[Q] Mango rom invalid vendor id - Windows Phone 7 Q&A, Help & Troubleshooting

Hello !
I just tried to flash my Vodafone HTC Trophy ( runs NODO 7.0.7392.0 ) with the new Mango rom RUU Spark and so on but i get everytime the error INVALID VENDOR ID.
Did i have to flash my device befor with an other rom ???
Or what could be the matter
thx in advance for help

I had a problem too
SERIAL was on the Bootloader screen after RSPL --> Error260
I pulled the usb cable and reconnected it.
USB was on the Bootloader screen --> Update worked

thx for response but this wasnt the problem.
get the error message : ERROR[294] INVALID VENDOR ID
USB is connected and also shown on the display.

Before I go further with updating to the RUU_Schubert_S_HTC_Europe_4.05.401.02_Radio_5.69.09.29a_22.50.50.21_Signed_SCHUBERT_RELEASE release on my NoDo TMOUS HD7 I want to confirm a few things.
My current phone shows
SPL-3.1.2250
MicroP(LED)
Touch S1
Do I need to use the DFT tool and install the HSPL in order to bypass the invalid vendor id message?
Thanks.

jarbro said:
Before I go further with updating to the RUU_Schubert_S_HTC_Europe_4.05.401.02_Radio_5.69.09.29a_22.50.50.21_Signed_SCHUBERT_RELEASE release on my NoDo TMOUS HD7 I want to confirm a few things.
My current phone shows
SPL-3.1.2250
MicroP(LED)
Touch S1
Do I need to use the DFT tool and install the HSPL in order to bypass the invalid vendor id message?
Thanks.
Click to expand...
Click to collapse
Yes...OP, you need it too in order to flash.

thatboydrae said:
Yes...OP, you need it too in order to flash.
Click to expand...
Click to collapse
I thought when you flash to mango under hspl your device will be damaged ??? Or did i misunderstood something ???
Look into this thread : http://forum.xda-developers.com/showthread.php?t=1195647

Thnx thatboydrae - Update is going although its been stuck at 7% for a bit then through a ERROR [262]: UPDATE ERROR Communication Errors.
I went through the recovery on screen, and when it tried to flash it I got the Invalid Vendor ID again, but now my phone shows
SPL-4.5.2250 and the DFT-RSPL wont work now.
Trying to restore my phone via Zune and try again.

Schewadnaze said:
I thought when you flash to mango under hspl your device will be damaged ??? Or did i misunderstood something ???
Look into this thread : http://forum.xda-developers.com/showthread.php?t=1195647
Click to expand...
Click to collapse
From my understanding it only affects Mozart devices... I have Schubert.

Thanks for this.. I've updated my US Tmo HD7 to the Euro ROM successfully.
Below are the steps if anyone is interested...
- I have SPL 3.1
- I flashed RSPL
- I flashed HSPL
- Extracted the Euro ROM and deleted 'SPL_signed.nbh'
- Ran the ROM update utility and flashed the ROM.
Successful...

jarbro said:
Thnx thatboydrae - Update is going although its been stuck at 7% for a bit then through a ERROR [262]: UPDATE ERROR Communication Errors.
I went through the recovery on screen, and when it tried to flash it I got the Invalid Vendor ID again, but now my phone shows
SPL-4.5.2250 and the DFT-RSPL wont work now.
Trying to restore my phone via Zune and try again.
Click to expand...
Click to collapse
Jarbro, do what Vizagdude posted...it's exactly what I did for my HD7

The easiest way is gold card. The new sol that comes with the rom makes the Os load instantly. Flash with gold card, and no worries
Sent from my HD7 using XDA Windows Phone 7 App

jarbro said:
From my understanding it only affects Mozart devices... I have Schubert.
Click to expand...
Click to collapse
RSPL/HSPL will brick your device if your spl version is 4.XX, one that comes with the new RUU!

Still not able to flash my device.....
Got an HTC Trophy :
SPL-1.22.2250.0(119397)
MicroP(LED) 0x09
TOUCH A1(v10,20)
when i try to flash the Mango Rom :
RUU_Spark_S_HTC_Europe_4.06.401.00_5.69.09_RELEASE .exe
i get this message :
ERROR[294] : INVALID VENDOR ID
is there no one who can help me ????

Schewadnaze said:
Hello !
I just tried to flash my Vodafone HTC Trophy ( runs NODO 7.0.7392.0 ) with the new Mango rom RUU Spark and so on but i get everytime the error INVALID VENDOR ID.
Did i have to flash my device befor with an other rom ???
Or what could be the matter
thx in advance for help
Click to expand...
Click to collapse
Have a look at this forum: http://forum.xda-developers.com/showthread.php?p=17455211 - solved all my issues

Sweet, I'm all mango'd out now. Gotta love it!

