Is there any way to actually pull all three of the existing startup splash screens off the Wizard? Would like to pull them off, edit them, and put them back on again. I know how to do the latter, but cannot locate any directions (if it is even possible) on how to pull them off into an editable format.
Thanx.
isamts said:
Is there any way to actually pull all three of the existing startup splash screens off the Wizard? Would like to pull them off, edit them, and put them back on again. I know how to do the latter, but cannot locate any directions (if it is even possible) on how to pull them off into an editable format.
Thanx.
Click to expand...
Click to collapse
I don't think that's possible. Not sure dough. I tried it, but you cannot restore properly splashscreen 1 and 2
anichillus said:
I don't think that's possible. Not sure dough. I tried it, but you cannot restore properly splashscreen 1 and 2
Click to expand...
Click to collapse
So, the only way to fix a problem on the first splash is to start all over and reflash it?
Thanx.
isamts said:
So, the only way to fix a problem on the first splash is to start all over and reflash it?
Thanx.
Click to expand...
Click to collapse
yes, of that I'm sure
My little contribution.
I hope you like it.
Safe for use with G4 and G3.
Enjoy.
Run the update utility as always. It will only flash the boot screen.
Best Regards.
charly_mx said:
I hope you like it.
Safe for use with G4 and G3.
Enjoy.
Run the update utility as always. It will only flash the boot screen.
Best Regards.
Click to expand...
Click to collapse
That's all fine and dandy. However, I am looking to edit my own screens that I've already flashed to the device. I was hoping there would be a way for me to extract them back off so I could just change a little something. I guess that's what I get for not saving a copy, eh?
If you want.
isamts said:
Is there any way to actually pull all three of the existing startup splash screens off the Wizard? Would like to pull them off, edit them, and put them back on again. I know how to do the latter, but cannot locate any directions (if it is even possible) on how to pull them off into an editable format.
Thanx.
Click to expand...
Click to collapse
If you want me to make a bootscreen with an image of your preference design it in bmp 240 x 320. attach it to this thread and i will make the flash tool to flash only your startup screen.
Best regards.
charly_mx said:
If you want me to make a bootscreen with an image of your preference design it in bmp 240 x 320. attach it to this thread and i will make the flash tool to flash only your startup screen.
Best regards.
Click to expand...
Click to collapse
Thank you for the offer, but I already know how to flash the screens to the device. I was just trying to extract an existing screen from my ROM so I might edit it and then re-flash it.
I have to give the forum props though...so many peeps all wanting to help out. Thanx.
charly_mx said:
I hope you like it.
Safe for use with G4 and G3.
Enjoy.
Run the update utility as always. It will only flash the boot screen.
Best Regards.
Click to expand...
Click to collapse
Nice work there. I like it
yea this is nice im using this one
Here's a couple of screens that I think may be what you are looking for (or very close). One is the HTC Logo (but its bigger than whats in the Faria and nottoosmart roms). The other is the Black screen with the world and the Windows logo over it.
isamts said:
Thank you for the offer, but I already know how to flash the screens to the device. I was just trying to extract an existing screen from my ROM so I might edit it and then re-flash it.
I have to give the forum props though...so many peeps all wanting to help out. Thanx.
Click to expand...
Click to collapse
I've tried it and I can only see the file on my device with that rom! I can't view the file on any other rom and my pc. The 3 splash screens, as far as I know can cut back to two. You can have the same splash for both but its the same pic twice.
update 4-10-2007
Finally got pic to be seen on pc. I wanted to change the 3rd or welcome secreen so I renamed my pic and replaced what was already on my device. It works but not in landscape, no big deal...I don't boot with my keyboard open anyways.
mb
charly_mx said:
If you want me to make a bootscreen with an image of your preference design it in bmp 240 x 320. attach it to this thread and i will make the flash tool to flash only your startup screen.
Best regards.
Click to expand...
Click to collapse
charly, is it possible to have a nk file with the MB ROM splash? it's the one that is inside the splashes.zip in this thread...
thanks!!
isamts said:
Is there any way to actually pull all three of the existing startup splash screens off the Wizard? Would like to pull them off, edit them, and put them back on again. I know how to do the latter, but cannot locate any directions (if it is even possible) on how to pull them off into an editable format.
