Related
here is my problem guys. i was trying to flash my htc touch 2 sprint it with Raphaelhardspl(wrong flashing) and in the process the screen went blank. i was trying to do it one more time and my PC is asking for qualcomm cdmd technologies msn driver, every time i connect the phone to my PC. i have tried it soft reset. and hard reset wont work. any suggestion will be thanks full. thank you. the main problem is that my pc wont recognize ??
WHOEVER solve my problem will pay 50 buck via paypal
The quickest way to brick your phone is to try to flash it with programs meant for other phones, which it appears you have done.( bricked )
Try putting it into bootloader and flashing stock rom , or try mtty.exe, but if your pc won't recognize it and your screen shows no life, it is probably toast. Does it at least have hardspl on it . ?
yes it does have hardspl. there have to be a way that my pc will recognized it. i think.
As denco7 said, have you tried getting into the bootloader mode?
Hold volume down and press the red button with your stylus.
Connect your pro2 to your PC and if it connects the word 'serial' will change into 'USB'.
If it does, your device is not bricked.
I suggest you flash Hard-SPL again, and make sure to follow the instructions exactly! Don't think you can do it just in a minute, just take your time.
Then flash another ROM by using MTTY (see here) and there you'll get some instructions.
Good luck!
it wont go to boot loader mode, when i connect it to the pc it begin to charge and noting happen , then suddenly the light go off and the pc detect a driver is missing quaccom etc. does any one know about that this driver.
I've had that before... that the MSM technology qualcomm **** is asking for a driver.
There's a driver replacement (used before mtty). You can try to install that; altough I don't think it will help.
If you can't get into bootloader your device is (probably) bricked.
What you can also try is getting your battery, sd-card and simcard out of your phone and leave it for an hour. Then put the battery only back, and try to boot.
Does your phone start when you press the start button? So do you feel a vibrate or somethin like that?
no it wont start but maybe by following that MTTY my pc read it, i will try it. . it doesn even bibrate it just that power light show when that phone its charging thats all.
thanks for you comment guys.
That's strange.
There's one last thing you could try: the ultimate hard-reset
Some time ago I bricked my diamond. I tried all available sofkey combinations.
Then, suddenly, my device vibrated like 3 tiimes very loudly.
It didn't still boot nor go into bootloader.
But after about 4 hours it booted!
I only don't know what the combination was... something like VOl UP + VOL DWN + lOCK BUTTON + RESET.
Just try some combinations, maybe it works for you.maybe not, but you could try it.
So the phone is still pretty new, not much was installed on it at all except Root/SuperUser. There were a few other apps but they are just games. What happen is I did the RyanZa LagFix mod by Tayutama and at first I couldn't put the phone into recovery mode. Later I found out that I had a newer batch of the Samsung Vibrant where the volume up + volume down + power function has been disable by Tmobile so I had to try another method to get into recovery mode. What I did was I use abd/androidSDK to get my phone to reboot into recovery mode and followed all the instruction for the RyanZa Lag Fix . So the installation of packages works and the phone booted up. Then I went into MRC Script to proceed to the next step. Here is where I had the problem . The phone took a really really long time to create the 1gb file to extract file and then it ran a long list and kept going back to "creating a 1GB storage file" over and over again. So i just thought i'll leave it alone to do its thing. The process took so long and then it froze.... I had no choice but to restart it. When restarting, all i get is the vibrant screen, then I hear the sound to the Galaxy S screen but I don't see the Galaxy S screen . After that the screen is totally blank and dark, the 4 sensitive touch button still lights up though. After all the light went out, if I touch the screen the sensitive touch buttons still lights up again but nothing on the screen or sounds. I guessing that my phone got Bricked! I looked all over for help to recover my phone because I see some users did it using ODIN. However, I can't use ODIN because I cant put my phone into download or recovery mode since Tmobile took out the fuction of "holding volume up +volume down then press power" to get into recovery or download mode. The only way I could got in before was through adb/SDK but now that doesn't work because the phone isn't booting up. Is there anyways I can solve this issue or is my phone totally dead? =( please help if anyone know how or had similar issue. I've done this with my brother's Vibrant later and it works fine for him because his Vibrant is the older batch with the "volume up +volume down +power" function still enable. Much appreciation to all the help I can get from everyone. Thank you!!!
