Database Info

Huawei Ideos U8150 Recovery Guide

Many people seem to be having a lot of trouble flashing recoveries for their Ideos so I figured I would write this thread because I haven't found any other guides for flashing U8150 recoveries.
Method 1
1. Install Terminal Emulator from the market.
2. Install Root Explorer from the market.
3. Download the recovery of your choice and copy the recovery.img to your sd card. (if its not named recovery.img rename it)
4. With Root Explorer, navigate to where the recovery is and copy it to /system/bin/ (remember to select mount as R/W first in order for it to copy.)
5. Open Terminal Emulator and enter the command "su" (without the quotes)
6. After that enter the command "flash_image recovery /system/bin/recovery.img" (again without the quotes)
7. That's it, the recovery has been flashed. Reboot in recovery to confirm.
8. Once you've confirmed the recovery flashed properly remember to delete the recovery.img from /system/bin/ (using root explorer, and mount as R/W)
Method 2
I find this method much easier because you don't have to go through the trouble of installing drivers. Also you don't need to connect your device to your PC. Your device needs to be rooted though. If your device isn't rooted simply download z4root from the market and root it.
1. Download and install ROM Manager from the market.
(If you simply want to flash the latest working ClockworkMod Recovery and not an older version or UltraJack skip to step 6.)
2. Navigate to the folder /clockworkmod/download/mirror.sea.tdrevolution.net/cm/recoveries/ (create the folders if they are not already there)
3. Delete any files in that folder.
4. Download the recovery you want to use from the recovery links below. Unzip the file. Rename the "recovery.img" file to "recovery-clockwork-3.0.2.4-ideos.img". (See note below)
5. Copy the renamed "recovery-clockwork-3.0.2.4-ideos.img" into the recoveries folder (/clockworkmod/download/mirror.sea.tdrevolution.net/cm/recoveries/)
6. Open ROM Manager and select Flash ClockworkMod Recovery. It will bring up a list of devices, just scroll down until you find Huawei U8150 Ideos and select it.
7. ROM Manager will flash the recovery image for you and you're done.
Now you have a working recovery. To test select Reboot into Recovery from ROM Manager.
Since you are renaming the recoveries remember to keep track of which recovery is currently in the recoveries folder.
Note: recovery-clockwork-3.0.2.4-ideos.img is the name of the latest ClockworkMod Recovery in rom manager at this time (28/04/2011). If it is updated and I haven't updated the thread, change the name of the recovery to the latest version.(i.e if the latest recovery is ClockworkMod 3.0.2.5, rename the img to recovery-clockwork-3.0.2.5-ideos.img instead of recovery-clockwork-3.0.2.4-ideos.img)
Method 3
Installing Drivers
Windows 7:
Download and install PDANet. That should install the drivers for you.
Alternatively, you could download the drivers and install them manually. First download the drivers for your OS from here.
Drivers Windows 32-Bit Mediafire Multiupload
Drivers Windows 64-Bit Mediafire Multiupload
Connect your device(you don't need to turn on USB storage) then open device manager. Right click on your device and select properties, select the hardware tab and then select properties. Select the drivers tab, then select Reinstall/Update Driver. Choose the option (Browse my computer for driver software) and select the drivers you just downloaded. (Extract the zip file first)
MacOS
Download and install PDANet. That should install the drivers for you.
Linux
Follow this guide by bloodychaos to get ADB working.
Flashing Recovery
1. Once you have the drivers installed download the recovery of your choice from the links below.
2. Extract the zip file and open the folder.
3. Turn off your phone.
4. Connect your phone to your PC.
5. Reboot your phone in bootloader mode. (Turn it on while holding the Volume Down button and the End(Red) Key.)
6. Run the install-recovery file/script for your OS found in the extracted recovery folder.
7. Once it flashes your phone should reboot.
N/B If you have trouble with the drivers or any other problems try Method 1.
Now you have a working recovery. To test turn off your phone, then turn it on while holding the Volume Up Key and the Green(Call) Key.
Recovery Links
ClockworkMod 3.0.2.4 (by marcnvidic)
Download Mediafire Multiupload XDA Thread
UltraJack 6.2.2 (by Ultrakiller)
Download Mediafire Multiupload XDA Thread
ClockworkMod 3.0.1.(by udK)
Download Mediafire Multiupload
Credits
marcnvidic, Ultrakiller, udK for making the recoveries. bloodychaos for the Linux ADB guide. Koush for ROM Manager. f1ng3r for pointing out the terminal emulator method.
All other Ideos devs who've helped me along the way because I picked up a lot of this info from random threads.

Reserved for future use.

Thnx, very informative

No Huawei U8150 Ideos on the list of ClockWorkMod
wachw said:
6. Open ROM Manager and select Flash ClockworkMod Recovery. It will bring up a list of devices, just scroll down until you find Huawei U8150 Ideos and select it....
Click to expand...
Click to collapse
I've just downloaded Rom Manager Premium c4.2.0.2 (latest) from the market and i can't find the Huawei U8150 Ideos on the list of ClockWorkMod
Am i missing something? I copied the image file to the directory specified.
cheers,
Simon

sayo9394 said:
I've just downloaded Rom Manager Premium c4.2.0.2 (latest) from the market and i can't find the Huawei U8150 Ideos on the list of ClockWorkMod
Am i missing something? I copied the image file to the directory specified.
cheers,
Simon
Click to expand...
Click to collapse
For some reason the ideos does not appear on the list, I have no idea why, you might have to try one of the other methods to flash a recovery.

