[Q] *ClockWork Mod Recovery Issue. - T-Mobile LG G2x

Hi guys I really hope someone can help me with this. I was running CM7 Nightly rom and decided to try and flash eaglesblood 2.3.5 and it flashed ok but the problem is that when I tried restoring my back-up on it I get an clockworkmod recovery error. Any Ideas?

what does the error say?
most likely it was a bad backup and slim chance of restoration
did u do a full wipe before restoring?

Yes I did a full wipe before flashing and also before I tried to restore my black-up thru rom manager.I have flashed plenty of roms and this phone am not a total noob when it comes to this phone. I have never encountered this problem before. Before i tried going into recovery thru rom manager to restore back up thru CWm 4.0 etc, and it says I need CWM 5.0. I updated the rom manager to 5.0 etc and when I reboot and go into recovery (not thru rom Manager) and it says that it is the 4.0 etc version.Also is the 5.0 etc version blue? it jumps from 4.0 to 5.0 back to 4.0. This is a lil weird I went into recovery and did a restore from there and when I try in RM it comes up with error message Cannot restore cuz my CWm is 4.0 etc. thats when it jumps back from 5.0 to 4.0. I know this is confusing and by the way all the etcs you see are because I don't know the exact version. Any helps and thnx to whomever does.

deder21 said:
Yes I did a full wipe before flashing and also before I tried to restore my black-up thru rom manager.I have flashed plenty of roms and this phone am not a total noob when it comes to this phone. I have never encountered this problem before. Before i tried going into recovery thru rom manager to restore back up thru CWm 4.0 etc, and it says I need CWM 5.0. I updated the rom manager to 5.0 etc and when I reboot and go into recovery (not thru rom Manager) and it says that it is the 4.0 etc version.Also is the 5.0 etc version blue? it jumps from 4.0 to 5.0 back to 4.0. This is a lil weird I went into recovery and did a restore from there and when I try in RM it comes up with error message Cannot restore cuz my CWm is 4.0 etc. thats when it jumps back from 5.0 to 4.0. I know this is confusing and by the way all the etcs you see are because I don't know the exact version. Any helps and thnx to whomever does.
Click to expand...
Click to collapse
You need to update thru NVFlash. Here is the link and everything should be fine after that. http://forum.xda-developers.com/showthread.php?t=1054492

Thanks guys u rock. I got the new CWM on there for nvflash. Now I am moving my saved back up zipped file from downloads to CWM on sd card after I zip it, so well see how this goes right now. THanks again

With the G2X don't use rom manager for your backup/restore. Boot directly into the clockworkmod that you installed with nvflash and do the backup/restore from there.

Related

[Q][GT-i9020a] How do I reflash back to factory?

Hi, new Android user here.
I was trying to root my Nexus S phone yesterday and I'm having problems. There is a lot of rooting guides out there and I used one from xda and also one from unlockr.com. Managed to root the phone ok (I think), but everytime I flash a custom ROM, the phone won't start at all, it just sits at the boot up screen and repeats itself.
So I'm thinking, I should just start over again. So I flash the stock ROM from xda back to 2.3.1. Everything seems ok, the phone starts up... but it's always stuck on airplane mode and the phone itself doesn't even show stuff like IMEI, mac address anymore.
So now I figure I've probably messed the phone up enough and need help lol. How do I go about reflashing the stock ROM and getting my Nexus back to out of the box condition (Stock ROM and no custom bootloader)?? Any guides or step by step instructions would be very helpful.
Thanks
Did you wipe before flashing roms?
Sent from my Nexus S c",)
Maybe flashing the KB2 modem would help that but the 9020a came stock with 2.3.3 and not 2.3.1 so that could be it...I'm not sure but that software wasn't meant at all for ours so it could be part of the problem. But if I was you I'd take a look at this thread wich has all the stock software for your phone. Make sure you wipe everything in clockework and then flash the stock rom. http://forum.xda-developers.com/showpost.php?p=13123996&postcount=39
dsixda uploaded the stock backup and the stock recovery, you can read more at that link, good luck hope it helps
You can download the full stock ROM from the link below:
http://goo.gl/8P8vl
Move the zip file to sdcard. Boot into recovery and flash the ROM. It should get you back to stock 2.3.4 ROM, all locked.
jungbum said:
You can download the full stock ROM from the link below:
Move the zip file to sdcard. Boot into recovery and flash the ROM. It should get you back to stock 2.3.4 ROM, all locked.
Click to expand...
Click to collapse
that did the trick. thanks everyone, now time to try rooting and flashing ROM again!
hrm lol now trying to update it to 2.3.4, it downloaded the update, but on reboot i get the white triangle with ! in it :\
this phone is so messed now
edit: well now everything is ok again, wiped data, flashed with CM7 and now it says 2.3.4, go figure.

