I have seen a few posts in regards to people asking about updating from a rooted device but I never seen the answer I been looking for.
Example: I rooted my Motorola XOOM Tablet, Android 3.2 by following these instructions: http://forum.xda-developers.com/showthread.php?t=1170760
"[GUIDE][US WIFI & 3G] How To Root Your Xoom From 3.2 Stock [PC & Mac]" posted by jase33
IF say for example version 3.3 comes out.. IF I want to upgrade to version 3.3 from my rooted 3.2, Am I able to click upgrade when it announces it? While rooted and unlocked?
I am not using custom ROMS. I just followed those steps provided in the link above.
Do I have to restore to faculty settings, re-lock, then upgrade, then repeat the same process to root all over again? or can I just click upgrade.
Other posts started talking about having custom ROMs, and there wasn't a defendant answer that I saw that was reassuring to my question.
Thanks for your Help
So far ive not had little success updating using the built in update feature, when 3.2 came out I tried updating but it crapped out when booting, so I had to delete the user data, loosing all my apps in the process. But this is based only on the update from 3.1 to 3.2 both stock roms. P.s. i used the same instructions u did on an AU Xoom.
D
dayyanj said:
So far ive not had little success updating using the built in update feature, when 3.2 came out I tried updating but it crapped out when booting, so I had to delete the user data, loosing all my apps in the process. But this is based only on the update from 3.1 to 3.2 both stock roms. P.s. i used the same instructions u did on an AU Xoom.
D
Click to expand...
Click to collapse
If your Xoom is unlocked but also not rooted/completely stock, you can get OTA updates. If rooted, even stock rom/kernel, you don't get or can't install updates. But if rooted, never fear, our developers, including the Tiamat team have made the updates available to us super fast.
Anyway, you never need to re-lock unless you plan to return the Xoom under warranty, for repair or replacement.
no offense but it sounds like you don't know much bout this sort of stuff...you believe that you are not using custom rom but are not sure?? You need to read up and figure out the basics...if you are using custom rom..absolutely do not accept an over the air update. Read up on what you are doing unless you want a600 dollar paperweight
I am actually more than 100% sure I am not using a custom ROM..
I never downloaded any custom ROMs to be honest that’s how I know.
The only thing I wasn’t sure of at first was the ADB commands but when I was rooting for the first time. But after I read the tutorials it was as easy as riding a bike. As for the small Linux commands used in the shell, from the tutorial that I followed, seemed pretty super basic. I had been using Linux for 6 years, recompiling kernels etc so I don’t have any doubts...
I am not too worried about bricking anything… My question was only related to the OTA updates with the rooted stocked. That’s all.
Thank you everyone for your responses, they answered my question. And thanks for the concerned about my device.
Related
I've spent some time on the forum trying to find an answer, but obviously that didnt happen.
I have my GS4G and want to just ROOT it without installing any rom to replace the firmware.
1. If i root my phone, can i do JUST that? or are there other steps after simply rooting that are considered important for the stability of my phone?
2. After i root my phone, will i still be able to do the kiesmini/OTA gingerbread *official* (not leaked) update?
My main reason for wanting to do this is for the bloatware and increasing performance, and to just have overall more 'control' (similar to the feeling of wiping a new computer from the manufacture's preloaded poop).
I have superoneclick v1.9.5. I used it as a test on my old MT3G, and installed the GingerYoshi rom, and all worked very well. I just dont want to brick my GS4G, as i paid full price D:.
sorry if this has been asked/answered, i try to play by the rules, but just didnt find my answer.
thanks,
Greg
Super one click root 1.7 was what I used. It just roots the phone, as any other rooting method should. You can get ota fine...I always did. Never had a problem.
Sent from my SGH-T959V using XDA Premium App
Just so you know there's no one-click root method for Gingerbread for the SGS4G yet. Maybe around the time the official ROM comes out there will be.
what does:
"error:more than one device"
mean?? That pops up when i hit root. I only have one phone connected to my PC.
I'm assuming its multiple instances of ADB running? Im not sure..
*EDIT* My mistake lol. still had my MT3G plugged in, my bad!
successfully rooted. Thanks
I have stock TW_epad-8.6.5.9-20110816. I noticed a couple of ways to root older versions.
How about my rom version? Which way to go to root my TF?
I have the same issue, I had it rooted when it was 8.6.5.6 but when I did the upgrade and tried to reroot it with the instructions from http://forum.xda-developers.com/showthread.php?t=1125714, the same instructions I used the first time, with the new boot image provided and followed all the same instructions, yet for some reason it is not rooting this time.
may i ask which updated version are you on? is it 8.6.5.9tw? and what happened to the TF after you cannot root it this time
also very curious to know if it's my firmware. I also have 8.6.5.9 20110816
I've tried countless rooting and trying to install cwm and flashing roms... I literally kept running into walls. So after some less doing and more reading, I am suspecting it might have something to do with my device itself.
