Related
Yeah I know it's almost the same tut like ganeshp's tut Juopunutbear S-OFF
by the way, I just mixed it with Flow-Wolf's Unlock, S-OFF ,Root. This topic
So , BIG THANKS FOR THEM !!
I am not responsible for any damage to your phone or brick your phone!
This is the change of all:
Tested on:
Windows XP x32
Windows 7 x64
DropBox Downloads
Let's Begin!
Requierements:
Click to expand...
Click to collapse
- Install Android SDK
- Uninstall ALL HTC from your computer. (HTC Sync, for first! )
- Install Attached HTC Drivers (need to reboot your computer!)
- get the latest control bear from the official site download the "windows Ice cream sandwich" one ("windows Gingerbread" one if on gingerbread )
Preparations:
Click to expand...
Click to collapse
- unzip folders.
- Make Android folder on your pc ( mine is: C:\Android )
- Open SDK tool and install Android SDK Platform Tools and Android SDK Tools (Please update it if your SDK version is r11).
- After you installed look in \android-sdk-windows\platform-tools for 4 file: adb.exe | AdbWinApi.dll | fastboot.exe | AdbWinUsbApi
- Copy the files to Andorid folder.
- Copy the temp_root.bat and temp_root_remove.bat to the same folder.
- Restart your PC to ready for the progress.
Prepar your phone:
Click to expand...
Click to collapse
- Back up all!!
- Remove and reinsert the battery
- Go to bootloader ( volume down + power on)
- Select factory reset
- DO NOT TOUCH IT, just let it reboot.
- When rebooted skip the Installation tutorial, don't set anything.
- Uncheck Fastboot ( Menu / Settings / Power )
- Check USB Debugging ( Menu / Settings / Dev Options )
Click to expand...
Click to collapse
Temp Root:
Click to expand...
Click to collapse
- Conenct your phone to the PC via USB cable and select HTC Sync.
- Run the temp_root.bat
- Follow the commads.
- Do NOT TOUCH the device.
- When finished corerctly go to the next paragraph.
Juopunutbear S-OFF:
Click to expand...
Click to collapse
- Remove the back from your phone, you must unplug your phone to do that.
- Replug the phone
- Run the ControlBear
- Follow the commads on the screen.
Wire trick:
- take a cable!
- Press the cable on the sdcard protection during 0.5sec, release during 1.75sec press again during 0.5sec.
2 possibilities:
It doesn't work:
1 - Your phone do not restart. Try again
2 - Your phone restart, but stay on the same Juopunut Bear screen. You have an Error Code.
Close the cmd command and run the controlbear.exe again
It works:
Your phone restart. And the CMD said it's done.
- Follow the instuctions on the screen!
Remove Temp root:
Click to expand...
Click to collapse
- Turn on the phone
- Run remove_temp_root.bat
Hmm your done with the S-OFF
Click to expand...
Click to collapse
Root:
Click to expand...
Click to collapse
- Insert the files from the root-sensation-windows folder to your Android folder
- Connect your phone to the PC and select Disk Drive
( avoid usb hubs and usb 3.0 ports while connecting ..just connect the device directly to pc/laptop )
- Run root.bat
- Follow the instuctions
Gratz, your done with the root too,
Click to expand...
Click to collapse
CWM:
Click to expand...
Click to collapse
This is a cake-walk
Just download the Rom Manager from Market and isntall CWM with it!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
If it helpd, feel free to hit Thanks!
is it work on hboot 1.29?
gregeorgeraldo said:
is it work on hboot 1.29?
Click to expand...
Click to collapse
yes it works
rzr86 said:
yes it works
Click to expand...
Click to collapse
I've tried al the rooting methods. the permanent & temporary but no result at all
gregeorgeraldo said:
I've tried al the rooting methods. the permanent & temporary but no result at all
Click to expand...
Click to collapse
use Ganeshp's guide to S-OFF
check if you have take care all of the prerequisites that need(htc drivers,sdk tools)
also enable usb debugging mode from settings
use 2.0 usb ports not 3.0
check all these things and start again the procedure
rzr86 said:
use Ganeshp's guide to S-OFF
check if you have take care all of the prerequisites that need(htc drivers,sdk tools)
also enable usb debugging mode from settings
use 2.0 usb ports not 3.0
check all these things and start again the procedure
Click to expand...
