What kernel do I need? Tried to flash one earlier and ended up in boot loop and had to restore. Help is greatly appreciated
Sent from my ADR6400L using XDA App
Runn3rLogic said:
What kernel do I need? Tried to flash one earlier and ended up in boot loop and had to restore. Help is greatly appreciated
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
I've used both the latest from Imoseyon and Nerozehl. No issues at all.
Roll back your recovery to 3.0.2.5 and flash one of the above kernels
Sent from my Synergized BOLT VIA XDA app
"If i helped you please thank me"
I'm on the latest recovery and overclocked with Imoseyon's 3.8.0 lean kernel.
Sent from my BAMF'd THUNDERBOLT
CWR 5.0.2.1, BAMF Forever 1.0.6, imoseyon leanKernel 3.8.0-GBtest, no problems at all.
loonatik78 said:
I've used both the latest from Imoseyon and Nerozehl. No issues at all.
Click to expand...
Click to collapse
I was just going to post 10 posts tonight just so I could aske in a dev forum on here if nero's kernel works on bamf forever, question answered obviously thanks
Thanks Guys, officially running Imoseyon's leanKernel 3.8.0-GBtest and overclocked to 1.9 ghz!
Related
I would like to oc my g2x with the my stock rom please any suggestions or ideas
Sent from my LG-P999 using XDA App
the trinity kernel is the only one that will run on stock and i cant stand running it... all my phone does is lock up, have wake up wonkiness and force me to pull my battery 10 times a day...
JHaste said:
the trinity kernel is the only one that will run on stock and i cant stand running it... all my phone does is lock up, have wake up wonkiness and force me to pull my battery 10 times a day...
Click to expand...
Click to collapse
+1 Although not as much, maybe 1-2 times per day...but its soo good.
G2X
There's a lot of different Trinity kernels in the section they say cm7 eb none show stock
Sent from my LG-P999 using XDA App
Bspence415 said:
There's a lot of different Trinity kernels in the section they say cm7 eb none show stock
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
use the EB1.0.4 FR kernel... Eagles Blood is a modified stock rom so the trinity kernel will run on it...
That's the one I tried I can't get past the boot screen after i flashed through cwm recovery
Sent from my LG-P999 using XDA App
did u wipe cache n then go into advanced n wipe dalvik then flash???? i had that prob way back n have always did this method n it works
faux123 has just released a beta build of a Stock kernel.
http://forum.xda-developers.com/showthread.php?t=1102720
From the post:
faux123 said:
THIS IS ONLY FOR THOSE WHO ARE WILLING to BETA TEST THIS ON THEIR OWN PHONE... IF YOU ARE NOT COMFORTABLE WITH THIS YOU SHOULD NOT FLASH THIS.
Click to expand...
Click to collapse
I just got the Captivate yesterday and I'm in love with it. I've been modding my Backflip for a while and I'm fairly certain I know what I'm doing. I've been trying different ROMs and I've currently settled on a rooted stock 2.2 ROM.
I want to change my kernel though, so I put my phone in download mode and flashed the Galaxian kernel via Odin, it finished and then my phone started boot looping. So I one clicked it and tried again with SGS flasher, boot loop. One click restored, tried with CWM, boot loop.
I've also tried Talon, Speedmod, Setiron and a stock kernel with all 3 methods. Nothing will flash without boot looping.
That kernel is designed for reoriented i-9000 roms
Sent from my SAMSUNG-SGH-I897 using XDA App
What about all of the other ones that were supposedly for 2.2 ROMs?
AbaddonVH said:
What about all of the other ones that were supposedly for 2.2 ROMs?
Click to expand...
Click to collapse
It needs to be a true captivate 2.2 kernel a lot are i9000's you just need to read the op for whichever kernel you are looking at thoroughly. 90% of the time the dev states if its an i9000 kernel.
The speed mod kernel here, forum.xda-developers.com/showthread.php?t=893880 SHOULD work just make sure to wipe cache and dalvik cache in recovery after install and it should boot.
Sent from my I897 w/Antares Darkcloud, Red Nebula kernel, & 1.3Ghz OC using Tegrak.
You will have to read the description in the first post on the kernel you want to install, and the kernel you were installing was a gingerbread kernel
Sent from my SAMSUNG-SGH-I897 using XDA App
holeindalip said:
You will have to read the description in the first post on the kernel you want to install, and the kernel you were installing was a gingerbread kernel
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Yeah. You were trying to install a gingerbread kernel on a froyo ROM. That won't work.
Thanks guys! I think I downloaded the wrong version of SpeedMod the first time, it worked this time. Firstly I didn't know that the difference between i-9000 and i897 meant that much. Secondly, I'm not really sure how to read the kernel topics, they're confusing to say the least :S.
I'll learn sooner or later but thanks for your help everyone.
AbaddonVH said:
Thanks guys! I think I downloaded the wrong version of SpeedMod the first time, it worked this time. Firstly I didn't know that the difference between i-9000 and i897 meant that much. Secondly, I'm not really sure how to read the kernel topics, they're confusing to say the least :S.
