Ok guys so i think i messed up pretty bad. Ive rooted quite a bit of things and this didnt seem too difficult. Anyways after i hit the root.batch and it ran thru like normally. it said phone updated like it was supposed to do. Well i went to restart it and when it came back on the screen is all messed up. It loaded up normally. Tergra and asus came up like normal but then it goes crazy.
If you did the NVidia flash root technique then probably you missed the first step of copying and replacing the right boot.img file into the root directory. I did that and got the exact same results.
Make sure you have the correct boot.img file for your tablet.
I got this fixed lol. No idea what i did. I just flashed back to stock. I rooted it now. What should i do next. I got root and recovery already
The revolver ROM is pretty sweet. Snappy with all the Honeycomb bells and whistles.
Can i go straight from stock rooted to any room now? I heard the prime rom is pretty solid too. Is this true?
With CWM installed, you should be able to flash from stock rooted to Revolver or Prime. I have no experience with Prime but have heard good things. Make sure you make a Nandroid backup of your current configuration through CWM (just in case). You do not have to wipe data for Revolver (or at least I didn't anyway).
Related
Ok, so my phone is a rooted Droid 2, and all my root required apps seem to be working fine. Well, I wanted to try some new roms, and most definitely backup my phone. So I start Rom manager, flash clockwork recovery, it tells me that was successful, then I try to backup current ROM, and it restarts my phone, and it loads up like nothing has changed. I go to Manage and restore current backups, and there is nothing there. If it makes a difference, the little loading swirl at the bottom is basically always there.
I'm quite confused, I thought this was a straight forward application, but it just seems not to be doing anything. Any help is appreciated.
I'm afraid I won't be much help but the exact same thing happened with my rooted Captivate. According to what I've read on CyanogenMod.com, when you flash Clockwork, it's supposed to put you in recovery. Mine didn't do that, but in ROM Manager, it lists Clockwork as my current recovery. I also tried to backup my current ROM and it did go into recovery and then rebooted and I had the same result as you. I read that you can't flash Clockwork on Froyo and if that's true, it's going to be a pain in the butt to flash back to Eclair, flash Clockwork, reflash Froyo, then try to install Cyanogen. I'm hoping someone will tell me there's either a Clockwork for Froyo or an easier way to do this.
I had same problems when first using ROM Manager. I found out eventually that the little swirls are ads loading.
After upgrading to Premium and getting rid of the ads, ROM Manager has worked fine for me.
Wildfire
CyanogenMod 6 RC2
Well I ordered a G2X the other day and finally I received it. It came with Gingerbread 2.3.3 from the factory. (worked flawlessly) Keep reading.
After a couple days I wanted to try out CM7 on it. So, I rooted the phone by using NVflash and doing all that good stuff, then I flashed the phone with (Gingerbread OTA 2.3.3 Rooted flashable zip v1.0.0) I couldn't get root with SuperOneClick so that was my only option. Well I got root and that's when the fun started.
I installed CM7 on it, seemed to run fine, looked fine. But simple me, I wanted to go back to Plane jane 2.3.3 So, I did all the usual stuff (backing up, wiping data, formatting caches), then I ran OneClickRecoveryFlasher...and restored the phone with LG-P999-V10f.zip (supposedly a stock flash for 2.2.2)
well it all seemed to work fine apon finishing. It booted fine, ran ok. However now I have some really bad problems. The major one is that my wifi doesn't work worth a damn now, the connection is highly intermittent. I can't use the market to download apps because it dies out often, along with anything else network related. (browsing works 5% of the time) You catch my drift. My other android phones have no trouble with anything. Now here where it gets weird, I supposedly restored my phone back to stock. However, the phone reports a proper android version 2.2.2 which is what I flashed it to. However it shows kernel 2.6.32.9 Baseband is July 15th 2011. When I use LG's phone update tool it says I am running V21E which is Gingerbread 2.3.3 ...but that's not true because it is actually 2.2.2
I have no clue what to do, I am stuck. I just want to either have a stock G2X running either 2.2.2 or 2.3.3
beast6228 said:
Well I ordered a G2X the other day and finally I received it. It came with Gingerbread 2.3.3 from the factory. (worked flawlessly) Keep reading.