Click to collapse
link die ?
babyfronano said:
link die ?
Click to expand...
Click to collapse
why are you still looking for S-OFF guides?
you are already on S-OFF
rzr86 said:
why are you still looking for S-OFF guides?
you are already on S-OFF
Click to expand...
Click to collapse
i can't install new rom ??? you could send to the link rom for its ??? please !
babyfronano said:
i can't install new rom ??? you could send to the link rom for its ??? please !
Click to expand...
Click to collapse
flash the latest version of 4ext recovery
http://www.4shared.com/zip/WnSyLWMaba/4EXT_Recovery_Touch_v1006_RC3_.html
extract the recovery.img and flash it via fastboot command
the command is fastboot flash recovery recovery.img
then flash the rom again
CWM Based recovery for Micromax A54
DOWNLOAD
Click to expand...
Click to collapse
STEPS TO INSTALL: (PC)
1.Download the recovery from above..
2.Extract the files in somewhere
3.Now open recover.bat file
4.And follow the instructions on screen to flash recoery
5.You are done...
Click to expand...
Click to collapse
STEPS TO INSTALL: (Via phone)
1.Downlaod recovery manager.apk
2.Copy the recovery.img from zip and paste it on sdcard
3.Open recovery manager.apk
4. Click on recovery Tab
5. There click on install recovery
6. Then click on the recovery image name of ‘recovery.img’
7. you have installed now...
How to use recovery:
Key functions:
Vol - = scroll..
Power button= ok
Click to expand...
Click to collapse
Download DDMS software for pc..
1.connect your phone to pc..
2.now open the sofware downloaded
3.Your phone screen will be visible on DDMS on pc..
4.Before using recovery U must Scroll using vol - untill you see the message "Back button is enabled"
5.Now use recovery..
Credits:
0.Dhinesh kumar (me for porting)
1.Sahil deep
2.Hardy Ahir
3.Sagnik Bhattacharya (Tester)
4.Sandeep Kumar (Tester)
Click to expand...
Click to collapse
Wanna more follow us at facebook group
Click to expand...
Click to collapse
Reserved
Resrved
One more post to park my bike
dhinesh77 said:
CWM Based recovery for Micromax A54
STEPS TO INSTALL: (PC)
STEPS TO INSTALL: (Via phone)
1.Downlaod recovery manager.apk
2.Copy the recovery.img from zip and paste it on sdcard
3.Open recovery manager.apk
4. Click on recovery Tab
5. There click on install recovery
6. Then click on the recovery image name of ‘recovery.img’
7. you have installed now...
How to use recovery:
Download DDMS software for pc..
1.connect your phone to pc
2.now open the sofware downloaded
3.Your phone screen will be visible on DDMS on pc..
4.Scroll untill you see the message "Back button is enabled"
5.Now use recovery..
Click to expand...
Click to collapse
good work
-Sahil Deep
Press Thanks Button
sahil11 said:
good work
-Sahil Deep
Press Thanks Button
Click to expand...
Click to collapse
Thank you dear friend
Pls include the FB group link
Good work man!! You rock...!!
dhinesh77 said:
CWM Based recovery for Micromax A54
STEPS TO INSTALL: (PC)
STEPS TO INSTALL: (Via phone)
1.Downlaod recovery manager.apk
2.Copy the recovery.img from zip and paste it on sdcard
3.Open recovery manager.apk
4. Click on recovery Tab
5. There click on install recovery
6. Then click on the recovery image name of ‘recovery.img’
7. you have installed now...
How to use recovery:
Download DDMS software for pc..
1.connect your phone to pc
2.now open the sofware downloaded
3.Your phone screen will be visible on DDMS on pc..
4.Scroll untill you see the message "Back button is enabled"
5.Now use recovery..
Click to expand...
Click to collapse
Good Work Dear you Rock again
Thanks
Hardy
jyothisthaliath said:
Pls include the FB group link
Good work man!! You rock...!!