Thanx.
Click to expand...
Click to collapse
ok you can do this but not in the exact way you specified.
The way i did it is to take the rom that has the splash screens in it and dump it, I used Molski.biz rom tools, I won't go into detail about dumping a rom. use typo5.exe
then i used bcl.exe to extract the .nb files into bmp
I am not going to do a step by step here that is the general idea.
I don't know how to get a rom off a phone but if you have the rom that you put on the phone dump it and grab the splash screens from it.
the tools i used are in molski's devpack
btw the 3rd splash screen is a png file in the rom with some stupid name it is um welcomehead.96.png and it is actually a perfect 320 square so that it will load nicely in both portrait or landscape mode
I attached a Scarface splash screen I made using the HTC logo extracted from splash screen one of one of the newer roms
charly_mx said:
I hope you like it.
Safe for use with G4 and G3.
Enjoy.
Run the update utility as always. It will only flash the boot screen.
Best Regards.
Click to expand...
Click to collapse
thanks a lot! now my wizard is good than ever!
G4 locked
Hello charley-mx
can a flash this on my G4 locked vario, i us the xplore1.1 rom of anichillus
its fantastic, i wil flash only de screen whit the spl ipl numbers still tmobile screen is comming i dont like that sorry for my bad english
thanks all
I am a newbie. How do I know whether my phone is a G3 or G4. I am using Dopod 838. Can someone show me how to change the boot screen and to use the update utility safely.
Thanks in advance.
Go read the wiki.
To tell the difference between a G3 and a G4 wizard, you must look at the IPL and SPL versions. To find out what IPL/SPL version your Wizard has, turn the device off and back on. At the first splash screen, the IPL and SPL versions will be written in red at the top of the screen.
A G3 Wizard will have the following IPL: 1.xx or 2.xx or 2.xx.00x (Note that this version only has TWO 0's.).
SPL: 1.xx or 2.xx or 2.xx.00x (Note that this version only has TWO 0's.)
A G4 Wizard will have the following IPL: 2.xx.000x (Note that this version has THREE 0's.)
SPL: 2.xx.000x (Note that this version has THREE 0's.)
adriansaza said:
I am a newbie. How do I know whether my phone is a G3 or G4. I am using Dopod 838. Can someone show me how to change the boot screen and to use the update utility safely.
Thanks in advance.
Click to expand...
Click to collapse
just follow the steps.
adriansaza said:
I am a newbie. How do I know whether my phone is a G3 or G4. I am using Dopod 838. Can someone show me how to change the boot screen and to use the update utility safely.
Thanks in advance.
Click to expand...
Click to collapse
Just follow the steps posted on page 1 carefully. It wont damage anyhow your device (well i hope so)
Sorry for the delay
eljoe said:
charly, is it possible to have a nk file with the MB ROM splash? it's the one that is inside the splashes.zip in this thread...
thanks!!
Click to expand...
Click to collapse
I was on vacations m8.
Here you go. Enjoy !: )
Best regards.
Related
I am a little confused. I have been trying to get WM6 on my T-mobile Wizard and actually got TNT 1.1 loaded and was working fine. I found that I could no longer view my contacts. The page would appear and then as quickly as it appeared it disappeared.
So I figured, I at least got it this far. I will just reload this rom and see if perhaps something did load right. Well after the reload. The phone boots up to the splash screen with IPL\SPL numbers and just sits. NOTHING.
I left it there for like 2 hours and still nothing. But I can still get into the BootLoader.
My questions to you gurus is:
Is the phone fubared?
Can I do some kind of master reset?
Why would it tell me "Invalid Vendor ID" when trying to flash the orginal T-mobile rom?
Are there any tools that can help me out? Paid\free?
Please help!!! Seriously! Please HELP!!!
Very much appreciated.
