Hi everyone.
I found in local second hand shop with electronic devices one really nice p6800 tab. It wont boot (only to samsung 7.7 tab sign) and after reading troubles with emmc brick I am afraid buying it.
Is there any fast possibility to check if it is this case of problem? I am able to connect it for about 5 mins to my win 7 laptop before buying.
Thank you very much in advance.
( my first idea was to reboot it in download mode, connect with odin and try to flash without pit and repart any hc or ics official rom and wait for booting , but I think there is any better way to get it faster )
I had the same boot logo stuck as you mention..
And the 'bricked' guide, the concensus says that when you reach that point,
the next step is to boot into D/L and install via Odin Original HC (Like you suspected)
That's it.... no other way from what I have experienced..
You could do that at the re-sale shop with your laptop.. it should take about 5 minutes..and you could be good to go...
Let's say that you do that at the pawn shop...
And you get a "PASS" with Odin....
AND you STILL get the logo bootloop......
then you have to go the full route as described in that first post...(if you buy it)
good luck....
Thanks for reply!
I`ve met former owner today and we discussed about this issue and he told me that it IS emmc bricked. And these scums in re-sale shop know it and trying to sell it like with some minority issue.
Even that 7.7 looks like really nice device I rather buy Nexus 7 for descent price..
Thanks for your help and good luck in future flashing ^^
[you can close this topic]
hey there
i have done some serious trouble with my tf101... the main problem existed when i did a super wipe by flashing a zip names named super wipe for Revolution HD Rom... At this point the tablet only booted until asus and nvidia tegra logo appeared, afer that i tried nvflash and easy flasher and unfortunately both did not work... but would like to note that at first i was able to get into apx mode but now the tablet is not even charghing or turning on ! Please any advice would be much much appreciated..
OK now I fixed it with easy flasher tool... its so great i am so happy ive been working like 6 complete hours to fix it !!
Just flashed the stock rom and everything fine
Many thanks to the great devs out here
I have a polaroid tablet with model polaroid MID1047.
Its been barely 3 months since I purchased it in France but now am in Ghana. I was using the polaroid tablet and the screen went off.
I tried to put it on and it goes through the process of booting but it just cant go to the home screen where I can touch icons and use the device.
in order words, it hangs and never boots to home screen and when it even boots to the home screen it is not useable, and the tablet remains non-responsive.
THE SPECIFICATIONS ARE BELOW FOR THE MODEL OF POLAROID TABLET I HAVE:
10.1" Tablet
Touch panel 10.1"
Multi points capacitive
Android 4.1
CPU:ATM7029 QUADCORE 1.2Ghz
Resolution: 1024 x 600
Storage: 16GB Nand flash
RAM: 1 GB DDR III
Micro Card Reader Max 32GB
Micro USB Port + OTG
Dual Digital Camera 2MP/0.3MP
WIFI 802.11b/g/n
Bluetooth
HDMI
Battery Li-ion 5000mAh
I have tried several approaches such as
1. discharging the tablet completely, charge and trying to power on.. this approach did not work.
2. I entered rom(by holding the volume up, inserting the usb cable and pressing the power button 3 times) and selected factory reset. it didnt work
3. i entered rom again and tried wipe cache and it didnt work also.
I went to polaroid support and they said the device is not on their support list and possibly not from them.
am so much confused now and any help or suggestions are very much welcome. Thanks in advance
flash the stockrom
iwjosi said:
flash the stockrom
Click to expand...
Click to collapse
there is no rom on the website that seems to be compatible with the model i have. are there general roms that could fit?
ask someone for rom dump
jime1 said:
ask someone for rom dump
Click to expand...
Click to collapse
If i could get any help, Jime, i woould go on and take it. I only know xda. I am ready to try anything. If you could help me with one, i would be very grateful. thank you.
owusupisco said:
If i could get any help, Jime, i woould go on and take it. I only know xda. I am ready to try anything. If you could help me with one, i would be very grateful. thank you.
Click to expand...
Click to collapse
WAIT!! Polaroid support said its not from them!!??? what does that mean! thats confusing ..is it an original genuine device bro..?? make it sure..
---------- Post added at 09:12 PM ---------- Previous post was at 09:09 PM ----------
owusupisco said:
If i could get any help, Jime, i woould go on and take it. I only know xda. I am ready to try anything. If you could help me with one, i would be very grateful. thank you.
Click to expand...
Click to collapse
Have you tried this link
http://southerntelecom.com/polaroidsupport/firmware_guide.html
Good day all on XDA,
Im having a bit of a problem wth my tablet,
I recently bought two of the same chinese tablets,
They are the softwinner V11, based on the A33 allwinner chipset.
One of the two had an issue, so i tried to clone the rom,
but along the way something went wrong and now i cant go past the first logo.
I tried to get in recovery mode, i tried every possible button combination i could think of,
but it did not work.
Now the weird thing is, before i could push and pull files with ADB, so my drivers worked.
But now it does connect, but the device is recognized as USB Developer when its connected.
And when i use the driver it says it is working fine, but ADB doesnt recognise it.
And when i connect my tablet holding the volume up button, and pressing the power button repeatetly,
it also connects, but as an unknown devices. And the screen stays black.
In both cases the drivers that used to work (and work on the other) wont work.
I dont want to give up, and since there seems to be life in these tablets, im hoping someone here could help me, and knows something i cant think off.
Thanks in advance,
Robbie
Did you get them fixed, I fixed mine (all winner v11 10.1" tablet) by burning an image for the device to an SD card then inserting it into tablet which automatically installs when powered on. It runs better than before, cameras don't work but can be fixed after.
rock6963 said:
Did you get them fixed, I fixed mine (all winner v11 10.1" tablet) by burning an image for the device to an SD card then inserting it into tablet which automatically installs when powered on. It runs better than before, cameras don't work but can be fixed after.
