Guys I have a problem .. my nexus one says "Emergency calls only" why? please help!
You request help and you give no info...
What have you been doing with your phone?
Is it stock? Have you changed anything?
put the stock rom with odin (2.3.3) and does not read the sim
Why would you use odin with Nexus S....
What phone variant do you have and what file did you flash exactly?
EDIT: and by the way, you say Nexus One. This is the Nexus S forum.
I flashed several files .. this http://hotfile.com/dl/107603258/63c6336/I9023_EUR_GRI54_XXKB3.rar.html
and this: http://hotfile.com/dl/111962995/6937fb7/I9023XXKA3.rar.html
I have the same problem with
I have nexus S.. I was wrong
What variant of the Nexus S do you have? Shut your phone down. Then boot it while holding the volume up key. It should boot into the bootloader. Check the "carrier info" field.
I have the italian version i9023.. carrier info - eur
edit: bootloader versione: i9020ecc but i have the i9023..
OK, so you should try the following:
*) Install a full ROM via the stock recovery program. Download this http://android.clients.google.com/p...206299fe6.signed-soju-ota-121341.da820629.zip, rename it to update.zip and apply it.
*) If you still do not have network, check if your IMEI is intact.
*) If you have a valid IMEI and you still have network problems, dial *#*#info#*#* and select CDMA/GSM PRL from the menu.
I flash with clockwork or odin?
It's better to flash with stock flash. If you have written clockworkmod over it, clodkworkmod should be OK as well.
Correct me if I'm wrong. It can not be a problem of baseband ??
Not probably not.
It should be a problem with the EFS data. Maybe wrong NV data in the EFS folder.
Let's see if doing these steps cures it.
Otherwise, the device has to be serviced by Samsung.
not working .. but instead of "info" I have to enter the imei?
You have to enter *#*#4636#*#*
Guys, try to help my friend solve her phone. He no longer has the guarantee and then Samsung can not fix .. Write down all the things you can do to try to make it work. Soft reset, modding etc.
yeeeeeeeeeeeees now 3g is aviableeeeeeeee
georgemv said:
You have to enter *#*#4636#*#*
Click to expand...
Click to collapse
It works! Thank you all!
Good for you.
Stay away from ODIN, it's a problem source for the Nexus S.
s should not be more .. there is another solution? : (
Please, i don't have a guarantee
Related
hi i know there are a lot of threats already of this but now i bring a posible solution to this problem
in my case is no hardware problem cuz i change it, i have falshed a lot of modem and still says no sim... insert sim
btw the phone is unlock. so i decide to leave my skyrocket as nonfuntional phone but i start tu play with the service mode
and suddendly recognize the sim card and get data and works great. but it only works until you reset or power of the phone.
if that happend you have to do my steps again and that way you get sim recognition again.
i post this cuz im not a developer i dont know to much about debuging mode so plp that know that can see my steps a find a permanent solution
to the no sim error on skyrocket.
before start you have to inserte the FUNCTIONAL SIM CARD and power up the phone, it will power with no sim error
un dialer put *#197328640#
enter to debug screen 1
enter to phone control 8
enter to simulation 5
enter to modem Assert (reset)
at this point it appear to dont do anything but wait like 30 seg you will see the signals would restart and then do this
press menu and choose end
there it is now it recognize the sim...... so it possible is something with MODEM ASSERT (reset) but this is a solution not PERMANENT cuz when you reset o turn off the phone you have to do this again to get sim recognition again
so pliz devoleper make a PERMANENT solution with what i found
i try this with an att skyrocket with UCL2 baseband and UCL2 oem root ics
if you guys try this or think it its not possible just post me and on the weekend i ll upload a youtube video with all the steps and you ll see that it works
sorry for my english
Did you back up your efs folder?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
efs folder
Mervingio said:
Did you back up your efs folder?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
i bougth the skyrocket from ebay already with this issue so i dont have a efs folder backup. the phone is sim unlock
i also have another att skyrocket same version can a copy the efs file from it and back up on the defective skyrocket?
4italia4 said:
i bougth the skyrocket from ebay already with this issue so i dont have a efs folder backup. the phone is sim unlock
i also have another att skyrocket same version can a copy the efs file from it and back up on the defective skyrocket?
Click to expand...