After a couple days I wanted to try out CM7 on it. So, I rooted the phone by using NVflash and doing all that good stuff, then I flashed the phone with (Gingerbread OTA 2.3.3 Rooted flashable zip v1.0.0) I couldn't get root with SuperOneClick so that was my only option. Well I got root and that's when the fun started.
I installed CM7 on it, seemed to run fine, looked fine. But simple me, I wanted to go back to Plane jane 2.3.3 So, I did all the usual stuff (backing up, wiping data, formatting caches), then I ran OneClickRecoveryFlasher...and restored the phone with LG-P999-V10f.zip (supposedly a stock flash for 2.2.2)
well it all seemed to work fine apon finishing. It booted fine, ran ok. However now I have some really bad problems. The major one is that my wifi doesn't work worth a damn now, the connection is highly intermittent. I can't use the market to download apps because it dies out often, along with anything else network related. (browsing works 5% of the time) You catch my drift. My other android phones have no trouble with anything. Now here where it gets weird, I supposedly restored my phone back to stock. However, the phone reports a proper android version 2.2.2 which is what I flashed it to. However it shows kernel 2.6.32.9 Baseband is July 15th 2011. When I use LG's phone update tool it says I am running V21E which is Gingerbread 2.3.3 ...but that's not true because it is actually 2.2.2
I have no clue what to do, I am stuck. I just want to either have a stock G2X running either 2.2.2 or 2.3.3
Click to expand...
Click to collapse
You are probably going to have use Xboarders ROM then flash the unroot.zip he has in this thread http://forum.xda-developers.com/showthread.php?t=1158513.
See if that works to get you back to 2.3.3 completely stock.
It says that because it checks the baseband to see how recent it was, that's why it thinks you're on v21e.
As of now, there's no way to flash back to the old baseband, since people don't include the baseband in their ROMs, as that can cause a whole host of problems. The solution is to do exactly what tidewaterns said, that just gives you a little extra background info.
I am going to give this a try and see what happens, I will post results.
Well I tried the slimmed down version of Xboarders's rom and it seems to be working well so far. I originally installed his Stock OTA rom and that's when I started having problems. Oh well. thanks guys for all the help.
Crash course about root and roms: Superoneclick roots the rom you have in place. Flashing xboarders rom didn't "give you root" for the other roms you flashed, it is simply one rom out of many that is pre-rooted by the dev who packaged it up. When you flash it you have a rom that is rooted. If you had flashed CM7 (another rom that provides root access to its system files) then you'd have had a different rom that was pre-rooted by its dev.
Are you catching what I'm saying? Flashing xboarders rom didn't "give you root" any more than CM7 "gave you root." Root is built in to those roms.
If you want to restore to an unrooted stock rom browse the threads in the development section. There are a couple of stock nandroid backups posted that you can restore via clockworkmod recovery and then you'll have a stock unrooted rom. You can even do that and still have clockworkmod recovery in case you want to flash a different rom to your phone again.
And PLEASE remember when flashing from one rom to a different rom, WIPE WIPE WIPE data, cache, dalvik cache, then flash rom, then fix permissions, then reboot. This will save you SO MANY headaches.
G2X CM7
I learned something new Thanks for the info. And yes, this last time when I installed, I wiped and formatted just about everything I could possibly do, including fix permissions..seemed to do the trick.
beast6228 said:
I learned something new Thanks for the info. And yes, this last time when I installed, I wiped and formatted just about everything I could possibly do, including fix permissions..seemed to do the trick.
Click to expand...
Click to collapse
Sweet! If you're simply updating to a newer version of the same rom you can probably get away with just wiping cache and dalvik cache and then flashing. Its just when you switch to a totally different rom that you need to do a full wipe. Gives you a clean slate to start with.
