Hi, I've got a little sceary problem with my desire s.
I installed reaper v 1.2 ROM, configured it, everything was ok. But now phone is not responding. Only black screen. I tried vol up/down and power button configuration - nothing happend. I connected phone to the charger and led turned on, I tred the same configuration - nothing happend. I discconnect phone - led is still on and phone is not responding.
I downloaded latest android sdk tools, latest htc drivers, installed, connected phone to computer, run sdk tool and type adb reboot recovery - error device not found.
When I connect phone to computer it found Qualcomm CDMA Technologies MSM, I try to install soft automaticly but comp find nothing.
Wha else I can do? I don't want pull battery. I have never done it.
Help, please.
adix631 said:
Hi, I've got a little sceary problem with my desire s.
I installed reaper v 1.2 ROM, configured it, everything was ok. But now phone is not responding. Only black screen. I tried vol up/down and power button configuration - nothing happend. I connected phone to the charger and led turned on, I tred the same configuration - nothing happend. I discconnect phone - led is still on and phone is not responding.
I downloaded latest android sdk tools, latest htc drivers, installed, connected phone to computer, run sdk tool and type adb reboot recovery - error device not found.
When I connect phone to computer it found Qualcomm CDMA Technologies MSM, I try to install soft automaticly but comp find nothing.
Wha else I can do? I don't want pull battery. I have never done it.
Help, please.
Click to expand...
Click to collapse
Don't panic brother. I've been in a similar situation many times. Whatever you do... DO NOT PULL THE BATTERY till the phone is switched off!!
Just disconnect the phone from the laptop or wall socket (remove the usb cable from the phone) and leave the phone. Don't sit and stare at it, and don't try to reason it into rebooting. Also, stop pestering God...he doesn't do phones. (I think) Just relax, and go watch T.V. or something.
One out of two things may happen :
1. It may reboot on it's own. Has happened to me... Sometimes it happes in 5 mins, sometimes in 20, and sometimes, never.
2. The battery will eventually run out of charge and your phone will switch off by itself. Now remove the battery, reinsert after 2 mins and boot up into recovery. From here, you can restore your previous nandroid backup.
P.S. If you do not have a nandroid backup, just reflash the ROM after a full format ("format all partitions, except sdcard" option in recovery). Note that if you have unlocked using HTC site, this will not work until you manually flash boot.img (you can find it in the ROM (Reaper_v1.2.zip) file) from fastboot.
Let me know what happens.
Now I' still waiting, without phone touching. Led is ON (orange colour). Phone is disconected (and me too ). Battery level was 13% before this insydent.
When LED will turn off (I don't know when) I'll reinsert battery and let you know what's up.
I hope, I did't bricked it...
adix631 said:
Now I' still waiting, without phone touching. Led is ON (orange colour). Phone is disconected (and me too ). Battery level was 13% before this insydent.
When LED will turn off (I don't know when) I'll reinsert battery and let you know what's up.
I hope, I did't bricked it...
Click to expand...
Click to collapse
Don't worry. I am virtually a 100% sure you have NOT bricked it.
Just don't panic and let the phone switch off first.
BTW, you didn't say if you unlocked your bootloader with HTC Dev site or Revolutionary?
Do you have a Nandroid backup of your previous ROM ?
How new are you to all this (flashing etc)?
Is this the first custom ROM you have flashed on this device?
enigmaamit said:
Don't worry. I am virtually a 100% sure you have NOT bricked it.
Just don't panic and let the phone switch off first.
BTW, you didn't say if you unlocked your bootloader with HTC Dev site or Revolutionary?
Do you have a Nandroid backup of your previous ROM ?
How new are you to all this (flashing etc)?
Is this the first custom ROM you have flashed on this device?
Click to expand...
Click to collapse
My phone was s-off by xtc clip (I did't use revolutionary), boot loader was unlocked on HTC Dev site.
I flashed at first CMW recover, than 4EXT Touch recovery and used it.
I tried a lot of roms, virtuous, endymnion, runny. The best for the beast was CM7.1, nightly. I flashed it month ago and updated succefully. Two days ago I decided to try REAPER. I wiped cache and dalvik's, than flashed reaper v 1.1. Today I updated it to 1.2 version (the same way as always) and I had a problem with dialer, so I wiped everything. Format all ex. sd card was done and I flashed reaper 1.2. I confogured it, just I like (set a new gov reaper, freq 118 (I don't remember) low and 1074 high) and thats it. I tried laucher, sms, phone and thats all.
adix631 said:
My phone was s-off by xtc clip (I did't use revolutionary), boot loader was unlocked on HTC Dev site.
