::::::::ROBLEM::::::::::::
ok, just posting this in case anyone has a similar problem and does a search so that this will come up for them.
My phone died in the middle of booting up while it was doing a media scan.
Upon plugging the phone in and letting it charge for a while, I turned it on and the sd card wasn't recognized. I rebooted to recovery and it would also not mount there.
I tried formatting from recovery with extreme FAILURE LOL.
SD card reads fine from PC through a usb adapter.
Formatted SD card from pc and tried it in the phone again and still would not recognize it through several different recoveries or in android.
FIX::::::::::
So what I ended up having to do was connect the phone to the computer through the supplied USB cable.
Odin the charge.pit file make sure repartition is checked
Odin a full rom combo of any type, I used ep1q bloated.
Then booted into recovery and everything was successful in mounting the microsd card. Installed the rom of my choosing and it recognized it fine in android again as well.
Just figured some other person may have this problem again. I figured my microSD went tits up, but it was fine when used in the PC. Thanks for listening.
What my solution to this was
Shortly after putting my 16gb micro SD card from my Evo3d to EvoLTE, it wouldnt mount. stick it in, "mounting SD" and immediately "Removing SD" etc. Same thing with another android phone while their SD mounted fine.
Plug into windows and there is no SD to mount so i tried a microSD to SD converter card in windows and after very long delays i would see my file structure but nothing copied over.
Heirens Boot CD (i had 15.1) booted into the linux recovery/backup mode and was able to copy from SD to the HDD. Not sure if i'll try to wipe and re-use or just replace the 16GB card nor if it will mount at that point. Its still copying various folders but i got all my DCIM (4gb worth) back so i'm a happy camper either way.
Just thought i'd share how i got my data back at least
Related
Well, after getting a blue screen on my PC I then tried what most suggested: DELETE/UNINSTALL any LG driver and re-plug phone to install drivers again.
I went to uninstall programs and got rid of the LG driver there, then plugged my phone up and apparently installed two out of three files successfully. I rebooted my pc and now I plug my phone to it and two things:
1. My computer does not see the sdcard
2. My phone does not see my sd card
When I try to go with phone file manager to SD card it says.... SD card not mounted.
What to do now?
Is it mounted in the Settings > Sd card & Storage menu?
Nope...
I'm running cm7 and in the storage menu there are 3 breaks:
the first one for the SD card, second one for internal and third one to show you how much space is left in the SD card...
Well, in the 1st slot there is not card mounted but in the last one it does show how much space is left/used.... very weird if you ask me!
I will check if the sdcard is not bricked now with a sdcard reader...
well, I think the SDcard is bricked.... I put in the SD reader and connected to my pc and it is not being recognized!
UPDATE: Bought a new sdcard and I still can't mount my card to the pc? WTF!!
wIIse said:
UPDATE: Bought a new sdcard and I still can't mount my card to the pc? WTF!!
Click to expand...
Click to collapse
Have you reinstalled the LG drivers? Your PC cannot access even the SD card without those drivers.
This is why, once I upgraded past G1, I decided to not root anymore. 2.2 with a strong phone works great. I focus on being a "power user" and not a modder because, quite frankly, it takes way too much effort and the risk of messing up my phone is too great. I just don't understanding stepping out on that ice all the time, when the phone works so well without modding it beyond the user experience.
download from LG site
Hi,
Have you tried downloading and installing the latest drivers from LG website?
I couldn't connect to SD at first until I used the downloaded drivers.
No problems anymore here.
grtz,
Pfeffa-rah
UPDATE: I have went back to eagleblood's rom and now I am able to mount my internal and external sdcards to my pc *HAPPY*
I plan on going back to CM7 and hopefully I am able to mount the cards again without the BSOD!
UPDATE: as stated earlier... I went back to CM7 and now all my f'ng drivers are messed up again...not able to mount/unmount SDcard!!
CM7 should look into this.
After an ODIN to KC1 stock, the phone no longer recognizes the external SD card and says it is not mounted -- but when it gets to the home screen, I can see progress messages saying that the phone is actually reading the external SD card.
Also, the USB port doesn't work right. When I turn on USB debugging, messages alternatively flash in the top status bar that USB is connected and USB debugging is connected, even when the USB cable is not plugged in. When I plug the USB cable in, I do not get any dialog in notifications allowing me to turn the USB on. If I turn USB debugging off, I can see an external drive in Windows explorer but cannot access it.
Now, when I try to turn on USB debugging, the phone tells me to disconnect the USB cable -- but it's not connected.
The phone, if turned off, does not want to boot unless I plug the USB cable in. It is very difficult to get a connection to the phone so that ODIN will run. Sometimes I can get it into download mode but ODIN won't recognize the phone. Sometimes I can ODIN when the phone displays the cell + comp error message.
ODINing KD1 stock gives the same results. The phone was not like this when I first got it.
