Database Info

How to know if your magic is truly bricked or only semi bricked.

I've had the great misfortune of bricking my phone within the first few hours of owning it. I should have known something was up, it wouldn't reboot when I changed the language to English, and I'd have to hard reset it (delete everything) and then let it load in Chinese again. Well, in an attempt to fix what I thought was a rom issue, I went through the song and dance of trying to root my phone.
I'm still not fully clear on how to do it, as it seems there's more to it than just what the tutorials say.
Anyway, like the title of this thread says, there's a pretty good way to figure out if your phone is really bricked, no need to ask or wonder anymore.
If your phone only boots to the htc magic screen (and then stops), and is unable to load bootloader, fastboot, usb connections, or anything else, it's bricked. 100%. You have to take it back. Don't bother searching the forums for the answer, I've wasted hours going through every related thread and trying every possible solution. Without the ability to access the fastboot screen, you're out of possibilities. Untill someone comes out with an unbricker which goes deeper than fastboot, there is absolutely no way to fix it.
A semi brick is much better on the other hand. There are plenty of ways to fix your phone, provided you're only semi bricked. I would define semi bricked as being able to enter fastboot, but being unable to boot the phone as normal. This can happen with a bad flash, or a mis step during a tutorial. I'm not exactly sure how easy it is to change a semi brick to a full brick, but my full bricking happened after semi bricking it while loading a new rom on it.
So. to summarize, if your phone WON'T go into the boot menu by pressing vol-down+power, you're in need of a new phone.
If you can still get into the boot menu, and access your phone through usb, you're ok, just get help (via a tutorial) before going any further, unless you're completely certain of what to do next.
Tis a shame to send a device, which is physically undamaged, to the digital graveyard. But such is life.
Caid.
444.
EDIT
on a side note, before my phone reset itself into it's endless loop of unloading, I noticed the screen flash an image of a box with what looked like a red arrow coming out of it. It was right in the center of the screen. This was in the recovery-RAv1.0H.img menu. What's that all about?

Did you try other key combinations such as Home+Power, or Back+Power?

I'm sorry but I think you're misunderstanding it all a little bit...
Caid444 said:
I've had the great misfortune of bricking my phone within the first few hours of owning it. I should have known something was up, it wouldn't reboot when I changed the language to English, and I'd have to hard reset it (delete everything) and then let it load in Chinese again. Well, in an attempt to fix what I thought was a rom issue, I went through the song and dance of trying to root my phone.
I'm still not fully clear on how to do it, as it seems there's more to it than just what the tutorials say.
Anyway, like the title of this thread says, there's a pretty good way to figure out if your phone is really bricked, no need to ask or wonder anymore.
Click to expand...
Click to collapse
It's easy if you follow the guides... I did it in two different phones with no problem at all in any of them... Anyway, let's stay on topìc
Caid444 said:
If your phone only boots to the htc magic screen (and then stops), and is unable to load bootloader, fastboot, usb connections, or anything else, it's bricked. 100%. You have to take it back. Don't bother searching the forums for the answer, I've wasted hours going through every related thread and trying every possible solution. Without the ability to access the fastboot screen, you're out of possibilities. Untill someone comes out with an unbricker which goes deeper than fastboot, there is absolutely no way to fix it.
Click to expand...
Click to collapse
Wrong. If your phone boots to the HTC Magic screen, the bootloader is doing it's job. The bootloader just takes you there. The linux kernel and ramdisk takes you to the boot animation, and there is where android really starts.
If your phone shows the first htc logo, or the Vodafone branded screen, you can start in bootloader mode. To make that you just have to remove the battery, put it back, and press and hold BACK + END KEY. From that, you can fastboot.
Also, and unless you destroyed the recovery partition, you can also boot in recovery mode, by pressing END KEY while holding HOME (no need to keep them both hold, just home button)
Caid444 said:
A semi brick is much better on the other hand. There are plenty of ways to fix your phone, provided you're only semi bricked. I would define semi bricked as being able to enter fastboot, but being unable to boot the phone as normal. This can happen with a bad flash, or a mis step during a tutorial. I'm not exactly sure how easy it is to change a semi brick to a full brick, but my full bricking happened after semi bricking it while loading a new rom on it.
Click to expand...
Click to collapse
I would call a semi brick this:
Your phone goes into an endless loop while booting.
Your phone gets stucked on the first boot logo.
You can't get access to the recovery partition.
Your phone boots all the way but then gets stucked.
Your phone gone bad during a software update.
That, all, can be solved by reflashing the affected region. There are tutorials for everything but if you need I can write some hints on each case (I suffered them all ).
Caid444 said:
So. to summarize, if your phone WON'T go into the boot menu by pressing vol-down+power, you're in need of a new phone.
Click to expand...
Click to collapse
Actually, VOLDOWN+POWER starts in Hboot mode. From there you can go back to fastboot mode, but hboot is used to make a software upgrade using complete images or running htc diagnostic images (SAPPDIAG.IMG, SAPP*.IMG /NBH).
Caid444 said:
If you can still get into the boot menu, and access your phone through usb, you're ok, just get help (via a tutorial) before going any further, unless you're completely certain of what to do next.
Tis a shame to send a device, which is physically undamaged, to the digital graveyard. But such is life.
Click to expand...
Click to collapse
If you can't get USB working on fastboot mode, or on recovery mode, your phone has probably a hardware fault. It happened with some of the first revisions of the Vodafone branded magic, don't know about htc branded ones though..
NOTE: Not talking about missing drivers, if you don't have drivers, that's another problem, but the computer should at least detect the device. Also, if your phone is off, and you connect the charger (or usb) and the orange led lights up, the bootloader should be ok.
Caid444 said:
on a side note, before my phone reset itself into it's endless loop of unloading, I noticed the screen flash an image of a box with what looked like a red arrow coming out of it. It was right in the center of the screen. This was in the recovery-RAv1.0H.img menu. What's that all about?
Click to expand...
Click to collapse
That's the recovery mode. With that you can unbrick your phone
Also, as another hint, if you're new to linux OSes, you might want to take a look at some manual on terminal commands. If your main software is bricked, it's possible that your SDCard doesn't get mounted on recovery mode, depending on wich recovery image you're running. Provided you have an update.zip on the sdcard you need to run, you might have to mount it manually.
To do that, you have to start the phone in recovery mode, and run an "adb shell" on the PC.
When you have a shell opened, you'll have to mount the sdcard manually:
mount /dev/block/mmcblk0p1 /sdcard
Then, on the phone you can use the option to run sdcard update.zip to restart the software upgrade procedure.
Regards!