Click to collapse
I think that would clone the imei and mac addresses aka bad news.
damn
lart2150 said:
I think that would clone the imei and mac addresses aka bad news.
Click to expand...
Click to collapse
well the defective skyrocket showns the imei and mac and its correct with the back label, i already backed up tha efs folder. i also try tu run the GSII_repair ant it says on step 3 nv_data.bak and his nv_data.bak.m5d is miss so i think that the problem is something with that. As i have the back up of my partial efs folder i think i can start playing around and see what i got cuz in my partial efs folder i have my imei backed up
what do you think?
4italia4 said:
well the defective skyrocket showns the imei and mac and its correct with the back label, i already backed up tha efs folder. i also try tu run the GSII_repair ant it says on step 3 nv_data.bak and his nv_data.bak.m5d is miss so i think that the problem is something with that. As i have the back up of my partial efs folder i think i can start playing around and see what i got cuz in my partial efs folder i have my imei backed up
what do you think?
Click to expand...
Click to collapse
IMO you need back ALL to stock and UNROOT then start from zero and see.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Mervingio said:
IMO you need back ALL to stock and UNROOT then start from zero and see.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
i thought he tried going back to stock
note: going back to stock will unroot , its just like getting it new from carrier, then see if your having sim card issues, btw which carrier are u trying to use, att?
mas movil
vincom said:
i thought he tried going back to stock
note: going back to stock will unroot , its just like getting it new from carrier, then see if your having sim card issues, btw which carrier are u trying to use, att?
Click to expand...
Click to collapse
the phone is ulock and in the efs folder have the imei folder and it showns the correct imei i already back up that folder. im trying to use a panamamenian gsm carrier. i got data internet can make calls can do everything but after y make the steps above after turn on the phone everytime
so this weekend i ll try some new stuff go to stock unroot rom try to merge the efs folder of the good one skyrocket without pasting the imei folder and lets si what i got
4italia4 said:
the phone is ulock and in the efs folder have the imei folder and it showns the correct imei i already back up that folder. im trying to use a panamamenian gsm carrier. i got data internet can make calls can do everything but after y make the steps above after turn on the phone everytime
so this weekend i ll try some new stuff go to stock unroot rom try to merge the efs folder of the good one skyrocket without pasting the imei folder and lets si what i got
Click to expand...
Click to collapse
leave the efs folder alone, just try the stock firmware as is to test
I too am having a problem with an AT&T Skyrocket that is rooted. I have been using it without a problem with Straighttalk's AT&T SIM. I decided to switch it to T-Mobile's $30 plan and unlocked the phone. It worked except service was extremely poor so I flashed the SKY ICE 4.2E R5goo.zip and SKY ICE 4.2-17.zip ROM (T-mobile radio). This didn't work any better so I read that I should try a couple different radios. I attempted to flash the Blaze radio since that seems to be the most popular and after rebooting I get the no SIM error. I have reflashed the stock ROM using ODIN (several times) and now neither the T-mobile or ST SIM is recognized.
I found this thread and attempted to go through the procedure but there is no modem assert reset on my menus.
Any help would be a appreciated.
truebeliever71 said:
I too am having a problem with an AT&T Skyrocket that is rooted. I have been using it without a problem with Straighttalk's AT&T SIM. I decided to switch it to T-Mobile's $30 plan and unlocked the phone. It worked except service was extremely poor so I flashed the SKY ICE 4.2E R5goo.zip and SKY ICE 4.2-17.zip ROM (T-mobile radio). This didn't work any better so I read that I should try a couple different radios. I attempted to flash the Blaze radio since that seems to be the most popular and after rebooting I get the no SIM error. I have reflashed the stock ROM using ODIN (several times) and now neither the T-mobile or ST SIM is recognized.
I found this thread and attempted to go through the procedure but there is no modem assert reset on my menus.
Any help would be a appreciated.
Click to expand...
Click to collapse
Did you notice in odin if it flashed files named mdm.bin and amss.bin? That's the radio.
In case you didn't (and didn't read the 1 stop thread), here are som links for radios:
A thread with only t-mobile radios (work on our phone too) and here are all the i727 radios.
Hopefully this will help, but really i'm just guessing, maybe someone else can spread some light on your problem.
