Folks,
with custom ROMs based on 2.3.4 I experienced that I can no longer connect my Sensation via USB harddrive mode to my car's USB.
It worked with stock ROM 2.3.3, even though I had to deactivate USB debugging and turn it on again...
Yesterday I had the time to cross check:
- restored my stock ROM 2.3.3 NAND et voila: USB connection to car is working
- installed 2.3.4 OTA (Vodafone DE): USB connection to car not working...
Connection via USB to PC is working without any problems...
Anyone else experiencing probs here?
(my car is a BMW with the latest navigation system btw)
++ EDIT ++
Problem solved with Pyramid3D 7.2.0 ROM based on 2.3.5
See post 11 in this thread
- mwie -
mwie said:
Folks,
with custom ROMs based on 2.3.4 I experienced that I can no longer connect my Sensation via USB harddrive mode to my car's USB.
It worked with stock ROM 2.3.3, even though I had to deactivate USB debugging and turn it on again...
Yesterday I had the time to cross check:
- restored my stock ROM 2.3.3 NAND et voila: USB connection to car is working
- installed 2.3.4 OTA (Vodafone DE): USB connection to car not working...
Connection via USB to PC is working without any problems...
Anyone else experiencing probs here?
(my car is a BMW with the latest navigation system btw)
- mwie -
Click to expand...
Click to collapse
have u tried disabling the usb debugging mode under the settings, aaplications, developement
biojo said:
have u tried disabling the usb debugging mode under the settings, aaplications, developement
Click to expand...
Click to collapse
Yep!
With 2.3.3 I had either to disable it when it was enabled or vice-versa to get it running... but it ran!
mwie said:
Yep!
With 2.3.3 I had either to disable it when it was enabled or vice-versa to get it running... but it ran!
Click to expand...
Click to collapse
What about disk mode?
Sent from my HTC Glacier using xda premium
Phateless said:
What about disk mode?
Sent from my HTC Glacier using xda premium
Click to expand...
Click to collapse
You mean if I did select disk mode when pluggin the cable in...?
Dude, sure I did!!
there was a issue with with non stock kernal, maybe u need to update to latest, alternativly there was a app listed in mikes rom, to over come the problem
I am on pure stock...
Using a non-stock kernel... Maybe an option... But browsing through the threads I didn't find anything related to this issue - remember, harddisk mode with PC is working.
sent from XDA App on HTC Sensation
mwie said:
You mean if I did select disk mode when pluggin the cable in...?
Dude, sure I did!!
Click to expand...
Click to collapse
So you tried all the modes. Weird...
Did you have to do any configuring on your HU to get it to recognize the phone the first time?
Maybe clear those configurations on the HU and start over?
Sent from my HTC Glacier using xda premium
Yep, tried everything possible...
No config needed on car, plug-in and off it went with 2.3.3 - just toggle USB debugging on or off in phone...
sent from XDA App on HTC Sensation
mwie said:
Yep, tried everything possible...
No config needed on car, plug-in and off it went with 2.3.3 - just toggle USB debugging on or off in phone...
sent from XDA App on HTC Sensation
Click to expand...
Click to collapse
Weird....
Sent from my HTC Glacier using xda premium
Phateless said:
Weird....
Sent from my HTC Glacier using xda premium
Click to expand...
Click to collapse
Yes... and still driving me crazy!
Will give P3D ROM based on 2.3.5 a try...
++ EDIT ++
Pyramid3D ROM 7.2.0 installed
>> ABLE to connect with my car in disk mode again!!
This time even without switching debugging on or off
Hope it stays this way!!
Dies anyone know which system apk the USB disk Feature is in?
Would try to compare 2.3.4 with 2.3.5...
But maybe it's a kernel issue as well!?
sent from XDA App on HTC Sensation
Related
I have the latest htc drivers installed.
htc sync uninstalled.
restarted computer.
ran the programs as admin(windows 7 64bit)
I tried flashing a new radio, but the cmd said that my device cant be found.