Click to expand...
Click to collapse
Oh! forgot to provide the link..Thanks for remembering me,,,,
How to boot into recovery?
That DDMS software that you mentioned just shows my phone's screen. As you said to scroll what does that mean?
fuser1337 said:
How to boot into recovery?
That DDMS software that you mentioned just shows my phone's screen. As you said to scroll what does that mean?
Click to expand...
Click to collapse
Use vol - to scroll ,,,,
Jyothis,Hardy ahir,Sahil deep Thanks to all
Where can I find the source of that recovery?
The micromax A54 is similar to my Blu Dash 3.5 and am trying to compile cwm recovery.
erickreisbr said:
Where can I find the source of that recovery?
The micromax A54 is similar to my Blu Dash 3.5 and am trying to compile cwm recovery.
Click to expand...
Click to collapse
may i know whats your device name in fastboot mode and as well as in normal mode,,between have you tried this recovery..
dhinesh77 said:
may i know whats your device name in fastboot mode and as well as in normal mode,,between have you tried this recovery..
Click to expand...
Click to collapse
In normal mode is 1234567890ABCDEF and MSM7625ASKU3 in fastboot mode.
Fast Boot mode
Download the fastboot binary here. Boot your device into fastboot by pressing the key combination for your device. (Google 'your_device_name key combination enter fastboot mode' to know the key combination for your device or ask someone at xda in your device's section. Generally, it is power up + camera button. Whatever the key combination is, first switch off the device, then press those keys simultaneously till the screen lits up.) :good: :highfive:
can you add an update
can you add an update for cwm of mmx a 54
and the update is install milti rom in sd card
This thread is for only Cherry Mobile Snap (CMS) user.
REQUIREMENTS:
1. Drivers for CM Snap : http://d-h.st/yeJ
2. Firmware : http://d-h.st/EPH => Password : Tres Marias
3. CM Snap ( Your PHONE )
4. USB Cable
5. Research Download : http://d-h.st/tjo
Click to expand...
Click to collapse
Click to expand...
Click to collapse
STEPS:
1. Download, Extract and Install the DRIVERS . ( x64 for 64 bit Win7/8 , x86 for 32 bit Win7/8 )
2. Download the Firmware for your SNAP, also the ResearchDownload.
3. Open the Research Download.
4. On Research Download, click LOAD PACKET, then search for CM Snap by Tres Marias LOGO.pac
5. Now Click START.
6. Now, remove your phone's battery, and reinsert it.
7. After you insert your phone's battery, Hold Volume DOWN, and Connect your phone to your PC. ( Research Download starts flashing ).
8. If Research Download starts flashing, release the volume down, and wait it to finish flashing. !!
9. VOILA, Your phone is REVIVED..
Click to expand...
Click to collapse
Click to expand...
Click to collapse
REFERENCE:
https://www.dropbox.com/s/ybu98f10rjd03df/RSDL.PNG
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Credits:
Arjhay G. Delos Santos
Tres Marias
Cherry Mobile Snap (CMS)
Press THANKS button if you appreciate my work
[GUIDE][REVIVE] CM Snap V2
This thread is for only Cherry Mobile Snap (CMS) user.
REQUIREMENTS:
1. Drivers for CM Snap : Here
2. Firmware : Here
3. CM Snap V2 ( Your PHONE )
4. USB Cable
5. Research Download : Here
Click to expand...
Click to collapse
Click to expand...
Click to collapse
STEPS:
1. Download, Extract and Install the DRIVERS . ( x64 for 64 bit Win7/8 , x86 for 32 bit Win7/8 )
2. Download the Firmware for your SNAP V2, also the ResearchDownload.
3. Open the Research Download.
4. On Research Download, click LOAD PACKET, then search for CM Snap V2 [Updated].pac
5. Now Click START.
6. Now, remove your phone's battery, and reinsert it.
7. After you insert your phone's battery, Hold Volume DOWN, and Connect your phone to your PC. ( Research Download starts flashing ).