Methods I've tried to get the phone into recovery/download mode:
1. take battery out, plug usb in, put battery back in hold up (also tried down) and then press power.
2. I've tried volume up + volume down + power wait for vibrant logo to flash 1 time (also tried 2 flash and 3 flash).
3. I've tried the same methods above and holding it for a long time as well.
I did all the above methods when the phone is off so the only thing that it did for me was flashing the vibrant screen once, then the battery show up with a spinning waiting sign... It didn't put my phone into any type of special mode at all. I hope some of this information would help most of you get an idea where my phone situation is at. =(
have the same problem
someone please help! very much appreciated
Similar issues... I can only enter the "Vibrant Samsung" screen...
Press Volume up + Volume down + power, the logo just blinks, no recovery mode.
I also tired what others said, like plug the usb, open Kies, still can not enter recovery mode.
This happen to me.... take of ur battery n put it back on n make sure ur usb is connected to ur computer n have ur cmd on to.... ( u must have Samsung usb drive install to have it work.... or if u root ur phone using cmd or what so ever called...)
As soon as ur phone boot up ur computer should make a sound that its connect to ur phone ....than type
cd/
cd /AndroidSDK/tools
same situation!!
zzzzomg i'm stuck in the same exact situation!! please help!!
i was following a step by step instructional video for fixing lag on youtube and i went thru the steps just fine. but then decided to re-do the process because i thought I missed a step....so when i went to MCR to run the lag fix and waited for the 1g thing to be made, my screen locked out (after 30 seconds) then it wouldn't load up the screen. So I took out the battery and rebooted my phone, and it gets stuck at the vibrant S screen. AHHHHH Please help!!
Insert battery, Plug in usb, vol up + power. Took me straight to download mode
I really need help with this two. My phone goes into the S logo than goes black and the 4 lights come up on the bottom. Please Help someone
I had the same problem, solved it by booting into samsung recovery and wiping user data, new it was voodoo and I couldn't get into the phone to disable lagfix, wiped user data and voodoo noticed upon reboot with Linda narrating the redo of the lagfix. Btw I did it to myself by battery pull, the first start takes an amazingly long amount of time.
Sent from my SGH-T959 using XDA App
If you can not trigger the download mode and have the [ Phone < ! > Computer ] picture on your screen, the phone is bricked!
I tried the resistor trick, that did not trigger the download mode.
illtemperedian said:
Insert battery, Plug in usb, vol up + power. Took me straight to download mode
Click to expand...
Click to collapse
illtemperedian you're my hero!!!! thx!!!
I am having the same problem. I am on the phone ! computer screen and i cannot get back to download mode. HELP!!! I tried the button combos but nothing seems to work. I tried Odin anyway and it seem to be downloading in that phone ! computer screen but it stops at the factory part.
stuck on samsung vibrant boot up screen
how do i get out of the samsung vibrant boot up screen?
looks like to me it's time for new one. if you bought it from tmobile you do have factory 1 year warranty.
when I try to flash to recovery it says:
RST_STAT = 0x1
PMIC_IRQ1 = 0Xe8
PMIC_IRQ2 = 0X0
PMIC_IRQ3 = 0X1
PMIC_IRQ4 = 0X0
PMIC_STATUS1= 0Xc0
PMIC_STATUS2= 0x2c
The volume and power keys don't do anything ether.
