I was attempting to flash the new Shubert HTC Shipped Mango ROM on my HTC HD7 which was running the DFT FREEDOM 7720 ROM.
I ran RSPL. Started to flash the ROM. Then it stopped at 7% with an "Invalid Device ID" error.
Now my phone only powers into bootloader mode and not into the OS. Also, the SPL went from 3.1 to 4.5 so now I can't flash anything over it.
Can anyone tell me how to get my SPL back to 3.1? Or am I in trouble?
Thanks.
sorry but u r in trouble didnt u read the warning on the dft thread...
"WARNING TO ALL:
Do NOT use RSPL / HSPL with Mozart 4.XX and other RUU ROMS with MANGO.
All WP7F devices affected: MOZART, GOLD, SCHUBERT, MONDRIAN, SPARK!
It will damage your device. Not a joke"
now u must wait until a solution is found sorry.
You should still be able to flash a rom to your device. It must be a rom that was originally made for your device. Ex. Tmobile us rom to an American tmobile hd7.
Thanks for your reply.
Technically, I used RSPL when it was still on 3.1. When the error occured at 7%, my phone rebooted into bootloader mode with spl 4.5 and is stuck there. And I haven't used RSPL / HSPL since.
In the original thread I read a post that read,
"Beware that this will change your spl to 4.5, if you want to go back only flash a ROM that is specific to your device, like mine is TMOUS device id .531
Even I had unbranded it HSPL way, that doesn't mean I lost my device ID. So in order for me to use HSPL again, I need to flash the TMOUS .531 radio version"
These english translations are hard to decipher. Which is why I misunderstood the warnings to begin with. Any help is appreciated.
Regards,
tiu
jahpsphacker said:
You should still be able to flash a rom to your device. It must be a rom that was originally made for your device. Ex. Tmobile us rom to an American tmobile hd7.
Click to expand...
Click to collapse
If I run RSPL to flash a stock TMOUS rom, it will ask for my SPL version number. But SPL 4.5 is not an option in the pull down menu. It only goes up to 3.4
Do you have any advice for which I should choose?
the point is your phone needs to be spl when flashing mango roms ,it can not be rspl/hspl... was your phone spl when u attempted to flash the mango rom ?
matiu_00 said:
If I run RSPL to flash a stock TMOUS rom, it will ask for my SPL version number. But SPL 4.5 is not an option in the pull down menu. It only goes up to 3.4
Do you have any advice for which I should choose?
Click to expand...
Click to collapse
does ur phone connect to computer ? does it say usb on bottom of bootloader screen? if it does u can flash stock tmous rom no need for rspl.
bigtime1 said:
the point is your phone needs to be spl when flashing mango roms ,it can not be rspl/hspl... was your phone spl when u attempted to flash the mango rom ?
Click to expand...
Click to collapse
no, unfortunately it was RSPL
It is connected to my computer and Active Sync is working in USB mode.
It currently reads SPL 4.5
matiu_00 said:
no, unfortunately it was RSPL.
Click to expand...
Click to collapse
there was ur problem it needed to be spl but if ur phone can still connect to computer it wont hurt to try and flash tmous stock rom pre-nodo or nodo...
bigtime1 said:
there was ur problem it needed to be spl but if ur phone can still connect to computer it wont hurt to try and flash tmous stock rom pre-nodo or nodo...
Click to expand...
Click to collapse
Thank you again for your help. One last question, if I try to flash a stock ROM should I go with my original SPL version 3.1?
Or should I try to go with 3.4 which is closer to 4.5?
[edit]Nevermind. You said no need for RSPL. Think I finally get that part.
[edit]It worked! Thanks again for your help. Gotta love the xda community.
It worked! Without RSPL, I've flashed a TMOUS pre NoDo stock ROM and my SPL version is back to 1.5
Thank you again for all of your help. It is much appreciated. Take care!
rspl/hspl is only needed to flash custom roms...the tmous stock rom will include original spl ... i think u r lucky the flash of the mango rom failed cuz if it didnt ur bootloader wouldve been inoperative..
Related
Hi guys,
I've just implemented a Vox USPL which allows you to flash any Vox ROM updates, i.e. you can flash any *official* ROM even if your phone's model and vendor ID doesn't match. It's confirmed that you can also flash cooked ROMs
This SPL is based on original Vox 1.16 SPL but includes 3 patches:
1) g_cKeyCardSecurityLevel = 0 (set 32)
2) Does not check Model & Vendor ID
3) Does not check signature*
(*) code must be formally signed i.e. contain properly-formatted signatures on the right places, however no checking is performed against them.
