I recently put the newest ICS Lite'ning Rom onto my S2 having backed up everything onto my SD card using CWM. I was previously running Lite'ning V4.2.
The new Rom was successful but when I went to restore all my apps/layout etc from CWM the phone went back to how it was before (V4.2).
I realise that this probably sounds obvious but I had (wrongly) assumed that the CWM backup would restore everything but keep the new Rom.
I am quite new to this, but is there anyway I can download the new ICS Rom and then restore everything I used to have on it without going back to the old Rom.
Please don't flame the newbie!
Ohhh lol its fine. Everyone makes mistakes.
Let me cover the basics. Cwm will restore everything( system, SD card...etc)
OK just download a supported rom. Best to do a clean install. (Search that) . Flash the from, flash the gapps. Reboot once, flash kernel if you want only after the reboot. Sync your email and install the apps.
Unless you did a back up before you stuffed this up just re install back up.
Sent from my Nexus S using XDA
Thanks TigaTiger - great help. All done and very happy.
Related
Hi guys I really hope someone can help me with this. I was running CM7 Nightly rom and decided to try and flash eaglesblood 2.3.5 and it flashed ok but the problem is that when I tried restoring my back-up on it I get an clockworkmod recovery error. Any Ideas?
what does the error say?
most likely it was a bad backup and slim chance of restoration
did u do a full wipe before restoring?
Yes I did a full wipe before flashing and also before I tried to restore my black-up thru rom manager.I have flashed plenty of roms and this phone am not a total noob when it comes to this phone. I have never encountered this problem before. Before i tried going into recovery thru rom manager to restore back up thru CWm 4.0 etc, and it says I need CWM 5.0. I updated the rom manager to 5.0 etc and when I reboot and go into recovery (not thru rom Manager) and it says that it is the 4.0 etc version.Also is the 5.0 etc version blue? it jumps from 4.0 to 5.0 back to 4.0. This is a lil weird I went into recovery and did a restore from there and when I try in RM it comes up with error message Cannot restore cuz my CWm is 4.0 etc. thats when it jumps back from 5.0 to 4.0. I know this is confusing and by the way all the etcs you see are because I don't know the exact version. Any helps and thnx to whomever does.
deder21 said:
Yes I did a full wipe before flashing and also before I tried to restore my black-up thru rom manager.I have flashed plenty of roms and this phone am not a total noob when it comes to this phone. I have never encountered this problem before. Before i tried going into recovery thru rom manager to restore back up thru CWm 4.0 etc, and it says I need CWM 5.0. I updated the rom manager to 5.0 etc and when I reboot and go into recovery (not thru rom Manager) and it says that it is the 4.0 etc version.Also is the 5.0 etc version blue? it jumps from 4.0 to 5.0 back to 4.0. This is a lil weird I went into recovery and did a restore from there and when I try in RM it comes up with error message Cannot restore cuz my CWm is 4.0 etc. thats when it jumps back from 5.0 to 4.0. I know this is confusing and by the way all the etcs you see are because I don't know the exact version. Any helps and thnx to whomever does.
Click to expand...
Click to collapse
You need to update thru NVFlash. Here is the link and everything should be fine after that. http://forum.xda-developers.com/showthread.php?t=1054492
Thanks guys u rock. I got the new CWM on there for nvflash. Now I am moving my saved back up zipped file from downloads to CWM on sd card after I zip it, so well see how this goes right now. THanks again
With the G2X don't use rom manager for your backup/restore. Boot directly into the clockworkmod that you installed with nvflash and do the backup/restore from there.
I have:
Infuse
Infused ROM V2
So today I downloaded "ROM Manager" and "ROM Manager Premium" from the market. AFAIK, this means they are up to date as of today.
Then installed CWM Recovery.
Then installed the 3e mod fix.
Then booted to CWM and did a nandroid backup.
Then booted normally.
Then attempted to install MYUI via ROM Manager download.
It bricked the phone.
Restored the phone with Odin.
Rooted.
Then installed both ROM Managers.
Then installed CWM Recovery.
Then installed the 3e mod fix.
Then booted to CWM and did a restore from the new backup done earlier in the day.
Now it just hangs at the Samsung splash screen.
Any ideas? I have a LOT of investment in the backed up ROM and don't want to lose it.
CZ Eddie said:
I have:
Infuse
Infused ROM V2
So today I downloaded "ROM Manager" and "ROM Manager Premium" from the market. AFAIK, this means they are up to date as of today.
Then installed CWM Recovery.
Then installed the 3e mod fix.
Then booted to CWM and did a nandroid backup.
Then booted normally.
Then attempted to install MYUI via ROM Manager download.
