i already searching in this Sub Forum. but i can't found it.
any body can help me? please teach me how to install ClockWorkMod on my 3D
thank you
Root the device, install rom manager from market, start rom manager and press install clockworkmod. Done.
Sent from my LG-P920 using Tapatalk
blackpitbull said:
Root the device, install rom manager from market, start rom manager and press install clockworkmod. Done.
Sent from my LG-P920 using Tapatalk
Click to expand...
Click to collapse
after press install clockworkmod, go to reboot. after reboot, my phone bootloop. what happen?
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General
mohicanrat said:
after press install clockworkmod, go to reboot. after reboot, my phone bootloop. what happen?
Click to expand...
Click to collapse
I guess someone set you up the bomb.
But seriously, have you tried booting into recovery (turn off phone, wait untill completely off, press volume down+power for about 10 seconds untill LG logo appears) and clearing your cache and dalvik cache?
Worked Great!
Bioweb - Thanks for being so smart and share your wisdom. I was only missing the detail on how to access recovery (low vol + power).
Related
Hi,
I just flashed myns warm 2.2 on my evo 4. Now I want to install hulu and a few other addons. The developer says to install them like you install roms, so should I just use ROM Manager? If so do I have to backup and wipe my phone first?
Thanks for the help,
LiamLC
LiamLC said:
Hi,
I just flashed myns warm 2.2 on my evo 4. Now I want to install hulu and a few other addons. The developer says to install them like you install roms, so should I just use ROM Manager? If so do I have to backup and wipe my phone first?
Thanks for the help,
LiamLC
Click to expand...
Click to collapse
pretty sure he meant you need to flash them from recovery and not use rom manager, as it doesnt actually install anything.
t3project said:
pretty sure he meant you need to flash them from recovery and not use rom manager, as it doesnt actually install anything.
Click to expand...
Click to collapse
Ok thanks for clearing that up. Sorry for the newbie question, but how do you do that?
**edit
actually i just found i guide about how to do it on phandroid, my question is this:
Here is what the guides says:
RECOVERY
PUT ROM ON SDCARD
Before you begin, connect your device using the Mirco USB cable and place the Custom ROM you downloaded onto the Root of your SDCard. This means put the Zip file in the main folder itself. Not in any Sub-Folders of any sort.
STEP 1: TURN OFF DEVICE
Power down the device by holding the Power Button for 2 seconds. Allow it to shutdown completely. Wait about 10 seconds before next step.
STEP 2: BOOTLOADER
Hold down VOL DOWN + POWER until device boots into a White Screen.
Move to RECOVERY by using the VOL DOWN toggle and select by using POWER button.
STEP 3: BACKUP
Make sure to do a NAND backup of your bevice prior to Flashing a ROM. Refer to Section 3.
STEP 4: WIPE
Use the VOL DOWN toggle to move to Wipe and select by pressing the POWER button.
Toggle down to Wipe date factory reset and select by pressing the POWER button.
Once that has complete, toggle down to Wipe Dalvik-cache and select by pressing the POWER button.
Once that has complete, select Return.
STEP 5: FLASH ZIP
Use the VOL DOWN toggle to move to Flash zip from sd card.
Find the ZIP file Custom ROM you want to flash by using the VOL DOWN toggle. Select it using the POWER button.
Your ROM will now be installed onto your device.
STEP 6: BACK TO RECOVERY
After the installation has completed, you will be brought back main menu, use the POWER button to select the first option “reboot system now”. And your device will reboot itself like normal.
Enjoy your new ROM!
Click to expand...
Click to collapse
My question is do I have to do step 4?
LiamLC said:
Ok thanks for clearing that up. Sorry for the newbie question, but how do you do that?
**edit
actually i just found i guide about how to do it on phandroid, my question is this:
Here is what the guides says:
My question is do I have to do step 4?
Click to expand...
Click to collapse
yes if you are going to a different rom
t3project said:
yes if you are going to a different rom
Click to expand...
Click to collapse
no im not going to a different rom, im keeping myns, i just want to install hulu and the transparent bar thing.
I have rooted my cell using z4 root (permanent root) but I have some issues and questions..
1)i can't get to the recovery screen by pressing the button (vol +) + (power) + (home)..when I press these buttons I got downloading screen..how to got recovery boot by pressing theses buttons..?
2)when I root into recovery using Rom Manager I don't get nand backup options..how to get that option..?
PLEASE GUYS HELP ME OUT..
hadi_xman said:
I have rooted my cell using z4 root (permanent root) but I have some issues and questions..
1)i can't get to the recovery screen by pressing the button (vol +) + (power) + (home)..when I press these buttons I got downloading screen..how to got recovery boot by pressing theses buttons..?
2)when I root into recovery using Rom Manager I don't get nand backup options..how to get that option..?
PLEASE GUYS HELP ME OUT..
Click to expand...
Click to collapse
For 1) it is vol + & - both..
