Related
Hey guys,
yesterday i flashed my g1 with JF RC33 and alls fine, except by one thing: every time i turned it on, a message pop up telling that android.process.media needed to be close.
Then I did a wipe, but after this i can't turn on my phone again, it stay on the flashing android screen
What should i do?
Thanks!
it seems to be caused by a broken system file or hardware problem. could you try flashing your system again? this update.zip is signed, so something must happened during the copying process.
Simply reflash an update. I recommend you do a Nandroid backup next time. Also, make sure your SD card is in your phone when turning on. For some odd reasons, when my SD card isn't in my phone, it just hangs on the boot image. Very strange. I have Apps to SD and am running on Haykuro 5.0.2H
it looks to be an issue with your sd card, do you have apps to SD enabled or anything else with your phone that might need to access the SD card at boot? if you have apps tp SD then you need to re-push the mountd.conf and the init.rc and redo the links to your /system/sd partition. if not i would make sure that your SD card is not corrupt by formatting it again. as solomenwishing(sp) said next time you should make a nandroid backup of your phone before you mess with anything
Thanks guy.
I flash everything again and it's ok.
Now i don't know how to make the nandroid backup.
Can someone help me?
Search is your best friend here....
http://forum.xda-developers.com/showthread.php?t=459830
Well this is a sticky on this forum
okay, i had already read this before, but the only thing that i don't know for sure is this.
"Android G1 phone in recovery mode with busybox installed, including appropriate symlinks to at least tar and md5sum, as well as 'adb shell' support running as root."
My recovery image is from the JF topic "How -to- Root,Hack and flashing...."..the only thing i know is my one has the adbshell support running as root
It's ok to do this?
TKS GUYS
I tried searching for help, but can to a dead end. After I installed JF 1.5 and the phone rebooted, it just hangs on the G1 Tmobile boot screen.... I can restart it and load into recovery but get E: cant mount dev/block/.. I also tried the DREAIMG.NBH but when ever I try to load it (Power+Camera) I get "No Image Found!"... I dont know if it cant find the recovery_testkeys or if it was screwed up during the installation process... It does boot so im guessing no brick.
Any help is GREATLY appreciated
*EDIT*: SOLVED, I downloaded the DREAIMG-29.img, renamed the file with a .nbh extension, and bought a SD READER to MAC 4gig San Disk Card. IT ENDED UP BEING THE NEW CARD and READER THAT MADE IT POSSIBLE!
http://koushikdutta.blurryfox.com/G1/DREAIMG-RC29.zip (Rename DREAIMG.NBH..
Hope this helps this pesky problem
maybe
It might be that it's not reading the sdcard right to read image to reflash. But also some people have been saying some apps are causing it not to go past the g1 screen seem the most common factor is desktop theme apps are doing this people have been able to remove these apps useing umbuntu to remove these apps and all goes back to normal.
Hmm.. umbuntu has never been a real good friend to me.. but yea the SD card was my last possible indication. I thought that after doing a factor reset under recovery deleted the apps...? Is there a way to just reflash to stock rc 33 or rcc 29? Im sort of new to the Android Dev scene... Could the Recover_Testkeys.img image be causing an issue also?
Thanks
Edit: Iv heard that the type of SD card might be an issue (Transend, San Disc, ect.)? ..... I dont know though.
deleted comment... accidental duplicate post
Try a wipe. I had the same thing happen to me only i did something dumb, but once i flashed it, it worked again.
It happened to me today, It stayed on the Android screen for about 30 minutes So I removed the battery and turned it on with home+power button,
did a wipe, and applied the update again.
I dunno if doing the wipe helped but it works now
By wipe you mean recovery then (Alt+W).. Iv done it about 10 times. I keep getting the "cant mount SDCARD" and "dev/block/mmcblk0" after attempting to install update.zip.
Any other thoughts..? thanx
please tell me you have adb set up. if so i can try to help you otherwise i can't do much for you
Tubaking182, To be honest, i dont know for sure if I did set up adb... Could you please explain what it is and if it is still possible to set it up? If you could help me, It would be GREATLY appreciated... im about to give up.... such a pain in the a**
Bump.. for help issues
they may have changed the vold.conf in order to support A2SD, but that would prevent the phone from recognizing SD cards that are not partitioned.
I was rooting my HTC Magic 32A and had the same problem when I choose [Flash zip from sdcard] at RA-hero-v1.6.2
The message was "cant mount /dev/block/mmcblk0"
Then I choose [Other > Move recovery.log to SD] at RA-hero-v1.6.2
And went back to choose [Flash zip from sdgard] and then it works.
sorry guys but i made an "uh oh" and need help please! i had Virtuous Unity 1.31.0 & was attempting to flash the beta version. i had blue magic theme on my rom as well. Here are the exact steps i took: downloaded rom, put phone in clockwork recovery, wiped dalvik, wiped cache, wiped data, mounted system, flashed the zip & rebooted. Now i'm looped in the "blue magic" boot animation. what'd i do wrong & can it be fixed. i backed everything up too. i can get it into HBOOT screen by pressing power & down on volume key but am not able to scroll to any of the options. after a cple seconds it automatically selects HBOOT & asks if i want to install update from sd? i assume it's the gingrbread update but i've selected "no" every time so i could talk to someone first. right noe i'm on a publis cpu & it won't allow me to access the phone internals. i need admin passcode. i haven't messed much with playing with my phone thru a cpu so i'm not quite sure i'm even doing it right. sorry for my cpu lack of knowledge but i've adapted to android pretty well. Help please & thank u in advance
problem is that you have a PD98IMG.zip file on your sdcard....