Also, I read that it might be related to the fact I have the newer TF, B70K?
if anyone can confirm or relate, that'd be much appreciated
thanks
Earbuddy said:
also very curious to know if it's my firmware. I also have 8.6.5.9 20110816
I've tried countless rooting and trying to install cwm and flashing roms... I literally kept running into walls. So after some less doing and more reading, I am suspecting it might have something to do with my device itself.
Also, I read that it might be related to the fact I have the newer TF, B70K?
if anyone can confirm or relate, that'd be much appreciated
thanks
Click to expand...
Click to collapse
I successfully rooted my recently updated Tranformer using this method: http://www.todaytablet.com/step-by-...omb-3-2-root-with-one-click-for-windows-user/
I actually rooted my device with the same procedure. I learned about 8.6.5.9 20110816 twenty minuts later (doh!). This removed root of course. I re-rooted it using the same instructions and image I burned. Rooted once again.
Sucessfuly rooted and installed CWM and custom ROM
Guys,
yesterday i received my transformer from germany, DE build 8.5.6.9 version. I managed to root it with this method
Here is the link
http://forum.xda-developers.com/show....php?t=1125714
after i installed modded CWM and Gunfabios ROM...Everything works like a charm
Cheers
I have a B60 transformer with 3.2.1 HTK75_US_epad-8.6.5.13 on it.
From the reading I have done I should be able to use the 7.1 universal root kit.
My questions are
Where can I get the stock ROM to unroot it and set back to stock if I need to?
Other than updating CWM after using the root kit is there anything else I need to do.
I have rooted my EVO 4g phone and swapped out the rom many times so I'm hoping it is a lot like that but I'm new to this and just do not want to make any mistakes. I have tried to search and read as much as I can but there is tons of info on the forum and lots of it does not match or is very old.
Sorry if this is a newbee questions but I have to learn somewhere.
If you have links please post them and I will read that info.
Thanks
Brandon
ASUS has the stock roms on their website, but the 8.6.5.13 probably isn't available yet as a full rom, just an OTA. There are older versions available, such as 8.6.5.9, but I'm not sure if you can flash to an older version with the built in updater. Once the full rom is released, chances are better you can update back to stock. With nvflash and your B60, you can flash anything you want.
I haven't tried it, but I think that that root tool will let you back up before you flash.
gee one said:
I haven't tried it, but I think that that root tool will let you back up before you flash.
Click to expand...
Click to collapse
Yes, it will ask you if you want to backup before you root but it tells you it could take 4 to 5 hours.
I have rooted and unrooted with this below method many times. I don't need to go looking for a stock rom...it simply reverses the procedure as far as I know...look into it...now if you go for a custom rom your on your own.
http://forum.xda-developers.com/showthread.php?t=1198303
Thank you everyone for your answers, I did the full backup which did not take long as I had done a reset before I started and wiped everything.
The root was painless and is done.
For now I think I will stay with the stock ROM but I'm now going to look for a Kernel to OC it to 1.2-1.4 if I can.
Thanks again
Brandon
Hi guys,
I've searched everywhere and can't get a definitive answer on this so here goes -
I'm a noob when it comes to Android, having recently defected from being an Apple Disciple (I got hacked off with iTunes and bored in general with the Daycare Centre which is iOS) and have recently acquired an Acer A700 tablet.
I have installed the JB update OTA and everything is working fine and am chomping at the bit to get it booted, but most of the posts I have read regarding unlocking the bootloader and rooting it relate to ICS.
My questions are -
Does the bootloader process apply regardless of Firmware? (Are there different versions for different Firmwares)
Can anyone point me in the direction of a decent tutorial on how to do this?
What happens regarding a future update? Do I have to revert back to stock and update from there or can i jump from one ROM to another? (I'm assuming that I can't use the OTA updates any more)
Sorry for the long OP and thanks in advance for your answers.
ianrobbie said:
Hi guys,
I've searched everywhere and can't get a definitive answer on this so here goes -
I'm a noob when it comes to Android, having recently defected from being an Apple Disciple (I got hacked off with iTunes and bored in general with the Daycare Centre which is iOS) and have recently acquired an Acer A700 tablet.
I have installed the JB update OTA and everything is working fine and am chomping at the bit to get it booted, but most of the posts I have read regarding unlocking the bootloader and rooting it relate to ICS.
My questions are -
Does the bootloader process apply regardless of Firmware? (Are there different versions for different Firmwares)
Can anyone point me in the direction of a decent tutorial on how to do this?
What happens regarding a future update? Do I have to revert back to stock and update from there or can i jump from one ROM to another? (I'm assuming that I can't use the OTA updates any more)
Sorry for the long OP and thanks in advance for your answers.