I flashed at first CMW recover, than 4EXT Touch recovery and used it.
I tried a lot of roms, virtuous, endymnion, runny. The best for the beast was CM7.1, nightly. I flashed it month ago and updated succefully. Two days ago I decided to try REAPER. I wiped cache and dalvik's, than flashed reaper v 1.1. Today I updated it to 1.2 version (the same way as always) and I had a problem with dialer, so I wiped everything. Format all ex. sd card was done and I flashed reaper 1.2. I confogured it, just I like (set a new gov reaper, freq 118 (I don't remember) low and 1074 high) and thats it. I tried laucher, sms, phone and thats all.
Click to expand...
Click to collapse
Well in that case, don't worry your phone is safe. Just wait for it to switch off. Then after booting into recovery, just restore the last working ROM backup that you have. Don't flash the Reaper 1.2 that you downloaded till you have confirmed that the md5 checksum matches the one posted by Lowveld.
Hmm. Strange.
Phone turned off - LED was off, so I pulled battery, wait 2-5 minutes (without battery) and tried to turn it on. I saw a black screen. I press vol up/down power buttons, phone vibrated 3 times (quick) and I saw a green LED. I tried turn it on (with vol down button and without it) - nothing. I waited a while then a Led turned off.
I pluged device to the charger - orange led started blinking, so I tried to on phone - nothing. I restarted it (3 buttons) - it vibrated 3 times quickly and the same story from my first post.
Phone is unplugged, orange led is on (not blinking) and no react.
Any ideas??
Can you still boot to recovery?
adix631 said:
Hmm. Strange.
Phone turned off - LED was off, so I pulled battery, wait 2-5 minutes (without battery) and tried to turn it on. I saw a black screen. I press vol up/down power buttons, phone vibrated 3 times (quick) and I saw a green LED. I tried turn it on (with vol down button and without it) - nothing. I waited a while then a Led turned off.
I pluged device to the charger - orange led started blinking, so I tried to on phone - nothing. I restarted it (3 buttons) - it vibrated 3 times quickly and the same story from my first post.
Phone is unplugged, orange led is on (not blinking) and no react.
Any ideas??
Click to expand...
Click to collapse
Well, the blinking signifies inadequate charge for a bootup. Wait till the orange LED stopsa blinking and turns on constantly... then boot into bootloader (Voulme up and Power button - don't let go of the volume button even after releasing the power button) - I don't want you to restart by using three button combo...otherwise you'll be back to the same problem, trying to boot into a broken OS... Just disconnect again and wait for it to switch off.... then reinsert battery, connect to charger, then wait for the LED blinking to stop. Have a little patience! and DON"T RESTART with three button combo. Just boot into bootloader with Voulme up + Power key.
You have to follow these instructions carefully, exactly as i have written. Report back what happens.
enigmaamit said:
Well, the blinking signifies inadequate charge for a bootup. Wait till the orange LED stopsa blinking and turns on constantly... then boot into bootloader (Voulme up and Power button - don't let go of the volume button even after releasing the power button) - I don't want you to restart by using three button combo...otherwise you'll be back to the same problem, trying to boot into a broken OS... Just disconnect again and wait for it to switch off.... then reinsert battery, connect to charger, then wait for the LED blinking to stop. Have a little patience! and DON"T RESTART with three button combo. Just boot into bootloader with Voulme up + Power key.
You have to follow these instructions carefully, exactly as i have written. Report back what happens.
Click to expand...
Click to collapse
I did it exactly like you've written. Waited till phone, switch off, connected it and charged till led stopped blinking, disconnect, and try to boot it into recovery (vol up + power). Phone wibrated 3 times (screen did't react) and the same story. Now waiting for discharging and I'll try again.
Anyway thanks for your help and interest.
What else I can do? If the phone is not responding I can send it to warranty service. Meybe they will honour it... If not...ehss very expensive play.
adix631 said:
I did it exactly like you've written. Waited till phone, switch off, connected it and charged till led stopped blinking, disconnect, and try to boot it into recovery (vol up + power). Phone wibrated 3 times (screen did't react) and the same story. Now waiting for discharging and I'll try again.
Anyway thanks for your help and interest.
What else I can do? If the phone is not responding I can send it to warranty service. Meybe they will honour it... If not...ehss very expensive play.
Click to expand...