G2X CM7
I'm curious about one thing though. What would I accomplish by using Nandroid and flashing a bin? I see there is a BIN_LGP999AT-01-V10f-310-260-MAR-27-2011+0.zip file that is available for this phone, although I have no clue on how to install Nandroid. Anyways, wouldn't flashing a BIN be the ultimate way to restore the G2X?
Nvflashed to stock for an recent RMA. All good. RMA done. Happy camper.
To avoid going thru the whole ADB process to root (yeah, I'm lazy) used the Razorclaw one-click method on my B40 TF. Went well. Added CWM. Flashed Roach's Prime 2.1.1 and C-B's OC. All good. (fist-bumps all around!)
Saw all my previous nandroid backups on my uSD. Before backlight on tab died had some nice display tweaks I sure would like back.
So...question is this. If I were to Restore one of the old nandroids my TF would, essentially be as it was at that point? All my tweaks, root, Solarno CWM, etc? Or would I be an Unhappy Camper?
I think I know the answer but many here know more than I so...whaddya all think?
Hey guys, ok so I am coming from two HTC Heros (CMDA Sprint)
Was running cyanogenmod on both (me and the wife) loved it.
Now that I have the E4GT, I went ahead last week and used ODIN to install LoStKernel.
Now it did give me root and I have used apps like rom toolbox and setcpu.
My main problem is it seems these samsung devices are a lot trickier to tinker with.
Basically I am looking to get Clockworkmod so I can flash roms and make nandroid backups.
From what I have read, I need a kernel that supports and/or has CWM in it.
I tried flashing CWM with rom manager, and it installed - but I have no option to backup/restore I can only flash a zip or clear cache.
There are SO MANY things posted in the development section and I do not know which kernels are the latest, best etc.
I need:
a) CWM/busybox
b) overclocking support
c) FULL stock functionality (no loss of wifi or something stupid like that)
From what I am understanding the kernel is included with a rom. But I can't flash a rom without CWM. So I am rooted but stuck with stock rom and it's kernel.
Confused, lol!
Can someone point me to a proper thread to get me CWM and a well supported ROM to install? Can I get CWM working fully on the stock kernel/rom?
If someone can point me to the right direction, maybe I can find a developer to donate to lol!
No love?
At this point I'm just trying to get cwm. Seems I may have already had it just didn't know it came with lostkernel and now I botched it using rom manager.
Sent from my SPH-D710 using XDA App
You can actually flash a new kernel with CWM in odin
Thats the easiest method
There are several, as for the best I dont know yet
Im still tinkering with my setup
I guess that's my main issue - I can't find one that has CWM, everything I am seeing is a ROM that needs CWM to install.
If I had CWM I'd be all set because then I can backup my setup and try new things without worry, but I don't want to use ODIN to try a kernel that CWM won't take, or isn't there, and then lose what I have ya know?
All set, seems I flashed a kernel that wasn't what it was supposed to be. I apparently flashed his earlier version (pre-LoStKernel) that did not have CWM5 it it.
Just used ODIN last night to drop in LoStKernel and kept root, but also have CWM5 now. After clearing my SD Card, made my first backup. 1.5GB, jesus! lol. Nearly my whole SD card... yes, it's from my old Hero, so, time to get a 32GB.
Hi everyone, I had a problem with my previous nexus s (I have since gotten a working replacement) and I was wondering where exactly I messed up so in the future I can avoid this
Here is what I did on my previous phone:
1. I flashed ics onto my device from the ota update package from androidcentral, it was 4.0.3. (This worked great and I had it on my phone for 2-3 months before I tried the next steps.)
2. I rooted my device successfully using the guide at nexusshacks.
3. I also flashed TWRP recovery (fastboot) and superuser using the above guide/links
4. When I would turn off my phone it would boot to a screen with a red triangle and an opened android bot. So what I would have to do is flash twrp recovery everytime I turned the phone on just to get it to work.