Click to expand...
Click to collapse
No problem. Seeing you are on JB, then you have a JB bootloader.
You need to go here http://forum.xda-developers.com/showthread.php?t=1953917
And download Vorbeths easyroot2.0. It's for the 700.
You have to unlock your bootloader first, which shouldn't be an issue for you. Easy instructions for that.
Then download his package to a folder on your PC. (not sure, but you may have to download each file individually) Open a command window (shift & right mouse click) and type in whatever his instructions say. Should be painless.
Make sure USB Debugging is turned on first in your tablet (Settings/Developer Options/USB Debugging), and make sure you have the Acer Drivers installed on your PC.
Then connect, wait 30 seconds, and run his batch file.
You should be ok.
MD
Oh yes, one more thing, once you unlock your bootloader, chances are you will not be able to get OTA. And the only way to re-lock the bootloader is to install a stock rom.
Thanks!
Thanks for the reply. I am now the owner of a fully rooted A700!
Had a few issues during unlocking the bootloader. That thing timeouts quick! Also, didn't realise you had to run the .bat file while the tablet was on the Bootloader USB protocol screen. I thought you had to wait until it booted fully into JB.
Anyway, took the plunge and thanks again for your help.
ianrobbie said:
Thanks for the reply. I am now the owner of a fully rooted A700!
Had a few issues during unlocking the bootloader. That thing timeouts quick! Also, didn't realise you had to run the .bat file while the tablet was on the Bootloader USB protocol screen. I thought you had to wait until it booted fully into JB.
Anyway, took the plunge and thanks again for your help.
Click to expand...
Click to collapse
No problem. I thought I mentioned it timed out in about 5 seconds These days I don't remember much
Yeah, I haven't looked at Vorbeth's script, so I don't know which screen he launches it from. With mine for the 701, you can be when the tab is running normal. No difference in the end result though
Happy Hunting!
MD
One last question - do I have to install Clockwork Recovery for re-flashing the stock images or is it just a case of renaming it update. zip and putting it on an SD Card? Any chance you can point me in the right direction of the most recent/stable build? Is it easy to install?
Thanks again.
Sent from my GT-I9305 using xda app-developers app
ianrobbie said:
One last question - do I have to install Clockwork Recovery for re-flashing the stock images or is it just a case of renaming it update. zip and putting it on an SD Card? Any chance you can point me in the right direction of the most recent/stable build? Is it easy to install?
Thanks again.
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Well, this is a trouble spot.
If you wish to install a custom rom, then you will need to install CWM. The most recent version.
If you want to try your luck at installing a stock rom, my opinion, is to leave the stock recovery inplace. I haven't had luck in installing stock update.zips, as Acer has made them very specific. So I can't be much help to you in that.
However, you can always flash back to CWM or a stock JB recovery pretty easy. Personally, unless you plan on flashing a custom, I would just leave the stock recovery.
MD
Sometimes "leaked" update appear here in the forums. They are unofficial. And you never know if they improve things, or make things worse. So be careful.
Moscow Desire said:
Well, this is a trouble spot.
If you wish to install a custom rom, then you will need to install CWM. The most recent version.
If you want to try your luck at installing a stock rom, my opinion, is to leave the stock recovery inplace. I haven't had luck in installing stock update.zips, as Acer has made them very specific. So I can't be much help to you in that.
However, you can always flash back to CWM or a stock JB recovery pretty easy. Personally, unless you plan on flashing a custom, I would just leave the stock recovery.
MD
Sometimes "leaked" update appear here in the forums. They are unofficial. And you never know if they improve things, or make things worse. So be careful.
Click to expand...
Click to collapse
So, just for future reference, how would I go about re-flashing the stock image? I'm assuming it's saved on the tablet in a separate partition?
I've decided to stick with the stock rooted ROM but would like to know how to re-flash for when Key Lime Pie and future updates are released.
And, seeing as how you haven't steered me wrong so far, I though I'd pick your brains one last time.
Hope you don't mind!
Hi everyone
First off I would like to thank everyone who contributes on this board, I have been lurking for quite awhile even though I dont have any android devices, the reading is very interesting.
I have just got my first android device today delivered from BH Photo (I am in Australia) and have charged and powered it up. I have been reading on the forums about rooting and then unlocking. The android version appears to be 4.0.3 (ICS).
My questions are these:
Should I root this device and unlock the bootloader with ICS, then install TWRP and make a backup of it. Once this is done then update to JB? The firmware of the tablet is (I think this is right) IM74K:US_epad_9.4.5.26-20120720 and the kernel is 2.6.39.4 [email protected] #1
or
Update the device to JB then root it, but Im a bit confused with the unlocking part here what program is used to unlock the bootloader? Is it the Asus one? Also with rooting programs which one is more commonly used for both ICS and JB? Can I apply a manual update of JB using the Ausrtalian version instead of the US one.
