Database Info

cid unlcok for chipset 4?

I need to cid unlock my prophet(s200,jamin)
I tryed with the software in wiki-developers
but it makes problem does anybody help me by cid unlocking for chipshet for 0001

http://blog.neten.de/read.php?66
???????????????????????????????

A little bit difficult for us to understand the link you posted. Is possible to update in english? Thank you in advance!

yes please if this is a way to cid unlock a G4, can someone please translate?

not really a solution
I read the entire post. It is NOT a CID unlock, basically the guy just ran aWizard and ignored the error of CID unlock error. The screen says CID unlock success, but it doesnt really unlock CID. rest explains what roms he used to update his O2 xda. Mostly are in Simplified Chinese ROM. Nothing special or new in that post. Search is still on.

Kensu, thanks for your time!

If you want to install a new ROM then there is no need to unlock CID. This procedure explains a method for updating all components except IPL/SPL on a Wizard. The same procedure and the same tools in the document can be used on a Prophet.
Pay attention to the warnings on the first page though. The procedure is not trivial so make sure you know what you are doing before you actually do it!

abubasim said:
If you want to install a new ROM then there is no need to unlock CID. This procedure explains a method for updating all components except IPL/SPL on a Wizard. The same procedure and the same tools in the document can be used on a Prophet.
Pay attention to the warnings on the first page though. The procedure is not trivial so make sure you know what you are doing before you actually do it!
Click to expand...
Click to collapse
Has someone already successfully tried this procedure on a prophet?

inshar said:
Has someone already successfully tried this procedure on a prophet?
Click to expand...
Click to collapse
Yep! Works well, as long as you try AKU2.x or better for the OS module. It didn't work with i-mate's old 1.2 ROM for JAMin but that just confirms what the article says. Everything else I've tried so far worked.

abubasim said:
Yep! Works well, as long as you try AKU2.x or better for the OS module. It didn't work with i-mate's old 1.2 ROM for JAMin but that just confirms what the article says. Everything else I've tried so far worked.
Click to expand...
Click to collapse
I can confirm!
I have used the procedure tonight and all worked perfectly!
Enough simple and with no unpgrading problems!
Now I have Italian rom on my device!
Thanks for help!

Prophet ( Qtek S200)
Hi inshar.
Have you tried with prophet with JAMin_ITA_2130921_21309111_020720_ship ROM ?
Do the settings remain the same as k-jam (ex. OS start address 80040000, HTC logo ?
Thank you
Merlino

Merlino said:
Hi inshar.
Have you tried with prophet with JAMin_ITA_2130921_21309111_020720_ship ROM ?
Do the settings remain the same as k-jam (ex. OS start address 80040000, HTC logo ?
Thank you
Merlino
Click to expand...
Click to collapse
Yes that rom and the configuration is the SAME of K-Jam (i had a 02 Mini S before thiefed :-(( )

Thanks
Great !
It works... Thank you so much
Merlino

Hello all,
i'm new here and i dont understand something :
following this tutorial can i install on my o2 neo an italian 2.13 rom instead of the english 2.15 i am currently using?
in other words can i "down"date my rom from 2.15 to 2.13?
another question: wich is the best italian rom so far?
i've managed to find only a 2.13 around,are there any newest italian rom around?
thanks

Probably I made something wrong, my device is DEAD!!! I have been severals hours to fix it but no way.
Now I can see the device in boot loader mode (3 colors)
IPL 1.00
SPL 2.15.0001
How can I recover the installation?

You have missmatch in IPL and SPL version.
Your IPL is corresponding to DOC G3, but SPL DOC G4.
This should not be the case. What was your original DOC?
Do you have USB connection when in rainbow screen?
rgds,
fdp24

No, I don't have a USB connection. Tonight I was thinking and I going to try to put the ROM stop at bootloader. Let me try it now. As soon as I have some news I'll post it. Thanks!

I just finish to download the Dopod 818 Pro Rom stop at bootloader fix but now the problem is getting biger, I mean, the battery is empty, so I can not charge the device with the USB or AC cable. I have to find a battery to try with this Rom. Or go to the technical support and try to fix it.
The screen is on and of by it self efvery couple minutes (just for a while)

Finally I got a charged battery from my brothyer and I started to download the mentioned rom, but at 80% stop, I get an error message.
ERROR 326 Invalid Command. This NBF file cannot be used for your PDA Phoen. Please check your NBF.
How could I do? Suggestions???