Related

My JAMIN not Working??

Hello
I Do Upgrade for my JAMIN with PDAMobiz_Prophet_WM5AKU3.2_v3220 & it was Succeed With out any trouble
Than I Try to upgrade to 2006-11-12_Prophet_WM5AKU2.3_lvsw_edition but my Phone Stack So I reset as say after 30 m (about 48m)
The Baggiest Problem for me after reset my Jamin Stack in Booting (Just show Rom Version & Other) after that noting Happen..
I tray to format But also same. I tray to boot from USB & Install Original ROM I get This Error
ERROR [296] UPGRADE ONLY
This NBF file connects used for your PDA Phone. Please get newer NBF file.
Is there any way to erase ROM and Re Upgrade with Old ROM
I Tray to Upgrade with Latest Update PDAMobiz_Prophet_WM5AKU3.2_v3231
But fail because this Upgrade required synchronization with Pc ..
Until now I lost Every Thing My Phone is Similar to Dead
Please help me
Please change your topic title so it makes sense!
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?
mccune said:
Please change your topic title so it makes sense!
Click to expand...
Click to collapse
Sorry for my title ...
mccune said:
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Click to expand...
Click to collapse
I Don't know about CID
My SPL 1.2
My Device G3
mccune said:
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?
Click to expand...
Click to collapse
I did it & connect to usb but when i execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 it's show me No Device Connect
Thanks for you
You had to CID unlock your phone first!
The only thing you can do I guess is install the NoVendorID Asia version for the Dopod.
You can't install the PDAMobiz ROM because there has to be an AS connection.
Try looking for: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip on the XDA ftp.
Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)
wa7eed said:
Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)
Click to expand...
Click to collapse
You should try to flash your device with the ROM mentioned before.
After that you can try to CID Unlock your phone:
Wiki for Prophet
The CID part
You're lucky you didn't brick your device
First Thanks for all
MY STORY
I try to flash my device with ROM RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_S hip-NoVendorID.zip and I was very happy because it’s start to flash ROM but after rich 95% it’s stop and show me Error INVALED COMMAND ... I tray many times but all same
Even my device now when ever I turn ON it’s go to boot loader mode
Correction my SPL 2.20
Just today I notice I write it wrong 1.2
Waiting for your reply...
Again Thanks
Thanks for you mccune so match for Help & all staff in this great forum already I restore my Live (I mean My Device)
I have to update to this ROM RUU_Prophet_220734_2207114_024721_NVID.exe
Thanks again for all

[NoDo ROM]Spark_Vodafone_DE_1.20.401.00_Radio_5.54.09.21_22. 33b.50.10U_NoDo by ansar