Sorry for all the noob questions. I have read the index and after reading it still had some questions.
Thank you for your time
deathwalker01 said:
Hi everyone
First off I would like to thank everyone who contributes on this board, I have been lurking for quite awhile even though I dont have any android devices, the reading is very interesting.
I have just got my first android device today delivered from BH Photo (I am in Australia) and have charged and powered it up. I have been reading on the forums about rooting and then unlocking. The android version appears to be 4.0.3 (ICS).
My questions are these:
Should I root this device and unlock the bootloader with ICS, then install TWRP and make a backup of it. Once this is done then update to JB? The firmware of the tablet is (I think this is right) IM74K:US_epad_9.4.5.26-20120720 and the kernel is 2.6.39.4 [email protected] #1
or
Update the device to JB then root it, but Im a bit confused with the unlocking part here what program is used to unlock the bootloader? Is it the Asus one? Also with rooting programs which one is more commonly used for both ICS and JB? Can I apply a manual update of JB using the Ausrtalian version instead of the US one.
Sorry for all the noob questions. I have read the index and after reading it still had some questions.
Thank you for your time
Click to expand...
Click to collapse
Welcome to the Community!
There are a few on-going threads regarding this same topic. You might want to read those and make sure you understand the lingo/jargon being used (like: fastboot, bootloader, Recovery, adb. etc) as well as what it's for before you start your hacking.
Some things to keep in mind
Currently to have Root access in JB, you need to get root in ICS then use OTA Keeper to maintain Root for JB update.
The Bootloader unlocker tool is from ASUS and needs to communicate with ASUS servers for it to unlock.
Unlocking the bootloader will void your warrenty. Make sure you have a good device before you do it.
You have a version of tablet (9.4.5.26) that is able to use NVFlash that can help recover your tablet during a soft brick.
You should use an update that is appropriate for your device. If it comes with US, stay with US. Installing an update for a different region might not cause problems but there is no guarantee. Best to avoid the possibility by staying with the region it comes with.
For some reading material, I think that my blog post might help give you some additional details. However, I highly suggest that it be used for research only until you are aware of exactly what you are trying to accomplish. Remember to ask questions if things are confusing or if you are wondering what needs to be done next. 'Tis better to ask and be delayed than to be over-eager and bricked.
Hope this helps you during your first steps of XDA Android hacking!
I just got my TF700 last week and I wanted cleanrom on it and this is the order of stuff I did:
1. Unlocked bootloader
2. Nvflash setup
3. Installed TWRP
4. Flashed official Asus update
5. I lost TWRP so I installed it again
6. Flashed cleanrom
Probably not the most efficient way, but it was easy to do and didn't take too long.
hong90 said:
I just got my TF700 last week and I wanted cleanrom on it and this is the order of stuff I did:
1. Unlocked bootloader
2. Nvflash setup
3. Installed TWRP
4. Flashed official Asus update
5. I lost TWRP so I installed it again
6. Flashed cleanrom
Probably not the most efficient way, but it was easy to do and didn't take too long.
Click to expand...
Click to collapse
It's the most efficient way.
I have nothing to add except for the remark that NvFlash is key -- GET IT WHILE YOU STILL CAN!
I'm not even kidding here. It gives you 100% flexibility in doing whatever you wish (up- as well as downgrading, even the bootloader!) and provides a key benefit in recovering your device when that whale-sized piece of excrement hits the large ventilator running at top speed.
Thanks to everyone that has replied to my post. I have successfully rooted the tablet and unlocked the bootloader. Before I do anything else Im going to run NVflash and back it up. I have a quick question though. I have download NVFlash to my computer and extracted it. Do I need to copy it across to the tablet and then enter fastboot? I havent got an extenal sd card will it save the images to the tablet's hard drive?
Cheers
Deathwalker
i followed this video:
https://www.youtube.com/watch?v=J3ypzUaKxvo&feature=youtube_gdata_player
i watched it before i actually did it once or twice to make sure i know what to do. you don't need an external sd card. following the fastboot steps will pull the files that you need onto the internal one in a folder
Last night I used NVFlash to make backup of the tablet. A big thank you to alienedd as I followed his blog and also the guide from androidmobi team and managed to get the img files done. Is there anyway to test bar for wiping the tablet?
Now all I have left to do is install OTA RootKeeper and TWRP, back up the existing tablet and then flash a custom ROM (Im thinking cleanrom)
You don't need OTA Rootkeeper anymore because you have unlocked you're bootloader. And custom roms like Cleanrom are already pre-rooted so after flashing the cleanrom you will have root anyway.