[Q] sprint galaxy tab sph p100 brick, HELP PLEASE!! - General Questions and Answers

ok i have seen the noob video and i honestly feel i have exhausted every option both here and on the web by just searching google with the errors i have seen. so i think this permits me to start a thread to get help for my specific problem.
was tryna update to gingerbread and it crashed.
1. tried going back to froyo, sw upgrade gave me a binary error. then i tried to flash the tar from the sw upgrade folder with odin and it fails everytime apparently when it tries to flash a recovery file.
2. tried flashing a rooted gingerbread and it passed but screen goes blank after first screen on startup
3. tried something from samfirmware and it failed and made the screen blank so i cudnt see anything.
4. came back here with help of someone. found gingerbread with signed bootloaders and it fixed the blank screen thing. but when i try to flash the tar with or without bootloaders. it fails at hidden.rfs.
5. tried takin the hidden file out. and it passed and i flashed dbdata but recovery mode gives me a tonne of red lines about errors in wiping factory data and tha cache. so still no boot. im out of option.
sorry for the long post but thought id list out what i did so far. need your helps guys. please.

no one can help me?

Related

[Q] PLEASE HELP, Stuck in bootloop and no way out!

I have a p5113 and it is running 4.2.2 it is a friends. It turns on all the way to the homescreen for about 30 seconds. Then it reboots. I have gotten into recovery and it lets me wipe data factory reset. Then when I go to reboot it shows an error below the android and there has been no data wipe when it reboots. and reboots and reboots.........It also says NO COMMAND when booting recovery below the android. OH, I also tried flashing another stock recovery. Did not fix issue with recovery.
I have gotten into download mode and tried to cf root. Doesnt work, no recovery. Still same as above just goes to stock with no command written at bottom then error when you go to reboot it. Tried both versions of CWM and TWRP Odin files. DONT WORK. Tried to flash recovery by zip and get signature verification failure.
I figured oh, I will do what I always do to tablets try and reinstall the firmware. Which is the 4.2.2 firmware I go ahead and odin it, everything looks fine, it did take way too long like an hour and half. Passes, reboots, same operating system same data didnt change a thing! Still rebooting still recovery errors. Tried to downgrade to ICS and it passed after an hour and a half of slow odining NOTHING again same story as JB didnt change anything.
I have noticed that there is an avg in apps. I never get enough time to uninstall it. It always reboots before I can get to it. ANY HELP IS APPRECIATED.
jhr5474 said:
I have a p5113 and it is running 4.2.2 it is a friends. It turns on all the way to the homescreen for about 30 seconds. Then it reboots. I have gotten into recovery and it lets me wipe data factory reset. Then when I go to reboot it shows an error below the android and there has been no data wipe when it reboots. and reboots and reboots.........It also says NO COMMAND when booting recovery below the android. OH, I also tried flashing another stock recovery. Did not fix issue with recovery.
I have gotten into download mode and tried to cf root. Doesnt work, no recovery. Still same as above just goes to stock with no command written at bottom then error when you go to reboot it. Tried both versions of CWM and TWRP Odin files. DONT WORK. Tried to flash recovery by zip and get signature verification failure.
I figured oh, I will do what I always do to tablets try and reinstall the firmware. Which is the 4.2.2 firmware I go ahead and odin it, everything looks fine, it did take way too long like an hour and half. Passes, reboots, same operating system same data didnt change a thing! Still rebooting still recovery errors. Tried to downgrade to ICS and it passed after an hour and a half of slow odining NOTHING again same story as JB didnt change anything.
I have noticed that there is an avg in apps. I never get enough time to uninstall it. It always reboots before I can get to it. ANY HELP IS APPRECIATED.
Click to expand...
Click to collapse
so you wanna say that your tab is in bootloop
if that then please revert to stock rom
also if you are not able to do this then i have to say that your tab is bricked
try triangle away or take it to customer care
yep its
aditya rathee said:
so you wanna say that your tab is in bootloop
if that then please revert to stock rom
also if you are not able to do this then i have to say that your tab is bricked
try triangle away or take it to customer care
Click to expand...
Click to collapse
not a brick and I am on stock if you would have read the OP you would know that. I have had a brick before the definition of a brick is a device that does not turn on. I have flashed many tabs with stock and customs. Thanks for the great advice but I am a member of XDA and I like to do things myself or with the help of others in my community. I REFUSE TO TAKE ANY ANDROID DEVICE TO CUSTOMER CARE THAT STILL TURNS ON>
jhr5474 said:
not a brick and I am on stock if you would have read the OP you would know that. I have had a brick before the definition of a brick is a device that does not turn on. I have flashed many tabs with stock and customs. Thanks for the great advice but I am a member of XDA and I like to do things myself or with the help of others in my community. I REFUSE TO TAKE ANY ANDROID DEVICE TO CUSTOMER CARE THAT STILL TURNS ON>
Click to expand...
Click to collapse
i like your confidence brother but i was just helping you
also with your threads title in thought you were still having bootloop
also boot loop mainly happens when system files interfere with each other and result in instability during boot and crashes also it is not always necessary that in boot loop device would not turn on as you said earlier
i have seen boot loop on my tab even during charging animation as it was off it was due to use of flashing scripts that conflicted with each other