[Q] ClockworkMod Recovery, ROM Manager, and Nandroid confusion

So I'm trying to update my rooted 3.0.1 euro 3G xoom to the 3.2 Hammerhead ROM, and here's something that is really confusing me:
I've installed ROM Manager 4.3.3.0 from the Market. Then I downloaded and flashed ClockworkMod Recovery 3.2.0.0 R4c via this thread: http://forum.xda-developers.com/showthread.php?t=1074979
So far so good: I can boot to recovery and it looks that everything is working nicely... with the exception of the following:
1) Even though I have CWM installed, ROM Manager won't recognize it. It keeps asking to install it. I haven't done that though because I don't want to overwrite the one I flashed... how can I get ROM Manager to recognize CWM? Or, if I install a different CWM version through the ROM Manager interface, will that overwrite the existing install, or even break something?
2) I can't find Nandroid in the recovery menu of 3.2.0.0 R4c. It says that it should be there in the Wiki (http://forum.xda-developers.com/wiki/index.php?title=How_to_backup_or_recover_via_Nandroid), but no sir. I only have the options Backup and Advanced Backup in recovery; it doesn't say Nandroid anywhere.
The thing is - I made a normal backup and it created a folder with .img files in it, along with a nandroid.md5 file. So is this a full Nandroid backup or not? And should it not be a zip file? Meaning - will I be able to revert to this backup through ROM Manager or CWM later if it's not a zip?
3) Lastly, I want to install the Tiamat 2.1 Hammerhead ROM. solarnz writes in the instructions in step 6 to "install the rom". So do I do that from recovery? Or from ROM Manager? Which brings me back to my first problem, that ROM Manager won't recognize CWM and won't let me install a ROM without it.
Also - can I install the Hammerhead ROM from my rooted 3.0.1 device at all, or should I install 3.1 first?
I know these are a lot of questions all at once, but after hours and hours of searching and reading (and learning a lot!), I still can't figure this part out.
Many thanks to anyone who can help me make sense of this!
bobblack said:
So I'm trying to update my rooted 3.0.1 euro 3G xoom to the 3.2 Hammerhead ROM, and here's something that is really confusing me:
I've installed ROM Manager 4.3.3.0 from the Market. Then I downloaded and flashed ClockworkMod Recovery 3.2.0.0 R4c via this thread: http://forum.xda-developers.com/showthread.php?t=1074979
So far so good: I can boot to recovery and it looks that everything is working nicely... with the exception of the following:
1) Even though I have CWM installed, ROM Manager won't recognize it. It keeps asking to install it. I haven't done that though because I don't want to overwrite the one I flashed... how can I get ROM Manager to recognize CWM? Or, if I install a different CWM version through the ROM Manager interface, will that overwrite the existing install, or even break something?
2) I can't find Nandroid in the recovery menu of 3.2.0.0 R4c. It says that it should be there in the Wiki (http://forum.xda-developers.com/wiki/index.php?title=How_to_backup_or_recover_via_Nandroid), but no sir. I only have the options Backup and Advanced Backup in recovery; it doesn't say Nandroid anywhere.
The thing is - I made a normal backup and it created a folder with .img files in it, along with a nandroid.md5 file. So is this a full Nandroid backup or not? And should it not be a zip file? Meaning - will I be able to revert to this backup through ROM Manager or CWM later if it's not a zip?
3) Lastly, I want to install the Tiamat 2.1 Hammerhead ROM. solarnz writes in the instructions in step 6 to "install the rom". So do I do that from recovery? Or from ROM Manager? Which brings me back to my first problem, that ROM Manager won't recognize CWM and won't let me install a ROM without it.
Also - can I install the Hammerhead ROM from my rooted 3.0.1 device at all, or should I install 3.1 first?
I know these are a lot of questions all at once, but after hours and hours of searching and reading (and learning a lot!), I still can't figure this part out.
Many thanks to anyone who can help me make sense of this!
Click to expand...
Click to collapse
Forget about Rom Manager. You have the correct recovery installed and you have made a "nandroid" backup when you used the backup option in CWM recovery 3.2.0.0 R4c. The Rom you want to flash needs to be on your MicroSD card and that needs to be in your Xoom when you boot into recovery. It is from the CWM recovery menu that you will choose to flash the zip file that will install the Rom. You will need to be able to boot into recovery and you can do it by pressing volume up and power to get to dual core screen, then after 3 seconds, press volume down then volume up and you should be in recovery. Or you could download Quick Boot from the market and use its boot into recovery option (that's what I do).
About the version you need to be on to flash Hammerhead...what does it say? I think you may need to be on 3.1 but just read the OP on the Hammerhead thread...it will tell you the requirements.
Good luck!
Thanks a lot for explaining that okantomi, that's very helpful and reassuring!
The only thing I'm left with now is to figure out the version part... the rom OP doesn't say anything about a required version. Here's the thread btw: http://forum.xda-developers.com/showthread.php?t=1203635
I made my way through the first 18 or so pages of the 434 total pages in that thread, but still couldn't find any info on that. I'll keep looking - not giving up
Quick update... I decided to just go for it. I flashed the 3.2 ROM onto 3.0.1 - it worked perfectly without any hiccups whatsoever. I'm now running Androud 3.2 with 3G and it works beautifully. Can you see that I'm smiling?
bobblack said:
Quick update... I decided to just go for it. I flashed the 3.2 ROM onto 3.0.1 - it worked perfectly without any hiccups whatsoever. I'm now running Androud 3.2 with 3G and it works beautifully. Can you see that I'm smiling?
Click to expand...
Click to collapse
Me too! ;^ )
Enjoy your shiny new Rom!