wachw said:
For some reason the ideos does not appear on the list, I have no idea why, you might have to try one of the other methods to flash a recovery.
Click to expand...
Click to collapse
Thanx for the quick reply, i ended up using method 3.
Just one thing about method 3, the batch file doesn't exist in the ClockworkMod 3.0.2.4 (by marcnvidic) link as it's only an .img file. So i simply downloaded the ClockworkMod 3.0.1.(by udK) zip file, and replaced the image with the newer 3.0.2.4 after unzipping it.
Thank you for the guide, i've successfully flashed clockworkmod, and backed up the phone. now all i have to do is choose a ROM.
which ROM do u suggest???
cheers,
Simon

sayo9394 said:
Thanx for the quick reply, i ended up using method 3.
Just one thing about method 3, the batch file doesn't exist in the ClockworkMod 3.0.2.4 (by marcnvidic) link as it's only an .img file. So i simply downloaded the ClockworkMod 3.0.1.(by udK) zip file, and replaced the image with the newer 3.0.2.4 after unzipping it.
Thank you for the guide, i've successfully flashed clockworkmod, and backed up the phone. now all i have to do is choose a ROM.
which ROM do u suggest???
cheers,
Simon
Click to expand...
Click to collapse
That was the official link from marcnvidic, the multipuload & mediafire mirrors should have the batch files. Anyway, for the rom I would suggest FUSIONideos or Dronix 0.4, there's a poll somewhere on this forum and those are the most popular, Gingerman V4 is also pretty good but I wouldn't suggest it as your first rom because its still relatively new and is still being improved so it isn't perfect as a daily use rom yet. I switch btw fusion & gingerman, but I can tell you fusion is pretty stable. One thing to note however, if you are not using gingerman or another cyanogenmod port, I would suggest using clockworkmod by udK as your recovery, cwm 3.0.2.4 has some issues making backups of other roms.

Mate, I'm loving this
So far i've flashed CM6.1 port, Fusion, and Dronix 0.4! hehe i'm addicted now! Right now i'm back to CM6.1, but will try Gingerman V4 soon
Thanx for your help mate, you're a champion.
EDIT: thought i'd explain why i'm on CM6.1. Reason being is that I even though i think Fusion is the better one so far, I can't seem to have a solid 3G connection.
I'm from Sydney Australia, and with Optus. The APN seems to be correct and all, but the phone keeps switching from 3G to H.

tq for this information...i have done it

thanks !!!!!

I'm having a bit of trouble.
I was trying method 2 and clicked the wrong phone model. I went to change it but found that "Huawei IDEOS U8150" is not listed. Now I cannot access my recovery menu, and cannot install clockwork recovery. How would I fix this? I've been searching for hours and only found ways to remove it via the recovery menu.
Everything is functioning fine so it's not a big problem, I just can't get to the recovery menu/boot loader.
Also, I attempted method 1 because it doesn't involve the use of the recovery menu. It says, "flash_image: not found" when I type the command.
Nevermind, put about another hour into searching. Thank you so much for this guide it helped me alot.

I installed ROM Manager and pressed "Flash ClockworkMod Recovery".
It downloaded some files and flashed the Mod.
(I have my u8150 rooted using SuperOneClick)
Now it shows that my ClockworkMod Recovery version is 3.0.2.4
BUT the problem is that:
1>If I press reboot into recovery, the phone reboots and I end up staring at the IDEOS logo for ... like ever.
2>I pressed Backup Current ROM and after giving it a name (Stock ROM), I pressed OK and again the same result.
3> I found on the internet that to go into the recovery mode I need to press the SEND (green button) and the Volume UP together and then press Power.
I did it, even held the three buttons in the next try... but sadly every time the phone got stuck and I ended up looking at the IDEOS logo.
and the only way to get the phone working again was to take out the battery and press Power. (the phone itself is running fine)
PLz kindly help me out on this.. am I missing something??
Thnx

That means the recovery didn't flash correctly. Are u sure u selected the right phone from the rom manager list. Try flash recovery again. But first u need to delete everything in the clockworkmod/download directory on the sd card. Or if you know how to, just delete the recovery image in that folder.

yes I selected the corret phone i.e. Huawei u8150 Ideos
i deleted everything in the clockworkmod/download directory on the sd card
re-flashed..
still the same problem
btw.. during flashing, twice I got a pop-up asking me to either "force close" or "wait" and I pressed "wait" both times.
P.S. I just noticed after removing the battery that it says the model of my phone is U8150-D. I wonder what the "D" stands for?

It shuld not be force closing. Maybe rom manager has a problem. Try reinstalling it. If that doesn't work I suggest trying one of the other methods to flash the recovery.

ok so ive just tried Method 1 and followed every step... and the funny thing is that when I enter the following command in terminal emulator:
flash_image recovery /system/bin/recovery.img
.. it says
flash_image: not found
lol
now im downloading ultrajack
Update:
Ive tried Method 3:
and for 10 minutes now.. my command prompt is still showing this message:
< waiting for device >
:-(

For method 3 try running the bat file first then when it shows you the waiting for device message turn on the phone in bootloader mode.