I'm guessing (hoping) that for some reason the blaze radio failed to flash and so you got a corrupt radio. Then you flashed stock tar that didn't have modem in it.
lingowistico said:
Did you notice in odin if it flashed files named mdm.bin and amss.bin? That's the radio.
In case you didn't (and didn't read the 1 stop thread), here are som links for radios:
A thread with only t-mobile radios (work on our phone too) and here are all the i727 radios.
Hopefully this will help, but really i'm just guessing, maybe someone else can spread some light on your problem.
I'm guessing (hoping) that for some reason the blaze radio failed to flash and so you got a corrupt radio. Then you flashed stock tar that didn't have modem in it.
Click to expand...
Click to collapse
Yes it did flash the mdm and amss bins. I'm suspecting something happened to the SIM holder since it will not read any of the SIMs (Tmobile, ATT or ST) I tried in it and have another on it's way. I'll see if that changes the outcome.
4italia4 said:
hi i know there are a lot of threats already of this but now i bring a posible solution to this problem
in my case is no hardware problem cuz i change it, i have falshed a lot of modem and still says no sim... insert sim
btw the phone is unlock. so i decide to leave my skyrocket as nonfuntional phone but i start tu play with the service mode
and suddendly recognize the sim card and get data and works great. but it only works until you reset or power of the phone.
if that happend you have to do my steps again and that way you get sim recognition again.
i post this cuz im not a developer i dont know to much about debuging mode so plp that know that can see my steps a find a permanent solution
to the no sim error on skyrocket.
before start you have to inserte the FUNCTIONAL SIM CARD and power up the phone, it will power with no sim error
un dialer put *#197328640#
enter to debug screen 1
enter to phone control 8
enter to simulation 5
enter to modem Assert (reset)
at this point it appear to dont do anything but wait like 30 seg you will see the signals would restart and then do this
press menu and choose end
there it is now it recognize the sim...... so it possible is something with MODEM ASSERT (reset) but this is a solution not PERMANENT cuz when you reset o turn off the phone you have to do this again to get sim recognition again
so pliz devoleper make a PERMANENT solution with what i found
i try this with an att skyrocket with UCL2 baseband and UCL2 oem root ics
if you guys try this or think it its not possible just post me and on the weekend i ll upload a youtube video with all the steps and you ll see that it works
sorry for my english
Click to expand...
Click to collapse
Have you found a permanent solution for this problem? I been having the same issue with a SGH-M919 Tmobile version working on Movistar Colombia.
Thank you.
Very familiar issues buying from ebay garbage
4italia4 said:
hi i know there are a lot of threats already of this but now i bring a posible solution to this problem
in my case is no hardware problem cuz i change it, i have falshed a lot of modem and still says no sim... insert sim
btw the phone is unlock. so i decide to leave my skyrocket as nonfuntional phone but i start tu play with the service mode
and suddendly recognize the sim card and get data and works great. but it only works until you reset or power of the phone.
if that happend you have to do my steps again and that way you get sim recognition again.
i post this cuz im not a developer i dont know to much about debuging mode so plp that know that can see my steps a find a permanent solution
to the no sim error on skyrocket.
before start you have to inserte the FUNCTIONAL SIM CARD and power up the phone, it will power with no sim error
un dialer put *#197328640#
enter to debug screen 1
enter to phone control 8
enter to simulation 5
enter to modem Assert (reset)
at this point it appear to dont do anything but wait like 30 seg you will see the signals would restart and then do this
press menu and choose end
there it is now it recognize the sim...... so it possible is something with MODEM ASSERT (reset) but this is a solution not PERMANENT cuz when you reset o turn off the phone you have to do this again to get sim recognition again
so pliz devoleper make a PERMANENT solution with what i found
i try this with an att skyrocket with UCL2 baseband and UCL2 oem root ics
if you guys try this or think it its not possible just post me and on the weekend i ll upload a youtube video with all the steps and you ll see that it works
sorry for my english
Click to expand...
