Related
i cant believe i did this but i have a sprint tp2 and i accidentally install the wrong rom, i installed 1.8b_Sense_2.5_2012_Full, and after the update the phone wont turn on so i cant even do the bootloader. and hard reset either, nothing is responding. is there any way i can get out of this with a working phone?? would the people at sprint be able to help? and please no smart ass comments im really bummed out about this right now
It should be ok if you only install a gsm rom. If you installed a gsm unlocker than it is bricked. Just push the bootloader buttons with the phone off. If it doesn't go to bootloader it is bricked.
i installed the rom but i think the damn thing CAME with the radio unlocker inside the rom. i cant get into bootloader...
please help
If you can't get into bootloader and it wont turn on it is bricked.
Not to hijack the thread, but on the subject of bricking the phone...
I tried to install Hard SPL using SSPL Manual (downloaded from a link on ppcgeeks.com). I ran it from the phone, and the screen blanked as normal, but no USB device was detected after doing so and the manual Hard SPL would not work either.
I tried to reset and remove the battery. The phone will not turn on, will not enter boot loader mode, nothing! EXCEPT for one thing, when I plug in USB now, it is detected as a Qualcomm CDMA Technologies MSM. No driver though (Win 7 or Win XP).
Is there any way to recover from this?
Hi!
Download and install this:
_ftp://up.ppcgeeks.com/Touch%20Pro%202/Stock%20ROMs/RUU_Rhodium_W_Sprint_WWE_1.21.651.3_RS_1.96WF_NV_SPCS_1.42_0430_PRL60652_Ship.exe
I think it help you.
ted2001 said:
Hi!
Download and install this:
_ftp://up.ppcgeeks.com/Touch%20Pro%202/Stock%20ROMs/RUU_Rhodium_W_Sprint_WWE_1.21.651.3_RS_1.96WF_NV_SPCS_1.42_0430_PRL60652_Ship.exe
I think it help you.
Click to expand...
Click to collapse
Hi, I have the exact same issue as the member above. I tryed to go to the ftp site you reccomended, but can't download. Can you please help! I cant sleep or think of anything else. Can't believe I did that to my phone.
go here and then to touch pro 2 stock roms. ftp://up.ppcgeeks.com/
Thanks for the replies.
I can't load the stock ROM since the phone is not recognized by ActiveSync. While you can see it when you connect USB, it isn't actually usuable as there is no driver loaded for it. And many drivers I've tried for it do not work either.
I did try [to install the ROM] though just to make sure there was no magic going on behind the scenes, but no go.
EDIT: Grammer fix
This mode was accidentally entered when I'm trying to boot my htc hd7 and press camera button together with volume up (around 20sec while the phone booting). For your information, my htc hd7 having problem with zune application and my device manager recognize it as unknown devices (yellow exclamation mark).
It was caused when I've sideloading USBModeSwitch.xap and change from ZUNE to DIAG mode. After the phone restarting, the apps has been revoke then i've no chances to install the apps again to fix it back to ZUNE mode.
Now the phone can operate as usual but cannot recognize by zune (yellow exlamation mark in device manager in PC).
The good news is, the phone had recognized by pc when entering this mode. and the devices manager detect the phone under Portable Devices -> Schubert. Can we sideloading apps using this mode? If yes... it was a good news for those having the same problem with me. But the question is.. HOW.
Note: After the incident, I already flash the phone. but still unable to be detected by ZUNE Desktop in normal state. it can operate, can install from market place as usual but cannot sync with zune desktop. Can somebody help me on this? Sorry for my English. You may refer with my attachment for the images and the XAP application.
Note 2: Never try the USBModeSwitch.xap if your phone is not fully unlock or will facing the same problem with me. hope someone can fix this issue. because lot of friends are stuck in this doom.
same problem here....
an hd7 too...
First, are your phones unlocked? I assume they are. Otherwise you wouldn't be able to deploy this USB-whatever.xap.
You may try deploying smth after running WPConnect (Phone has to be connected already). This small consoleapp does some funny stuff with the phone/PC connection. So maybe your devices will be recognized this way.
Best you start WPConnect from commandline, to have a look at the output, which should be smth like "[Devicename] successfuly connected..." or such.
C~
tried it, doesn't help
the phone is not unlocked anymore... that is the problem in my case ;-)
but i was able to install the HTC Diagnostic Drivers...
but i dont know if i can use it to disable Diag-Mode...