just did as you said, i turned off the phone.. ran the bat file, when it said waiting for device I plugged in the phone (battery charging started), then I pressed power while holding Red and Volume Down...
the result is the same..
(the same was the result when running ultrajack)
>im just wondering... do I need to install any kernel or something before doing this??
>also I noticed that the CWM's recovery.img that I got from this forum is 3.94MB, while the one I downloaded through the Rom Manager was 3.71MB (on both tries).
P.S. how do I completely remove CWM and its files? so i can start the process fresh. I read at some forum that there is some file related to this called update.zip... whats that?
(Sorry for being a bother and thnx for your help)
UPDATE !!!
Its done... its finally done. Yattaaaaa!!!
ok so here is is what I did....
>I deleted everything in the clockworkmod folder like you once mentioned before.
>You said that while flashing I shouldn't be getting a pop-up that asks me to either force close or wait.
>So I had a hunch that the popup that appeared during the flashing might have been caused due to the screen timeout set at 30 sec (i mean a clash of two processes)
>So, i set the screen timeout to 30 minutes (hehe) and pressed Flash ClockworkMod Recovery from the Rom Manager.
>It flashed without any pop-ups and it successfully booted into recovery mode (and the first thing I did was to backup my phone)
Once again thnx for your support wachw.
... and if you don't mind can you help me with one more thing (if it's convenient for you)... plz guide me how to install multitouch for my phone provided here (coz nobody at that thread has been generous enough to guide me ;_; )
http://forum.xda-developers.com/showthread.php?t=1014183
[i have downloaded the multitouch patch and the complied kernel, plz guide me on what to do next. thnx ]

Sorry about the delay, been busy, but, if you send me the link to your provider's rom I can make a multitouch version for you. Why don't you want to install a custom rom?

here is the link to my provider's rom:
http://webftp.myppc.it/index.php?dir=Ideos/ROM/
direct link
http://webftp.myppc.it/index.php?dir=Ideos/ROM/&file=U8150 V100R001C230B828SP02(Pakistan Ufone ).rar
custom rom, hmm.. well ive heard about them but for now i want to see how much can the stock rom be modified xD
btw is it really possible to edit the rom and remove the simlock
someone here says so:
http://forum.xda-developers.com/showthread.php?t=850110&page=5

[CUSTOM ROM] LiquiDuos by Lucky76 x Acer Liquid Gallant Duo E350

LiquiDuos2 A.I.​ PIMP my ROM​
x​
Acer Liquid Gallant Duo E350 (C8)​
by Lucky76
(erlucky)​
PLEASE READ BEFORE CONTINUING ATTENTAMEMTE FOLLOWING LINES. Thank you.
ATTENTION as always for clarity and do not take any responsibility for any malfunctions BRICK or several of your Acer E350 Liquid Gallant Duo due to the use of the changes, files and guides that I have proposed here, then do these steps at your own risk danger, and I recommend you perform them only after being certain that you understand what you do and you understand the meaning and having read and re-read this post and the various guides that you will find.
Any operating errors could affect the use of your smartphone forcing you to send it in for repair in service.
Flashing is a dangerous action and should be done very carefully.
First custom rom for this new device of Acer with dual sim. I created this rom is a first base for those who want to try their hand at their own customizations and various modding. The changes made are few so this first custom rom stays true to the original graphics as well as to present the app with only the addition of two new (Quick Boot and NofrillCPU). Do not think in exceptional increases the performance of your device, the purpose is to be a base to start working. Of course, this custom rom is already including Root with SuperUser.
Being the first custom rom for this device and one of the few around these devices based mtk65xx I wanted to BETA version for any bugs that may arise.
In the following lines I will try to make a detailed guide to installing a custom rom.
TECHNICAL SECTION
Type Device: Acer Liquid Gallant Duo E350 (C8).
Base Rom Used: OS_Acer_E350_1.000.18 EMEA.FR_A40I_A ---> used files: system.img and boot.img taken from the downloaded zip file.
Acer Rom Date: 25/10/2012
Links Official Acer Rom: Here
Links Official Acer France: Here
System Android: 4.0.3 ICS
INSTALLATION GUIDE​
1. Pre Installation (Root, Recovery Mod and Advice)
A. Having the battery to 100%
B. Having a microSD almost 4 gb
C. Read and re-read again carefully review this guide and the guides for the root and recovery.
D. If you have not installed the SuperRecovery with Root passed through this Post and follow the step by step guide of ROOT. Then come back here and go to step E.
E. If you already have or you have just installed the SuperRecovery with Root continue with the installation of ClockworkMod 6.0.2.8 Beta 1 following the guidance found in this Post and then come back here and continue to drive through to step 2.
At this point, the first part is over and you will have your Gallant Duo with the permissions of the new Root and ClockworkMod Recovery installed.
2. Backup (System and Applications)
A. The market download a backup app like Titanium Backup (free) and take a backup of your applications that you have downloaded and installed earlier. Wipe carefully with you also lose all your sms and mms so if you do not want to lose save them with an app that you will surely find the Play Store.
B. Also from the market for those who have problems getting into Recovery with Vol + and Power download Quick Boot (Free).
C. Enter now in recovery using Quick Boot (if downloaded) Recovery choosing the menu for this app otherwise you have to turn off your device and enter the combination of the Vol + and Power.
D. Now you have to do a full backup system for restoring. Use the Volume keys go to the Backup and Restore menu and enter the Power Button.
E. In this sub menu drop down to the line "choose backup format" and confirm by pressing Power now get a line on the choice tar and confirm again with Power. You will set up the compression format. Tar.
F. Confirm that you see now on the first choice and that is "up" with the usual power button. Now just wait until the full backup! your Device (boot.img, recovery.img, System, Data and Cache).
G. Using the Volume keys go to the line + + + + + Go Back + + + + + and press Power.
H. Finally, again by pressing Power up line reboot system now to restart your device.
I. With the device turned on connect it to your PC using the USB cable and you will see the microSD ext (sdcard2) a new folder "ClockworkMod" for further safety advice to copy it to your PC. Else within the full backup of your system and then again get done just before a backup inside your PC.
Now the second point is finished so if you're still not convinced continue with the guide and go to step 3 to flash the custom rom.
3. Installing Custom Rom (Download, Wipe, Flash)
A. Downloaded from the link at the bottom of the page in the section DOWNLOAD my custom rom.
B. Copy it into your microSD
C. Restart your Gallant Duo Recovery with Quick Boot or Off with the usual combination of buttons Vol + and Power
D. First of all we have to do a clean install to make the two Wipe in the recovery. Then go to the line "wipe data / factory reset" and confirm by pressing Power. Do the same with the next choice "wipe cache partion". You will have reported at this point your device to factory state as the first starting of the engine.
E. Finally you are ready to flash your custom rom going on line "install zip from sdcard" and confirm by pressing Power.
F. Again confirmed on the first choice "choose zip from sdcard" with Power.
G. Now you have to choose the file you want to install name_custom_rom.zip. For my custom rom LiquiDuos.zip confirming with the usual Power button.
H. Finally get off the line and confirmed - Yes - Install LiquiDuos.zip. ----> Finally will start the installation.
I. Wait until the installation is finished.
L. Restart your device confirming the line reboot system now.
M. Reset all like the first time. If you synchronize your account you will download the app you previously installed and any updates. Otherwise downloaded from the market or install Titanium Backup and reinstall the app that you had previously saved at the beginning of this guide.
SECTION DOWNLOAD
Link custom rom LiquiDuos 2 A.I. PMR ---> Here
md5sum ---> b2e959c886a9b2c3e50f53f37cfebbc9
Link custom rom LiquiDuos 1 beta ---> Here
md5sum ---> b21f4aa8e8b038a4bf438d7a7f4aa660
SECTION CHANGELOG
LiquiDuos 2 A.I. PMR
1. Installation with Aroma Installer
2. Set your rom
3. Aroma Installer with Pimp my Rom
4. Possibility of choice for memory Internal/External
5. Added Apps from 4.2 JB
6. Altro
Click to expand...
Click to collapse
LiquiDuos 1 beta
1. Added SuperUser for Root
2. Added Busybox
3. De-ODEX files
4. Added function / data / app
5. Added function / etc / init.d
6. Adding app Quick Boot
7. Adding app noFrillCpu
8. Changed ro.secure=0 on Boot
9. Added ADB Boot
Click to expand...
Click to collapse
SECTION BUG SOFTWARE and HARDWARE
SOFTWARE BUG:
BUG HARDWARE:
If you find any bugs please report hardware or software in this post so you will to solve them.
SECTION CREDITS
PaulOBrien ---> For its SuperRecovery with Root. (MoDaCo) ---> Link
Bin4ry ----> for his root method
dsixda ---> For your HTC Android Kitchen 0.220. (XDA) ---> Link
Koush Dutta ---> For its ClockworkMod ---> Link
Tuttoandroid.net ---> To web space and exclusive of my rom ---> Link
XDA Forum
Amarullz ---> For Aroma Installer ---> Link
Androguide.fr ---> Per il loro PIMP my ROM (ver. A.I.) ---> Link
Bye