[Q] I've tried everything and looked everywhere

Hey everyone, I'm using a GT-P5100 (3G + Wifi) O2 UK rooted tablet and for the last month it has been broken. It started rebooting itself randomly every now and then, and then suddenly it wouldn't even boot up for 15 seconds before it would restart itself again.
I am able to get into safe mode and I can get into the boot options, but when I factory reset it does nothing, I've tried from the boot menu, from safe-mode options and even from the dial up code.
I tried to connect my tablet to my PC as a media device and format it but that didn't work either; I can't connect it as a disk then format it that way because they took out 'mass storage mode' on this firmware.
I then tried to flash a stock ROM in Odin but every time I tried it would fail until I used Odin.v1.3, but guess what, it rebooted itself and my entire tablet is still exactly the same.
(the option was on AP ram in v1.3 not AP nand I don't know if that makes a difference.)
If anyone can point me in the right direction I would appreciate it so much. I have been trying for weeks to fix this and I just don't know what to do anymore, I tried on another forum but nobody answered me.
Everyone else gets replies and I get zilch; amazing. I don't know what it is that is preventing my tablet from wiping itself but it refuses to clear the current data no matter what way I try (ROM, factory reset, computer format). If someone could just tell me what that is and what I have to do about it that would be grand.
You mention "rooted " but you don't mention what current rom or past roms that you may have flashed, you could have some sort of rom cluster [email protected]$k going on in your tab but NO one else will ever be able to help because of lack of INFO or history.
Pp.
I standard rooted it from Odin. This is my first ROM I am trying to flash. I just need to know what would prevent a tablet from rebooting itself properly. Factory reset, format and flash is not working so I must assume that rebooting is the issue here.
If you are running stock rooted rom and having issues like this the only way out is reflashing the stock firmware complete (not just a rom) and see if that fixes it before you try any other roms.
If you can get into download mode thats the fix.
Pp.
To flash it completely do I need more than an MD5 file? (I also have the partition file for my model). Another question, if the tablet is having issues with the reboot after a flash, will updating from a microSD with a zip help? Thanks for the advice.