8. If Research Download starts flashing, release the volume down, and wait it to finish flashing. !!
9. VOILA, Your phone is REVIVED..
Click to expand...
Click to collapse
Click to expand...
Click to collapse
REFERENCE:
https://www.dropbox.com/s/ybu98f10rjd03df/RSDL.PNG
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Credits:
Arjhay G. Delos Santos
Cherry Mobile Snap (CMS)
Press THANKS button if you appreciate my work
awesome
very helpful....
cannot find md5 file
cannot find md5 file when i press start downloading... please help. im using the snap2
sir the version 1 is corrupted can you upload a .pac file without compressed? there has been a problem extracting your file can you help me?
Disclaimer: Flash at your own risk, I added tutorial so if something gone wrong to your phone, don't blame me.
Click to expand...
Click to collapse
New QMobile i9 Users
Click to expand...
Click to collapse
Click Here First
IMEI / NVRAM Backup
Click to expand...
Click to collapse
Method 1:
Before Installing the KitKat Follow These Steps.
1. Download MTK Droid Tool From Here
2. i9 must be rooted and USB debugging must be enabled before you proceed.
3. Attach the cell phone with data cable and run mtk droid tool as admin.
4. When device got loaded press the root button and grant root access on cell phone.
5. Click on IMEI/NVRAM button and click on backup.
6. Now in case after flashing u lost IMEI follow the same steps but now click on restore.
Method 2 (In Case No IMEI Backup):
1.Be patient and it will fix your imei
2.Download the IMEI_WINDOWS.zip from here
3.Extract the contents to C:\Users\Username (Current User)
4.Open command promp and cd to the IMEI_WINDOWS folder
5.Now type "imei.exe 123456789111111 123456789111111" without quotes
6.Just replace both the 15 digit numbers with your IMEI 1 and IMEI 2 respectively
7.Now a file named "MP0B_001_NEW" will be generated in your IMEI_WINDOWS folder
8.Just rename it to "MP0B_001"
9.Now download the IMEI_FLASHABE.zip from here
10.Extract this zip and go to "/data/nvram/md/NVRAM/NVD_IMEI/"
11.Delete the placehere file and paste your "MP0B_001" file here
12.Now zip the META-INF and data folder and flash it with recovery
13.You have to flash this after you see imei error on your 1st boot
14.Don't flash directly after the ROM, just do your first boot then flash it.
Method 3 (In Case No IMEI Backup):
1.Download IMEI Repair Tool
2.Download Support Files
3.Instructions To Follow
QMobile KitKat Release
Click to expand...
Click to collapse
Before you update Back Up your current rom using custom recovery in case you want to revert back
Try t0 use stable window 7 and a laptop with full battery.
Video Tutorial (Not in English just watch the video and follow)
Smart Phone Flash Tool and Driver
Firmware Download
1. First of all download the required files.
2. Install Tinno Driver.
3. Extract All Zips.
4. Run the Flashing Tool as admin (Right Click on the file and click on run as admin)
5. Download Scatter File From Attachments And Add It In Firmware Folder Now Load It, all files will be loaded now click on the address bar in front of recovery and select the recovery attached below.
6. Select Firmware Upgrade.
7. Power off the cell phone and remove battery.
8. Now click on download and attach the cell phone without battery to data cable.
9. Wait till flash. You are done. :laugh:
10. Enjoy Official Noir i9 KitKat.
Rooting Method
Click to expand...
Click to collapse
1. Just Install The Attached Zip named "4.4 Root.zip" or "subbinst-signed.zip" Via Recovery.
MyPhone KitKat Release
Click to expand...
Click to collapse
Before you update Back Up your current rom using custom recovery in case you want to revert back
Try t0 use stable window 7 and a laptop with full battery.
Trust yourself you can do it!. :laugh:
Video Tutorial (Not in English just watch the video and follow)
Smart Phone Flash Tool and Driver
Firmware Download
1. First of all download the required files.
2. Install Tinno Driver.
3. Extract All Zips.
4. Run the Flashing Tool as admin (Right Click on the file and click on run as admin)
5. Select Scatter Loader from the firmware, all files will be loaded now click on the address bar in front of recovery and select the recovery attached below.