Sent from my GT-I5800 using Tapatalk
hadi_xman said:
I have rooted my cell using z4 root (permanent root) but I have some issues and questions..
1)i can't get to the recovery screen by pressing the button (vol +) + (power) + (home)..when I press these buttons I got downloading screen..how to got recovery boot by pressing theses buttons..?
2)when I root into recovery using Rom Manager I don't get nand backup options..how to get that option..?
PLEASE GUYS HELP ME OUT..
Click to expand...
Click to collapse
First off, your question should be in the General Section.
For CWM Recovery, you'll need the installer provided by the porter of CWM for G3.
And like the post above me says, to get into Recovery, it's Power+Volume Up+Volume Down+Home.
Sent from my GT-I5801 using Tapatalk
ron_gangte said:
First off, your question should be in the General Section.
For CWM Recovery, you'll need the installer provided by the porter of CWM for G3.
And like the post above me says, to get into Recovery, it's Power+Volume Up+Volume Down+Home.
Sent from my GT-I5801 using Tapatalk
Click to expand...
Click to collapse
from where i can get tht installer...
and if i install custom rom thn will i have CWM by default..?
hadi_xman said:
from where i can get tht installer...
and if i install custom rom thn will i have CWM by default..?
Click to expand...
Click to collapse
pm mumbozer for the installer.. it s not publicly out..
yes, it wld b DEFAULT after u implent it..
i need link and complete guide how to install it as i am noob..
hadi_xman said:
i need link and complete guide how to install it as i am noob..
Click to expand...
Click to collapse
Just get d package, then extract it.. Connect ur phone to pc with usb debugging on.. Run the installer bat.. Thats all..
Sent from my GT-I5800 using Tapatalk
Well as it says I have root rom manager says version 5.5 or whatever is installed yet no matter how I try to boot to recovery I see no cwm? Am I missing something?
Sent from my SAMSUNG-SGH-I727 using XDA App
Did you just say you installed CWM Recovery with ROM manager?
Did you try
Push and hold Vol down plus power button til you see words at top left corner
Immediately push Vol up within about 5 sec to get into recovery.
or you could use "Transformer reboot to recovery" app from market.
If you don't see CWM recovery do you see stock recovery?
baseballfanz said:
Did you just say you installed CWM Recovery with ROM manager?
Did you try
Push and hold Vol down plus power button til you see words at top left corner
Immediately push Vol up within about 5 sec to get into recovery.
or you could use "Transformer reboot to recovery" app from market.
If you don't see CWM recovery do you see stock recovery?
Click to expand...
Click to collapse
For the love of GOD, if you used ROM Manager to flash CWM, you most likely have version 5.5.0.4... DO NOT USE IT!!!!
Refer to this thread: http://forum.xda-developers.com/showthread.php?t=1530337
Use Recovery Installer found here: http://forum.xda-developers.com/showthread.php?t=1346180
That will install a usable version of CWM and save you a LOT of hassle.
Thanks for the help guys. Ill hit the thanks button on both of y'all since I used both . Worked perfect
Sent from my SAMSUNG-SGH-I727 using XDA App
So did you install cwm with ROM manager? If you did, so a normal reboot to sew what happened.
I did install it through ROM manager first but it never would boot to recovery. I tried booting through ROM manager and all it would do is reboot, so then I downloaded a app to recovery boot still just rebooted thats when i posted the question and yall answered. Hope this answered you question for me
Sent from my Transformer TF101 using XDA
stepheng said:
I did install it through ROM manager first but it never would boot to recovery. I tried booting through ROM manager and all it would do is reboot, so then I downloaded a app to recovery boot still just rebooted thats when i posted the question and yall answered. Hope this answered you question for me
Sent from my Transformer TF101 using XDA
Click to expand...
Click to collapse
Reason I asked was a lot of peoples have problems with CWM after flashing through ROM Manager. If it's working for you that's good.
No it didn't I ended up flashing the one that the other guy posted the installer for and it worked
Sent from my Transformer TF101 using XDA
Hi,
I just installed ClockWork Mod 6.0, and cleared all the date/cache and wiped the Dalvik Cache and installed Cyanmod Mod 10 and the google files.
I clicked reboot and just keep getting a bootloop, how can I get out of it?
I have S-OFF and on HBOOT 1.27 - Thanks!
(Please give me clear instructions, Im a little new to this)
Jazper321 said:
Hi,
I just installed ClockWork Mod 6.0, and cleared all the date/cache and wiped the Dalvik Cache and installed Cyanmod Mod 10 and the google files.
I clicked reboot and just keep getting a bootloop, how can I get out of it?
I have S-OFF and on HBOOT 1.27 - Thanks!
(Please give me clear instructions, Im a little new to this)
Click to expand...
