Related
Hello all. I have an early Christmas present for all the Stock firmware users.
I have created a usb tethering application that should work for all Android devices regardless of root access. The code is and will always be GPL. I used the azilink android app written by aziwoqpd--> http://forum.xda-develoers.com/showthread.php?t=481162
I have to give him lots of credit, because without his app this would not work.
This has been tested on the G1 and the Motorolla Droid. It should work on the Hero, MyTouch(Confirmed working), etc... The GUI should install and work on all versions (x86, x86_64) of Windows starting with XP.
The GUI that I have written controls the adb port forwarding and openvpn connection while showing status. Please test this application and let me know how it goes.
Download:
http://www.4shared.com/file/168168016/47ce692d/azilink-gui-setup-110.html
Source:
http://www.4shared.com/file/168521281/18f538f5/azilink-gui_src.html
has anyone tried this
So your telling me this is "wifi tether" for non rooted users?
G1-evolve said:
So your telling me this is "wifi tether" for non rooted users?
Click to expand...
Click to collapse
Nope. This is USB Tether for non rooted users
Link is down for azilink, use this link instead for more information:
http://code.google.com/p/azilink/
Confirmed working on Windows 7, and doesn't require root.
Edit: The zip in original post contains the GUI, the apk, and open vpn. Start the apk, then click "connect" on the azilink-gui. Make sure "USB debugging" is enabled in Settings on your phone.
Thanks a lot.
kevev said:
Nope. This is USB Tether for non rooted users
Click to expand...
Click to collapse
What's the difference?
G1-evolve said:
What's the difference?
Click to expand...
Click to collapse
Wifi tether and USB tether are two totally different methods of tethering.
Wifi tether doesn't utilize the usb cable to tether.
G1-evolve said:
What's the difference?
Click to expand...
Click to collapse
USB Tether requires the device to be connected to the Computer via USB.
Wifi tether allows users to wirelessly connect to your device via their Computer.
Wisefire said:
USB Tether requires the device to be connected to the Computer via USB.
Wifi tether allows users to wirelessly connect to your device via their Computer.
Click to expand...
Click to collapse
I see, so say I want to put this on my girlfriends Mytouch, does she NEED ADB installed on her PC?
G1-evolve said:
I see, so say I want to put this on my girlfriends Mytouch, does she NEED ADB installed on her PC?
Click to expand...
Click to collapse
ADB is included in the azilink-gui installer. The only thing you will need to do manually is install the driver which is included in the install directory.
G1-evolve said:
I see, so say I want to put this on my girlfriends Mytouch, does she NEED ADB installed on her PC?
Click to expand...
Click to collapse
Download ADB from here:
http://azilink.googlecode.com/files/adb.zip
I'm not sure if ADB is built into the azilink-gui, so it's safe to just install it on your girlfriend's PC.
confined
wohoo. worx fine..thankyou awsome job
fit333 said:
wohoo. worx fine..thankyou awsome job
Click to expand...
Click to collapse
Glad to see it works on the MyTouch.
The source has been posted to the first page.
Edit: Kept messing around until my Charge finally mounted itself again as a CD drive; then I opened the "drive" and quickly grabbed the USB driver package, which I installed from the desktop. Now my Charge is recognized and I was able to root using adb with no problem.
The driver package is an 8.1MB .exe file; PM me if you need it emailed to you.
Problem:
I'm trying to root my Charge and can't get adb to see the device. I have Samsung drivers installed and my Fascinate is seen just fine. Not only can I not access the Charge via adb, I can't even connect to USB storage to see the Micro-SD card on it.
Any help much appreciated!
Edit: Thanks to a post by imnuts on another forum, I learned that the Charge has its own drivers which can be installed if it is first connected with USB debugging turned OFF. It mounts as a virtual CD drive, from which the drivers can be installed. This at least allows me to open the SD card on the device. However, when I turn USB debugging back on, my computer STILL can't find the drivers and isn't happy with any directory I point it to.
droidmark said:
Edit: Kept messing around until my Charge finally mounted itself again as a CD drive; then I opened the "drive" and quickly grabbed the USB driver package, which I installed from the desktop. Now my Charge is recognized and I was able to root using adb with no problem.