I'm using it since two days, and it's working well :good:
Thanks

groovyloul said:
I'm using it since two days, and it's working well :good:
Thanks
Click to expand...
Click to collapse
Thank you....

Hello Erlucky,
Can you please post LiquiDuos 2 here to I am not allowed to download in the Italian forum and my registration was not a success due to lack off my Italian.

johnny7556 said:
Hello Erlucky,
Can you please post LiquiDuos 2 here to I am not allowed to download in the Italian forum and my registration was not a success due to lack off my Italian.
Click to expand...
Click to collapse
I did....
I have posted here.
Bye.

is this JB rom?
thanks in advance

hi to all,
I just wanted to say that i have updated my gallant duo to a new version of android (always ICS): the "Acer_AV40I_E350_1.000.23_EMEA.FR"
I think that the this rom should be updated because it is stopped to "Acer_E350_1.000.18 EMEA.FR_A40", i'm not able but if someone could it will be great

Everything For Micromax A110 Canvas 2

Everything for A110
ROMS:
Stock:
Stock ROM V1 - http://d-h.st/NOR
Stock ROM V2 - http://d-h.st/0lp
Mobistel Cynus T2 ROM - http://www.sendspace.com/file/usu6q7 (Flashable zip)
Flash tool - http://goo.gl/4tyQ5
Custom ROMS:
JMP Xtream - http://bit.ly/ZacyS2
Dr.Bhokali ROM - http://bit.ly/Zrslki
Radeon ROM - http://d-h.st/PnP
Drivers:
http://bit.ly/13bkuq2
Rooting:
Rooting Tool - http://bit.ly/WAuST3
1. Enable USB De-bugging from Settings- Developer Options - USB Debugging
2. Download and Extract the Rooting tool in a single folder
3. Make sure the Drivers are installed
4. Right click on the 'Runme.bat' in the rooting tool and click 'Run as Administrator'
5. Connect the device and press '1'
6. Wait for the process to complete
Recovery:
Stock - http://bit.ly/137WVzj
Clockworkmod - http://bit.ly/WidRft
1. Download 'Mobile Uncle Tools' from Play Store.
2. Make sure your Phone is rooted
3. Rename the recovery you want to flash to 'recovery.img' and place it in the root of
your SD card.
4. Select 'Recovery Update' in 'MUT' and select the recovery.img from the list.
Storage Swapping:
Download - http://d-h.st/LFT
1. Install 'Root Explorer'
2. Using Root Explorer go to /system/etc and rename the file 'vold.fstab' to 'vold.fstab.bak'
3. Paste the downloaded 'vold.fstab' file to /system/etc and give system permissions
4. Reboot!
init.d Support (Required to run Supercharger):
1. Download 'Busybox Insatller' from Play Store.
2. Install Busybox 1.18.2 from 'Busybox Installer'
3. Download 'Script Manager' from Play Store.
4. Using 'Root Explorer' create a folder in the name of 'init.d' in /system/etc and give system permissions
5. Download the script from this link - http://bit.ly/WBY4ca
6. Open 'Script manager and browse to this script and run it as 'Superuser'
7. Reboot!
SuperCharger (After Enabling init.d):
1. Download Supercharger script - http://bit.ly/oBhiFg
2. Open 'Script Manager' and browse to the downloaded script.
3. Run it as Super user and the select the option you want
4. Reboot!
Entropy Seeder:
Use this to enhance your gaming experience and smoothness
1. Download Seeder Entropy - http://bit.ly/13bnMtm
2. Then flash this Zip through CWM - http://bit.ly/Uv8Fuy
3. Wipe cache and Dalvik Cache.
4. Reboot!.
12mp Camera Patch:
Flash via CWM this to use 12mp rear and 1.3mp front camera - http://bit.ly/Williy
Credits go to many. As of now I reckon Dileep Vargese and 'Droidiser.in'. If anyone knows, bring to my notice please.
Will be updated when more comes in
Pinocchio's nose grew with lies. My knowledge grows with 'Thanks' . Help it grow please
Facebook Support Group - https://www.facebook.com/groups/Micromaxcanvas2