Thanks
Drunknasty said:
I am a little confused. I have been trying to get WM6 on my T-mobile Wizard and actually got TNT 1.1 loaded and was working fine. I found that I could no longer view my contacts. The page would appear and then as quickly as it appeared it disappeared.
So I figured, I at least got it this far. I will just reload this rom and see if perhaps something did load right. Well after the reload. The phone boots up to the splash screen with IPL\SPL numbers and just sits. NOTHING.
I left it there for like 2 hours and still nothing. But I can still get into the BootLoader.
My questions to you gurus is:
Is the phone fubared?
Can I do some kind of master reset?
Why would it tell me "Invalid Vendor ID" when trying to flash the orginal T-mobile rom?
Are there any tools that can help me out? Paid\free?
Please help!!! Seriously! Please HELP!!!
Very much appreciated.
Thanks
Click to expand...
Click to collapse
if your device is G3, unlocking is required to flash any rom, before upgrade your device, it is recommended to flash an official WM5.0 rom (in your case T-Mobile rom) with IPL and SPL 2.xx then flash again.
in general there are many probabilities for your issue.
((Where is TNT1.1?? did you mean 1.0?? ))
My Bad meant 1.0
So to get it straight.... I will need to unlock my phone each time?
Oh and to correct myself again, when flashing with the T-mobile ROM it says UPGRADE ONLY. And the read me file says its the wrong RUU. But it is the same file from Tmobile I used when I first got the phone. But I will try again.
Are there any other suggestions?
You need to read the "how to flash" sticky.
I did. I am not any expert or anything but I believe the phone is unlocked already since I once had WM6 on my phone. The real issue I am having is that it wont boot past the splash screen after flashing.
And that is true when re following the steps in guide. After flashing to the button rom it will not boot past the splash screen.
Try another ROM.
Sounds like you need the "Wizard Love" rom. I dont have the link handy but I am sure someone else does.
Drunknasty said:
I did. I am not any expert or anything but I believe the phone is unlocked already since I once had WM6 on my phone. The real issue I am having is that it wont boot past the splash screen after flashing.
And that is true when re following the steps in guide. After flashing to the button rom it will not boot past the splash screen.
Click to expand...
Click to collapse
Already got it. Thanks I am trying to load it now. But the only thing is that the last time it failed and I can understand what the error says. I know the number is 300 but can read the language.
But I will let you guys know when this load completes.
Thanks again for all the assistance.
No worky worky. The load completed and then boots the splash screen shows and then stays there.
Any ideas?
Try to remove the battery and let it out for at least half an hour. Then put it back in and see what it does then.
I thought the same thing too. So when it got done last night, out of frustration, I removed the battery and left it there to wait on when I get off work today. I will report back on what happens.
Again I would like to thank you guys for helping me. I really do appreciate it!
STEP 1 install the original manufacturer ROM
T-mobile UK
http://www.tm-phonedownloads.com/download_manager_mda_vario.html
T-mobile US
http://www.t-mobile.com/wmupgrade/
Search for the original rom for any other
instructions on how to use the original rom can be found here
http://support.t-mobile.com/knowbase/root/public/tm23294.htm?&A2L.SERVICE=AboutUpgrading
Put it in the bootloader mode.. ( three color screens )
hope this helps..
cheers
Praneet
Ok I did that and it gave me ERROR 296: UPGRADE ONLY
Then it tells me that the NBF file cannot be used for my PDA Phone. Please get newer NBF file.
Is there any way I can get the Tmobile splash and IPL\SPL number back to original, it doesnt need to boot all the way into WCE but atleast show the same numbers and splash during boot up?
Or any other way to get this thing to work?
Thanks guys
BTW it is a HTC Wizard from T-mobile.
If you are getting an error 300 you need a newer rom update utility, and regardless if your phone is a G3 or G4 it needs to be unlocked before you flash any rom.. LOAD a OFFICIAL cingular ROM onto your device before going any further, then unlock your phone either via www.imei-check.com or through some of the tools offered here...
Which one should I down load from Cingular? Even though I have a Tmobile phone?
what ipl and spl are you using and what radio are you using. Just post all the numbers from the bootloader
As soon as I get home, I will post them.