[Resolved] [SM-T210] Wiped everything don't know what to do

Hello, i've bought this Samsung SM-T210 like 3 years ago, i rooted it as soon as i got it and after a year or so i decided to go back to factory settings cos of too many trash files anyway as far as i can remember i've select the wipe data or somethin and it got stuck on "Boot Loop" thingy only samsung logo comes up over and over again till i turn it off so i have tried every single solution that i can find on google and forums best i could do was getting it out of boot loop, now it just directly boots into TWRP and i can not do anything over there can't install any roms nothing whenever i try to install somethin it just gives me bunch of errors with cant find cache, data etc . i saw people had same problem and they got solutions by installing a new os, rom whatever it's called, i know how to follow the instructions but those solutions about my problem didn't help at all, now after a year i've decided to fix it again do u guys have any other solutions about this ? i'm waiting for it the charge up gonna list the errors i get on each section of twrp. :crying: :crying: :crying:
When i press (power+home) i'm only getting a text on bottom left corner says POWER UPLOAD REASON: POWER KEY H/W REVISION : 0.3
(vlm down+power+home) only gets me to the black screen nothing comes up
(vlm up+power+home) TWRP interface
power key by itself does nothing anymore.
----
******i had access to download mode via adb by using "adb reboot download"
i tried to install my firmware using odin and surprisingly it started to work again and im sure i've tried this billions of time.***********
semavi said:
Hello, i've bought this Samsung SM-T210 like 3 years ago, i rooted it as soon as i got it and after a year or so i decided to go back to factory settings cos of too many trash files anyway as far as i can remember i've select the wipe data or somethin and it got stuck on "Boot Loop" thingy only samsung logo comes up over and over again till i turn it off so i have tried every single solution that i can find on google and forums best i could do was getting it out of boot loop, now it just directly boots into TWRP and i can not do anything over there can't install any roms nothing whenever i try to install somethin it just gives me bunch of errors with cant find cache, data etc . i saw people had same problem and they got solutions by installing a new os, rom whatever it's called, i know how to follow the instructions but those solutions about my problem didn't help at all, now after a year i've decided to fix it again do u guys have any other solutions about this ? i'm waiting for it the charge up gonna list the errors i get on each section of twrp. :crying: :crying: :crying:
When i press (power+home) i'm only getting a text on bottom left corner says POWER UPLOAD REASON: POWER KEY H/W REVISION : 0.3
(vlm down+power+home) only gets me to the black screen nothing comes up
(vlm up+power+home) TWRP interface
power key by itself does nothing anymore.
----
i had access to download mode via adb by using "adb reboot download"
i tried to install my firmware using odin and surprisingly it started to work again and im sure i've tried this billions of time.
Click to expand...
Click to collapse
I don't understand.
You're saying that you successfully flashed it with your firmware and it started working. Does this mean you don't have an issue now? Or is there still a problem?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
yea i couldnt even open up the download mode it was saying RUN RDX TOOL but i just ignored whatever it says and tried to install it with odin till it succeeds after a few tries it just completed the installation and simply started to running.

Samsung Note Edge sprint boot loop

I have almost all the threads open on this forum with getting resolving the issue.
I woke up last week only to find the phone continually rebooting.
I ordered a new battery - same issue
did factory reset - same issue
did wiped cache - same issue
downloaded sprint firmware and installed via Odin - same issue.
I bought this phone less than a month, although used. Its extremely frustrating.
Any help will be appreciated.
Hi, did u do something?
I also have this note when I do restore by Odin I see only logo Samsung (on top info "recovery boot" when I go to recovery info "no command" and boot loop.
I had the same problem with SM-N915P model, and here are a few steps that I did to pass the bootloop.
- Download this PIT file : https://mega.nz/#!RZEzQSwR
- Open software you prefer to flash ROMs (ODIN, Z3X)
- Select the pit file.
- Check Re-Partition option, Auto-reboot, F. Reset Time.
- Add stock ROM files (Try to install the last ROM that it worked for you. ).
- Flash it.
Best regards.
Do you have the decryption key? Has anyone else tried this option?
Same issue with the latest stock firmware from sammobile, I put it down, came back five minutes later, locked on Sprint's LTE screen. I tried to restore from my TWRP backup, factory reset, reflash the firmware in Odin (that fails for some reason). I managed to get it to "Welcome to your new device, preparing your phone, this may take 3 or 4 minutes" or whatever it says, then >poof!< it reboots.
Does anyone have any ideas for this? I'm stumped. It does have TWRP recovery on it, so there's that.
rush242 said:
Do you have the decryption key? Has anyone else tried this option?
Same issue with the latest stock firmware from sammobile, I put it down, came back five minutes later, locked on Sprint's LTE screen. I tried to restore from my TWRP backup, factory reset, reflash the firmware in Odin (that fails for some reason). I managed to get it to "Welcome to your new device, preparing your phone, this may take 3 or 4 minutes" or whatever it says, then >poof!< it reboots.
Does anyone have any ideas for this? I'm stumped. It does have TWRP recovery on it, so there's that.
Click to expand...
Click to collapse
Try again please.
https://mega.nz/#!lAMEXaCA
Decryption key: !I_kcR8cv4aXpdGQ0uQf8nnMUliDdVgI8bjzX2V4g9TQ
This process has been tested.
See the image.
After all those steps, I've unlock it with idoneapps.com instructions..
Best regards. View attachment 4521231
Sent from my LG-LS993 using Tapatalk
Thank you, very much!
Let's see what happens....
Has anyone got any ideas here, my S10+ was stolen last night, so I'm frantically trying to get this edge back in working order.
I've gotten it to the stage with the gears on the screen and "Android is upgrading apps" or something similar, with x out of XX apps being updated; however, it still reboots and won't get past that stage.
I've tried Odin 3.09 and 3.13, with the .pit and without and the attached picture is where I land "FAIL."
Any suggestions, threads, ideas?
Thank you in advance.
...aaaand I fixed it.
Thanks anyway!