Stuck at splash screen after CWM nandroid restore

I have:
Infuse
Infused ROM V2
So today I downloaded "ROM Manager" and "ROM Manager Premium" from the market. AFAIK, this means they are up to date as of today.
Then installed CWM Recovery.
Then installed the 3e mod fix.
Then booted to CWM and did a nandroid backup.
Then booted normally.
Then attempted to install MYUI via ROM Manager download.
It bricked the phone.
Restored the phone with Odin.
Rooted.
Then installed both ROM Managers.
Then installed CWM Recovery.
Then installed the 3e mod fix.
Then booted to CWM and did a restore from the new backup done earlier in the day.
Now it just hangs at the Samsung splash screen.
Any ideas? I have a LOT of investment in the backed up ROM and don't want to lose it.
CZ Eddie said:
I have:
Infuse
Infused ROM V2
So today I downloaded "ROM Manager" and "ROM Manager Premium" from the market. AFAIK, this means they are up to date as of today.
Then installed CWM Recovery.
Then installed the 3e mod fix.
Then booted to CWM and did a nandroid backup.
Then booted normally.
Then attempted to install MYUI via ROM Manager download.
It bricked the phone.
Restored the phone with Odin.
Rooted.
Then installed both ROM Managers.
Then installed CWM Recovery.
Then installed the 3e mod fix.
Then booted to CWM and did a restore from the new backup done earlier in the day.
Now it just hangs at the Samsung splash screen.
Any ideas? I have a LOT of investment in the backed up ROM and don't want to lose it.
Click to expand...
Click to collapse
I dont know what ALOT of investment is.......but what i think happened here is this<<
You were on Gingerbread right, Infused v2.x.x and you made a Nandroid(thats fine)
u installed miUi and didnt have the luck you wanted...Thats fine
You went back to stock, and rooted and modded the Recovery so you could restore your nandroid....Thats fine
But if you went back to stock(Froyo Right) and try to load up a Gringerbread Nandroid on top it shouldnt work. Nandroids only back up the ROM not the Kernel......so you were in a sense trying to run a Gingerbread Rom on a Stock Froyo Kernel......
Go into CWM flash your Kernel, or use odin and flash a Ginger Kernel then go into CWM and RESTORE.
Happy FLashing
Didn't know that! That may explain a lot of my ROM frustrations.
I'll try this and report back.
Off to go find a suitable kernel....
I really should get my post count up so I can get past this horrible 10 post restriction.
Did you try initiating the flash through CWM or through ROM Manager? Honestly I don't prefer to do any work via ROM Manager, I always have more luck going through CWM and starting a flash from there. Kernel is the first place I'd start but you should also Factory Wipe and Cache Wipe each time you move between ROMs, sometimes you get very lucky and don't need to, most times you bork your phone, and if you're nandroiding back from a backup wiping before you restore is good practice just to make sure you don't leave anything behind from your old ROM.
I installed a gingerbread kernel:
http://forum.xda-developers.com/showthread.php?t=1212485
Version 1.1.
But it didn't work out.
So now I'm fighting with trying to get a stock Infused V2 ROM on there.
No luck yet. Once I do, I'll try the recovery again.
Btw, I'm using CWM for everything.
Go to mounts and storage in clockwork recovery then select format system then do your nand restore ...
Sent from my Samsung Infuse 4G - 1.6ghz
Wow, I was totally making some rookie (which I am) Android mistakes today.
Every time I tried to restore the backup image, I was doing it in CWM by selecting "install .zip from SD card". When I SHOULD have been using the "backup/restore" function.
I'm up & running again. All original apps/settings are restored. Great!
Now to start breaking things again, since I know how to restore from backup now.