I made a call phone to the service mantenience and I have a date to try to fix it. I'm affraid they are going to tell me something I don't like to heard, but...
Now I'm going to start a new life without my Prophet for a few days, or at least, hope so.

Vox Update SPL (USPL) 1.16

Hi guys,
I've just implemented a Vox USPL which allows you to flash any Vox ROM updates, i.e. you can flash any *official* ROM even if your phone's model and vendor ID doesn't match. It's confirmed that you can also flash cooked ROMs
This SPL is based on original Vox 1.16 SPL but includes 3 patches:
1) g_cKeyCardSecurityLevel = 0 (set 32)
2) Does not check Model & Vendor ID
3) Does not check signature*
(*) code must be formally signed i.e. contain properly-formatted signatures on the right places, however no checking is performed against them.
This means you can flash ANY ROM to your Vox after running USPL on it, no need to pay for CID unlock anymore!
The USPL will *not* help you to SIM unlock your device. You still have to pay for that.
The USPL runs in RAM and is *not* flashed to your device, so there is no risk there. Once it runs you can run any official Vox ROM update utility.
The USPL does *not* permanently CID unlock your phone, like the CID unlocker from imei-check or so.
After you flashed a ROM your phone is again CID locked. Each time you wonna flash a ROM with a different model and/or vendor ID (different from your phone) or a cooked ROM, you must run the USPL again and then flash the ROM.
It's beta and untested and the risk is entirely yours !! Don't blame me if you brick your phone
EDIT:
You can now also flash the USPL allowing you to flash any unsigned (cooked ROM or ROM module, e.g. radio or OS) or signed ROM with any model/vendor ID. The USPL substitutes your SPL until you perform a full ROM update. Consider it as an extra insurance in case something goes wrong with flashing cooked ROMs or any other ROM update !
Instructions:
1. Run the USPL (Vox USPL- CID BYPASS.zip)
2. Run the ROMUpdateUtility.exe (Vox-USPL-RUU.zip)
Have fun,
JockyW
The attachments:
SDA_ApplicationUnlock.zip : application unlocker if u need it
mtty1.42.zip : terminal emulator (not neccessary if u only do ROM updates, but if you wonna play with the bootloader commands you need it)
Vox-USPL-RUU.zip: flash version of USPL (Note: you must first run USPL from "Vox USPL- CID BYPASS.zip" before you can flash it with ROMUpdateUtility.exe from Vox-USPL-RUU.zip !!!)
Vox USPL- CID BYPASS.zip : instructions included
Credits: in particular to pof. This USPL and also the one for Excalibur is based on his USPL for the Elf. See here

I think this is one of the most fantastic news of the century!!!
Finally some cooking can start on this little device.
Thanks again,
Ka.

noob question
what the difference between sim unlock and cid unlock?

This can be found in various threads around here, anyway.
SIM Lock - You can't use a SIM from a different provider than the one who sold you the phone.
CID-Lock - You can't flash your phone with a ROM which hasn't been cooked by your provider (or manufacturer for HTC unbranded phones).
Ka.

jockyw2001 great but make one for htc oxygen pls.

htc s710 - rom
confirm this is working very gd
thanks for all yoru help and support to this fourm

hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.

madds said:
hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.
Click to expand...
Click to collapse
Same here

anyone online right now wanna drop me a line about this... what do I do exactly with the ruu file. Do I place rom image in that folder while runnning update???

so i followed the instructions and executed the cid bypass(installed itsutils and haret). once i get to the end it says use mtty or flash with RUU. so I attempt to flash right after (am I supposed to flash while the screen is black) but its gives me a connections error. I figure its because the phone is off. So I turn it on and update with the RUU again but only make it to 3% before I get a invalid vendor id. Would anyone care to comment on how I can flash this vox to the dopod rom...