And you are not able to re-unlock your phone (via official or Chevron)? Have you tried to unlock after connecting - closing Zune - running WPConnect?
This is just a mere guess, but hey, who knows it maybe work
we cannot lock our devices as neither zune nor WPConnect realize that the phone is connected (because of it is in Diagnostic-Mode)
but thanks for your reply ;-)
Oberoth said:
we cannot lock our devices as neither zune nor WPConnect realize that the phone is connected (because of it is in Diagnostic-Mode)
but thanks for your reply ;-)
Click to expand...
Click to collapse
Yup that's true. I try to used ansar ROM, flash it, but nothing change. I wonder if we can custom a rom and implement the extract file of USBModeswitch.xap to the rom. so that the phone will boot with usbmodeswitch installed in it, using this step, we're able to switch the mode from diag back to zune.
This the final technique might can help for now. For the ROM, i can only break/extract until I've got the 2 OS file:- 2_os.nb.extra (±2.4MB) and the other one is 2_os.nb.payload (±181MB). Ok, until then, I was stuck. if not... we can extract the XAP directly to the OS folder, then repacking back the ROM. the 2_os.nb.payload file was unable to extract to bin file. Error shown:- "no boot partition". Maybe I'm using the old WinMo tools to extract it.
ahhh.... gosh... stuck in this step. any help and guide will be much appreciated.
AzmanIshak said:
Yup that's true. I try to used ansar ROM, flash it, but nothing change. I wonder if we can custom a rom and implement the extract file of USBModeswitch.xap to the rom. so that the phone will boot with usbmodeswitch installed in it, using this step, we're able to switch the mode from diag back to zune.
This the final technique might can help for now. For the ROM, i can only break/extract until I've got the 2 OS file:- 2_os.nb.extra (±2.4MB) and the other one is 2_os.nb.payload (±181MB). Ok, until then, I was stuck. if not... we can extract the XAP directly to the OS folder, then repacking back the ROM. the 2_os.nb.payload file was unable to extract to bin file. Error shown:- "no boot partition". Maybe I'm using the old WinMo tools to extract it.
ahhh.... gosh... stuck in this step. any help and guide will be much appreciated.
Click to expand...
Click to collapse
Hi,
from your writing i can read that you have the needed knowledge to make this thing...
so how long do you think will it take to get the two files...
and if you get these files, how can we flash that ROM without HSPL or SSPL?
thanks for your answer ;-)
our problem is... there's still no kitchen for WP7 (temporary). So.. we have to wait Da_G or Ansar.Ath.Gr work. they might have some tools that can help us. I knew.. lot of our friend already stuck in this mode as well. So... there's no sync with zune for us... no music transfer via usb.. and we have to forget all the thing that we can do using the USB cable except for charging it. lol~ how sick...
yeah...
i can only listen to radio in the morning when i drive to school...
i hate the most of the breakfast-shows
i have another idea instead of waiting for an C-ROM...
but that is only possible with a clean, Chevron-Unlocked and USB-Switch installed WP7 phone...
so nothing personally...
and we need to wait for the update...
the whole clean system would be backed up and could be used for our WP7 devices to get the USBSwitch-App onto our phone (holding camera-key when starting to install backup)
would be great if there is anybody who makes it...
hi
ask the autor of this http://forum.xda-developers.com/showthread.php?t=922000
maybe he can help ,his tool use usbmodeswitch.
im active in his thread too, but he didn't answer at all...
I have actally done this myself sadly the only option I had was to sync all my contacts with Windowslive and reset the HD7 by holding both volume keys while powering it on from a cold boot.
AzmanIshak said:
This mode was accidentally entered when I'm trying to boot my htc hd7 and press camera button together with volume up (around 20sec while the phone booting). For your information, my htc hd7 having problem with zune application and my device manager recognize it as unknown devices (yellow exclamation mark).
It was caused when I've sideloading USBModeSwitch.xap and change from ZUNE to DIAG mode. After the phone restarting, the apps has been revoke then i've no chances to install the apps again to fix it back to ZUNE mode.
Now the phone can operate as usual but cannot recognize by zune (yellow exlamation mark in device manager in PC).
