Looking for a kernel that supports loop device for CM7 Kernel for the Thunderbolt.
Using MR2 Radio.
Wish to install debian onto my phone and it is a requirement.
Related
So my Evo 4g has Fresh Evo installed and is overclocked to 1.26 ghz.
my question is, I know how to back up my Rom using Rom Manager but how do I back up my Kernel? I know that the Kernel I am using will not work with other Roms. I am very happy with my setup but still want to mess around with other Roms.
Also, if I restore to another Rom will it screw up if that Rom is not compatible with this kernel? Last thing, if i do want to go back, where can I get the stock Evo Kernel?
Please help.
From all my testing its seems that clockworkmod backs up the kernal as well. I have different kernals for all the roms that i use. someone correct me if im worng but my hydra kernal does not work with evervolv and when i swich between evervolv and stock roms the kernal changes too
So when you switch between Roms, do you use Rom Manager?
Thank you for your help.
When i switch I reboot into recovery then go to backup/restore and restore the one i want. so if i want my hydra kernal with stock rom ill restor that or if i want evervolv with the kernal it comes with ill choose it. I know its swaping kernals becasue evervolv wont boot correctly with hydra kernal
Do all kernells work with all roms???:confused
htc desire
an does this kernel http://forum.xda-developers.com/showthread.php?t=682419
work with the rom:RCMixHD
Not all kernels work for all ROM's. Some are made up for Froyo, and some for Gingerbread. I read the OP and I did not see any restrictions, so it is probably fine for 2.2 and 2.3. Also, make sure the kernel is for your phone. You cannot use a kernel made for another phone. Make a nandroid backup before you flash.
Edit: I just saw you have a desire and the phone was from the desire forum...soooo you should be good..but like I said, you should make a backup before flashing anything.
kernel
I'm currently running the COS-DS 2.3.3 ROM with the latest BiffMod 2.2.1 Kernel. It works better than the kernel, which comes with COS-DS, but not every kernel will work with every rom. It also depends on your phones hardware.
nope. the kernels are set for certain types of roms.
Sent from my PC36100 using XDA App
How about mix the 2.2 kernel with 2.3.3 userland?
Hey everyone I'm kinda new to the whole kernel flashing business and I'm trying to flash the UV Trinity kernel to my Nexus S. From what I've read I only need to flash the zip from recovery without having to do any sort of wiping. The main problem when I tried this is that the phone went into a boot loop and wouldn't go past the boot animation for the kernel. I'm not sure if it's because the kernel is based off of 2.3.4 and I'm currently running CM-7.0.3. Morfic's thread indicated that the kernel was made for CM7 so I don't know what's going wrong here.
boredomkillz said:
Hey everyone I'm kinda new to the whole kernel flashing business and I'm trying to flash the UV Trinity kernel to my Nexus S. From what I've read I only need to flash the zip from recovery without having to do any sort of wiping. The main problem when I tried this is that the phone went into a boot loop and wouldn't go past the boot animation for the kernel. I'm not sure if it's because the kernel is based off of 2.3.4 and I'm currently running CM-7.0.3. Morfic's thread indicated that the kernel was made for CM7 so I don't know what's going wrong here.
Click to expand...
Click to collapse
You have a ROM based on 2.3.3, meaning it's not compatible with a kernel made for 2.3.4.
Try flashing the latest cm7 and then the kernel.
Sent from my Nexus S using Tapatalk
treUse said:
You have a ROM based on 2.3.3, meaning it's not compatible with a kernel made for 2.3.4.
Try flashing the latest cm7 and then the kernel.
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
Would it work if I tried a CM7 variant that's based off of the 2.3.4 source? I'm going for a stable phone and unsure about the nightly builds at this point. If not I'll probably just wait CM to update and release the rom.
boredomkillz said:
Would it work if I tried a CM7 variant that's based off of the 2.3.4 source? I'm going for a stable phone and unsure about the nightly builds at this point. If not I'll probably just wait CM to update and release the rom.
Click to expand...
Click to collapse
it should work on any 2.3.4 cm based roms.
whats the best combo for rom and kernal for the g2x.
im about to install the eagleblood 2.3.3bg (since it has the stock camera) and was looking for a kernal so i could oc it. thanks for the help
also whats best 2.3.3 or 2.3.4 or 2.3.5????