This means you can flash ANY ROM to your Vox after running USPL on it, no need to pay for CID unlock anymore!
The USPL will *not* help you to SIM unlock your device. You still have to pay for that.
The USPL runs in RAM and is *not* flashed to your device, so there is no risk there. Once it runs you can run any official Vox ROM update utility.
The USPL does *not* permanently CID unlock your phone, like the CID unlocker from imei-check or so.
After you flashed a ROM your phone is again CID locked. Each time you wonna flash a ROM with a different model and/or vendor ID (different from your phone) or a cooked ROM, you must run the USPL again and then flash the ROM.
It's beta and untested and the risk is entirely yours !! Don't blame me if you brick your phone
EDIT:
You can now also flash the USPL allowing you to flash any unsigned (cooked ROM or ROM module, e.g. radio or OS) or signed ROM with any model/vendor ID. The USPL substitutes your SPL until you perform a full ROM update. Consider it as an extra insurance in case something goes wrong with flashing cooked ROMs or any other ROM update !
Instructions:
1. Run the USPL (Vox USPL- CID BYPASS.zip)
2. Run the ROMUpdateUtility.exe (Vox-USPL-RUU.zip)
Have fun,
JockyW
The attachments:
SDA_ApplicationUnlock.zip : application unlocker if u need it
mtty1.42.zip : terminal emulator (not neccessary if u only do ROM updates, but if you wonna play with the bootloader commands you need it)
Vox-USPL-RUU.zip: flash version of USPL (Note: you must first run USPL from "Vox USPL- CID BYPASS.zip" before you can flash it with ROMUpdateUtility.exe from Vox-USPL-RUU.zip !!!)
Vox USPL- CID BYPASS.zip : instructions included
Credits: in particular to pof. This USPL and also the one for Excalibur is based on his USPL for the Elf. See here
I think this is one of the most fantastic news of the century!!!
Finally some cooking can start on this little device.
Thanks again,
Ka.
noob question
what the difference between sim unlock and cid unlock?
This can be found in various threads around here, anyway.
SIM Lock - You can't use a SIM from a different provider than the one who sold you the phone.
CID-Lock - You can't flash your phone with a ROM which hasn't been cooked by your provider (or manufacturer for HTC unbranded phones).
Ka.
jockyw2001 great but make one for htc oxygen pls.
htc s710 - rom
confirm this is working very gd
thanks for all yoru help and support to this fourm
hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.
madds said:
hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.
Click to expand...
Click to collapse
Same here
anyone online right now wanna drop me a line about this... what do I do exactly with the ruu file. Do I place rom image in that folder while runnning update???
so i followed the instructions and executed the cid bypass(installed itsutils and haret). once i get to the end it says use mtty or flash with RUU. so I attempt to flash right after (am I supposed to flash while the screen is black) but its gives me a connections error. I figure its because the phone is off. So I turn it on and update with the RUU again but only make it to 3% before I get a invalid vendor id. Would anyone care to comment on how I can flash this vox to the dopod rom...
madds said:
hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.
Click to expand...
Click to collapse
acid74 said:
Same here
Click to expand...
Click to collapse
To the users who had the same problem as me I am currently flashing my phone and I managed to get past my problem by using the SDA Application unlocker on my vox. I always thought that HTC were already application unlocked. Was going crazy for a while but I guess I should've followed the instructions step-by-step regardless of what I thought.
Big up to jockyw2001(and of course pof for without him alot of us would still be using shipped rom) for this wicked tool.
Cheers
neptune said:
To the users who had the same problem as me I am currently flashing my phone and I managed to get past my problem by using the SDA Application unlocker on my vox. I always thought that HTC were already application unlocked. Was going crazy for a while but I guess I should've followed the instructions step-by-step regardless of what I thought.
Big up to jockyw2001(and of course pof for without him alot of us would still be using shipped rom) for this wicked tool.
Cheers
Click to expand...
Click to collapse
Thanx man,last night i figured it out too......hows the dopod ROM??
acid74 said:
Thanx man,last night i figured it out too......hows the dopod ROM??
Click to expand...