Thanks
Ipl 1.01
Spl 3.08
Thanks
Drunknasty said:
Ipl 1.01
Spl 3.08
Thanks
Click to expand...
Click to collapse
uh oh. someone tell me if I'm wrong, but I think this is bad. it's the result of flashing a g4 with g3 or the other way around... keep searching, and good luck.
flash the original t-mobile rom. your phone doesn't appear to be unlocked. good luck
Hi everyone,
let see if someone can help me.
I have a G4 locked device so, all the wm6 roms that i use i aply by shell tools.
everytime that i do this, i need first downgrade to wm5 (using wizard love) because my operator dont make your oficial rom avalible.
My problem now is: i have this ungly wizard love splashscreen but i can not overide this!!
already try to use a lot of diferents splashs, already build my nk in italian hacked. but nothing works.
what i do now?
boto said:
Hi everyone,
let see if someone can help me.
I have a G4 locked device so, all the wm6 roms that i use i aply by shell tools.
everytime that i do this, i need first downgrade to wm5 (using wizard love) because my operator dont make your oficial rom avalible.
My problem now is: i have this ungly wizard love splashscreen but i can not overide this!!
already try to use a lot of diferents splashs, already build my nk in italian hacked. but nothing works.
what i do now?
Click to expand...
Click to collapse
Of course you can change the Splash Screens. I have a G4 Wizard and now have XDA Mobile 6 and added the Splash screens that are here:
http://forum.xda-developers.com/showthread.php?t=310954
but you need to use the Update Utility from Wizard Love, just swap the nk.nbf file.
You can also use the Update Utility from Wizard Love to change the Radio ROM.
Kind Regards
Darren
dleeming said:
Of course you can change the Splash Screens. I have a G4 Wizard and now have XDA Mobile 6 and added the Splash screens that are here:
http://forum.xda-developers.com/showthread.php?t=310954
but you need to use the Update Utility from Wizard Love, just swap the nk.nbf file.
You can also use the Update Utility from Wizard Love to change the Radio ROM.
Kind Regards
Darren
Click to expand...
Click to collapse
hehe this i already do!
but dont works...that is my problem
i change the nk.nbf with only the splash screen, use the italian hacked ruu and flash.
my device change to boot mode, flash....but nothing change
boto said:
Hi everyone,
let see if someone can help me.
I have a G4 locked device so, all the wm6 roms that i use i aply by shell tools.
everytime that i do this, i need first downgrade to wm5 (using wizard love) because my operator dont make your oficial rom avalible.
My problem now is: i have this ungly wizard love splashscreen but i can not overide this!!
already try to use a lot of diferents splashs, already build my nk in italian hacked. but nothing works.
what i do now?
Click to expand...
Click to collapse
Download this kits and you will find that there is some batch files that will take a jpg and make it in to the boot screens and just make sure that you are only making the rom with the HTC and splash only.
http://forum.xda-developers.com/showthread.php?t=297027
This is what i use when i want to make new splash screens for my phone!
funman said:
Download this kits and you will find that there is some batch files that will take a jpg and make it in to the boot screens and just make sure that you are only making the rom with the HTC and splash only.
http://forum.xda-developers.com/showthread.php?t=297027
This is what i use when i want to make new splash screens for my phone!
Click to expand...
Click to collapse
i'm 100% sure that i have only htc logo (9d000000) and spalsh screen (92000000)
i build myself...
Try this:
http://forum.xda-developers.com/showthread.php?t=284006&page=19&highlight=bootscreen
It works fine for me
Luck!
Hi All
Hopefully a quick one this...
I am getting more into customising my device and am planning to hack my own ROM at some point onto my device. Starting off with some UC components which are working well, but I would like to learn more about how splash screens work on the kaiser.
I have successfully managed to replace the very first splash using a custom .NBH file and RUU, but would love to learn (if) how I can do the others. For example my current ROM which is Duttys displays the animated HTC logo with the custom wording on it "Dutty,s Series" AFTER the one I have flashed to my device. It then displays the green Windows Mobile Splash before finally getting to the OS GUI.