madds said:
hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.
Click to expand...
Click to collapse
acid74 said:
Same here
Click to expand...
Click to collapse
To the users who had the same problem as me I am currently flashing my phone and I managed to get past my problem by using the SDA Application unlocker on my vox. I always thought that HTC were already application unlocked. Was going crazy for a while but I guess I should've followed the instructions step-by-step regardless of what I thought.
Big up to jockyw2001(and of course pof for without him alot of us would still be using shipped rom) for this wicked tool.
Cheers

neptune said:
To the users who had the same problem as me I am currently flashing my phone and I managed to get past my problem by using the SDA Application unlocker on my vox. I always thought that HTC were already application unlocked. Was going crazy for a while but I guess I should've followed the instructions step-by-step regardless of what I thought.
Big up to jockyw2001(and of course pof for without him alot of us would still be using shipped rom) for this wicked tool.
Cheers
Click to expand...
Click to collapse
Thanx man,last night i figured it out too......hows the dopod ROM??

acid74 said:
Thanx man,last night i figured it out too......hows the dopod ROM??
Click to expand...
Click to collapse
I only got this phone so I could upgrade it for a friend to stop the boot loop. It seems to have fixed that problem so I guess it's better than the other roms. On the other hand I can't stand smartphone's so my suggestion is to ditch your SP and switch to PPC . Also I read before hand that this ROM doesn't include Windows Live Messenger but it is included in the rom. Just thought I'd let u guys know.

input please
Just ran into another problem and would appreciate some input. I understand that USPL only works for one flash...but I wasn't aware that a hard reset counted as a flash. Regardless my device hung at the dopod boot screen after a hard reset. Is this normal after using USPL on a device, and if so does this occur with all devices??? I would hate to give a phone back and have to tell the person that they can't perform a hard reset...

neptune said:
Just ran into another problem and would appreciate some input. I understand that USPL only works for one flash...but I wasn't aware that a hard reset counted as a flash. Regardless my device hung at the dopod boot screen after a hard reset. Is this normal after using USPL on a device, and if so does this occur with all devices??? I would hate to give a phone back and have to tell the person that they can't perform a hard reset...
Click to expand...
Click to collapse
If you flash a full ROM the SPL is overwritten with the one in the ROM (Dopod = 1.19). Nothing to do with USPL. Booting can take a long time after hard reset. Unplug battery and try again.

jockyw2001 said:
If you flash a full ROM the SPL is overwritten with the one in the ROM (Dopod = 1.19). Nothing to do with USPL. Booting can take a long time after hard reset. Unplug battery and try again.
Click to expand...
Click to collapse
Thanks, I got it to work eventually...Good to know USPL doesn't effect hard resets, I guess you learn something new everyday.
If I had to take a guess before hand I'd figure a SP would boot faster than a PPC, but I realize now that I'd be wrong...
thanks to all for the help, I can finally return this Vox back to its owner
cheers

Hi
I flashed my E650 in French with the swissrom (present on FTP), all works !
an idea to change the logo operator to HTC original ?
thanks

thought I fixed the problem. seems as if after a day it just hangs at the dopod screen. It was working fine everytime I had it. As soon as I give it back it seems to hang. Guess ima just flash it back to the HTC rom, too much hassle for just $20.

why SDA_ApplicationUnlock.zip can't unlock my Orange SPV E650?

Successful rom flash done on a spv e650 on a sim unlock device UK orange

Vox Italian official ROM needed - Vox Bricked.

Hi All,
I need an Italian Official VOX ROM or instruction how-to flash unsigned ROM.
Please note that I have flashed a wrong ROM and Activesync does not work, I can access only though bootloader.
Can anyone help me?
Thanks

Here is something you could try : http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
Try naming the VOXIMG.nbh instead of HERMIMG.nbh.
but I really don't know if this can work. most likely not in fact since I haven't seen it described for the vox on these forums..
Sorry I have really no experience in bricked devices. Well I bricked mine several times but usb connection still worked through bootloader, so I could start ruu updater when in bootloader mode and it worked fine.

I have bricked my Vox making custom roms, but have found that even though i can get into the bootloader and run up the RUU updater, every time i go to flash a rom i get errors saying wrong VendorID etc... this is because the rom i flashed had different ID's to the original HTC ROMS. Maybe you are signing them different to me?
Please help!

