Database Info

[Q] G2x stuck at LG logo/cannot access recovery

Hey all
Before anyone mentions that i should be searching around more, i would like to say that i've been on multiple threads and they all state the same thing (use NVflash to flash CWM and then boot into CWM but the solution did not work for me past flashing CWM and then trying to access recovery after) and i wasn't able to find one that had a similar problem as mine.
I have CWM flashed through NVflash and was running CM7.1 RC1. I took a screenshot with the 'shootme' app and proceeded to look at the gallery to make sure it came out okay. The gallery crashed and i was sent to the home screen. I swiped to a different homescreen when my phone froze halfway through the transition to the next screen. No combination of buttons/long presses were able to get me out of it so i went ahead and did a battery pull. So my dilemma is that now i'm stuck at the LG boot logo with no blue status bar under it. It freezes there and will not do anything every time i boot up. volume down+power does not give me access to recovery nor does any other button combo get me past the LG boot logo.
Are there any other methods i might be able to use like ADB or what not to get myself out of this situation? or at least into recovery? Any comments or suggestions would be greatly appreciated as i've been searching for hours with little help and my eyes are starting to get strained.

hmmm.. I know it's a simple question, but I gotta ask.. are you holding the pwr and volume down button long enough? you have to keep holding it even after you see the LG screen.. Keep holding until you see the 2nd screen?
If so.. do the nvflash again? Edit: Not sure if I would do this without getting further guidance tho..

schmit said:
hmmm.. I know it's a simple question, but I gotta ask.. are you holding the pwr and volume down button long enough? you have to keep holding it even after you see the LG screen.. Keep holding until you see the 2nd screen?
Click to expand...
Click to collapse
This. I remember when I boot looped my phone I had the problem of letting go of the volume key too early, you need to hold down volume and power from a totally powered off phone until recovery actually starts and you see the green "android" logo of CWM.
Try re-flashing CWM, NVFlash CAN fail. There is literally nothing you can do within the OS that will prevent recovery from working. Either you did something wrong somewhere along the recovery process or you discovered an entirely new problem with the phone. I'm going to hazard a guess and say it's the former.

Thanks for the response guys. I wish that it was the case of not holding the buttons long enough. I have tried numerous times with the buttons held down for a long period of time. I even held the combo down for almost 5 minutes a few times.
Every time i try to boot up, it won't go past the LG boot screen so i would pull the battery out and go through flashing CWM through NVflash again. I'm sure I'm not missing anything because everything goes through and gets sent to the phone successfully.
I did happen to run into a thread that was closely similar to mine but his method was to just keep reflashing CWM and the stock recovery back and forth every time it failed until it turned on. I might have to try that if i cannot figure out this problem out soon. Not being able to use this phone is killing me! heh.

I just joined your club. Wow this sucks.

So apparently this is a whole new problem that's been found? Every other help thread seems to point to using NVflash or remaking the partitions due to a bad flash using an O2x based file instead of G2x.
But none of those solutions come close to doing anything. There has been some people with the same problem as me but aren't proactive at all enough to get someone's attention, so i'm guessing this problem is getting pushed to the side with people just going about getting their phones replaces/buying new ones.
I did happen to run into a thread on paulobrien/modaco's forum that had people using NVflash to get out of any sticky situation like this. It just reverts everything back to the stock factory settings but with root. We cannot use this though because he hasn't built it to be compatible with our LGP999's because everything was built for their UK LGP990's. Maybe that's a start to getting this solution fixed?

I hate to say this, bit you might have to call t mobile and get a replacement. Flash back to stock recovery and they won't know you messed with anything.
Sent from my Nexus 5g using XDA Ultimate App

Don't send back....you'll get same defacement a battery pull go into nvflah and go back stock then flash nv flash fix pArtitions

As I have mentioned before, NVflash does NOT give me access to my recovery let alone solve anything else. NVflash DOES work and does sucessfully send both CWM and the stock recovery but when I try to boot into either of them, let alone just power on normally, it simply DOES NOT go past the LG boot screen. it just hangs there doing nothing at all until I pull the battery out and do the same process over until it just hangs again.
while it is on/stuck at the LG screen, my computer does not recognize it so i cannot even try and run ADB commands. It does however, recognize it when I plug it in using the volume buttons held down when I use NVflash but there's nothing else I can do besides use NVflash obviously.