Galaxy S7 G930U Unlocked stuck in boot loop - already flashed successfully but no fix

I'm really hoping you guys can help me out here. This is an S7 I bought from a Best Buy when I visited the US in 2017, and I got the Unlocked version so I would be able to use it back in my home country. Unfortunately, this is the second time I've had trouble with it in a span of 4 months and the first time it was a hardware problem and ended up quite expensive to get fixed.
Today I was using my phone normally when I decided to use the Google instant translation to translate something on my computer screen. That caused my phone to freeze, restart, and then tell me I was using an unauthorized flash and it was going to be locked, or something like that. Even after restarting a few more times, the phone would never get past that screen. I proceeded to factory reset/cache reset and from then on the phone just got stuck in a boot loop.
I learned that the fix would be to flash the phone. After a lot of work I found the G930UUESACSI1-20190930144640 firmware (the XAA version, for Unlocked) and successfully used Odin 3.13 at the Download Mode screen to flash my phone. It then restarted, went back to the blue screen, started installing some updates, when it was 100% it restarted again. Unfortunately, the loop remained. Galaxy S7 logo first, then the Samsung logo, then it just repeats.
I have also tried turning the phone off with the Recovery screen shut down option (since I can't seem to be able to turn it off with the power button right now), wait a few minutes, then turn it back on. Nothing changed.
Please, does anyone have any insight into this? What else could I possibly try, or what could I be doing wrong? I really don't want to send it to repair yet again in such a short time.
Many thanks in advance.
gabeblack said:
I'm really hoping you guys can help me out here. This is an S7 I bought from a Best Buy when I visited the US in 2017, and I got the Unlocked version so I would be able to use it back in my home country. Unfortunately, this is the second time I've had trouble with it in a span of 4 months and the first time it was a hardware problem and ended up quite expensive to get fixed.
Today I was using my phone normally when I decided to use the Google instant translation to translate something on my computer screen. That caused my phone to freeze, restart, and then tell me I was using an unauthorized flash and it was going to be locked, or something like that. Even after restarting a few more times, the phone would never get past that screen. I proceeded to factory reset/cache reset and from then on the phone just got stuck in a boot loop.
I learned that the fix would be to flash the phone. After a lot of work I found the G930UUESACSI1-20190930144640 firmware (the XAA version, for Unlocked) and successfully used Odin 3.13 at the Download Mode screen to flash my phone. It then restarted, went back to the blue screen, started installing some updates, when it was 100% it restarted again. Unfortunately, the loop remained. Galaxy S7 logo first, then the Samsung logo, then it just repeats.
I have also tried turning the phone off with the Recovery screen shut down option (since I can't seem to be able to turn it off with the power button right now), wait a few minutes, then turn it back on. Nothing changed.
Please, does anyone have any insight into this? What else could I possibly try, or what could I be doing wrong? I really don't want to send it to repair yet again in such a short time.
Many thanks in advance.
Click to expand...
Click to collapse
You need to clear the cache after flashing to get out of the boot loop.
Use the download key combo to restart. As soon as the screen goes black move to Volume up+home+power.