[Q] Next problem

I upgraded manually to 4.04 coming from 4.03 rooted, i flashed the update file and then flashed Superuser, everything is working fine.
Today i wanted to make a backup with the rommanager, but it seems that the Clockworkmodrecovery isnt there anymore, when i tried to flash clockworkmodrecoveryin standard recovery i get the Signature verification fail and then the android with the exclamation mark.
For the rest the phone works fine. i am confused now, what to do
i have backups of my olders system, from a few days ago, but can i use rommanger to set things back or does that not work anymore because the clockworkmod recovery is missing now.
How can i get back clockworkmod recovery
is this working for you: http://andwise.net/?p=268 ?
No it does not work .
what does not work exactly ??
there is an missing dll in your fastboot exe,
pulled the battery and flashed thru rommanager, then its ok, recovery is there but when i want to make a backup, clockworkmod recovery is gone again after reboot, not sticky i think
Rename "/system/etc/install-recovery.sh" to "/system/etc/install-recovery.sh.bak". All Stock ROMs replace the recovery on each Boot if it isn't the stock one. Renaming this script stops that. After you do this, flash CWM one more time and it'll stick.
Ok thanks, i am just back to 4.03 using a nandroid backup, when i am going back to 4.04 i will try your solution

CWM Backup query - recovery takes off ICS and puts back Gingerbread HELP!

I recently put the newest ICS Lite'ning Rom onto my S2 having backed up everything onto my SD card using CWM. I was previously running Lite'ning V4.2.
The new Rom was successful but when I went to restore all my apps/layout etc from CWM the phone went back to how it was before (V4.2).
I realise that this probably sounds obvious but I had (wrongly) assumed that the CWM backup would restore everything but keep the new Rom.
I am quite new to this, but is there anyway I can download the new ICS Rom and then restore everything I used to have on it without going back to the old Rom.
Please don't flame the newbie!
Ohhh lol its fine. Everyone makes mistakes.
Let me cover the basics. Cwm will restore everything( system, SD card...etc)
OK just download a supported rom. Best to do a clean install. (Search that) . Flash the from, flash the gapps. Reboot once, flash kernel if you want only after the reboot. Sync your email and install the apps.
Unless you did a back up before you stuffed this up just re install back up.
Sent from my Nexus S using XDA
Thanks TigaTiger - great help. All done and very happy.

Categories

Resources