Dear forum members,
In the following A, B, C and D sections is described the flashing process
of the NoDo unbranded ROM: RUU_Spark_Vodafone_DE_1.20.401.00_Radio_5.54.09.21_22.33b.50.10U_NoDo
A. Pre-Requisites
If your Trophy 7 is flashed with a ROM of the following releases:
1. RUU_Spark_Vodafone_DE_1.09.162.00_Radio_5.50.09.15_22.23.50.09U
2. RUU_Spark_Vodafone_DE_1.10.162.06_Radio_5.52.09.16_22.33a.50.10U
then you can flash the following NoDo unbranded ROM and when you like you can comeback to your previous ROM
In case your Trophy 7 is flashed with a different of the above 1, 2 ROMs but your Firmware version at your phone settings>about>more information
is of the form xxxx.yy.zzzzz.162 i.e. with characteristic value 162
then you can also flash the following NoDo unbranded ROM, but you can comeback only to one of the above 1, 2 ROMs
B. Downloading
You must download the following 2 ROMs:
1. Download this zip ROM file: RUU_Spark_Vodafone_DE_1.20.401.00_Radio_5.54.09.21_22.33b.50.10U_NoDo_by_ansar
2. Download this zip ROM file: RUU_Spark_Vodafone_DE_1.20.401.00_Radio_5.54.09.21_22.33b.50.10U_NoDo_Signed_by_ansar
Extract the downloaded zip ROM files with an unzip / 7zip utility in separate folders of your choice
C. Flashing Process
In order to successfully flash the provided ROMs you must follow these steps:
1. Flash the ROM of the above (B.1.) extracted zip ROM file
2. After flashing Trophy 7 will remain at about 90% - 98%, ignore it
3. Hold the Power Button untill Trophy 7 will power off and enter to the bootloader mode
4. In the screen of your computer the ROMUpdateUtility will report a flashing ERROR
5. Ignore it and exit from ROMUpdateUtility
6. Now flash the ROM of the above (B.2.) extracted zip ROM file
7. After flashing your Trophy 7 will boot normally
8. Exit from ROMUpdateUtility and proceed with your brand new ROM
If you do not want them you can delete all operator apps, in order to have more free RAM
Beware, in WP7 deleting an application means it is deleted from ROM
D. ROM Flashing Instructions
In order to flash a ROM follow these steps:
1. Press and hold power-on/off button to power-off the phone
2. Press and hold volume-down button and then press power-on/off button to enter bootloader mode
3. When your phone enters the tricolor screen bootloader mode, release volume-down button
4. Connect your phone to your windows 7/vista/xp pc/laptop with a usb cable
5. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop
6. After completion of (D.5.) above, check the usb message connection on your phone screen
7. To flash the ROM go to your pc/laptop folder where the downloaded zip ROM file is extracted
8. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen
Till next version enjoy!!!
Regards, ansar
ansar.ath.gr said:
1. RUU_Spark_Vodafone_UK_1.09.162.04_Radio_5.50.09.15_22.23.50.09U
2. RUU_Spark_Vodafone_UK_1.10.162.06_Radio_5.52.09.16_22.33a.50.10U
Click to expand...
Click to collapse
You made a little typo here, probably because of copy/paste.
You meant Vodafone_DE not Vodafone_UK.
ansar.ath.gr said:
1. Download this zip ROM file: RUU_Spark_Vodafone_DE_1.20.401.00_Radio_5.54.09.21_22.33b.50.10U_NoDo_by_ansar
2. Download this zip ROM file: RUU_Spark_Vodafone_DE_1.20.401.00_Radio_5.54.09.21_22.33b.50.10U_NoDo_Signed_by_ansar
Click to expand...
Click to collapse
Unfortunately links are dead.
Also I have few questions for you, but I will not make another thread because they are related to this topic.
I unbranded my phone with your files, unlocked it and get NODO update via Zune. My current firmware version is 2250.09.10908.401 and my radio is 5.52.09.16_22.33a.50.10U.
1. As far as I understand I still have to update with Vodafone DE (162) files and I can not use HTC Europe (401) files. Right?
2. Is there any chance to update just radio because now I have unlocked Trophy with NODO, and if I put this ROM I will not be able to unlock it.
viking13 said:
You made a little typo here, probably because of copy/paste.
You meant Vodafone_DE not Vodafone_UK.
Click to expand...
Click to collapse
viking13 said:
Unfortunately links are dead.
Click to expand...
Click to collapse
Will be updated and checked, thnx
viking13 said:
Also I have few questions for you, but I will not make another thread because they are related to this topic.
I unbranded my phone with your files, unlocked it and get NODO update via Zune. My current firmware version is 2250.09.10908.401 and my radio is 5.52.09.16_22.33a.50.10U.
1. As far as I understand I still have to update with Vodafone DE (162) files and I can not use HTC Europe (401) files. Right?
2. Is there any chance to update just radio because now I have unlocked Trophy with NODO, and if I put this ROM I will not be able to unlock it.
Click to expand...
Click to collapse
Hi,
What was your phone's initial firmware version and with which files did you unbrand it?
Regards, ansar
ansar.ath.gr said:
What was your phone's initial firmware version and with which files did you unbrand it?
Regards, ansar
Click to expand...
Click to collapse
I really cannot remember what was my initial firmware version. It had red Vodafone theme and Vodafone logo on boot. I guess it had 162 in version, since I downloaded and flashed those two files:
RUU_Spark_Vodafone_DE_1.09.401.08_Radio_5.51.09.06_22.23.50.09U_Signed_by_ansar.zip
RUU_Spark_Vodafone_DE_1.10.162.06_Radio_5.52.09.16_22.33a.50.10U_Signed_by_ansar.zip
Since then my default theme is green and I only have HTC logo on boot. Thank you for that!
Then I unlocked it, installed February update, and then March update. Now I have NODO, and can use Native keyboard, and upload my own ringtones.
The only issue I have at the moment is older radio version then in your new files.
Hi,
You had Vodafone_DE and unbranded to HTC_Europe
The new files in post #1 are of NoDo 7389 and newest HTC OEM 1.20.401 Europe and radio 5.54.09.21
After flashing you will also upgrade MS NoDo with zune to 7390 and retaining newest OEM and radio
Regards, ansar
ansar.ath.gr said:
Hi,
You had Vodafone_DE and unbranded to HTC_Europe
The new files in post #1 are of NoDo 7389 and newest HTC OEM 1.20.401 Europe and radio 5.54.09.21
After flashing you will also upgrade MS NoDo with zune to 7390 and retaining newest OEM and radio
Regards, ansar
Click to expand...
Click to collapse
Unfortunately links still not work. I hope you will fix that soon.
btw. Is it possible to unlock 7389?
viking13 said:
Unfortunately links still not work. I hope you will fix that soon.
btw. Is it possible to unlock 7389?
Click to expand...
Click to collapse
Hi,
Links are working now
After flashing 7389 you will receive 7390 NoDo
There is no yet meta NoDo ROM, we will see ...
Regards, ansar
Lil question... Why unbranded if there is still Vodafone bootscreen and apps? Or are they gone? Thx for your work
Sent from my 7 Trophy T8686 using Board Express
Saste said:
Lil question... Why unbranded if there is still Vodafone bootscreen and apps? Or are they gone? Thx for your work
Sent from my 7 Trophy T8686 using Board Express
Click to expand...
Click to collapse
Hi,
You unbrand to a NoDo with an HTC_Europe ROM inside and newer radio
As for apps you can get rid of them permanently by unistall them
Vodafone splash screen can be replaced by side loading
Regards, ansar
Saste said:
Lil question... Why unbranded if there is still Vodafone bootscreen and apps? Or are they gone? Thx for your work
Sent from my 7 Trophy T8686 using Board Express
Click to expand...
Click to collapse
I used two files I mentioned in one of previous posts and successfully removed all Vodafone specific features (logo, theme, default webpage...).
It is same with those two files from this post. Only difference is that you will get newer Firmware, OS and Radio.
You can safely flash branded ROM later if you decide that you still want Vodafone specific things.
Ansar posted both branded and unbranded ROMs, so you can decide what you want and switch them at any time.
Please keep in mind that you will lost all your data when you flash ROM, so you should backup with Zune before this.
Now I have some questions for you:
1. Do you need Vodafone specific things or not?
2. Do you need unlocked WP7 or not?
If you do not know what unlocked means, that means that your phone report itself as developer device and you can install anything you want in your phone. Many people think that unlocking is all about how to get illegal stuff, and that is not always true. I need some applications from this forum that are not available at marketplace (Native keyboard for example).
If you need unlocked WP7 then I have two more questions:
3. What is more important to you to have latest Firmware or unlocked phone?
4. What is more important to you to have easy NODO update, or to have unlocked phone?
I need those answers to give you advice what you should do.
Thx my trophy is still unlocked unbranded with a europe Rom and updated to nodo ;-) just wanted to know why IT is called "unbranded" altough its a Vodafone one...
Sent from my 7 Trophy T8686 using Board Express
Saste said:
Thx my trophy is still unlocked unbranded with a europe Rom and updated to nodo ;-) just wanted to know why IT is called "unbranded" altough its a Vodafone one...
Sent from my 7 Trophy T8686 using Board Express
Click to expand...
Click to collapse
It's call unbranded because you will get clean OS with no brand specific stuff in it (logo, default webpage...).
If you still have Vodafone logo and your current firmware version ends with 162 and not 401, that means that something is wrong there and that you have BRANDED ROM.
If you simply asking why your CID is still same, and why you need to use specific ROMs for Vodafone DE phones, that's because flashing utility checks your CID, and your CID is still same as it was when you got your phone.
If you want to change your CID you have another method for that, but you need one more phone (with removable memory card) and another cable (Gold card method).
I like ansar's ROMs more because you can get clean OS using just a cable that you got with your phone, and that is all you need. You can also revert to branded ROM at any time (I do not want this, but it is still nice to know that).
It is more important to me to have unlocked phone, than to have latest firmware, but having latest radio is nice , so last time I flashed my phone with those two files:
1. RUU_Spark_Vodafone_DE_1.09.401.08_Radio_5.51.09.06 _22.23.50.09U_Signed_by_ansar.zip
