help, i flash the wrong rom in my canvas knight 2 and now my phone is hard bricked , screen is totally black now , nothing happens by pressing power key or volume key, doesn't show anything when put it on charging if someone knows how to unbrick it plz help me
Midnight_Gamer said:
help, i flash the wrong rom in my canvas knight 2 and now my phone is hard bricked , screen is totally black now , nothing happens by pressing power key or volume key, doesn't show anything when put it on charging if someone knows how to unbrick it plz help me
Click to expand...
Click to collapse
No, it's dead, replace the motherboard, return the device if it's under warranty or get a new device.
For future reference.
When flashing a device, make sure you are flashing something built specifically for the device you are flashing.
Do not get impatient and flash a ROM from another similar device just because you want something different than what you have but can't find anything for the device you have.
Android is built specifically for the hardware it is installed on(it must be the same for all of the devices hardware, not just the same CPU).
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
so theres no way to get it back?
so theres no way to get it back?
nishkarsh3696 said:
so theres no way to get it back?
Click to expand...
Click to collapse
If it won't charge and won't respond, you can't fix it. Replace the motherboard or get a new device.
Those are your only options.
And stop flashing your phones unless you know EXACTLY what the device can use and only if you know exactly what you're doing.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Related
I was trying to port Android on Samsung Wave 525, So I got into Download mode then I just used the BOOTFILES and fota, but nothing happened, I just got some error (Didn't notice :crying: ) after that I just removed the battery and reinserted it and now its not even switching on. Its completely dead, I can't even get into Download mode too :crying:
Please some one help me :crying:
Please ignore if I had posted in wrong section, I'm completely confused, I really don't know what to do :crying:
No Body ?
spkpravee said:
I was trying to port Android on Samsung Wave 525, So I got into Download mode then I just used the BOOTFILES and fota, but nothing happened, I just got some error (Didn't notice :crying: ) after that I just removed the battery and reinserted it and now its not even switching on. Its completely dead, I can't even get into Download mode too :crying:
Please some one help me :crying:
Please ignore if I had posted in wrong section, I'm completely confused, I really don't know what to do :crying:
Click to expand...
Click to collapse
Nobody here to help me :crying:
spkpravee said:
Nobody here to help me :crying:
Click to expand...
Click to collapse
If your device is under warranty, go to a Samsung SC. Probably your ROM has gone bad. Basically it doesn't know what to do when you press the POWER button.
P.S.: No need of telling the SC guys about the android porting and all. Just tell them that your phone has gone dead and they will probably change your motherboard right away.
If your device's warranty has expired, then the MoBo charges will be around 2-3k (not sure though)
Re:
akshaylodhi said:
If your device is under warranty, go to a Samsung SC. Probably your ROM has gone bad. Basically it doesn't know what to do when you press the POWER button.
P.S.: No need of telling the SC guys about the android porting and all. Just tell them that your phone has gone dead and they will probably change your motherboard right away.
If your device's warranty has expired, then the MoBo charges will be around 2-3k (not sure though)
Click to expand...
Click to collapse
I don't have warranty for that mobile, Its old one.
I checked with Service center and they said, Mother Board is dead and want to replace it.
They said its around 2.7k.
Thanks for your reply
It also happened to me on my samsung wave two. all i did is i have remove the the battery and th mmc for an hour. After that i tried download mode and and it worked! hope this help give it a try.
you kill boot. You can restore the phone using JTAG or Riff BOX. they are in SC
master and mister who expert with android. please help me......
my sxl is hardbrick and totally death plese tell me what i can do to fix.....
egisetiyo said:
master and mister who expert with android. please help me......
my sxl is hardbrick and totally death plese tell me what i can do to fix.....
Click to expand...
Click to collapse
You need to provide full details what is happening. Does it switch on? Do you see a flicker when you turn on or what happened and every single bit of detail you think can be helpful. How do you know it's hardbrick. Do you know the difference between soft and hard brick?
Asking a question without details is not going to help. Ask again in details!
help
Hnk1 said:
You need to provide full details what is happening. Does it switch on? Do you see a flicker when you turn on or what happened and every single bit of detail you think can be helpful. How do you know it's hardbrick. Do you know the difference between soft and hard brick?
Asking a question without details is not going to help. Ask again in details!
Click to expand...
Click to collapse
my phone is off totally cant turn on when i push the button power. this hapen after i root my phone. when i charge my sxl, the light indictor is not turn on. sory with my bad english language master and please help me
anyone plese help me
Try Flashing firmware again using flashtool or SUS?