The driver package is an 8.1MB .exe file; PM me if you need it emailed to you.
Problem:
I'm trying to root my Charge and can't get adb to see the device. I have Samsung drivers installed and my Fascinate is seen just fine. Not only can I not access the Charge via adb, I can't even connect to USB storage to see the Micro-SD card on it.
Any help much appreciated!
Edit: Thanks to a post by imnuts on another forum, I learned that the Charge has its own drivers which can be installed if it is first connected with USB debugging turned OFF. It mounts as a virtual CD drive, from which the drivers can be installed. This at least allows me to open the SD card on the device. However, when I turn USB debugging back on, my computer STILL can't find the drivers and isn't happy with any directory I point it to.
Click to expand...
Click to collapse
Hi - Would really appreciate your help here. Thanks for the tip on turning debugging off to get to the phone so I could install the USB drivers. Problem now is that ADB just refuses to connect to it. It shows up asa disk drive in Devices, but when I do a kill-server then start-server then adb devices, it doesn't list any devices, and an adb shell just says device not found.
Do I need to reboot Windows, or the phone? Seems unlikely. I can open a window to the phone, but can't get access to install the Gingerbreak and su files I need to root it. Going crazy!
Thanks,
Eric
Try rebooting both. Couldn't hurt.
Oh yeah, and if you haven't make sure the phone is back in debug mode.
Sent from my SCH-I510 using XDA App
Black-Falcon said:
Try rebooting both. Couldn't hurt.
Oh yeah, and if you haven't make sure the phone is back in debug mode.
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
Well, I'll be a monkey's brother in law. I rebooted both, checked debig mode - and it wasn't on, to my surprise. I've turned it on and off a bunch of times, so...
Anyway, I was able to finally get adb working!!! Yaaaayyy! But now I'm trying to root it, and Superuser doesn't show as an app, and Root Explorer says the f-er isn't rooted. And the Gingersnap Root Utility I've been trying to use, says it's all good to go, but its not.
Gonna try a different method, but if anyone has any ideas, I'm open.
Thanks!!!!
Use gingerbreak.
You gotta download superuser from the market
Sent from my SCH-I510 using XDA App
ClarkSt said:
Well, I'll be a monkey's brother in law. I rebooted both, checked debig mode - and it wasn't on, to my surprise. I've turned it on and off a bunch of times, so...
Anyway, I was able to finally get adb working!!! Yaaaayyy! But now I'm trying to root it, and Superuser doesn't show as an app, and Root Explorer says the f-er isn't rooted. And the Gingersnap Root Utility I've been trying to use, says it's all good to go, but its not.
Gonna try a different method, but if anyone has any ideas, I'm open.
Thanks!!!!
Click to expand...
Click to collapse
Try downloading busybox from the market, or downloading titanium backup and hit the "problems" button when you open it and select get busy box
Black-Falcon said:
Use gingerbreak.
You gotta download superuser from the market
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
Tried GingerBreak. No good. "permission denied".
Good idea - I got Busybox installed this way, but still no joy from Gingerbreak.
Just flash the ED1 odin package and done
Sent from my SCH-I510 using XDA App
DroidXcon said:
Just flash the ED1 odin package and done
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
If I could flash anything I'd be rooted already, wouldn't I? How do I flash? ROM Manager needs root. Vicious circle.
I've heard that its not possible to root the Charge using current methods since the f-ing update the other day.
ClarkSt said:
If I could flash anything I'd be rooted already, wouldn't I? How do I flash? ROM Manager needs root. Vicious circle.
I've heard that its not possible to root the Charge using current methods since the f-ing update the other day.
Click to expand...
Click to collapse
Check the development thread for the Charge. There's a thread on how to rollback to ED1 with root using Odin.