It bricked the phone.
Restored the phone with Odin.
Rooted.
Then installed both ROM Managers.
Then installed CWM Recovery.
Then installed the 3e mod fix.
Then booted to CWM and did a restore from the new backup done earlier in the day.
Now it just hangs at the Samsung splash screen.
Any ideas? I have a LOT of investment in the backed up ROM and don't want to lose it.
Click to expand...
Click to collapse
I dont know what ALOT of investment is.......but what i think happened here is this<<
You were on Gingerbread right, Infused v2.x.x and you made a Nandroid(thats fine)
u installed miUi and didnt have the luck you wanted...Thats fine
You went back to stock, and rooted and modded the Recovery so you could restore your nandroid....Thats fine
But if you went back to stock(Froyo Right) and try to load up a Gringerbread Nandroid on top it shouldnt work. Nandroids only back up the ROM not the Kernel......so you were in a sense trying to run a Gingerbread Rom on a Stock Froyo Kernel......
Go into CWM flash your Kernel, or use odin and flash a Ginger Kernel then go into CWM and RESTORE.
Happy FLashing
Didn't know that! That may explain a lot of my ROM frustrations.
I'll try this and report back.
Off to go find a suitable kernel....
I really should get my post count up so I can get past this horrible 10 post restriction.
Did you try initiating the flash through CWM or through ROM Manager? Honestly I don't prefer to do any work via ROM Manager, I always have more luck going through CWM and starting a flash from there. Kernel is the first place I'd start but you should also Factory Wipe and Cache Wipe each time you move between ROMs, sometimes you get very lucky and don't need to, most times you bork your phone, and if you're nandroiding back from a backup wiping before you restore is good practice just to make sure you don't leave anything behind from your old ROM.
I installed a gingerbread kernel:
http://forum.xda-developers.com/showthread.php?t=1212485
Version 1.1.
But it didn't work out.
So now I'm fighting with trying to get a stock Infused V2 ROM on there.
No luck yet. Once I do, I'll try the recovery again.
Btw, I'm using CWM for everything.
Go to mounts and storage in clockwork recovery then select format system then do your nand restore ...
Sent from my Samsung Infuse 4G - 1.6ghz
Wow, I was totally making some rookie (which I am) Android mistakes today.
Every time I tried to restore the backup image, I was doing it in CWM by selecting "install .zip from SD card". When I SHOULD have been using the "backup/restore" function.
I'm up & running again. All original apps/settings are restored. Great!
Now to start breaking things again, since I know how to restore from backup now.
Got the new i727 from Rogers. First time Android user, come from the BB world.
Want to back up my stock ROM. Installed paid version of Rom Toolbox. Went to the Manage ROM section, and it told me I had to have ROM Manager.
Downloaded the free version of ROM manager, and it told me I had to have ClockworkMod installed, and asked if I wanted to install it.
Said YES, and it took me to a group of phones, not the SGS2 LTE. So I cancelled.
So three questions:
1. When I buy Rom Toolbox, why do I have to then get ROM Manager?
2. What is ClockworkMod?
3. Which phone do I select that will work on my Rogers Samsung Galaxy S2, and will that finally allow me to back up my stock ROM.
Thanks
Harry Fine
I'm not familiar with ROM Toolbox, nor do I know why you would use it. I'm not much of a fan of ROM Manager, either, but it does work. Install it, and select the T-Mobile SGS2 to get CWM installed. You can then take a Nandroid backup.
That said, backups of untouched stock ROMs are much less needed when there's already an Odin TAR out.
What does it mean to "take a nandroid" backup?
Got it. Installed CWM and did the ROM backup, now have a Nandroid backup, also copied to PC. I'm assuming if I've done this correctly, I can now re-install the stock ROM if I had to.
Once I have a nandroid backup that is known to be good, is there any situation (other than hardware) that would prevent me from un-bricking my phone by simply installing a known good ROM?
As long as you have a backup and are able to access CWM...flash away
Sent from my SGH-I727R using XDA App
And where is CWM? Is it on the ROM itself, or on the boot sector? If the ROM is bad, or boot sector becomes corrupted, how do you access CWM?
And even if you can't access CWM - in other words, if you can't get past the Samsung logo - you can always return to stock with Odin.
basically as long as you can boot to either download mode or recovery you're safe.
Sent from my SGH-I727R using XDA App
Currently I am in a soft brick state- I cant remember which CM- 9 either cm-9-20120614-EXPERIMENTAL-skyrocket-alpha5.zip, or cm-9-20120709-NIGHTLY... (I can see that those are the only two I have on my sd card. I am on an ATT GS2 skyrocket
If I boot normally - it stays stuck on the CM9boot screen.