Before I reply, I'd just like to say thank you very much for your extremely in depth reply.
biktor_gj said:
I'm sorry but I think you're misunderstanding it all a little bit...
It's easy if you follow the guides... I did it in two different phones with no problem at all in any of them... Anyway, let's stay on topìc
Wrong. If your phone boots to the HTC Magic screen, the bootloader is doing it's job. The bootloader just takes you there. The linux kernel and ramdisk takes you to the boot animation, and there is where android really starts.
If your phone shows the first htc logo, or the Vodafone branded screen, you can start in bootloader mode. To make that you just have to remove the battery, put it back, and press and hold BACK + END KEY. From that, you can fastboot.
Also, and unless you destroyed the recovery partition, you can also boot in recovery mode, by pressing END KEY while holding HOME (no need to keep them both hold, just home button)
I would call a semi brick this:
Your phone goes into an endless loop while booting.
Your phone gets stucked on the first boot logo.
You can't get access to the recovery partition.
Your phone boots all the way but then gets stucked.
Your phone gone bad during a software update.
That, all, can be solved by reflashing the affected region. There are tutorials for everything but if you need I can write some hints on each case (I suffered them all ).
Actually, VOLDOWN+POWER starts in Hboot mode. From there you can go back to fastboot mode, but hboot is used to make a software upgrade using complete images or running htc diagnostic images (SAPPDIAG.IMG, SAPP*.IMG /NBH).
If you can't get USB working on fastboot mode, or on recovery mode, your phone has probably a hardware fault. It happened with some of the first revisions of the Vodafone branded magic, don't know about htc branded ones though..
NOTE: Not talking about missing drivers, if you don't have drivers, that's another problem, but the computer should at least detect the device. Also, if your phone is off, and you connect the charger (or usb) and the orange led lights up, the bootloader should be ok.
That's the recovery mode. With that you can unbrick your phone
Also, as another hint, if you're new to linux OSes, you might want to take a look at some manual on terminal commands. If your main software is bricked, it's possible that your SDCard doesn't get mounted on recovery mode, depending on wich recovery image you're running. Provided you have an update.zip on the sdcard you need to run, you might have to mount it manually.
To do that, you have to start the phone in recovery mode, and run an "adb shell" on the PC.
When you have a shell opened, you'll have to mount the sdcard manually:
mount /dev/block/mmcblk0p1 /sdcard
Then, on the phone you can use the option to run sdcard update.zip to restart the software upgrade procedure.
Regards!
Click to expand...
Click to collapse
To the first answer.
It's not THAT easy, the guides are kinda (you should already know what you're doing at this point) in nature. It's confusing for newcomers, as we've no idea what to expect, that and there are a multitude of variations. More specification as to which guide works with which model, and which updates would be nice.
As for the second part, I could not get the phone working with any button variation pressed. I'm sorry I was not more clear in my description, to begin with. I could press (and hold) any button (or buttons) + power (end key) and the phone would just vibrate (briefly) and then display the original screen "htc magic"(endlessly). The orange light does come on when plugged into the usb or computer, but only while it is off, as soon as the device turns on, the light turns off.
Another thing of note is that, after bricking it, I had to remove the battery to turn it off (every time if it was on), and if I put the battery back in while it's plugged into the usb port of the computer, the phone would turn back on without pressing any buttons. It's also completely unresponsive or detectable by my computer after bricking it. The only other thing I can get it to do is make the orange light blue by holding the action button and turning on the device. That way the light on top of the device is blue when it turns on. Still unresponsive at that point.
This is my first android device, but not my first htc device (I've had MANY MANY different ones.) so I'm a bit familiar with trying different combinations to get a response.
I am not the first person who's had this happen, unfortunately. There have been a couple others, who've described the exact same encounter. Perhaps it's a mistake that I made, and perhaps they also made it themselves. I would like to figure out how it's happening, though, and perhaps write a tutorial for people like us unlucky few.
Again, a really big thanks. I've sent my phone back and am getting a new one soon. I much appreciate your reply, however, as it's probably the most understanding and considerate reply I've seen on these forums.
Cheers.
Caid.
444

One more quick question out of curiosity, when you press and hold back and press end to turn on the device (it still goes to the htc magic screen) SHOULD it go to a different screen, other than the "htc magic" screen? Or is that a process that runs without some sort of visual notification on the device itself?
The usb was completely unresponsive after this happened, but in the event that bootloader may have been running, (only possible if it runs without any visual notification on the device itself), I'll go pick up the device and see if my usb drivers on my computer just became unresponsive after being accessed too many times. Sometimes windows does that, right? Perhaps a reboot would have allowed fastboot and the drivers to connect again, if the device was trying to talk to the computer, but I just didn't know on account of not having any notification.
So, again, should pressing back and power bring me to a different screen? or would it also look like it was hanging on htc magic screen?
Caid.
444
p.s. Sorry for the confusing wording, I'm tired and trying very hard to be as specific as possible.

back+end/power should lead you to the fastboot screen right after it shows the HTC Magic screen or whatever splash screen you have installed.
Home+end/power should lead you to the recovery screen.

ok, it was bricked. Thanks for the answer.
Caid.
444

Caid444 said:
Before I reply, I'd just like to say thank you very much for your extremely in depth reply.
To the first answer.
It's not THAT easy, the guides are kinda (you should already know what you're doing at this point) in nature. It's confusing for newcomers, as we've no idea what to expect, that and there are a multitude of variations. More specification as to which guide works with which model, and which updates would be nice.
Click to expand...
Click to collapse
No problem, we all should be here to learn, and to help (except for the trolls)
This is the guide I followed for both Vodafone branded Magics: http://android-dls.com/wiki/index.php?title=Magic_Rooting
Maybe not for now, but for the next magic you get it may come handy
Caid444 said:
As for the second part, I could not get the phone working with any button variation pressed. I'm sorry I was not more clear in my description, to begin with. I could press (and hold) any button (or buttons) + power (end key) and the phone would just vibrate (briefly) and then display the original screen "htc magic"(endlessly). The orange light does come on when plugged into the usb or computer, but only while it is off, as soon as the device turns on, the light turns off.
Click to expand...
Click to collapse
When the phone is off with the charger connected and you press the power button, the light goes off, as for the others, you really should be able to enter the SPL if it could the magic bootlogo and vibrated upon boot...
Maybe you didn't try enough or maybe your bootloader behaved differently than mine... I should be more clear anyway, to get to the bootloader, the best way to make it go to the bootloader is press and hold back key, then while holding it, hold the power button too. It should take about a second or two before showing the three skater droids.
Caid444 said:
Another thing of note is that, after bricking it, I had to remove the battery to turn it off (every time if it was on), and if I put the battery back in while it's plugged into the usb port of the computer, the phone would turn back on without pressing any buttons. It's also completely unresponsive or detectable by my computer after bricking it. The only other thing I can get it to do is make the orange light blue by holding the action button and turning on the device. That way the light on top of the device is blue when it turns on. Still unresponsive at that point.
Click to expand...
Click to collapse
When you put the battery while USB or charger is connected, the phone boots up, that's the normal behaviour. About the blue led, that's the Radio bootloader. That's quite dangerous to play with, but it gives a lot of other functions. Another sign that your phone wasn't completely dead Even if you wipe the SPL (the three skater droids), you may be able to boot into the Radio bootloader and write or boot another one to fix it. But that's waaaay harder
Caid444 said:
This is my first android device, but not my first htc device (I've had MANY MANY different ones.) so I'm a bit familiar with trying different combinations to get a response.
I am not the first person who's had this happen, unfortunately. There have been a couple others, who've described the exact same encounter. Perhaps it's a mistake that I made, and perhaps they also made it themselves. I would like to figure out how it's happening, though, and perhaps write a tutorial for people like us unlucky few.
Click to expand...
Click to collapse
I guess the first advice when you start tricking with a phone is be careful with what you're doing. That's the good thing of fastboot.
When booting on fastboot mode, you can pick, for example a recovery image, and boot it without overwriting the original rom:
Code:
fastboot boot [recovery_image]
Then, when you see it's working, you can flash it:
Code:
fastboot flash recovery [recovery_image]
fastboot flash boot [boot_image]
fastboot flash system [system_image]
fastboot flash data [data_image]
You can't do that with the system.img since it's too big, but you can do it also with a boot.img
About the key combinations on the phone, it goes like this:
Code:
BACK + END KEY -> Fastboot mode (you shouldn't see the boot logo)
VOLDOWN + END KEY -> Hboot mode (you shouldn't see the boot logo)
ACTION (trackball center) + END KEY -> Radio Bootloader (you shouldn't see the boot logo)
HOME + END KEY -> Recovery mode (you should see the boot logo, then get the recovery menu)
SEND + MENU + END -> Reboot the phone (while the phone is on)
Maybe there are more (android has kind of 'safe mode' but I don't know it it goes there automatically if there's a problem or if it has to be called manually)
Anyway, I hope these things will be useful for the next phone, and for anybody who's a bit lost on this
Regards!

Let us know where you live , so maybe one can help you , I live in Sweden and will be glad to help you if you are near ;-)

Hey! Thanks again for all the help, and the offer to come help. Unfortunately, I'm in China. Coming here from Sweden (although it's a single large landmass) would take quite a bit of time
I appreciate all the support, though. Very cool community we're building here for the magic.
Caid.
444

htc semi-brick?
Hi to all. I'm in the same condition described in this tread; after installing SPL i get the htc block in Vodafone brand red screen.
None keys combination bring me to the boot menù. Only Action(trackball) + power have effect, but with a black screen...
Any suggest?