2. RUU_Spark_Vodafone_DE_1.20.401.00_Radio_5.54.09.21 _22.33b.50.10U_NoDo_Signed_by_ansar
As you can see first file is from older ansar's post (with 7004 OS), and second file from this post (5.54 radio).
I unlocked my phone, installed patch to prevent re-lock, updated to 7008 and then updated to NODO.
Now I have:
OS: 7.0.7390.0
Firmware: 2550.09.10908.401
Radio: 5.54.09.21_22.33b.50.10U
UNLOCKED
Disadvantages of this method is that you will have to update two times, and you will need to use a trick from this forum to get NODO.
If you use files from ansar's first post in this thread, you will get NODO pre-release, and you will be notified about NODO update immediately, so you will have to update only once. You will also have latest firmware 12000.
Unfortunately you cannot unlock your phone then (for now).
Saste said:
Thx my trophy is still unlocked unbranded with a europe Rom and updated to nodo ;-) just wanted to know why IT is called "unbranded" altough its a Vodafone one...
Sent from my 7 Trophy T8686 using Board Express
Click to expand...
Click to collapse
Hi,
HTC_Europe is not SIM locked and that's why called unbranded
Regarads, ansar
viking13 said:
It's call unbranded because you will get clean OS with no brand specific stuff in it (logo, default webpage...).
If you still have Vodafone logo and your current firmware version ends with 162 and not 401, that means that something is wrong there and that you have BRANDED ROM.
If you simply asking why your CID is still same, and why you need to use specific ROMs for Vodafone DE phones, that's because flashing utility checks your CID, and your CID is still same as it was when you got your phone.
If you want to change your CID you have another method for that, but you need one more phone (with removable memory card) and another cable (Gold card method).
I like ansar's ROMs more because you can get clean OS using just a cable that you got with your phone, and that is all you need. You can also revert to branded ROM at any time (I do not want this, but it is still nice to know that).
It is more important to me to have unlocked phone, than to have latest firmware, but having latest radio is nice , so last time I flashed my phone with those two files:
1. RUU_Spark_Vodafone_DE_1.09.401.08_Radio_5.51.09.06 _22.23.50.09U_Signed_by_ansar.zip
2. RUU_Spark_Vodafone_DE_1.20.401.00_Radio_5.54.09.21 _22.33b.50.10U_NoDo_Signed_by_ansar
As you can see first file is from older ansar's post (with 7004 OS), and second file from this post (5.54 radio).
I unlocked my phone, installed patch to prevent re-lock, updated to 7008 and then updated to NODO.
Now I have:
OS: 7.0.7390.0
Firmware: 2550.09.10908.401
Radio: 5.54.09.21_22.33b.50.10U
UNLOCKED
Disadvantages of this method is that you will have to update two times, and you will need to use a trick from this forum to get NODO.
If you use files from ansar's first post in this thread, you will get NODO pre-release, and you will be notified about NODO update immediately, so you will have to update only once. You will also have latest firmware 12000.
Unfortunately you cannot unlock your phone then (for now).
Click to expand...
Click to collapse
HAve followed the instructions of the poster, installed the 7004 version OLD ROM and the second file from first post, unlocked my phone. Now, as quoted: "you will need to use a trick from this forum to get NODO". What is the trick, can anyone direct me please!
mughalgxt said:
HAve followed the instructions of the poster, installed the 7004 version OLD ROM and the second file from first post, unlocked my phone. Now, as quoted: "you will need to use a trick from this forum to get NODO". What is the trick, can anyone direct me please!
Click to expand...
Click to collapse
That was needed to get Nodo earlier, but not anymore.
Nodo is officially rolled out, and an update after that.
Just update your phone over Zune. Let me know if you have any problems.
mughalgxt said:
HAve followed the instructions of the poster, installed the 7004 version OLD ROM and the second file from first post, unlocked my phone. Now, as quoted: "you will need to use a trick from this forum to get NODO". What is the trick, can anyone direct me please!
Click to expand...
Click to collapse
Hi,
Did not receive NoDo yet?
Regards, ansar
ansar.ath.gr said:
Hi,
HTC_Europe is not SIM locked and that's why called unbranded
Regarads, ansar
Click to expand...
Click to collapse
My trophy is Vodafone.De. ,it was sold to Germany. Now I am using DFT FREEDOM ROM V1 version. and I already got HSPL. Now the question is Could I flash Asia rom to get official update of 7720 via Zune client ? Will my sim card(I am China GSM user) be locked if I flash Asia wwe official rom ?
wudongxing said:
My trophy is Vodafone.De. ,it was sold to Germany. Now I am using DFT FREEDOM ROM V1 version. and I already got HSPL. Now the question is Could I flash Asia rom to get official update of 7720 via Zune client ? Will my sim card(I am China GSM user) be locked if I flash Asia wwe official rom ?
Click to expand...
Click to collapse
Hi,
Yes you can do, actually you can flash any Spark ROM
Regards, ansar
Please ReUp the two files to debrand the Trophy
No chance somebody ReUp the files? The Rapidhsare Links are death
please