Jduhb said:
As I have mentioned before, NVflash does NOT give me access to my recovery let alone solve anything else. NVflash DOES work and does sucessfully send both CWM and the stock recovery but when I try to boot into either of them, let alone just power on normally, it simply DOES NOT go past the LG boot screen. it just hangs there doing nothing at all until I pull the battery out and do the same process over until it just hangs again.
while it is on/stuck at the LG screen, my computer does not recognize it so i cannot even try and run ADB commands. It does however, recognize it when I plug it in using the volume buttons held down when I use NVflash but there's nothing else I can do besides use NVflash obviously.
Click to expand...
Click to collapse
Did you ever find a solution to this issue? Because my phone is doing this...
I attempted to restore my phone back to the wrong backup that was from a galaxy sII (2.3.4 i think); needless to say, the restore failed. I then restarted my phone from CWM and it gets stuck at LG screen.
I have tried to NVflash back to stock; nothing. same thing reflashing back to CWM.
ideas?

have you tried this link out yet?
http://forum.xda-developers.com/showthread.php?t=1180331

same problem..... anybody find something to fix this yet?

From what I heard is that you need to remove the battery, then boot into recovery or something.
Sent from my G2X

Use smartflash for the p990 but only use the p999 ap.bin file which will put the rom and kernel back to stock p999.

Rom for recovery always fixes any soft brick back to stock 2.3.3 OTA. It's saved my phone multiple times from stuck on S/W screen to being stuck on lg logo or even the dreaded can't mount sdcard-cache errors in cwm.
Sent from my LG-P999 using xda premium

I used the following method when Clockworkmod became corrupted and was unable to mount my sd card. I had just wiped everything on my phone intending to install a new rom when the issue happened. I could not even get to the S/W upgrade screen. It saved my phone. Hope it works for you.
http://forum.xda-developers.com/showthread.php?p=17258229

jcbofkc said:
I used the following method when Clockworkmod became corrupted and was unable to mount my sd card. I had just wiped everything on my phone intending to install a new rom when the issue happened. I could not even get to the S/W upgrade screen. It saved my phone. Hope it works for you.
http://forum.xda-developers.com/showthread.php?p=17258229
Click to expand...
Click to collapse
omg thank you so much! It worked! Not only that but i was stuck on frodo 2.2.2 before which is why i was messing with my phone in the first place and now its on gingerbread. Awesome! thank you!!!!

sabotage99 said:
omg thank you so much! It worked! Not only that but i was stuck on frodo 2.2.2 before which is why i was messing with my phone in the first place and now its on gingerbread. Awesome! thank you!!!!
Click to expand...
Click to collapse
Glad for you that it worked.
Kwes1020 pointed me in the right direction last week. Be sure to give a thanks to ILUHA_89 who came up with the fix.

Amazing how people are soo lost without providing them link after link to other threads. They are soo lazy and can't follow simple directions, each time i get a new phone i go to that section on xda and soak up all the information as it usually is already there. It's just funny is all i guess.

d12unk13astard said:
Amazing how people are soo lost without providing them link after link to other threads. They are soo lazy and can't follow simple directions, each time i get a new phone i go to that section on xda and soak up all the information as it usually is already there. It's just funny is all i guess.
Click to expand...
Click to collapse
It's really not that big a deal. I was brand new to android once and asked all sorts of things.
I, like you, happen to read everything I can get my hands on. Some struggle going through all the info. I was here the day the forum opened, so I kind of remember where everything is.
Some are lazy and others just have no idea what the heck is going on and are intimidated by certain processes. I would rather help someone instead of listening to them ***** about their broken phone.