The good news is, the phone had recognized by pc when entering this mode. and the devices manager detect the phone under Portable Devices -> Schubert. Can we sideloading apps using this mode? If yes... it was a good news for those having the same problem with me. But the question is.. HOW.
Note: After the incident, I already flash the phone. but still unable to be detected by ZUNE Desktop in normal state. it can operate, can install from market place as usual but cannot sync with zune desktop. Can somebody help me on this? Sorry for my English. You may refer with my attachment for the images and the XAP application.
Note 2: Never try the USBModeSwitch.xap if your phone is not fully unlock or will facing the same problem with me. hope someone can fix this issue. because lot of friends are stuck in this doom.
Click to expand...
Click to collapse
can you tell me what rom was on the phone and what rom you flashed After you F*****up your phone ?
I want to know what Radio was on it , I think that tool does something with the radio rom on the phone , it could help the flash an older rom using a goldcard with an older radiorom in it.
edit:
maybe it is the spl , try to flash a rom with a lower/higher spl number.
ceesheim said:
can you tell me what rom was on the phone and what rom you flashed After you F*****up your phone ?
I want to know what Radio was on it , I think that tool does something with the radio rom on the phone , it could help the flash an older rom using a goldcard with an older radiorom in it.
edit:
maybe it is the spl , try to flash a rom with a lower/higher spl number.
Click to expand...
Click to collapse
Hi Ceesheim, thanks for reply. I'm not remember my preveous ROM, by the way
currently only RUU_Schubert_hTC_Asia_WWE_1.23.707.01_Radio_5.51.09.06a_22.30.50.09U_Signed_by_ansar that can be flash to my phone.
AzmanIshak said:
Hi Ceesheim, thanks for reply. I'm not remember my preveous ROM, by the way
currently only RUU_Schubert_hTC_Asia_WWE_1.23.707.01_Radio_5.51.09.06a_22.30.50.09U_Signed_by_ansar that can be flash to my phone.
Click to expand...
Click to collapse
thats a modded rom (don't use it)
try this one :
http://forum.xda-developers.com/showthread.php?t=853945
Hi
i think the best way to fix your problem is this rom.
http://forum.xda-developers.com/showthread.php?t=948497
this one contain developer tools & can help you with usb problem.
send me a pm after install it an maybe we can fix this.
xboxmod said:
Hi
i think the best way to fix your problem is this rom.
http://forum.xda-developers.com/showthread.php?t=948497
this one contain developer tools & can help you with usb problem.
send me a pm after install it an maybe we can fix this.
Click to expand...
Click to collapse
ok... will test it now. thanks!
I'll report to you after complete. thanks again~
xboxmod said:
Hi
i think the best way to fix your problem is this rom.
http://forum.xda-developers.com/showthread.php?t=948497
this one contain developer tools & can help you with usb problem.
send me a pm after install it an maybe we can fix this.
Click to expand...
Click to collapse
I already download and install to my PC. but cannot flash to my phone.
Currently the only ROM that my HD7 can flash is with this number: 1.23.707.01
Make a goldcard and then flash it
Sent from my HD7 T9292 using Board Express
(I posted this in the guide to installing s-off etc etc but yeah I don't know if anyone's going to pay it any mind there :S If I was wrong to create this, I'm sorry ><)
Hi,
I keep getting a Communication interrupted error. I don't know if anyone else had this problem and can help me? I'm a n00b with this s-off thing and I triple checked with like 4 different websites to make sure I'm going the right way with this.
Doing this on Windows, I got the HTC driver, removed anything that would sync the phone to the computer, everything going well up until this point:
Zerging Root... this may take a minute or so..
Sending in Caroline...
Cleaning up...
Rebooting to fastboot...
Whien life gives you lemons, don't make lemonade. Make life take back the lemons
Waiting for fastboot...
Rebooting to fastboot (again)...
Communications with phone unexpectedly interrupted. Try Again.
Press (almost) any key to exit.