Is it possible to either remove or replace these two screens at all?
fractal47 said:
Hi All
Hopefully a quick one this...
I am getting more into customising my device and am planning to hack my own ROM at some point onto my device. Starting off with some UC components which are working well, but I would like to learn more about how splash screens work on the kaiser.
I have successfully managed to replace the very first splash using a custom .NBH file and RUU, but would love to learn (if) how I can do the others. For example my current ROM which is Duttys displays the animated HTC logo with the custom wording on it "Dutty,s Series" AFTER the one I have flashed to my device. It then displays the green Windows Mobile Splash before finally getting to the OS GUI.
Is it possible to either remove or replace these two screens at all?
Click to expand...
Click to collapse
I think one of them is welcomehead.96.png and one is called animated.gif. Both in \Windows\
You have to enable the animated one (there's a setting in scahps Advanced Config for this).
This been asked and answered wery many times, whit some searching you can find it all and more...
The first one is startup animation wich you find in the register:
[HKEY_LOCAL_MACHINE\Software\HTC\StartupAnimation]
"GIFFile"="\\Windows\\animated.gif"
Click to expand...
Click to collapse
The file can be of variouse names, animated.gif, animated1.gif or something completly diffrent so look for the one unders GIFFile.
Click and refresh for animation
The secound is the splashscreen wich is under
[HKEY_LOCAL_MACHINE\Software\Microsoft\Splash Screen]
"CarrierBitmap"="\\windows\\welcomehead.96.png"
Click to expand...
Click to collapse
Also that name can be diffrent..
For an easy way use Advance Config Tool By schaps and SEARCH before asking.
Good luck.
I had done a little searching and came across RSB-BMP Converting Tool and NBH Converting Tool.
The only issue was this appeared to be for Touch Pro (Raph) will these work on the TP2. I did not want to test it and brick my phone just for boot/splash images.
http://www.pocketpc-live.com/pocket-pc/how-to-change-splash-screen-of-touch-pro.html
But I like the roms I have used, but I would like to change the images. Any help would be great
I´m sure it will work on TP2 or an other htc wm device because they all use the same files for the splash screen or is that wrong?
It wouldn´t brick your device because its only a picture and not a bad rom or a wrong radio...
here are the tools for the rhodium splash...
Just wanted to say thanks for the quick reply and the tools.
Much appreciated
jdmsleepr said:
here are the tools for the rhodium splash...
Click to expand...
Click to collapse
Could this be used for Rhodium CDMA version such as Sprint (Rhodium 400) & Verizon? Does it use the same file and command? Thx
jdmsleepr said:
here are the tools for the rhodium splash...
Click to expand...
Click to collapse
The NBHUtil loaded and when I say build it acts like it does (reports Done!) but no file is created, no errors. Any ideas? Running on Windows 7.
Anyone want to make this for the polaris as it would be very useful for cooks, and flashers. Also MTTY under 7 is less than can be desired.
Some info, http://forum.xda-developers.com/showthread.php?t=644781.
It says that you have to hex edit the RUU to get it to task 29 instead of 28 (i think)
So someone please take it!
chris10230 said:
Anyone want to make this for the polaris as it would be very useful for cooks, and flashers. Also MTTY under 7 is less than can be desired.
Some info, http://forum.xda-developers.com/showthread.php?t=644781.
It says that you have to hex edit the RUU to get it to task 29 instead of 28 (i think)
So someone please take it!
Click to expand...
Click to collapse
It shouldn't be that difficult!
RUU is done.
Just give me a dummy .nbh file and I will make a single exe ROM wiper for you
yep saw that, was trying to get the one off of the LEO thread, will have a go this evening, will PM you when I've got it. Didnt want to run, you could always extract it yourself i think... http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19 if you get the time before i send it.
Cheers, once again for this.
I received a PM from chris10230 with a dummy .nbh file but replying here for others to be able to comment.
