I'm trying to calibrate my NS (i9020T) because it seems like battery drains quite fast after frequent flashing ROMs. Last time I calibrated was about 4 months ago.
But the problem is that it won't charge beyond 99%. It used to charge up to 100% before if I leave the screen on.
But don't I need to get battery % to 100% (that's what calibration app says)..?
How can I get it back to 100% charge?
Thanks!
droidance said:
I'm trying to calibrate my NS (i9020T) because it seems like battery drains quite fast after frequent flashing ROMs. Last time I calibrated was about 4 months ago.
But the problem is that it won't charge beyond 99%. It used to charge up to 100% before if I leave the screen on.
But don't I need to get battery % to 100% (that's what calibration app says)..?
How can I get it back to 100% charge?
Thanks!
Click to expand...
Click to collapse
Not sure if it works ffor ns, but drain your battery, go to data/system and delete batterystat or something along those lines and reboot. Let it charge for awhile and it should go to 100% . If it works you don't need to calibrate anymore as that's how normal apps calibrate.
Sent from my Sensation
droidance said:
I'm trying to calibrate my NS (i9020T) because it seems like battery drains quite fast after frequent flashing ROMs. Last time I calibrated was about 4 months ago.
But the problem is that it won't charge beyond 99%. It used to charge up to 100% before if I leave the screen on.
But don't I need to get battery % to 100% (that's what calibration app says)..?
How can I get it back to 100% charge?
Thanks!
Click to expand...
Click to collapse
drain your battery, delete the batterystats.bin, reboot, then charge all the way. chances are is that you had to wait a bit longer for it to hit 100%. when i charge my phone to 100, sometimes it takes an hour to go from 99 to 100%. be patient, if that 1% is worth it. the more you play with your phone between 99 and 100%, the longer it will take.
simms22 said:
drain your battery, delete the batterystats.bin, reboot, then charge all the way. chances are is that you had to wait a bit longer for it to hit 100%. when i charge my phone to 100, sometimes it takes an hour to go from 99 to 100%. be patient, if that 1% is worth it. the more you play with your phone between 99 and 100%, the longer it will take.
Click to expand...
Click to collapse
I waited 5 hours but it was still at 99%. I had to leave home so I couldn't charge any longer...
So drain it first, delete batterystats.bin, and it should charge to 100%? Because the app I downloaded says, charge it to 100% then delete batterystats.bin.. etc.
droidance said:
I waited 5 hours but it was still at 99%. I had to leave home so I couldn't charge any longer...
So drain it first, delete batterystats.bin, and it should charge to 100%? Because the app I downloaded says, charge it to 100% then delete batterystats.bin.. etc.
Click to expand...
Click to collapse
You can do it twice if you want.
Sent from my Sensation
droidance said:
I waited 5 hours but it was still at 99%. I had to leave home so I couldn't charge any longer...
So drain it first, delete batterystats.bin, and it should charge to 100%? Because the app I downloaded says, charge it to 100% then delete batterystats.bin.. etc.
Click to expand...
Click to collapse
you must had something running in the background. believe me, the different between 99 and 100 is almost non-existant
The last 10-20% trickles in. 5hours is way too long though. What does your voltz read bc you can have a full charge as far as voltz go but may be getting a faulty % reading on the charge.
If you use the apk make sure you don't power off or you will regenerate the battstat through normal process and then the app is pointless. Try charging overnight and see if you can get to 100%.
Fyi/beware draining your battery to 0 is not good. Some batteries and phones have a hard time getting through first boot when there is little to no charge in the battery. Whenever I use the calibration apk, I never go below 10%. Anything below that can cause some funk.
I drained it all the way and deleted batterystats.bin, charged it all the way back overnight, but it doesn't go over 99% for many hours. I stopped all the services I could possible (kept only the essentials)...
Current Charge: 99%
Voltage: 4.176 mV
Temperature: 33.0c
droidance said:
I drained it all the way and deleted batterystats.bin, charged it all the way back overnight, but it doesn't go over 99% for many hours. I stopped all the services I could possible (kept only the essentials)...
Current Charge: 99%
Voltage: 4.176 mV
Temperature: 33.0c
Click to expand...
Click to collapse
4.176 mV is fully charged.
kenvan19 said:
4.176 mV is fully charged.
Click to expand...
Click to collapse
So it's simply misinterpretation of the battery that it doesn't read 100%?
