I have tried multiple times to connect to the evo shift in QPST, but i cant get it to work. Has anybody gotten QPST to work with the evo shift, and if so, how?
If all you want to do is setup QSPT, you can use THIS video.
That works for the EVO 3d (I own one, and have changed values with it before). I just keep getting some "connection failed" message with the Shift?
My EVO Has A V8. Does Yours?
Update your PRL and Profile, then reboot. What Rom are you running?
Related
Whats going on guys? I got the TP 2 days ago and have it completely unlocked. I am running the Elite RC2 ROM and absolutely love it so far.
My issue is now that when my phone goes to receive a MMS the "Download Envelope" pops up on top and then goes away after about 2 seconds and the phone disconnects from Edge leaving it not downloaded.
Then when I go to the MMS to download it again the "Download" button at the bottom is all grayed out so I cant push it again.
I have gotten a few pictures yesterday and the problem just started today.
Also when the pictures come through they are super tiny! Is there a mod to fix this? I think I remember on my TILT there was and it was great.
When I go to send MMS Pictures it does not allow me to send them coming up with "Message delivery failed"
Maybe My MMS Settings arent set up right? I dont know.
I dont know why it allows them sometime and sometime it wont but I have never been able to send one for some reason.
Any help would be great.
MMS Tiny Pictures on my Fuze on T-Mobile
I had the worst time with my 8525 Hermes... the pictures were tiny when I would receive an MMS. I finally found a couple of cabs on here to fix it. Now I have an AT&T Fuze that I've unlocked and I'm running jmckeejr's Chrome and I'm having the same problem... tiny pics coming through on my MMS. What gives??? Can anyone fix this or is there a cab out there to fix it?
I flashed the EliteRC4 and my MMS is working properly. I'm not sure what the difference is in the Chrome ROM and EliteRC4 ROM, but MMS works properly for me on T-Mobile now.
It seems like every other rom I flash I somehow breaks my MMS. My older build of EnergyROM did it perfectly. The newest one? Not at all. I had to fiddle around to get it working on Elite RC3 and I have no idea where to do that in 6.5.
Fix for small MMS pictures on T-Mobile
The fix for tiny MMS pictures...just install the attached cab.
jcrojas said:
The fix for tiny MMS pictures...just install the attached cab.
Click to expand...
Click to collapse
Will this work on the diamond also?
kwambewright said:
Will this work on the diamond also?
Click to expand...
Click to collapse
Sorry, I don't know if it will work on the diamond or not. I've only used it on the AT&T Fuze on T-Mobile and it works.
Unfortunately, this didn't work on my AT&T Fuze on the AT&T network.
I remember hearing that each carrier had different types (brands?) of MMS gateways, so maybe that has something to do with it.
is there a way for this to work on a samsung propel pro on tmobile?
thanks,
Rage10
question
jcrojas said:
The fix for tiny MMS pictures...just install the attached cab.
Click to expand...
Click to collapse
will this work on touch pro 2
thanks uploader for this, i just uploaded the .cab file and it works! i own a fuze on a tmobile network.
Sorry to bug you but I just got the unlocked htc touch pro 2 and not quite sure how to use it yet. How do I install this? Do I DL on my computer then drag it over to my phone? and if so where do I put install it or put it in?
oxsecretivexo said:
Sorry to bug you but I just got the unlocked htc touch pro 2 and not quite sure how to use it yet. How do I install this? Do I DL on my computer then drag it over to my phone? and if so where do I put install it or put it in?
Click to expand...
Click to collapse
like any .cab install, download to pc, active sync phone with pc, and transfer to phone using active sync or windows explorer, remember where you copied the .cab on device, and look on device with file explorer or or total commander and click on the .cab, and follow install.
Does not work with my phone
I am using the 6.5 EURO ROM
Should i ReFlash the rom and reinstall the cab?
soft reset
did you soft reset afterwards? Some settings dont take effect until a soft reset.
Will this work for an xperia x1 running wm6.5.3 on tmobile? I too suffer from tiny mms pictures when receiving yet am able to send them fine. I'm afraid to install and screw up the mms settings I already have...