pull the sdcard, boot into HBOOT, select recovery, then pop in the sdcard when you get to recovery
Pirateghost said:
problem is that you have a PD98IMG.zip file on your sdcard....
pull the sdcard, boot into HBOOT, select recovery, then pop in the sdcard when you get to recovery
Click to expand...
Click to collapse
Yup. If you happen to have a PD98IMG.zip on your SD, bootloader will try to flash it everytime and you won't be able to access Recovery. Either pull the SD card until after you've selected Recovery like pirateghost suggested, or find a card reader/other device to read your card to delete PD98IMG.zip
Ok sweet. That got me back to clockwork, slipped the card back in once in recovery, clicked reboot and it still looped. It did say I had that file so I'm guessing I have to find a card reader and delete the file maually now or did I do something wrong?
Thanks so much for ur reply and it looks like I'm going to have to find a card reader and do it manually cuz it still loops. Thank u so much!
Just go in recovery rewipe and flash the beta rom only no themes yet let it reboot it should load right up I think the theme messed you up the bata rom is based I'm 2.3.4 so 2.3.3 themes wont work
sent from my unity loaded inspire 4G
Ok, did all that but Noticed before I rebooted that at the bottom where it shows the processes it's going thru, it says installation aborted. Says E:Can't open/Sd card/ download etc...2.33.0 BETA.zip....(bad). Do I still reboot or attempt to flash again?
Try going into mounts option in recovery and mount the external sd card.
Not giving option to mount. Only unmount so I guess I unmount and try to remount?
Try that and see if it works.
Aborted again. I'm getting worried friend
Still aborted. I'm getting worried friend
Don't worry. It will work out fine. Let me check something and I will reply momentarily.
Thank u so much for helping. I'm wishing I could pay u at this point
Don't worry. Turn off phone. Check to make sure sd card is properly inserted. Power phone back up and boot into recovery. Select install zip and see if you are able to view your files.
Well I can go to install the zip but still aborts
Try going to backup and restore and select restore. Select the backup you said you made and try restoring to your backup. You may have a bad download of the beta rom. Let me know if you can restore. Wipe first.
What happens If I scroll down to that PD98IMG.zip u were talkin bout. I see it on the zip file list...
You don't want to use that. That type of file can only be used in Hboot. It seems like you can see what is on your sd card so it is mounted. The rom file you were trying to flash may be corrupted. Unless you can get another rom on your sd card I would say restore to your backup until you can get another rom on your card and also delete that PD98IMG file.
if it says corrupted that means that your ROM file is corrupted or didnt fully downloaded.
1.Turn Off Phone
2.Take out SD Card
3.Vol+Power to Hboot
4.You will be at recovery mode.
5.Insert Sd Card back in
6.go to Mount
7.Mount your SD CARD(make sure USB is plugged in the computer)
8.Wait a little, your computer will have pop-up, if not go to My computer and click on your Sd Card.
9.Drag in a new fully downloaded rom into it.
10.Unmount the Sd Card
11.Happy Flashing!
sorry if this does not work, tried my best to help. This worked on me, so It should work for you as well.
another method is, if you got a Card Reader(micro chip goes in side a big chip) then put your ROM in their and delete the PD19 blah file, and skip steps 6 to 10
Hi,
I´m Brazilian (sorry for English mistakes). I really need some help. My message will be long, because i´ve read a lot, and tryed a lot of things. Please, if you can, help me. . "Yes, i saw the video!"
When I turn on my Nexus S, It is freezing in GOOGLE SCREEN.
I have read a lot in the web about this problem and try a lot of things, but i cant fix it.
My first test is go to another ROM, I´v tried CyanogenMod and MIUI, but i cant change my ROM.
I´m using a rooted phone "LOCK STATE - UNLOCK", with ClockworkMod Recovery v3.0.2.4.
Nexus S works in the FASTBOOT MODE, and goes OK to RECOVERY MODE.
If I try to acces the SDCARD (Mount, Format, wipe), i received a fail message.
In a google forum, someboy teach that we have to WARM the cell, and if i warm it (in a coffe machine), we can access the sdcard.
When it warmed, i try to FORMAT the SDCARD in a lot of ways (by Cellphone, By windows - Fast Format, using a Panassonic software). The SDCARD works, show the OK format Messages, and when i turn it off, and turn it on, all files are there (They went back, after format).
When I try to install MIUI, Miui doesn´t work, but the cell go to "normal ROM". when it was warm, it works (with a lot of fail messages), when it was warm, it wasnt work.