Well, I started calibrating about an hour ago. I thought it shouldn't matter too much.
droidance said:
So it's simply misinterpretation of the battery that it doesn't read 100%?
Well, I started calibrating about an hour ago. I thought it shouldn't matter too much.
Click to expand...
Click to collapse
Yes your phone sometimes gets out of sync with its self and starts thinking that its fully charged or fully discharged when its not. The way I typically calibrate my battery is to turn it off and let it charge until it stops (this is easy to see since the screen lights up and the battery shown on the screen stops unfilling and refilling). I then unplug it and boot it up. Again, shut it down and plug it in and let it charge until it thinks its full. Again, turn it on this time letting it charge to what it thinks is full while on. Finally restart into CWM and use its too for wiping battery stats. After all that I also like to let it die before I plug it in again.
kenvan19 said:
4.176 mV is fully charged.
Click to expand...
Click to collapse
i get 4195-4196 as a full charge. once i hit 4197.
simms22 said:
drain your battery, delete the batterystats.bin, reboot, then charge all the way. chances are is that you had to wait a bit longer for it to hit 100%. when i charge my phone to 100, sometimes it takes an hour to go from 99 to 100%. be patient, if that 1% is worth it. the more you play with your phone between 99 and 100%, the longer it will take.
Click to expand...
Click to collapse
where is the location of batterystat.bin?
al_madd said:
where is the location of batterystat.bin?
Click to expand...
Click to collapse
Did you even bother reading? It's in the 2nd post. Data/system
Sent g.
Related
Hey i flashed my device with the battery at around 80%.
after the flash it was 100%...
so this means i just lost 20% of my capacity? how do i fix this?
Imperium said:
Hey i flashed my device with the battery at around 80%.
after the flash it was 100%...
so this means i just lost 20% of my capacity? how do i fix this?
Click to expand...
Click to collapse
I don't believe you have lost capacity. It's only your gauge that's slightly altered. If you recharge your device fully(and about an extra 30min) you should have the regular capacity
How could going from 80% to 100% equate to a lost ???
it's posible that you'd gained the extra charges while the flashing process was going on ( because it was plugged in ?? ) ... if it wasn't ... no idea why
UnicornKaz said:
How could going from 80% to 100% equate to a lost ???
Click to expand...
Click to collapse
If i understand the post correctly they are equating am 80% to 100% a loss for 2 reasons:
1. because he would have lost charge while flashing due to the massive battery drain.
2. because now he is stating that his 100% is really only 80%
but i would probably just leave it charge overnight and you should be fine, the gauge just sounds to be off, it shouldnt be a true loss (unless the battery is bad)
Is there any other way to sync the battery with the device? I been trying a full discharge then charge.
I am using a mugen extended 3000mah battery and at 15% 10% and 1% it will stay there for some time before it starts to go down or turn off completely if it is reaches less than 1%.
I don't think you've lost capacity.
I believe you just did a quick check before flashing (and it was already charging before you started right?), and the battery gauge wasn't updated. I had this a couple of times while recharging. I take a quick look and think "this is gonna take another half hour". Five minutes latter I check and the charge led is green again.
Sometimes the battery metter lags a bit, you have to check it again to be sure when charging.
At least it happens to me.
BUMP THAT said:
Is there any other way to sync the battery with the device? I been trying a full discharge then charge.
I am using a mugen extended 3000mah battery and at 15% 10% and 1% it will stay there for some time before it starts to go down or turn off completely if it is reaches less than 1%.
Click to expand...
Click to collapse
a few cycles of full charge and discharge should put the battery meter in check...
shogunmark said:
a few cycles of full charge and discharge should put the battery meter in check...
Click to expand...
Click to collapse
Alrighty. I have done three so far. It has gotten better then the first time I got it. But its not perfect.
is it safe to discharge it to 0% so that it will shutdown? or what?
To help with Battery Life you can do these steps exactly:
1) Turn your device ON and Charge the device for 8 hours or more
2) Unplug the device and Turn the phone OFF and charge for 1 hour
3) Unplug the device Turn ON wait 2 minutes and Turn OFF and charge for another hour Your battery life should almost double, I tested this on my pops evo and my epic...MAJOR DIFFERENCE
After installing a new Kernel it is recommended tat you recalibrate our battery to get the most life out of your battery. I suggest using Phoenix kernel but your a grown man[or woman] choose your kernel
Hope this helps
Thx to bigdbag for these additional steps
Post #21
My god. I was highly skeptical of this but I tried a quick version of the instructions.