6. Select Firmware Upgrade.
7. Power off the cell phone and remove battery.
8. Now click on download and attach the cell phone without battery to data cable.
9. Wait till flash. You are done. :laugh:
10. Enjoy KitKat.
Rooting Method
Click to expand...
Click to collapse
1. Just Install The Attached Zip named "4.4 Root.zip" Via Recovery.
MMX KitKat Release
Click to expand...
Click to collapse
Video Tutorial
1. Official KitKat Download
2. Smart Phone Flash Tool and Tinno Driver Download
3. Download the recovery file attached below.
4. Install Tinno Driver.
5. Extract All Zips.
6. Run the Flashing Tool as admin (Right Click on the file and click on run as admin)
7. Select Scatter Loader from the firmware, all files will be loaded now click on the address bar in front of recovery and select the recovery attached below.
8. Select Firmware Upgrade.
9. Power off the cell phone and remove battery.
10. Now click on download and attach the cell phone without battery to data cable.
11. Wait till flash. You are done.
12. Enjoy Offical KitKat.
Rooting Method
Click to expand...
Click to collapse
1. Just Install The Attached Zip named "subbinst-signed.zip" Via Recovery.
Custom ROM "Classic Kat" by Me
Click to expand...
Click to collapse
Click Here
Custom Rom Based On MMX
Click to expand...
Click to collapse
Custom Rom v3
1.Place ROM Zip File in your sdcard
2.Wipe data/factory reset
3.Wipe dalvik cache
4.Flash ROM from sdcard
5.Flash subbinst-signed.zip from attachment to get root access.
6.Enjoy a Proper and Stable KitKat
7.Download and Flash FILE_MANAGER.zip to remove error in the File Manager. :good:
8.If no engineering mode in your cell phone then download engineermode.apk and copy/paste in system app via Root Explorer
Increase App Storage
Click to expand...
Click to collapse
Use it only on MMX KitKat Release and on Custom ROM based on MMX. Not with MyPhone KitKat Release.
Step 1: Download "Internal APP storage (4GB MMXKK).zip" from bellow
Step 2: Extract the file
Step 3: Open SP Flash tools
Step 4: Add scatter file
Step 5:Select EBR1 and EBR2
Step 6: Click on Download
Step 7:Remove the battery from your Canvas 2 colors
Step 8:Connect your phone to pc via data cable
Step 9:wait for the completion of Flashing Process
Step 10:Reboot your Phone
Step 11ull down Notification panel and tap on the msg "Damaged Internal SD card"
Step 12: Tap on Format ...
Now Enjoy 2.1 GB app storage with 410MB Mass storage....
Revert Back To JellyBean i9 Official
Click to expand...
Click to collapse
Video Tutorial (Not in English just watch the video and follow)
Smart Phone Flash Tool and Driver
Firmware Download
1. First of all download the required files.
2. Install Tinno Driver.
3. Extract All Zips. 1 file is missing in the firmware zip which is attached below named secro.img, add it in the firmware folder before proceed.
4. Run the Flashing Tool as admin (Right Click on the file and click on run as admin)
5. Select Scatter Loader from the firmware, wait till all files to load.
6. Select Firmware Upgrade.
7. Power off the cell phone and remove battery.
8. Now click on download and attach the cell phone without battery to data cable.
9. Wait till flash. You are done. :laugh:
10. Enjoy Stock JellyBean.
Add-ons
Click to expand...
Click to collapse
Click Here
Plese Hit thanks button if I helped you!
Click to expand...
Click to collapse
Frequently Asked Question (FAQ)
Click to expand...
Click to collapse
1. After I upgrade into kitkat firmware, can I downgrade again to Jellybean?
-Just flash dump rom of jellybean using spft.
2. I back up in CWM, Can I restore this in Kitkat version?
-No!
3.May I ask if we have custom recovery available for our kitkat version?
-Yes CTR
Credits
INCPAK
Biswajyoti
CallMeX!!
umangleekha
More Custom KitKat ROMs
You Must Be On KitKat To Flash These ROMs
Click to expand...