Hi Doctor,
it does not work with VOX.

iceberg2403 said:
I have bricked my Vox making custom roms, but have found that even though i can get into the bootloader and run up the RUU updater ...
Please help!
Click to expand...
Click to collapse
i`ve made the same mistake (flashed a ROM cooked by me) ... but prior to flash my phone i was lucky enough to use USPL 1.16 to permanently flash my SPL to 1.16 (i`ve used both archives Vox USPL-CID BYPASS.zip and Vox-USPL-RUU.zip) instead of 1.27 (original, vendor locked).
On the XDA ftp is a italian ROM if i`m not mistaking, did you try it ?
try this ... i`m not sure it will work.
Make sure you have disabled the USB connection in ActiveSync:
File --> Connection settings --> uncheck "allow USB connections"
1. get into booloader mode
2. connect with mtty
3. write password BsaD5SeoA
4. try to run the USPL 1.16 now ... (i`m just guessing)
if it doens`t work reset the phone and repeat step 1. and 2. and continue with:
3. write password BsaD5SeoA after that ruurun 0
4. try to run the USPL 1.16 now ... (i`m just guessing)
alternatively instead of USPL you can try to run the italian rom from the ftp.
i`ve managed to save my phone doing steps 1, 2, and 3 (not sure which one worked) from above and then flashed with ARA ROM ... but keep in mind my SPL was 1.16.
hope this helps

I'm italian could I help you...
Hi i'm italian and i'm totally nwe on those things...eheheh i haven't yet underrstand what those cooked roms are..but I have an italian s710 with the original rom...with some software on it..If i could help.... let me know..maybe send me a PM or a mail through the forum mail system..
ciao ciao fammi sapere
bye bye just let'me know

with TheBo`s help the problem is almost solved :d

My intention was just to ask if a backup of my original HTC VOX (unbranded) could help...sorry...next time I will not do the same mistake.

SPL
Hi,
unfortunately this does not help because my VOX is CID locked “g_cKeyCardSecurityLevel = FF” and Activesync does not work, for this reason I’m not able to flash any unsigned rom.
My SPL is 1.27.
I have tried to flash 1.16 but the procedure does not work.
It is a way to CID unlock my VOX from bootloader?
Can anyone cook a signed Italian ROM?
Thanks.

maybe TheBo`s ROM will work for you

Nop,
it does not help until my VOX is unlocked...

alllof said:
Nop,
it does not help until my VOX is unlocked...
Click to expand...
Click to collapse
if the Vendor ID is the same it will work
my Y! ID is maxtry80, TheBo and alllof contact me there, maybe i can help you

If you would to help us you can try to cook a signed rom from the dump in ftp://xda:[email protected]/Vox/ (file name: s710 rom 1.15.408.2 (italian + uk eng + us eng).rar) or give to us instructions how to do it.
Thanks for your help.
Regards.

i`ll try to help you ... i`ll be back in couple of hours with results

Thanks for your help!

check you pm!

did it work?

i tried the method posted a while back with no positive results .... yet
I was just wondering, i looked at the bootloader and it says Vox SPL 1.15 so this is the version i am using and it doesnt let me flash another vendor id rom...

VOX Briched.
Nop,
it does not work. I have sent my device to HTC...

Can you tell me how it works out?? I am hesitant to send mine to HTC (i had to import this phone) which will mean i have to pay heaps for shipping... and even then i dont expect them to replace it because the last rom i flashed had a different splash screen (silly me ) this will be obvious to them and therefore wont replace mine because i tampered with the rom.

[Q] HTC Shipped Mango ROM ERROR. Help?

I was attempting to flash the new Shubert HTC Shipped Mango ROM on my HTC HD7 which was running the DFT FREEDOM 7720 ROM.
I ran RSPL. Started to flash the ROM. Then it stopped at 7% with an "Invalid Device ID" error.
Now my phone only powers into bootloader mode and not into the OS. Also, the SPL went from 3.1 to 4.5 so now I can't flash anything over it.
Can anyone tell me how to get my SPL back to 3.1? Or am I in trouble?
Thanks.

sorry but u r in trouble didnt u read the warning on the dft thread...
"WARNING TO ALL:
Do NOT use RSPL / HSPL with Mozart 4.XX and other RUU ROMS with MANGO.
All WP7F devices affected: MOZART, GOLD, SCHUBERT, MONDRIAN, SPARK!
It will damage your device. Not a joke"
now u must wait until a solution is found sorry.