I can use the 3 finger method to boot into CWM 5.8.4.3
While searching for answers I read that this CWM is broken.
Initially I was trying to go back to an earlier recovery. CWM would see the recoveries on the SDcard, but when I tried to recover- it would not mount from the SD card.
I got to CM( by using odin to put an earlier CWM, and superuser on the phone, then installed Rom manager, then used rom manager to flash CWM (via tmobile sgs2) then updated to CWM touch...
When I tried using the CWM to factory restore and cache wipe it starts then hangs I cant install zips from the external SD card, or any recoveries...
I'm figuring worst case - I can go back to ODIN, and do stock recovery http://forum.xda-developers.com/showthread.php?t=1342348 , then flash the non touch CWM, superuser http://forum.xda-developers.com/showthread.php?t=1340526, then flash a recovery from my sd card??
Is there something else I might have missed in trying to get back to a functional state without going to odin?
Many thanks in advance for any assistance
Ihab
ihabelnaccash said:
Currently I am in a soft brick state- I cant remember which CM- 9 either cm-9-20120614-EXPERIMENTAL-skyrocket-alpha5.zip, or cm-9-20120709-NIGHTLY... (I can see that those are the only two I have on my sd card. I am on an ATT GS2 skyrocket
If I boot normally - it stays stuck on the CM9boot screen.
I can use the 3 finger method to boot into CWM 5.8.4.3
While searching for answers I read that this CWM is broken.
Initially I was trying to go back to an earlier recovery. CWM would see the recoveries on the SDcard, but when I tried to recover- it would not mount from the SD card.
I got to CM( by using odin to put an earlier CWM, and superuser on the phone, then installed Rom manager, then used rom manager to flash CWM (via tmobile sgs2) then updated to CWM touch...
When I tried using the CWM to factory restore and cache wipe it starts then hangs I cant install zips from the external SD card, or any recoveries...
I'm figuring worst case - I can go back to ODIN, and do stock recovery http://forum.xda-developers.com/showthread.php?t=1342348 , then flash the non touch CWM, superuser http://forum.xda-developers.com/showthread.php?t=1340526, then flash a recovery from my sd card??
Is there something else I might have missed in trying to get back to a functional state without going to odin?
Many thanks in advance for any assistance
Ihab
Click to expand...
Click to collapse
Hi there,
I recently experienced the same thing, and it was a hassle to fix--but I have got my phone working each time. The downside being that I /had/ to switch over to Odin. Mind you, I am not necessarily experienced with Android, so I can't really say that this is the only way.
At any rate, here's what I did to get it back to normal:
Load up Odin
Put it in download mode -- I assume you know to hold the volume keys and then plug in the USB.
Flash either the ICS leak or the stock 2.3.5 Gingerbread.
You should be back to good. I hope you backed everything up in either Kies or some other resource...else you're in for a hell of a time setting stuff up.
Oh: bad news about the 2.3.5 stock is that, as far as I can tell, you're unable to upgrade to 2.3.6. In turn, you're then unable to update to the official ICS through Kies or OTA. I assume you don't mind, considering you're trying to flash a new rom anyway.
Anyway, I do hope there is some bit of clarity on getting CM9 on the Skyrocket. As of now I have still been unable to do it. Just as you, no matter the settings I try, I end up being stuck at that screen. The only difference between your method and mine is that I completely did mine through CWM...nothing through ROM Manager. (Actually, I believe I tried a few differing methods involving the CWM touch and non-touch...followed many different guides but still no good.)
Hope you get it back to a functioning state. If you get CM9 working on the Skyrocket, I'd appreciate you sending a bit of details on how to do so.
EDIT: I am now on CM9. Through magic, ponies and friendship I have failed to accomplish this feat. But by pure science and the blood of a pony, I have successfully installed CM9.
After you've restored to 2.3.5 or the ICS leak (the one I was on), do the following:
- Grab the recovery-clockwork-touch U27 described below. Flash it.
- Download both the newest CM9 build from their website, as well as Google Apps, and then copy those to your external SD.
- Follow this guide: http://www.teamchopsticks.org/p/install-guide.html. Here's what's relevant to you:
Wipe data/factory reset.
Format /system (mounts and storage->format /system).
Install the CM9 zip from SD card.
Install the gapps zip from SD card.
ONLY IF YOU ARE ON TOUCH CWM RECOVERY: Format /cache (mounts and storage->format /cache)
Reboot. Let it sit for a few minutes after the first boot. Be patient.\
Click to expand...
