Boot Logo issue - myTouch 3G, Magic Android Development

Hi all,
I am quite new to android, I got my Magic few days ago.
I did tried to root the machine and found the wifi can't start.
Then i found a recovery program and tried to use that to restore my machine.
That was successful but found that is Taiwan ChungWah ROM with "Hami" boot logo with it.
So I flash it again to HK official rom BUT the "Hami" boot logo is still there, can anyone please help me with this problem? I just want to restore my magic to HK official status...
Also does anyone knows what is the SPL version of HK ROM? Can I flash it back to official SPL after flashing the ROM?
Thanks!

Check your motherboard.
This is essential to further your progress in rooting your device.
Turn off your device.
Now, power it on while holding the POWER KEY + VOLUME DOWN - this will load the information directly from your phone for display.
Write down what you see.
Then seek out assistance based on your motherboard version.
Good luck.

I want to replace boot logo as well , how can I ?
Hello, is there anyway can replace Taiwan Magic's Hami boot logo ? I try the fastboot flash method and it does not work. Is there anyone know how to replace ? thanks

wenwei.yang said:
Hello, is there anyway can replace Taiwan Magic's Hami boot logo ? I try the fastboot flash method and it does not work. Is there anyone know how to replace ? thanks
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=HTC_Sapphire_Hacking_2 see Flashing a new splash screen
Read read read b4 you post!

*sigh* this belongs in general.
XDA needs mods to move threads, its sickening how people dont know to post in the right SECTION

WaterMan! said:
*sigh* this belongs in general.
XDA needs mods to move threads, its sickening how people dont know to post in the right SECTION
Click to expand...
Click to collapse
Almost as sickening as your constant whinging about other peoples posts

Thanks for njakopos, but I still cannot splash
I read the wikki and excute the right image/command after fastboot, but it shows error verifying. my phone was rooted with myhero 008 version. is there any other ways to replace the Hami logo ?

njakobs said:
http://wiki.xda-developers.com/index.php?pagename=HTC_Sapphire_Hacking_2 see Flashing a new splash screen
Read read read b4 you post!
Click to expand...
Click to collapse
this program just support G1 not for G2
I got the same problem~ could anyone plz tell me how to flash the splash screen into what the other htc branded G2's splash screen

my problem was found , read the article and follow up the instruction
my problem was found , read the article and follow up the instruction
I need to flash SPL to be able to change the boot logo
http://forum.xda-developers.com/showpost.php?p=3843361&postcount=7