I did the following:
1. Charge to 100% while phone = ON
2. Once at 100%, unplug charger and turn phone OFF
3. Plug in charger for 5 minutes while phone = OFF
4. Unplug charger and turn phone ON
5. Leave phone ON for 5 minutes
6. Plug in charger for 5 minutes while phone = OFF
and the results... are miraculous. I'm running Phoenix Kernel v.1.43 and stock rom w/ drm removed.
Click to expand...
Click to collapse
Trick trick trick trickle charge Battery is in fast charge mode when it begins charging from a certain percentage (although slow). When the charge is in the 90's and you unplug and plug it back in it trickle charges to completion. This does indeed work. Works best in my opinion when you do this after you let the battery completely drain, plug in, recovery mode, wipe battery stats and then turn on.
And then do what you stated above.
Yes!!!!!!!!
Totally gonna do this since my battery seems to be on the down side compared to everyone else's. :]
dcorn619 said:
Totally gonna do this since my battery seems to be on the down side compared to everyone else's. :]
Click to expand...
Click to collapse
i also reccomend an external battery charger that u place the battery into. no need for the trick. Ive used this trick before i got the external charger and yes it does work very well!
+1 on the ext charger. I have two batt. If I charge with the phone... one- goes from 100 to 97 withing sec from when I unplug it and two- it doesn't last as long. Using the charge and switching out the batts. Stays at 100 for a while and it will last forever too.
Sent from my SPH-D700
a454nova said:
+1 on the ext charger. I have two batt. If I charge with the phone... one- goes from 100 to 97 withing sec from when I unplug
Sent from my SPH-D700
Click to expand...
Click to collapse
I noticed this as well, so when my indicator LED turns blue and it says 100%, I unplug, then immediately plug back in until blue.. lather rinse repeat.. after about 3 or 4 times it finally stays at 100% when unplugged..
That being said, I'm gonna have to try to find an external charger and another battery...
My local sprint store sells a charger with extra battery for $49.99. Its an external charger that fits in your pocket. With charging cord of course.
Zei said:
To help with Battery Life you can do these steps exactly:
1) Turn your device ON and Charge the device for 8 hours or more
2) Unplug the device and Turn the phone OFF and charge for 1 hour
3) Unplug the device Turn ON wait 2 minutes and Turn OFF and charge for another hour Your battery life should almost double, I tested this on my pops evo and my epic...MAJOR DIFFERENCE
Hope this helps
Click to expand...
Click to collapse
tried this, doesnt' seem to work for me. I unplugged, turned phone off, and charged, but phone said fully charged after like 15 minutes, I assume once it says 100% on the green battery that shows up when phone is off that I shouldn't just let it sit there? its not charging at that point anymore is it?
then i unplugged, turned on phone, waited 2 minutes, turned off, charged again, 15 minutes or so it was fully charged again.
This reminds me of the chargobics that some ppl did on their evo to get better battery life....never really helped me.
gazment said:
Trick trick trick trickle charge Battery is in fast charge mode when it begins charging from a certain percentage (although slow). When the charge is in the 90's and you unplug and plug it back in it trickle charges to completion. This does indeed work. Works best in my opinion when you do this after you let the battery completely drain, plug in, recovery mode, wipe battery stats and then turn on.
And then do what you stated above.
Click to expand...
Click to collapse
So what you're suggesting (re: recovery/battery stats) is the following:
1. use the phone until the battery completely dies.
2. plug the phone in
3. boot into recovery (clockwork ?)
4. wipe battery stats
5. turn the phone on
6. do the 'plug me in' dance after it's fully charged
What if the battery is fully charged and you wipe the battery stats ?
idk i think i used to do something similar on my Hero and even back on my (WinMo) Mogul and Touch Pro and never really got much out of it......
However, today I did this and I swear I'm getting great battery life today. Have never gotten past 12 hours and I'm currently sitting at about 40% left at 12 hours. Could be the placebo effect but we'll see..... even played some angry birds today.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=370437955345&ssPageName=STRK:MEWNX:IT
FTW!!!