Click to collapse
After ~10 minutes you should be fine. Mine took less, but I'd bet it could take longer. Please follow those directions above EXACTLY. I'll be happy to help you in any way I can if you reply to this thread/ send me a PM.
When I softbricked with the latest CWM I wasn't able to return back since it wouldnt detect my SDcard so I just loaded up odin and used recovery-clockwork-touch-5.8.1.3-hercules.tar and was able to read my SDcard again which had all my backups and CM9 files. I have flashed every version of CM9 every since and still using this CWM version and havent had any problems. :good:
All better now- I used ODIN to restore to stock, then used it again to put CWM (non-touch) back on, then added superuser, then just did a restore from SDcard! Muchas Gracias all!
Should I be able to then use a restore of when I had a working CM9 (and backed up with CWM)? Or would I have to do all the cache wiping/ factory reset like I did to install it the first time before using such a recovery? (and I will try that recovery- clockwork touch hercules... latrer tonight from home)
ODIN tar to restore back to factory. I got the boot loop too. Only until after I flashed CM9 then flashed dark side wipe cache only would CM9 work for me. Only on regular CWM though. Try and give that a go.
Sent from my SAMSUNG-SGH-I727
i have installed cm10 on htc one v primo-u (india gsm ) and i wish to revert to the original image.
i tried to flash India_1567201recovery_signed.img file but no success.
can someone help me with a procedure how to revert to either 1.56.720 or 2.09.720 image of the phone
romah1 said:
i have installed cm10 on htc one v primo-u (india gsm ) and i wish to revert to the original image.
i tried to flash India_1567201recovery_signed.img file but no success.
can someone help me with a procedure how to revert to either 1.56.720 or 2.09.720 image of the phone
Click to expand...
Click to collapse
How did you try to flash the RUU? You can not flash it like a normal ROM
Also if you are looking for the RUU try HERE
I see what you're trying to do, that won't work...you can't flash a recovery to get to stock because stock phone won't flash from recovery, which is why once you get root the first thing you do is flash a custom recovery. Use the RUU to flash it back to shipped state stock, or if you are trying to keep root and just want to use a different ROM. More clarification on what you are trying to accomplish would be nice.
If you did a Nandroid prior to flashing CM10 I would wipe all partitions except SD and restore the Nandroid, if all you want to do is get CM10 off your phone. Remember Nandroid Backups are your friend do them before flashing anything and save them to your PC if you don't want the SD space taken. Doing this has made flashing pain free and hassle free. If I don't like how my phone is running after a flash I can always get it right back to how it was when I was happy with it. Lastly there was a time when I had a Nandroid backup of a Sense ROM and was on AOSP and wanted to flash back to Sense, well my Backup wouldn't flash. After spending hours raising hell I did a clean install of the ROM booted once, then rebooted into recovery and flashed the Nandroid backup that had the settings I was using (when I was on Sense, it won't restore data and apps used on AOSP)...sorry if its not much help but more details are needed. But you have a starting point.
ItzCrooK2UxD said:
How did you try to flash the RUU? You can not flash it like a normal ROM
Also if you are looking for the RUU try HERE
I see what you're trying to do, that won't work...you can't flash a recovery to get to stock because stock phone won't flash from recovery, which is why once you get root the first thing you do is flash a custom recovery. Use the RUU to flash it back to shipped state stock, or if you are trying to keep root and just want to use a different ROM. More clarification on what you are trying to accomplish would be nice.
If you did a Nandroid prior to flashing CM10 I would wipe all partitions except SD and restore the Nandroid, if all you want to do is get CM10 off your phone. Remember Nandroid Backups are your friend do them before flashing anything and save them to your PC if you don't want the SD space taken. Doing this has made flashing pain free and hassle free. If I don't like how my phone is running after a flash I can always get it right back to how it was when I was happy with it. Lastly there was a time when I had a Nandroid backup of a Sense ROM and was on AOSP and wanted to flash back to Sense, well my Backup wouldn't flash. After spending hours raising hell I did a clean install of the ROM booted once, then rebooted into recovery and flashed the Nandroid backup that had the settings I was using (when I was on Sense, it won't restore data and apps used on AOSP)...sorry if its not much help but more details are needed. But you have a starting point.
Click to expand...
Click to collapse
i have installed CM10 without backing up any image, therefore i cannot restore the orifginal vendor's rom. Nandroid back would have prevented this situation. the second problem is that I couldnt find any RUU for this phone. indeed the link you attached seems to have it bu unfortunately it is in chineese and after pushing all the buttons i couldn't download the file. so my options are
1- to pray that someone will be kind enough to publish it in a manner that it is accessible
2- I have a friend with a simillar phone , can i somehow back up hus rom and restore it in mine ????
thank
romah1