As I have understood a dummy .nbh file comes from the Leo (HD2). I am not too good in technical aspects of .nbh files so I have a doubt: as the dummy file is about 5 megabytes it still flashes something to the device. If this something is flashed into the ROM area - no problem, as it will be erased straight after flashing. But if it flashes something beyond the ROM area and this something is Leo-specific, is it safe to flash it?
Maybe some pro's can provide more information on this. As soon as I will be sure that this file is safe for our device I'll make a ROM wiper.
leppa said:
I received a PM from chris10230 with a dummy .nbh file but replying here for others to be able to comment.
As I have understood a dummy .nbh file comes from the Leo (HD2). I am not too good in technical aspects of .nbh files so I have a doubt: as the dummy file is about 5 megabytes it still flashes something to the device. If this something is flashed into the ROM area - no problem, as it will be erased straight after flashing. But if it flashes something beyond the ROM area and this something is Leo-specific, is it safe to flash it?
Maybe some pro's can provide more information on this. As soon as I will be sure that this file is safe for our device I'll make a ROM wiper.
Click to expand...
Click to collapse
Yeh very good point don't use it! Maybe you could ask a cook to create a blank nbh?
long days, not thinking straight. Good thing that someone else is looking at this apart from me
chris10230 said:
Yeh very good point don't use it!
Click to expand...
Click to collapse
Maybe it is still usable. We just need someone to be able to tell where it writes to
By the way, a boot/splash screen shouldn't be too big. I think I can create an .nbh with the default (smart mobility) screen to be flashed. There was a tool for it somewhere in this forums. Just need some free time to find it and make an .nbh...
Or maybe someone already has an .nbh with it?
try this for making splash screens .nbh http://forum.xda-developers.com/showthread.php?t=334907
Splash
Original "Smart Mobility" splash, tested.
I think may use it as dummy nbh, because it be written to phone < 1sec.
I run MTTY for " task 29 " and i trie leppa RUU with task 29 and all was ok...
But i got one problem, after task 29 i trie to flash last ROM of Kostas244 and also last ROM of Pcarvalho and the phone don't boot... But also trie the ROM of cruiserrr (naked version) and the phone did boot up...
I run task 29 before flash each of 3 ROM's... there some trick I missed?
For i can boot the phone with the new Kostas244 ROM i had to flash first Original ROM from HTC and then flash Kostas244... was the only way...
Some advice?
flash after task 29 from bootloader screen
sbettencourt said:
I run MTTY for " task 29 " and i trie leppa RUU with task 29 and all was ok...
But i got one problem, after task 29 i trie to flash last ROM of Kostas244 and also last ROM of Pcarvalho and the phone don't boot... But also trie the ROM of cruiserrr (naked version) and the phone did boot up...
I run task 29 before flash each of 3 ROM's... there some trick I missed?
For i can boot the phone with the new Kostas244 ROM i had to flash first Original ROM from HTC and then flash Kostas244... was the only way...
Some advice?
Click to expand...
Click to collapse
As Task 29 wipes out all from the phone it will be too thumb to boot, so you have to put polaris to bootloader mode (hold cam & power button while resetting to see tri-color boot screen) before you can flash as I understood in the above threads - unfortunately untested. this thread was few hours late. Please report
@ leppa good thing to start this thread. I tried on my own rigth after last pcar release. Maybe it is also a good move to provide the appropriate radio with this task 29 RUU. Could save the cooks a lot of maintenance posts.
So the final procedure would look like this
1. flash Task 29 RUU with appropriate radio (up to cooks recommendation)
2. Hard Reset
3. flash new ROM
in general a very usable thing to make things easier thanks
sqeeza said:
As Task 29 wipes out all from the phone it will be too thumb to boot, so you have to put polaris to bootloader mode (hold cam & power button while resetting to see tri-color boot screen) before you can flash as I understood in the above threads - unfortunately untested. this thread was few hours late. Please report
Click to expand...
Click to collapse
Thank's for the answer sqeeza, but you didn't tell anything new What i say is with the ROM from cruiserrr, the phone boot up ok... But with kostas244 and Pcarvalho ROM's the phone didn't boot... and yes of course i put first in bootloader mode and then flashed the ROM's...