Please help.
what download mode? the icon in loading status?
sama here i have done alot of vibrant's but today a customer came with a pattern lock vibrant and it wont let me go to download mode.. ugh it suxs
Obviously some of you guys are hardware locked http://forum.xda-developers.com/showthread.php?t=804305 there's a link for the VIBRANT fix!
Sent from my T959 using XDA App
Hi, I've got a little sceary problem with my desire s.
I installed reaper v 1.2 ROM, configured it, everything was ok. But now phone is not responding. Only black screen. I tried vol up/down and power button configuration - nothing happend. I connected phone to the charger and led turned on, I tred the same configuration - nothing happend. I discconnect phone - led is still on and phone is not responding.
I downloaded latest android sdk tools, latest htc drivers, installed, connected phone to computer, run sdk tool and type adb reboot recovery - error device not found.
When I connect phone to computer it found Qualcomm CDMA Technologies MSM, I try to install soft automaticly but comp find nothing.
Wha else I can do? I don't want pull battery. I have never done it.
Help, please.
adix631 said:
Hi, I've got a little sceary problem with my desire s.
I installed reaper v 1.2 ROM, configured it, everything was ok. But now phone is not responding. Only black screen. I tried vol up/down and power button configuration - nothing happend. I connected phone to the charger and led turned on, I tred the same configuration - nothing happend. I discconnect phone - led is still on and phone is not responding.
I downloaded latest android sdk tools, latest htc drivers, installed, connected phone to computer, run sdk tool and type adb reboot recovery - error device not found.
When I connect phone to computer it found Qualcomm CDMA Technologies MSM, I try to install soft automaticly but comp find nothing.
Wha else I can do? I don't want pull battery. I have never done it.
Help, please.
Click to expand...
Click to collapse
Don't panic brother. I've been in a similar situation many times. Whatever you do... DO NOT PULL THE BATTERY till the phone is switched off!!
Just disconnect the phone from the laptop or wall socket (remove the usb cable from the phone) and leave the phone. Don't sit and stare at it, and don't try to reason it into rebooting. Also, stop pestering God...he doesn't do phones. (I think) Just relax, and go watch T.V. or something.
One out of two things may happen :
1. It may reboot on it's own. Has happened to me... Sometimes it happes in 5 mins, sometimes in 20, and sometimes, never.
2. The battery will eventually run out of charge and your phone will switch off by itself. Now remove the battery, reinsert after 2 mins and boot up into recovery. From here, you can restore your previous nandroid backup.
P.S. If you do not have a nandroid backup, just reflash the ROM after a full format ("format all partitions, except sdcard" option in recovery). Note that if you have unlocked using HTC site, this will not work until you manually flash boot.img (you can find it in the ROM (Reaper_v1.2.zip) file) from fastboot.
Let me know what happens.
Now I' still waiting, without phone touching. Led is ON (orange colour). Phone is disconected (and me too ). Battery level was 13% before this insydent.
When LED will turn off (I don't know when) I'll reinsert battery and let you know what's up.
I hope, I did't bricked it...
adix631 said:
Now I' still waiting, without phone touching. Led is ON (orange colour). Phone is disconected (and me too ). Battery level was 13% before this insydent.
When LED will turn off (I don't know when) I'll reinsert battery and let you know what's up.
I hope, I did't bricked it...
Click to expand...
Click to collapse
Don't worry. I am virtually a 100% sure you have NOT bricked it.
Just don't panic and let the phone switch off first.
BTW, you didn't say if you unlocked your bootloader with HTC Dev site or Revolutionary?
Do you have a Nandroid backup of your previous ROM ?
How new are you to all this (flashing etc)?
Is this the first custom ROM you have flashed on this device?
enigmaamit said:
Don't worry. I am virtually a 100% sure you have NOT bricked it.
Just don't panic and let the phone switch off first.
BTW, you didn't say if you unlocked your bootloader with HTC Dev site or Revolutionary?
Do you have a Nandroid backup of your previous ROM ?
How new are you to all this (flashing etc)?
Is this the first custom ROM you have flashed on this device?