(Sorryy for my bad english!!)I have two kinds of issues
1.
I have a Htc Touch Hd, i try to install Android.
I used this guide http://forum.xda-developers.com/showthread.php?t=959831
but after i open Haret, in the end there is:
"A N D R O I D: bin/sh can't access, tty job control turned off"
After this i can't do nothing.
2.
I try to install FROYO 2.2.1 CBV2, with partition.
I run install, than Haret.. here after some min repeat this:
"info: task rpcrouter: 15 blocked for more than 120 seconds."
and i can't do nothing again.
what i can do?
NFX-Shift STOCK Version 2.0 Issue
Though I do not have the answer to your question, I do have one of my own:
I have been running this ROM for a long time, since it came out basically. I have put it on 4 different Shifts and everything runs fine, until now.
I can't get voicemail anymore on 1 of the phone (most recent one I rooted). It tells me via text message I have one, and to listen to it. But the Spring Voicemail says it is empty.
I have tried reflashing it, and same thing. Any one have any ideas?
I love this ROM and would really hate to leave it over voicemails!
JellyThunder Rom
Hi there. I tried the JellyThunder rom, for the at&t Galaxy Note 2, obviously. But I ran into an issue. My S-Note doesnt app doesnt work. Any ideas ?
Trying to Flash HTC EVO3d to Cricket. Usuing CDMA Worksop2.7. When i choose com port 15 (As advised) and connect. says connected successfully. But when i got to Security Tab and hit read for SPC#, Says at the bottom of screen "Phone Does Not Answer" What am I Doing Wrong?
I have the same problem
Everytime I plug the Shift into the computer everything works fine with programs like QPST and CDMA WS but when I try to connect to QXDM it resets the phone, any ideas?
*EDIT*
Nevermind, Bebbitt figured it out already!
Well what did you do to fix it? I have the same problem.
If I remember right, you need to turn off "core dump memory" or something like that and keep it from starting up on its own when you start QXDM. Did this problem start when you put in a address after scanning memory? I found a list of addresses for the Shift on here and one of the addresses I put in started this whole problem. All the credit goes to Bebbitt for fixing it though, we were stumped until he came up with the solution.
Hope this helps!
Ive used a few ROMs for HTC Trophy and have found that some ROMs, the Field Test doesnt work. Ive tried a few codes that I knew of, and the only thing you get is Field Test Loading ....
The chef of the ROM isnt sure why it doesnt work. Can anyone else shed light on this? What would be the reason it doesnt work, any possible fixes?
Jola66 said:
Ive used a few ROMs for HTC Trophy and have found that some ROMs, the Field Test doesnt work. Ive tried a few codes that I knew of, and the only thing you get is Field Test Loading ....
sianto1997 and I fired a few private messages back in forth, hopefully we'll get sianto1997's SparkW rom to the level of XevRev in the programming department very soon!
The chef of the ROM isnt sure why it doesnt work. Can anyone else shed light on this? What would be the reason it doesnt work, any possible fixes?
Click to expand...
Click to collapse
Well, I was doing some digging on this today.. by accident.. while I waited for my frank-n-spark-w to finish an update test. I noticed my frank-n-spark-w had a newer PRL, so I tired to update it on my primary phone running myXevRev beta 1a... no go. I cannot get my PRL to update?!
I talked to ultrashot before the release of my rom (because I didn't see the point if I couldn't at least get the phone to program, which wasn't possible previously), and he told me to update the Xap Deployer package found in Dynamics7 to the newest version [v1.1-upd1]. Sure enough, after that, the phone appears to program.. but it can fail if done too quickly after first boot.
I know Servicetools.xap from the PMENU package is installing correctly now beyond a reasonable doubt (otherwise ##PST# wouldn't work in my rom), but I can't be sure EmbeddedTool.xap is installing correctly. I think that package had to do with the actual modification of the radio data for the CDMA Trophy during *228 programming.