Try to remove the battery for about 10 minutes ,,it should fix the problem
master n mister, i had try all but the problem i cant acses my sxl when i want to flash with flashtool in pc. my sxl is not recgnze. that any trick who can fix this problem? plis share n help me
Do one thing.. Remove Battery, press power button for around 10-12 seconds.. Insert the battery and try to flash again using flashtool..
saurabh007 said:
Do one thing.. Remove Battery, press power button for around 10-12 seconds.. Insert the battery and try to flash again using flashtool..
Click to expand...
Click to collapse
thx u brother saurabh007, but the trick is still not succses. if i use usb jig are working sony?
once again thnx 4 u help i very apriciade
egisetiyo said:
thx u brother saurabh007, but the trick is still not succses. if i use usb jig are working sony?
once again thnx 4 u help i very apriciade
Click to expand...
Click to collapse
Are you sure that you got battery? Can you get same battery from some friend and try to power on your phone?
egisetiyo said:
my phone is off totally cant turn on when i push the button power. this hapen after i root my phone. when i charge my sxl, the light indictor is not turn on. sory with my bad english language master and please help me
Click to expand...
Click to collapse
egisetiyo said:
anyone plese help me
Click to expand...
Click to collapse
egisetiyo said:
master n mister, i had try all but the problem i cant acses my sxl when i want to flash with flashtool in pc. my sxl is not recgnze. that any trick who can fix this problem? plis share n help me
Click to expand...
Click to collapse
egisetiyo said:
thx u brother saurabh007, but the trick is still not succses. if i use usb jig are working sony?
once again thnx 4 u help i very apriciade
Click to expand...
Click to collapse
We can NOT help you until you provide specific details.
Answer these questions :
1.Do you have any idea about how to flash a ROM and how much experience & understanding you have of android?
2.What were you doing when your phone suddenly died?
3.Were you trying to change values of your ROM/kernel or trying to do a mod?
4.Tell me in details how your phone is behaving apart from your term DEAD. When you try to switch on, do you see flickering/ a dull black screen or nothing happens or do you see any slight light in dark.
5.Does it boot into flashmode/fastboot if you try?
6.Have you tried to charge it for few hours and left it there?
7.Are you sure it is NOT battery problem?
8. Did you drop it in any kind of liquid or anything.
9. What do you mean by root here. Your phone died DURING root, AFTER root or what?
I only asked 9 questions but your details must be equal to 20 questions if you are willing to fix your phone as we CAN NOT SHOOT STARS on a CLEAR SUNNY SKY.
siankatabg said:
Are you sure that you got battery? Can you get same battery from some friend and try to power on your phone?
Click to expand...
Click to collapse
yes off course. ok i will try brother
egisetiyo said:
yes off course. ok i will try brother
Click to expand...
Click to collapse
Can you just tell by which method did you root your device?
egisetiyo said:
master and mister who expert with android. please help me......
my sxl is hardbrick and totally death plese tell me what i can do to fix.....
Click to expand...
Click to collapse
just send the phone to the service centre,it is the easiest way
My Xperia L is not turning on
faizur1999 said:
just send the phone to the service centre,it is the easiest way
Click to expand...
Click to collapse
Thank you for the valuable details that have been provided. I am experiencing the same problem with my Xperia L. For Xperia L as per my understanding to get CWM you need custom Kernal and before installing this I was trying to root and unlock bootlader to get custom ROM installled. I am below average user had some experience in flashing and but I did something wrong the phone is totally dead now. Now I am trying to turn it on and go into recovery by using volume button and power button but just red light is blinking no Sony logo. I also try to connect this with PC but it recognized as unknown device. I also tried Sony SUS but PC is not recognizing the phone which I guess is required for SUS and flash tool. Please help me!
egisetiyo said:
yes off course. ok i will try brother
Click to expand...
Click to collapse
Is your sxl showing red led when you connect it to the charger..
If it showing the red led let it charge untill it turns green.
Then try to switch it on..
perivenkal said:
Thank you for the valuable details that have been provided. I am experiencing the same problem with my Xperia L. For Xperia L as per my understanding to get CWM you need custom Kernal and before installing this I was trying to root and unlock bootlader to get custom ROM installled. I am below average user had some experience in flashing and but I did something wrong the phone is totally dead now. Now I am trying to turn it on and go into recovery by using volume button and power button but just red light is blinking no Sony logo. I also try to connect this with PC but it recognized as unknown device. I also tried Sony SUS but PC is not recognizing the phone which I guess is required for SUS and flash tool. Please help me!
Click to expand...
Click to collapse
Try removing your battery for 5 minutes. Then try again and let us know how it goes. Your phone is not bricked, it can be salvaged, question is only if you need to send it in to repair. But first thing first, try removing battery and then come back.
Still Xperia L is not turning on, just giving three red light blinks
Redzo said:
Try removing your battery for 5 minutes. Then try again and let us know how it goes. Your phone is not bricked, it can be salvaged, question is only if you need to send it in to repair. But first thing first, try removing battery and then come back.