Click to collapse
I only got this phone so I could upgrade it for a friend to stop the boot loop. It seems to have fixed that problem so I guess it's better than the other roms. On the other hand I can't stand smartphone's so my suggestion is to ditch your SP and switch to PPC . Also I read before hand that this ROM doesn't include Windows Live Messenger but it is included in the rom. Just thought I'd let u guys know.
input please
Just ran into another problem and would appreciate some input. I understand that USPL only works for one flash...but I wasn't aware that a hard reset counted as a flash. Regardless my device hung at the dopod boot screen after a hard reset. Is this normal after using USPL on a device, and if so does this occur with all devices??? I would hate to give a phone back and have to tell the person that they can't perform a hard reset...
neptune said:
Just ran into another problem and would appreciate some input. I understand that USPL only works for one flash...but I wasn't aware that a hard reset counted as a flash. Regardless my device hung at the dopod boot screen after a hard reset. Is this normal after using USPL on a device, and if so does this occur with all devices??? I would hate to give a phone back and have to tell the person that they can't perform a hard reset...
Click to expand...
Click to collapse
If you flash a full ROM the SPL is overwritten with the one in the ROM (Dopod = 1.19). Nothing to do with USPL. Booting can take a long time after hard reset. Unplug battery and try again.
jockyw2001 said:
If you flash a full ROM the SPL is overwritten with the one in the ROM (Dopod = 1.19). Nothing to do with USPL. Booting can take a long time after hard reset. Unplug battery and try again.
Click to expand...
Click to collapse
Thanks, I got it to work eventually...Good to know USPL doesn't effect hard resets, I guess you learn something new everyday.
If I had to take a guess before hand I'd figure a SP would boot faster than a PPC, but I realize now that I'd be wrong...
thanks to all for the help, I can finally return this Vox back to its owner
cheers
Hi
I flashed my E650 in French with the swissrom (present on FTP), all works !
an idea to change the logo operator to HTC original ?
thanks
thought I fixed the problem. seems as if after a day it just hangs at the dopod screen. It was working fine everytime I had it. As soon as I give it back it seems to hang. Guess ima just flash it back to the HTC rom, too much hassle for just $20.
why SDA_ApplicationUnlock.zip can't unlock my Orange SPV E650?
Successful rom flash done on a spv e650 on a sim unlock device UK orange
Dear forum members,
In the following A, B, C and D sections is described the flashing process
of the NoDo unbranded ROM: RUU_Spark_Vodafone_DE_1.20.401.00_Radio_5.54.09.21_22.33b.50.10U_NoDo
A. Pre-Requisites
If your Trophy 7 is flashed with a ROM of the following releases:
1. RUU_Spark_Vodafone_DE_1.09.162.00_Radio_5.50.09.15_22.23.50.09U
2. RUU_Spark_Vodafone_DE_1.10.162.06_Radio_5.52.09.16_22.33a.50.10U
then you can flash the following NoDo unbranded ROM and when you like you can comeback to your previous ROM
In case your Trophy 7 is flashed with a different of the above 1, 2 ROMs but your Firmware version at your phone settings>about>more information
is of the form xxxx.yy.zzzzz.162 i.e. with characteristic value 162
then you can also flash the following NoDo unbranded ROM, but you can comeback only to one of the above 1, 2 ROMs
B. Downloading
You must download the following 2 ROMs:
1. Download this zip ROM file: RUU_Spark_Vodafone_DE_1.20.401.00_Radio_5.54.09.21_22.33b.50.10U_NoDo_by_ansar
2. Download this zip ROM file: RUU_Spark_Vodafone_DE_1.20.401.00_Radio_5.54.09.21_22.33b.50.10U_NoDo_Signed_by_ansar
Extract the downloaded zip ROM files with an unzip / 7zip utility in separate folders of your choice
C. Flashing Process
In order to successfully flash the provided ROMs you must follow these steps:
1. Flash the ROM of the above (B.1.) extracted zip ROM file
2. After flashing Trophy 7 will remain at about 90% - 98%, ignore it
3. Hold the Power Button untill Trophy 7 will power off and enter to the bootloader mode
4. In the screen of your computer the ROMUpdateUtility will report a flashing ERROR
5. Ignore it and exit from ROMUpdateUtility
6. Now flash the ROM of the above (B.2.) extracted zip ROM file
7. After flashing your Trophy 7 will boot normally
8. Exit from ROMUpdateUtility and proceed with your brand new ROM
If you do not want them you can delete all operator apps, in order to have more free RAM
Beware, in WP7 deleting an application means it is deleted from ROM
D. ROM Flashing Instructions
In order to flash a ROM follow these steps:
1. Press and hold power-on/off button to power-off the phone
2. Press and hold volume-down button and then press power-on/off button to enter bootloader mode
3. When your phone enters the tricolor screen bootloader mode, release volume-down button
4. Connect your phone to your windows 7/vista/xp pc/laptop with a usb cable
5. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop
6. After completion of (D.5.) above, check the usb message connection on your phone screen
7. To flash the ROM go to your pc/laptop folder where the downloaded zip ROM file is extracted
8. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen
Till next version enjoy!!!