kishoredroid said:
Everything for A110
ROMS:
Stock:
Stock ROM V1 - http://d-h.st/NOR
Stock ROM V2 - http://d-h.st/0lp
Mobistel Cynus T2 ROM - http://www.sendspace.com/file/usu6q7 (Flashable zip)
Flash tool - http://goo.gl/4tyQ5
Custom ROMS:
JMP Xtream - http://bit.ly/ZacyS2
Dr.Bhokali ROM - http://bit.ly/Zrslki
DZire ROM - http://bit.ly/TT21dQ
Drivers:
http://bit.ly/13bkuq2
Rooting:
Rooting Tool - http://bit.ly/WAuST3
1. Enable USB De-bugging from Settings- Developer Options - USB Debugging
2. Download and Extract the Rooting tool in a single folder
3. Make sure the Drivers are installed
4. Right click on the 'Runme.bat' in the rooting tool and click 'Run as Administrator'
5. Connect the device and press '1'
6. Wait for the process to complete
Recovery:
Stock - http://bit.ly/137WVzj
Clockworkmod - http://bit.ly/WidRft
1. Download 'Mobile Uncle Tools' from Play Store.
2. Make sure your Phone is rooted
3. Rename the recovery you want to flash to 'recovery.img' and place it in the root of
your SD card.
4. Select 'Recovery Update' in 'MUT' and select the recovery.img from the list.
Storage Swapping:
Download - http://d-h.st/LFT
1. Install 'Root Explorer'
2. Using Root Explorer go to /system/etc and rename the file 'vold.fstab' to 'vold.fstab.bak'
3. Paste the downloaded 'vold.fstab' file to /system/etc and give system permissions
4. Reboot!
init.d Support (Required to run Supercharger):
1. Download 'Busybox Insatller' from Play Store.
2. Install Busybox 1.18.2 from 'Busybox Installer'
3. Download 'Script Manager' from Play Store.
4. Using 'Root Explorer' create a folder in the name of 'init.d' in /system/etc and give system permissions
5. Download the script from this link - http://bit.ly/WlCPL6
6. Open 'Script manager and browse to this script and run it as 'Superuser'
7. Reboot!
SuperCharger (After Enabling init.d):
1. Download Supercharger script - http://bit.ly/oBhiFg
2. Open 'Script Manager' and browse to the downloaded script.
3. Run it as Super user and the select the option you want
4. Reboot!
Entropy Seeder:
Use this to enhance your gaming experience and smoothness
1. Download Seeder Entropy - http://bit.ly/13bnMtm
2. Then flash this Zip through CWM - http://bit.ly/Uv8Fuy
3. Wipe cache and Dalvik Cache.
4. Reboot!.
12mp Camera Patch:
Flash via CWM this to use 12mp rear and 1.3mp front camera - http://bit.ly/Williy
Credits go to many. As of now I reckon Dileep Vargese and 'Droidiser.in'. If anyone knows, bring to my notice please.
Will be updated when more comes in
Pinocchio's nose grew with lies. My knowledge grows with 'Thanks' . Help it grow please
Click to expand...
Click to collapse
Keep it up Good Going :good:
sorry for that (2 more rom in the treat)
i have one rom link
(Radeon™Rom : eXperience NXT)
http://forum.xda-developers.com/showthread.php?t=1981834

afzi said:
Keep it up Good Going :good:
sorry for that (2 more rom in the treat)
i have one rom link
(Radeon™Rom : eXperience NXT)
http://forum.xda-developers.com/showthread.php?t=1981834
Click to expand...
Click to collapse
radeon was not fully functional.. i will confirm with acervenky and if its ready for daily use, i will add it