Click to collapse
ROM Links JellyBean 4.2
Click to expand...
Click to collapse
1. Huawei Honor 3C
2. Galaxy s5
ROM Links KitKat 4.4
Click to expand...
Click to collapse
1. KitKat Fresh v3 (4.4.2)
2. KitKat Emotion UI (4.4.2)
3. SlimKat Themed KitKat (4.4.4)
4. AOSP KitKat ROW (4.4.2)
5. Lenovo KitKat (4.4.2)
6. Android L Themed ROM
Procedure of Installation
Click to expand...
Click to collapse
1.Place Any ROM Zip File in your sdcard.
2.Wipe data/factory reset.
3.Wipe dalvik cache.
4.Flash ROM from sdcard.
5.Flash 4.4 Root.zip from attachment to get root access.
6.Enjoy.
Add-ons
Click to expand...
Click to collapse
Click Here
Note: Replace the boot.img in Fresh v3 to use Memory Card as default.
Click to expand...
Click to collapse
Credits
4pda.ru
Have you tried using titanium backup, go backup or lucky patcher after root genius because when i earlier flashed kitkat these apps weren't working and i had to revert back to jelly bean.
Edit: Thanks brother, all these apps are working after root genius. You've solved a big problem for me.
Add-ons
Add-ons
Click to expand...
Click to collapse
1.Best Keyboard In Town.
2a.Best Music Player In Town
2b.Music Player Add-on Patch
3.Best Camera App In Town
4.QMobile Stock Logo i9
5.Battery & Performance Patch
Procedure
Click to expand...
Click to collapse
1.Place Zip File in your SDCard.
2.Reboot Into Recovery.
3.Flash zip from sdcard.
4.Enjoy.
root genius failed.....when I flash CWM recovery it says PMT changed for rom
I alreay told in the post that flash the recovery with the ROM by replacing the included recovery
sorry my bad...tnks 4 reply
Always welcome
If you want to ask any question please ask on this forum only. Thanks
New i9 users must check this link
http://forum.xda-developers.com/showthread.php?t=2836748
Screen shots
qwerfaseeh said:
Before Installing the Official KitKat Follow These Steps.
1. Download MTK Droid Tool From Here
2. i9 must be rooted and USB debugging must be enabled before you proceed.
3. Attach the cell phone with data cable and run mtk droid tool as admin.
4. When device got loaded press the root button and grant root access on cell phone.
5. Click on IMEI/NVRAM button and click on backup.
6. Now in case after flashing u lost IMEI follow the same steps but now click on restore.
7. IMEI backup is a must thing.
8. Enjoy Official Release.
[/B]
Video Tutorial
1. Official KitKat Download
2. Smart Phone Flash Tool and Tinno Driver Download
3. Download the recovery file attached below.
4. Install Tinno Driver.
5. Extract All Zips.
6. Run the Flashing Tool as admin (Right Click on the file and click on run as admin)
7. Select Scatter Loader from the firmware, all files will be loaded now click on the address bar in front of recovery and select the recovery attached below.
8. Select Firmware Upgrade.
9. Power off the cell phone and remove battery.
10. Now click on download and attach the cell phone without battery to data cable.
11. Wait till flash. You are done.
12. Enjoy Offical KitKat.
1. Just Install PDA.Net+ Driver
2. Use the Genuine Root method.
3. No need to install the root.zip first
4. Just attach cell phone and run genuine root and click on Root button.
Click to expand...
Click to collapse
provide screen shots of whole phone
Root method has been updated, and a new custom ROM named CleanKat is added in the thread, check the first and 2nd post for the easiest and most proper working root.
Mustafa Chaudhry said:
provide screen shots of whole phone
Click to expand...
Click to collapse
added now check the 2nd post
qwerfaseeh said:
added now check the 2nd post
Click to expand...
Click to collapse
I flashed the attached file but root checker says not proper root what to do?
Is there any superuser app in the app drawer?
If yes then it is rooted dont worry u can confirm it with the lucky patcher and titanium backup
qwerfaseeh said:
If yes then it is rooted dont worry u can confirm it with the lucky patcher and titanium backup
Click to expand...