Edit: Direct link: http://forum.xda-developers.com/showthread.php?t=1085190
droidmark said:
Edit: Kept messing around until my Charge finally mounted itself again as a CD drive; then I opened the "drive" and quickly grabbed the USB driver package, which I installed from the desktop. Now my Charge is recognized and I was able to root using adb with no problem.
The driver package is an 8.1MB .exe file; PM me if you need it emailed to you.
Problem:
I'm trying to root my Charge and can't get adb to see the device. I have Samsung drivers installed and my Fascinate is seen just fine. Not only can I not access the Charge via adb, I can't even connect to USB storage to see the Micro-SD card on it.
Any help much appreciated!
Edit: Thanks to a post by imnuts on another forum, I learned that the Charge has its own drivers which can be installed if it is first connected with USB debugging turned OFF. It mounts as a virtual CD drive, from which the drivers can be installed. This at least allows me to open the SD card on the device. However, when I turn USB debugging back on, my computer STILL can't find the drivers and isn't happy with any directory I point it to.
Click to expand...
Click to collapse
Dude - THANK YOU!!!! I could not get those drivers to install!!!
Please - Stickie!!!
If you want the drivers and don't trust the sources posted anywhere (we're not trustworth ?) you can get them from the phone itself. They are located in the file /system/etc/autorun.iso and you can extract them from it.
I have erased the contents of the phones internal USB storage. Now I notice that I cant mount to my PC.
Anybody know what happening or had same problem
Have you already tried formatting with CWM?
Perhaps this thread contains some useful information for you.
maksymillian said:
I have erased the contents of the phones internal USB storage. Now I notice that I cant mount to my PC.
Anybody know what happening or had same problem
Click to expand...
Click to collapse
I know this is a long shot but go to your dialer and input *#*#8778#*#* and make sure it looks like this pic. I fool with QPST and other things and sometimes forget to change the settings back to PDA and it will not mount. Long shot but what the hey...
alnova1 said:
I know this is a long shot but go to your dialer and input *#*#8778#*#* and make sure it looks like this pic. I fool with QPST and other things and sometimes forget to change the settings back to PDA and it will not mount. Long shot but what the hey...
Click to expand...
Click to collapse
Typed it in and got nothing. Using the android dialler when I pressed the last * the dialer cleared and did nothing.
Just installed the SDK so I could use (hopefully) ADB. When trying to install the Google driver rev4 windows says that rev 4 is no better than the one currently installed.
Also when I connect to the PC it says that the USB device is not recognised either.
I reckon my next thing to try flashing a new Rom via ROM manager.
well that didnt work in fact it has got considerably worse. I used ROM manager to download and install a new rom but didnt install the Gapps how daft do I feel now cos all I got is version of Blandroid running with no Android Market access to download ROM Manager.
I can access my WiFi network so I thought I would simply visit XDA via the mobile browser and download a fresh version of CM7 and then re-flash via ClockworkMod . However all I get is download fail error. I guess it doesn't know where to save the file.
So to recapp I have the following
a Nexus S (running Blandroid ROM)
a Win XP laptop that does not recognise my Nexus S (therefore cant install the Google driver to use ADB)
The Nexus S recovery is ClockworkMod and accessible.
I cannot accept that it is bricked (not just yet anyway)
I have another Laptop with Ubuntu installed. Will this help me in anyway to find a fix. I am not that experienced in Linux unfortunately.
1
i have the same problem. only thing you can try is.
pull out battery. let something metal touch the usb conecter .conecting the metal to a unload source(for static electricity.)
wait couple of hours,and try again.
if that didnt work.
2
open your nexus.
unplug all cables and screws from the main board.
again touch the usb conecter with something metal that has a ground source.
and try again.
the last step worked for me the 1st time pluging it in after i did that.
after that. usb didnt work again.
it probably has to do something with the usb phone charger and static electricity.
but i havent tested it.
will give that a try when I have a bit more time.