Related

HELP!! Cant use my Wizard anymore

Hi guys i'm pretty new in this scene and i did something stupid...
i've downloaded Win Mobile 6 from usenet and installed it without reading
anything. At 95% of the installation it hangs and when i try to recover it doesnt work. Now i only have the screen with the green red and blue at the background. I've tried a hard reset but that doesnt work either and i tried to search by google and found nothing.
Am i right that i had to remove some kind of G4 lock? And does somebody know how to help me getting things started again.....
thnx in advance.
greetz
JohnGotti
do your carriers flash and let it fully finish. Once thats done, read a little on making sure your device is unlocked and once you get that done, youll be ready to move to the next level.
what your device is g3 or g4?
how do i perform such a flash and how can i see what kind of G3/4 i have??
If you got a G4 or G3 IPL/SPL 2.x:
Try flasing wizard_love rom from the bootloader screen.
If you got IPL/SPL 1.x:
flash button_rom from the bootloader screen.
damn thats a whole mouth full and i dont get it how its intended.....
perhaps you can tell me in dutch or in a language a stupid fool can understand
JohnGotti said:
damn thats a whole mouth full and i dont get it how its intended.....
perhaps you can tell me in dutch or in a language a stupid fool can understand
Click to expand...
Click to collapse
See you're private messages!
ok thank you
i have the same problem..and i've tried all versions,RUU_mUn_aRTM_10_2_0_8_WWEx.exe, Wizard_Love_2[1].26.10.2_WWE_Novii_CF2.exe, Molski[1].Biz_AKU3.3_21911_8MB_Crossbow.rar...and now when i open it, shows me for 1 second the bootloader screen, and then it's shutting down himself..what should I do???
ady_uaic said:
i have the same problem..and i've tried all versions,RUU_mUn_aRTM_10_2_0_8_WWEx.exe, Wizard_Love_2[1].26.10.2_WWE_Novii_CF2.exe, Molski[1].Biz_AKU3.3_21911_8MB_Crossbow.rar...and now when i open it, shows me for 1 second the bootloader screen, and then it's shutting down himself..what should I do???
Click to expand...
Click to collapse
You should provide more information... What phone model is this? Is it a G3 or G4? What is your IPL / SPL? What did you do before this started happening? Was the battery fully charged before you started this process? Did your PC give you errors when you tried to do teh initial flash that started this process?
The more information you provide the better we can help.
If your phone won't stay turned on when its on the bootloader (rainbow screen) then either your battery is almost dead, or you may have bricked your phone. But we need more details.
this happened to me once, i almost had an heart attack.. but anyway.. what u get there is the bootloader mode, which is you can still save the phone.. when this happened to me, all i did was, i upgraded to original tmobile rom, and from there i ve used shell tool to upgrade to wm6 (my wizard is not unlocked but shelltool takes care of that and u dont have to worry).. its really easy.. let me know what happened.. no worries
Dont worry guys... I think most of us here, faced the same things before, Me included.
Everybody here is quite nice and will help u in any way we can..
Just do some research and fact finding before u flash your rom..
One of the article that I think is very helpful to me is Dr P post on how to unlock and flash your wizard.
If you have any problem or question after reading that, just ask.
Hopefully u can find your answer and your wizard are all healthy..
mfrazzz said:
You should provide more information... What phone model is this? Is it a G3 or G4? What is your IPL / SPL? What did you do before this started happening? Was the battery fully charged before you started this process? Did your PC give you errors when you tried to do teh initial flash that started this process?
The more information you provide the better we can help.
If your phone won't stay turned on when its on the bootloader (rainbow screen) then either your battery is almost dead, or you may have bricked your phone. But we need more details.
Click to expand...
Click to collapse
my phone is G4...first, when i tryed to change the rom, on 95% was blocked..and i have wait about 20 minutes, and nothing...the spl is....01...the battery was quite full, but after several tries, i don't know now how it is (i supose to be from the battery, but i still need a very good rom for it)
ok.. here are the steps.. its very easy.. i had the samething..
your phone is probably CID locked and you will need a shelltool to install that ROM.. so what you need to do is just download the original tmobile ROM.. and connect the phone and install the original ROM.. You didnt birck the phone because you get the bootloader screen.. which means, you can still save the phone..
anyway.. connect the phone via usb and install after you install the original wm5, download the shelltool from here and follow the instructions.. and install the ROM via shelltool.. Then you should be good to go with the new
wm6.
http://forum.xda-developers.com/show...ght=CID+unlock
ok, but where can i get that original rom?
rom
ady_uaic said:
ok, but where can i get that original rom?
Click to expand...
Click to collapse
if you cant get the tmobile rom
use the wizard love rom you can get it from here http://rapidshare.com/users/EXGZ7T
flash this rom not using the shell tool once flashed the use the shell tool following all the instructions and it should work
now i've installed RUU_mUn_aRTM_10_2_0_8_WWEx.exe (i've tried and that version also, but same situation) and after reflashing, it shows me windows mobile screen, and then restart the phone...what should I do??? i've tried many roms...could someone please give me an original rom, in english?
ady_uaic said:
now i've installed RUU_mUn_aRTM_10_2_0_8_WWEx.exe (i've tried and that version also, but same situation) and after reflashing, it shows me windows mobile screen, and then restart the phone...what should I do??? i've tried many roms...could someone please give me an original rom, in english?
Click to expand...
Click to collapse
Simple: Go to the Wizard Upgrading forum and in the stickies is a post by Dr. Putingham on how to CID Unlock your device. Scroll to the bottom of the first post and there is a direct link to pull the Tmobile 2.26 official ROM.
But as EasyMob suggested (and gave a link to) you may be better off with teh Wizard Love rom since you are a G4 device. Wizard Love ROM is very good at recovering G4 devices.
mfrazzz said:
Simple: Go to the Wizard Upgrading forum and in the stickies is a post by Dr. Putingham on how to CID Unlock your device. Scroll to the bottom of the first post and there is a direct link to pull the Tmobile 2.26 official ROM.
But as EasyMob suggested (and gave a link to) you may be better off with teh Wizard Love rom since you are a G4 device. Wizard Love ROM is very good at recovering G4 devices.
Click to expand...
Click to collapse
OK..I'm agree with you, but please understand: I've tried that version too...same situation...please give me the link with the Tmobile 2.26 official ROM
ady_uaic said:
please give me the link with the Tmobile 2.26 official ROM
Click to expand...
Click to collapse
If you read my previous post, I gave you exactly how to find the link (Hint, its in the first post of Dr. Putingham's sticky in the Wizard Upgrading forum and the title is about How to CID Unlock your device. Was that too hard?
i believe you, but i can't find it...and about 3 days i'm hopeless, because with any ROM version, the phone is still restarting, after reflashing (i didn't flash it with tmobile original rom)...please please, give me the link of the topic...