Click to expand...
Click to collapse
Thank you Redzo for your kind reply. I did the same but again the red light blinks three times but phone is not turning on and no Sony logo. Still it’s recognized as unknown device by the PC and just also tried on other pc but no luck. Got generic ftt to flash but the phone is still not being recognized by Sony flasher and SUS. Here in Pakistan there is no Sony service centres and I don’t want to give to local vendors. Please advise what should I do more
saurabh007 said:
Do one thing.. Remove Battery, press power button for around 10-12 seconds.. Insert the battery and try to flash again using flashtool..
Click to expand...
Click to collapse
Many many thanks to you Saurabh007.. I thought I've lost my phone but after reading your valuable and helpful words, I get it back, smiling face comes to me again..wow.. thank you so much..
FPThatea said:
Many many thanks to you Saurabh007.. I thought I've lost my phone but after reading your valuable and helpful words, I get it back, smiling face comes to me again..wow.. thank you so much..
Click to expand...
Click to collapse
My pleasure!
Sent from my C2104 using Tapatalk
[ROM][6.0] CyanogenMod 13.0 [ALPHA] have bricked some XPERIA L devices. So this thread is to help those people who are facing the problem. I came across some methods to recover their Xperia L. Although, I am not sure it will work because I haven't tried it myself (Can't risk bricking my phone on purpose just to check this method which may or may not fix it ). But please go ahead and try it.
It's better to try than to cry!
Click to expand...
Click to collapse
METHOD 1
Remove Battery, press power button for around 10-12 seconds..then press and hold volume up, a Insert the battery , fash tft file using flastool
Source: https://www.youtube.com/watch?v=lycyxdkNlz8 (Comment by KãyRá S.s)
METHOD 2
Disconnect the phone from PC if connected Remove the battery Press and hold the power button for 15-20 seconds Re-insert battery Flash latest FW using flashtool..
Source: https://www.youtube.com/watch?v=lycyxdkNlz8 (Comment by BEST FULLAPPS)
If anyone know a better method or a suggestion please post it...
you can't fix in any way broken partition table, only with jtag and similiar, this all should work for semibricked devices...
Hard Brick......
Flashing_Expert said:
you can't fix in any way broken partition table, only with jtag and similiar, this all should work for semibricked devices...
Click to expand...
Click to collapse
Sir plz help me out i have bricked my device. When i connect it to a charger it shows a greenish light for a second and the it fades out. No detection my pc. It says that it is an unidentified device. actually it happened after i flashed cm13 by olivier. It booted up fine. I then just shut it down to install gapps. But it didnt respond any more.
udaykapoor97 said:
Sir plz help me out i have bricked my device. When i connect it to a charger it shows a greenish light for a second and the it fades out. No detection my pc. It says that it is an unidentified device. actually it happened after i flashed cm13 by olivier. It booted up fine. I then just shut it down to install gapps. But it didnt respond any more.
Click to expand...
Click to collapse
You had to install the latest package.. if u didn't only then u would've got hard bricked... cm13 is now tested by too many people and it runs without bugs.. so it may be the fault with the version of cm13 you used..
udaykapoor97 said:
Sir plz help me out i have bricked my device. When i connect it to a charger it shows a greenish light for a second and the it fades out. No detection my pc. It says that it is an unidentified device. actually it happened after i flashed cm13 by olivier. It booted up fine. I then just shut it down to install gapps. But it didnt respond any more.
Click to expand...
Click to collapse
oh damn another one guy same happened to me with same rom ...
sorry but this means your phone is dead like mine, your bootloader is corrupted so device is unable to boot to kernel nor to system
no flashmode or fastboot mode, you can see it only in device manager (with proper drivers) as qhusb dload 9008
sadly we don't have proper files for QPST software so nobody unbricked his XL to this date
only chance is motherboard replacement
udaykapoor97 said:
Sir plz help me out i have bricked my device. When i connect it to a charger it shows a greenish light for a second and the it fades out. No detection my pc. It says that it is an unidentified device. actually it happened after i flashed cm13 by olivier. It booted up fine. I then just shut it down to install gapps. But it didnt respond any more.
Click to expand...
Click to collapse
btw you had 2 partitions on your microsd? I need to know...
Hi, is it possible to have some more information on the situations with cm13 that have caused a hard-brick? I understood that that the features such as link2sd and app2sd are potentially dangerous? Is this understanding correct? If yes, could you please explain why and under which circumstances this could create troubles?
Do you have any further suggestions on what to avoid?
Many thanks in advance for your expert advice.
I wanted to try cm13 on my spare xperia l, but would like to avoid a hard brick...