You should still be able to flash a rom to your device. It must be a rom that was originally made for your device. Ex. Tmobile us rom to an American tmobile hd7.

Thanks for your reply.
Technically, I used RSPL when it was still on 3.1. When the error occured at 7%, my phone rebooted into bootloader mode with spl 4.5 and is stuck there. And I haven't used RSPL / HSPL since.
In the original thread I read a post that read,
"Beware that this will change your spl to 4.5, if you want to go back only flash a ROM that is specific to your device, like mine is TMOUS device id .531
Even I had unbranded it HSPL way, that doesn't mean I lost my device ID. So in order for me to use HSPL again, I need to flash the TMOUS .531 radio version"
These english translations are hard to decipher. Which is why I misunderstood the warnings to begin with. Any help is appreciated.
Regards,
tiu

jahpsphacker said:
You should still be able to flash a rom to your device. It must be a rom that was originally made for your device. Ex. Tmobile us rom to an American tmobile hd7.
Click to expand...
Click to collapse
If I run RSPL to flash a stock TMOUS rom, it will ask for my SPL version number. But SPL 4.5 is not an option in the pull down menu. It only goes up to 3.4
Do you have any advice for which I should choose?

the point is your phone needs to be spl when flashing mango roms ,it can not be rspl/hspl... was your phone spl when u attempted to flash the mango rom ?

matiu_00 said:
If I run RSPL to flash a stock TMOUS rom, it will ask for my SPL version number. But SPL 4.5 is not an option in the pull down menu. It only goes up to 3.4
Do you have any advice for which I should choose?
Click to expand...
Click to collapse
does ur phone connect to computer ? does it say usb on bottom of bootloader screen? if it does u can flash stock tmous rom no need for rspl.

bigtime1 said:
the point is your phone needs to be spl when flashing mango roms ,it can not be rspl/hspl... was your phone spl when u attempted to flash the mango rom ?
Click to expand...
Click to collapse
no, unfortunately it was RSPL
It is connected to my computer and Active Sync is working in USB mode.
It currently reads SPL 4.5

matiu_00 said:
no, unfortunately it was RSPL.
Click to expand...
Click to collapse
there was ur problem it needed to be spl but if ur phone can still connect to computer it wont hurt to try and flash tmous stock rom pre-nodo or nodo...

bigtime1 said:
there was ur problem it needed to be spl but if ur phone can still connect to computer it wont hurt to try and flash tmous stock rom pre-nodo or nodo...
Click to expand...
Click to collapse
Thank you again for your help. One last question, if I try to flash a stock ROM should I go with my original SPL version 3.1?
Or should I try to go with 3.4 which is closer to 4.5?
[edit]Nevermind. You said no need for RSPL. Think I finally get that part.
[edit]It worked! Thanks again for your help. Gotta love the xda community.

It worked! Without RSPL, I've flashed a TMOUS pre NoDo stock ROM and my SPL version is back to 1.5
Thank you again for all of your help. It is much appreciated. Take care!

rspl/hspl is only needed to flash custom roms...the tmous stock rom will include original spl ... i think u r lucky the flash of the mango rom failed cuz if it didnt ur bootloader wouldve been inoperative..

[Q] Install RSPL on HTC 7 Pro

hi @all
my english is not so good.
But i try it and hope you can help me.
I have tryed to Jailbreak my Phone and install RSPL for installing the Freedom Rom.
This DFT-Tool said it´s all ok. Congrantulation. My Phone will Restart in RSPL Mode. But my Phone do nothing.
Now i dont know what i have to do. I cant update the Phone on Mango because i see an Error in Zune and i cant install an other Rom too.
Here you have the dates from my HTC 7 Pro.
Bootloader:SPL - 1.7.2250.0
MID: PC921000
my current Windows Phone 7 Version: 7.0.7392.0
I have searched in google but i cant find my Bootloader version.
When i Start my Phone i see in the upper left corner my Bootloader version an Modem.
you can see it in my Attachment.
Hope you can help me because the German Forums can´t do this.
Thx

Can noboddy help me?
I need Mango to use Whats app
I don´t wont a jailbreak anymore.