What do you do if you can boot into fastboot but can't flash anything because absolutely everything gives the error "FAILED (remote: signature verify fail)"?
I have a card reader and have tried just about every sappimg.zip, every boot.img, every recovery.img i could find. I can't even boot a recovery img because the screen just hangs at the HTC Magic logo.
I don't know what kind of warranty i have on this thing, but i might take it in tomorrow and see if i can get it replaced. I've only had it for just under two weeks.

Newbie need help
ok so i can still go to recovery mode but everytime i reboot my phone the mytouch 3g logo never goes away im new to Android but not htc can somebody plz help me out.

gruppler said:
What do you do if you can boot into fastboot but can't flash anything because absolutely everything gives the error "FAILED (remote: signature verify fail)"?
I have a card reader and have tried just about every sappimg.zip, every boot.img, every recovery.img i could find. I can't even boot a recovery img because the screen just hangs at the HTC Magic logo.
I don't know what kind of warranty i have on this thing, but i might take it in tomorrow and see if i can get it replaced. I've only had it for just under two weeks.
Click to expand...
Click to collapse
Instead of flashing something, you boot a recovery image, and then, from there, you flash whatever you need (using adb & flash_image for example)
PS: Be a little patient, if fastboot is letting you boot a recovery image, the recovery needs to boot, and that takes a little while, and while it's booting, you see the bootlogo until the menu appears. Also, you can try running adb shell after boot process started to try to get an error message (or at least to know if the thing is booting in some way)

I couldn't boot any recovery images. I had tried a few different Hero ROMs but decided i wanted to use Cupcake again because i have a 32B board and it just doesn't have enough RAM, though Swapper makes it usable at least. I don't know what exactly i did, but i've learned a lot from my mistakes. Everything i tried failed the signature check because the hboot version didn't match. If i could just flash the 1.33.2005 hboot again, i would have been in business, but no matter which recovery image i tried, it just sat there doing nothing. And believe me, i waited.
Fortunately, T-Mobile gave me a new device after i took it in and played dumb. And I just rooted it =]

Caid444 said:
ok, it was bricked. Thanks for the answer.
Caid.
444
Click to expand...
Click to collapse
Why not flashing it with an RUU from HTC. Not sure that would work but it is worth trying.

Hi there, people!
First of all, thanks because while I was reading ur posts I realized that my phone had been bricked, 100 %
I tried official ROM upgrade to Android 1.6 using the folowing steps
1. Copied radio zip to my sd card by renaming it in update.zip
2. Recovery screen was started by pressing HOME+END key
3.Applied update.zip, process was going on: Opening package, verifing package, installing radio...and message about success was shown and phone restarted
4. Phone stucked on HTC Magic logo screen...15 minutes
5. I removed a battery, put it back and tried to reach recovery or boot mode again
6.Unsuccessfully! Phone vibrates and turns on...but always stucks on the HTC Magic screen
7. USB does not recognize my phone is connected (I tried any adb and fastboot commands)
8. So, I just pray to give me a new phone if my warranty will be accepted

iivanovic said:
Hi there, people!
First of all, thanks because while I was reading ur posts I realized that my phone had been bricked, 100 %
I tried official ROM upgrade to Android 1.6 using the folowing steps
1. Copied radio zip to my sd card by renaming it in update.zip
2. Recovery screen was started by pressing HOME+END key
3.Applied update.zip, process was going on: Opening package, verifing package, installing radio...and message about success was shown and phone restarted
4. Phone stucked on HTC Magic logo screen...15 minutes
5. I removed a battery, put it back and tried to reach recovery or boot mode again
6.Unsuccessfully! Phone vibrates and turns on...but always stucks on the HTC Magic screen
7. USB does not recognize my phone is connected (I tried any adb and fastboot commands)
8. So, I just pray to give me a new phone if my warranty will be accepted
Click to expand...
Click to collapse
I have the same problem. I get up hboot and fast boot menus can not get it in recovery. try to add in sappimg but no luck

I'm having the exact same problem...
Any solution yet?

Hello! I can assure you that your phone is not fully bricked! Awhile ago I flashed a new radio only to discover that I hadn't done my research and was a complete and total idiot. I flashed the 1.76.xxxx on a 32B. It didn't like it. I got a quick HTC logo that disappeared then the phone never responded again. When I say never responded it was dead. no combination of buttons would get any response. If you can get into fastboot you have options. All that's necessary is to make sure you have the appropriate sappimg file. Try the Unlockr's gold card method file. He has a .zip file that may work for you. Just make sure that you find an image that is compatible with your board (32A or 32B). Hope this helps!

Evo Shift Stuck In Boot Loop Please Help!

Hello,
I have an Evo Shift stuck in the boot loop. As soon as I put the battery in all it does is reset itself to the screen with the white background and green "HTC" logo, and will keep restarting until the battery dies.
If I hold volume down and turn it on, it does go into the bootloader, but picking ANYTHING, such as recovery or factory reset, does nothing but sending it back to the HTC screen.
I have tried flashing the RUU.exe (2.27.651.2) through Fastboot USB and it completed successfully, but it just restarts right back to the HTC screen. I have also put PG06img that I found on here on the root of my card, and it will never load it up.
Are there any other solutions anyone can think of? They would be much appreciated. I see a lot of these threads for regular Evos, but not for Shifts.
The only other thing I really know about the phone is that it is:
S-On
Hboot- 0.98.0001
Radio- 1.08.00.0506
Thank you so much for all of your help!

Seems to me you aren't rooted and that's more than likely your problem, boot into fastboot and use the ruu application for gingerbread.
Sent from my PG06100 using Tapatalk

Rooster85 said:
Seems to me you aren't rooted and that's more than likely your problem, boot into fastboot and use the ruu application for gingerbread.
Sent from my PG06100 using Tapatalk
Click to expand...
Click to collapse
While I am pretty sure I am not rooted, if you are talking about the early RUU release; 1.17.651.1, the application starts and then ends up failing in the beginning of the process. Is this what you are talking about? The drivers should be all good, the application starts to flash and then dies though. Thanks!

samcrac said:
While I am pretty sure I am not rooted, if you are talking about the early RUU release; 1.17.651.1, the application starts and then ends up failing in the beginning of the process. Is this what you are talking about? The drivers should be all good, the application starts to flash and then dies though. Thanks!
Click to expand...
Click to collapse
Use the new RUU. But make sure your SD card is formatted to a FAT32 partition. (Stock 2gig sd card and some other store boughts are not)
You can format on your computer and then place the RUU on the root of sd card again
(Bootloader won't recognize the ruu zip if not partitioned)
Sent from my Supreme Shift

notsointeresting said:
Use the new RUU. But make sure your SD card is formatted to a FAT32 partition. (Stock 2gig sd card and some other store boughts are not)
You can format on your computer and then place the RUU on the root of sd card again
(Bootloader won't recognize the ruu zip if not partitioned)
Click to expand...
Click to collapse
Ok, I just did this, everything updated fine and all completeted on the bootloader. It then said "press power to reboot." I did so, and went right back into the same boot loop. Any other ideas. I figured running this, and the RUU.exe on the computer were the sure fire ways to get this thing working again???

samcrac said:
Ok, I just did this, everything updated fine and all completeted on the bootloader. It then said "press power to reboot." I did so, and went right back into the same boot loop. Any other ideas. I figured running this, and the RUU.exe on the computer were the sure fire ways to get this thing working again???
Click to expand...
Click to collapse
So just a little information.
you said your not rooted?
So that means you have no ability to flash anything because you have no custom recovery and the bootloader isnt unlocked (S-on)
So what DID you do before it bootlooped? there had to have been something you were trying to do.
Not trying to blame anything on you at all just want to make sure we are helping the most accurate way possible

notsointeresting said:
So just a little information.
you said your not rooted?
So that means you have no ability to flash anything because you have no custom recovery and the bootloader isnt unlocked (S-on)
So what DID you do before it bootlooped? there had to have been something you were trying to do.
Not trying to blame anything on you at all just want to make sure we are helping the most accurate way possible
Click to expand...
Click to collapse
No I hear ya. I was sold the phone fairly cheap and was told "all you need to do is to reinstall the RUU, that is all that is wrong." Obviously I was skeptical, but when I checked everything out, everything looked good, and again, for the price, I knew it was a gamble. That being said, I'm sure something was tried in order to modify the phone and this is how it got like this.
I have soft bricked my old Evo 4g a handful of times and an RUU or Rom flash would always solve the problem.
Anyway, there is no custom recovery, and I'm pretty sure theres no root because it is still "S-ON," I am just trying to see if anyone here has any more info before it goes in for repair.
The only last thing I would guess you MIGHT be able to do is to install a custom recovery, but is there ANY way to do this by just being in the bootloader and using FASTBOOT USB? Any more help is greatly appreciated. Thanks!