[Q] CM7 Not Going Beyond Loading Screen AND Clockworkmod Is Black

A couple of weeks ago I decided to root my phone for the benefits it came with. I did so successfully and had no problems until I decided I'd let my curiosity get the better of me and try flashing CM7 onto my phone. I did so, and everything seemed successful, but I got stuck in a boot loop when I turned on the phone.
I know there are solutions to this, but they all involve either CWM or ADB. Just two problems: I can't use ADB because I forgot to leave USB Debugging on, and I can't seem to get CWM to do anything (it's just a black screen).
There are solutions to all of these problems individually, I know, but each solution relies on at least one of the others to be working. I've been surfing this forum and others like it hoping that someone else would have this problem and would have a solution for me, but I've come up dry.
I used attn1's Ace Hack to root my phone, and then I used Rom Manager to install CM7. Then I hit the loop. Also, my CWM was working prior to CM7.
Does anyone know what I should do?
Thank you in advance,
JW
Inspire 4g
P.S. - I'm new to this forum and don't really know the rules perfectly, so if I did something wrong, then please just let me know what I did and what I should've done. Thank you.

But you can still get in hboot right?

It sounds like you did not choose to wipe data and cache. You always need to do this when changing roms. Best way is to enter cwm yourself and select wipe data/factory reset and wipe dalvik then flash Rom.

Pull you battery for a little bit then try and get into recovery again. If you still can't get in then you will have to reflash your recovery through bootloader.

If all else fails you can use the tool in this link to return to stock. Then re root you phone. genes tool

You can jump into the IRC channel and get some real-time help too:
http://webchat.freenode.net/?channels=#liberatedAria

Gizmoe said:
It sounds like you did not choose to wipe data and cache. You always need to do this when changing roms. Best way is to enter cwm yourself and select wipe data/factory reset and wipe dalvik then flash Rom.
Click to expand...
Click to collapse
No, I didn't think to. To be honest, I saw Rom Manager and thought I would just be able to click on what I wanted and have it ready to play with in a few minutes. I never read what to do before the installation, which was my huge mistake.
Anyhow, I don't think I can get into HBoot. When I turn the phone on with power button and volume button, it vibrates three times, but then it goes to a black screen. I read about this problem with CWM, but the only solutions I saw involved getting into your phone - which I can't do.
So I'm wondering if CWM still works but that it just doesn't show what it's doing. If that's the case, then maybe I could still manage to fix my phone with CWM. Does anyone know if such is the case?

Thank you!
Gizmoe said:
If all else fails you can use the tool in this link to return to stock. Then re root you phone. genes tool
Click to expand...
Click to collapse
Gene Poole said:
You can jump into the IRC channel and get some real-time help too:
http://webchat.freenode.net/?channels=#liberatedAria
Click to expand...
Click to collapse
Thank you both so much for your help! I'm sorry I'm such an ignoramus. Thank you guys!!

JesseWright said:
No, I didn't think to. To be honest, I saw Rom Manager and thought I would just be able to click on what I wanted and have it ready to play with in a few minutes. I never read what to do before the installation, which was my huge mistake.
Anyhow, I don't think I can get into HBoot. When I turn the phone on with power button and volume button, it vibrates three times, but then it goes to a black screen. I read about this problem with CWM, but the only solutions I saw involved getting into your phone - which I can't do.
So I'm wondering if CWM still works but that it just doesn't show what it's doing. If that's the case, then maybe I could still manage to fix my phone with CWM. Does anyone know if such is the case?
Click to expand...
Click to collapse
Sounds like you're holding the vol+ button. You need to be holding vol- when you press power to get to HBOOT. From there you can get into Recovery.

sharksfan7 said:
Sounds like you're holding the vol+ button. You need to be holding vol- when you press power to get to HBOOT. From there you can get into Recovery.
Click to expand...
Click to collapse
this is correct, but you may want to pull out your sd card first. if it still has the pd98img on there,,, its just gonna loop ya. so pull it out before trying, you can always stick it back in once you get to recovery, then select mount> sd card
GOOD LUCK!!

please help, my phone wont get past motorola screen

after trying to flash a rom using cwm recovery, my phone wont even get past this screen, pleaseeeeeeeee helpppppp!!!!!!!![/COLOR]

justinsims241 said:
after trying to flash a rom using cwm recovery, my phone wont even get past this screen, pleaseeeeeeeee helpppppp!!!!!!!![/COLOR]
Click to expand...
Click to collapse
Pull the battery and go HERE.
Make sure you do the "Replace" step mentioned at the bottom of the "HOW TO FLASH A FXZ" section if you were on a 2.3.6 based ROM.
Also, did you have enough battery left (say, around 60-70% to be safe) when this happened? If not, plug it in the wall charger for a while first.
Good luck!