In the meantime I have been setting up ADB on my other laptop running Ubuntu 11.04. But unfortunately the Nexus S didnt register on the OS either. I thought you didnt need additional drivers for Linux only windows! I am really puzzled now as I thought the Linux option would have allowed me to flash a different ROM other than Blandroid (which isnt bad its just I dont have the Gapps installed)
maksymillian said:
will give that a try when I have a bit more time.
In the meantime I have been setting up ADB on my other laptop running Ubuntu 11.04. But unfortunately the Nexus S didnt register on the OS either. I thought you didnt need additional drivers for Linux only windows! I am really puzzled now as I thought the Linux option would have allowed me to flash a different ROM other than Blandroid (which isnt bad its just I dont have the Gapps installed)
Click to expand...
Click to collapse
you still have wifi/3G and CWM or bloothoot?
download the Gapps zip. put it on dropbox or any hosting site.download it trough your mobile browser and flash it trug CWM.
or use blutethoot to download it.
might be a short fix.until you get USB to work.
(this is how i do it cuz my usb doesnt work.)
I did try that but for some reason after stating that the download had started - Download Unsuccessful was displayed in the notification area. As useual I open a door only to find a brick wall on the other side.
In the meantime I am back with my HTC Hero.
Thanks for helping anyway!
maksymillian said:
I did try that but for some reason after stating that the download had started - Download Unsuccessful was displayed in the notification area. As useual I open a door only to find a brick wall on the other side.
In the meantime I am back with my HTC Hero.
Thanks for helping anyway!
Click to expand...
Click to collapse
try difrent download solutuins.
seeing you have HTC here.why not tranver your zip trug your hero to your Ns?(with bluethoot)
boy, i hope you haven't started tearing your phone apart yet...
since you still have access to cwm: try to format your sdcard with it. looks like you haven't done that yet.
I would try to uninstall all drivers and associated programs on your PC. Then reinstall the drivers. Windows can be very finicky as you know. Also try PDANET drivers.
ghost010 said:
try difrent download solutuins.
seeing you have HTC here.why not tranver your zip trug your hero to your Ns?(with bluethoot)
Click to expand...
Click to collapse
10 out of 10 - I just got my market back . downloading rom manager will shortly be back on CM7.
USB connection still not working yet but at least I got my account back on the NS and so the phone is usable
wild1z said:
I would try to uninstall all drivers and associated programs on your PC. Then reinstall the drivers. Windows can be very finicky as you know. Also try PDANET drivers.
Click to expand...
Click to collapse
The NS wouldn't connect to laptop with Ubuntu running. I am beginning to think that I have a faulty micro USB port.
Ill try the pdanet drivers later tonight - are they different from the google rev 4 drivers?
maksymillian said:
The NS wouldn't connect to laptop with Ubuntu running. I am beginning to think that I have a faulty micro USB port.
Ill try the pdanet drivers later tonight - are they different from the google rev 4 drivers?
Click to expand...
Click to collapse
Same PC with dual boot? Yeah, try another cord and a another PC. The fact that you plugged it in and it's recognized in some way in the tray says something is fubar. I just don't know if it is the phone though. Best of luck.
Nah, different laptop and different cable. Hope that it charges OK. Gonna have to get a WiFi file transfer app working to move files to and from.
glad to help out :3
there are allot of people that have this USB isue and its HW NS related. nothing we actually can do about it.plus it also happens after changing kernels and roms(i supose) overclocking might be 1 of the reasons thus the voltages not being original.
btw,sorry for my half assed english x3
Double check the modem/pda settings mentioned in post #3. Should be set to pda to see the files on the SD.
Moritzio said:
Double check the modem/pda settings mentioned in post #3. Should be set to pda to see the files on the SD.
Click to expand...
Click to collapse
Having the same issue. I tried that, no such luck.
My computer *did* connect at one point though... couldn't mount USB storage (wasn't prompted) but it did ask for a driver, and currently has a Samsug USB one installed. It won't accept the SDK driver (not 64-bit capable? Or NS4G? Idk...)