samcrac said:
No I hear ya. I was sold the phone fairly cheap and was told "all you need to do is to reinstall the RUU, that is all that is wrong." Obviously I was skeptical, but when I checked everything out, everything looked good, and again, for the price, I knew it was a gamble. That being said, I'm sure something was tried in order to modify the phone and this is how it got like this.
I have soft bricked my old Evo 4g a handful of times and an RUU or Rom flash would always solve the problem.
Anyway, there is no custom recovery, and I'm pretty sure theres no root because it is still "S-ON," I am just trying to see if anyone here has any more info before it goes in for repair.
The only last thing I would guess you MIGHT be able to do is to install a custom recovery, but is there ANY way to do this by just being in the bootloader and using FASTBOOT USB? Any more help is greatly appreciated. Thanks!
Click to expand...
Click to collapse
It shouldn't have a custom recovery if it shows s-on.
I don't see why the RUU wouldn't work.
Honestly it doesn't sound like a softbrick- sounds like its just bricked (Which ive only heard of 1 Shift getting bricked completley)

notsointeresting said:
It shouldn't have a custom recovery if it shows s-on.
I don't see why the RUU wouldn't work.
Honestly it doesn't sound like a softbrick- sounds like its just bricked (Which ive only heard of 1 Shift getting bricked completley)
Click to expand...
Click to collapse
Make it 2! Thanks for your help though!!!

Also Stuck In A Bootloop
samcrac said:
Hello,
I have an Evo Shift stuck in the boot loop. As soon as I put the battery in all it does is reset itself to the screen with the white background and green "HTC" logo, and will keep restarting until the battery dies.
If I hold volume down and turn it on, it does go into the bootloader, but picking ANYTHING, such as recovery or factory reset, does nothing but sending it back to the HTC screen.
I have tried flashing the RUU.exe (2.27.651.2) through Fastboot USB and it completed successfully, but it just restarts right back to the HTC screen. I have also put PG06IMG that I found on here on the root of my card, and it will load it up (I'll see the blue loading bar and then the brown loading bar in the top right hand corner of the screen), but it then checks it again, and then goes back to the original screen for the bootloader.
Are there any other solutions anyone can think of? They would be much appreciated. I see a lot of these threads for regular Evos, but not for Shifts.
The only other thing I really know about the phone is that it is:
S-On
Hboot- 0.98.0001
Radio- 1.08.00.0506
Thank you so much for all of your help!
Click to expand...
Click to collapse
I'm trying to resolve a very similar problem as him, but I know of the history of my phone (since I'm the only owner), so hopefully an answer for me can assist him also.
The Story: One day, I'm playing Uno HD (downloaded from Android Market). I toss out a Draw 4, and then I see: "Google Infrastructure Failure" and a Triangle with an exclamation mark. I reset the phone, and it starts up fine. Then a few hours later, my phone randomly restarts itself into the bootloader screen after trying to reload the home screen (because the memory manager is overly aggressive).
I see no HTC Screen. It goes straight to the bootloader without any input. If I plug it to the charger from an off state, the amber light comes on, and 10 seconds later, bootloader screen. With a battery, it appears automatically after 45 seconds.
Fastboot can read my memory card just fine. It's already been re-formatted as FAT32 in my pitiful attempt to try to repair it. It's checked and read a PG06IMG file I placed on the SD Card's root, went through the entire process of reading it, but it doesn't ask me if I want to upgrade. It takes me back to the original screen. (Maybe I'm loading the wrong file).
Recovery and Factory Reset immediately restarts the bootloader after showing me the skateboarding android splash screen.
I've also tried to flash the newest stock RUU for it. (2.76.651.4), but after the RUU sends the command to start up in bootloader mode, the phone shuts off. Thus giving me the connection error.
(Maybe if someone could rewrite the .exe file to not send out the command to begin loading as if it was in the bootloader screen, it could work. I'd pay for that.)
Other Stuff:
ROM: Stock Sprint Gingerbread OTA ROM. I've been living the vanilla life. No root access. No funny stuff. Just a stock phone with apps (Third Blade, Uno HD, ASTRO File Manager, ect...)
Directly from bootloader screen:
SPEEDY XA SHIP S-ON
HBOOT-0.98.0001
RADIO-1.08.00.0506
eMMC-boot
April 11 2011, 22:32:34
Is there a way we can flash a file from the SD Card which will turn off the security and/or temp/perm root it? (forgive my noobness for such a question)
EDIT: I'm referring to a way that's outside of the adb push method. My device can't be found, and the device won't get past the bootloader screen, so that method doesn't help me too much. However, I do have the ADK Installed and the ADB Command Line works fine.

Ok .. HERE'S THE SOLUTION:
First off all if your S- ON it means you are NOT rooted
If you get stuck in a bootloop .. don't worry it can be fixed.
What you need to do is download PG06IMG.ZIP and place it on your sd card, you can access your sd card by going into recovery then mount section, then usb. This will allow you to move the file from your computer to the root of your sd card.
Once you do this be sure you back up any info you don't want to lose. Once you have the file in place, go back to fastboot ( hold vol down and power) it will read file and when it asks you to update press vol up. It will take a few minutes to update this will revert your phone back to stock but if you have an old recovery it will not do a full restore, it will only update the rom.
Once you get your phone back to working, I recommend updating your recovery by downloading Rom Manager and flashing the latest clockwork recovery. This problem happens usually due to an old recovery.
One other thing you can try if you do NOT want to reset your phone, you can try flashing a new kernal.
Sent from my PG06100 using Tapatalk

RUU won't work if your stuck in bootloop ..
Sent from my PG06100 using Tapatalk

If you want to root your phone use visionary to temp root then use shift rr .. you can then flash a custom recovery which is essential to avoid this from happening again
flylike2kites said:
I'm trying to resolve a very similar problem as him, but I know of the history of my phone (since I'm the only owner), so hopefully an answer for me can assist him also.
The Story: One day, I'm playing Uno HD (downloaded from Android Market). I toss out a Draw 4, and then I see: "Google Infrastructure Failure" and a Triangle with an exclamation mark. I reset the phone, and it starts up fine. Then a few hours later, my phone randomly restarts itself into the bootloader screen after trying to reload the home screen (because the memory manager is overly aggressive).
I see no HTC Screen. It goes straight to the bootloader without any input. If I plug it to the charger from an off state, the amber light comes on, and 10 seconds later, bootloader screen. With a battery, it appears automatically after 45 seconds.
Fastboot can read my memory card just fine. It's already been re-formatted as FAT32 in my pitiful attempt to try to repair it. It's checked and read a PG06IMG file I placed on the SD Card's root, went through the entire process of reading it, but it doesn't ask me if I want to upgrade. It takes me back to the original screen. (Maybe I'm loading the wrong file).
Recovery and Factory Reset immediately restarts the bootloader after showing me the skateboarding android splash screen.
I've also tried to flash the newest stock RUU for it. (2.76.651.4), but after the RUU sends the command to start up in bootloader mode, the phone shuts off. Thus giving me the connection error.
(Maybe if someone could rewrite the .exe file to not send out the command to begin loading as if it was in the bootloader screen, it could work. I'd pay for that.)
Other Stuff:
ROM: Stock Sprint Gingerbread OTA ROM. I've been living the vanilla life. No root access. No funny stuff. Just a stock phone with apps (Third Blade, Uno HD, ASTRO File Manager, ect...)
Directly from bootloader screen:
SPEEDY XA SHIP S-ON
HBOOT-0.98.0001
RADIO-1.08.00.0506
eMMC-boot
April 11 2011, 22:32:34
Is there a way we can flash a file from the SD Card which will turn off the security and/or temp/perm root it? (forgive my noobness for such a question)
EDIT: I'm referring to a way that's outside of the adb push method. My device can't be found, and the device won't get past the bootloader screen, so that method doesn't help me too much. However, I do have the ADK Installed and the ADB Command Line works fine.
Click to expand...
Click to collapse
Sent from my PG06100 using Tapatalk