Regards, ansar
ansar.ath.gr said:
1. RUU_Spark_Vodafone_UK_1.09.162.04_Radio_5.50.09.15_22.23.50.09U
2. RUU_Spark_Vodafone_UK_1.10.162.06_Radio_5.52.09.16_22.33a.50.10U
Click to expand...
Click to collapse
You made a little typo here, probably because of copy/paste.
You meant Vodafone_DE not Vodafone_UK.
ansar.ath.gr said:
1. Download this zip ROM file: RUU_Spark_Vodafone_DE_1.20.401.00_Radio_5.54.09.21_22.33b.50.10U_NoDo_by_ansar
2. Download this zip ROM file: RUU_Spark_Vodafone_DE_1.20.401.00_Radio_5.54.09.21_22.33b.50.10U_NoDo_Signed_by_ansar
Click to expand...
Click to collapse
Unfortunately links are dead.
Also I have few questions for you, but I will not make another thread because they are related to this topic.
I unbranded my phone with your files, unlocked it and get NODO update via Zune. My current firmware version is 2250.09.10908.401 and my radio is 5.52.09.16_22.33a.50.10U.
1. As far as I understand I still have to update with Vodafone DE (162) files and I can not use HTC Europe (401) files. Right?
2. Is there any chance to update just radio because now I have unlocked Trophy with NODO, and if I put this ROM I will not be able to unlock it.
viking13 said:
You made a little typo here, probably because of copy/paste.
You meant Vodafone_DE not Vodafone_UK.
Click to expand...
Click to collapse
viking13 said:
Unfortunately links are dead.
Click to expand...
Click to collapse
Will be updated and checked, thnx
viking13 said:
Also I have few questions for you, but I will not make another thread because they are related to this topic.
I unbranded my phone with your files, unlocked it and get NODO update via Zune. My current firmware version is 2250.09.10908.401 and my radio is 5.52.09.16_22.33a.50.10U.
1. As far as I understand I still have to update with Vodafone DE (162) files and I can not use HTC Europe (401) files. Right?
2. Is there any chance to update just radio because now I have unlocked Trophy with NODO, and if I put this ROM I will not be able to unlock it.
Click to expand...
Click to collapse
Hi,
What was your phone's initial firmware version and with which files did you unbrand it?
Regards, ansar
ansar.ath.gr said:
What was your phone's initial firmware version and with which files did you unbrand it?
Regards, ansar
Click to expand...
Click to collapse
I really cannot remember what was my initial firmware version. It had red Vodafone theme and Vodafone logo on boot. I guess it had 162 in version, since I downloaded and flashed those two files:
RUU_Spark_Vodafone_DE_1.09.401.08_Radio_5.51.09.06_22.23.50.09U_Signed_by_ansar.zip
RUU_Spark_Vodafone_DE_1.10.162.06_Radio_5.52.09.16_22.33a.50.10U_Signed_by_ansar.zip
Since then my default theme is green and I only have HTC logo on boot. Thank you for that!
Then I unlocked it, installed February update, and then March update. Now I have NODO, and can use Native keyboard, and upload my own ringtones.
The only issue I have at the moment is older radio version then in your new files.
Hi,
You had Vodafone_DE and unbranded to HTC_Europe
The new files in post #1 are of NoDo 7389 and newest HTC OEM 1.20.401 Europe and radio 5.54.09.21
After flashing you will also upgrade MS NoDo with zune to 7390 and retaining newest OEM and radio
Regards, ansar
ansar.ath.gr said:
Hi,
You had Vodafone_DE and unbranded to HTC_Europe
The new files in post #1 are of NoDo 7389 and newest HTC OEM 1.20.401 Europe and radio 5.54.09.21
After flashing you will also upgrade MS NoDo with zune to 7390 and retaining newest OEM and radio
Regards, ansar
Click to expand...
Click to collapse
Unfortunately links still not work. I hope you will fix that soon.
btw. Is it possible to unlock 7389?
viking13 said:
Unfortunately links still not work. I hope you will fix that soon.
btw. Is it possible to unlock 7389?
Click to expand...