Wont Boot

I am a little confused. I have been trying to get WM6 on my T-mobile Wizard and actually got TNT 1.1 loaded and was working fine. I found that I could no longer view my contacts. The page would appear and then as quickly as it appeared it disappeared.
So I figured, I at least got it this far. I will just reload this rom and see if perhaps something did load right. Well after the reload. The phone boots up to the splash screen with IPL\SPL numbers and just sits. NOTHING.
I left it there for like 2 hours and still nothing. But I can still get into the BootLoader.
My questions to you gurus is:
Is the phone fubared?
Can I do some kind of master reset?
Why would it tell me "Invalid Vendor ID" when trying to flash the orginal T-mobile rom?
Are there any tools that can help me out? Paid\free?
Please help!!! Seriously! Please HELP!!!
Very much appreciated.
Thanks
Drunknasty said:
I am a little confused. I have been trying to get WM6 on my T-mobile Wizard and actually got TNT 1.1 loaded and was working fine. I found that I could no longer view my contacts. The page would appear and then as quickly as it appeared it disappeared.
So I figured, I at least got it this far. I will just reload this rom and see if perhaps something did load right. Well after the reload. The phone boots up to the splash screen with IPL\SPL numbers and just sits. NOTHING.
I left it there for like 2 hours and still nothing. But I can still get into the BootLoader.
My questions to you gurus is:
Is the phone fubared?
Can I do some kind of master reset?
Why would it tell me "Invalid Vendor ID" when trying to flash the orginal T-mobile rom?
Are there any tools that can help me out? Paid\free?
Please help!!! Seriously! Please HELP!!!
Very much appreciated.
Thanks
Click to expand...
Click to collapse
if your device is G3, unlocking is required to flash any rom, before upgrade your device, it is recommended to flash an official WM5.0 rom (in your case T-Mobile rom) with IPL and SPL 2.xx then flash again.
in general there are many probabilities for your issue.
((Where is TNT1.1?? did you mean 1.0?? ))
My Bad meant 1.0
So to get it straight.... I will need to unlock my phone each time?
Oh and to correct myself again, when flashing with the T-mobile ROM it says UPGRADE ONLY. And the read me file says its the wrong RUU. But it is the same file from Tmobile I used when I first got the phone. But I will try again.
Are there any other suggestions?
You need to read the "how to flash" sticky.
I did. I am not any expert or anything but I believe the phone is unlocked already since I once had WM6 on my phone. The real issue I am having is that it wont boot past the splash screen after flashing.
And that is true when re following the steps in guide. After flashing to the button rom it will not boot past the splash screen.
Try another ROM.
Sounds like you need the "Wizard Love" rom. I dont have the link handy but I am sure someone else does.
Drunknasty said:
I did. I am not any expert or anything but I believe the phone is unlocked already since I once had WM6 on my phone. The real issue I am having is that it wont boot past the splash screen after flashing.
And that is true when re following the steps in guide. After flashing to the button rom it will not boot past the splash screen.
Click to expand...
Click to collapse
Already got it. Thanks I am trying to load it now. But the only thing is that the last time it failed and I can understand what the error says. I know the number is 300 but can read the language.
But I will let you guys know when this load completes.
Thanks again for all the assistance.
No worky worky. The load completed and then boots the splash screen shows and then stays there.
Any ideas?
Try to remove the battery and let it out for at least half an hour. Then put it back in and see what it does then.
I thought the same thing too. So when it got done last night, out of frustration, I removed the battery and left it there to wait on when I get off work today. I will report back on what happens.
Again I would like to thank you guys for helping me. I really do appreciate it!
STEP 1 install the original manufacturer ROM
T-mobile UK
http://www.tm-phonedownloads.com/download_manager_mda_vario.html
T-mobile US
http://www.t-mobile.com/wmupgrade/
Search for the original rom for any other
instructions on how to use the original rom can be found here
http://support.t-mobile.com/knowbase/root/public/tm23294.htm?&A2L.SERVICE=AboutUpgrading
Put it in the bootloader mode.. ( three color screens )
hope this helps..
cheers
Praneet
Ok I did that and it gave me ERROR 296: UPGRADE ONLY
Then it tells me that the NBF file cannot be used for my PDA Phone. Please get newer NBF file.
Is there any way I can get the Tmobile splash and IPL\SPL number back to original, it doesnt need to boot all the way into WCE but atleast show the same numbers and splash during boot up?
Or any other way to get this thing to work?
Thanks guys
BTW it is a HTC Wizard from T-mobile.
If you are getting an error 300 you need a newer rom update utility, and regardless if your phone is a G3 or G4 it needs to be unlocked before you flash any rom.. LOAD a OFFICIAL cingular ROM onto your device before going any further, then unlock your phone either via www.imei-check.com or through some of the tools offered here...
Which one should I down load from Cingular? Even though I have a Tmobile phone?
what ipl and spl are you using and what radio are you using. Just post all the numbers from the bootloader
As soon as I get home, I will post them.
Thanks
Ipl 1.01
Spl 3.08
Thanks
Drunknasty said:
Ipl 1.01
Spl 3.08
Thanks
Click to expand...
Click to collapse
uh oh. someone tell me if I'm wrong, but I think this is bad. it's the result of flashing a g4 with g3 or the other way around... keep searching, and good luck.
flash the original t-mobile rom. your phone doesn't appear to be unlocked. good luck