Also if your phone can't be found its b/c you need to put it into diag mode .. ##DATA .. if you need more help google
tech-9 said:
If you want to root your phone use visionary to temp root then use shift rr .. you can then flash a custom recovery which is essential to avoid this from happening again
Sent from my PG06100 using Tapatalk
Click to expand...
Click to collapse
Sent from my PG06100 using Tapatalk

For the thread starter, the person that sold you the phone probably tried writing to the system partition with s-on. Since you can get to the bootloader, see if you can get into recovery. If you can, recovery can be seen in adb, even the stock recovery. From there, gingerbread root, plenty of guides out there, make sure you flash the misc.img, download the froyo downgrade zip (that pgimg09.zip or something like that, just search for it, but not with the numbers I just gave, those are made up.)
From there either flash the gingerbread zip or ruu, and goon with a unrooted life. Or follow one of the many guides to froyo root, and live the life of the rooted. Your choice.
For the second person with a similar issue, the same method will work for you (assuming you can get to recovery), gingerroot, froyo downgrade, and since you like being unrooted, just ruu or zip back to gingerbread.
Solution found enjoy, and just think, if root hadn't been discovered for gingerbread, you would be screwed right now, make sure to thank otaking.

I have the same boot loop problem. I tried using the PG06IMG.zip file and fastboot/bootloader screen says I have the wrong image. It's most likely because it's for 2.2 and I have 2.3. I also don't have any recovery. Is there a PG06IMG.zip for 2.3 or the like?

similar problem here
i'm fairly certain i tried recovery with the wrong or corrupt or incomplete PG06IMG.zip on my first attempt. i got the right one from here http://forum.xda-developers.com/showthread.php?t=1255474
i ran it, says update installed, but when i reboot i still get the loop
from bootloader
SPEEDY XE SHIP S-ON
HBOOT-0.93.0001
RADIO-1.07.00.1129
eMMC-boot
Nov 15 2010, 13:19:54

zdavidzz said:
i'm fairly certain i tried recovery with the wrong or corrupt or incomplete PG06IMG.zip on my first attempt. i got the right one from here http://forum.xda-developers.com/showthread.php?t=1255474
i ran it, says update installed, but when i reboot i still get the loop
from bootloader
SPEEDY XE SHIP S-ON
HBOOT-0.93.0001
RADIO-1.07.00.1129
eMMC-boot
Nov 15 2010, 13:19:54
Click to expand...
Click to collapse
Try downloading the zip again and re run it. Possibly a bad download?
Sent from my PG06100 using Tapatalk

also adb is telling me device not found. i think i might have to factory reset. is that crazy?
---------- Post added at 01:31 PM ---------- Previous post was at 01:27 PM ----------
and... that didn't help

i'm downloading the zip again right now.
since i have s-on, will i be able to install it though?
i can get the file on the root of the sdcard with an adapter since i can't push from adb. and i can't temp root the phone because if i try a normal reboot i get this stupid boot loop. is there a way to get s-off through hboot on the phone?
i don't know why i didn't notice that first file was messed up, it was only 6MB.

[Q] Can't unbrick. Tried nigh everything.

Greetings! First of all, I would like to thank anyone who takes the time to help me diagnose and resolve this issues, let alone anyone who takes the time to read this thread.
I've been having issues with my Xoom (ICS 4.0.0) for about 3 weeks now.
A brief history of the issue's occurrence:
-I unrooted the device and returned it to stock.
-Everything was fine and dandy until one day it spontaneously said something along the lines of 'Android is upgrading..', and then performed a reset.
-Since resetting, it bootloops.
The device only turns on when plugged into a charger and hard reset.
The device only turns off when allowed to boot loop for minutes and then hard reset (it simply does not reset, and just turns off).
I'm not the most technically-savvy person with android devices but here are some things I've done/noted.
When trying to use adb commands, it does not recognize the device or properly issue commands.
I've tried wiping data/clearing cache to no avail.
EDIT: I've tried fastbooting, but the bootloader will not unlock. When trying to unlock, it simply resets and then acts as though it was never unlocked.
I have no idea how to return it to a stock image. All I know is that I have a micro-SD and some spare time.
Could anyone help me understand what exactly is going on with my Xoom?
If I can provide you with any more information, please let me know.
Thanks again. (=

If it was stock and spontaneously upgraded it sounds like a bad OTA upgrade. I've been rooted from the start so never have taken an OTA upgrade...don't you need to accept it or can it just upgrade on it's own?
Anyway, can you get it into fastboot mode?
Volume up and power, then at dual core screen, press volume down...if you see something like "entering fastboot mode" you're not bricked. You do not have to re lock your bootloader. Just make sure you have downloaded the correct stock files for your Xoom model to your PC and flash it.
If you haven't done so, just google 'recovering Xoom using fastboot' and you should get some good information.
Good luck!

Remember to grab the MZ604 files if you have the Wifi only version of the Xoom.
http://developer.motorola.com/products/software/ <------ Grab the files here. The files are for the US version of the Wifi Xoom only.
Instructions to return it to stock
1) First you need the Moto Drivers - Read this thread to START you - http://forum.xda-developers.com/showthread.php?t=981578
Should have these drivers installed if you have rooted your Xoom before.
2) Make sure you have the latest SDK - adb and fastboot should be in /platform-tools -
http://developer.android.com/sdk/index.html
Should have the android SDK if you have rooted your Xoom before.
3) Place all the downloaded stock image files into the SDK Tools folder.
4) If you are booting up from scratch, you can get the Xoom in fastboot mode by doing the following. Use command prompt to perform the rest of the steps
Hold VolDown and Power button will boot unit for fastboot mode
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
fastboot oem lock
If you Xoom is booted up already follow the commands below using command prompt to perform the steps
adb reboot bootloader <---- reboots the Xoom into fastboot mode.
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
fastboot oem lock
As Always If This Was Helpful Hit the Thanks!

Yeah, what Mjamocha said...

okantomi said:
Yeah, what Mjamocha said...
Click to expand...
Click to collapse
LOL Thanks.

okantomi said:
Anyway, can you get it into fastboot mode?
Click to expand...
Click to collapse
Yes, I can. But so far nothing has been successful in terms of fastboot commands.
okantomi said:
You do not have to re lock your bootloader. Just make sure you have downloaded the correct stock files for your Xoom model to your PC and flash it.
Click to expand...
Click to collapse
When I try to execute fastboot commands such as 'fastboot flash boot boot.img'.. it says the following:
Device still locked. Device must be unlocked first. Failed to process command error(0x8)
Whenever I try to unlock the bootloader, it appears to be successful at first and then the device reboots. But it just reboots to a bootloop, and the bootloader still says its locked. Perhaps I made a mistake in communication. The bootloader is currently locked and will not unlock, as just described.
When I try to unlock it and it reboots, even if I access the fastboot menu right away, it still says the device is still locked.
Thoughts?