Click to collapse
Hi,
Links are working now
After flashing 7389 you will receive 7390 NoDo
There is no yet meta NoDo ROM, we will see ...
Regards, ansar
Lil question... Why unbranded if there is still Vodafone bootscreen and apps? Or are they gone? Thx for your work
Sent from my 7 Trophy T8686 using Board Express
Saste said:
Lil question... Why unbranded if there is still Vodafone bootscreen and apps? Or are they gone? Thx for your work
Sent from my 7 Trophy T8686 using Board Express
Click to expand...
Click to collapse
Hi,
You unbrand to a NoDo with an HTC_Europe ROM inside and newer radio
As for apps you can get rid of them permanently by unistall them
Vodafone splash screen can be replaced by side loading
Regards, ansar
Saste said:
Lil question... Why unbranded if there is still Vodafone bootscreen and apps? Or are they gone? Thx for your work
Sent from my 7 Trophy T8686 using Board Express
Click to expand...
Click to collapse
I used two files I mentioned in one of previous posts and successfully removed all Vodafone specific features (logo, theme, default webpage...).
It is same with those two files from this post. Only difference is that you will get newer Firmware, OS and Radio.
You can safely flash branded ROM later if you decide that you still want Vodafone specific things.
Ansar posted both branded and unbranded ROMs, so you can decide what you want and switch them at any time.
Please keep in mind that you will lost all your data when you flash ROM, so you should backup with Zune before this.
Now I have some questions for you:
1. Do you need Vodafone specific things or not?
2. Do you need unlocked WP7 or not?
If you do not know what unlocked means, that means that your phone report itself as developer device and you can install anything you want in your phone. Many people think that unlocking is all about how to get illegal stuff, and that is not always true. I need some applications from this forum that are not available at marketplace (Native keyboard for example).
If you need unlocked WP7 then I have two more questions:
3. What is more important to you to have latest Firmware or unlocked phone?
4. What is more important to you to have easy NODO update, or to have unlocked phone?
I need those answers to give you advice what you should do.
Thx my trophy is still unlocked unbranded with a europe Rom and updated to nodo ;-) just wanted to know why IT is called "unbranded" altough its a Vodafone one...
Sent from my 7 Trophy T8686 using Board Express
Saste said:
Thx my trophy is still unlocked unbranded with a europe Rom and updated to nodo ;-) just wanted to know why IT is called "unbranded" altough its a Vodafone one...
Sent from my 7 Trophy T8686 using Board Express
Click to expand...
Click to collapse
It's call unbranded because you will get clean OS with no brand specific stuff in it (logo, default webpage...).
If you still have Vodafone logo and your current firmware version ends with 162 and not 401, that means that something is wrong there and that you have BRANDED ROM.
If you simply asking why your CID is still same, and why you need to use specific ROMs for Vodafone DE phones, that's because flashing utility checks your CID, and your CID is still same as it was when you got your phone.
If you want to change your CID you have another method for that, but you need one more phone (with removable memory card) and another cable (Gold card method).
I like ansar's ROMs more because you can get clean OS using just a cable that you got with your phone, and that is all you need. You can also revert to branded ROM at any time (I do not want this, but it is still nice to know that).
It is more important to me to have unlocked phone, than to have latest firmware, but having latest radio is nice , so last time I flashed my phone with those two files:
1. RUU_Spark_Vodafone_DE_1.09.401.08_Radio_5.51.09.06 _22.23.50.09U_Signed_by_ansar.zip
2. RUU_Spark_Vodafone_DE_1.20.401.00_Radio_5.54.09.21 _22.33b.50.10U_NoDo_Signed_by_ansar
As you can see first file is from older ansar's post (with 7004 OS), and second file from this post (5.54 radio).
I unlocked my phone, installed patch to prevent re-lock, updated to 7008 and then updated to NODO.
Now I have:
OS: 7.0.7390.0
Firmware: 2550.09.10908.401
Radio: 5.54.09.21_22.33b.50.10U
UNLOCKED
Disadvantages of this method is that you will have to update two times, and you will need to use a trick from this forum to get NODO.
If you use files from ansar's first post in this thread, you will get NODO pre-release, and you will be notified about NODO update immediately, so you will have to update only once. You will also have latest firmware 12000.
Unfortunately you cannot unlock your phone then (for now).
Saste said:
Thx my trophy is still unlocked unbranded with a europe Rom and updated to nodo ;-) just wanted to know why IT is called "unbranded" altough its a Vodafone one...
Sent from my 7 Trophy T8686 using Board Express
Click to expand...