Click to collapse
Well, it that's not workin, Wait till the phone switches off again. Then configure adb, make sure it detects your device (use the command: adb devices) and then type the following at the cmd prompt :
adb reboot recovery
This should take you to recovery.
Ok, what can I say? Youe last thread worked!! I restared device, connect to computer - it was found as usb disk. In sdk tool divece was also found, this time as my ds Just restarted a recovery. First I saw an error in 4ext recovery, but it started with orange letters. I wiped all, formated all, recover old system, restart phone. And it works! Now I flshesd last jorgens CM7 and starting to config my phone. But a heart attack was close... Thanks man
adix631 said:
Ok, what can I say? Youe last thread worked!! I restared device, connect to computer - it was found as usb disk. In sdk tool divece was also found, this time as my ds Just restarted a recovery. First I saw an error in 4ext recovery, but it started with orange letters. I wiped all, formated all, recover old system, restart phone. And it works! Now I flshesd last jorgens CM7 and starting to config my phone. But a heart attack was close... Thanks man
Click to expand...
Click to collapse
You're welcome brother! And Congratulations!!
I know what you must have gone through till you reclaimed your phone. I remember the first time i was in a situation like yours... had to figure out this discharge the phone, LED blinking etc... thing on my own..., everyone else said battery pull was my only option. But i sitll didn't do it. I had around 60% battery remaining before this happened, so you can only imagine how many sleepless hours i spent waiting for the damn battery to run dry. http://forum.xda-developers.com/showthread.php?t=1271360
The important thing is to resist the temptation of pulling battery. Everything can be salvaged if you don't do that, but once you fry your eMMC, there is nothing anyone can do without physically repairing the phone.
May I suggest you edit the topic your OP and add the word [SOLVED] to the title. This will ensure anyone in trouble can easily locate this thread out of the cacophony on xda!
Related
Does anyone have this problem? I`ve searched and cant find a solution.
I had sense rom on my phone then decided to go back to jboogie rom. I booted into stock recovery(power+vol down) and when i tried to tap bottom right of screen the screen wouldn`t respond so I couldn`t do a factory reset. I then tried volume up=power button to flash sbf through RSDlite. Nothing came on my phone screen telling me to attach usb, it juat stayed blank, although rsdlite said phone was connected so i started to flash sbf anyway. Then on the phone screen it said software update in progress, once it finished flashing, instead of saying rebooting phone on RSDlite it came up with "pass" and the phone wont boot or do anything at all now.
Sorry for long message, but hope someone can help.
Thanks
Mark
try to flash a stock rom sbf with rsdlite and after that, do a wipe in recovery mod. to enter recovery press power+ vol down, after the droid apears, push vol up+vol down. You have to see then the stock recovery menu. I did in the same way and is working. I think is now so easy to really brick this phone.
Thanks for your reply, unfortunately when I try to get into stock recovery by pressing power+volume down I dont get anything on the screen at all anymore, nothing happens. Its the same when I press power+volume up to try to flash it too.
not even white led?
maybe your battery is 2low?
if u see the white led u can still go into bootloader and flash .sbf with rsd lite
Hi there,
I can't believe its dead!!
I have tried every rom available and tried out all the .sbf's too. A couple of times i thought i have bricked it but it was always done to user error (or a lack of understanding at times on my part). These Defy's seem to be almost bullet proof!
I had the "pass message" from RSDLite and all i had to do was flash the "2.2 bootonly" sbf to get past it. I have had corrupted boot loader messages and more but it just keeps coming back for more once things the right things are done in the right sequence.
Assuming your battery is ok, I would try installing one of the latest froyo .sbf's with RSDLite 3.9 only completion do a wipe from the stock recovery (hold pwr + vol down). Press vol up and vol down to activate the menu, select wipe with volume up or down, press power to go. The after rooting apply one of the excellent roms from Jboogie & Pays.
Good luck... sure it will be fine.
Andy
qpzmaluk said:
Thanks for your reply, unfortunately when I try to get into stock recovery by pressing power+volume down I dont get anything on the screen at all anymore, nothing happens. Its the same when I press power+volume up to try to flash it too.
Click to expand...
Click to collapse
If you have only black screen, you have to flash the latest undowngradable rom you flashed, then you you finally get to moto logo, you will be able to go to recovery and wipe. After it it will boot just fine.
I had the exact same problems, i tried to reflash. It ended up not showing anything on the screen in any of the button combinations. It did however show in RSD Lite and after i tried to flash the chinese rom it said "pass" after that i only got a white led and it no longer was detectable through usb. I tried to recharge the battery so i left it on white light with charger plugged over the night... No success. It's now in service and hope they fix it.