Can you get into recovery? With the Xoom off (to make sure it's really off, hold volume up + power for a few seconds), hit the power button and when you see the M logo, wait a very brief moment (like a fraction of a second) and hit the volume down button. When it says "recovery" on the top left, hit the volume up. If you can get in there, either restore a nandroid (if you have one) or do a factory reset.

slacka-vt said:
Can you get into recovery? With the Xoom off (to make sure it's really off, hold volume up + power for a few seconds), hit the power button and when you see the M logo, wait a very brief moment (like a fraction of a second) and hit the volume down button. When it says "recovery" on the top left, hit the volume up. If you can get in there, either restore a nandroid (if you have one) or do a factory reset.
Click to expand...
Click to collapse
Yes, I can get into android recovery. However, within a second of switching into recovery mode, the robot falls down and there appears to be a red triangle caution sign containing an exclamation point.
When trying to do a factory reset, it says all data is wiped (as normal). Upon rebooting, it continues to bootloop. So essentially the factory reset and cache clear options in the Android Recovery menu do not produce the expected results.
Pretty odd. I didn't mess with the Xoom at all prior to this issue.

Try flashing just a recovery img to hopefully get your recovery working again. I think you can flash a custom recovery even if the bootloader is locked (i could be wrong but worth a shot) I attached the Rogue "recovery-rogue-1.3.0.img". Try a "fastboot flash recovery recovery-rogue-1.3.0.img"
EDIT: Sorry, I guess you can't flash a custom recovery with a locked bootloader.

slacka-vt said:
Try flashing just a recovery img to hopefully get your recovery working again. I think you can flash a custom recovery even if the bootloader is locked (i could be wrong but worth a shot) I attached the Rogue "recovery-rogue-1.3.0.img". Try a "fastboot flash recovery recovery-rogue-1.3.0.img"
EDIT: Sorry, I guess you can't flash a custom recovery with a locked bootloader.
Click to expand...
Click to collapse
Yeah, just tried it to no avail. Thanks so much for your help anyway. (=
I'm not sure what to do now.

I would keep trying to unlock it using different USB cables and different USB ports on your computer. I've had unlocks fail a bunch of times and for some reason, it was because of a $hity USB cable and/or a bad port on my computer.

slacka-vt said:
I would keep trying to unlock it using different USB cables and different USB ports on your computer. I've had unlocks fail a bunch of times and for some reason, it was because of a $hity USB cable and/or a bad port on my computer.
Click to expand...
Click to collapse
I hear ya. I've tried 2 different cords and 3 different computers. I'm using a Mac (10.6.8) right now, but have used 2 PCs (Vista + 7).

Out of curiosity, when you tried to flash the custom recovery, did you get the same "device still locked" error or did it appear to flash but then recovery failed?

slacka-vt said:
Out of curiosity, when you tried to flash the custom recovery, did you get the same "device still locked" error or did it appear to flash but then recovery failed?
Click to expand...
Click to collapse
I got the 'device still locked' error. Weird, huh?

How about trying to lock it again even though it says it's locked -maybe it's stuck in an "in-between state"? Try a "fastboot oem lock" and if it finishes then try a "fastboot oem unlock". I know, I'm grabbing at straws here. I thought I bricked my Xoom last week. All I did was an "adb reboot bootloader" and the device went to a black screen. Volume Up + Power did nothing. I ended up buying a T5 (Torx 5) bit at the store, removed the back cover and disconnected the battery for 30 seconds using a piece of paper to separate the contacts. The Xoom booted right up after that.

slacka-vt said:
How about trying to lock it again even though it says it's locked -maybe it's stuck in an "in-between state"? Try a "fastboot oem lock" and if it finishes then try a "fastboot oem unlock". I know, I'm grabbing at straws here. I thought I bricked my Xoom last week. All I did was an "adb reboot bootloader" and the device went to a black screen. Volume Up + Power did nothing. I ended up buying a T5 (Torx 5) bit at the store, removed the back cover and disconnected the battery for 30 seconds using a piece of paper to separate the contacts. The Xoom booted right up after that.
Click to expand...
Click to collapse
Yeah I tried that. Won't lock or unlock successfully. Locking produces no difference, and unlocking produces the same 'device still locked' error. This is getting out of hand! Thanks so much for your advice. You think I should open it up?

I hate to be so persistently annoying about this, but could anyone possibly suggest a method of working around the locked bootloader?
Is there anything I can do with an SD card to remedy the device's stubborn foolery?

I think you should give it a try, I have bricked my xoom a few times and have always been able to flash the stock imagine to recover. You really have nothing to lose by pulling the battery pin just be careful.
Sent from my Xoom using xda premium

I don't know if I'm technically-equipped enough to do that. )=
Sounds easy, but I imagine it would be rather easy to screw something up? Essentially what I should do is unseat the battery, right?

cherlamperter said:
I don't know if I'm technically-equipped enough to do that. )=
Sounds easy, but I imagine it would be rather easy to screw something up? Essentially what I should do is unseat the battery, right?
Click to expand...
Click to collapse
I have looking for a utube how to guide but no luck, I just might make one for you so you will know what to expect. Give me a few and I will get back to ya.
Sent from my Xoom using xda premium

[Q] I'm in lockdown and can't get out.

I bought a HTC One S for T-Mobile USA. Has been working flawlessly. Today I got an OTA and my world is now upside down. I have spent 5 hours trying countless things to get my phone back up to no avail.
my phone stats:
hboot 1.09.0000
radio 0.16.31501s.16_2
open dsp-v28.1.0.32.0504
emmc-boot apr 2 2012,21:08:24
UNLOCKED
TAMPERED
How do I get back to square one and turn this phone back into something usable?
It has something called TWRP 2.1.7 installed on it and I have tried fastboot and a host of other things to remove it. I have even tried the thread on sending your phone back to stock but I can't access RUU because it won't load the driver. I have never rooted this phone nor do I believe USB Debugging was turned on before I accepted the OTA. I can communicate via fastboot in the command shell via a usb cable. The PC wont mound the SD card so I can't copy a new image and reboot this thing on a different rom and then send it back to stock.
I am about ready to throw it away because i can't seem to get a .zip file to it so it will run again (for putting a working build on it). There are no images to boot to. Somehow that got wiped and no backup was done. I don't give a poop if the data is whiped. Its all backed up via dropbox and exchange. I just want it up and running so i can use RUU and send it back to stock.
Any help would be appreciated.

Scuba_Luv said:
I bought a HTC One S for T-Mobile USA. Has been working flawlessly. Today I got an OTA and my world is now upside down. I have spent 5 hours trying countless things to get my phone back up to no avail.
my phone stats:
hboot 1.09.0000
radio 0.16.31501s.16_2
open dsp-v28.1.0.32.0504
emmc-boot apr 2 2012,21:08:24
UNLOCKED
TAMPERED
How do I get back to square one and turn this phone back into something usable?
It has something called TWRP 2.1.7 installed on it and I have tried fastboot and a host of other things to remove it. I have even tried the thread on sending your phone back to stock but I can't access RUU because it won't load the driver. I have never rooted this phone nor do I believe USB Debugging was turned on before I accepted the OTA. I can communicate via fastboot in the command shell via a usb cable. The PC wont mound the SD card so I can't copy a new image and reboot this thing on a different rom and then send it back to stock.
I am about ready to throw it away because i can't seem to get a .zip file to it so it will run again (for putting a working build on it). There are no images to boot to. Somehow that got wiped and no backup was done. I don't give a poop if the data is whiped. Its all backed up via dropbox and exchange. I just want it up and running so i can use RUU and send it back to stock.
Any help would be appreciated.
Click to expand...
Click to collapse
I hate to tell you this but if you never unlocked or rooted your phone, somebody did. Your device is unlocked and running a custom recovery therefore you cannot accept over the air updates and that is your problem. You did not buy your phone that way from T-Mobile so what did you really do to get to this point?

Behold_this said:
I hate to tell you this but if you never unlocked and rooted your phone, somebody did. Your device is unlocked and running a custom recovery therefore you cannot accept over the air updates and that is your problem. You did not buy your phone that way from T-Mobile so what did you really do to get to this point?
Click to expand...
Click to collapse
I never said I bought it as OEM. I also never thought to ask the guy I got it from if he rooted it or unlocked it.