What's wrong with it?
also:
I put on the USB Debugging, I turned off Fastboot, and yes, I checked - it is still S-ON *sad*
HTC Sensation 4G (pyramid-1.17.0008, Android: 2.3.3, ROM version: 1.29.531.2)
I have tried with the fastboot on as well
As for these troubleshooting methods, I've been through it over and over:
Revolutionary Hanging on "Method 3"
1. Make sure you have installed all the drivers from above.
2. Please Make Sure you have HTC Sync uninstalled and Droid Explorer uninstalled.
3. Install These Drivers HERE:
4. Basically anything and everything that will allow your phone or other phones to automatically connect or sync to your computer has to be uninstalled
5. Try another Computer or Factory Reset your device as a last resort.
I've tried 3 different computers (I have no access to anyone who has a Linux computer) I've factory resetted my phone twice + my SD card. I really don't know what else to do
I've tried it in Charge Mode, and HTC sync mode as well.
Can anyone help me? :S
you have to do it in charge mode, make sure fast boot is off, and here is the tricky part, ANY app that could sync with the fone, needs to be uninstalled.
for me Zune kept messing with the install cuz it kept trying to sync...
Also, make sure your HBOOT is compatible with the version of revo you are using
so try this:
1) uninstall itunes (and other apple device software), zune, and any htc software (plus the stock drivers)
2) reboot
3) clean the registry (regclean or something similar)
4) reboot
5) reinstall stock drivers then plug in the phone (charge only) and let the pc detect the hardware.
6) unplug the fone and reboot the pc
7) NOW try to S-OFF, should work, this is the process i had to take
Thanks, i tried everything you told me and it still won't work. I'm running out of ideas. Isn't there another method I could go through so I can just flash a custom rom. Lol...
if its unbranded, you can try the HTC method, but im not a fan of their approach to it...revo is much more user friendly in the long run...
also have you tried disconnecting all usb devices other than the keyboard, mouse and phone? also try doing a battery pull and leave it out for 10-15 seconds, and give it another shot
also, what ver of revo u using? the latest? and whats your hboot?
EDIT nm, saw your hboot etc in your first post long night at work
also, this may be a super stab in the dark, try another cable if you have one, just try to eliminate any possible issue
This exactly what I had with my Win7 tappy lappy. Its the "sucky usb stack".
Then I used a win xp 32 bit machine no problems.
DJW6927 said:
This exactly what I had with my Win7 tappy lappy. Its the "sucky usb stack".
Then I used a win xp 32 bit machine no problems.
Click to expand...
Click to collapse
yeah, apparently win7 is giving different users this problem, i used WinXP SP2 32bit with no issues
Yup. Definitely related to Win7 64 bit version for me. Although the user didn't report what version they were using.
It's also worth remembering that all USB ports aren't all the same.
I have to use the ports on the front of this particular 32 bit XP workstation for some operations and the ports on the back for other. Magldr for my HD2 never works on the front.....
Like Rev say in their FAQ... there's something about the USB stack on windows that sucks. Not surprising really when we're talking about interop between such dissimilar operating systems (Android vs MS Win). Its gonna be a headache sometimes.
I'm on Win 7 32 bit, when I tested Revolutionary my device wasn't detected at all.
Rebooted many times, installed drivers and did lots of things and still nothing.
I changed USB port, and it worked xD
Try different USB ports and another USB Cable in-case
Gd luck
Edit: Just found out that you tried 3 different computers... Sorry then, if I come up with anything I'll tell you
Edit 2: Can't he try it on Safe Mode? Maybe it would help?
safe mose wont work, the usb stack works even less at that point :/ go windows!
worst case scenario, get a liveCD of ubuntu and boot it from BIOS, thats the easiest alternative to trying on windows
Solidus_n313 said:
safe mose wont work, the usb stack works even less at that point :/ go windows!
worst case scenario, get a liveCD of ubuntu and boot it from BIOS, thats the easiest alternative to trying on windows
Click to expand...
Click to collapse
Wow
Way to go Microsoft xD
I'm having the exact same problem as with the poster of this thread. I've tried a fresh install of xp sp3 via vmware on my macbook pro. I've also installed Ubuntu but can't even get the revolutionary.exe file to open. Linux is too foreign for me, can anyone help me with that?
I had to use HTC sync mode in order for it to work on Windows 7 64 bit.
Sent from my HTC Sensation 4G using Tapatalk
Run it 3 times, each step completes as normal and it'll say it's done
Hi Nelliel.. I had this problem bt got it working all well.... Here uninstall all drivers of htc... Htc sysc etc etc.... No matter what advices what...simply install htc sync and keep the folder of downloaded drivers on desktop.. now start the flashing after reboot it will ask for driver of android fone..do not do anythng to fone bt go to device manager and select the htc device with yellow exclamation select uninstall device and scan for changes and intall the device manually by directing it to drivers folder u downloaded...it will immidiately execute fastboot commands bt fails on 3 rd reboot. Now reboot fone and flash again this time it will go straight no probs...I hv tried on 7 fones works wow...