What ROM did you flash? You might need to wipe data/factory reset. Boot up by holding the volume buttons and the power button, then use the volume up button to boot into recovery. Once you see the exclamation mark, press both volume buttons. Then use volume down to scroll to "factory reset" and use the power button to select it.

5:53 guy: i tried to flash the ICS CM9 that they had in the development forum
5:47 guy: i went to the post and went to the fastboot section, but the links provided were either broken or didnt contain the FXZ file. If this help any this is what happened. i backed up my stock rom using the cwm recovery and then when that was succesful, i downloaded the cm9 (but i it was for the droid 3 not the atrix 2 because thats what they said to download in the forum).i wiped all the data cahce and dalvik info. (data x3 , cache and dalvik x1) then i went into "install from zip" and i choose the file they gave me. it finished, i selected reboot the phone, and now im here in a soft boot. CURSE YOU CM9 FOR DROID 3 #lol.

thanks though.

ZOMG! i finally got it using THIS ONE CLICK METHOD! I wish i could remember what forum i got this outta of cause i would give that user a million thanks.

justinsims241 said:
ZOMG! i finally got it using THIS ONE CLICK METHOD! I wish i could remember what forum i got this outta of cause i would give that user a million thanks.
Click to expand...
Click to collapse
Good to hear..
Sent from my mind using XDA

[Q] Newly rooted phone stuck at T mobile Screen.

I completely followed all instructions on how to root the 4g blaze, after Odin, does a reboot the phone stays at the boot up screen? Any ideas, did I over look something?
R/S
Patrick

huwilerp said:
I completely followed all instructions on how to root the 4g blaze, after Odin, does a reboot the phone stays at the boot up screen? Any ideas, did I over look something?
R/S
Patrick
Click to expand...
Click to collapse
ALL questions in General Section.
To answer you.. try wiping data & cache in CWM.
If you don't have CWM, then you did do something wrong cause you needed to have that prior to rooting.
Sent from my Unicorns' Dust.

huwilerp said:
I completely followed all instructions on how to root the 4g blaze, after Odin, does a reboot the phone stays at the boot up screen? Any ideas, did I over look something?
R/S
Patrick
Click to expand...
Click to collapse
Did you install k0nane's root kernel over ICS? If so that's where you went wrong. There's a few threads here where others have done so and have been helped. Check those threads.
Sent from my SAMSUNG-SGH-T769 using xda app-developers app

This is why I "thought" you needed 10 posts or thanks to even post in Dev.
Sigh..Oh well. Guess the search button is too hard to use.

chjema said:
This is why I "thought" you needed 10 posts or thanks to even post in Dev.
Sigh..Oh well. Guess the search button is too hard to use.
Click to expand...
Click to collapse
I have a question.... I used odin3 v 1.85 to root my gs blaze... after i went into a boot loop. after researching i found a thread on site that said to flash siyah??? well i did that and my phone went died..... wont turn on, tried every three button combo i can find, took battery out put it back in, held the volume buttons while putting the battery in and hooking it up to computer... nothing. so im gonna make an assumption that i hard bricked my phone... my question is: will a jig help me get to the download screen or recovery mode?
also i posted this here because it was the best match for my problem

laknbawill said:
I have a question.... I used odin3 v 1.85 to root my gs blaze... after i went into a boot loop. after researching i found a thread on site that said to flash siyah??? well i did that and my phone went died..... wont turn on, tried every three button combo i can find, took battery out put it back in, held the volume buttons while putting the battery in and hooking it up to computer... nothing. so im gonna make an assumption that i hard bricked my phone... my question is: will a jig help me get to the download screen or recovery mode?
also i posted this here because it was the best match for my problem
Click to expand...
Click to collapse
JIG will not help hard brick. PM me and I can offer some help