I don't know why the ROM from cruiserrr boot ok and the others didn't...
Edit:
My phone don't boot anymore the kostas244 ROM... at least the last one... sh*t... Can anyone tell me why?
sbettencourt said:
Thank's for the answer sqeeza, but you didn't tell anything new What i say is with the ROM from cruiserrr, the phone boot up ok... But with kostas244 and Pcarvalho ROM's the phone didn't boot... and yes of course i put first in bootloader mode and then flashed the ROM's...
I don't know why the ROM from cruiserrr boot ok and the others didn't...
Click to expand...
Click to collapse
Sorry sbettencourt, this is then beyond my horizon.
Did not read attentively enough. I would have had an explaination for the original HTC ROM since they usually write all parts of the ROM (radio, sys, etc. ) at once. So I assume task 29 wipes something that cruiserr writes with his ROM while the other cooks don't. So it would be up to one cook to understand/ answer this part. Maybe cruiserr can help here.
Thank you for reporting
No problem sqeeza is good to have some answers... maybe someone can tell how to resolve this... the previous version of Kostas244 the phone booted but i download the new one and erase the previous... big mistake... i couldn't guess this too...
at least the Original ROM boot's fine not a cool ROM but work's... i already miss wm6.5
_____________Edit:
already flash again the cruiserrr ROM and the phone booted normal... it's strange...at least for me... the only difference i can see and i don't know if this matter, is, with the Cruiser ROM the splashcreen changes like with Original ROM, but with Kostas244 and Pcarvalho ROM's the splashscreen don't change... Can this make the difference?????
Ok... and now, my POLARIS is dead... No lights no nothing.
sorry to hear that, you say in your signature, dead by task 2a... That is mentioned many times that it will brick a polaris. Still sorry that you got caught by it.
sbettencourt said:
Thank's for the answer sqeeza, but you didn't tell anything new What i say is with the ROM from cruiserrr, the phone boot up ok... But with kostas244 and Pcarvalho ROM's the phone didn't boot... and yes of course i put first in bootloader mode and then flashed the ROM's...
I don't know why the ROM from cruiserrr boot ok and the others didn't...
Edit:
My phone don't boot anymore the kostas244 ROM... at least the last one... sh*t... Can anyone tell me why?
Click to expand...
Click to collapse
probably cause the rom only has the OS, its missing radio and splash...but this is just me guessing dont know what cruiserrr has...mine only has OS part so people can choose their own radio/splash...thats why i advice people to flash original 1st...takes longer and all but is flawless...be very careful with task commands...
hope you can revive your device
cheers
Yep...but never notice that HardSPL + Task 2a could wipe everything... Now i can´t forget that...loool... Was wrong but a god lesson!!!
Now my P3650 goes like a trojan to HTC for repair... lets see... maybe in 1 month i have him back and fine
At least, maybe my case can alert again who dangerous can be doing Task 2a...
sbettencourt said:
Yep...but never notice that HardSPL + Task 2a could wipe everything... Now i can´t forget that...loool... Was wrong but a god lesson!!!
Now my P3650 goes like a trojan to HTC for repair... lets see... maybe in 1 month i have him back and fine
At least, maybe my case can alert again who dangerous can be doing Task 2a...
Click to expand...
Click to collapse
As I have understood task 2a wipes ALL phone memory, including Splash, Radio and even Bootloader?
meknb said:
try this for making splash screens .nbh http://forum.xda-developers.com/showthread.php?t=334907
Click to expand...
Click to collapse
DmK75 said:
Original "Smart Mobility" splash, tested.
I think may use it as dummy nbh, because it be written to phone < 1sec.
Click to expand...
Click to collapse
Thanks for the links, guys.
Unfortunately, I've had electricity off several times yesterday and no Internet access. As I work from home, I have a lot of work to do now. Will make a wiper closer to the end of this week, I think.
Whenever leppa
Also yeh i think it does litterally wipe EVERYTHING off the phone... Still sorry that it happened to you sbettencourt, feel for you and a the phone (R.I.P. till repair that is )...