Note : make sure u download not exe bt open drivers files availavle in development section....cheerz
Sent from my HTC Sensation Z710e using XDA Premium App
lalitsehgal21 said:
Hi Nelliel.. I had this problem bt got it working all well.... Here uninstall all drivers of htc... Htc sysc etc etc.... No matter what advices what...simply install htc sync and keep the folder of downloaded drivers on desktop.. now start the flashing after reboot it will ask for driver of android fone..do not do anythng to fone bt go to device manager and select the htc device with yellow exclamation select uninstall device and scan for changes and intall the device manually by directing it to drivers folder u downloaded...it will immidiately execute fastboot commands bt fails on 3 rd reboot. Now reboot fone and flash again this time it will go straight no probs...I hv tried on 7 fones works wow...
Note : make sure u download not exe bt open drivers files availavle in development section....cheerz
Click to expand...
Click to collapse
listen to this, his situation was WAYYYYY worst than yours, and he got his fone working perfectly and S-OFF'd
By flashing, I assume you do mean using the revolutionary program? I will try this process a little later and will post results. Thank you
i also had this problem when i wanted to set my sensa s-off. i run the tool several times and i always got this error message. So then i plugged of the phone, plugged it on again and then the tool says my phone is already s-off.
i boot the phone into bootloader and yes, the phone was s-off, on top is the revolutionary text and the bootloader version is 1.17.1111
Problem: Cannot get my Samsung T959V to connect to the computer in order to flash/root. Always gives the same "USB Device Not Recognized" error when I plug it in to the computer.
My Progress: Before you guys throw this questions out, let me tell you what I have tried so far. I have been trying to get this damn thing connected to the computer for about 3 weeks now. I have sat down on my computer going through the xda forum in detail trying to find an answer. I know the process of flashing and the xda contributors have some great guides to help us along the way, a big thanks to all ur hard work, but no matter what, I cannot get the phone in download mode or get it connected to the computer.
* I have read the Download Mode post and tried all 5 ways without luck.
* Have read all things related to Keis Mini and how it sucks when it comes to the T959V and other ppl have had the same problem.
* Have tried connecting in Keis mode, usb debugging mode but still the same error.
If someone can help me get my phone connected to the computer, I am sure I can take of the rest since everything is available on the SGS4G Bible, thanks for that also.
Is there anything I have missed or not tried yet? Please help. Thanks in advance for anyone who reads this post as it is my first. Usually I don't have to post since all the documentation is always up-to-date and available but this problem is killing me
Additional Information: Bought the phone from a cell-phone store I use to work at. Has Android 2.3.6 on it. Have done the factory reset and tried to get it to connect, no luck. Not sure if it has been flashed before, pretty sure it hasnt but the flashed download mode method didnt work also. Have android-sdk installed and have tried pointing the .inf file to the google usb-drivers in the sdk, no luck. Download both 32-bit and 64-bit drivers for this phone from multiple locations, still no luck trying to connect. Have also tried multiple computers and multiple v9 cables, no luck.
Have you installed the Samsung drivers? You mention google drivers but samsung has it's own. You should be able to find them in the noobs guide to Odin thread. DL mode should work as well regardless of what drivers you have installed. Pull the battery, plug usb into computer, plug phone into usb, hold down BOTH vol + and -, insert battery. I've never not seen that method work.
hechoen said:
Have you installed the Samsung drivers? You mention google drivers but samsung has it's own. You should be able to find them in the noobs guide to Odin thread. DL mode should work as well regardless of what drivers you have installed. Pull the battery, plug usb into computer, plug phone into usb, hold down BOTH vol + and -, insert battery. I've never not seen that method work.
Click to expand...
Click to collapse
Yup tried both 32-bit and 64-bit drivers on multiple computers. Tried the download mode method u said also. Trust me have tried everything I have read about and know, but no luck.
But the phone charges fine? Could be a bad USB port. Or partially bad. Have you tried a jig? If that doesn't work I'd say your hardware is screwed up somewhere.
hechoen said:
But the phone charges fine? Could be a bad USB port. Or partially bad. Have you tried a jig? If that doesn't work I'd say your hardware is screwed up somewhere.