[Q] Stuck in bootloop on LiquidSmooth

A few details before I start
I am on Galaxy S3 i535 from Verizon, was running CleanROM 5.6 for a few hours after coming from Codename Android that I was using for a few days(I've been going crazy with trying roms lately.)
I flashed LiquidSmooth 2.0 with CWM (never have used odin)
On all of these flashes before i did so I wiped system/factory reset, wiped cache and dalvik cache, and formatted system, cache, and data.
I had just finished flashing Liquid Smooth about an hour ago and was installing a few things with titanium back up. everything up until this point was going fine, got all my apps instaIlled and ready to go, and I head into the settings and try to turn on a few things and edit some settings in the Liquidsmooth settings.
Now my phone is stuck in a bootloop and I'm not sure what to do. I have tried power/volume down, power/home/volume up, power/home/volume down, and nothing will get it to reboot. I dont know whether or not it is safe to take out the battery and start from there, so if that is the route I should take, please let me know.
I have no experience with odin, but I can most definitely look that up so I wont need help there. Just some help on whether or not I should take out the battery or do something else. I just don't want to brick it in any way if that is avoidable:fingers-crossed :fingers-crossed:
Thanks to whoever can help me!
Edit:
I used the search a little better this time and saw people say pull battery on similar cases, and I did that, and I'm still stuck in bootloop. (It seems like in most of the threads I found pulling the battery was a given so people didnt mention it, but I needed to know for sure.) So I am still in the bootloop and am just going to boot into download mode and go from there.
Alright I was able to odin to stock, and now im back to square one.
Not sure how to delete threads :S

Toastiesyay said:
A few details before I start
I am on Galaxy S3 i535 from Verizon, was running CleanROM 5.6 for a few hours after coming from Codename Android that I was using for a few days(I've been going crazy with trying roms lately.)
I flashed LiquidSmooth 2.0 with CWM (never have used odin)
On all of these flashes before i did so I wiped system/factory reset, wiped cache and dalvik cache, and formatted system, cache, and data.
I had just finished flashing Liquid Smooth about an hour ago and was installing a few things with titanium back up. everything up until this point was going fine, got all my apps instaIlled and ready to go, and I head into the settings and try to turn on a few things and edit some settings in the Liquidsmooth settings.
Now my phone is stuck in a bootloop and I'm not sure what to do. I have tried power/volume down, power/home/volume up, power/home/volume down, and nothing will get it to reboot. I dont know whether or not it is safe to take out the battery and start from there, so if that is the route I should take, please let me know.
I have no experience with odin, but I can most definitely look that up so I wont need help there. Just some help on whether or not I should take out the battery or do something else. I just don't want to brick it in any way if that is avoidable:fingers-crossed :fingers-crossed:
Thanks to whoever can help me!
Edit:
I used the search a little better this time and saw people say pull battery on similar cases, and I did that, and I'm still stuck in bootloop. (It seems like in most of the threads I found pulling the battery was a given so people didnt mention it, but I needed to know for sure.) So I am still in the bootloop and am just going to boot into download mode and go from there.
Alright I was able to odin to stock, and now im back to square one.
Not sure how to delete threads :S
Click to expand...
Click to collapse
ok i only read the first few lines but manually boot into cwm by either vol up or down and multi function and power at the same time and upload a rom like synergy i know it works and u should be good

WOW!
This I cant believe!
Toastiesyay said:
I have tried power/volume down, power/home/volume up, power/home/volume down, and nothing will get it to reboot.
Click to expand...
Click to collapse
wingtytn said:
ok i only read the first few lines but manually boot into cwm by either vol up or down and multi function and power at the same time and upload a rom like synergy i know it works and u should be good
Click to expand...
Click to collapse
Yeah, we noticed you only read the first few lines. :what:
If you are gonna try to help at least read the whole OP.
And to manually boot recovery its: Volume up+home+power.
Not
wingtytn said:
EITHER vol up or down and multi function and power at the same time
Click to expand...
Click to collapse
Sent from my SPH-L710 using xda premium

OP you are missing the point here. You have to take the battery out and put it back in before going to recovery. Once you have done that try vol-up/home/ power at the same time. Once samsung logog appears look at the top left if you see words release. it will boot to recovery. You can take it from there.