[Q] HTC Shipped Mango ROM ERROR. Help?

I was attempting to flash the new Shubert HTC Shipped Mango ROM on my HTC HD7 which was running the DFT FREEDOM 7720 ROM.
I ran RSPL. Started to flash the ROM. Then it stopped at 7% with an "Invalid Device ID" error.
Now my phone only powers into bootloader mode and not into the OS. Also, the SPL went from 3.1 to 4.5 so now I can't flash anything over it.
Can anyone tell me how to get my SPL back to 3.1? Or am I in trouble?
Thanks.
sorry but u r in trouble didnt u read the warning on the dft thread...
"WARNING TO ALL:
Do NOT use RSPL / HSPL with Mozart 4.XX and other RUU ROMS with MANGO.
All WP7F devices affected: MOZART, GOLD, SCHUBERT, MONDRIAN, SPARK!
It will damage your device. Not a joke"
now u must wait until a solution is found sorry.
You should still be able to flash a rom to your device. It must be a rom that was originally made for your device. Ex. Tmobile us rom to an American tmobile hd7.
Thanks for your reply.
Technically, I used RSPL when it was still on 3.1. When the error occured at 7%, my phone rebooted into bootloader mode with spl 4.5 and is stuck there. And I haven't used RSPL / HSPL since.
In the original thread I read a post that read,
"Beware that this will change your spl to 4.5, if you want to go back only flash a ROM that is specific to your device, like mine is TMOUS device id .531
Even I had unbranded it HSPL way, that doesn't mean I lost my device ID. So in order for me to use HSPL again, I need to flash the TMOUS .531 radio version"
These english translations are hard to decipher. Which is why I misunderstood the warnings to begin with. Any help is appreciated.
Regards,
tiu
jahpsphacker said:
You should still be able to flash a rom to your device. It must be a rom that was originally made for your device. Ex. Tmobile us rom to an American tmobile hd7.
Click to expand...
Click to collapse
If I run RSPL to flash a stock TMOUS rom, it will ask for my SPL version number. But SPL 4.5 is not an option in the pull down menu. It only goes up to 3.4
Do you have any advice for which I should choose?
the point is your phone needs to be spl when flashing mango roms ,it can not be rspl/hspl... was your phone spl when u attempted to flash the mango rom ?
matiu_00 said:
If I run RSPL to flash a stock TMOUS rom, it will ask for my SPL version number. But SPL 4.5 is not an option in the pull down menu. It only goes up to 3.4
Do you have any advice for which I should choose?
Click to expand...
Click to collapse
does ur phone connect to computer ? does it say usb on bottom of bootloader screen? if it does u can flash stock tmous rom no need for rspl.
bigtime1 said:
the point is your phone needs to be spl when flashing mango roms ,it can not be rspl/hspl... was your phone spl when u attempted to flash the mango rom ?
Click to expand...
Click to collapse
no, unfortunately it was RSPL
It is connected to my computer and Active Sync is working in USB mode.
It currently reads SPL 4.5
matiu_00 said:
no, unfortunately it was RSPL.
Click to expand...
Click to collapse
there was ur problem it needed to be spl but if ur phone can still connect to computer it wont hurt to try and flash tmous stock rom pre-nodo or nodo...
bigtime1 said:
there was ur problem it needed to be spl but if ur phone can still connect to computer it wont hurt to try and flash tmous stock rom pre-nodo or nodo...
Click to expand...
Click to collapse
Thank you again for your help. One last question, if I try to flash a stock ROM should I go with my original SPL version 3.1?
Or should I try to go with 3.4 which is closer to 4.5?
[edit]Nevermind. You said no need for RSPL. Think I finally get that part.
[edit]It worked! Thanks again for your help. Gotta love the xda community.
It worked! Without RSPL, I've flashed a TMOUS pre NoDo stock ROM and my SPL version is back to 1.5
Thank you again for all of your help. It is much appreciated. Take care!
rspl/hspl is only needed to flash custom roms...the tmous stock rom will include original spl ... i think u r lucky the flash of the mango rom failed cuz if it didnt ur bootloader wouldve been inoperative..