Moritzio said:
Double check the modem/pda settings mentioned in post #3. Should be set to pda to see the files on the SD.
Click to expand...
Click to collapse
I got nothing when I entered *#*#8778#*#*. I simply typed it in using the keypad on the dialer. Is there something else I should be doing?
I found this helpful information to share with you
This guide will only work if you have rooted your device and with a Windows PC. We will not be liable for any damages arising from your use of this guide. Use the presented information at your own risk.
Remember that the tool is still beta software, so expect a lot of kinks and bugs. You can surf using Google Chrome, Firefox, Opera, or Dolphin Browser,GOOGLE PLAY MARKET although Google Chrome complains of not having an Internet connection even though it works. Ping and low-level ICMP packets don’t seem to work either.
Requirements
A rooted Android phone
Desktop or laptop computer running Windows
Working broadband Internet connection on the desktop or laptop
Android Software Development Kit (SDK) installed on the desktop or laptop (optional but recommended)
Instructions
1) Download the reverse tethering tools from here http://forum.xda-developers.com/attachment.php?attachmentid=829285&d=1324833033 and save the file to your computer. The ZIP file contains AndroidTool.exe (Android USB Tunnel tool for your Windows machine), ADB, and the Android APK (Beta Android USB Tunnel tool for your Android phone).
2) Extract the ZIP file to a folder on your computer.
Enable USB debugging on your phone by going to Settings > Applications > Development > USB Debugging.
3) Go to the folder where you extracted the ZIP file’s contents.
Run AndroidTool.exe.
Connect your phone to your PC using a USB cable.
In the Android USB Tunnel window, click on the Refresh Devices button.
From the list on the right of the detected devices, select a Domain Name Server (DNS) to use.
4) Click the Show Android Interface button. This will install the app and other needed binaries to your phone.
If the Superuser app on your phone asks whether to allow “USB Tunnel,” choose to allow the app. If the process crashes after receiving Superuser rights, close the Android USB Tunnel Windows application and repeat the procedure from the start.
5) Click on the Connect button on the Android USB Tunnel window on your computer.
6) Again, if the Superuser app on your phone asks, choose to allow “USB Tunnel.”
Congratulations! You have successfully reverse-tethered your Android phone to your PC.
Damn man this is cool.
Yeah ... it's cool ... but why I can't download files? I fail download file apk from market and other site. Bug?
wtf :|
threadjacking :|
http://forum.xda-developers.com/showthread.php?t=1371345
Click to expand...
Click to collapse
I made this thread just to help others,which i found on the net...and it is not my creation...LoL...
U should give the original developer a credit on ur thread at least..
Its an opensource so finding the exact developer is impossible for each version...And i dont have benefits in posting this thread...............................................
Reverse USB Tether
Yeah it works fine , having been using it since a few weeks.
But I need Reverse Wifi Tether.
I believe it was possible to enable AD Hoc for Wifi connections for Froyo a few months back.If you have any way to get it working for this device , Pls share it , would very much appreciate it.
When i press connect it will connect but after a couple secs the app force closes .Why is it happenning plz send me the FIX .
God Thanks for your work.
i hav been using this for a month...there is no problem arised from my side
tu55h4r said:
Yeah it works fine , having been using it since a few weeks.
But I need Reverse Wifi Tether.
I believe it was possible to enable AD Hoc for Wifi connections for Froyo a few months back.If you have any way to get it working for this device , Pls share it , would very much appreciate it.
Click to expand...
Click to collapse
you should try connectifity (windows 7) to sharing internet connection via wifi
any new upgrades?on stock firmware with root the game don't see the connection fot the download of the files :/
currently this release supports browsing through android
web browser oly
but with the ics rom on my i9003 i could download sd files for the games :/
Fabiox08 said:
but with the ics rom on my i9003 i could download sd files for the games :/
Click to expand...