Where should I go from here?
wow. thats a lot of problems that i havent seen yet. i would say start back fresh. remove the sd card and format it with your computer. then put the update.zip from krylons cwm, ext4 converter, and icbinb (or w/e rom you are flashing) on it and leave it. odin to kc1 from raver. let the phone sit for 10 min or so and then push the recovery file from krylons final cwm to the right place. once you do that, shut the phone down completely. put the sd card back in. it should only have those 2 or 3 files on it. reboot recovery, wipe everything, check your mounts, flash the ext4 converter and then the rom. let the rom sit for 15 min after that initial google boot sequence. once that is done, reboot reboot recovery and fix permissions. and see if those problems persist.
Do I need a driver for Windows XP to be able to write to the sdcard once it is converted to ext4?
The sd card isn't bring converted to ext4. Format it with it's default settings. You can always create an ext4 partition, but right now we are doing something else
Sent from my SGH-T959V using XDA Premium App
do I odin KC1 with the sd card in the phone or should it not be on the phone? I had it in the phone when I odined KC1.
since you had it in before, try removing the sd card and the sim card and odin. i never had a problem with them in, but some people have experienced problems.
got CWM installed after reformatting sdcard from phone using settings.
After reformatting the 16 gig sd card, the phone would still not mount it. I thought there might be something wrong with the card, so I found an old 4 gig sd card from another phone and formatted that and the phone was able to mount that card. For some unknown reason, the card is named “Blackberry” even though I never had such a phone. I could not install CWM, so I reflashed KC1 with odin, this time with no sim card or sd card in the phone. The phone still would not connect to the USB ports on my laptop, but on my desktop at work, it will connect.
The phone recognizes the SD card and I was able to move recovery to system/bin, but when I try to install packages, I get the following error message:
E:Can’t mount /dev/block/mmcblk0p1
(no such file or directory)
E:Can’t mount SDCARD:update.zip
Installation aborted
I checked /dev/block and sure enough, there is no mmcblk0p1 file.
Looking up that error, I have found threads and fixes for other phones, and one suggestion to format the sd card from the phone. I did that under settings after copying the undotted files and directories to the computer, and copied those files and directories back to the sd card.
I then did a recovery reboot and reinstalled packages. Finally, CWM installs.
thats pretty random, but im glad its working! let me know how the rom flashing goes!
So then I installed ext4 and the icbinb rom via CWM, but the phone just hung at the bootscreen until I went back to CWM and installed the Bali 3.3 kernel, which I had stuck on the sdcard just in case. The phone then booted up and the usb port now seems to be working properly, at least when connected to the computer at work. The root problem was the sdcard, which needed to be formatted from the phone and not from the computer. I'll have to see if I can get the other sd card to work. I still can only see the external sd card from windows, but maybe that is just the way this phone works. This is a big relief. Thank you very much for your help.
Now, all I have to do is get my Vibrant working. I took it apart to replace a broken screen and there have been all kinds of problems since. But that's another project.
you will only see the external memory on the sgs4g. you will not see the internal memory, as it is reserved for the system rom and ram
Does the 4G not have an internal SD card like the Vibrant?
The phone still has a few problems. The biggest one is that it will not start unless it is plugged in to a charger or usb cable, even if the battery is fully charged. I think for some reason it is not reading the battery and doing what a phone with a discharged battery would do. I forgot to take a charger or usb cable with me today and I got no phone. I haven't tried recalibrating the battery yet, maybe that would fix the problem. But at least the phone is running like an xda-developers special with all the bells and whistles now. Thanks.
No, the vibrant has 16gb on board, the sgs4g doesn't. you can only access the sdcard from the computer.
If battery calibration doesn't fix that startup problem, it may be a hardware problem
Sent from my SGH-T959V using XDA Premium App
hello
i currently have a charge and have recently rooted it EE4. The root went fine and everything worked great for a few weeks. It was not until this week where i would go plug my phone into my computer which is running win7 64bit to mount the sd card and it would show up as a cd drive. I can view all of my files, I just cant write to the drive because of write protection.
For some reason I believe that it is a driver issue but I have tried reinstalling the drivers, which didnt work. Maybe i am not removing all of the drivers properly and reinstalling them correctly
I have tried connecting it to another computer, but it would also show up as a cd drive
I have tried reflashing the kernel and CWM
thanks
You didn't flash the SD card fix (http://forum.xda-developers.com/showthread.php?t=1118111)
Just download it, put it on your SD card, reboot into recovery and 'Install ZIP from SD card'
Let me know how it works out!
This drove me nuts earlier this week and I had the SD card fix sitting on my SD card not installed. I ran the fix and everything worked perfectly.
So I had this 8gb micro Sdcard that came with my phone and for Christmas I got a 16gb one. I had a lot of precious stuff on the older 8gb, so I put it into an adapter and connected it to my PC, planning to backup the contents and then put it on the 16gb. But when i connected it in, it said "This card needs to be formated before using". I first i thought the adapter was broken, so I put the micro sdcard back into my android phone so I could connect my phone to the computer and do it that way but when it turned on it said "Sdcard ready to remove". The phone wouldn't recognise it either!
I have already put other micro sdcards in the adapter and they work perfectly.