Click to expand...
Click to collapse
My phone was s-off by xtc clip (I did't use revolutionary), boot loader was unlocked on HTC Dev site.
I flashed at first CMW recover, than 4EXT Touch recovery and used it.
I tried a lot of roms, virtuous, endymnion, runny. The best for the beast was CM7.1, nightly. I flashed it month ago and updated succefully. Two days ago I decided to try REAPER. I wiped cache and dalvik's, than flashed reaper v 1.1. Today I updated it to 1.2 version (the same way as always) and I had a problem with dialer, so I wiped everything. Format all ex. sd card was done and I flashed reaper 1.2. I confogured it, just I like (set a new gov reaper, freq 118 (I don't remember) low and 1074 high) and thats it. I tried laucher, sms, phone and thats all.
adix631 said:
My phone was s-off by xtc clip (I did't use revolutionary), boot loader was unlocked on HTC Dev site.
I flashed at first CMW recover, than 4EXT Touch recovery and used it.
I tried a lot of roms, virtuous, endymnion, runny. The best for the beast was CM7.1, nightly. I flashed it month ago and updated succefully. Two days ago I decided to try REAPER. I wiped cache and dalvik's, than flashed reaper v 1.1. Today I updated it to 1.2 version (the same way as always) and I had a problem with dialer, so I wiped everything. Format all ex. sd card was done and I flashed reaper 1.2. I confogured it, just I like (set a new gov reaper, freq 118 (I don't remember) low and 1074 high) and thats it. I tried laucher, sms, phone and thats all.
Click to expand...
Click to collapse
Well in that case, don't worry your phone is safe. Just wait for it to switch off. Then after booting into recovery, just restore the last working ROM backup that you have. Don't flash the Reaper 1.2 that you downloaded till you have confirmed that the md5 checksum matches the one posted by Lowveld.
Hmm. Strange.
Phone turned off - LED was off, so I pulled battery, wait 2-5 minutes (without battery) and tried to turn it on. I saw a black screen. I press vol up/down power buttons, phone vibrated 3 times (quick) and I saw a green LED. I tried turn it on (with vol down button and without it) - nothing. I waited a while then a Led turned off.
I pluged device to the charger - orange led started blinking, so I tried to on phone - nothing. I restarted it (3 buttons) - it vibrated 3 times quickly and the same story from my first post.
Phone is unplugged, orange led is on (not blinking) and no react.
Any ideas??
Can you still boot to recovery?
adix631 said:
Hmm. Strange.
Phone turned off - LED was off, so I pulled battery, wait 2-5 minutes (without battery) and tried to turn it on. I saw a black screen. I press vol up/down power buttons, phone vibrated 3 times (quick) and I saw a green LED. I tried turn it on (with vol down button and without it) - nothing. I waited a while then a Led turned off.
I pluged device to the charger - orange led started blinking, so I tried to on phone - nothing. I restarted it (3 buttons) - it vibrated 3 times quickly and the same story from my first post.
Phone is unplugged, orange led is on (not blinking) and no react.
Any ideas??
Click to expand...
Click to collapse
Well, the blinking signifies inadequate charge for a bootup. Wait till the orange LED stopsa blinking and turns on constantly... then boot into bootloader (Voulme up and Power button - don't let go of the volume button even after releasing the power button) - I don't want you to restart by using three button combo...otherwise you'll be back to the same problem, trying to boot into a broken OS... Just disconnect again and wait for it to switch off.... then reinsert battery, connect to charger, then wait for the LED blinking to stop. Have a little patience! and DON"T RESTART with three button combo. Just boot into bootloader with Voulme up + Power key.