Cheers,
Hennng
xleng said:
Hi, is it possible to have some more information on the situations with cm13 that have caused a hard-brick? I understood that that the features such as link2sd and app2sd are potentially dangerous? Is this understanding correct? If yes, could you please explain why and under which circumstances this could create troubles?
Do you have any further suggestions on what to avoid?
Many thanks in advance for your expert advice.
I wanted to try cm13 on my spare xperia l, but would like to avoid a hard brick...
Cheers,
Hennng
Click to expand...
Click to collapse
Its already been fixed in newer builds, also, the developer has stopped the development. But you can surely use CM13 Based ROMs since they also have better editing options.
I really cant wait for cm13. It really pleases me If rom get fixes
Hi xda,
So I had a soft bricked Micromax Canvas a290 which boot looped and couldnt access recovery. I flashed it with a stock ROM. Now the phone is hard bricked, and I'm thinking probably because the rom I downloaded had issues. I looked up another stock rom from xdafirmware, and am trying to follow a tutorial on youtube on flashing a hard bricked device.
The issue I have here is this:
The tutorial says the phone is supposed to connect and disconnect every 7-8 seconds (evident by the sound windows makes when usb device is connected and disconnected).
The thing is, when I connect my device windows makes the connected sound, but the device doesnt disonnect. SP flash tool cant flash my phone. I have tried any and every button combination, but they dont seem to help.
I am an tech enthusiast myself, and I have flashed a lot of mtk soft bricked devices before, but I am totally stumped here.
Can anyone help?? Any ideas whats happening? Any help is greatly appreciated. Thank you.
Tiks_Baralous said:
Hi xda,
So I had a soft bricked Micromax Canvas a290 which boot looped and couldnt access recovery. I flashed it with a stock ROM. Now the phone is hard bricked, and I'm thinking probably because the rom I downloaded had issues. I looked up another stock rom from xdafirmware, and am trying to follow a tutorial on youtube on flashing a hard bricked device.
The issue I have here is this:
The tutorial says the phone is supposed to connect and disconnect every 7-8 seconds (evident by the sound windows makes when usb device is connected and disconnected).
The thing is, when I connect my device windows makes the connected sound, but the device doesnt disonnect. SP flash tool cant flash my phone. I have tried any and every button combination, but they dont seem to help.
I am an tech enthusiast myself, and I have flashed a lot of mtk soft bricked devices before, but I am totally stumped here.
Can anyone help?? Any ideas whats happening? Any help is greatly appreciated. Thank you.
Click to expand...
Click to collapse
Greetings and welcome to assist. I can find very little information for your device apart from this thread which may help, can you connect to the device just using fastboot ?
https://forum.xda-developers.com/android/general/tutorial-micromax-canvas-knight-a290-t2872896
Good Luck
Sawdoctor
Do people even check these things anymore? My phone is HARD BRICKED. The screen won't turn on, only the white LED is flashing when I plug it in, and before anyone asks, NO I CAN'T ENTER DOWNLOAD MODE/RECOVERY. My phone only shows up as a Qualcomm device. If you see this, at least tell me if I can fix it or not. I've tried Mobile Upgrade Q, Panasonic Eluga, and QFIL software but they all FAILED. What am I missing?? Oh and can someone PLEEEASE link me to an Alcatel Idol 3 stock Lollipop ROM because I'm dying here. Don't suggest Mobile Upgrade Q for getting the stock ROM. Refer to my last post for a less stressful details. Thaaanks.
Use Panasonic Eluga Switch program and what error did you get?
Sent from my TCL IDOL3 using Tapatalk
I got Error Code 5002. I can't get my phone into Download / Recovery, but if I press the power button for a really long time while connected to my PC, my PC makes a USB disconnect sound. My phone still shows up in Device Manager if I do this though.
Give me Teeamviewer id and pass at PM later and i will help you
Sent from my TCL IDOL3 using Tapatalk
So I have to make a Teamviewer account now or what?
edit: ah nevermind, I just downloaded it. I'll give it to you in like, 2 hours. Is that alright?
same proble, any hope?
Alek Dev said:
Give me Teeamviewer id and pass at PM later and i will help you
Sent from my TCL IDOL3 using Tapatalk
Click to expand...
Click to collapse
hi! i'm having the same issue with my phone...any hope?
would it be too much to ask if you could you help me?
booting from SD card?
artpadgett said:
hi! i'm having the same issue with my phone...any hope?
would it be too much to ask if you could you help me?
Click to expand...
Click to collapse
sry for the double post, but maybe this is indeed hopeless. I've been playing with the idea of booting it up with an SD card though... I might as well try since my phone is already dead and after trying everything else, nothing seems to help or unbrick my phone... if I manage to find something interesting, i'll post it here or make a new thread.
Did you solve this problem?