Click to collapse
Hi, im having the same problem but when i put the numbers *#197328640# it doesn't shoe me anything, empty list, no options!
please i really need any help in this :/
thanks
Not working with your method
4italia4 said:
hi i know there are a lot of threats already of this but now i bring a posible solution to this problem
in my case is no hardware problem cuz i change it, i have falshed a lot of modem and still says no sim... insert sim
btw the phone is unlock. so i decide to leave my skyrocket as nonfuntional phone but i start tu play with the service mode
and suddendly recognize the sim card and get data and works great. but it only works until you reset or power of the phone.
if that happend you have to do my steps again and that way you get sim recognition again.
i post this cuz im not a developer i dont know to much about debuging mode so plp that know that can see my steps a find a permanent solution
to the no sim error on skyrocket.
before start you have to inserte the FUNCTIONAL SIM CARD and power up the phone, it will power with no sim error
un dialer put *#197328640#
enter to debug screen 1
enter to phone control 8
enter to simulation 5
enter to modem Assert (reset)
at this point it appear to dont do anything but wait like 30 seg you will see the signals would restart and then do this
press menu and choose end
there it is now it recognize the sim...... so it possible is something with MODEM ASSERT (reset) but this is a solution not PERMANENT cuz when you reset o turn off the phone you have to do this again to get sim recognition again
so pliz devoleper make a PERMANENT solution with what i found
i try this with an att skyrocket with UCL2 baseband and UCL2 oem root ics
if you guys try this or think it its not possible just post me and on the weekend i ll upload a youtube video with all the steps and you ll see that it works
sorry for my english
Click to expand...
Click to collapse
I didn't find option in Simulation (I have inserted the Working Sim Card). Well I live in Mumbai,India. I can't come to US just to fix this phone. So please tell me what to do now? plz Plz tell me. am eagerly waiting for your reply.
I am finding permanent solution for this problem.
So you will need to solutions for this problem.
Please contact us on 9420076969.
Your phone is still properly working.
Hi,
This is my first post but, I'm an avid lurker. I am having some issues with my girlfriends 920i. It received an OTA update to marshmallow and ever since it won't read the Sim card. I've tried to flash the official fw through Odin and still having the same problem. Because it doesn't read my Sim card, I have zero access to any mobile network settings.
I am wondering if when they updated the marshmallow, I lost unlock capability.
Also, her imei and sn still match. Most of the problems I see people have are mismatched numbers, and her phone seems fine.
Any help would be greatly appreciated.
So, I checked the firmware that I flashed and it was INS which seems to be the locked version.
I flashed the INU firmware this morning but still not reading my SIM.
I'm out of options at this point, I'm going to go back to lollipop and see how that goes.
Hi,
I am having this issue for my SM G-920I since 2/3 Jan, 2017. I am using fine on US Tmobile network since Oct 2015, but all of a sudden got the no SIM, emergency calls only and continues to stay like this.. I am curious to know if you resolved the issue and how. Thanks for any feedback!
Help me please
I'm having the same issue. Just flashed INS 6.0.1 firmware on my brand new G920I and now i can't get any mobile signal or data. Tried to flash ZTO firmware for my country, but same issue. My phone was fine before flashing INS firmware. IMEI it's fine too. Recovery shows: Applied multi-csc. What can i do? ((((((((((
Kyoo x said:
I'm having the same issue. Just flashed INS 6.0.1 firmware on my brand new G920I and now i can't get any mobile signal or data. Tried to flash ZTO firmware for my country, but same issue. My phone was fine before flashing INS firmware. IMEI it's fine too. Recovery shows: Applied multi-csc. What can i do? ((((((((((
Click to expand...
Click to collapse
Do you also see: " No SIM, Emergency calls only" after rebooting the phone? What's the baseband version ?
upengan78 said:
Do you also see: " No SIM, Emergency calls only" after rebooting the phone? What's the baseband version ?
Click to expand...
Click to collapse
Thank you so much for helping me. Baseband version shows: G920IDVU3EPIF
I see only Emergency Calls Only message
Kyoo x said:
Thank you so much for helping me. Baseband version shows: G920IDVU3EPIF
I see only Emergency Calls Only message
Click to expand...
Click to collapse
Try to connect to Wi-Fi only and once connected, check if there are updates for Software/Firmware.
upengan78 said:
Try to connect to Wi-Fi only and once connected, check if there are updates for Software/Firmware.
Click to expand...