Click to collapse
is that possible ?
sharp87 said:
currently this release supports browsing through android
web browser oly
Click to expand...
Click to collapse
nope.
Also can play youtube video and play game online such little empire and paradise island. And can download sdfiles to but it depend your modem connection
iamno3 said:
nope.
Also can play youtube video and play game online such little empire and paradise island. And can download sdfiles to but it depend your modem connection
Click to expand...
Click to collapse
ya i came to know that yesterday oly
My galaxy sl (i9003) problem
My galaxy sl (i9003) not listed when i press refresh
i have installed samsung kies and android sdk kit
fandroid7 said:
My galaxy sl (i9003) not listed when i press refresh
i have installed samsung kies and android sdk kit
Click to expand...
Click to collapse
may be u should be in usb debugging and mass storage mode
I9003 powered by MIUI V8.5
tu55h4r said:
Yeah it works fine , having been using it since a few weeks.
But I need Reverse Wifi Tether.
I believe it was possible to enable AD Hoc for Wifi connections for Froyo a few months back.If you have any way to get it working for this device , Pls share it , would very much appreciate it.
Click to expand...
Click to collapse
use connectify.
I need help figuring out how to root a RCA RCT6077W22 tablet. It has Android Jellybean 4.1.1- v1.0.1, 8GB built in storage, 1GHZ processor, Google apps installed, kernel is [email protected]#132.I'd like to try to root it from the tablet itself if not I'm familiar with SuperOneClick as I've used it for my Samsung Galaxy S 4G before I should it. If it comes to that option I need to be able to use a rooting program on my computer that does not require internet the only internet I am able to use is the libraries. I have a laptop but no charger so my laptop is dead. I'm not a noon when it comes to rooting as I've mentioned I've done it before. Just need help finding a root for this tablet. I appreciate any help I get and thank you. If you need more info feel free to ask. I've also looked at the topic about the 4GB but its not that helpful is why I created my own topic.
deathscreations said:
I need help figuring out how to root a RCA RCT6077W22 tablet. It has Android Jellybean 4.1.1- v1.0.1, 8GB built in storage, 1GHZ processor, Google apps installed, kernel is [email protected]#132.I'd like to try to root it from the tablet itself if not I'm familiar with SuperOneClick as I've used it for my Samsung Galaxy S 4G before I should it. If it comes to that option I need to be able to use a rooting program on my computer that does not require internet the only internet I am able to use is the libraries. I have a laptop but no charger so my laptop is dead. I'm not a noon when it comes to rooting as I've mentioned I've done it before. Just need help finding a root for this tablet. I appreciate any help I get and thank you. If you need more info feel free to ask. I've also looked at the topic about the 4GB but its not that helpful is why I created my own topic.
Click to expand...
Click to collapse
Did u figure out how to root your rca tablet....I have one and I need mine rooted also I can't store any apps on my ad card
Can you give more specifics such as the the model number, what version of android is it running?
Sent from my Nexus 5 using xda app-developers app
I have the rct6378w2 RCA 7' 8GB tablet (4.2.2 JB). (Black Friday 2013 Walmart for $49)
I was able to root it by first installing the pdanet drivers (for adb access). And then using the kingo app, which you can get from http://www.kingoapp.com/.
Its free but closed source. I found it via this youtube video. https://www.youtube.com/watch?v=8MiZtZCqu4k
Worked even with the 1.0.2 update installed (which I have no clue what it did (17MB).
Takenover83 said:
I have the rct6378w2 RCA 7' 8GB tablet (4.2.2 JB). (Black Friday 2013 Walmart for $49)
I was able to root it by first installing the pdanet drivers (for adb access). And then using the kingo app, which you can get from http://www.kingoapp.com/.
Its free but closed source. I found it via this youtube video. https://www.youtube.com/watch?v=8MiZtZCqu4k
Worked even with the 1.0.2 update installed (which I have no clue what it did (17MB).
Click to expand...