Click to collapse
Yes, there is and I reflashed the zip file again and its resolved and root checker is happy with it
So r u happy with this easy and proper root?
Also comment about the easiest IMEI backup method
if any one want to increase App storage which is almost 700 MB see first post
Use it only on Official KitKat and 2nd Custom ROM. Not with 1st custom ROM or with Official Leak on 1st Post.
Files Link are on my XDA Account Biography
Prerequisites:
-Bootloader Unlocked
-Copy the files "twrp-installer-daisy-3.2.3-0-offain.zip" and "ForcedEncryptionDisablerDaisy.zip" into the external memory card of the phone
How to install it:
1_ Download the files from the Dropbox link
2_ Extract "ADB" on a folder on C: (call the "adb" folder to facilitate the process )
3_ In the "adb" folder copy all the downloaded files
4_ Extract "daisy_global_images_V10.0.3.0.PDLMIXM_9.0.zip "
5_ On the device, activate the "developer options", then activate the "OEM unlock" and the "USB debugging"
6_ Open a Powershell window in the "adb" folder (Hold "Shift" and press the right mouse button ")
7_ Type " adb reboot bootloader"
8_ As soon as it is in "FASTBOOT" mode, go to the "daisy_global_images_V10.0.3.0.PDLMIXM_9.0" folder and click on the "flash_all.bat" file
9_ When completed, IMMEDIATELY return the phone to FASTBOOT mode (Power key + Key down)
10_ Type "fastboot boot twrp-daisy-3.2.3-0-offain.img
11_ When in TWRP, copy the "twrp-installer-daisy-3.2.3-0-offain.zip" and "ForcedEncryptionDisablerDaisy.zip" files to the SD card from the computer
12_ When the operation is completed, return to the home and go to REBOOT, and select BOOTLOADER
13_ Type "fastboot flash aboot aboot_9.6.4.img"
14_ Type "fastboot erase system"
15_ Type "fastboot erase userdata"
16_ Type "fastboot flash system lineage-16.0-20190313-UNOFFICIAL-treble_arm64_bvN.img"
17_ Type "fastboot flash userdata userdata.img"
18_ Enter TWRP (Press and hold power key + up key. When you turn it back on release the keys)
19_ Go to INSTALL and flash the "ForcedEncryptionDisablerDaisy.zip" file
20_ At the end of the operation, press REBOOT, and here is Lineage OS!
If the boot was successful:
1_ Download the Gapps
2_ Go into recovery
3_ Make a simple SWIPE TO FACTORY RESET
4_ At the end of the operation click on INSTALL and choose the Gapps
5_ Restart
6_ End!
If the memory should be reduced (example: the internal memory is only 8GB instead of 32GB)
1_ Go into recovery
2_ Go to WIPE, then ADVANCED WIPE
3_ Select System and press REPAIR OR CHANGE FILE SYSTEM
4_ Press RESIZE FILE SYSTEM and confirm
5_ Repeat the operation, selecting DATA
6_ Restart and enjoy the ROM!
Does "daisy_global_images_V10.0.3.0.PDLMIXM_9.0" contain the LOS image or the original one
What bugs to except
And I'm very thankful for your efforts
Mark7Aymn said:
Does "daisy_global_images_V10.0.3.0.PDLMIXM_9.0" contain the LOS image or the original one
What bugs to except
And I'm very thankful for your efforts
Click to expand...
Click to collapse
"daisy_global_images_V10.0.3.0.PDLMIXM_9.0" contains the original one
By now, the only issue is related to fingerprint sensor.
Your welcome bro!
Yay, finally! Thanks for the tutorial!
I have couple of questions:
1. How to execute flash all.bat if I'm using mac(platform tools)? Is the double click will work?
2. If I want to install magisk, can I just simply install it via twrp?
ghanipradita said:
Yay, finally! Thanks for the tutorial!
I have couple of questions:
1. How to execute flash all.bat if I'm using mac(platform tools)? Is the double click will work?
2. If I want to install magisk, can I just simply install it via twrp?
Click to expand...
