[Q] Bricked TF101 not even charging !! Help Please - Eee Pad Transformer Q&A, Help & Troubleshooting

hey there
i have done some serious trouble with my tf101... the main problem existed when i did a super wipe by flashing a zip names named super wipe for Revolution HD Rom... At this point the tablet only booted until asus and nvidia tegra logo appeared, afer that i tried nvflash and easy flasher and unfortunately both did not work... but would like to note that at first i was able to get into apx mode but now the tablet is not even charghing or turning on ! Please any advice would be much much appreciated..

OK now I fixed it with easy flasher tool... its so great i am so happy ive been working like 6 complete hours to fix it !!
Just flashed the stock rom and everything fine
Many thanks to the great devs out here

Related

Help with asus tf101. Noobie at work!

I previously had a post on how to flash a new rom onto the tablet because i had done it wrong originally and now i cant use the tablet because it keeps restarting itself. I tried updating the android revolution rom but i clicked on cm9 update instead and now its acting up! It wont let me access the sd card through recovery mode nor through the rom manager app! Someone told me about odin but didn't really explain much else. Any help on how to reset the system through another computer would be really great. Thanks...!

[Q] Bricked Kross GY-601 Chinese Tablet

Hi, I have a Kross GY-601 Tablet... One of the cheap chinese tablet you can pickup at factorydirect (Canada)
I seem to have bricked it when attempting to port Clockwork Mod Recovery to it. It does not show anything on screen or do anything, When I connect it to my computer.. It shows up as M6-CHIP in Device Manager as shown in my image.
The internal storage is completly gone as a result of my failed attempt to un-brick it..
It would be a great help if someone helped me fix this..
Thanks in advance..
-Henrique
PS: I'm only 13 sorry if my description of the problem is a bit bad..
Sooo,
You probably don't have proper drivers, use PDANet ones, they work even with obscure tablets.
You tried to port CWM or flash?
It's not bricked since your computer detects it
Last thing, do you have a backup recovery image or another recovery image that works so you can get it back up?
Daniel
I was dumb enough not to do any recovery image backups..
Also.. I ported cwm then flashed it with dd just poped the .img into the recovery block.. but since I didn't compile it properly when I adb reboot recovery.. It got into a boot loop.. so I tried to fix it but broke it even more... So then I tried re-writing the firmware for generic 4.1.2 chinese tablet.. but that messed it up to the point were it only shows as M6-CHIP.. i can only turn on and off.. nothing else.. no boot no screen light up nothing..
I can help you BUT....
loureirom_ said:
Hi, I have a Kross GY-601 Tablet... One of the cheap chinese tablet you can pickup at factorydirect (Canada)
I seem to have bricked it when attempting to port Clockwork Mod Recovery to it. It does not show anything on screen or do anything, When I connect it to my computer.. It shows up as M6-CHIP in Device Manager as shown in my image.
The internal storage is completly gone as a result of my failed attempt to un-brick it..
It would be a great help if someone helped me fix this..
Thanks in advance..
-Henrique
PS: I'm only 13 sorry if my description of the problem is a bit bad..
Click to expand...
Click to collapse
Even i am having the same device on its stock rom and kernel so i guess i can help you i was into rooting and upgrading it but didnt do it as i was waiting for a backup device so if i brick it i dont have to wait to buy a device but i am stupid and dont know how to take a backup of the stock rom. If you will help me know how to do that i can help you in return by uploading the stock rom and sharing the link.:highfive:

[Q] [NEED HELP] Chainfire 3d Brick USB Debugging OFF

Hi this is my first post so please excuse my lack of knowledge,
I have an Alcatel One Touch Idol Mini (6012A) that I have rooted. I recently tried installing Chainfire 3d, all was fine until I installed the drivers and rebooted. Now im stuck in a boot-loop (fun). And the worst part is... My USB debugging is OFF. :crying:
If anyone can help that would be SOOOOO AMAZING. Im at my wits end with this problem.
Please Help -Duckq
The only option seems flashing your stock firmwire through odin
Thanks Sooooo Much
samsungrockz said:
The only option seems flashing your stock firmwire through odin
Click to expand...
Click to collapse
Hey, I have just flashed the stock rom!!!!
And it fixed my problem with chainfire 3d. But I used SP flash tools ( because odin is meant for Samsung devices)
Also ive now got a custom recovery TWRP which I am in the process of backing up.
THANK YOU SOOOOOOO MUCH
Your a life saver:angel:
-Duckq:good:

[Completed] Huge mistake! Please help guys :(

Hello everyone, i'm new here so..sorry if i post this in a different place, but anyways..
i'm using Infocus M2 4g, i'm really happy with it, but yesterday i decided to install an android 5.0.2 custom ROM, maybe i forgot to wipe cache and make a factory reset before installing it, now my phone works till the welcome page, and the screen touch isn't working, and whenever the screen turns off, the device reboots again and keeps doing it over and over, i don't have a custom recovery, i flashed the ROM by a tool called DinDong and it requires usb debugging so that i can install a different ROM, and get rid of the problem, i can get to the fastboot screen, but i can't flash a room trough that :/
so this means .. NO Custom Recovery, No USB debugging, .. nothing :crying:
i would really appreciate it if you guys could help me, i have so many friends that i want to talk to again on whatsapp, and i don't want to use bluestacks again i need to get back my phone working,
thank you so much for reading this, and please reply as soon as possible)
and sorry for my English
Warlock-idlaasri said:
Hello everyone, i'm new here so..sorry if i post this in a different place, but anyways..
i'm using Infocus M2 4g, i'm really happy with it, but yesterday i decided to install an android 5.0.2 custom ROM, maybe i forgot to wipe cache and make a factory reset before installing it, now my phone works till the welcome page, and the screen touch isn't working, and whenever the screen turns off, the device reboots again and keeps doing it over and over, i don't have a custom recovery, i flashed the ROM by a tool called DinDong and it requires usb debugging so that i can install a different ROM, and get rid of the problem, i can get to the fastboot screen, but i can't flash a room trough that :/
so this means .. NO Custom Recovery, No USB debugging, .. nothing :crying:
i would really appreciate it if you guys could help me, i have so many friends that i want to talk to again on whatsapp, and i don't want to use bluestacks again i need to get back my phone working,
thank you so much for reading this, and please reply as soon as possible)
and sorry for my English
Click to expand...
Click to collapse
Hi and thank you for using XDA Assist
Try to head over here
Good luck!

Chuwi vi8 android boot loop

hello
so last time i wanted to install that "touch fix" for my Chuwi vi8, after a reboot my tablet wasn't able to boot anymore, it just won't stop to reboot, i can still boot to Windows with lock+up volume + home button, i can also go in the stock recovery mode, yes i already tried factory reset and it didn't worked, how can i fix it ?
i can also get clockwork mode but i just have error closed... i installed all the drivers i was able to found but no one fixed the "error closed" when using sideload, also i don't know WHERE IS THE STOCK ROM...
I have this www needrom com download chuwi-vi8-dual-os
"file is too big" so i format in NTFS but then the tablet won't recognize it, and seems like it's the WINDOWS ROM i don't need the WINDOWS ROM I JUST NEED THE STOCK ANDROID ROM
i've been trying to fix this since MONTHS, tried yesterday, it took my whole day today and yesterday STILL NOTHING.
i reposted this here beacause i think i wasn't in the good category sorry i'm new
IF someone can REALLY HELP ME, do i'll have to PAY SOMEONE to fix my tablet ??? Like really, i already posted this in december no one answered me...
Ok, so it can't be fixed, great ! Thanks ! XDA brokes my device and won't repair it....

Categories

Resources