Click to expand...
Click to collapse
Yup it charges fine. Both when I plug it into the wall and the computer. What's a jig? Don't think I have tried that yet. If something can let me know for sure its a hardware problem, then I will stop obsessing over this, hahaha. Thanks for ur help btw.
A jig is a nifty little device that plugs in to your USB port on the phone and then gets you to DL mode. Their mostly used to recvover from bad flashes(like flashing the wrong phones kernel). Here's a link:
http://www.ebay.com/itm/Download-Mode-USB-Jig-Samsung-Omnia-7-Galaxy-S-4G-/250877662279
If your cheap like me or just wanna make it fast here's a guide to making your own.
http://forum.xda-developers.com/showthread.php?t=1604707
hechoen said:
A jig is a nifty little device that plugs in to your USB port on the phone and then gets you to DL mode. Their mostly used to recvover from bad flashes(like flashing the wrong phones kernel). Here's a link:
http://www.ebay.com/itm/Download-Mode-USB-Jig-Samsung-Omnia-7-Galaxy-S-4G-/250877662279
If your cheap like me or just wanna make it fast here's a guide to making your own.
http://forum.xda-developers.com/showthread.php?t=1604707
Click to expand...
Click to collapse
Awesome bro. I will see if I have time to make the jig, if not i will just order it.
Also, is there any way to flash/root without DL mode or USB debugging or using Keis? My recovery mode works but that's all. Was wondering if there was a way i could flash/root from the 'apply update from sdcard' option in the recovery mode?
Seems like a driver error have u tried one of the heimdall one clicks http://forum.xda-developers.com/showthread.php?t=1358498
They will put u back to stock with a modified rooted kernel .
If anything try and manually point to the drivers in device manager. Or download android sdk and use the google drivers ?
rangergiya said:
Also, is there any way to flash/root without DL mode or USB debugging or using Keis? My recovery mode works but that's all. Was wondering if there was a way i could flash/root from the 'apply update from sdcard' option in the recovery mode?
Click to expand...
Click to collapse
There was with Froyo but with GB it's all been put into the kernel. So not that I'm aware of. However one of the GB leaks changed the key mapping of the phone. I forget which one but that might be the issue. Go to settings>about phone>build number and let me know what that says. post the base band as well.
hechoen said:
There was with Froyo but with GB it's all been put into the kernel. So not that I'm aware of. However one of the GB leaks changed the key mapping of the phone. I forget which one but that might be the issue. Go to settings>about phone>build number and let me know what that says. post the base band as well.
Click to expand...
Click to collapse
As requested,
Build number: GINGERBREAD.VUVKJ6
Baseband version: T959VUVKJ6
Well that is the official GB release so now I officially have no idea why you can't get into DL mode. Get the jig and let me know if that works. Good luck.
hechoen said:
Well that is the official GB release so now I officially have no idea why you can't get into DL mode. Get the jig and let me know if that works. Good luck.
Click to expand...
Click to collapse
Will do. Thanks for ur help.
I downloaded the terminal emulator app and tried doing 'reboot download' but says 'operation not permitted,' any way to get around that? Or any other non-button or non-adb way to get into download mode? Other than the jig? Or is it possible to get su privileges on an unrooted device for the 'reboot' command to work in the terminal emulator app?
It's giving you "not permitted" because you don't have root. Have you tried Super One Click to root? If you can get SOC to root it you can use terminal to force DL mode.
If you haven't hears the link.
http://shortfuse.org/
DL 2.3.1. It should come with the android drivers as well. Worth a shot. If it doesn't work it doesn't damage the phone at all.
hechoen said:
It's giving you "not permitted" because you don't have root. Have you tried Super One Click to root? If you can get SOC to root it you can use terminal to force DL mode.
If you haven't hears the link.
http://shortfuse.org/
DL 2.3.1. It should come with the android drivers as well. Worth a shot. If it doesn't work it doesn't damage the phone at all.
Click to expand...
Click to collapse
Im trying it now but for SOC to work, i have to have the proper drivers to get my phone connected. Will see whether the drivers that come with SOC work for my phone.
No luck with the SOC 2.3.1 drivers. They r the same as the android-sdk drivers
Will try the jig. Hope it works.