Click to collapse
Hi,
HTC_Europe is not SIM locked and that's why called unbranded
Regarads, ansar
viking13 said:
It's call unbranded because you will get clean OS with no brand specific stuff in it (logo, default webpage...).
If you still have Vodafone logo and your current firmware version ends with 162 and not 401, that means that something is wrong there and that you have BRANDED ROM.
If you simply asking why your CID is still same, and why you need to use specific ROMs for Vodafone DE phones, that's because flashing utility checks your CID, and your CID is still same as it was when you got your phone.
If you want to change your CID you have another method for that, but you need one more phone (with removable memory card) and another cable (Gold card method).
I like ansar's ROMs more because you can get clean OS using just a cable that you got with your phone, and that is all you need. You can also revert to branded ROM at any time (I do not want this, but it is still nice to know that).
It is more important to me to have unlocked phone, than to have latest firmware, but having latest radio is nice , so last time I flashed my phone with those two files:
1. RUU_Spark_Vodafone_DE_1.09.401.08_Radio_5.51.09.06 _22.23.50.09U_Signed_by_ansar.zip
2. RUU_Spark_Vodafone_DE_1.20.401.00_Radio_5.54.09.21 _22.33b.50.10U_NoDo_Signed_by_ansar
As you can see first file is from older ansar's post (with 7004 OS), and second file from this post (5.54 radio).
I unlocked my phone, installed patch to prevent re-lock, updated to 7008 and then updated to NODO.
Now I have:
OS: 7.0.7390.0
Firmware: 2550.09.10908.401
Radio: 5.54.09.21_22.33b.50.10U
UNLOCKED
Disadvantages of this method is that you will have to update two times, and you will need to use a trick from this forum to get NODO.
If you use files from ansar's first post in this thread, you will get NODO pre-release, and you will be notified about NODO update immediately, so you will have to update only once. You will also have latest firmware 12000.
Unfortunately you cannot unlock your phone then (for now).
Click to expand...
Click to collapse
HAve followed the instructions of the poster, installed the 7004 version OLD ROM and the second file from first post, unlocked my phone. Now, as quoted: "you will need to use a trick from this forum to get NODO". What is the trick, can anyone direct me please!
mughalgxt said:
HAve followed the instructions of the poster, installed the 7004 version OLD ROM and the second file from first post, unlocked my phone. Now, as quoted: "you will need to use a trick from this forum to get NODO". What is the trick, can anyone direct me please!
Click to expand...
Click to collapse
That was needed to get Nodo earlier, but not anymore.
Nodo is officially rolled out, and an update after that.
Just update your phone over Zune. Let me know if you have any problems.
mughalgxt said:
HAve followed the instructions of the poster, installed the 7004 version OLD ROM and the second file from first post, unlocked my phone. Now, as quoted: "you will need to use a trick from this forum to get NODO". What is the trick, can anyone direct me please!
Click to expand...
Click to collapse
Hi,
Did not receive NoDo yet?
Regards, ansar
ansar.ath.gr said:
Hi,
HTC_Europe is not SIM locked and that's why called unbranded
Regarads, ansar
Click to expand...
Click to collapse
My trophy is Vodafone.De. ,it was sold to Germany. Now I am using DFT FREEDOM ROM V1 version. and I already got HSPL. Now the question is Could I flash Asia rom to get official update of 7720 via Zune client ? Will my sim card(I am China GSM user) be locked if I flash Asia wwe official rom ?
wudongxing said:
My trophy is Vodafone.De. ,it was sold to Germany. Now I am using DFT FREEDOM ROM V1 version. and I already got HSPL. Now the question is Could I flash Asia rom to get official update of 7720 via Zune client ? Will my sim card(I am China GSM user) be locked if I flash Asia wwe official rom ?
Click to expand...
Click to collapse
Hi,
Yes you can do, actually you can flash any Spark ROM
Regards, ansar
Please ReUp the two files to debrand the Trophy
No chance somebody ReUp the files? The Rapidhsare Links are death
please
hi @all
my english is not so good.
But i try it and hope you can help me.
I have tryed to Jailbreak my Phone and install RSPL for installing the Freedom Rom.
This DFT-Tool said it´s all ok. Congrantulation. My Phone will Restart in RSPL Mode. But my Phone do nothing.
Now i dont know what i have to do. I cant update the Phone on Mango because i see an Error in Zune and i cant install an other Rom too.
Here you have the dates from my HTC 7 Pro.
