Database Info

Need to Re-Root TF? Install CWM

Hey All,
I posted a question the other day that nobody got to... no worries.
I have obtained a full root. I have SU and have root apps running like TiBu, SetCPU and others and they work fine. I have root, I just can't get CWM.
I used this link at first to get both root and CWM. Like I said... root worked fine, CWM not so much. I have tried several times following those same steps to flash the cwm again and again but I only end up with an Android with an exclamation point.
I also tried a second computer running the same steps -- same results.
What I'm wondering now -- Can I use this other guide and instead of following the full guide, I skip to the CWM part. I should not have any problems with that, correct? The first part is getting temp root and the last part is full root. I already have full root, so can I skip to the CWM?
Or does anyone else have ideas?
Thank you!

I'm not that knowledgable about all of this stuff, I tried that method last night to try to root my phone and like others get stuck at the point where its dl the volds. I think this method was built for hc 3.0 and 3.01.
It won't hurt to give it a try though.
I just wish i could get root. To me this thing is a nightmare to hack. I managed to get my atrix rooted with cwm, unlocked with a custom rom, and this tab is tougher for me to crack.
Best of luck to you.
Sent from my Transformer TF101 using XDA Premium App

[Q] Updating while rooted

I have seen a few posts in regards to people asking about updating from a rooted device but I never seen the answer I been looking for.
Example: I rooted my Motorola XOOM Tablet, Android 3.2 by following these instructions: http://forum.xda-developers.com/showthread.php?t=1170760
"[GUIDE][US WIFI & 3G] How To Root Your Xoom From 3.2 Stock [PC & Mac]" posted by jase33
IF say for example version 3.3 comes out.. IF I want to upgrade to version 3.3 from my rooted 3.2, Am I able to click upgrade when it announces it? While rooted and unlocked?
I am not using custom ROMS. I just followed those steps provided in the link above.
Do I have to restore to faculty settings, re-lock, then upgrade, then repeat the same process to root all over again? or can I just click upgrade.
Other posts started talking about having custom ROMs, and there wasn't a defendant answer that I saw that was reassuring to my question.
Thanks for your Help

So far ive not had little success updating using the built in update feature, when 3.2 came out I tried updating but it crapped out when booting, so I had to delete the user data, loosing all my apps in the process. But this is based only on the update from 3.1 to 3.2 both stock roms. P.s. i used the same instructions u did on an AU Xoom.
D

dayyanj said:
So far ive not had little success updating using the built in update feature, when 3.2 came out I tried updating but it crapped out when booting, so I had to delete the user data, loosing all my apps in the process. But this is based only on the update from 3.1 to 3.2 both stock roms. P.s. i used the same instructions u did on an AU Xoom.
D
Click to expand...
Click to collapse
If your Xoom is unlocked but also not rooted/completely stock, you can get OTA updates. If rooted, even stock rom/kernel, you don't get or can't install updates. But if rooted, never fear, our developers, including the Tiamat team have made the updates available to us super fast.
Anyway, you never need to re-lock unless you plan to return the Xoom under warranty, for repair or replacement.

no offense but it sounds like you don't know much bout this sort of stuff...you believe that you are not using custom rom but are not sure?? You need to read up and figure out the basics...if you are using custom rom..absolutely do not accept an over the air update. Read up on what you are doing unless you want a600 dollar paperweight

I am actually more than 100% sure I am not using a custom ROM..
I never downloaded any custom ROMs to be honest that’s how I know.
The only thing I wasn’t sure of at first was the ADB commands but when I was rooting for the first time. But after I read the tutorials it was as easy as riding a bike. As for the small Linux commands used in the shell, from the tutorial that I followed, seemed pretty super basic. I had been using Linux for 6 years, recompiling kernels etc so I don’t have any doubts...
I am not too worried about bricking anything… My question was only related to the OTA updates with the rooted stocked. That’s all.
Thank you everyone for your responses, they answered my question. And thanks for the concerned about my device.

How to update to Jelly Bean?