kaiser white screen_not possible upload radio, ROM or anything else, pls help !!!!

Hello to everybody
I am having a strange problem with my kaiser vodafone, come up with white screen and does not work at all, is just possible have the tricolor screen using switch + camera keys, a this point I have tried to install new ROM, HARD SPL etc. the loading bar come up on screen but nothing happen,
I did plenty of suggestion reading around the forum but nothing is working, look like is a hardware faulty ????
So please if somebody expert on the matter can let me know something to do will be appraciate ...
thanks in advance
kissabout2002 said:
Hello to everybody
I am having a strange problem with my kaiser vodafone, come up with white screen and does not work at all, is just possible have the tricolor screen using switch + camera keys, a this point I have tried to install new ROM, HARD SPL etc. the loading bar come up on screen but nothing happen,
I did plenty of suggestion reading around the forum but nothing is working, look like is a hardware faulty ????
So please if somebody expert on the matter can let me know something to do will be appraciate ...
thanks in advance
Click to expand...
Click to collapse
please post this in the appropriate thread...like for example the HARDSPL thread. For example the one dealing with the white screen issue specifically. Try searching "hard spl white screen"
kissabout2002 said:
Hello to everybody
I am having a strange problem with my kaiser vodafone, come up with white screen and does not work at all, is just possible have the tricolor screen using switch + camera keys, a this point I have tried to install new ROM, HARD SPL etc. the loading bar come up on screen but nothing happen,
I did plenty of suggestion reading around the forum but nothing is working, look like is a hardware faulty ????
So please if somebody expert on the matter can let me know something to do will be appraciate ...
thanks in advance
Click to expand...
Click to collapse
for starters wrong thread .. secondly problem could have been completely avoided if you did the basic reading i.e. first hardspl .. if white screen than follow thread on white screen fix .. got hardspl? flash rom ... simple as that.
now u need help .. and instead of posting under the right thread you create a new redundant thread asking about a problem that quite a few people run into. in order for us to help we need info from your phone .. what does bootloader say? can u boot to operating system?
thesire said:
for starters wrong thread .. secondly problem could have been completely avoided if you did the basic reading i.e. first hardspl .. if white screen than follow thread on white screen fix .. got hardspl? flash rom ... simple as that.
now u need help .. and instead of posting under the right thread you create a new redundant thread asking about a problem that quite a few people run into. in order for us to help we need info from your phone .. what does bootloader say? can u boot to operating system?
Click to expand...
Click to collapse
sorry but I did not where put my problem, I did try to resolve it reading lots of other thread and I try lots of solution but nothing, anyway thanks for your help and time, so the problem with my kaiser is that it power up with white screen and nothing else happened then I have to take off the battery and put in again then pressing power button and camera I got the tricolor screen
http://www.ssb7.net/members/watch/image_view.php?path=http://www.ssb7.net/users/25415/&file=k3.jpg
connect to the computer running XP I try to update ROM or RADIO or SPL but the result is all the same this:
http://www.ssb7.net/members/watch/image_view.php?path=http://www.ssb7.net/users/25415/&file=k2.jpg
with the result on the computer:
http://www.ssb7.net/members/watch/image_view.php?path=http://www.ssb7.net/users/25415/&file=k1.jpg
a this point I have to take away the battery,
let me know if you need more information
thanks
Acky
You don't have hardspl installed. Install the hardspl, white screen fixed.
Follow the directions exactly. This is your freebie
http://forum.xda-developers.com/showthread.php?t=354061
P1Tater said:
You don't have hardspl installed. Install the hardspl, white screen fixed.
Follow the directions exactly. This is your freebie
http://forum.xda-developers.com/showthread.php?t=354061
Click to expand...
Click to collapse
thanks mate but how can I copy JumpSPL1.56-KAIS.exe to the device and run it if the device does not work ?
regards
Acky
well if nobody else is able to help I have to throw away this stupid expensive phone :-(
kissabout2002 said:
well if nobody else is able to help I have to throw away this stupid expensive phone :-(
Click to expand...
Click to collapse
Before you get too upset, have you tried posting in the correct thread? Just like was suggested over a week ago? Have you tried a hard reset? I don't see that anywhere in your steps you took. What about flashing a stock rom?
skatdawg said:
Before you get too upset, have you tried posting in the correct thread? Just like was suggested over a week ago? Have you tried a hard reset? I don't see that anywhere in your steps you took. What about flashing a stock rom?
Click to expand...
Click to collapse
thanks for help , I tried hard reset but then the same problem, about flash STOCK ROM how can I do that?
regards
Acky
kissabout2002 said:
thanks for help , I tried hard reset but then the same problem, about flash STOCK ROM how can I do that?
regards
Acky
Click to expand...
Click to collapse
You download the stock kaiser rom (searching is fun!), then you unrar, and click on the phone like button and follow the instructions. Then again, theres a thread on returning your phone to its original config. More searching fun!
kissabout2002 said:
well if nobody else is able to help I have to throw away this stupid expensive phone :-(
Click to expand...
Click to collapse
Don't trash, I will be happy to pay for shipping charges on it to ship it here
I cannot find UK VODAFONE STOCK ROM original 6.0, somebody knows where is possible found it?
thankssssss