I'll learn sooner or later but thanks for your help everyone.
Click to expand...
Click to collapse
Yeah some are very confusing the biggest help Is to learn the difference in firmware revision codes. Most captivate roms/kernels begin with k. like kh3, kf1 that sort of thing and from what I remember j is for I9000 eg jv1 etc...
Sent from my I897 w/Antares Darkcloud, Red Nebula kernel, & 1.3Ghz OC using Tegrak.
Is anyone using a different kernel with the new v21y baseband?
Faux's 14b 2.
buru898 said:
Faux's 14b 2.
Click to expand...
Click to collapse
14b2? I'm familiar with the g2x prior to baseband update but I've never seen that one...link?
Sent from my LG-P999 using XDA
Check on rootz, second to last post.
Sent from my LG-P999 using Tapatalk
Faux all the way.
http://forum.xda-developers.com/showthread.php?p=25924733
Sent from my LG-P999 using xda premium
I'm using the 14b2 faux123 kernel with v21y. It's a lot better than the stock kernel.
Sent from my LG-P999 using XDA
how's the battery life i don't want to loose my 3hrs screen on time using akop and faux
Sent from my LG-P999 using XDA
Sk8trfred said:
how's the battery life i don't want to loose my 3hrs screen on time using akop and faux
Sent from my LG-P999 using XDA
Click to expand...
Click to collapse
There you go.
Sent from my LG-P999
buru898 said:
Faux's 14b 2.
Click to expand...
Click to collapse
I'm using this kernel as well. I can confirm that it's much smoother and quicker than the stock kernel.
Sent from my Motorola StarTAC
andrewNY said:
I'm using this kernel as well. I can confirm that it's much smoother and quicker than the stock kernel.
Sent from my Motorola StarTAC
Click to expand...
Click to collapse
What about battery life?
Sent from my LG-P920 using XDA
cricketAC said:
There you go.
Sent from my LG-P999
Click to expand...
Click to collapse
Switch to a different browser if want to save more battery
Sent from my LG-P999 using xda premium
I the 014b2 kernel working with rc3? I can't get to load past the boot animation.
aaCotyaa said:
I the 014b2 kernel working with rc3? I can't get to load past the boot animation.
Click to expand...
Click to collapse
There are two threads/ variations of faux kernels. One is for GB like this one and the other is for cm7 based. Use the other kernel 050b1 i think.
cricketAC said:
There are two threads/ variations of faux kernels. One is for GB like this one and the other is for cm7 based. Use the other kernel 050b1 i think.
Click to expand...
Click to collapse
That one works with the new bb?
aaCotyaa said:
That one works with the new bb?
Click to expand...
Click to collapse
I dont think so cuz at that time cm7 wouldnt work with new BBz, dunnno if he patched it up(his kernel) later on.
cricketAC said:
I dont think so cuz at that time cm7 wouldnt work with new BBz, dunnno if he patched it up(his kernel) later on.
Click to expand...
Click to collapse
Just looked into it. Apparently 050 is for Rc2 only.
---------- Post added 2nd June 2012 at 12:06 AM ---------- Previous post was 1st June 2012 at 11:49 PM ----------
OK, I got it working. I flashed my old favorite Trinity kernel. I really didn't expect it to work, but apparently it does.
The Eaglesblood ICS release 3 came with Trinity Kernel and had UMS support They just updated to Supporting the V21Y baseband. going to try Harsh and see what happens
jimmydafink said:
The Eaglesblood ICS release 3 came with Trinity Kernel and had UMS support They just updated to Supporting the V21Y baseband. going to try Harsh and see what happens
Click to expand...
Click to collapse
That would explain it then lol
I running T15-G2x-06022012 with CM7 RC3 OCed to 1400 with out issues
For Faux's 014b2 kernel, which do you recommend when running Kwes' modified stock ROM (v21y)? I see pre-UV and stock voltage versions. I'm leaning towards stock voltage, but is there a major advantage for the pre-UV? (I'm not even really sure what is meant by pre-UV -- pre-under voltage?)
Thanks!
EDIT: pre-UV is pre-under volted. From a little more reading, I found that pre-UV means the kernel has a -50mv UV already. So if using UV/OC tools and apps, you need to take into account that -50mv already.
http://forum.xda-developers.com/showpost.php?p=14887835&postcount=262
Hopefully this explanation helps anyone else with a similar question.
Hello,
I have read about kernel for a while.
The phone I have is Verizon Samsung Galaxy s3 I535 with Darkhorse them SynergyRom 1.7 installed. I do not install Kernel yet. I read lot of forums and quite not sure which kernel to install into SynergyRom 1.7. Don't want to have kernel mixed up causing bricks. Have Nandroid backup two back up one on phone and one on pc. I have read this Kernel requires busybox and ez recovery?
I await your reply.
Thanks in advanced!