You have to follow these instructions carefully, exactly as i have written. Report back what happens.
enigmaamit said:
Well, the blinking signifies inadequate charge for a bootup. Wait till the orange LED stopsa blinking and turns on constantly... then boot into bootloader (Voulme up and Power button - don't let go of the volume button even after releasing the power button) - I don't want you to restart by using three button combo...otherwise you'll be back to the same problem, trying to boot into a broken OS... Just disconnect again and wait for it to switch off.... then reinsert battery, connect to charger, then wait for the LED blinking to stop. Have a little patience! and DON"T RESTART with three button combo. Just boot into bootloader with Voulme up + Power key.
You have to follow these instructions carefully, exactly as i have written. Report back what happens.
Click to expand...
Click to collapse
I did it exactly like you've written. Waited till phone, switch off, connected it and charged till led stopped blinking, disconnect, and try to boot it into recovery (vol up + power). Phone wibrated 3 times (screen did't react) and the same story. Now waiting for discharging and I'll try again.
Anyway thanks for your help and interest.
What else I can do? If the phone is not responding I can send it to warranty service. Meybe they will honour it... If not...ehss very expensive play.
adix631 said:
I did it exactly like you've written. Waited till phone, switch off, connected it and charged till led stopped blinking, disconnect, and try to boot it into recovery (vol up + power). Phone wibrated 3 times (screen did't react) and the same story. Now waiting for discharging and I'll try again.
Anyway thanks for your help and interest.
What else I can do? If the phone is not responding I can send it to warranty service. Meybe they will honour it... If not...ehss very expensive play.
Click to expand...
Click to collapse
Well, it that's not workin, Wait till the phone switches off again. Then configure adb, make sure it detects your device (use the command: adb devices) and then type the following at the cmd prompt :
adb reboot recovery
This should take you to recovery.
Ok, what can I say? Youe last thread worked!! I restared device, connect to computer - it was found as usb disk. In sdk tool divece was also found, this time as my ds Just restarted a recovery. First I saw an error in 4ext recovery, but it started with orange letters. I wiped all, formated all, recover old system, restart phone. And it works! Now I flshesd last jorgens CM7 and starting to config my phone. But a heart attack was close... Thanks man
adix631 said:
Ok, what can I say? Youe last thread worked!! I restared device, connect to computer - it was found as usb disk. In sdk tool divece was also found, this time as my ds Just restarted a recovery. First I saw an error in 4ext recovery, but it started with orange letters. I wiped all, formated all, recover old system, restart phone. And it works! Now I flshesd last jorgens CM7 and starting to config my phone. But a heart attack was close... Thanks man
Click to expand...
Click to collapse
You're welcome brother! And Congratulations!!
I know what you must have gone through till you reclaimed your phone. I remember the first time i was in a situation like yours... had to figure out this discharge the phone, LED blinking etc... thing on my own..., everyone else said battery pull was my only option. But i sitll didn't do it. I had around 60% battery remaining before this happened, so you can only imagine how many sleepless hours i spent waiting for the damn battery to run dry. http://forum.xda-developers.com/showthread.php?t=1271360
The important thing is to resist the temptation of pulling battery. Everything can be salvaged if you don't do that, but once you fry your eMMC, there is nothing anyone can do without physically repairing the phone.
May I suggest you edit the topic your OP and add the word [SOLVED] to the title. This will ensure anyone in trouble can easily locate this thread out of the cacophony on xda!
Hello, I am trying to help my friend unbrick his phone.
All I know is that he was trying to use a one click root program and after several reboots the phone would no longer boot. It vibrates three times and flashes an orange light.
If I plug the phone into my computer, clockwork mod recovery with the words "ace hack kit" will show up. I tried wiping data, cachce, etc. and installing Android Revolution HD.
On my computer, if I type "adb devices" then it will show H13142452345 recovery.
If I type adb reboot bootloader the phone will vibrate three times and flash the orange light.
When the phone is plugged into my computer during the blinking orange light, then my computer says "device drivers not found for Qualcomm MSM"
I have also tried booting the phone with the sd card and SIM card removed.
Can anyone help?
Thank you.