In the recovery menu choose clear/ Wipe cache, then choose reboot.
I apologize for not updating this thread before when it was still recent. The fact is that I didn't manage to fix my phone; clearing the cache after flashing did nothing to stop the loop.
I ended up taking the phone to the people who have fixed it in the past and after more than one month, they gave up. So I got my phone back and I want to try to give it another go before I just sell it for parts.
Unfortunately, my phone has come back even worse. Now it has no Recovery Menu to speak of, at least none that I can access; after a few seconds of the blue text on the top saying that it's entering recovery mode, it then proceeds to a blue screen saying: "Security Error: This phone has been flashed with unauthorized software and is locked.". I can still access Download Mode.
I have attempted flashing a few firmwares that I believe should have worked with my SM-G930U. Odin listed the attempts as "pass" and, after restarting and going back to the Download screen, it says the binary is Official. However, after trying to restart the phone normally, it starts displaying the blue screen again, and then, after going to Download mode, the binary is reverted to "Custom".
I believe right now the order of the day is to get the recovery menu to work again so I can do all the cache cleaning that seems to be required after flashing firmware. Any ideas at all on how I should proceed? Is there something specific I should download to fix the recovery menu?
How many files are you flashing in Odin, is it just 1 file in the AP slot, or 4 files: AP, BL, etc.? Also, is your phone rooted?
Drunkpilot said:
How many files are you flashing in Odin, is it just 1 file in the AP slot, or 4 files: AP, BL, etc.? Also, is your phone rooted?
Click to expand...
Click to collapse
Never rooted, was using the phone legit before it froze and entered boot loop. I flashed all 4 files, multiple times.
Someone tried fixing my phone a few days after I replied to this thread and some progress seems to have been made, but now the phone cannot get past a black screen with a "SBL Error! rdx_init!" in red text, and "upload mode" in yellow text. Still cannot access Recovery Mode, but Download Mode still works.
I did a little Googling on rdx_init errors and it seems I need a firmware dump from another G930U or something like that...any ideas on how I can proceed?
Flash it with Eng Boot in all slots using patched Odin. Reboot to recovery and wipe it. Reboot system. Then root it with advanced adb root. Links for all of this are here in xda. Enjoy
STA1NL3SS said:
Flash it with Eng Boot in all slots using patched Odin. Reboot to recovery and wipe it. Reboot system. Then root it with advanced adb root. Links for all of this are here in xda. Enjoy
Click to expand...
Click to collapse
Sorry, I'm not an expert at this by any means, I'm not sure what files to get. So far I've found and downloaded the following:
S7_Oreo_Nougat_Adb_Advanced_Root_V10
S7_Oreo_Nougat_Adb_Advanced_Root_V12
S7_Oreo_Su_Binary_Only_ADB_Root
But I had no luck flashing any of these cause my binary is 10. Is there any more help you can provide me? I really don't know how to proceed
gabeblack said:
Sorry, I'm not an expert at this by any means, I'm not sure what files to get. So far I've found and downloaded the following:
S7_Oreo_Nougat_Adb_Advanced_Root_V10
S7_Oreo_Nougat_Adb_Advanced_Root_V12
S7_Oreo_Su_Binary_Only_ADB_Root
But I had no luck flashing any of these cause my binary is 10. Is there any more help you can provide me? I really don't know how to proceed
Click to expand...
Click to collapse
I thought I had one in my phone, but I don't. If you look at the thread where you downloaded the Root_V12, you will see it. It's near the end of the thread somewhere.

Categories

Resources