I also tried using hack tool kit 12.3 to re-root it. it said it cant be found.
no 3rd party programs is working on my htc inspire.
i never had this kind of problem before.
rom: miui 1.9.2
kernel: lord 7.1 cfs
Not to be insulting by asking such a question, but do you have USB-debugging on?
Jake33108 said:
Not to be insulting by asking such a question, but do you have USB-debugging on?
Click to expand...
Click to collapse
Ye s I do
Sent from my Inspire 4G using XDA App
Do you have allow third party apps checked in settings?
And why not dl the files with your phone and flash that way?
Sent to you by ......
This p-o-s I'm addicted to, and my woman is jealous of.
Oh I fixed the problem. I just reinstalled the drivers. Idk why it didn't work suddenly.
Sent from my HTC Desire HD A9191 using XDA App
Hi All,
I've playing with a number of Roms and afew of them have the same problem in which the Sdcard cannot be accessed by the USB cable while trying to update it through my PC.
At present I'm using Kyorarom's and that has the same problem.
Does any one know why this is, and is there a fix for this problem.
Many thanks
Whimick
Try using an app called DualmountSD also don't forget to enable USB debugging
Sent from my GT-I5800 using Tapatalk
Whimick said:
Hi All,
I've playing with a number of Roms and afew of them have the same problem in which the Sdcard cannot be accessed by the USB cable while trying to update it through my PC.
At present I'm using Kyorarom's and that has the same problem.
Does any one know why this is, and is there a fix for this problem.
Many thanks
Whimick
Click to expand...
Click to collapse
you should be asking here:
http://forum.xda-developers.com/showthread.php?t=1230801
this is kyorarom support thread
Sent from my hybrid sg3
multibooted
Kyorarom 0.3.2 powered by
g3mod 2.0 OC
You guys are forgetting the phone utils app. Dial *$7284#* and change both to PDA.
Sent from my GT-I5800 using XDA App
Thank every one
I guess I will have wait to see if there is a fix for this issue
whimick
HI
When i face this issue, i close all apps with task manager, clear ram, wait for sd to scan till 100% and attach the cable again.
Easiest and best way out is to use DualMount SD app.
its one of the best app to use, you dont have to then wait for card to get unmounted and then wait again after mounting to let scan complete before being able to use it with the lag.
Hello,
I installed Primo-S v4.1,since,the USB mass storage device doesn't work.
Do you know how to fix it ?
Thx
Googley35 said:
Hello,
I installed Primo-S v4.1,since,the USB mass storage device doesn't work.
Do you know how to fix it ?
Thx
Click to expand...
Click to collapse
Doesn't work on any ICS ROM at the moment - why can't people read the damn threads before posting the same stupid questions over and over again?
Ignore this and see my post below and the ones from Skanob and Dan-Fish
no possibilities to access sdcard without using the bootloader?
Googley35 said:
no possibilities to access sdcard without using the bootloader?
Click to expand...
Click to collapse
I'm going to ask a really stupid question and risk looking like an arse.
I have read, over and over again, that USB Mass Storage isn't supported under ICS. I'm not actually sure that this is true. Assuming that USB Mass Storage refers to the ability to access your SD-Card by connecting your phone to your PC using a USB cable then it works perfectly with MIUI v4 and I'm fairly sure it worked with Fallout (although I couldn't swear to that).
There was some confusion in the early days as it wasn't supported on the Galaxy Nexus, but this is actually because ICS only supports UBS MSM on devices with removable storage - they won't let you access the 'internal' memory with this process.
If Primo doesn't let you access the SD-Card in that manner then it suggests a problem with Primo - maybe caused by not having the official kernel v3 available to build off?
Ice.Cream Saga is an ICS rom whic fully supports USB Mass Storage.