LeonKnight12 said:
Hello,
I have read about kernel for a while.
The phone I have is Verizon Samsung Galaxy s3 I535 with Darkhorse them SynergyRom 1.7 installed. I do not install Kernel yet. I read lot of forums and quite not sure which kernel to install into SynergyRom 1.7. Don't want to have kernel mixed up causing bricks. Have Nandroid backup two back up one on phone and one on pc. I have read this Kernel requires busybox and ez recovery?
I await your reply.
Thanks in advanced!
Click to expand...
Click to collapse
I am using Imoseyon BETA leanKernel on Synergy 1.7. Use EZ Recovery to flash CWM 6.0.1.0. You do need to have Busybox installed. Let us know how it goes!
Your phone will look like it's turning on 2x every time you turn it on/reboot. I believe this is just kexec doing its thing.
rpenkar said:
I am using Imoseyon BETA leanKernel on Synergy 1.7. Use EZ Recovery to flash CWM 6.0.1.0. You do need to have Busybox installed. Let us know how it goes!
Your phone will look like it's turning on 2x every time you turn it on/reboot. I believe this is just kexec doing its thing.
Click to expand...
Click to collapse
Yes it will boot twice it appears like a boot loop but its really kexec doing its thing...I personally use inviableks kernel...can be installed with ez recovery
Sent from my SCH-I535 using xda premium
trafalger888 said:
Yes it will boot twice it appears like a boot loop but its really kexec doing its thing...I personally use inviableks kernel...can be installed with ez recovery
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
The last time I used invisibleks v2 it did not auto reboot? You had to reflash on each boot in recovery..has it since been updated?
droidstyle said:
The last time I used invisibleks v2 it did not auto reboot? You had to reflash on each boot in recovery..has it since been updated?
Click to expand...
Click to collapse
I have not had any problems with needing to reflash it I always just reboot recovery and it loads the kernel but does not go into an actual recovery since it is hybrid
Sent from my SCH-I535 using xda premium
Works as charm! Was scared first but it went well! If I want to install different rom will have to flash stock kernel before flashing different roms?
Thanks!
LeonKnight12 said:
Works as charm! Was scared first but it went well! If I want to install different rom will have to flash stock kernel before flashing different roms?
Thanks!
Click to expand...
Click to collapse
Nope! When I flash new versions of Synergy my kernel goes back to stock. Just remember if you chose Imoseyon's kernel from my link above that it is only for TouchWiz roms.
He has posted an AOSP version over on rootz as well.
rpenkar said:
I am using Imoseyon BETA leanKernel on Synergy 1.7. Use EZ Recovery to flash CWM 6.0.1.0. You do need to have Busybox installed. Let us know how it goes!
Your phone will look like it's turning on 2x every time you turn it on/reboot. I believe this is just kexec doing its thing.
Click to expand...
Click to collapse
+1 I flashed this kernal last night and so far have seen a huge improvement in battery life (not that it was bad in the first place). Overall it seems snappier as well.
Douchie0221 said:
+1 I flashed this kernal last night and so far have seen a huge improvement in battery life (not that it was bad in the first place). Overall it seems snappier as well.
Click to expand...
Click to collapse
I may give this kernel another look....just curious what min/max and governor are you using
Sent from my SCH-I535 using xda premium
Can I flash the Infusion Kernel 1.8 onto Emancipation A: 1? For all intensive purposes I'm asking if the kernel can be flashed onto any rom.
I don't want to ask a stupid or noob question but, I haven't been able to find my answer anywhere. When I first started the rooting/flashing a rom process I was gonna go with Zeus Z-TR which I believe has voltage control built into it. After a bit of reading I settled on Emancipation but, I still wanna be able 2 OC/UV.
Also, I'm wondering about the beats audio that is built into the Z-TR rom. Is that because it comes with 1.8 kernel?
So, if someone can answer that question I would really appreciate it a lot.
I'd just flash the new synthesis kernel and as long as you're on gingerbread, you can flash another GB kernel you wish
Sent from my SGH-I997 using xda app-developers app
TikeKiller889 said:
Can I flash the Infusion Kernel 1.8 onto Emancipation A: 1? For all intensive purposes I'm asking if the kernel can be flashed onto any rom.
Click to expand...
Click to collapse
I'm thinking Infusion is Froyo and Emancipation is GB. If those facts are correct, then NO, you can not
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
Thanks for the answers. After looking into it some more its safe to say I'm stuck without OC/UV since its GB.
If youre on gb, flash the synthesis kernel. Its oc/uv with working mhl on gb.
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
I'll not familiar with synthesis.....must be new within the last year.
There are several kennels named infusion. The one you (op) mentioned was Froyo.
But developer/member Zen has two GB kernels named Infusion that allow overclock...Zen's Infusion A and Zen's Infusion B. 1600 for A and 1400 for B
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
Here is synthesis. http://forum.xda-developers.com/showthread.php?t=1638138
Sent from my SAMSUNG-SGH-I997 using xda app-developers app