[Q] Install RSPL on HTC 7 Pro

hi @all
my english is not so good.
But i try it and hope you can help me.
I have tryed to Jailbreak my Phone and install RSPL for installing the Freedom Rom.
This DFT-Tool said it´s all ok. Congrantulation. My Phone will Restart in RSPL Mode. But my Phone do nothing.
Now i dont know what i have to do. I cant update the Phone on Mango because i see an Error in Zune and i cant install an other Rom too.
Here you have the dates from my HTC 7 Pro.
Bootloader:SPL - 1.7.2250.0
MID: PC921000
my current Windows Phone 7 Version: 7.0.7392.0
I have searched in google but i cant find my Bootloader version.
When i Start my Phone i see in the upper left corner my Bootloader version an Modem.
you can see it in my Attachment.
Hope you can help me because the German Forums can´t do this.
Thx
Can noboddy help me?
I need Mango to use Whats app
I don´t wont a jailbreak anymore.
Cfire said:
Can noboddy help me?
I need Mango to use Whats app
I don´t wont a jailbreak anymore.
Click to expand...
Click to collapse
Hi
my English is not the same very good
I think that you can help this way the firmware
It's not too hard and all you can do at home
http://forum.xda-developers.com/showthread.php?t=893152
This way you can put absolutely any firmware
your bootloader is SPL version 1.7
simple try change to HSPL 1.7 (if supported or try use closest to your)
http://forum.xda-developers.com/showthread.php?t=1195647
after instaling HSPL, use only Mango custom ROM's with disabled Zune update (this is important to prevent (H)SPL damage and halfbrick device).... custom ROM also is full unlocked. after upgrade to Mango, do hard reset and your device is fully ready to use (and also can use custom cab files for customization's)
http://forum.xda-developers.com/showthread.php?p=17396493#post17396493
You can try do downgrade to official preNoDo or NoDo version from that topic: http://forum.xda-developers.com/showthread.php?t=1013810 or http://forum.xda-developers.com/showthread.php?t=995999 If you install these ROM you change SPL to 1.22 or 1.24 and you can install HSPL and DFT ROM.
Thank´s
i will try the second way from Budniu at first.
I hope it works.
--edit--
So i install the first version from Budniu. Now im on 7.0.7004.0.
But my SPL is the same as before.
@dxdy
i can´t install HSPL. Thats my problem.
When i try to start RSPL to install HSPL, it say´s "Congrantulations" but my device is not boot in RSPL.
"On screen you should see "RSPL" instead "SPL-"
No i don´t see it. My Device stays on SPL.
Sorry for this second Post.
I Think this information can be important to find a possible solution.
Indifferent what Version is installed, i have every time these four apps on my device.
But i never downloadet this apps.
Thanks for your effort .
Cfire said:
@dxdy
i can´t install HSPL. Thats my problem.
When i try to start RSPL to install HSPL, it say´s "Congrantulations" but my device is not boot in RSPL.
Click to expand...
Click to collapse
try few times... unfortunately i cant install R/HSPL to my demo 7 Pro but on friends Mozart also dont want run RSPL and tried few times and worked...
Will it work on Windows XP?
Because i have tryed it mutch times.
--edit--
So i try it with windows 7 too but it works not
I see everytime the congrantulations screen only and the phone do not restart in RSPL i´ve try with 1.22 and 2.10 both versions brings the same result.
Ok I think your device is branded. I don't know what is your operator ? T-Mobile or o2. You have to read: http://forum.xda-developers.com/showthread.php?t=1307542, maybe one ROM from these help to you.
ohhh sorry i fortgotten to say this detail.
Yes my device is o2 Brandet.
And you must try ...
Budniu said:
Ok I think your device is branded. I don't know what is your operator ? T-Mobile or o2. You have to read: http://forum.xda-developers.com/showthread.php?t=1307542, maybe one ROM from these help to you.
Click to expand...
Click to collapse
great job thank you
hi @ all
all your roms can´t help me to update my Phone.
So i send it in to repair and now it works with Mango.
Thank you all at the same.
Cfire said:
Can noboddy help me?
I need Mango to use Whats app
I don´t wont a jailbreak anymore.
Click to expand...
Click to collapse
Upgrade SPL to SPL_Signed.nbh from Ansar 1.22 Europe ROM by GoldCard (ROM O2 1.24 version contains SPL 1.07 too!). I had 1.07 after unbrick too, now I have HSPL applicable 1.22. M.
I had the same problem and created a different thread (not realising it was the same)
the solution is here http://forum.xda-developers.com/showthread.php?t=1505047
in effect, you need to flash a 1.22 rom, like, RUU_Gold_HTC_Europe_1.22.401.01_Radio_5.63.09.13_3a_22.36.50.15U_by_ansar
onto your device before you can then use the dft tool and then flash a custom rom.
Although it may be that there was no 1.22 rom for your german device at the time you posted...
感谢分享!!!