Bootloader:SPL - 1.7.2250.0
MID: PC921000
my current Windows Phone 7 Version: 7.0.7392.0
I have searched in google but i cant find my Bootloader version.
When i Start my Phone i see in the upper left corner my Bootloader version an Modem.
you can see it in my Attachment.
Hope you can help me because the German Forums can´t do this.
Thx
Can noboddy help me?
I need Mango to use Whats app
I don´t wont a jailbreak anymore.
Cfire said:
Can noboddy help me?
I need Mango to use Whats app
I don´t wont a jailbreak anymore.
Click to expand...
Click to collapse
Hi
my English is not the same very good
I think that you can help this way the firmware
It's not too hard and all you can do at home
http://forum.xda-developers.com/showthread.php?t=893152
This way you can put absolutely any firmware
your bootloader is SPL version 1.7
simple try change to HSPL 1.7 (if supported or try use closest to your)
http://forum.xda-developers.com/showthread.php?t=1195647
after instaling HSPL, use only Mango custom ROM's with disabled Zune update (this is important to prevent (H)SPL damage and halfbrick device).... custom ROM also is full unlocked. after upgrade to Mango, do hard reset and your device is fully ready to use (and also can use custom cab files for customization's)
http://forum.xda-developers.com/showthread.php?p=17396493#post17396493
You can try do downgrade to official preNoDo or NoDo version from that topic: http://forum.xda-developers.com/showthread.php?t=1013810 or http://forum.xda-developers.com/showthread.php?t=995999 If you install these ROM you change SPL to 1.22 or 1.24 and you can install HSPL and DFT ROM.
Thank´s
i will try the second way from Budniu at first.
I hope it works.
--edit--
So i install the first version from Budniu. Now im on 7.0.7004.0.
But my SPL is the same as before.
@dxdy
i can´t install HSPL. Thats my problem.
When i try to start RSPL to install HSPL, it say´s "Congrantulations" but my device is not boot in RSPL.
"On screen you should see "RSPL" instead "SPL-"
No i don´t see it. My Device stays on SPL.
Sorry for this second Post.
I Think this information can be important to find a possible solution.
Indifferent what Version is installed, i have every time these four apps on my device.
But i never downloadet this apps.
Thanks for your effort .
Cfire said:
@dxdy
i can´t install HSPL. Thats my problem.
When i try to start RSPL to install HSPL, it say´s "Congrantulations" but my device is not boot in RSPL.
Click to expand...
Click to collapse
try few times... unfortunately i cant install R/HSPL to my demo 7 Pro but on friends Mozart also dont want run RSPL and tried few times and worked...
Will it work on Windows XP?
Because i have tryed it mutch times.
--edit--
So i try it with windows 7 too but it works not
I see everytime the congrantulations screen only and the phone do not restart in RSPL i´ve try with 1.22 and 2.10 both versions brings the same result.
Ok I think your device is branded. I don't know what is your operator ? T-Mobile or o2. You have to read: http://forum.xda-developers.com/showthread.php?t=1307542, maybe one ROM from these help to you.
ohhh sorry i fortgotten to say this detail.
Yes my device is o2 Brandet.
And you must try ...
Budniu said:
Ok I think your device is branded. I don't know what is your operator ? T-Mobile or o2. You have to read: http://forum.xda-developers.com/showthread.php?t=1307542, maybe one ROM from these help to you.
Click to expand...
Click to collapse
great job thank you
hi @ all
all your roms can´t help me to update my Phone.
So i send it in to repair and now it works with Mango.
Thank you all at the same.
Cfire said:
Can noboddy help me?
I need Mango to use Whats app
I don´t wont a jailbreak anymore.
Click to expand...
Click to collapse
Upgrade SPL to SPL_Signed.nbh from Ansar 1.22 Europe ROM by GoldCard (ROM O2 1.24 version contains SPL 1.07 too!). I had 1.07 after unbrick too, now I have HSPL applicable 1.22. M.
I had the same problem and created a different thread (not realising it was the same)
the solution is here http://forum.xda-developers.com/showthread.php?t=1505047
in effect, you need to flash a 1.22 rom, like, RUU_Gold_HTC_Europe_1.22.401.01_Radio_5.63.09.13_3a_22.36.50.15U_by_ansar
onto your device before you can then use the dft tool and then flash a custom rom.
Although it may be that there was no 1.22 rom for your german device at the time you posted...