Click to collapse
Already updated and tried to downgrade to 5.1.1, but no sucess. I don't think it's a hw problem, cause it was working before the INS firmware flash, and IMEI number still shows right, no matter what rom i flash (now on MIUI). Can i clean EFS partition and try to flash ZTO firmware again, or i might lost my IMEI and get more problems? Also, wondering if advanced wipe with everything checked on TWRP can help. (data, internal storage, system, sbfs, cache, dalvik cache)
Can you open the phone dialer and enter this code *#*#4636#*#* then clikc Phone Information, and send a screenshot of what you see in the screen (Make sure no IMEI in the screenshot, before you post it here) ? Also check if Radio is OFF or ON.
upengan78 said:
Can you open the phone dialer and enter this code *#*#4636#*#* then clikc Phone Information, and send a screenshot of what you see in the screen (Make sure no IMEI in the screenshot, before you post it here) ? Also check if Radio is OFF or ON.
Click to expand...
Click to collapse
Codes on my dialer doesn't work, but i'm sure the IMEI is right cause it's showing in phone information. Also, radio is on cause when i search for mobile networks the carriers of my country appears on the screen but when i click on then, just appears a message saying that can't connect
Same problem, any solutions?
I had same issue for over a year, you can check details in my thread, resolved by factory warranty motherboard replacement (free of charge, even thou knox was tripped when I bought it, and I told lady in authorised repair shop that i don`t have warranty).
Forgot to mention that I also tried to repair it via Octoplus box, both by me and some other people (wanted a second opinion), DRK fixed, few new certs written, etc.), not only by flashing fw via Odin or Smart Switch.
And I was 99% sure it was hw, turns I was right.
P.S. country dependable: - in some countries they will probably want to sell you a new motherboard in Samsung (happened to me), but in other factory warranty will be accepted (probably, if the phone is not older than 3 yrs I guess)
After installing a custom ROM on my galaxy s6 it would no longer recognize my SIM card. I did wipe every option in TWRP recovery before flashing the ROM which might have something to do with the issue. The phone states "No SIM Card - No Service" in the top left of the lock screen, it also wont let me call any numbers to edit things in the phone. I have done some research and it sounds like I have wiped the sim and lost the IMEI/EFS data and therefore no longer have access to my sim. I was wondering if there was any possible fix or should I just send it off to Samsung to get repaired?
Did you back up the EFS partition, and put it somewhere safe? If not, you have a paperweight.
Repair won't be covered under warranty.
Sent from my SM-G920F using Tapatalk
Unfortunately I didn't back up the EFS partition. Situation is looking bad. :l
Try dialnig *#06# and see does it shows IMEI and sn, alo try *#0011# select stack 1 and check whether IMEI is OK, or NG.
Also what does it say in phone settings under baseband? Do you have mobile networks menu in settings?
You can try Smart Switch emergency initialization with sn of the phone if IMEI is ok (it will install latest stock fw for your phone) and see if that helps.
When I typed in "*#06#" The SN number was shown however the IMEI number was not. When I typed in "*#0011#" There was nothing but blank spaces separated by grey lines, I tried selecting row 1 however nothing happened. My base band version is "Unknown" listed under settings. I do however have the network settings listed in settings. In Smart Switch when I try to run the device initialization it states that my s6 "doesn't support initialising". I have flashed three different downloads of the stock rom to my phone using ODIN and have had no luck with any of them.
well Smart Switch always says that S6 is not supported, but initialization can be done anyway, just dont connect the phone until it asks you to do so, instructions below:
http://forum.xda-developers.com/galaxy-s6/help/how-to-smart-switch-emergency-t3383448
What is your model anyway, do you know which region fw was originaly on the phone, and which sv rev is shown in the download mode?
does in recovery mode says anything about DRK?
Unfortunately Smart Switch says that "'SM-G920F' does not support initialing. Please contact out service center." Even when I have entered the correct S/N and device model, as well as not plugging in the phone. My device model is the SM-G920F. I don't know the original region FW that was originally on the phone, however it was purchased in the UK and that is where I am have been ever since I bought the phone. The SWREV is: "B:3 K:2 S:2" in download mode. I currently have TWRP recovery installed so is there a place for me to search for the DRK in TWRP? Or should I re-flash the stock recovery using Odin?
that is weird, I reinitialized my g920f many times without any issue. DRK error is usually shown in stock recovery. does the phone boots up with stock fw, and are you using any custom kernel?
i got the same problem when I flashed xtrolite and alexis custom ROM on my S6, both ROM after flashing I got no service.