Before anybody says to use the search function, I've been looking through the general topics non-stop for one that applies to my situation, and either it slipped through the cracks (likely) or it doesn't exist (not likely).
Basically, my tablet is rooted and unlocked, and I'm on ICS; the first one that had face unlock in it. I'd really like to update my tab to JB, but I need to be pointed toward directions for updating a rooted and unlocked tab. But on top of that, I also need recent instructions, because I know that earlier attempts at getting this thing updated have resulted in lots of bricked tabs.
If anybody could tell me if it's possible to update my tablet to JB right now, I'd appreciate it, and if someone has figured out how to do it, can you please point me toward that thread? I'd really appreciate it.
-Tim

I'm in the same configuration, custom-ics-rom with twrp recovery on unlocked device.
I believe the first thing to do is enabling NVFLASH, that will make things safer also in the worst cases.
I did that and now hopefully I have an unbrickable device.
I'm a bit confused on how to go forward, I know that there are two versions of twrp, maybe I should install the JB version, booting inside it and then flash the downloaded JB update from ASUS site, or use the twrp for ICS for flashing and after that install the JB version ?
Anyone knows what is the correct option ?
Giuseppe
Tim 13 said:
Before anybody says to use the search function, I've been looking through the general topics non-stop for one that applies to my situation, and either it slipped through the cracks (likely) or it doesn't exist (not likely).
Basically, my tablet is rooted and unlocked, and I'm on ICS; the first one that had face unlock in it. I'd really like to update my tab to JB, but I need to be pointed toward directions for updating a rooted and unlocked tab. But on top of that, I also need recent instructions, because I know that earlier attempts at getting this thing updated have resulted in lots of bricked tabs.
If anybody could tell me if it's possible to update my tablet to JB right now, I'd appreciate it, and if someone has figured out how to do it, can you please point me toward that thread? I'd really appreciate it.
-Tim
Click to expand...
Click to collapse

Keep ICS, as JB will cause much trouble especially if you are rooted, trying to OC and is generally slowein my opinion

I prefer to try it anyway, tomorrow I will try flashing, after all if something will go wrong I should be able to recover with nvflash.
[
QUOTE=grimsonfart;32974661]Keep ICS, as JB will cause much trouble especially if you are rooted, trying to OC and is generally slowein my opinion[/QUOTE]

Thank you, Grim. That's disappointing to hear about JB, but if you think that my current build is better than that (which makes sense considering I've seen at least one thread about downgrading from JB to ICS), then I will keep my tab on ICS for now, and thank you for your input, I appreciate it.
-Tim

If you have twrp recovery, can't you download the jb ROM from the Asus site for your region and flash it in? I'm unlocked and that's how I upgraded one version of jb to another, but my ICS to jb was ota, so in your case I can't speak from experience. There is a full upgrade, and root guide in the general section.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app

I just managed to do what you re looking to achieve.
I m pretty noob so it tok me a whole day to figure it out.
So first download jb update on asus website (pick the right one for ur type of tf300)
Flash it through adb
At that point i got jb installation working but bootloop
So i flashed jb version of twrp (adb)
I then went in recovery and flashed clean rom 2.5 which worked flawlessly
Just for the fun i did factory reset afetrwards and stock jb eventually launched right
Sent from my ASUS Transformer Pad TF300T using xda app-developers app

gst0098 said:
I'm in the same configuration, custom-ics-rom with twrp recovery on unlocked device.
I believe the first thing to do is enabling NVFLASH, that will make things safer also in the worst cases.
I did that and now hopefully I have an unbrickable device.
I'm a bit confused on how to go forward, I know that there are two versions of twrp, maybe I should install the JB version, booting inside it and then flash the downloaded JB update from ASUS site, or use the twrp for ICS for flashing and after that install the JB version ?
Anyone knows what is the correct option ?
Giuseppe
Click to expand...
Click to collapse
I successfully installed jb following the guide on this site, the only thing that was not working was the flashing of the stock rom, neither given options worked (fastboot flash recovery or fastboot flash system) , I discovered that our eepad has a partition nmed staging used for firmware installs. I then flashed with
fastboot flash staging blolb
and all went good.
Btw I find the JB better than ics, more responsive and smoother, and also if it is not yet overcooked.