Click to collapse
TAHNK YOU Takenover83 you are amazing. I rooted my tablet same model and set up as yours.
frarredo here is the information you were asking about in the picks below..
Please take notice to picture Screenshot_2013-11-29-23-15-32.png running bubble launcher, xposed framework , and xhalofloaingwind, to muliwindows on the tablet and all android phones,
Sorry here is the last pic it did not let me upload
Help
Takenover83 said:
I have the rct6378w2 RCA 7' 8GB tablet (4.2.2 JB). (Black Friday 2013 Walmart for $49)
l]
Worked even with the 1.0.2 update installed (which I have no clue what it did (17MB).
Click to expand...
Click to collapse
I cannot get pdanet to get the drivers. I cant find any drivers anywhere. Pdanet says to click ok after connecting, and it just says no android device found..I think there's an error box too.. I don't know how to fix it. I also have the tablet from the black friday event. Exact same one. Also, I have USB debugging on...
UPDATE: I found out the problem! The support files weren't in the root file I had the .exe in. I just moved the .exe to the same folder with the support files, and now I'm rooted and ready! Thanks!
wy3r5 said:
I cannot get pdanet to get the drivers. I cant find any drivers anywhere. Pdanet says to click ok after connecting, and it just says no android device found..I think there's an error box too.. I don't know how to fix it. I also have the tablet from the black friday event. Exact same one. Also, I have USB debugging on...
UPDATE: I found out the problem! The support files weren't in the root file I had the .exe in. I just moved the .exe to the same folder with the support files, and now I'm rooted and ready! Thanks!
Click to expand...
Click to collapse
how are you turning on usb debugging? I also have this tablet(purchased on black Friday from Walmart like everyone else) and mine doesn't seem to have that option anywhere. in fact, compared to the previous two android products I have, this device seems to lack ALOT of available functions. though I am capable of navigating a recovery menu at boot. but that doesn't do me any good for using pdanet. that seems to be my biggest road block. pdanet wont install because the onl;y way I can allow my device to connect to my pc with adp is using the adp updater in the recovery boot menu.
Desarial said:
how are you turning on usb debugging? I also have this tablet(purchased on black Friday from Walmart like everyone else) and mine doesn't seem to have that option anywhere. in fact, compared to the previous two android products I have, this device seems to lack ALOT of available functions. though I am capable of navigating a recovery menu at boot. but that doesn't do me any good for using pdanet. that seems to be my biggest road block. pdanet wont install because the onl;y way I can allow my device to connect to my pc with adp is using the adp updater in the recovery boot menu.
Click to expand...
Click to collapse
It is a hidden option that needs to be enabled. Follow this guide: www ninjaromeo com / enable-usb-debugging-developer-options-jelly-bean/
I just enabled this option on my Walmart BF 7" RCA RCT6378W2 tablet.
Sorry I had to mangle the link because XDA wont let me link external sources yet.
Glad I could help a few. Now, someone get on a functional recovery ;p
I have poked around a little at the stock recovery, backing it up, etc.. But am not brave enough to try and get CWM working on it.
I was able to use th Xposed framework for a few mod's no problem. Battery mod, reboot menu, hide navbar, etc.. But Xposed can only do so much.
Edit: I heard on reddit this tool also works for rooting. I have not tested it (already rooted with the other method).
http://www.cydiaimpactor.com/
Getting Debugging to work.
I was not drunk when I made this post...I have the RCT6378W2 if you go to about tablet in your settings and repeatedly tap the build number...the deveolper options will appear...I fell out of my seat when i discovered this.
On a side note...if you repeatedly tap the android version...a cute picture of the android jellybean will appear. Try it.
rca 7" dual core tablet root
Takenover83 said:
Glad I could help a few. Now, someone get on a functional recovery ;p
I have poked around a little at the stock recovery, backing it up, etc.. But am not brave enough to try and get CWM working on it.
I was able to use th Xposed framework for a few mod's no problem. Battery mod, reboot menu, hide navbar, etc.. But Xposed can only do so much.