Have you tried using this DRIVER SWEEPER to remove the drivers?
eollie said:
Have you tried using this DRIVER SWEEPER to remove the drivers?
Click to expand...
Click to collapse
And then what? I've tried to get the phone connected on multiple computers without any luck. Uninstall and reinstall didnt give me any results.
rangergiya said:
And then what? I've tried to get the phone connected on multiple computers without any luck. Uninstall and reinstall didnt give me any results.
Click to expand...
Click to collapse
Im sorry I am having mouse issues that deleted part of my response..
Sometimes a residual driver will not allow you to properly install the drivers. I had a LG driver from my old phone that was conflicting with Samsung driver.
Also this is a new root process. I do not know if it will work or not. But Hell its worth a try right?
http://forum.xda-developers.com/showthread.php?t=1652825&highlight=root
eollie said:
Im sorry I am having mouse issues that deleted part of my response..
Sometimes a residual driver will not allow you to properly install the drivers. I had a LG driver from my old phone that was conflicting with Samsung driver.
Also this is a new root process. I do not know if it will work or not. But Hell its worth a try right?
http://forum.xda-developers.com/showthread.php?t=1652825&highlight=root
Click to expand...
Click to collapse
Thanks for that link. I will try it out and give an update here.
rangergiya said:
No luck with the SOC 2.3.1 drivers. They r the same as the android-sdk drivers
Will try the jig. Hope it works.
Click to expand...
Click to collapse
Just to make sure you had usb debugging and allow non market apss both CHECKED right?
Hi guys,
First of all, i want to apologise for my english. Anyway , i have a huge problem whith my oneplus one.Two months ago, i flashed a wrong modem , the phone turn off and never restart again. I already tried all the method posted here, i changed my windows 7 for windows xp and windows 10, and no result at all. My main problem is that my laptop don´t even show the phone like qhsusb_bulk despite of al the drivers i try. In my case i think that only a kind of JTAG repair might work. I´m so desperate , what can i do?Tkns in advance for your help.
Anyone?
burebista001 said:
Anyone?
Click to expand...
Click to collapse
Please open a thread in the oneplus 2 forums
darshiz said:
Please open a thread in the oneplus 2 forums
Click to expand...
Click to collapse
Oneplus 2´s forum? Mine is oneplus one
burebista001 said:
Oneplus 2´s forum? Mine is oneplus one
Click to expand...
Click to collapse
does the phone do anything AT all when u try turn it on? get warm or anything? if not, hold power button for about a minute to make 100% sure (trust me, hold it for a long time) if still so sign of life, put it on charger for about 30 mins and then do the power again. IF STILL no sign, change cable and plug it into pc and if no luck, try different usb slots. and even better, try a different computer.
burebista001 said:
Oneplus 2´s forum? Mine is oneplus one
Click to expand...
Click to collapse
Oops read it wrong
burebista001 said:
Hi guys,
First of all, i want to apologise for my english. Anyway , i have a huge problem whith my oneplus one.Two months ago, i flashed a wrong modem , the phone turn off and never restart again. I already tried all the method posted here, i changed my windows 7 for windows xp and windows 10, and no result at all. My main problem is that my laptop don´t even show the phone like qhsusb_bulk despite of al the drivers i try. In my case i think that only a kind of JTAG repair might work. I´m so desperate , what can i do?Tkns in advance for your help.
Click to expand...
Click to collapse
One plus one will not hard brick, by flashing a wrong modem.. Anyway, please try to do the below steps:
1. Connect your phone to a wall charger(direct A.C current input) and charge it for atleast 16 to 18 hours, since it is not fully charged and used, sometimes it needs power thrust(battery mightve been cold).
2. Download factory image of the original firmware(search in XDA for Timma's guide, to return to opo stock)
3. Follow the procedure given in that guide.
4. If not, after charging, connect the phone in download mode and flash the factory image of the phone, which you have downloaded.
5. If all this fails, it might be a hardware issue, only RMA can help(service center) - if the phone is under warranty...
Hope this helps
Fix For Hard Bricked Oneplus One
Cheer Up Dude. There Is A Fix For Hard Bricked Oneplus One By netbuzz.
I too had once hard bricked my 1+1 by flashing a boot logo on cm12.1 and my device wouldn't turn on. When I press the power and volume keys it would only vibrate. I fixed it using netbuzz tutorial.