But I did a full stock backup in TWRP.
baseband unknown means that there is a problem with modem part of fw. and I dont know what fw you flashed. you said that you tried to flash stock, but it doesn`t work, but a little more details would maybe make a difference, like which fw, and what exactly is happening, what does about the phone menu says.
So far, since baseband is unknown I would try to flash modem fw with odin (for exact fw that is in the phone). before that usb settings should be set to CP, by dialing *#0808#
or if you decide tu run custom fw, you can always try asking in that rom thread, maybe someone already had issues like that with that rom and fixed them, or the developer of that rom can help fix it.
Boot your s6 to download and flash stock rom via odin from samsung it maybe work
Hello, I have a Samsung Galaxy S6(SM-G920F) and someone messed it up very badly. The Problems are:
1. X-axis touch is flipped(vertically flipped).
2. Dial pad codes like *#06#, *#2663# are NOT working.
3. No Registered network. Can not make or receive calls or use cellular data.
4. Phone frequently freezes the restarts automatically.
I tried to flash Stock Firmware but it says DRK error. I think it needs a boot repair. Not sure though. Now I'm in deep trouble. Can you guys help me out?
P.S.: It will be ok if I have to install a custom rom. Just I need this phone to work properly.
nawazdj said:
Hello, I have a Samsung Galaxy S6(SM-G920F) and someone messed it up very badly. The Problems are:
1. X-axis touch is flipped(vertically flipped).
2. Dial pad codes like *#06#, *#2663# are NOT working.
3. No Registered network. Can not make or receive calls or use cellular data.
4. Phone frequently freezes the restarts automatically.
I tried to flash Stock Firmware but it says DRK error. I think it needs a boot repair. Not sure though. Now I'm in deep trouble. Can you guys help me out?
P.S.: It will be ok if I have to install a custom rom. Just I need this phone to work properly.
Click to expand...
Click to collapse
Probably you might have damages the EFS data. Use SamsungSmartSwitch for device intilization and backup everything. It will wipe the entire storage.
maxaditya said:
Probably you might have damages the EFS data. Use SamsungSmartSwitch for device intilization and backup everything. It will wipe the entire storage.
Click to expand...
Click to collapse
Can you tell me step by step process?
I got samsung galaxy s6
The problem is that i dont understand witch rom i should flash
At the back of my phone and the odin mode says that my model is Sm g920p
But the settings and also other apps such as device info and smart switch says that my model is sm g920f
I thought the previous owner of my phone has flashed a custom rom that changed my model but the confusing part is When i boot into odin mode the Binary says SAMSUNG OFFICIAL.
Please help me
When you're booting into Download Mode, there is an option to show you a bar code, pressing the home buttom. If the meid match with the Dec numbers down behind your phone, it's an 920p.
I have a customized ROM that says OFFICIAL, and a kernel that does the same... don't pay much attention to that. If in Download Mode, it says that the model is G920P, that's the model - doesn't matter what it says anywhere else.
You shouldn't have an issue flashing a firmware. Just flash it, make sure autoreboot isn't on, and restart it into recovery mode, clear cache, system reboot and that should be all.
King-V said:
I have a customized ROM that says OFFICIAL, and a kernel that does the same... don't pay much attention to that. If in Download Mode, it says that the model is G920P, that's the model - doesn't matter what it says anywhere else.
You shouldn't have an issue flashing a firmware. Just flash it, make sure autoreboot isn't on, and restart it into recovery mode, clear cache, system reboot and that should be all.
Click to expand...
Click to collapse
Okey thank you sir.I have one more quistion.I live in asia so my phone is and should be unlocked.If i flash us sprint version on my phone, will it work just fine? Without any service problem
Tuvshuu31 said:
Okey thank you sir.I have one more quistion.I live in asia so my phone is and should be unlocked.If i flash us sprint version on my phone, will it work just fine? Without any service problem
Click to expand...
Click to collapse
Probably, yeah, but it's best to go for unlocked firmwares.
King-V said:
Probably, yeah, but it's best to go for unlocked firmwares.
Click to expand...
Click to collapse
I successfully flashed my phone to a us sprint version as i said.Unfortunately a problem has occurred.I lost my service.It says searching for service by the way My phone detects my sim card and the sim toolkit appeared.But at alst No service.
Can you help with that sir.If the problem occurred because of my new rom can you suggest me an another unlocked rom? please