Edit: I heard on reddit this tool also works for rooting. I have not tested it (already rooted with the other method).
http://www.cydiaimpactor.com/
Click to expand...
Click to collapse
im not down with kingo, too risky! gonna try impactor. i will report back soon :fingers-crossed:
---------- Post added at 09:31 PM ---------- Previous post was at 09:15 PM ----------
1: Install drivers. Seeing as RCA does not provide drivers, we had to find some that work. That's where PDANET comes in. Their drivers support a very wide range of Android devices. We are not installing it to tether. We just want the drivers it provides. So download PDANET, install, let it detect your device, install the drivers, and then afterwords you can uninstall it.
2: Enable Developer Options. Settings>About tablet> Tap Build Number a bunch of times till it's enabled.
3: Enable USB Debugging. Options>Developer Options>Click On (up top)>Then checkmark USB Debugging
That should clear up some of the confusion in this thread. How you root after step 3 is up to you. Personally, I did it with Kango. Which was straight forward. Connect device, hit a button, Say yes to a couple questions, reboot, presto done.
cueballs said:
It is a hidden option that needs to be enabled. Follow this guide: www ninjaromeo com / enable-usb-debugging-developer-options-jelly-bean/
I just enabled this option on my Walmart BF 7" RCA RCT6378W2 tablet.
Sorry I had to mangle the link because XDA wont let me link external sources yet.
Click to expand...
Click to collapse
Thanks, that sorted things out.
To make clear, and aid in any other inquiries, I managed to find an ADP connection mode, among other android update features. with the device off, hold volume up while turning the device on. it should boot to an image of an android with an open chest panel and the words, "no command". if you push volume up again it will provide you with options and instructions on how to execute. you can manual update the device with an SDK through USB ADP mode this way. I'm not sure if that makes anything simpler or generates a work around but I hope it helps with future development for this device.
Well got root now we need a recovery...
For some reason when trying to make sure I can send adb commands to my tablet, I am showing no devices connected. I check in device manager and it shows up as Android ADB interface for the tablet. These drivers were installed with the latest version of PDANet. Thoughts or how were you all able to get the drivers fully loaded and working? I have developer options already enabled and USB debugging mode is checked.
Info: RCA RCT6378W2 Tablet
Android 4.2.2
Kernal 3.0.36+
PDANet+ 4.12
Windows 7 64 Bit (I also tried it on my windows 7 32 bit computer)
GloryFreak said:
For some reason when trying to make sure I can send adb commands to my tablet, I am showing no devices connected. I check in device manager and it shows up as Android ADB interface for the tablet. These drivers were installed with the latest version of PDANet. Thoughts or how were you all able to get the drivers fully loaded and working? I have developer options already enabled and USB debugging mode is checked.
Info: RCA RCT6378W2 Tablet
Android 4.2.2
Kernal 3.0.36+
PDANet+ 4.12
Windows 7 64 Bit (I also tried it on my windows 7 32 bit computer)
Click to expand...
Click to collapse
You need to create "adb_usb.ini" in "Users>Username>.android".
Inside "adb_usb.ini" insert "0x2207" and save.
Source: http://blog.fh-kaernten.at/wehr/?p=1182
I need some help rooting this tablet. The point is when im installing the pdanet drivers the screen hangs saying installing drivers.. i finally was able to get the driver installed. but then king root can not connect to it. i checked the device manage and the abd phone is installed. so im not sure what im doing wrong.
scooter29 said:
I need some help rooting this tablet. The point is when im installing the pdanet drivers the screen hangs saying installing drivers.. i finally was able to get the driver installed. but then king root can not connect to it. i checked the device manage and the abd phone is installed. so im not sure what im doing wrong.
Click to expand...
Click to collapse
I had this problem too. make sure you're using the most recent version of pdanet. for whatever reason the older version just hang there and dont work right.
Installed the latest pdanet. It wont install the driver. I checked the device manager and it still shows the device without the driver. not sure what else to try..