感谢分享！！！
So.. i've decide to customize my 7 pro. I moved from tp2 november last year.
i've got an official 7740.16 with 5.10 spl and zune backup to 7.0.7xxx
so i've restore my phone to that point, update to mango and ended up with 4.xx spl
follow that tread http://forum.xda-developers.com/showthread.php?t=1013810
i've downgrade spl to 1.22
then hspl by dft.
and i've install NewTech rom succesfuly. then deployed xap. following instruction i've update phone via zune to 8107
now i've got spl 5.11
my questions are...
what could went wrong?
what if i'll try to install another rom or something.. ?
should i run to the nearest forest?
you received the spl 5.11 because of the htc update after 7740, or is it after 7720. one of them but with the u2m8107.xap from ansar you can block the htc updates and your spl stays like it was on the begin. what could went wrong? for the future, dont flash any rom if you have above 4.1 spl. you must downgrade it and flash a nodo rom. that saves your device from brick
Hi.
As i said i went down from 5.10 to 3.xx and then to 1.22 with instructions from thread above. so thanks for warnings, but i've read all posts from customizing wp7f category
i don't even think that flashing custom rom with higher spl than 2.1x is possible.
And i thought that in Ansar's rom thread is clear instruction how to update with that xap file with zune. Specification of that rom also says 'zune updateable'. I'm 'probably sure' that i've checked bootloader after first update to 7740. And hspl was still there.
I've checked today.. Zune restore isn't possible. So all i know is to wait for hspl 5.xx
Or do that Y cable thing. But i don't know why.
Hello guys,
I'm having trouble with my HTC 7 Pro.
Principially, I want to fully unlock my phone.
To do so, I wanted to install the HSPL. When I did that, I recognized that my current SPL is too high, 5.12.2258.0.
So, I tried do downgrade the SPL, but when I enter the bootloader, it doesn't tell me "serial" or "usb" any more....
I also did a hardreset, but nothing changed.
But do I have to do? Please help!
Thanks a lot!
Your device is half-brick. You have to install new SPL in service with JTag. At home you can't do that.
Budniu said:
Your device is half-brick. You have to install new SPL in service with JTag. At home you can't do that.
Click to expand...
Click to collapse
I see, but how exactly did that happen?
Is there any backup-method, that I can use get my messages, contacts and call-logs on another htc 7 pro?
Try this: http://forum.xda-developers.com/showthread.php?t=1532103&highlight=brick
This looks nice, thank you very much, I will try that.
Can somebody help me with finding the right files for my purpose?
(German T-Mobile branded HTC 7 Pro that should get an HSPL do install fully unlocked and cooked ROMs)
Thank you guys!
RootKidMitch said:
This looks nice, thank you very much, I will try that.
Can somebody help me with finding the right files for my purpose?
(German T-Mobile branded HTC 7 Pro that should get an HSPL do install fully unlocked and cooked ROMs)
Thank you guys!
Click to expand...
Click to collapse
i dont think you need a t-mobile ROM, all you need is just do to a gold card SPL bootloader downgrade to 1.22 and then flash any stock signed rom which you have here on the forum, just search for "htc 7 pro stock rom" after that you can do a rspl and then a hspl. after that a custom rom for htc 7 pro. i have the New Tech ROM from ansar which is Tango 8773. unlocked and very good. no problem with this rom. and the best is it stays unlocked even after a hard reset!
if you dont have cables for gold card method, try ansars htc SLSPL (Stock limited SPL) and after that stock rom for htc 7 pro - rspl - hspl - custom rom there is a tutorial for this here on the forum just search for ansar SLSPL htc or something like that.
i think the gold card method is the easiest, i've done it several times, even after i flashed an rom to SPL (without rspl - hspl) and bricked my device! only the gold card method helped me out there. no i have HSPL 1.22 an Tango 8773 and all working.
Thank you guys for the answers.
I managed to build my own Y-Cable. When I plug it into my running PC and my running 7 Pro, the battery is loading. So I think the cable itself should work.
I downloaded this rom "RUU_Gold_HTC_Europe_1.22.401.01_Radio_5.63.09.13_3 a_22.36.50.15U_by_ansar" to downgrade SPL. Then I applied the goldcardmethod as "Budniu" explained it in his video. One Problem in that context could be that I only found a 2GB SanDisk-MicroSD-Card.
Anyway, when I first entered the USB-Hostmode for the first three or four times, nothing happened. After unpluggin the card several times, the 7 Pro finally showed "Loading", then "checking" and in the end "not allow".
What do I do wrong? Is it the wrong ROM or do I have to have a 1GB SD-Card?
Please help me!
Kindest regards!