Thanks for help
so you can connect your phone to your computer en put things on the sd card , but when you try to install a rom, it won't work.. correct? so can you boot up your phone ? because i'm a little confused with the hot and stuff.. try wipe cash and wipe data/factory reset before installing a rom , maybe that will do the trick..
android1991 said:
so you can connect your phone to your computer en put things on the sd card , but when you try to install a rom, it won't work.. correct? so can you boot up your phone ? because i'm a little confused with the hot and stuff.. try wipe cash and wipe data/factory reset before installing a rom , maybe that will do the trick..
Click to expand...
Click to collapse
I can connect my phone to my computer (usb).
I can use ADB, and FASTBOOT DOS commands.
I can put things in my SDCARD (when it´s warm), i can delete my old files in my SDCARD. But when i reboot the phone, my new files (roms, normal files) are not there, and my old files that i deleted are there. So, it´s complete insane. when i format the sdcard, the old files come back after i´ve deleted. :-(
I would update your recovery to the new 5.0.1.0 to start. You can do that with fastboot. The older 3.x recoveries had issues with SD cards mounting.
You can also download the factory image files from the development section and use fastboot to return to stock. Try that and let us know what happens
"The hot and stuff".
When the cell phone is HOT (warm), i can access the sdcard.
When it´s in the normal temperature (30ºC , 86ºF), the SDCARD doesnt mount, and nothing works.
If i can turn off the sdcard and use just the normal memory, i think i can use the phone.
Nexus One users can fiz this problem taking the edcard off.
We dont have Samsung warranty at Brazil. :-(
I´ll update my recovery. Thanks. I´ll do it at night, because my coffe machine is not here. lol. Do you have another idea? Does anybody have idea what´s going on about that "warm problem"?
NYYFan325 said:
I would update your recovery to the new 5.0.1.0 to start. You can do that with fastboot. The older 3.x recoveries had issues with SD cards mounting.
You can also download the factory image files from the development section and use fastboot to return to stock. Try that and let us know what happens
Click to expand...
Click to collapse
i´ve updated it to v5.0.2.0.
i´ve tried toupdate my rom to the last miui, but it doesnt work.
the cell show me the message:
e: Cant open /sdcard/update.zip (bad)
When you are in the recovery did you click on "install zip from sdcard" and then browse to the correct .zip OR did you just click on the option that says "install update.zip?
NYYFan325 said:
When you are in the recovery did you click on "install zip from sdcard" and then browse to the correct .zip OR did you just click on the option that says "install update.zip?
Click to expand...
Click to collapse
both. and it show me those message.
the recovery works. why? the sdcard no. i cant update the rom... why????
could i disable the sdcard and use just the phone memory? i think my sdcard is broke.
vprotazio said:
could i disable the sdcard and use just the phone memory? i think my sdcard is broke.
Click to expand...
Click to collapse
Today i´tried to remove the cd card. i open the nexus s, and i saw that i cant do anything.
the sdcard is not removable, it´s fixed in the motherboard, so, i cried and still have a broke phone. could anyone help me? do you have some idea? i tried to g to samsung at brazil, they said that they cant help, there is no warranty, and i´m by myself.
In your recovery console there's an option that says mounts and storage. Try mounting each of /data, /system, /sdcard, and /cache.
Post any errors you get, exactly as they appear.
Don't be too upset, there's a lot of things we and try before we call it broken. Went through a crisis a lot like yours about a month ago, and trust me when I say that there's a good three days of things we can try
Hey man I here ya on the crisis. But remember you got a Nexus S, these are almost unbrickable. I would recommend finding the ODIN how to here on xda and giving that a shot.
Sent from my Nexus S using xda premium
hey guys and girls, hopefully you can help me out.
I'm using a t-mobile galaxy S, trying to flash a new rom after I rooted it. I followed the instructions, and I have CWM able to load. when I got into select the install from the SD card, I'm able to select the file (trying bionix frost), it tries to load it, but then comes back telling me 'Can't mount /sdcard' and any subsquent attempts to even browse for the install zip give me the same error. I can boot the phone into the rooted stock image, access anything on the SD card there fine, copy files to it, etc, but CWM will not install the ROM's or keep the /sdcard mounted.
anyone here run into this issue? I'm using CwM Voodoo lagfix Recovery 3.0.2.8x
It's been awhile since I flashed that ROM...
Did you change the mounts manually? Does the OP say to change mounts? Back then we had to change the mounts ourselves in CWM to UMMU.
I'm at work and just sending a quick reply..check the OP to see what your mounts should be
to clarify a bit, this isn't just on a specific ROM, this is for ANY rom I try, after I access any ZIP file through CWM, it unmounts the SD Card and won't let me get back to it unless I reboot, and the cycle repeats.
Ok. Sorry I can't help you with that. I'm still kinda new.
I'm sure you'll get the help you need soon especially with your last reply.
Good luck and sorry I couldn't be of help.
I'm backing up and will format my SD card to see if this is the problem, saw this fixed a couple of errors like this for other peeps.
So since I couldn't get CWM to install the rom, I used ODIN and flashed to gingerbread. that's installed and working (had it fail the first time, but the 2nd installed and was up inside 10 minutes)