I've got a GoldC (HTC Pro 7 or Arrive for Sprint users) from US Cellular on the way, so I'll be diving into that phone soon enough. I want to know if US Cellular and Sprint users have had similar programming issues with their phones and unlocked roms.. but haven't really had time to look up the info or go ask them. XD Sprint phones program using a different process then Verizon, plus Sprint can usually push PRL updates out whenever they want to users. US Cellular.. I dunno how they work vs Sprint.
After today though, I'm sure that even with some of the issue worked out, but other parts remain to be fixed. I swore that on a stock SparkW, that the phone would automatically put itself into airplane mode for a second after programing, but it doesn't appear to do that using my XevRev rom, but you can still program the phone even after a full factory reset (which isn't possible using DFT or older Dynamics7 for full unlock with SparkW).
Ultrashot may have some more ideas, but I'll test to confirm which part is still broken. I still have yet to try unsigning the xap in question and seeing if it will install then. The default xaps in that package are signed just like Market Place xap files, even though you can't download them as Market Place apps. ^^; I'm still working on getting my kitchen back up and running after my desktop died, so I'll be exploring this issue again soon.
TheXev said:
Well, I was doing some digging on this today.. by accident.. while I waited for my frank-n-spark-w to finish an update test. I noticed my frank-n-spark-w had a newer PRL, so I tired to update it on my primary phone running myXevRev beta 1a... no go. I cannot get my PRL to update?!
I talked to ultrashot before the release of my rom (because I didn't see the point if I couldn't at least get the phone to program, which wasn't possible previously), and he told me to update the Xap Deployer package found in Dynamics7 to the newest version [v1.1-upd1]. Sure enough, after that, the phone appears to program.. but it can fail if done too quickly after first boot.
I know Servicetools.xap from the PMENU package is installing correctly now beyond a reasonable doubt (otherwise ##PST# wouldn't work in my rom), but I can't be sure EmbeddedTool.xap is installing correctly. I think that package had to do with the actual modification of the radio data for the CDMA Trophy during *228 programming.
I've got a GoldC (HTC Pro 7 or Arrive for Sprint users) from US Cellular on the way, so I'll be diving into that phone soon enough. I want to know if US Cellular and Sprint users have had similar programming issues with their phones and unlocked roms.. but haven't really had time to look up the info or go ask them. XD Sprint phones program using a different process then Verizon, plus Sprint can usually push PRL updates out whenever they want to users. US Cellular.. I dunno how they work vs Sprint.
After today though, I'm sure that even with some of the issue worked out, but other parts remain to be fixed. I swore that on a stock SparkW, that the phone would automatically put itself into airplane mode for a second after programing, but it doesn't appear to do that using my XevRev rom, but you can still program the phone even after a full factory reset (which isn't possible using DFT or older Dynamics7 for full unlock with SparkW).
Ultrashot may have some more ideas, but I'll test to confirm which part is still broken. I still have yet to try unsigning the xap in question and seeing if it will install then. The default xaps in that package are signed just like Market Place xap files, even though you can't download them as Market Place apps. ^^; I'm still working on getting my kitchen back up and running after my desktop died, so I'll be exploring this issue again soon.
Click to expand...
Click to collapse
No problem anymore! I (am the chef, and I) fixed it in v1.5.4! (http://forum.xda-developers.com/showthread.php?t=1909006)
(an for the HTC Arrive, I made that rom already! (http://forum.xda-developers.com/showthread.php?t=1900007))
My ROMs are all now smooth and just working. Thank you very much!
sianto1997 said:
No problem anymore! I (am the chef, and I) fixed it in v1.5.4! (http://forum.xda-developers.com/showthread.php?t=1909006)
(an for the HTC Arrive, I made that rom already! (http://forum.xda-developers.com/showthread.php?t=1900007))
My ROMs are all now smooth and just working. Thank you very much!
Click to expand...
Click to collapse
Okay, EmbeddedTool was working in my rom, you need to dial ##634# to access it. Still, there is something funky with programing okay on.. I'm going to make a video so I can demonstrate it.