[Q] MrRobinson root method on a brand new phone?

I have a brand new stock verizon S3 and am wondering if I can use the MrRobinson root method to root for the very first time. I swear someone in one of the forums said they did but it sounds like most people are using those images to just update. I originally tried this 4.1.1/4.1.2 method and it bricked my phone on flashing the VRALEC bootchain step, everything looked good in odin, the phone looked like it tried to restart, then went black and never came back. I got a new phone and am wary of trying the same method again. If that is the method I have to use any thoughts on what could have went wrong?
I appreciate any input.

There should be no problem using the Mr. Robinson file in Odin. I have flashed the bootchain that soft bricked your phone and had no issue. Your following the Odin instructions exactly, right....just checking. Everything needs to be installed using the PDA slot unless it specifically says to put the file somewhere else....I have not run into that yet. You had problems with Odin before so that makes me a little apprehensive advising you to use it again.
The Mr. Robinson 4.1.2 file is not the ota. Use the 4.1.1 ota file so you can grab the 4.1.2 ota. Before installing 4.1.2 ota install ota voodoo rootkeeper....temp unroot, take ota then reroot. Pretty sure that's the only way other than flashing the bootchain that will get you on stock rooted 4.1.2

Ryno77 said:
There should be no problem using the Mr. Robinson file in Odin. I have flashed the bootchain that soft bricked your phone and had no issue. Your following the Odin instructions exactly, right....just checking. Everything needs to be installed using the PDA slot unless it specifically says to put the file somewhere else....I have not run into that yet. You had problems with Odin before so that makes me a little apprehensive advising you to use it again.
The Mr. Robinson 4.1.2 file is not the ota. Use the 4.1.1 ota file so you can grab the 4.1.2 ota. Before installing 4.1.2 ota install ota voodoo rootkeeper....temp unroot, take ota then reroot. Pretty sure that's the only way other than flashing the bootchain that will get you on stock rooted 4.1.2
Click to expand...
Click to collapse
I actually had the video demo they have linked open and was watching that then pausing and following the directions and making sure everything I was doing was identical. I really have no idea what happened, I've read over the directions a few times watched the video again and I can't see anything I may have missed. But it hard bricked my phone, I couldn't turn it on or get back into download mode or anything.
If I can just use the MrRobinson method on a brand new unrooted phone I will do that. I think the phone was already on 4.1.2 when I got it, so that won't matter using the 4.1.1 ota file? I've been flashing roms and toying around with my Incredible 2 since the day I got it basically and have never had any problems. Now that I had this issue with the S3 i'm scared to try anything . It seems the S3 has a good community though which is the main reason I went with it over my other options.

I would be scared to use Odin if I had your experience too. I've used Odin several times without any issue but I have not used it since the 4.1.2 update....although I'm sure many have without any problems. Yes, you can flash any OTA via Odin even if your going backwards . I can't say you won't have any issues because I don't think you should have had an issue the first time.......maybe wait to see what others think?

Clyde Tacoma said:
I actually had the video demo they have linked open and was watching that then pausing and following the directions and making sure everything I was doing was identical. I really have no idea what happened, I've read over the directions a few times watched the video again and I can't see anything I may have missed. But it hard bricked my phone, I couldn't turn it on or get back into download mode or anything.
If I can just use the MrRobinson method on a brand new unrooted phone I will do that. I think the phone was already on 4.1.2 when I got it, so that won't matter using the 4.1.1 ota file? I've been flashing roms and toying around with my Incredible 2 since the day I got it basically and have never had any problems. Now that I had this issue with the S3 i'm scared to try anything . It seems the S3 has a good community though which is the main reason I went with it over my other options.
Click to expand...
Click to collapse
idk why that happened. My best guess is if the battery was low prior to you using Odin then it may have needed charging. But that VRALEC/Odin method is proven working countless times and those files linked in the OP have been used countless times.
Just know that with mrRobinson's pre-rooted images, you'll still need to unlock your bootloader with say EZ Unlock v1.2 (available on Rootzwiki so google it) before you decide to flash custom roms/kernels.
Ryno77 said:
I would be scared to use Odin if I had your experience too. I've used Odin several times without any issue but I have not used it since the 4.1.2 update....although I'm sure many have without any problems. Yes, you can flash any OTA via Odin even if your going backwards . I can't say you won't have any issues because I don't think you should have had an issue the first time.......maybe wait to see what others think?
Click to expand...
Click to collapse
Like I said above, may have been the luck of the draw or it could have needed charging.