Error [244] : Invalid model id

After loading the Stylez Black v.4 WM6.1 21051 D3D 101MB Full rom my phone give some problems, so i want to go back to the T-Mobile ROM.
But when i am trying to get this rom on the phone with this help i get now the ERROR [244] : INVALID MODEL ID warring, and looked with the search here but i get a lot of different options soms topics are more than 2 years old and that is not working.
So, what can i do to load a new rom or how do i get the orginal rom back on the phone?
plz help....
Thanks in advance...
Maybe this can help you http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
Or this too http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
No solutions found...
Anyone ?? Please?
Hard-SPL bypasses Vendor Model check so shouldn't have any problem flashing any stock ROM have you tried others? Try and flash a HTC or AT&T stock, just a bizarre thing as everyone flashes stocks at some point especially if nearly brick and peeps generally flash stocks to bypass 6.5 hard-reset issue.
Can you go into bootloader and reply with Hard-SPL you have?
Also another way is to try flashing via SD, info in the flashing for noobs guide in sticky.
Same Issue
Hi,
I also use Hard SPL to flash new ROMs, however i also face the same issue with certain roms, currently i remember i has similar issues with ATNT rom.
Ok, or i am a realy noob or i doing somthing wrong...
Now when ik start the phone i get the Tri Color : (Red, Green, Blue Screen)
I did a hard reset en now the phone shows the boot screen (Stylez)
When i take the batterij off and put it in after 20 secs again or the tri color or the boot screen is loading or the screen is black.....
Please don't say that i can trow him into the trash...
All you have described there is normal. Now just follow the noobs guide to flashing in the sticky and do everything it says word for word. If the usb method doesnt work then use the sd card way.
stuntdouble said:
All you have described there is normal.
Click to expand...
Click to collapse
Ok, best news this week for me...
stuntdouble said:
Now just follow the noobs guide to flashing in the sticky and do everything it says word for word. If the usb method doesnt work then use the sd card way.
Click to expand...
Click to collapse
Sorry but i want to be shure, you mean this topic?
And if so, how do i load the rom?
Because the phone is not starting up normal,...
If you want i can make screenshots from the pc and make images so you can see?
Sorry for this noob questions....
Yes that is the thread I meant. So did you follow all that was said to do in the link about kaiser stuck at tri colour screen bootloader?
Ok, tryed but with the boot screen and with the Tri Color screen i can not make any USB connection with MTTY, when i start the kaiser with the camera button and with the powerbuton i can connect (USB is also an option (COM1 and COM2 also)).
But is this a correct move?
*contacted user via MSN*
Also tried several steps using the SD card but the phone will still hang into the tri-colour. It says loading, but won't reboot or do anything else.
Suggestions are still open.
FYI: It's a branded phone and wasn't CID-unlocked before. (Still not AFAIK)