Relocking the boot loader then running an RUU should fix the issue. Once you do that enter the recovery and wipe everything/factory reset.
Then if you are trying to run a custom ROM you should be able to mount your SD card and push one to the phone.
Sent from my HTC One S using xda premium

beats4x said:
Relocking the boot loader then running an RUU should fix the issue. Once you do that enter the recovery and wipe everything/factory reset.
Then if you are trying to run a custom ROM you should be able to mount your SD card and push one to the phone.
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
Great reply however I am short on knowledge on how to do what you have recommended. I don't know how to relock the boot loader nor can I run RUU because I can't get the driver installed. Any help would be awesome. Thank in advance. Sorry I'm a noob at this.

In the dev section there is an all in one toolkit that will execute the correct scripts for you. Download it, then run it. You may also need the HTC sync drivers installed on your computer.
Once you see that the bootloader is locked run the ruu.
And don't apologize for being a noob, I am too lol. We all need help to get started.
Sent from my HTC One S using xda premium

If you install HTC sync to your pc it should install the driver's you need. Then install the one s tool kit in developers section to relock. Then run ruu.

Also, anything you see in blue text is what you'll need to type, or copy/paste, to avoid any quote confusion.
Files You Need:
T-Mobile USA RUU file (mirror) - it's about 563 mb, and worth saving once you download it.
Extremely Important: If you're on another carrier you'll need a different RUU file - DO NOT try and run this RUU file, it could really screw you up. Go to this link to find the right RUU file.
HTC Drivers (mirror) - You probably already have the drivers installed if you're needing this thread, but just in case...
ADB / Fastboot (mirror) - same as the drivers, but again, just in case...
Initial Setup:
Again, some of this might be redundant as you might already have this setup if you rooted/unlocked.
Install the HTC drivers if you haven't already
Unzip the adbfastboot.zip file to your desktop (anywhere, but I find it easiest to get to it on the desktop for my habits)
Getting into the bootloader (hboot):
If you're stuck in a boot loop, pull the batt... oh wait, we can't do that here. To perform a hard reset, hold down the power button for 10 seconds - in the process you'll see the softkeys start blinking, then it should reset. As soon as it starts to reset, release power, and hold down the volume-down button - hold it until hboot pops up (white screen, colored text).
If you're phone is fully powered off (make sure "fastboot" is disabled - settings > power), hold the volume-down key and while holding it, press and hold power for a few seconds. You can probably release the power button, just make sure you keep holding volume-down - after probably 3-5 seconds (maybe a bit more), hboot should come up.
If the phone is on and you're plugged in to your computer, make sure "usb debugging is enabled" (settings > developer options), shift+right-click the adbfastboot directory on your desktop (or wherever you put it), choose "open command window here", and in the prompt that comes up, input adb reboot bootloader.
Restoring:
Once you're in hboot, make sure you select Fastboot (if you don't see it, you're in Fastboot already). In the command prompt referenced above, input fastboot oem lock. This will relock your bootloader in order to allow the RUU to run. Historically this has been necessary for an RUU to run, but I haven't actually tested it without relocking on the One S, and assumed based on previous HTC devices that this would continue to be the case. Edit: thanks rbrookstx for confirming that re-locking is necessary
Your phone will reboot when it relocks - follow the steps above to get back into hboot.
Once you're back in hboot, make sure you're in Fastboot, and open / run the RUU file. It'll go through some initial prompts, then it should start. It takes about 10-15 minutes, maybe less, depending on your computer.
Once it's done, it'll simply go back into hboot - reboot, and you're good to go.
A couple of notes:
When you unlocked and flashed a custom recovery (if you did that), hboot probably said "tampered with" and when it booted up, it probably had a red message under the "HTC" logo about being a developer only device. That should be gone now. It should boot up clean, and hboot should simply say "relocked", with no tampered message.
Until a better solution comes out, once you unlock the bootloader with HTC's official method, it can never be locked the way it was from the factory. "Relocked" is the best you can do.
Click to expand...
Click to collapse
This is what worked. I had to search the internet for this stuff but the HTC driver, the fast boot and the RUU with a matching or higher radio number all made it work out.

[Q] One S Brick? HELP!

Novice here.
Ran the All-in-One utility today and after the CWM installed I hit "Perm root" without reading the thing below telling me to boot to recovery first. It's now stuck in boot loop. Everything went off fine up until the Perm root. Even that said successful and then restarted. Only after the process was completed did the recovery loop begin. No HTC logo loop. Just reboots into CWM over and over no matter what technique I use (except for opening the case).
I've read this: http://forum.xda-developers.com/showthread.php?t=1599363
And am trying to install ADB to push ANY possible ROM over to the SD card. My recovery allows the toggle of /mount sdcard and /mount system, however adb fastboot push doesn't work. "error: device not found"
And I can't do this: http://forum.xda-developers.com/showthread.php?t=1644730 because my phone is stuck in the recovery loop. If I try volume down + power, it just comes back to recovery screen. I've tried factory reset, I've tried wiping cache, I've tried wiping Dalvik, and still nothing. I did flash the SuperSu.zip after I had used the Perm Root button on Haroon2000's app.
I'm incredibly flustered as I've rooted devices for years and this is my first problem. I've seen similar complaints all with ideas of breaking into the phone and unplugging it's battery so I can get to the bootloader etc, but I'm so very confused. So many posts telling me to do so many things.
Can someone please help break down a tangible solution here? I'm freaking out.
Cheers
EDIT: If someone can get my phone fixed, I'll Paypal them $50 USD. I really need my phone back ASAP :\

I don't know if this is your solution, but you did not mention it as one of your attempts.
Have you looked into running an RUU?
Sent from my HTC One S using xda premium

beats4x said:
I don't know if this is your solution, but you did not mention it as one of your attempts.
Have you looked into running an RUU?
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
I'll update this again once I try breaking the phone down and yanking the battery. But I have tried running the RUU. I can't get to the bootloader right now and it's not listing the device when I adb devices.
I'm going to go home from work since I've spent 7 hours on two machines (XP/7) trying to fix this PoS and redo everything from the ground up. Hopefully my anger will have overcome it.
Something I've noticed however, is that within the CWM recovery, I can use the All-in-one tool to reboot the phone. So it is reacting to ADB commands. Perhaps trying to use ADB fastboot (Right-click method) instead of full ADB installation could be a problem with trying to push a ROM zip. Also, as far as the RUU goes. I don't remember what happened there. I'll edit this when I get home.

nik.the said:
I'll update this again once I try breaking the phone down and yanking the battery. But I have tried running the RUU. I can't get to the bootloader right now and it's not listing the device when I adb devices.
I'm going to go home from work since I've spent 7 hours on two machines (XP/7) trying to fix this PoS and redo everything from the ground up. Hopefully my anger will have overcome it.
Something I've noticed however, is that within the CWM recovery, I can use the All-in-one tool to reboot the phone. So it is reacting to ADB commands. Perhaps trying to use ADB fastboot (Right-click method) instead of full ADB installation could be a problem with trying to push a ROM zip. Also, as far as the RUU goes. I don't remember what happened there. I'll edit this when I get home.
Click to expand...
Click to collapse
Okay, update.
I was able to get ADB working and detect my phone.
Next, I was able to push Venom Rom to phone. I factory reset, wiped cache, wiped Dalvik, and was able to install Venom.zip. It then asked to reboot (per Venom screen) and I said okay. It then returned to CWM Recovery. I was confused but left everything as is. I have now reset the phone by holding the power button for around 10 seconds. It then restarted to the HTC Quietly Brilliant screen. I have been looking at that screen for about 5 minutes.
Also pertinent: I did try to run the RUU, but it didn't connect through USB. (I forget what it said verbatim). So that didn't work. I also was able prior to this entire process get into the bootloader via dumb luck.
Any suggestions? I am staring at the HTC boot screen still. Do I try to restart and enter bootloader? If so, then what? It seems there is something wrong with CWM. Can I switch recoveries? Can I uninstall it?

Calm down we have all been there,
When you flashed venom did you flash the boot image? Also i use twrp instead of cwm i find twrp better .
To enter bootloader hold power button and down vol together .