Cfire said:
Can noboddy help me?
I need Mango to use Whats app
I don´t wont a jailbreak anymore.
Click to expand...
Click to collapse
Hi
my English is not the same very good
I think that you can help this way the firmware
It's not too hard and all you can do at home
http://forum.xda-developers.com/showthread.php?t=893152
This way you can put absolutely any firmware

your bootloader is SPL version 1.7
simple try change to HSPL 1.7 (if supported or try use closest to your)
http://forum.xda-developers.com/showthread.php?t=1195647
after instaling HSPL, use only Mango custom ROM's with disabled Zune update (this is important to prevent (H)SPL damage and halfbrick device).... custom ROM also is full unlocked. after upgrade to Mango, do hard reset and your device is fully ready to use (and also can use custom cab files for customization's)
http://forum.xda-developers.com/showthread.php?p=17396493#post17396493

You can try do downgrade to official preNoDo or NoDo version from that topic: http://forum.xda-developers.com/showthread.php?t=1013810 or http://forum.xda-developers.com/showthread.php?t=995999 If you install these ROM you change SPL to 1.22 or 1.24 and you can install HSPL and DFT ROM.

Thank´s
i will try the second way from Budniu at first.
I hope it works.
--edit--
So i install the first version from Budniu. Now im on 7.0.7004.0.
But my SPL is the same as before.
@dxdy
i can´t install HSPL. Thats my problem.
When i try to start RSPL to install HSPL, it say´s "Congrantulations" but my device is not boot in RSPL.
"On screen you should see "RSPL" instead "SPL-"
No i don´t see it. My Device stays on SPL.

Sorry for this second Post.
I Think this information can be important to find a possible solution.
Indifferent what Version is installed, i have every time these four apps on my device.
But i never downloadet this apps.
Thanks for your effort .

Cfire said:
@dxdy
i can´t install HSPL. Thats my problem.
When i try to start RSPL to install HSPL, it say´s "Congrantulations" but my device is not boot in RSPL.
Click to expand...
Click to collapse
try few times... unfortunately i cant install R/HSPL to my demo 7 Pro but on friends Mozart also dont want run RSPL and tried few times and worked...

Will it work on Windows XP?
Because i have tryed it mutch times.
--edit--
So i try it with windows 7 too but it works not
I see everytime the congrantulations screen only and the phone do not restart in RSPL i´ve try with 1.22 and 2.10 both versions brings the same result.

Ok I think your device is branded. I don't know what is your operator ? T-Mobile or o2. You have to read: http://forum.xda-developers.com/showthread.php?t=1307542, maybe one ROM from these help to you.

ohhh sorry i fortgotten to say this detail.
Yes my device is o2 Brandet.

And you must try ...
Budniu said:
Ok I think your device is branded. I don't know what is your operator ? T-Mobile or o2. You have to read: http://forum.xda-developers.com/showthread.php?t=1307542, maybe one ROM from these help to you.
Click to expand...
Click to collapse

great job thank you

hi @ all
all your roms can´t help me to update my Phone.
So i send it in to repair and now it works with Mango.
Thank you all at the same.

Cfire said:
Can noboddy help me?
I need Mango to use Whats app
I don´t wont a jailbreak anymore.
Click to expand...
Click to collapse
Upgrade SPL to SPL_Signed.nbh from Ansar 1.22 Europe ROM by GoldCard (ROM O2 1.24 version contains SPL 1.07 too!). I had 1.07 after unbrick too, now I have HSPL applicable 1.22. M.

I had the same problem and created a different thread (not realising it was the same)
the solution is here http://forum.xda-developers.com/showthread.php?t=1505047
in effect, you need to flash a 1.22 rom, like, RUU_Gold_HTC_Europe_1.22.401.01_Radio_5.63.09.13_3a_22.36.50.15U_by_ansar
onto your device before you can then use the dft tool and then flash a custom rom.
Although it may be that there was no 1.22 rom for your german device at the time you posted...

感谢分享！！！