which RUU choose

help!!!!!!!!!!!!
kindly let me know if I can install RUU_ACCORD_U_APO_00_HTC_Europe_2.00.401.03_1.11b.3 2.19.23_2_15.42.32_RETAIL_ENC_RELEASE.exe
in my HTC T-MOBILE DE 8X with CID MOB-001?
bootloader (175731)
I await response. thanks
priologiacomo said:
help!!!!!!!!!!!!
kindly let me know if I can install RUU_ACCORD_U_APO_00_HTC_Europe_2.00.401.03_1.11b.3 2.19.23_2_15.42.32_RETAIL_ENC_RELEASE.exe
in my HTC T-MOBILE DE 8X with CID MOB-001?
bootloader (175731)
I await response. thanks
Click to expand...
Click to collapse
Based on your bootloader version, I don't think you can, but I might be wrong.
What Windows Phone version are you running?
As of yet, there's no way to flash an RUU version 2.00.401.03 on a phone that has a greater version installed (if you've installed any updates, you'll have a greater version).
IF you could flash, you would first need to debrand your phone first (search for ACDU fix for that), since the RUUs that have been released are straight from HTC, with no carrier modifications and they would fail to flash on a branded phone.
Potis20 said:
Based on your bootloader version, I don't think you can, but I might be wrong.
What Windows Phone version are you running?
As of yet, there's no way to flash an RUU version 2.00.401.03 on a phone that has a greater version installed (if you've installed any updates, you'll have a greater version).
IF you could flash, you would first need to debrand your phone first (search for ACDU fix for that), since the RUUs that have been released are straight from HTC, with no carrier modifications and they would fail to flash on a branded phone.
Click to expand...
Click to collapse
ok this is the situation. I wanted to know if it was possible to install the rom suitable to remove the logo T-MOBILE and have the cid 11111111
thanks await response.
priologiacomo said:
ok this is the situation. I wanted to know if it was possible to install the rom suitable to remove the logo T-MOBILE and have the cid 11111111
thanks await response.
Click to expand...
Click to collapse
From what I've read as far as flashing goes, the operation is a no-go because the OS version is too high and it would cause the flashing progress to stop at the error message "Image version less than..". Do not attempt it since you'll be left with a brick.
Potis20 said:
From what I've read as far as flashing goes, the operation is a no-go because the OS version is too high and it would cause the flashing progress to stop at the error message "Image version less than..". Do not attempt it since you'll be left with a brick.
Click to expand...
Click to collapse
ok thanks more.
Potis20 said:
From what I've read as far as flashing goes, the operation is a no-go because the OS version is too high and it would cause the flashing progress to stop at the error message "Image version less than..". Do not attempt it since you'll be left with a brick.
Click to expand...
Click to collapse
I pm xboxmod and he told me tried to flash uefi.nbh until got uefi error.But I tried all the nbh I could find on the Internet,failed.Now,no one knows how to disable OS version check except htc
fengsam said:
I pm xboxmod and he told me tried to flash uefi.nbh until got uefi error.But I tried all the nbh I could find on the Internet,failed.Now,no one knows how to disable OS version check except htc
Click to expand...
Click to collapse
Have you tried the nbh in the ACDU fix? That one caused my device to show a uefi provision error.
Potis20 said:
Have you tried the nbh in the ACDU fix? That one caused my device to show a uefi provision error.
Click to expand...
Click to collapse
That key.nbh?I tried just say 'Image version less than Device version''
fengsam said:
That key.nbh?I tried just say 'Image version less than Device version''
Click to expand...
Click to collapse
Hmm, I guess whatever that nbh flashes has been updated.
I can't understand why they decided to have that check in place... if I flash a stock RUU, it shouldn't matter what was previously running on the device, it should flash everything back to stock. Why do they make this so user un-friendly?
Potis20 said:
Hmm, I guess whatever that nbh flashes has been updated.
I can't understand why they decided to have that check in place... if I flash a stock RUU, it shouldn't matter what was previously running on the device, it should flash everything back to stock. Why do they make this so user un-friendly?
Click to expand...
Click to collapse
yep,but htc8s don't have this check.In China,someone leaks the official gdr3 ruu for htc c620d(cdma) to repair the bricked phone.My phone is security unlocked,so I tried it,failed.
HI all !
I have the same problem i can't use my phone and i can't downgrade it.
PM232002 P S WP I
SBL1-1.0.21009.0
SBL2-1.0.21009.0
SBL3-1.0.21009.0
RPM-1.1.03078.0
TZ-303.000.241
UEFI -0.0.3030.0(175731)
OS-4.12.401.01
eMMC SMS 14910 MB F-15
CID-HTC_032
Radio-1.20b.32.19.04_15.67b.32.19
MSM8260A v 3.2.1-p1
If i try use RUU.exe phone reboot on 1% and i had error 270
If i try to use Y-connector i have error what my version is higher , or this error DongLeFail:CheckDeviceImage Signature Error.
Can you help me ?
Thanks

Categories

Resources