The fix is that you have to flash Color OS, and then you can flash the stock OS.
I am sorry I still can't submit links. But do check out on Google for the following.
[GUIDE] [UNBRICK] Unbrick Oneplus One by netbuzz.
Hit the Thanks Button if I have helped you. And if you are stuck anywhere in the process,don't hesitate to PM me.(!Warning! I might reply late.!EXAMS ARE GOING ON!).
Thank you guys. The problem whith my opo is that it don´t vibrate or anything when i press power+volum up and the laptop don´t see it like qhsusb_bulk. I allready tried to charge it 16-24 hours, connect it whith different cable, usb port and pc. I don´t know what can i do.
burebista001 said:
Thank you guys. The problem whith my opo is that it don´t vibrate or anything when i press power+volum up and the laptop don´t see it like qhsusb_bulk. I allready tried to charge it 16-24 hours, connect it whith different cable, usb port and pc. I don´t know what can i do.
Click to expand...
Click to collapse
DID YOU CHECK THE SOLUTION BY netbuzz for fixing bricked phones using COLOR OS
Mr.Jlu said:
DID YOU CHECK THE SOLUTION BY netbuzz for fixing bricked phones using COLOR OS
Click to expand...
Click to collapse
Of course, didn´t work
burebista001 said:
Of course, didn´t work
Click to expand...
Click to collapse
Did'nt work means?
Where you got stuck?
You have to be on Windows xp for the drivers to get detected.
Mr.Jlu said:
Did'nt work means?
Where you got stuck?
You have to be on Windows xp for the drivers to get detected.
Click to expand...
Click to collapse
Today i will upload images whith it, windows xp don´t see the opo.
burebista001 said:
Today i will upload images whith it, windows xp don´t see the opo.
Click to expand...
Click to collapse
Is it 16gb or 64 GB variant?
Hope you installed drivers from ColorOS.zip Only and before doing that uninstall all the drivers you had installed for one plus one.
If you don't mind me asking. Where are you from?
Mr.Jlu said:
Is it 16gb or 64 GB variant?
Hope you installed drivers from ColorOS.zip Only and before doing that uninstall all the drivers you had installed for one plus one.
If you don't mind me asking. Where are you from?
Click to expand...
Click to collapse
Is a 64 Gb variant and yes , i´ve installed the proper driver. I´m living in Granada , Spain.
burebista001 said:
Is a 64 Gb variant and yes , i´ve installed the proper driver. I´m living in Granada , Spain.
Click to expand...
Click to collapse
Check this out see if it helps..
https://forums.oneplus.net/threads/unbrick-oneplus-one.421775/
Mr.Jlu said:
Did'nt work means?
Where you got stuck?
You have to be on Windows xp for the drivers to get detected.
Click to expand...
Click to collapse
I used that guide several times on Windows 8.1. You don't have to be on Windows XP, there's an extra step to turn on some developer mode though
Sent from my A0001 using Tapatalk
Renosh said:
I used that guide several times on Windows 8.1. You don't have to be on Windows XP, there's an extra step to turn on some developer mode though
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Yes, for windows 8/8.1/10 you have to disable driver signature for installing thrid party drivers since they are not signed by the processor brands such as intel etc.
Do one thing, shoot a video while doing the process that is explained by netbuzz. Upload it and share the link.
Let us anazlyze what is going wrong.
And i dont mind if you parcel your Oneplus to me. I would be happy to uunbrick it and parcel it back to You.LoL
Guys, i´ve notice a thing.It seems the battery has like a deformation in his down-left part. Might be this the problem?
burebista001 said:
Guys, i´ve notice a thing.It seems the battery has like a deformation in his down-left part. Might be this the problem?
Click to expand...
Click to collapse
tbh mate, why would u take ur phone apart if drivers aint detecting lol? yes the battery doesnt look healthy IF it hasnt been taken out before (did u buy it new?) i dont see how a battery would just stop workin after installing a modem though. I had the same issue with my LG G2 with the drivers, turned out i installed them funny (i didnt run as administrator) you lit have to read step by step and make 100% u dont miss a step, and as the bloke said above DELETE OLD DRIVERS AND INSTALL NEW it makes a massive difference. Other than that, no idea pal. My phones cracked, holes on the back casing and battered with custom roms and its never given me a problem