Sent from my HTC Desire S using xda app-developers app
Works on all ROMs unless stated otherwise. I've tried it on fallout and it works perfectly
Sent from my HTC Desire S using Tapatalk 2
Ok thanks
Hey there,
I recently bought a ELM 327 OBD2 bluetooth connector for my car (china clone).
I connects and works flawless with my laptop via bluetooth.
While my p920 (v30b) keeps asking for the PIN, again and again and again.
I tried making bluetooth visible, I tried to start bluetooth before starting various apps and from within various apps.
Just using the bluetooth option from ICS I can get them paired but ANY OBD2 app keeps asking for the PIN. (which is 1234, as I can poair it via the bluetooth menu)
Some apps give an error after some time, like, "make sure no other app uses bluetooth right now" or "connection could not be established" etc.
I read about some ICS / bluetooth problems via google, especially on Sony Xperias with iots Ant+ feature. but I wasnt able to find anythign else then "compatibility issues" between "Bluetooth item 1" and "Bluetooth item 2".
Any ideas ? Maybe someone can suggest me a "cheap" usb cable for my p920 for using it with "obd apps" ?
Instal JB 4.1.2 as second rom and use it from there. It will work
Sent from my LG-P925g using xda app-developers app
p-vlad said:
Instal JB 4.1.2 as second rom and use it from there. It will work
Sent from my LG-P925g using xda app-developers app
Click to expand...
Click to collapse
Ouch... :/
Then, what the hell went wrong with bluetooth pairing on ics ?
Maybe there are more bluetooth-pairing apps that might help me before flashing jb ? :S
I just went back to stock rom and im happy with it...except for this bluetooth pairing...damn... :,(
Can I just plug in my cheap usb odb cable into my p920 ? (using usb to mini-usb adapter) and use torque to connect via usb ? Or wont my p920 understand the "fitd" chip/cable via adapter ? Or wont such a cable/adapter solution work at all ?
Did you try "1234" as the PIN? I have bluetooth OBDII tool as well.
Sent from my LG-P920 using xda app-developers app
Dr. Mario said:
Did you try "1234" as the PIN? I have bluetooth OBDII tool as well.
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
Forget it...
you can pair it - no problem... but you can not keep the connection. it ask for pin right you start OBDII application. then start to ask for pin every 5 seconds.
the only way - back to GB or install JB 4.1.2 like a second ROM or JB 4.2.2 as a first ROM (the kernel for the CM10.1 as second rom give a broken BT too - look my signature)
So I suppose it is kernel related issue too.... but I am not sure.
Possibly. Did you try the kernels? I am using iodak's CM10 kernel, BTW.
Sent from my LG-P920 using xda app-developers app
Dr. Mario said:
Possibly. Did you try the kernels? I am using iodak's CM10 kernel, BTW.
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
No... on the manual for dual boot stay that i have to use CM10.1 kernel for the CM10.1 ROM... so...
better use CM10 for OBDII devices till somebody repair the ICS version.
Ah, I see. I am using regular CM10, BTW.
Sent from my LG-P920 using xda app-developers app
Hi
I bought some case with keyboard for my tablet. Everything working great, except when I turn screen off it goen on every few second if I have keyboard stuck in mini usb.
Every few second I have usb check or somethink to wake tablet Why and how can I fix this?
thanks
have you change a usb?
Could this be like phones waking on charge, is there a setting to turn this off?
Sent from my SM-G900F using XDA Free mobile app
just tried with other usb adapter. Still same **** :-[ So this shouldnt happened? When it is charging screen stays off
Send from my Z1C using tapatalk
Maybe a bug in the rom?
Try to find a custom rom for it or search for the config files if is rooted
mrpostiga said:
Maybe a bug in the rom?
Try to find a custom rom for it or search for the config files if is rooted
Click to expand...
Click to collapse
It is not rom related. Still have official rom. Dunno is there maybe any configuration for waking up if usb keyboard is connected?
I have 4.4.2 official rom.