Help! Stuck at HTC splash screen...I'll donate $$

Ok, so I am stuck at the white HTC spash screen, in the bottom left corner it says:
B 04
R 2.35.00WV
P DSDCANPZM-6125
D 4.01.93615
I had EnergyROM GTX, and I was flashing to this stock MR2 release and it flashed, and on first boot it is now stuck on the screen.
EDIT: Fixed! Check my 6th post, it was the steps I took to fix it.
You need to re-lock your phone to flash that update:
http: //forum. xda-developers. com/showpost. php?p=6838067&postcount=3
You'll see in the HSPL notes that there's a protection built in to prevent re-locking:
NOTE 2: this is unsigned Hard-SPL. no limitations on flashing ROMs (except of course some Radio roms). also, this has overwrite protection against HTC RUU's overwriting HSPL with a stock one, so if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is posted here below. use this relocker *only* if you need to return the phone for warranty, and only use it as last step - after reflashing stock OS and radio. see steps at the end of this post about how to reflash stock SPL.
Click to expand...
Click to collapse
Since I can't post links outside of the forums, take out the spaces here to get the link to relock your device - scroll down to the bottom to where it says "how to reflash Stock":
http :// rhodiumw. htc-unlocks. com/hard-spl. php
well, i cant get it synced with active sync so how do i get it to talk with the computer?
Bootloader
Ok, i got into bootloader.
then what, run the bootloader relocker on post 2 of this thread: http://forum.xda-developers.com/showthread.php?t=578660
im confused the order in what to do things...anyone have a little more in depth info?
still get the white HTC screen after running the relocker...am i now supposed to flash the MR2 ROM update??
Ok I got it!
If stuck on the white HTC screen, get into bootloader on power (volume down + power button). I had to be holding them as I put the battery back in to get it to restart into it.
Once in bootloader, run this relocker
After that, get into bootloader again because you will still have the white HTC screen. Once in bootloader, run the MR2 update
It takes some time, I thought at first it was stuck again at the same screen, but be patient. It will load...
hope this helps!
You dont need to relock. Just put in boot loader and flash...
ai6908 said:
You dont need to relock. Just put in boot loader and flash...
Click to expand...
Click to collapse
to flash to this particular official update you MUST relock as stated on the posts above if you have been using a custom ROM.
without it you will always get a stuck htc screen.
Attempting to relock
I know this is an old thread, but I have been having trouble with a device for several weeks. I decided to give this relock and reflash stock ROM suggestion a try, but the relock sits at 0% and doesn't move. Any ideas what the problem may be?
Thank you!
HTC Touch pro 2 verizon GSM
Hi, i have a problem , I have a htc touch pro 2 verizon , i think its GSM because i can put a sim card in it , which am currently using with it now. the info below is the information for it. for some reason i can only load the mightyrom on it , when i try to load anything else it just gets struck at the bootscreen logo and thats it. i dont like the mightyrom , i wan to load something else on it , what rom is recommended and what process to go through without bricking the phone
B 04
R 2.35.00WV
P. DSDCANPZM-6125
D. 2.04.82488
RHOD500 32 SS-BC
SPL-1.00.01iNex
raven2k7 said:
Hi, i have a problem , I have a htc touch pro 2 verizon , i think its GSM because i can put a sim card in it , which am currently using with it now. the info below is the information for it. for some reason i can only load the mightyrom on it , when i try to load anything else it just gets struck at the bootscreen logo and thats it. i dont like the mightyrom , i wan to load something else on it , what rom is recommended and what process to go through without bricking the phone
B 04
R 2.35.00WV
P. DSDCANPZM-6125
D. 2.04.82488
RHOD500 32 SS-BC
SPL-1.00.01iNex
Click to expand...
Click to collapse
Did you try reflashing the verizon shipped rom?

Categories

Resources