**************SOLVED******************
The problem was that my volume buttons were broken. Once I destroyed the ribbon cable connecting the volume buttons to the motherboard, the phone booted up just fine.
azndan2 said:
Hello, I am trying to help my friend unbrick his phone.
All I know is that he was trying to use a one click root program and after several reboots the phone would no longer boot. It vibrates three times and flashes an orange light.
If I plug the phone into my computer, clockwork mod recovery with the words "ace hack kit" will show up. I tried wiping data, cachce, etc. and installing Android Revolution HD.
On my computer, if I type "adb devices" then it will show H13142452345 recovery.
If I type adb reboot bootloader the phone will vibrate three times and flash the orange light.
When the phone is plugged into my computer during the blinking orange light, then my computer says "device drivers not found for Qualcomm MSM"
I have also tried booting the phone with the sd card and SIM card removed.
Can anyone help?
Thank you.
Click to expand...
Click to collapse
First, you shouldn't have used a root program that does not support your device. The only efficient rooting method to the moment is the Hack Kit. Anyway. Try reverting your phone to stock using the hack kit. You shouldn't have wiped data also as you have probably disabled USB debugging. If you can't revert it to stock with the hack kit, then your best choice is to hit the IRC channel and ask for help. The guys there know the business and might be able to help. Hope you.can sort the issue out.
Sent from my Inspire 4G using XDA App
Thanks. I'm not sure what program he was using to try to root the phone, my guess is that he was using the ace hack kit because the recovery on his phone says "ace hack kit" on it. Thanks for the tip on going to the IRC.
You've bricked it, I believe the phone is now in Qualcomm's Diagnostic dload mode.
Confirmed, you're in Qualcomm's Diagnostic mode.
My suggestion is to try and find a PD98IMG file that flashes everything to stock, use a clean FAT32 sd card, put it in the phone, and then try to see if it'll flash it when you press volume-down and power. Apparently that should give you five vibrations, then after 5 minutes, press volume up to let it vibrate once, then spend about another 10 minutes before pressing volume up one more time.
Thanks for the reply Hunter. I've tried a variety of button combinations and methods to try to get it to boot into the five vibration green light mode. Unfortunately, no matter what button combination I press I can only get it into 3 vibration orange light mode.
Did you attempt the Hack kit ?
Help please
Im in a dire situation, what do I do. Could some one give me a step by step explanation??
Thank you that would be a big help
it vibrated 5 times and i have a green light, for a while the battery charging thing came up, what do I do??????
I can not help you now, but as a last resort could find a technician and ask for "medusa box"(search in crome explorer). I have this device and I'm back to life a dozen android devices completely bricked, and the htc inspire 4g is fully supported by medusa box, luck
Hello to everyone. I beg your help, please. I bought this amazing second hand tablet last friday. At the first attemp, and because I didn't want to read all the threads, I bricked the tablet. Yes, stupid thought, I know.
Because I wasn't happy with the result, I wiped all and delete bootloader, system, data... Everything. I know something with Microsoft issues and brave me (and silly) I thought It was similar, that I could start from outside of the tablet even if it was blank.
Anyway, the facts are:
The tablet is allways on, in APX mode. When I press down the power boton, it reboot. I know because when it's conected to my laptop, I can see the USB interface conected and the APX mode on it.
The screen is allways in black. ALLWAYS. No matter if I try to start in recovery in bootloader or any other way to start the system. Black, nice black.
Of course, no result in Power + Vol up, Power + Vol -, pressing power during 3 hours and 23 minutes... (I'm joking), but for long.