I would like to point out to anyone trying to help me that bootloader no longer shows up, neither recovery menu.
astearon said:
I had the exact same problems, i tried to reflash. It ended up not showing anything on the screen in any of the button combinations. It did however show in RSD Lite and after i tried to flash the chinese rom it said "pass" after that i only got a white led and it no longer was detectable through usb. I tried to recharge the battery so i left it on white light with charger plugged over the night... No success. It's now in service and hope they fix it.
I would like to point out to anyone trying to help me that bootloader no longer shows up, neither recovery menu.
Click to expand...
Click to collapse
I had a similar thing when i flattened my battery half way through flashing an .sbf. I borrowed a friends battery, flashed the boot only and all was fine. There is a couple of pointers on the forum on how to charge your battery if you dont have a working rom (it wont charge without one! You have to get the motorola logo followed by the battery animation to charge your battery).
In your case im pretty certain you could have saved yourself the hassle of sending it off for service.
Andy
Thanks for all the replys, I have already had the dead battery a couple of weeks ago and "revived" it by putting the + and _ wires of usb cable into the battery of the defy, but this seems different, I cant get anything to work on it, no roms will flash and all I get is black screen. I do get the white led but only sometimes. It is very change indeed, I will try some of the solutions you guys said tomorrow and let yous know how I got on.
Thanks again
Mark
I did not want to risk charging out of wires, i have unlimited warranty on it after all so i gave it to service hoping a fix will be made by guys who know what they where doing (i hope).
In any case i see -qpzmaluk- tried off of wires and nothing happened.
I tried to flash again this morning using all the techniques above but I cant get rsdlite to recognise my phone either now. All i get is when connected to usb is the white led, nothing else happens when i try to go into recovery etc.
Mark
Huge thanks to EDITION I got my phone working again.
I did what he said about flashing last undowngradeable rom and surprisingly it came back to life. Brilliant mate, i cant thank you enough.
Mark
how did u do that? if u said your rsd lite cant recognize your phone?
I kept trying to connect to pc with usb and rsdlite eventually found it so I took the chance of flashing froyo 3.4.3-the one I last had on the phone, and surprisingly this time it went throughht to the end of booting the phone and now I have everything working again including stock recovery etc.
One thing to mention was that I couldn`t get into pwer+vol up or down before I flashed this time I flashed my phone. I just connected it to pc and luckily rsdlite recognised it this time and I just pressed flash button, then eventually phone booted up. So something was wrong and it didn`t flash it the normal way by going into stock recovery on phone but it worked
when i was on runny v1.1 rom,i tried to flash unity v4 kernel,and it's very unstable,i had no other choice but to reflash the rom to get the kernel back.
the rom has wipe code in it's updater script...
the device hanged at "formatting nand with ext4 alignment" for like half an hour,...
having read the danger of pulling battery...i decided to gold the volume buttons and power button...the phone then rebooted and vibrate for 7 times...what can i do?i tried adb,but the computer cannot detect the device/...
If you don't want to pull the battery leave it run flat and then pull it. Charge it while the phone is off and then see if you can boot into hboot. If you can get to hboot then no you almost certainly haven't bricked your phone.
have you tried holding down the volume down button then holding down power at the same time? this should take you to the bootloader. from there you can go to recovery and format system, data and cache then install a previous backup or a new rom
i used the button method to reboot...and after that it rebooted and vibrates for 7 times...when i pulled my battery,and i tried to open it with volume down and power button held,all it does is just vibrates for 7 times again..
tcchuin said:
i used the button method to reboot...and after that it rebooted and vibrates for 7 times...when i pulled my battery,and i tried to open it with volume down and power button held,all it does is just vibrates for 7 times again..[/QUOTE
can you get your pc to connect to it? does charging light light up?
if not try connecting wall charger and see if it will charge?
Click to expand...
Click to collapse
no to both questions...
how much charge was in the battery before this happened?
the only thing i can think to try now is a new battery. im getting out of my depth a little now...
After powering it on have you tried to see if adb recognises the phone and if it does does it respond to commands?
You'll find adb&fastboot within my sig, alongwith some HTC drivers download and install both onto your PC (assumong that you don't already have them). then plug the phone into PC by USB. Run a CMD, go to the directory where you extracted adb files and try
Code:
[B]adb devices [/B] [COLOR="Green"]-- [I]just to see if it recognises [/I]device?