Took 11 days to get here, but worth EVERY penny. I never need to worry about to battery life anymore. Hell, now that I charge my batteries using the external charger, I get atleast 8-10 hours with constant use, and my battery doesn't drop from 100 right away. I never get to the 3rd battery by the end of the day and thats with a 18 hour day unplugged. Worth it.
I have noticed some weirdness with the battery. I looked at the juiceplotter graph after the battery had been left charging all night, and it would charge to 100 and then over th course of half an hour drop down to 95% or so and then recharge up to 100 over and over and over again. I have taken it off the charger sometimes and the battery has gone from 100% to 96 % within a couple minutes and other times it stays at 100% for over an hour. It was a matter of luck as to when I pulled my phone off I guess, when it was really at 100% or really at 95-97% or anywhere inbetween.
Gonna try this PITA method of charging. Hope it works, but damn is it inconvenient.
The external battery charger is the way to go. i have also noticed when i rarely charge from the phone that it sometimes wont stay at 100 but for a minute then drop to 97. i get 55 hours to one battery with moderate usage.
This didnt really do anything. Unplugged from my charger at 1:50pm, its been exactly 2 hours and its at 77%. Mostly my phone was in my pocket, and I did very light browsing over 3g (maybe 10 minutes).
I'm on Latest Epic Experience with Mixup Kernel. And I don't have OC widget or Setcpu.
omair2005 said:
This didnt really do anything. Unplugged from my charger at 1:50pm, its been exactly 2 hours and its at 77%. Mostly my phone was in my pocket, and I did very light browsing over 3g (maybe 10 minutes).
I'm on Latest Epic Experience with Mixup Kernel. And I don't have OC widget or Setcpu.
Click to expand...
Click to collapse
Try running the same setup with phoenix 1.43 kernel. Still super snappy and way better battery then mix up.
I'm also using external charger, 30+hrs with screen on for 6hrs
sewhuy said:
Try running the same setup with phoenix 1.43 kernel. Still super snappy and way better battery then mix up.
I'm also using external charger, 30+hrs with screen on for 6hrs
Click to expand...
Click to collapse
Is it really that much better? If so, what causes it to be better on battery life? I am getting great battery life using the mixup kernel because I have juicedefender and setcpu working hard to conserve battery life. Would Phoenix make a difference?
Just a FYI, Lithium-Ion batteries don't hold a memory like NiCad batteries did. It is also NOT good to drain them all the way down.
read and follow directions
robl45 said:
tried this, doesnt' seem to work for me. I unplugged, turned phone off, and charged, but phone said fully charged after like 15 minutes, I assume once it says 100% on the green battery that shows up when phone is off that I shouldn't just let it sit there? its not charging at that point anymore is it?
then i unplugged, turned on phone, waited 2 minutes, turned off, charged again, 15 minutes or so it was fully charged again.
Click to expand...
Click to collapse
Following the directions exactly. dont think follow directions
sewhuy said:
Try running the same setup with phoenix 1.43 kernel. Still super snappy and way better battery then mix up.
I'm also using external charger, 30+hrs with screen on for 6hrs
Click to expand...
Click to collapse
Do I have to wipe anything?
Good Morning everybody!
I think I have a defective thunderbolt battery, sometimes when I pull my phone off the charger it drops to 95%. Funny thing this is not a everyday thing. Anybody having a similar problem like this? Sorry if this been discuss before. Have a bless day everybody...on my way to the office.
I have the same thing happen. There is something goofy with how the meter reports battery level. If you reboot your phone it drops even more.
Sent from my ADR6400L using XDA Premium App
Yea I notice that too. I seen my battery drop down 15 percent after rebooting. Is the battery defective? Or the phone is defective?
Bump charge it. Charge it all the way. Unplug, turn it off, then on, and keep charging.
Sent from my ADR6400L using XDA App
The phone/battery aren't defective. I have the extended battery so I never bump charge it, but he is right. Charge it up until your charging light goes green, unplug it and then turn it off. Once it shuts down, plug it back in and will now be orange. Charge it until it's green again. Sometimes it will take a few minutes, sometimes an hour. I'm also color blind so I can never tell whether that damned light is red/orange/green. >.<
chrisjm00 said:
The phone/battery aren't defective. I have the extended battery so I never bump charge it, but he is right. Charge it up until your charging light goes green, unplug it and then turn it off. Once it shuts down, plug it back in and will now be orange. Charge it until it's green again. Sometimes it will take a few minutes, sometimes an hour. I'm also color blind so I can never tell whether that damned light is red/orange/green. >.<
Click to expand...