For the most part, rom choice is going to come down to personal preference. As for kernels, faux's is pretty popular. Personally, I'm running eagleblood 2.3.3 and stock kernel.
Sent from my LG-P999 using XDA Premium App
I am running Triggers 2.3.5 with Fauxs 0.3.5-sv OC to 1.4Ghz and it is awesome. No reboots or issues at all.
There is no kernel made for the ota (2.3.3) roms only 2.2.2 froyo, 2.3.5 cm, eb2.3.5 so basically any rom that is based off the new 2.3.3 ota will not have a oc kernel for it yet LG didn't release source, and best rom kernel combo is definitely cm, and fauxs latest or morfics it a toss up, but honestly the newest nightly runs so nice u wont need one and it has voodoo built in and boot up time is super quick, idk IMO oc kernels are not needed with this phone it is already sick quick I get 3100 quadrant with cm stock kernel, now if u want to save battery life grab a UV kernel
blondie or brunette?? LOL its all up to ur taste for roms and kernels! Im having a great time using the rom and kernel on my sig! But all depends on you and your phone... (some phones dont like oc/uv), the only way to know is to flash, flash flash and flash (watch out not to become a flashaholic...)
Any rooted 2.3.3 ROM, with the Stock Kernel, and LG Camera App.
Sent from my LG-P999 using XDA App
Hello Xda-developers community!
I have been having consecutive problems with trying to flash a custom kernel onto my Lg G2x.
I can successfully flash any custom ROM with ease, though when I go to flash the kernel, it installs successfully, but upon reboot the device never loads.
I gave it a good 10 minutes to load, though just sits at a black screen.
I'm not sure if I am doing something rong or not.
One of my attempts was to flash the Trinity kernel with CM7 already on my G2x, though upon successful installation, during reboot I simply get about a 5-10 second android robot logo, and then the screen just sits at black not loading.
If anyone would mind helping me solve this problem, or perhaps tell me if I am doing something wrong, I would greatly appreciate it!
If it doesn't boot then the kernel is not compatible with your rom. If you are running CM7 nightlies only the kernel supplied with it is compatible.
I have the latest CM7 release for the g2x at the moment.
I tried the Trinity Kernel with Bionix 2 and CM7, so far the same result.
I saw a you tube video promoting someone who had the Bionix 2 ROM and Trinity Kernel with each other. I tried flashing them both, but it never booted.
Are there any roms compatible with CM7 at the moment?
Or is it only the Eagle's blood ROM that has kernel compatibilities for the g2x.
iCraft said:
I have the latest CM7 release for the g2x at the moment.
I tried the Trinity Kernel with Bionix 2 and CM7, so far the same result.
I saw a you tube video promoting someone who had the Bionix 2 ROM and Trinity Kernel with each other. I tried flashing them both, but it never booted.
Are there any roms compatible with CM7 at the moment?
Or is it only the Eagle's blood ROM that has kernel compatibilities for the g2x.
Click to expand...
Click to collapse
The only kernels compatible with CM7 nightlies are the kernels packaged with the update zip for that nightly. Flashing anything else is just a waste of time and you are going to keep frustrating yourself to no end.
When you say the latest cm 7 for the G2x do you mean the latest nightly or the latest stable release 7.1? If you have the 7.1 you should be able to use the trinity ELP but if you are using a nightly build then you can only use whatever came with that build as Jboxer said already.
Edit There are a few that you can use for 7.1 not just trinity ELP just look in the thread for each kernel and they say which ROMS they are compatible with. Also eaglesblood 2.4 is based of cm7 so if it workes on EB 2.4 then it will work on cm 7.1. Also when you flash a kernel make sure you clear the cache and dalvik cache. And wehen you boot up for the firsdt time after clearing the dalvik cache it could take 10 min to boot up mikne usually takes about 5 minutes but I have seen it take up to 10 so keep that in mind.
I solved the problem, thanks! Now I was looking around for roms and I found an miui rom for the g2x.
I like the ROM, so any idea what kernel would work with that?
Sent from my LG-P999 using xda premium
Under developement, faux's kernels (based off cm7). 3 different types, cm7 stable, nightlies and a different version for nightlies. Miui works with one of his cm7 kernels. I believe it is 44s
Sent from my LG-P999 using xda premium
Ttabbal's Dragon 1.5.2 kernel for CM7 nightlies ..perfect combo!
Sent from my LG-P999 using xda premium