As gazknight said, this seems like proper kernel not being flashed or having an issue. If you flashed the boot.img with fastboot, try again erasing cache from fastboot first. The commands are as follow:
fastboot erase cache
fastboot flash boot boot.img (where this boot.img is the one inside the zip from the rom you choose and must be left in the same folder than fastboot)
It happened to me a couple times when i was on hboot 1.14 that I had to flash the boot.img a second time sometimes, somehow it was not working the first time, randomly, even though the flash had completed ok on fastboot.
If still doesn't work try doing a factory reset from TWRP and flashing ViperOneS again.
If that still doesn't work, you might want to try another rom, like TrickDroid, you would then have to flash the boot.img from this other room with fastboot, remember that.
Try and let us know

Hold down volume down while you're trying to boot, that will get you in boot loader, go to fast boot by pressing the power key, connect your phone to your computer, run the flash viper boot img thingy and you're set!
Envoyé depuis mon HTC One S avec Tapatalk

Same issue with HTC One S bricked but in European version, Stock ROM
hello,
I did't want to start a new topic, as I'm experiencing a similar issue with my HOS. Briefly, yesterday morning I plug the phone from charger at 06.00 am. Play with it for a while and then go to work. Used it at work for a few phone calls until 10.00 am (so 4 hours on fully charge battery). Then at 10.00 am I went into a meeting and left the phone out of my sight for 20-30 minutes. When I came back from the meeting I realize that the phone was closed. I try to open it (power button) but nothing. Press power for 10-30 seconds with volume down - still no effect.
Then I took the charger (the original one that I always use to cherge it) and plug it, left it for 2-3 minutes and press power. The phone starts but all I have is the white screen with HTC logo and if I press the power button + volume down the phone goes into bootloader. That's all I can do with it for now.
I have stock rom, bootloader is locked and I never try to root the phone. Is it any chance to repair it by myself or I have to sent it to the repair shop.
many thanks in advance.

Alright so I feel like I'm getting closer.
Here's whats happening now. It's in the HTC boot screen loop. I can get it into bootloader whenever I want, but now it's not detecting /sdcard in recovery. Within the bootloader, fastboot won't detect my device and my computer (Windows 8) claims the device is malfunctioning. I can still use fastboot adb commands from my computer when it is in recovery. I have gone into bootloader and cleared storage, as well as factory reset after. Also, it used to reboot into recovery endlessly. Now it appears that isn't hte case and reboots from recovery into the OS, but will not work.
I'm going to try and flash using adb w/o sdcard the boot.img as suggested above. I'll keep updating so others can know the process if they soft-brick their phone (I'm assuming this is a soft brick because I can still run things etc).
Update: trying to do fastboot erase cache from within recovery gives me "Waiting for device". As I've said, for some reason, it says the device is malfunctioning/not detected when I'm in the 1.14 Hboot Bootloader. But again, I can issue adb devices from within recovery. Sdcard still not mounting.
Edit: I'm issuing adb commands through adbfastboot files. Do I need to have the Android SDK fully installed with the Manager thing, or does the basic adbfastboot work (From here: http://www.htconeforum.com/forum/ht...e-your-htc-one-s-back-100-stock-relocked.html). That adb fastboot has the following files: adb, fastboot, adbwinapi.dll, adbwinusbapi.dll.
I think the source of the current problem is that I can no longer access my /sdcard or mount it. One step forward, then two steps back -_-.

nik.the said:
Alright so I feel like I'm getting closer.
Here's whats happening now. It's in the HTC boot screen loop. I can get it into bootloader whenever I want, but now it's not detecting /sdcard in recovery. Within the bootloader, fastboot won't detect my device and my computer (Windows 8) claims the device is malfunctioning. I can still use fastboot adb commands from my computer when it is in recovery. I have gone into bootloader and cleared storage, as well as factory reset after. Also, it used to reboot into recovery endlessly. Now it appears that isn't hte case and reboots from recovery into the OS, but will not work.
I'm going to try and flash using adb w/o sdcard the boot.img as suggested above. I'll keep updating so others can know the process if they soft-brick their phone (I'm assuming this is a soft brick because I can still run things etc).
Update: trying to do fastboot erase cache from within recovery gives me "Waiting for device". As I've said, for some reason, it says the device is malfunctioning/not detected when I'm in the 1.14 Hboot Bootloader. But again, I can issue adb devices from within recovery. Sdcard still not mounting.
Edit: I'm issuing adb commands through adbfastboot files. Do I need to have the Android SDK fully installed with the Manager thing, or does the basic adbfastboot work (From here: http://www.htconeforum.com/forum/ht...e-your-htc-one-s-back-100-stock-relocked.html). That adb fastboot has the following files: adb, fastboot, adbwinapi.dll, adbwinusbapi.dll.
I think the source of the current problem is that I can no longer access my /sdcard or mount it. One step forward, then two steps back -_-.
Click to expand...
Click to collapse
You might need to do it as administrator.

I think I've got it. One last tip. All of the above has been helpful, but I think the problem was trying to use my Windows 8 laptop. The second I got to work, I plugged it in on the bootloader to my XP machine and voila! it recognized fastboot and listed devices.
I have tried to run the RUU 2.35.531.7 but just like unrooting my old phone, I had issues because that update was already on this phone, so it goes through the entire process only to tell me on the windows XP utility that it had failed because it was the wrong update. When I did this to my old One S right before I sent it into Tmobile for warranty, it did the same thing with the 1.53 RUU, then when I found the 2.35, it worked like a charm.
So my last question (hopefully) then is, am I missing something as for installing an OLD or exact same RUU? Or is there a newer one than the 2.35.531.7?
I haven't tried on a Windows 7 machine, but I have one available here at work. I'm wondering if I should try to fastboot a ROM. Any suggestions what I can do to get it back to stock, or an old old stock version? I'd like to root it so I can use my Titanium Backup.
Update: Before ending this reply, I read that the RUU may be failing because the bootloader is unlocked/tampered still. I'm going to run it again to grab the error code to make sure of the issue, because it seems you should be able to revert or use any RUU (correct?).

nik.the said:
I think I've got it. One last tip. All of the above has been helpful, but I think the problem was trying to use my Windows 8 laptop. The second I got to work, I plugged it in on the bootloader to my XP machine and voila! it recognized fastboot and listed devices.
I have tried to run the RUU 2.35.531.7 but just like unrooting my old phone, I had issues because that update was already on this phone, so it goes through the entire process only to tell me on the windows XP utility that it had failed because it was the wrong update. When I did this to my old One S right before I sent it into Tmobile for warranty, it did the same thing with the 1.53 RUU, then when I found the 2.35, it worked like a charm.
So my last question (hopefully) then is, am I missing something as for installing an OLD or exact same RUU? Or is there a newer one than the 2.35.531.7?
I haven't tried on a Windows 7 machine, but I have one available here at work. I'm wondering if I should try to fastboot a ROM. Any suggestions what I can do to get it back to stock, or an old old stock version? I'd like to root it so I can use my Titanium Backup.
Update: Before ending this reply, I read that the RUU may be failing because the bootloader is unlocked/tampered still. I'm going to run it again to grab the error code to make sure of the issue, because it seems you should be able to revert or use any RUU (correct?).
Click to expand...
Click to collapse
The bootloader does need to be relocked for the RUU too work and the RUU you used before should work because I have used the same RUU a few times and it worked fine.

Darknites said:
The bootloader does need to be relocked for the RUU too work and the RUU you used before should work because I have used the same RUU a few times and it worked fine.
Click to expand...
Click to collapse
I'll try that. thanks.
Now on the same XP computer, it's not showing when I adb devices, however it does show in device manager. This changed after trying to do the RUU without relocking.

Yeah! Fixed!
After enough toggling, I changed the recovery to the T one and relocked my bootloader. It turns out detecting the device wasn't necessary somehow. Then I ran the RUU and voila!

nik.the said:
I'll try that. thanks.
Now on the same XP computer, it's not showing when I adb devices, however it does show in device manager. This changed after trying to do the RUU without relocking.
Click to expand...
Click to collapse
Not sure whats up with that, never had any issue on win7.

Windows 8 fastboot works on my laptop for some reason. I installed the drivers from the HTC Sync folder.
Sent from my HTC One S using Tapatalk 2