Click to collapse
Remove battery... Reinsert it.. Then hold vol down + power together.. You'll go to bootloader.. Then using volume up/down go to recovery and use power button to select it
Once you entered recovery.. Do full wipe ( factory reset + cache + dalvik wipe)
Then flash cm10 and gaaps again
Sent from my HTC Sensation using xda premium
ganeshp said:
Remove battery... Reinsert it.. Then hold vol down + power together.. You'll go to bootloader.. Then using volume up/down go to recovery and use power button to select it
Once you entered recovery.. Do full wipe ( factory reset + cache + dalvik wipe)
Then flash cm10 and gaaps again
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
Thanks that worked, i did that process 2 times before and now it works? Weird.
Anyway, I'm having another problem, I can't select what network I want, it's picked 02-UK but I want GiffGaff... it just says error. Any fix around this? Many thanks.
Jazper321 said:
Thanks that worked, i did that process 2 times before and now it works? Weird.
Anyway, I'm having another problem, I can't select what network I want, it's picked 02-UK but I want GiffGaff... it just says error. Any fix around this? Many thanks.
Click to expand...
Click to collapse
You should probably check in the cm10 thread.. Someone might have posted a solution for mannually selecting network
And for thanks.. There is a thank button for that
Sent from my HTC Sensation using xda premium
cwm-based recovery v5.5.0.4 loop
Hello I have a problem with my galaxy s plus phone . I tried installing CM10.1M2-I9001 but after doing all the steps in http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001 link I am stuck into boot loop that goes only into the cwm-based recovery and can't load any further. Can you please help me with that .
exelliel said:
Hello I have a problem with my galaxy s plus phone . I tried installing CM10.1M2-I9001 but after doing all the steps in http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001 link I am stuck into boot loop that goes only into the cwm-based recovery and can't load any further. Can you please help me with that .
Click to expand...
Click to collapse
it would be better to ask this in galaxy S plus forums
this is only for sensation/XE4G
The same is happening with me but it didnt work out yet
ganeshp said:
You should probably check in the cm10 thread.. Someone might have posted a solution for mannually selecting network
And for thanks.. There is a thank button for that
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
I wanted to get Kit cat and went into recovery using mobile uncle tools....
now whenever i press power button it doesn't let me switch on my device instead enters cwm recovery
what should i do...
My phone is samsung galaxy core i8262
vigsbrox23 said:
I wanted to get Kit cat and went into recovery using mobile uncle tools....
now whenever i press power button it doesn't let me switch on my device instead enters cwm recovery
what should i do...
My phone is samsung galaxy core i8262
Click to expand...
Click to collapse
Wrong forum bro.....this is for HTC Sensation....
Hi,
I am trying to flash my LG P500 to Cyanogen Mod 9 and the manual I found stated, that I should partition my SD card using Clockwork mod.
So I found ROM Recovery app in Google Play and installed it. Afterwords I downloaded Clockwork Flash using ROM Mangager app and everything seems OK.
But when I try to boot to clockwork mod, my phone is always being flashed into factory default.
I power off the phone, press vol down, home and power on buttons - the phone starts up, an animation of white box and android logo beside shows (with a progressbar at the bottom) - I think this is because of installed clockwork - then I release those 3 buttons I was holding, but the phone simply resets itself into factory default.
I also tried to hold those buttons all the way, until some "DOS-like" screen shows up, but the phone keeps rebooting itself.
The next thing I tried was to boot into recovery using ROM manager app, but it also did not work - I don't know, if it should boot into recovery by itself or I should press those 3buttons (vol down, home, power on/off)
Could you help me, what am I doing wrong?
thanks
It sounds like your phone is not rooted. Follow the sticky topics in this section for how to root your phone. Start with this one:
http://forum.xda-developers.com/showthread.php?t=2047589
Once you have root, install clockworkmod again. Then, you'll have success.
mrcorey said:
It sounds like your phone is not rooted. Follow the sticky topics in this section for how to root your phone. Start with this one:
http://forum.xda-developers.com/showthread.php?t=2047589
Once you have root, install clockworkmod again. Then, you'll have success.
Click to expand...
Click to collapse
no, my phone is already rooted
That's the stock recovery, that means ClockworkMod Recovery did not flash properly. See if you granted SuperUser rights to ROM manager, and check the SuperUser app if you had mistakenly checked 'Remember Choice'.
Sent from my LG-P500 using Tapatalk 2
Dont use Rom Manager.
You dont have recovery installed.
Find some other way to flash recovery.. there are many in this forum.
I suggest you use Rom Manager to download CWM and then boot into cwm .
I suggest http://forum.xda-developers.com/showthread.php?t=1827723
This is safe for installing custom recovery.
Thanks to Shinobisoft.
Use AmonRA recovery. Works flawlessly for all roms in this forum.
bleritaezo said:
I suggest you use Rom Manager to download CWM and then boot into cwm .
Click to expand...
Click to collapse
Your suggesting something that might make your phone unusable,This is not the way to get your 10 posts! Please do some research before suggesting something.