Hello,
WiFi doesn't work with my HTC HD2 under SD AmericanAndroid Version 2.3.5.
It takes a long time until the wireless switcher is turned on and after a few seconds the switcher goes automatically to "off". Bluetooth works normal.
In Windows Mobile there's no problem - both Bluetooth and WiFi are fine.
I've tested severall versions of Android (SD and NAND), tried SD card reformatting- always the same effect, no WiFi under Android.
I've already tried hardware and software reset - also without problem solution.
Any ideas?
Hi,
no idea, but I tried out this (AmericanAndroid) during last weeks on a HD2 and everything was working fine, even WiFi (SD Build):
http://forum.xda-developers.com/showthread.php?t=957652
BR
Rainer
Related
I'm having one major problem that I've been unable to solve. Every so often the bluetooth stops working and the sound locks giving error=2. Bluetooth reports "failed to turn on due to insufficient memory". If I try to increase the volume it goes back to 0. The only solution is a full hardware reset. It's happens so often I've transferred all the cab's onto a separate sd card so I can reinstall the lot without a PC.
I have a feeling it is USB related as it seems when it's stuck into a port it can on occasion initiate the problem.
The only way I've managed to sort the issue was by upgrading the bluetooth to a newer version (broadcomm_bt_stack.CAB 1.7.6) via a hack found on one of this forum, however while the sound then works the bluetooth is off completely probably because registry settings are using the wrong port etc.
Here's a list of the PDA spec:
OS: 5.01, 20061016
ROM: 1.10.15
Firm: 3.0
Bootloader: v2.17
Bluetooth: Broadcom 1.7.1 Build 8700
I have attached the bluetooth registry values (before I try to update the stack).
Any ideas???
hi
i´ve got a problem
have a touch pro with winmo 6.5
downloaded xdandroid 2.2.1 frx03 (but tried to resolve the problem with changing to frx04, too).
first - xdandroid works great. very nice and smooth
but - i only loaded it because it´s not possible to connect a android tablet with a winmo hotspot (because winmo only can provide ad-hoc as spot and android is unable to connect to ad-hoc)
so i read that it should work with the android hotspot...
so far so good.
but wifi doesn´t work on my touch pro.
i tried different things -
startet the haret.exe with enabled wifi (it works great on winmo),
startet haret.exe with disabled wifi
tried the frx03, the frx04
everytime i try to enable wifi in xdandroid it says fail
unable to connect to my home-wlan
and unable to scan for wlan because alsways a fail during the try to enable
I hope there is a resolution for this problem or am i just one of those f***** people where wifi under android didn´t work'?
HTC Touch Pro here as well.
Installed 2.2.1 FRX03.21 and no wifi for me either. I just got installed yesterday. First I have tried Xandroid in about 9 months. Was hoping it would work slick,out of the box. I 'm sure someone will come up with a patch to get wifi working. Oh, by the way, camera would not work either I am guessing gps may not either?
I wanted to add, I do see a couple 'light bars' on the wifi icon that comes and goes a little, like android does see the access point.
Barry
Using FRX04 with the latest kernel package from the Autobuild site and rootfs on my Fuze/RAPH110 and am staring at 5 wifi spots...
Not sure why you are experiencing those issues, have you tried to start over from scratch with FRX04 yet?
Please leave some feedback HERE
Autobuild site link: CLICK HERE
n-Joie! (Enjoy)
Hi,
When I decided to buy my TF300T one of the most import point was I could use internet over bluetooth since this version doesn't have 3G.
When I was on ICS I used to connect without any kind of problem .. just pair and use, simple like that.
But since I upgrade to Jelly Bean everytime I try to pair my Tablet to my cell phone the tablet abruptly reboot.
I tried everything I could think of to solve the issue:
- I did the new update to V10.4.2.13 of JB
- I removed the profile and added a new one
- I tried with another cellphone (mine is a Nokia Symbian, tried and galaxy II, same error)
- Wipe system/data
- Disabled wifi .. development mode .. usb debugging ..
- Formated my cellphone
My cellphone does allow internet over bluetooth as I was used to connect thru it everyday. I still tested on my friend's tablet (still in ICS) and it worked fine. The problem started when I upgraded from ICS to JB on my TF300T.
Does anyone have any idea what to do to get it solved?
Thank you in advance.
Leo
I'm not sure what exactly happened but I've been pairing with my old Nexus through bluetooth for a while now with no problems, and suddenly I stopped being able to connect to it or any other device. I can turn on bluetooth, see devices, and even pair but when I press on a device name to connect it says "connected" for about half a second and then disconnects immediately. Thought it was the Nexus but I am unable to connect to any other devices.
I tried rebooting, un-pair and re-pair, clearing bluetooth cache/data, clearing dalvik, but nothing.
The weird thing is that this actually happened a while back, and when I turned off developer mode it started working again. But now that's not doing anything.
I saw that there are a few old threads about others with bluetooth problems. Has there been a fix for this?
I'm running RR on 6.0.1.
Thanks in advance!
I'm writing a cordova app that was starting bluetooth just fine until, without any known change, it suddenly just hangs and my gui just sits there like duh forever. note 4 android 6 cant root it so ive got the bloat and the upgrade cycle slooowdown
HI
I have a new PX6 Head Unit Android 9.
one problem is, that the WiFi disables itself after a short period.
Sometimes i click "enabel Wifi" and when it starts to activate - it gets deactivated already.
Sometimes it works for several Minutes and is then deactivated.
I have a WIFi USb Stick with gsm Card connected via USB like on my older PX5 Radio and thats no Problem.
So the Wifi is Always there,.. even "activate WiFi when known WiFi is near" doesn´t help,.. i tried several Things but Nothing seems to work…
the 2nd problem that i have is, i cant assume a sd Card as internalt Memory. no known SD Card works. ( i have several here and all worked on the px5 board )
when i go to the Memory menu and click on the gps Card,.. the filemanager Always crashes - Nothing helps. any ideas? the Cards are known and functioning ( Video MP3 etc... )
What did the reseller suggest or offer when contacted for support?