Click to collapse
He gonna have to turn it on then plug the charger in. If left off then plugged in the phone will boot into recovery.
Sent from my ADR6400L using XDA App
charge ur batt. to 100%, then go into cwm and clear batt. stats, when u turn it back on it should b around 80-85% then charge all the way back full again and then u will b at full capacity
obriennathaniel said:
charge ur batt. to 100%, then go into cwm and clear batt. stats, when u turn it back on it should b around 80-85% then charge all the way back full again and then u will b at full capacity
Click to expand...
Click to collapse
is this all the time we have to do, I have the extended battery and it doesnt drop and I read about clearing the batterystats.bin but is this something we always have to do when we charge the phone? when I use the standard stock battery it drops with no problem
I didn't have any issues until I wiped the battery stats and now, my battery is constantly inconsistent. I would not recommend doing it as it has nothing but a pain in my arse since.
Have tried "bumping it" which essentially means to charge it to 100%, restart it, then charge it back again from whatever it dropped to.. Mine initially was around 85ish.. After a few "bumps" it crept up to 90 or 91 and then wouldn't go any higher. I charged it back to 100% and decided to follow the advice from another article which said to let it deplete to 0%.. In doing that, surprisingly it "froze" in a couple of places, I don't recall the 1st % but the 2nd % was definitely at the 28% mark. It literally sat there for a good 2+ hours with screen on max and didn't go down. Eventually it went down to 1% and I charged it back to 100%.
Issues still remain, wondering if I should've let it completely die out and force itself off?
Lesson: DO NOT MESS WITH BATTERY STATS with CW.
obriennathaniel said:
charge ur batt. to 100%, then go into cwm and clear batt. stats, when u turn it back on it should b around 80-85% then charge all the way back full again and then u will b at full capacity
Click to expand...
Click to collapse
Where do I get into CWM, to do this?
Thanks for your help everybody! I'm sorry if this is a dumb question...what is CWM? My device is stock.
CWM = Clockwork Mod.. Goto Market, download ROM manager, then you can flash CWM. Not sure if that'll do you any good if you're not rooted though.
why when I reboot my phone like 15% of the battery life drops I love this damn phone man...i cant put it down while im at work
The battery reading after reboot is wierd.
Yesterday I was at 51% and draining are at a pretty steady rate like normal. After rebooting, it showed 41% but then it say at 41% for AWHILE.. after like an hour, it read 40% and started discharging at the normal rate.
Your battery gauge is lying to you (and it's not such a bad thing)
Good Read
feedhead said:
Your battery gauge is lying to you (and it's not such a bad thing)
Good Read
Click to expand...
Click to collapse
Thanks for the repost, I had skimmed this thread earlier but don't recall it being so detailed. Seems like the moral of the story is that while "bump charging" works, it's not really recommended as it can reduce the overall life of the battery. Wonderful, now I regret ever messing with the battery stats at all, although I can't say for sure I didn't have this issue prior to doing so.
My OEM battery wouldn't hold a charge even after charging it all day... I took it to the VZ store and they replaced it for free...... I also just bought the larger 2750 mAh battery.... works great!
Last night I left the house with about 40% left on my battery. By the time I went home, my Sensation was completely drained. This was within 3 hours, which should not drain it to 0%, especially since it was asleep most of the time.
When I got home and I plugged it in, I booted it up and surprisingly, it booted up with 42%. Before plugging in it had no power left, and the phone wouldn't boot at all. I wiped my battery stats yesterday morning too, after charging it to 100% for a few hours.
Seems like my battery stats are VERY wrong right now, and I just wiped it again after charging it to 100% and leaving it there for a while. Does anyone else have this problem? I know some people are having random stats popping up here and there, but this still had 30% juice left before it just died out. Never happened before. I was able to nearly fully drain it just 3 days ago too (100-5%).
Charge to full, wipe again, and drain to about 5%. Charge full and repeat. It usually takes a few cycles to correct battery stats.
Sdobron said:
Charge to full, wipe again, and drain to about 5%. Charge full and repeat. It usually takes a few cycles to correct battery stats.
Click to expand...
Click to collapse
I'd also recommend this application from the market for battery calibration, although you need root.
ben_pyett said:
I'd also recommend this application from the market for battery calibration, although you need root.
Click to expand...