Give the right way
kishoredroid said:
radeon was not fully functional.. i will confirm with acervenky and if its ready for daily use, i will add it
Click to expand...
Click to collapse
okes thanks for replay
i hope u used already thus three rom
can tell me, how i instal
Dzire Rom
http://forum.xda-developers.com/showthread.php?t=2043517]
couple of time i was install DZIRE ROM AND GO TO CUSTOM RECOVERY SELECT AND TRY TO INSTALL
BUT ITS FAIL
HOW CAN U USED OR INSTALL CAN U TELL ME
I WANT THIS ROM BECAUSE ITS MIUI BASED ROM

very informative post, my device is not detecting on my pc after installing custom rom. i am browsing sd card via using mobile go. can anyone help me to make it back to stock
thanks in advance
regards,
sunil:crying:

afzi said:
okes thanks for replay
i hope u used already thus three rom
can tell me, how i instal
Dzire Rom
http://forum.xda-developers.com/showthread.php?t=2043517]
couple of time i was install DZIRE ROM AND GO TO CUSTOM RECOVERY SELECT AND TRY TO INSTALL
BUT ITS FAIL
HOW CAN U USED OR INSTALL CAN U TELL ME
I WANT THIS ROM BECAUSE ITS MIUI BASED ROM
Click to expand...
Click to collapse
This ROM does not work. so removing it from the post.

sunilnair007 said:
very informative post, my device is not detecting on my pc after installing custom rom. i am browsing sd card via using mobile go. can anyone help me to make it back to stock
thanks in advance
regards,
sunil:crying:
Click to expand...
Click to collapse
Which ROM did you flash. BTW you can flash any of the stock ROMs from the post.

Removed system file from Micromax A110
Hi,
i was trying to do some changes to my micromax A110(android ics 4.0.4) with root access.
In an attempt to take a backup, i accidentally renamed /system/framework/framework.jar to /system/framework/framework.jar_old
Now the phone is not booting, i do not have CWM or other reflash tools.
I tried reflashing some ROM images, but they all fail with message: "Signature verification failed"
Is there someway i can regain access to the phone?
~Shailendra Kumar

maverick083 said:
Hi,
i was trying to do some changes to my micromax A110(android ics 4.0.4) with root access.
In an attempt to take a backup, i accidentally renamed /system/framework/framework.jar to /system/framework/framework.jar_old
Now the phone is not booting, i do not have CWM or other reflash tools.
I tried reflashing some ROM images, but they all fail with message: "Signature verification failed"
Is there someway i can regain access to the phone?
~Shailendra Kumar
Click to expand...
Click to collapse
Did you try flashing stock ROM V2 with the flash tool in the post? That will rewrite everything.

kishoredroid said:
Which ROM did you flash. BTW you can flash any of the stock ROMs from the post.
Click to expand...
Click to collapse
as on date i am using Radeaon rom v1 but my problem is same, pc is not resolving y phone. it only charging with usb cable. please help
:crying:
sunil

sunilnair007 said:
as on date i am using Radeaon rom v1 but my problem is same, pc is not resolving y phone. it only charging with usb cable. please help
:crying:
sunil
Click to expand...
Click to collapse
Cant get what you are trying to say. But download and install the drivers from the given link and try flashing your phone to stock ROM V2

Guys who would like to try out xperia launcher for their handsets can visit :
http://forum.xda-developers.com/showthread.php?t=2095956

Recovery not working
Last night i tried to get back to stock recovery so i restored it with MUT and when i went to recovery it didn't showed up. So i tried to get back in cwm recovery and it was also with the same result "Black screen" . My stock rom is working perfectly. Can anyone help me what to do as i want to install the T2 rom? Can we install it with flash tool?

Can the camera patch file should be installed in cwm or stock memory?
I am using jmp xtreme rom now.
Sent from my Samsung GT-S9081 using xda app-developers app

The stock V2 ROM..!
Can you please tell me if I have successfully updated or not here are my screen shots.....The orange signal for SIM1 is it correct? please help

nehalchoraria said:
Last night i tried to get back to stock recovery so i restored it with MUT and when i went to recovery it didn't showed up. So i tried to get back in cwm recovery and it was also with the same result "Black screen" . My stock rom is working perfectly. Can anyone help me what to do as i want to install the T2 rom? Can we install it with flash tool?
Click to expand...
Click to collapse
you cannot flah T2 via flash tool. go to /system/recovery-from-boot.p and rename it to 'recovery-from-boot.p.bak' and then try to flash stock recovery from MUT

violin.siva said:
Can the camera patch file should be installed in cwm or stock memory?
I am using jmp xtreme rom now.
Sent from my Samsung GT-S9081 using xda app-developers app
Click to expand...
Click to collapse
Flash it through CWM recovery

Arnav06 said:
Can you please tell me if I have successfully updated or not here are my screen shots.....The orange signal for SIM1 is it correct? please help
Click to expand...
Click to collapse
Yes.. you successfully flashed V2!

Cynus T2 ROM
I upgraded my A110 to Cynus T2 Yesterday from V2 ROM, and backup of userdata was taken immediately. Later, Factory Reset was done, and the problems started coming.
1) Default language changed to German, and the same was later changed to English by guessing the language menu.
2) The second major bottle neck was that there was no SIM connectivity to 2G network, either in SIM1 or SIM2. I tried everything possible, but failed.
3) My WIN7 laptop is now unable to detect my A110 in Switched OFF state with USB Debugging ON. As, a result, I am not able to flash back V2 ROM.
As a last resort, the previously saved user data was restored, and my A110 started working like a charm. Both the SIMs functional, and other features as per expectation. However, a factory reset will spoil every thing. Even now, my Laptop does not detect A110.
Kindly suggest how to revert back to V2 ROM.

JogyGeorge said:
I upgraded my A110 to Cynus T2 Yesterday from V2 ROM, and backup of userdata was taken immediately. Later, Factory Reset was done, and the problems started coming.
1) Default language changed to German, and the same was later changed to English by guessing the language menu.
2) The second major bottle neck was that there was no SIM connectivity to 2G network, either in SIM1 or SIM2. I tried everything possible, but failed.
3) My WIN7 laptop is now unable to detect my A110 in Switched OFF state with USB Debugging ON. As, a result, I am not able to flash back V2 ROM.
As a last resort, the previously saved user data was restored, and my A110 started working like a charm. Both the SIMs functional, and other features as per expectation. However, a factory reset will spoil every thing. Even now, my Laptop does not detect A110.
Kindly suggest how to revert back to V2 ROM.
Click to expand...
Click to collapse
Im on T2, no niggles. And it is getting detected without issues on the same win 7. When you connect your phone in factory mode, t2 will be recognized.