[/COLOR]If it does then try :
Code:
[B]adb reboot recovery[/B]
[I]if no response then try[/I]
[B]adb reboot-bootloader[/B]
report back and good luck
it was like around 90%...
it cannot detect the phone...
O dear!
tcchuin said:
it was like around 90%...it cannot detect the phone...
Click to expand...
Click to collapse
It's look like a visit to the local HTC service centre is next step, based on the complete lack of reponse from your phone. Although I'd obviously never advise any one to tell lies , it's probably not a good idea to meantion S-OFF etc when returning the phone and you'll most probably get a replacement unit or at least a new motherboard!
I am using a S3 HTC One S with stock 4.0.3 rom, rooted and unlocked bootloader. I was not carrying my charger with me and phone battery is finished to 0 and phone is closed. After I come home, I connect original charger to phone. Indication led is not flashing orange. I wait around half an hour. It does not flash now also. When I press power button around 7-8 seconds touch buttons blink 5-6 times and indication led begins flashing orange for 3-4 seconds and turns off. What should I do ?
Are you using CWM recovery? That's one fault with CWM, it will not charge the phone when off.
I am using TWRP. I entered recovery and reboot device from it. Problem solved but I still dont know problem.
rumnheim said:
I am using TWRP. I entered recovery and reboot device from it. Problem solved but I still dont know problem.
Click to expand...
Click to collapse
That's good to hear.
rumnheim said:
I am using TWRP. I entered recovery and reboot device from it. Problem solved but I still dont know problem.
Click to expand...
Click to collapse
how did you make it work? cuz i have the same problem... and since i cant charge it.. i dont think it has anymore battery left..
how do u go to recovery if you cant even open the damn phone?
Still orange led is not flashing, I kept my phone on charging. I pressed volume down and power buttons. It didnt open in first try. When I finally boot my phone normally it shows battery is 30%.
So, been running CM10 for a long time on tab. Decided to go back to stock, and downloaded the JB stock rom. Flashed via ODIN. Everything seemed to go OK, except that after the flash the screen went black for ages, and didn't reboot. So I hard powered it off. Probably what did it, but it wasn't going anywhere for about 15 minutes, so figured it was the next step.
Now, I get the battery charging icon. The system goes through the Galaxy Tab 2 7.0 white logo, the swirling then glowing Samsung logo, and then loops through that forever.
It wouldn't be such a problem if I could back into ODIN and do another flash, but I can't get into download mode (normally I do it via adb but that isn't working since there is no USB connection at all). Tried all combinations, power/up, power/down etc. It just boot loops as above. I'm pretty sure I bricked it, but just wanted some confirmation.
Been doing this on and off for a long time, and it's the first time I've ever got stuck like this.
Thanks in advance.
Plug USB charger, your device will boot into charge mode. From charge mode you can boot into recovery by keep holding VOLUME UP button and than press POWER button. Clear data and cache in recovery, reboot.
ketut.kumajaya said:
Plug USB charger, your device will boot into charge mode. From charge mode you can boot into recovery by keep holding VOLUME UP button and than press POWER button. Clear data and cache in recovery, reboot.
Click to expand...
Click to collapse
Thanks, but I tried all combinations of Power/Volume UP and Power/Volume DOWN, it just goes through a normal boot cycle until it starts looping.
I guess it's possible I'm not using the right timing. I'm assuming that you hold Volume UP or DOWN and then press and hold Power until the screen goes black, and then release? I've done it like that many times, and also continued to hold everything down as the logo appears, and then system goes back to the battery charging icon as if it powers off again. I sound like such a noob when I type stuff like that!
I saw ODIN successfully write system.img, boot.img, and recovery.img, so I'm thinking any CWM recovery I had on there is toast.
sl0ttedpig said:
Thanks, but I tried all combinations of Power/Volume UP and Power/Volume DOWN, it just goes through a normal boot cycle until it starts looping.
I guess it's possible I'm not using the right timing. I'm assuming that you hold Volume UP or DOWN and then press and hold Power until the screen goes black, and then release? I've done it like that many times, and also continued to hold everything down as the logo appears, and then system goes back to the battery charging icon as if it powers off again. I sound like such a noob when I type stuff like that!
I saw ODIN successfully write system.img, boot.img, and recovery.img, so I'm thinking any CWM recovery I had on there is toast.
Click to expand...
Click to collapse
You must pull usb cable before start.