The only signal by which I know that it's not dead at all its when I conect the charger. I can see the small orange light in the power buton saying: "I'm alive"
Ok, I don't know what to do. I've read during the weekend as much as I could, tried evrything and nothing fixed. If it helps, before playing to be God, I had Android 4.0.1, I unlocked the bootloader with the apk, I installed the TWRP recovery and everything were right until I wanted to update the rom. Some mystakes that I don't remember and this is what I can tell you. Any holy soul which can help me, please? If not, can anyone help me? Thank you and I'll be looking forward your help.
evoin said:
Hello to everyone. I beg your help, please. I bought this amazing second hand tablet last friday. At the first attemp, and because I didn't want to read all the threads, I bricked the tablet. Yes, stupid thought, I know.
Because I wasn't happy with the result, I wiped all and delete bootloader, system, data... Everything. I know something with Microsoft issues and brave me (and silly) I thought It was similar, that I could start from outside of the tablet even if it was blank.
Anyway, the facts are:
The tablet is allways on, in APX mode. When I press down the power boton, it reboot. I know because when it's conected to my laptop, I can see the USB interface conected and the APX mode on it.
The screen is allways in black. ALLWAYS. No matter if I try to start in recovery in bootloader or any other way to start the system. Black, nice black.
Of course, no result in Power + Vol up, Power + Vol -, pressing power during 3 hours and 23 minutes... (I'm joking), but for long.
The only signal by which I know that it's not dead at all its when I conect the charger. I can see the small orange light in the power buton saying: "I'm alive"
Ok, I don't know what to do. I've read during the weekend as much as I could, tried evrything and nothing fixed. If it helps, before playing to be God, I had Android 4.0.1, I unlocked the bootloader with the apk, I installed the TWRP recovery and everything were right until I wanted to update the rom. Some mystakes that I don't remember and this is what I can tell you. Any holy soul which can help me, please? If not, can anyone help me? Thank you and I'll be looking forward your help.
Click to expand...
Click to collapse
Are you able to access fastboot? If so, flash the STOCK ASUS 4.0.1 Rom again. The mistake I think you made was flashing a ROM not compatible with the bootloader you have. You first have to update the bootloader to 4.1.1 or 4.2.1 to flash any of the current ROMS.
No fastboot, no bootloader update.
cmendonc2 said:
Are you able to access fastboot? If so, flash the STOCK ASUS 4.0.1 Rom again. The mistake I think you made was flashing a ROM not compatible with the bootloader you have. You first have to update the bootloader to 4.1.1 or 4.2.1 to flash any of the current ROMS.
Click to expand...
Click to collapse
Thanks for the reply:
I can't access fastboot. The tablet does nothing, just allways on in APX, so I can't update the bootloader. Neither I can't switch it off. I've read smething about run out the battery and start a process with ODIN?
I haven't tried it before, but maybe there's a way to create a bootable SD that will automatically install one of the stock ROMs so you can start over again?
If you can't get to the bootloader/fastboot/recovery and only have APX and no back upped NVFlash files then I think you are bricked unfortunately
hi is there any solution to solve this problem, or tablet dead
I'm in the same situation! :crying:
no solution???
Same story
Same here -- black screen, PC recognizes it as an APX device, but neither fastboot nor adb seem to work.
I didn't even try to mod mine. I was just using it normally, and it crashed, and now all it does is give me a black screen. When I poke the reset button, my PC notices the device disconnection and then a minute later it re-connects, but still nothing.
Holding down volume up/down during reset does nothing. Holding down power, with or without volume buttons, for an extended period does nothing.
This looks to be like an epidemic problem for these devices. Has nobody gotten a handle on it yet?
pty
I am also in your situation.
I have a tablet with Tegra xperia 3, black screen! APX mode only!
Does not read any adb and fastboot driver!!
There are new?
Hi everyone,
for me now the same situation. Only APX aviable. no fastboot ect...
pls help me solve this issue.
Thanks a lot.
Turn on in APX-Mode. You won't see anything on the screen, the display does not turn on.
If you connect the USB cable to a Windows PC, Windows will recognize it as an APX device.
On this mode you may use nvflash tool http://forum.xda-developers.com/showthread.php?t=1969797.
If nothing works, you should exchange the Mainboard!