[ROM] HDC Galaxy S4 EX

Here you will find my ROMs built for the HDC Galaxy S4 EX phone.
These ROMs are built for the MTK6589T model with the 1.5GHz CPU and 2GB RAM/32GB ROM.
Based on stock ROM Build Number S4 20130604-224540
Baseband Version MOLY.WR8.W1248.MD.WG.MP.V7.P1, 2013/04/10 00:41
Kernel Version 3.4.5
I don't like to customise things too much (since everyone has their own preferences) so I have just done most of the basics.
Here is a list of what I have done to this ROM:
v1 ROM:
Based on stock ROM Build Number S4 20130604-224540
Baseband Version MOLY.WR8.W1248.MD.WG.MP.V7.P1, 2013/04/10 00:41
Kernel Version 3.4.5
Removed all Chinese based apps and useless apps
Installed Chainfire's SuperSU and enabled ROOT permissions
Installed BusyBox
Removed boot screen audio
Updated boot animation
Deodexed all apps
Added init.d script support
Updated gps settings
Applied some build.prop tweaks
Installed Titanium Backup 6.1.0
Installed Android Firewall 2.3.2
Installed RealCalc 1.7.3
Installed ES File Explorer 3.0.5.5
Installed GO Launcher 4.05
Installed GO Locker 2.03
Installed YouTube 5.1.10
Installed Facebook 3.7
Installed Twitter 4.1.8
Updated Google Play Music to 5.2.1224L.847622
Updated Google Play Services to 3.2.66 (845709-30)
Updated Google Play Store to 3.10.10
Updated Google Maps to 7.2.0
Updated Gmail to 4.6 (836823)
Go Launcher and Go Locker
I have installed these two apps since they are my favourite ones and are very customisable and skinnable.
Only problem is their default install now has a lot of advertising so best thing is to delete all the home screens and start new.
They are installed on the data folder so feel free to replace them with your own preferred launcher/locker.
Just remember not to move the launcher or locker themes to your SD card as they may not work properly after reboot. (especially locker themes)
With GO Locker installed the home button will skip the lock screen and go straight to Home.
To fix this open GO Locker, go into the Settings, choose Home Key Settings, enable Home Locked and follow the instructions.
The Home button will then correctly go to the lock screen from a power off state.
You should also select option Turn off system lock to avoid two lock screens appearing.
Download Here:
CWM v5.5.0.4 Recovery Image
HDC Galaxy S4 EX ROM by Bunta v1
Installing CWM Recovery:
Ensure you have VCOM USB drivers installed for your phone
Download the CWM Recovery image, extract it and run the SP Flash Tool
Click the button labelled "Scatter-Loading" and select the MT6589_Android_scatter_emmc.txt file
Select the RECOVERY partition and select the recovery.img file downloaded above
Ensure ONLY the recovery partition is selected
Click the Download button and connect your phone via USB
This should flash the recovery partition and will prompt you when complete
Booting into Recovery Mode:
You MUST connect the phone via USB cable to be able to boot into recovery mode
Turn the phone off and hold Volume Up + Power On button together to start phone
Keep holding both buttons until you see the android logo
ROM Installation:
Make sure CWM recovery is installed and boot into recovery mode
Download and copy ROM to sdcard (use adb push from recovery mode if you need to)
Choose backup and restore and then backup to internal sdcard to create a backup of your orginal ROM before proceeding
Choose install zip from sdcard and then either choose zip from sdcard or choose zip from internal sdcard depening on where you copied the ROM to
Reboot phone once complete (first reboot will take a bit longer than normal to build the dalvik cache)
Hit thanks button if it worked for you
If you would like to help further development all donations are very welcome.
More features will be coming soon!

Hi,
Im from Australia and got this phone as well.
I flashed this Rom you made and it works great , nice job.
I do have one Big Problem though my GPS only works when the screen is turned off. As soon as I turn the screen on I loose all eception from satellites.
Would you know what the problem could be ?
Any updates to this Rom of yours , maybe you made a new one from AOSP or Cyanogen ?
Look forward to your reply and keep up the great work for a great phone

DOOGEE F7 Pro - Development & Support

In order to keep this thread clean, please use this one to discuss about Development, Support or Software Updates.​
ROMs:
To avoid any possible issue, do not forget to backup your NVRAM so that you won't risk to lose your IMEI. How-to: http://www.anythingultimate.in/2015/11/how-to-backup-your-nvram-partition.html
Stock (Android 6.0)
- 20161207: https://cloud.mail.ru/public/2Rhv/g4hNyccdM or http://www.doogee.cc/bbs/viewtopic.php?f=10&t=34
DO NOT USE THE "Format All & Download" OPTION IF YOU CARE ABOUT YOUR IMEI! Choose "Download Only" or "Firmware Upgrade" instead.
Previous Releases:
- 20160920: https://drive.google.com/file/d/0Bziqh7RXsn-DcVhmQ1pHS01FdzQ/view
- 20160920 (OTA Update from 20160819, not Stock ROM): https://mega.nz/#!ENV2GRzS!H-JMxGI0aMqEm0wQOCZBZbj0GnFm73dSdAP64MwJqyA
OTA Update can be flashed only via Local Update feature. (Settings -> About phone -> Wireless Update -> Manual Update)
- 20160819: https://drive.google.com/file/d/0BzpZ7jq52i28RXY5N1M4bmJGN2c
Flash Tool
- SP Flash Tool v5.1628 for Windows & Linux: https://mega.nz/#F!dYUm0TbB!SWeMLb5Wu1NbRzTPQ8-s_A​
Recovery:
- TWRP 3.0.2: http://joco1114.synology.me/share/F7Pro/TWRP/​
Root:
Rooting Methods (if you are on Stock ROM)
- SuperSU (flashable using TWRP): http://forum.xda-developers.com/apps/supersu​
Extras (Root-Only):
Customization
- Xposed Framework: http://forum.xda-developers.com/showthread.php?t=3034811​
Useful Third-Party Apps:
Battery Life
- Amplify: https://play.google.com/store/apps/details?id=com.ryansteckler.nlpunbounce&hl=en
- Greenify: https://play.google.com/store/apps/details?id=com.oasisfeng.greenify&hl=en​