You can try to re-flash.
tuxafgmur said:
You must pull usb cable before start.
You can try to re-flash.
Click to expand...
Click to collapse
Well, don't I feel like the idiot!
How did I not think to disconnect the USB before trying this? tuxafgmur, your first "Thanks" has been registered, I've got it from here!
P.S. Welcome to the forum!
it sounds strange. never heard of such a strange boot problem. anyway it could be that while transferring boot.img it became damaged due to some error. i know you probably tryed but you may try and connect it to linux or mac os x in order to check if you could retrive more data about the tab. for example the mac could find if it is totally corrupted. normally when i plug my samsung devices it ask me to add the samsung-modem also if they are turned off. meybe if it happens the same to you you can try to adb fastboot it also if i doubt myself about it working, but give it a shot
i hope my bad english is not preventing you to understand what i'm saying!
give us new feedback!
Hello Guys,
My OnePlus One screen broke, it was in my drawer for more than 15 days without charge, i connected charger for 1 hour it just went from 1% to 5% but i didnt thought much about it as my priority was to change screen, i bought touch+lcd with frame and replaced it myself, but it wasnt powering up then i tried putting the backpanel on, it then booted up to the home screen, but the battery indicator wasnt moving up i powered off the phone after that it never turned on, i researched a bit and found out the after long period of time if you dont charge your phone might have problem charging and there was one suggestion which i followed and that was charge OPO using usb cable attached to PC, i left it for somewhat 7hours and it powered on i thought it might be the problem of ROM i flashed official H2OS (regret selecting this rom) using TWRP, it was a catastrophe my phone wont Enter Bootloader or Recovery, and wont even boot to system, it seemed i hardbricked my device, i used Oneplus one recovery tool 64GB to bring my device to life but after that no matter what i do my device wont enter to bootloader as the volume up button stopped working too : tried advance reboot, powerup+volumeup, opo toolkit.
Help me, i want to root my device and unlock bootloader once again.
Pra7ul said:
Hello Guys,
My OnePlus One screen broke, it was in my drawer for more than 15 days without charge, i connected charger for 1 hour it just went from 1% to 5% but i didnt thought much about it as my priority was to change screen, i bought touch+lcd with frame and replaced it myself, but it wasnt powering up then i tried putting the backpanel on, it then booted up to the home screen, but the battery indicator wasnt moving up i powered off the phone after that it never turned on, i researched a bit and found out the after long period of time if you dont charge your phone might have problem charging and there was one suggestion which i followed and that was charge OPO using usb cable attached to PC, i left it for somewhat 7hours and it powered on i thought it might be the problem of ROM i flashed official H2OS (regret selecting this rom) using TWRP, it was a catastrophe my phone wont Enter Bootloader or Recovery, and wont even boot to system, it seemed i hardbricked my device, i used Oneplus one recovery tool 64GB to bring my device to life but after that no matter what i do my device wont enter to bootloader as the volume up button stopped working too : tried advance reboot, powerup+volumeup, opo toolkit.
Help me, i want to root my device and unlock bootloader once again.
Click to expand...
Click to collapse
adb reboot bootloader
waterdaan said:
adb reboot bootloader
Click to expand...
Click to collapse
That Just Reboots it to system, i have turned adb on and clicked on trust this connection i have checked adb devices, and it shows attached devices too,
it just wont reboot to bootloader, but i can enter recovery. Help Please.
Pra7ul said:
That Just Reboots it to system, i have turned adb on and clicked on trust this connection i have checked adb devices, and it shows attached devices too,
it just wont reboot to bootloader, but i can enter recovery. Help Please.
Click to expand...
Click to collapse
Is your volume up button actually broken or does it still work and can you boot into something? If it still works (hold on, this idea might be a little crazy xD) you could try completely hard bricking (no joke! you cannot get into Qualcomm download mode with a booting device) and restoring it with the msm8974downloadtool from the oneplus one unbricking guide which should theoretically fix everything that is wrong.
noahvt said:
Is your volume up button actually broken or does it still work and can you boot into something? If it still works (hold on, this idea might be a little crazy xD) you could try completely hard bricking (no joke! you cannot get into Qualcomm download mode with a booting device) and restoring it with the msm8974downloadtool from the oneplus one unbricking guide which should theoretically fix everything that is wrong.
Click to expand...
Click to collapse
Even If my volume button dosent work then why wont it enter bootloader via advance reboot it just restarts to system after selecting reboot to bootloader,so i should hard brick my device once again, P.S. i have done that twice before though.