Click to collapse
Alright, thanks, I'll try that. Hopefully it gives me an accurate reading
I read a lot of thread about battery calibration so I want to know if someone try this on XT720 and if it's really usefull and not dangerous for the phone.
Thank you
It is useful and not dangerous at all. Your battery has, if stock that came with phone, a full charge of 4.2v.
So let's say that you have been conservatively using you phone most of the day and are at 70%. You decide to flash the Hellmonger edition or CM6 but you make a nandroid backup first. You flash them and it goes horribly wrong and your phone power dwindles down to 30% and you freakout and charge it back up.
When it is charging, you decide to hold off on flashing for a bit and want to go back to your "home" ROM, whatever that may be. You let your phone charge up to 100% and re-flash your back up. Once it reboots and settles down, you happen to notice that just 5 mins ago you were at 100%, but now after flashing your backup, your battery shows 70%.
30% drop in 5 mins is rediculous. Yes it is, bit it didn't really drop 30% in 5 mins because when you backed up your original ROM, you also backed up your data/system/batterystats.bin that was calibrated to 70%.
If you use Battery Calibrator and charge it up fully, run app, hit it and then unplug, it deletes the data/system/batterystats.bin and in a few seconds (5 ithink) it creates a new one with you proper charge and voltz.
So if you flash a lot, this is good for you. Or you can delete the batterystats.bin manually if you want, but there's an app for that.
Woodrube said:
It is useful and not dangerous at all. Your battery has, if stock that came with phone, a full charge of 4.2v.
So let's say that you have been conservatively using you phone most of the day and are at 70%. You decide to flash the Hellmonger edition or CM6 but you make a nandroid backup first. You flash them and it goes horribly wrong and your phone power dwindles down to 30% and you freakout and charge it back up.
When it is charging, you decide to hold off on flashing for a bit and want to go back to your "home" ROM, whatever that may be. You let your phone charge up to 100% and re-flash your back up. Once it reboots and settles down, you happen to notice that just 5 mins ago you were at 100%, but now after flashing your backup, your battery shows 70%.
30% drop in 5 mins is rediculous. Yes it is, bit it didn't really drop 30% in 5 mins because when you backed up your original ROM, you also backed up your data/system/batterystats.bin that was calibrated to 70%.
If you use Battery Calibrator and charge it up fully, run app, hit it and then unplug, it deletes the data/system/batterystats.bin and in a few seconds (5 ithink) it creates a new one with you proper charge and voltz.
So if you flash a lot, this is good for you. Or you can delete the batterystats.bin manually if you want, but there's an app for that.
Click to expand...
Click to collapse
So, if I understand, it's not so usefull because after I lose my 30%, if I charge and I have 100% it's really 100% not 70% right ?
I would say that it is always best to start from a clean slate. It deletes that batstat file and starts anew. Can't hurt, but if you are flashing ROMs every 3rd day like most of us, it does come in handy.
For the moral of the stroy, it will not damage your phone. Just a one click app that you can do manually with Root Explorer if you wanted to.
Woodrube said:
I would say that it is always best to start from a clean slate. It deletes that batstat file and starts anew. Can't hurt, but if you are flashing ROMs every 3rd day like most of us, it does come in handy.
For the moral of the stroy, it will not damage your phone. Just a one click app that you can do manually with Root Explorer if you wanted to.
Click to expand...
Click to collapse
Ok, thank you, I will use it when I will flash a new ROM.
Do you actually have to drain the battery fully after calibration?
Sent from my MilestoneXT720 using XDA App
eejin2 said:
Do you actually have to drain the battery fully after calibration?
Sent from my MilestoneXT720 using XDA App
Click to expand...
Click to collapse
Its recommended that the battery drain fully, and then be recharged without interruption. I guess thats to give android a full scale from full to empty, to help better report battery stats and consumption.
However for me full drain means 10-15%, its hurts the battery to be drained till the phone powers off.
sohrab.naushad said:
Its recommended that the battery drain fully, and then be recharged without interruption. I guess thats to give android a full scale from full to empty, to help better report battery stats and consumption.
However for me full drain means 10-15%, its hurts the battery to be drained till the phone powers off.
Click to expand...
Click to collapse
Haha battery calibration definatly helps the battery a lot but u suggest not draining battery fully??
androidlover123 said:
Haha battery calibration definatly helps the battery a lot but u suggest not draining battery fully??