Click to expand...
Click to collapse
Hi,can You send me a link about this firmware? My touchpad won't work after flashing,and I don't find the right firmware yet. Thanx!
nettudky said:
Hi,can You send me a link about this firmware? My touchpad won't work after flashing,and I don't find the right firmware yet. Thanx!
Click to expand...
Click to collapse
I have sent you a private message
Where to get firmware to this device? Astar-y3 v11 i search everywhere
rock6963 said:
I have sent you a private message
Click to expand...
Click to collapse
Mine is Astar-y3 v11 10.1 the board is GA10H_V1.1 20141110
I been search for the firmware everywhere without any luck
This rom will works fine for your tablet , http://www.filefactory.com/file/15k...X0233_DBL2855_ESP8089_GSL3675_HD_20150206.rar
Flash (iso) file for Softwinner V11 A33
Hy,
I am looking for flash possibilities, because I deleted settings app from my Softwinner V11 chinese tablet, and it stays at first logo.
Android Build: astar_y3_eng 4.4.2 KVT49L 20150403 test-keys
Vendor: sun8i
SDK version: 19
Thanks in advance
Attila
all winner v11 10.1" tablet
rock6963 said:
Did you get them fixed, I fixed mine (all winner v11 10.1" tablet) by burning an image for the device to an SD card then inserting it into tablet which automatically installs when powered on. It runs better than before, cameras don't work but can be fixed after.
Click to expand...
Click to collapse
I deleted "settings" app-s supposed to be viruses and now the boot process stops at All winner logo.
Could you send image or any info how to flash my tablet?
akapusy said:
I deleted "settings" app-s supposed to be viruses and now the boot process stops at All winner logo.
Could you send image or any info how to flash my tablet?
Click to expand...
Click to collapse
i'll send a PM with links, asap
nettudky said:
Hi,can You send me a link about this firmware? My touchpad won't work after flashing,and I don't find the right firmware yet. Thanx!
Click to expand...
Click to collapse
rock6963 said:
i'll send a PM with links, asap
Click to expand...
Click to collapse
What about gps ? Tablet : softwinner 717
rock6963 said:
i'll send a PM with links, asap
Click to expand...
Click to collapse
Hey, I got 2 similar tablets for my kids - both are plagued with malware that won't go away on factory resets - du speed booster, du battery meter, 'facebook' popups on bottom right corner (kids don't have FB).....
The tablet seems to be rooted, and there's a recovery already in place.
Could someone kindly give me a malware-free ROM to flash please ? Any maybe indicate how to go about it ?
Basic info should be fine - I've rooted and custom rommed a number of devices....
thanks a bunch!
David
Hi would anyone happen to have the links to this firmware s my astar-y3 10.1 tablets giving me trouble?
Cheers
digitiser dont work now
gewoonrobbie said:
Good day all on XDA,
Im having a bit of a problem wth my tablet,
I recently bought two of the same chinese tablets,
They are the softwinner V11, based on the A33 allwinner chipset.
One of the two had an issue, so i tried to clone the rom,
but along the way something went wrong and now i cant go past the first logo.
I tried to get in recovery mode, i tried every possible button combination i could think of,
but it did not work.
Now the weird thing is, before i could push and pull files with ADB, so my drivers worked.
But now it does connect, but the device is recognized as USB Developer when its connected.
And when i use the driver it says it is working fine, but ADB doesnt recognise it.
And when i connect my tablet holding the volume up button, and pressing the power button repeatetly,
it also connects, but as an unknown devices. And the screen stays black.
In both cases the drivers that used to work (and work on the other) wont work.
I dont want to give up, and since there seems to be life in these tablets, im hoping someone here could help me, and knows something i cant think off.
Thanks in advance,
Robbie
Click to expand...
Click to collapse
my digitiser does not respond at all
I can see that you have been bombarded.
Sorry that so many people are looking to you for a33 flash files and i am additionally sorry for adding to it. My a33-10ql-v1.1 flash file seems to be the "Bigfoot" of flash files. I cannot, for the life of me, find the file. I have been searching, relenlessly, since December last year. Im not usually one to stack on a full pile but i sure could use the help. If you could bring youself to find the time i would be forever greatful. Thank you, whether you can or cannot. Have a great evening.
A few days ago I rooted my phone, using ADB commands it let me but into bootloader but my phone didn't show the option to boot into recovery. It turned out i had to use another usb-c cable and then it did
help, i flash the wrong rom in my canvas knight 2 and now my phone is hard bricked , screen is totally black now , nothing happens by pressing power key or volume key, doesn't show anything when put it on charging if someone knows how to unbrick it plz help me
Midnight_Gamer said:
help, i flash the wrong rom in my canvas knight 2 and now my phone is hard bricked , screen is totally black now , nothing happens by pressing power key or volume key, doesn't show anything when put it on charging if someone knows how to unbrick it plz help me
Click to expand...
Click to collapse
No, it's dead, replace the motherboard, return the device if it's under warranty or get a new device.
For future reference.
When flashing a device, make sure you are flashing something built specifically for the device you are flashing.
Do not get impatient and flash a ROM from another similar device just because you want something different than what you have but can't find anything for the device you have.
Android is built specifically for the hardware it is installed on(it must be the same for all of the devices hardware, not just the same CPU).
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
so theres no way to get it back?
so theres no way to get it back?
nishkarsh3696 said:
so theres no way to get it back?
Click to expand...
Click to collapse
If it won't charge and won't respond, you can't fix it. Replace the motherboard or get a new device.
Those are your only options.
And stop flashing your phones unless you know EXACTLY what the device can use and only if you know exactly what you're doing.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE