screen from the Marvel theme thread. I need my phone back 100% stock so I flashed latest firmware with odin. To my surprise the hulk splash screen is still present. I did some digging around and think i need to replace the Param.bin. Does anyone know how to do that, and where i can get one?
http://forum.xda-developers.com/showthread.php?t=3212126
Custom bootlogo for Exynos 7420 devices
@954wrecker Thanks for link, i appreciate you pointing me in the right direction.