Clyde Tacoma said:
I actually had the video demo they have linked open and was watching that then pausing and following the directions and making sure everything I was doing was identical. I really have no idea what happened, I've read over the directions a few times watched the video again and I can't see anything I may have missed. But it hard bricked my phone, I couldn't turn it on or get back into download mode or anything.
If I can just use the MrRobinson method on a brand new unrooted phone I will do that. I think the phone was already on 4.1.2 when I got it, so that won't matter using the 4.1.1 ota file? I've been flashing roms and toying around with my Incredible 2 since the day I got it basically and have never had any problems. Now that I had this issue with the S3 i'm scared to try anything . It seems the S3 has a good community though which is the main reason I went with it over my other options.
Click to expand...
Click to collapse
If you want to have a 4.1.2 rooted stock version, you need to download MrRobinson, K3 full wipe image with root (http://www.androidfilehost.com/?fid=9390214368362234355), unzip it first, then use Odin to flash this, then install Voodoo OTA root keeper from the market to preserve root, then let OTA update back to 4.1.2, finally use OTA root keeper to restore root. Done, simple and risk free.

You guys rock thank you!

As a followup for anyone that may stumble upon this thread in the future, I used the method provided by buhohitor and it worked like a champ. I flashed the mrRobinson image used ez unlocker to unlock the bootloader then used ez recovery to flash the latest version of TWRP. I'm now running this Paranoid Android 4.2.2 Rom and it is fantastic!

[Q] Rooting non-us device mz604

I'm looking to root my xoom device after realising I won't be getting any more updates after ics 4.0.4. I've read a lot of threads but they seem to be for us devices only. The more I read the more confused i'm getting. My device is mz604 wifi ics4.0.4. I'm in Ireland so its eu version. Im looking to root and try out custom roms. Would prefer twrp recovery but cwm would sufice if it needs to be that way. I've done a backup of all my data but the more i read the more threads conflict cause they are old enough. Just looking to put a bit of life back into my device. Any help would be greatly appreciated.
Thanks

root
lawlor059 said:
I'm looking to root my xoom device after realising I won't be getting any more updates after ics 4.0.4. I've read a lot of threads but they seem to be for us devices only. The more I read the more confused i'm getting. My device is mz604 wifi ics4.0.4. I'm in Ireland so its eu version. Im looking to root and try out custom roms. Would prefer twrp recovery but cwm would sufice if it needs to be that way. I've done a backup of all my data but the more i read the more threads conflict cause they are old enough. Just looking to put a bit of life back into my device. Any help would be greatly appreciated.
Thanks
Click to expand...
Click to collapse
heres universal root method: http://forum.xda-developers.com/showthread.php?t=1242241&highlight=root
After rooting install twrp just like its written in this thread: http://forum.xda-developers.com/showthread.php?t=1782235
I hope you know how to install adb. If not look here :http://dottech.org/21534/how-to-install-adb-and-fastboot-on-your-windows-computer-for-use-with-your-android-phone/

rocky12345678900 said:
heres universal root method: http://forum.xda-developers.com/showthread.php?t=1242241&highlight=root
After rooting install twrp just like its written in this thread: http://forum.xda-developers.com/showthread.php?t=1782235
I hope you know how to install adb. If not look here :http://dottech.org/21534/how-to-install-adb-and-fastboot-on-your-windows-computer-for-use-with-your-android-phone/
Click to expand...
Click to collapse
Going to try it later. Thanks very much for the reply. Will post how I got on.

Success
Finally got round to doing it and it went as soothly as possible. I changed over to twrp but to use goo manager but it says no compatible roms. Any ideas as i've found a lot of sites recomment it for the xoom but just cant get it to work with mine.
Thanks