Click to collapse
1. I test this method with windows. To avoid issues, try with the Windows PC or use a virtual machine
2. Yes, download the zip file and flash it from TWRP
Thanks for your appreciation?
ghanipradita said:
1. How to execute flash all.bat if I'm using mac(platform tools)?
Click to expand...
Click to collapse
There should be a flash_all.sh in there too that runs on Mac. Use the terminal. You need fastboot in your PATH.
Why would one go through all this trouble when there is a good gsi Lineage 16 here? I just tested it today and it works really well, specially with CAF kernel. Just the naming of the file is kind of weird, bvN instead of A/B. Besides, you don't need to erase all partitions, just system.
celrau said:
Why would one go through all this trouble when there is a good gsi Lineage 16 here? I just tested it today and it works really well, specially with CAF kernel. Just the naming of the file is kind of weird, bvN instead of A/B. Besides, you don't need to erase all partitions, just system.
Click to expand...
Click to collapse
Is another way to install it?
lukelab said:
Is another way to install it
Click to expand...
Click to collapse
yeah, the hard way
edit: i manage to fix finger print issue thanks to Bogdan Kyslenko
1. copy "10mount" to /system/etc/init.d ( rename "10mount.txt" to "10mount" before copy )
2. copy "plat_hwservice_contexts" to /system/etc/selinux ( rename "plat_hwservice_contexts.txt" to "plat_hwservice_contexts" before copy )
3. flash delfpgoodix.zip
4. reboot
enable Camera2 API make camera broken
After installing the Lineage 16 ROM my Xiaomi Mi A2 Lite doesn't see any SIM card! After back to stock Android One ROM it can't find the SIM too. What to do? Polish SIM card
F1nes said:
After installing the Lineage 16 ROM my Xiaomi Mi A2 Lite doesn't see any SIM card! After back to stock Android One ROM it can't find the SIM too. What to do? Polish SIM card
Click to expand...
Click to collapse
https://forum.xda-developers.com/mi-a2-lite/how-to/gsi-tweaks-fix-t3899630
you need install first fix from twrp
eremitein said:
https://forum.xda-developers.com/mi-a2-lite/how-to/gsi-tweaks-fix-t3899630
you need install first fix from twrp
Click to expand...
Click to collapse
Thx, its working now
CreateYourDream said:
edit: i manage to fix finger print issue thanks to Bogdan Kyslenko
1. copy "10mount" to /system/etc/init.d ( rename "10mount.txt" to "10mount" before copy )
2. copy "plat_hwservice_contexts" to /system/etc/selinux ( rename "plat_hwservice_contexts.txt" to "plat_hwservice_contexts" before copy )
3. flash delfpgoodix.zip
4. reboot
enable Camera2 API make camera broken
Click to expand...
Click to collapse
On my phone doesn't work
Being I already have twrp I'm on a custom ROM can I just wype n flash?
rob420p said:
Being I already have twrp I'm on a custom ROM can I just wype n flash?
Click to expand...
Click to collapse
Yes man?
lukelab said:
Yes man?
Click to expand...
Click to collapse
Thank u was making sure .I always try to use caution while modding.
FP-Fix already described, but what´s important for me, that I can use bt call to speak free in my car! Can anyone test, wheather it´s working here - in all other gsi´s except of havoc 2.0 it´s not working.
Btw. I already replaced qril-files and telephony-service with stock ones - no luck!
Voodoojonny said:
FP-Fix already described, but what´s important for me, that I can use bt call to speak free in my car! Can anyone test, wheather it´s working here - in all other gsi´s except of havoc 2.0 it´s not working.
Btw. I already replaced qril-files and telephony-service with stock ones - no luck!
Click to expand...
Click to collapse
someone reported what bt calls (inside car) works on AEX 6.4 by NFound with 9.6.11 base
https://androidfilehost.com/?w=files&flid=291423
eremitein said:
someone reported what bt calls (inside car) works on AEX 6.4 by NFound with 9.6.11 base
https://androidfilehost.com/?w=files&flid=291423
Click to expand...
Click to collapse
Thx, I will try!
Edit: Not working!