5. What I wanted to do was keep the stock rom but still have twrp recovery without it making me reflash it on every boot. So I clicked install and tried to flash the stock rom (update package from the link in step 1) with twrp recovery. It then turned off my phone and hard bricked it. I couldn't turn it on anymore and a new battery didn't fix it.
I was able to get a replacement now and I was just wondering at which step did I go wrong? I THINK that I should have wiped my cache before I tried to reflash the stock rom but maybe I'm way off base here. This is why I posted a question here so hopefully some of you guys can help.
I did think about posting in another thread, but I didn't wanna threadjack or anything... and his problem also seemed a bit different then mine. Also, sorry about not being able to provide the specific links it won't let me post them until I've posted 8 times.
I don't know for sure but team win recovery has been reported to corrupt the device's efs directory. I've even had problems myself using clockwork recovery. I've moved on to razor recovery and haven't looked back.
This is the most flash-friendly phone I've ever owned, and razor recovery rivals amon ra (which was awesome on my g1 and evo). I really think it may have just been the recovery you were using... Somebody correct me if i'm wrong.
Sent from my Nexus S 4G using Tapatalk
I had once corrupted one of the partition. I fixed to by flashing stock recovery and stock rom.
Use adam outler's unbrickable mod tool. It can be found in android development section.
Sent from my Nexus S using XDA
Thanks for the replies.
That's interesting about twrp... I didn't know that. Truth be told, the only reason I went for it over other ones like clockwork mod was because the UI looked pretty nice and easy to use. Also the guide I followed at nexusshacks used that, so I wanted to stay consistent with it.
jishnu7, it's a little late for that now however as I actually have already received a working replacement from my carrier, but in the future if something ever does go wrong (hopefully not) I will definitely check that out.
The main thing I'm wondering is if it messed up because I tried to reflash the stock rom essentially over top itself (was hoping that by doing that, it would stop making me reflash twrp on every reboot) or if it was because I didn't wipe the cache before the flash.
Also, what I really wanted to do with my phone was to keep the stock rom but be able to overclock my cpu/gpu. I was hoping I could set different overclocks for different things (I've heard of kernels where you can downclock your phone when the screens off and have it overclocked slightly while you're using it, that would be something I'd like to have). I figured to install those kernels I would have to root my phone, replace stock recovery and install superuser so that's why I tried to do that. Once again, I'm pretty new to all this stuff for my phone.
Sorry to bump this thread again, but I would really like to know how I could avoid what happened to me for the future. I think it's because I flashed the stock 4.0.3 rom over itself (was hoping that by doing that twrp recovery would stay on the phone after reboot).
What I would like to do is install something like CM9 or AOKP and use the Matr1x kernel so I could undervolt or overclock my phone.
I seriously dont get how u hard bricked your phone...
the reason you are thinking is you reflashed stock rom without wiping cache, as per my experiece its not at all the reason
now, whats my experience??
...I have some fault with my nexus device and I'm working on it,,and I did everything I could do...one of the thing out of those things was reflashing stock rom without wiping,and i did it quite a several times...my device never hard bricked,,however it was soft bricked for many times,,and i recovered from it
so reflasing a stock rom over stock rom, over ICS, over some themed custom rom,will not hard brick your device, you must be missing something none of your steps sounds suspecious
P.S:- pulling out battey while flashing something like this sounds suspecious, never tried though
I'm not sure what happened either to be quite honest with you. Since giving it another shot now with my new fresh phone I have had great success!
I did everything I wanted to do all in one go. Rooted it, install CWM touch, install AOKP (went with milestone 4 cuz I heard newest build 29 has some bugs) + gapps and installed matr1x kernel 18.5 bfs.
The only thing I did different from last time was installing CWM touch (instead of twrp) and flashed aokp this time (instead of reflashing 4.0.3 over itself).
I would just avoid step 2 at all cost.
The nexus s hacks dude is a tool.