Click to expand...
Click to collapse
I used to drain it fully till my phone turned off before calibration but I read a very detailed article about how draining the battery completely can hurt it. So I choose to drain it till 5-10% which is good enough
How come sometimes when the battery is full it shows 4200mah like it should but sometimes it shows less like around 4165mah in the battery calibration app? At 4165, I still left it there to charge to see if it would increase or not but it didn't...
Sent from my MilestoneXT720 using XDA App
I know that the last little bit of charge just trickles in and takes a long time. If mine is at somewhere between 4150 and 4200, i call it good and go from there. If it was showing at say 4095 and 100%, then there might be something wrong with either the data or the battery. If you are sitting at 4165, then it is charged for the most part.
The app and what it does is more for when you are flashing a ROM and have around 60% and then once booted up fully, you charge it up to 100%. Decided you don't like your ROM and go back to your original ROM via backup, it will show 60% instead of the 100 or 90% you had before you went back to back up b/c you backed up the batstat bin when you nandroided your original ROM.
How about this:
ROM: Epicsteelblue 70% (and you made a backup) Then went to CM6, charged and hit calibrate battery at 100%. Used CM6 for a few hours and decided it wasn't your bag. Your batter is at 50%. You flash back to your Epicbluesteel ROM and you know for a fact you had 50% before you flashed back, but now once totally booted, you are showing 70%. This is why you use the battery calibrator after you flash a ROM. Gotta create a new batstat bin for you "fresh" ROM (even though it is a backup).
Hope this helps explain better.
eejin2 said:
How come sometimes when the battery is full it shows 4200mah like it should but sometimes it shows less like around 4165mah in the battery calibration app? At 4165, I still left it there to charge to see if it would increase or not but it didn't...
Sent from my MilestoneXT720 using XDA App
Click to expand...
Click to collapse
That happens sometimes to me aswell. The battery calibration app shows the battery full at 4165 or somewhere in that range. What I do with that is bump charge it. So if battery calibration shows 4165, i just calibrate it and turn the phone off while it is connected to the charger. When it turns off the charging screen appears and shows 100%, i leave it there for an hour or two. Then remove and turn the phone on. If you go into the battery information itll show the charge to be 4200 or close to that. Hope that was helpful you can try it next time.
EDIT: The reason I turn the phone off and let is charge is that when it reboots after fully charging to 4200 it can create a fresh battery stats. Remember battery stats are only rebuilt upon boot. If you calibrate your battery and then dont reboot its useless. To test calibrate it, and then use it for awhile and then try to recalibrate it the app will indicate that there are no battery stats avaible to delete. This is because the ROM has not made any new battery stats and will only make them on boot.
hey guys has anyone tried this method (http://forum.xda-developers.com/showpost.php?p=11803458&postcount=10) of calibrating battery? it seems the dev says that if u use his method, you can calibrate without downtime!!
wow this is damn cool. but its kinda complicated. the old way feels better for me i think...
Battery Updates
The battery updates every 10%, is there any way to make it update more precisely, like every 5%?
I've never been able to get anything better that 10% battery increments
Okay thanks maybe in a future rom this would be nice.
Hi
Is their a way to change from 10% to 1% increameants.
Sent from my XT720 using xda premium
eejin2 said:
How come sometimes when the battery is full it shows 4200mah like it should but sometimes it shows less like around 4165mah in the battery calibration app? At 4165, I still left it there to charge to see if it would increase or not but it didn't...
Sent from my MilestoneXT720 using XDA App
Click to expand...
Click to collapse
It is the property of all rechargetable battery, 4.2V can only see at the moment charging progress just finished. when the power management IC pull of charge current, battery's voltage will drop a litte in a very short time, like you said, 4.165V for example. And, because of your charger is connected, battery will not drain, It won't be another charging progress witch you are expecting.
I know I'm digging up an old thread here, so sorry for that. I've recently tried a few other ROMs, but since have come back to CM6.3.7. I always do the battery calibration thing when I flash ROMs and each time I've tried it lately, it gives me odd information in the Battery Usage screen. I charged my phone to 100% yesterday before leaving work and when I got to work today, it showed 70%, which seemed normal, but the Battery Usage screen showed "1h 24m since last unplugged" and I know I hadn't plugged it into the wall or USB for about 12 hours. I did restart once....could that be the reason why the time since last unplugged is incorrect?