Thank you for this thread, waiting for my own phone. If you need, I can host files as a mirror in 24/7 with 200 mbits up.
Sent from my Nexus 5 using XDA-Developers mobile app

My phone has arrived! It has very nice screen, but the hyped camera is worst than my old Nexus 5 (8MP). Very noisy, and not so detailed. Maybe the next upgrade will solve it.
The problem: is there any idea, how can I access my phone? I have an unknown device in my Device manager, but I cant find driver. Tried MTP and USB device too. Interesting: PTP (Photo transfer) if working!
Thank you!
Edit: Windows 10 driver is not working properly. Have to unisntall it and reinstall MTK USB driver. MTP is working now.

20160819 Stock ROM & OTA Update from 20160819 to 20160920 added to first post

After updating, my 5 GHz WiFi stopped working. (timeout everytime) But 2.4 Ghz is a little faster, more stable.
Any change log?

joco1114 said:
After updating, my 5 GHz WiFi stopped working. (timeout everytime) But 2.4 Ghz is a little faster, more stable.
Any change log?
Click to expand...
Click to collapse
No changelog. My 5.0GHz WiFi works perfectly though.

@joco1114 : have you noticed some battery improvements with the latest OTA update? Here I see huge improvements.

Nope, but the bluetooth connection is better now. And the troubles with WiFi still exist. The SSIDs are vanishing, connection stable, but no internet transmission. I've tried several places with same result. Used Veloxity for better channel selection, but sometimes I got 65/135 Mbps, other 0.1/0.5 only. Or 0/0... The problem mainly appears on 5 GHz network.
Alberto96 said:
@joco1114 : have you noticed some battery improvements with the latest OTA update? Here I see huge improvements.
Click to expand...
Click to collapse

Here's Carliv Touch Recovery, but it's not fully complete yet. Some mounts still don't work, like sdcard, but you still can install root though adb sideload. I'll fix it up later.
goo gl 5h636h
Sorry, can't post links yet.

mars873 said:
Here's Carliv Touch Recovery, but it's not fully complete yet. Some mounts still don't work, like sdcard, but you still can install root though adb sideload. I'll fix it up later.
goo gl 5h636h
Sorry, can't post links yet.
Click to expand...
Click to collapse
Thank you, I appreciate your work.
I'm also facing issues with the touchscreen with any recovery I try to build, there is something we both are doing in the wrong way.
This is the link he can't post: goo.gl/5h636h

How can I install CTR? After that can I install root?

joco1114 said:
How can I install CTR? After that can I install root?
Click to expand...
Click to collapse
Just like TWRP, get the "scatter" file from the Stock ROM package, copy it in a folder (new one, it must be empty) where you put the "recovery.img" file together with the "scatter" file, then open SP Flash Tool, select scatter, press download. Done!

Thank you! I'm very new in this topic, I had a Nexus 5, I used adb/fastboot to flash recovery. MTK (and SP Flash Tool) is new for me, so sorry about my dumb questions.

I installed the img file (succesfully), started the phone with vol-/power, but I got the original recovery menu. Did I miss something?
Alberto96 said:
Just like TWRP, get the "scatter" file from the Stock ROM package, copy it in a folder (new one, it must be empty) where you put the "recovery.img" file together with the "scatter" file, then open SP Flash Tool, select scatter, press download. Done!
Click to expand...
Click to collapse

joco1114 said:
I installed the img file (succesfully), started the phone with vol-/power, but I got the original recovery menu. Did I miss something?
Click to expand...
Click to collapse
Vol + / Power, not Vol - / Power

Yep, Vol+/Power, I miswrote it.
J
Alberto96 said:
Vol + / Power, not Vol - / Power
Click to expand...
Click to collapse

joco1114 said:
Yep, Vol+/Power, I miswrote it.
J
Click to expand...
Click to collapse
Uhm ok, so you might have missed something. After flashing the device with SP Flash Tool, turn it on with Vol +/Power and go into recovery mode. If the device boots to the OS before you get into TWRP, then it will be overwritten losing the work you have done before.

TWRP Recovery by jemmini.
All thanks to him!
Mirror - Google Drive
Scatter file - here (need to unzip)
Drivers, SPFT, SN Writer - here

If I start the phone with vol+/power, I got 3 menu in very small font size. The first is Recovery. After that I got an open android icon (recovery) and "No command." title (or somthing similar). If I press vol+/power for a short time, the original recovery appear. Maybe everything is OK, but I press wrong buttons. There is no CTR. Trying TWRP...
Edit: TWRP is working! Thank you!

joco1114 said:
Edit: TWRP is working! Thank you!
Click to expand...
Click to collapse
U're wellcome )