I have a lot of precious stuff on the micro sdcard so if there is a way to fix it without wiping everything, I'd be really happy to hear it.
Will give the person who answered best thanks in all of their last 15 posts.
Maybe try disk manager on your PC and see what format is says the card is..
otherwise try the phone again and again hopefully it will work. Ive had that before and a combination of playing with disk manager and the phone I managed to get the stuff off my card
Nooby Arc S User said:
So I had this 8gb micro Sdcard that came with my phone and for Christmas I got a 16gb one. I had a lot of precious stuff on the older 8gb, so I put it into an adapter and connected it to my PC, planning to backup the contents and then put it on the 16gb. But when i connected it in, it said "This card needs to be formated before using". I first i thought the adapter was broken, so I put the micro sdcard back into my android phone so I could connect my phone to the computer and do it that way but when it turned on it said "Sdcard ready to remove". The phone wouldn't recognise it either!
I have already put other micro sdcards in the adapter and they work perfectly.
I have a lot of precious stuff on the micro sdcard so if there is a way to fix it without wiping everything, I'd be really happy to hear it.
Will give the person who answered best thanks in all of their last 15 posts.
Click to expand...
Click to collapse
i would try inserting it into your phone several times to try to get it to catch..also reboot phone while card is inserted..if you have to format the card you can still get everything off of it by using a program like "recuva" .. ive used it many times and it works like a charm..nothing is ever erased on a sd card..its only overwritten..so as long as you havent overwritten anything on the card you can easily get it back..formatting will not overwrite anything
Connect your card to pc, open mini partition tool wizard. Click on your memory in program and next open.
I tried putting the sdcard back into my phone several times and always didn't work . I went onto diskmanager and see screenshot below for info (it's g/ drive). I then tried formatting with various settings and always got a failure see second screenshot.
http://s6.postimage.org/bn9mepk01/New_Bitmap_Image.png
http://s6.postimage.org/jvg5dg1a9/New_Bitmap_Image_2.png
Format exfat next fat32. BUT first try use http://download.cnet.com/MiniTool-Partition-Wizard-Home-Edition/3000-2094_4-10962200.html,Install and open with this program your sd. I had this same problem, i opened sd in partition manager and i didn`t have to format. Do you have ex or swap partition on this card?
sonymanw said:
Format exfat next fat32. BUT first try use http://download.cnet.com/MiniTool-Partition-Wizard-Home-Edition/3000-2094_4-10962200.html,Install and open with this program your sd. I had this same problem, i opened sd in partition manager and i didn`t have to format. Do you have ex or swap partition on this card?
Click to expand...
Click to collapse
very handy tool,thanks for posting that.
sonymanw said:
Format exfat next fat32. BUT first try use http://download.cnet.com/MiniTool-Partition-Wizard-Home-Edition/3000-2094_4-10962200.html,Install and open with this program your sd. I had this same problem, i opened sd in partition manager and i didn`t have to format. Do you have ex or swap partition on this card?
Click to expand...
Click to collapse
Hey. Thanks for the reply, I installed that program but it confuses me. How do i access my sdcard with it?
My sdcard is not partitioned or used for swap or anything.
Oh and I've tried formatting with exfat, fat, fat32 and NFTS and always fails
Do you see your sd card in this program? If yes try wipe volume
I checked your screens and your card is RAW- file system is broken or is unknown to the windows , try this:
1
close ALL your programs, insert your sd card to your computer and ONLY WAIT,(15 min.) do nothing, dont touch mouse (weird? yes but your computer will try to repair file system, fot 2gb is less 5-10 minutes, but your is 8 gb class???, that wait more)
2 (optional, but you should try 3 point)
Format your sd with windows installerr (format it during window installation using windows setup disc) you can cancell instalation after format without probles
3
If still nothing (after 25 minutes) try this program http://panasonic.jp/support/global/cs/sd/download/index.html - IT IS LAST OPTION WITHOUT SPEND MONEY
Tell me if it worked.
So, about the problem. All was fine untill a few hours ago. My note 10 notified me that my SD card is corrupted. OK, no biggie, lets just take it out and put it back in. Worked before, but not today.
Tried the same SD card in my laptop, worked without any problem. I'm feeling trolled. Next i tried with otg sd card adapter. It says "no supported partition was found".
Next, tried another SD card, still nothing. Tried that one with otg - bam, works. So, it's not card that's bad. Tried another one, was empty so i formatted it on phone. Nope - still corrupted. No matter how many times i formatted it, it's always corrupted.
But it works on laptop. All 3 of them work on laptop. Two of them i can see with otg, the one that was all the time in the phone says no supported partition.
Then i thought, maybe the sd reader in phone broke. Rebooted to recovery and guess what? First SD card that showed corrupted message works just fine in recovery. Now, one reset to factory setting would probably solve the problem but i have tons of apps that i'd need to backup and no space to do it because my sd card ain't showing in OS.
All i wanna know is am i doomed to reseting android or is there any trick i could use to avoid that?
Copy all things on your pc,format the SD Card in the Phone and copy all Things back to SD Card
nope, didn't work. had to reflash OS