Database Info

What to do??

I tried flashing Dutty's new rom released April 8th but it kept saying corrupted ROM image. I already upgraded to his previously released ROM. Well i tried a few times and kept saying corrupted ROM image, and i was stuck at the different color bar screen.
So next I tried flashing HardSPL, and that completed and worked fine.
Now after that i was able to get the ATT boot screen with the
R 1.58.16.27
G 25.61.30.03H
D 3.14.00.00
And thats where im stuck, computer no longer connects to Tilt? what do i do? how do i fix it?

go into boot loader mode. Hold down the camera button, and power on at the same time. Then try to reflash it.

I always delete the partnership with my computer and reestablish it after flashing or changing something major. Also manually going into boot-loader bypasses that relationship with the computer. Works for me but can't say it will work for you, just my $2c....

Thank you
the bootload mode was camera, power and reset button.
Never had the problem before, but now its fixed=)

Mna, are you using Vista & the Standard Extraction program it comes with?
If the answer is yes, you didn't READ enough. Many people had this issue until using WINRAR to extract the files. This is all over that thread, BTW.

Can't get into bootloader

I am unable to get into boot loader mode.
I've pressed camera + power and reset as usual but it won't go into bootloader it just boots the phone up.
I managed to get into bootloader mode using a KaiserCustomRRU and then it picked up the new ROM from the SDCard but when i press power to flash the rom nothing happens.
I can still boot into windows mobile and the power button works when I press it there.
I only got this kaiser a day ago is it possible this is a new version or something?
Please help!

Harsesis said:
I am unable to get into boot loader mode.
I've pressed camera + power and reset as usual but it won't go into bootloader it just boots the phone up.
I managed to get into bootloader mode using a KaiserCustomRRU and then it picked up the new ROM from the SDCard but when i press power to flash the rom nothing happens.
I can still boot into windows mobile and the power button works when I press it there.
I only got this kaiser a day ago is it possible this is a new version or something?
Please help!
Click to expand...
Click to collapse
Are you fully pressing the Camera button, it has two levels, it must be presses in fully and help whilst you restart your phone with the stylus (or turn on if the phone is off).
Off Topic:
This makes a nice change, helping someone into bootloader, rather than someone stuck in it.
Dave

Yup I'm pressing it down super hard, I've had the kaiser since it came out so I know I'm doing it as usual. For some reason it isn't working this time.
I had lots of trouble flashing HardSPL aswell! Now this problem with entering boot loader. This is getting irritating .

Harsesis said:
Yup I'm pressing it down super hard, I've had the kaiser since it came out so I know I'm doing it as usual. For some reason it isn't working this time.
I had lots of trouble flashing HardSPL aswell! Now this problem with entering boot loader. This is getting irritating .
Click to expand...
Click to collapse
Does the Camera button work normally? I.e. Launches the camera in Windows.
What problems are you having with HardSPL?
Dave

Yup camera button does work normally.
I had to reset the device loads of times before customRUU noticed that the phone was plugged in.
At the moment I'm stuck in RUUNBH recovery mode in HardSPL. It detects that I have put a memory card with a KAISIMG.nbh into the phone, it says that it will flash radio, rom, splash and says press power to continue but when I press power nothing happens. Now no matter what I do I can't get out of HardSpl and I can't even flash a rom anymore

Harsesis said:
Yup camera button does work normally.
I had to reset the device loads of times before customRUU noticed that the phone was plugged in.
At the moment I'm stuck in RUUNBH recovery mode in HardSPL. It detects that I have put a memory card with a KAISIMG.nbh into the phone, it says that it will flash radio, rom, splash and says press power to continue but when I press power nothing happens. Now no matter what I do I can't get out of HardSpl and I can't even flash a rom anymore
Click to expand...
Click to collapse
Check the link in my sig for getting out of the bootloader...
Dave

Thanks so much
Ok so its booting up again but I'm still having the same problem, ie it won't get me into bootloader using camera and power button.
I can't even press the 2 buttons to clear storage either, it just boots straight into the rom.

Harsesis said:
Thanks so much
Ok so its booting up again but I'm still having the same problem, ie it won't get me into bootloader using camera and power button.
I can't even press the 2 buttons to clear storage either, it just boots straight into the rom.
Click to expand...
Click to collapse
Very strange...
Why do you need to access the Bootloader? To flash from SD Card?
Ta
Dave

Yup also I'm having weird problems which I think are associated with this particular problem.
When I boot up the rom lots of keys just randomly get pressed. e.g. if I have a pin set loads of characters will be put into the input box and the only way i can stop it is by pressing a hardware button.
I'm trying to flash a dutty rom which I know doesn't really have those kinda problems to see if its just the rom, although other people aren't reporting the same problem with the rom though :/

Harsesis said:
Yup also I'm having weird problems which I think are associated with this particular problem.
When I boot up the rom lots of keys just randomly get pressed. e.g. if I have a pin set loads of characters will be put into the input box and the only way i can stop it is by pressing a hardware button.
I'm trying to flash a dutty rom which I know doesn't really have those kinda problems to see if its just the rom, although other people aren't reporting the same problem with the rom though :/
Click to expand...
Click to collapse
Flash back to your Original ROM, Radio and SPL. If the problems are still occuring, take it back to the shop, IMO.
Dave

Know where I can find the original T-mobile splash?

Harsesis said:
Know where I can find the original T-mobile splash?
Click to expand...
Click to collapse
No Idea, try searching / asking in this thread: http://forum.xda-developers.com/showthread.php?t=335568
Ta
Dave

Reverted everything back to default now, still got the same problem so I'm going to get a replacement send out to me tomorrow.
Do you think there is a new version of the kaiser that messes up when you flash hardspl?

Harsesis said:
Reverted everything back to default now, still got the same problem so I'm going to get a replacement send out to me tomorrow.
Do you think there is a new version of the kaiser that messes up when you flash hardspl?
Click to expand...
Click to collapse
I doubt they gave you that newer Model what doesn't work.
I think it is the SPL that figures out wether or noot to boot the OS or run the Bootloader... when loading the OS the SPL checks for what keys are pressed and goes into the SPL or OS.
If Hard SPL and the OEM SPL fail to load the bootloader, there must be something wrong with the device IMO.
Ta
Dave

Harsesis said:
Yup also I'm having weird problems which I think are associated with this particular problem.
When I boot up the rom lots of keys just randomly get pressed. e.g. if I have a pin set loads of characters will be put into the input box and the only way i can stop it is by pressing a hardware button.
I'm trying to flash a dutty rom which I know doesn't really have those kinda problems to see if its just the rom, although other people aren't reporting the same problem with the rom though :/
Click to expand...
Click to collapse
I have the same problem with key press, it happened after a recent flash to a new rom.
I have found out what keys it is in my case. It is the "button 6" (voice recorder) and "edfc".The last are just endlessly pressed. Anybody knows how to fix this? My temporary fix was to remap button 6 to "rotate screen" but it is really anoying. I would like to just disable button 6, until I can return it, if there is no fix.
The problem has persisted over 3 roms now (PV rom (8 oct by medkid) - where it all started, Garmin 4.3 and now hyperdragon III 6 oct)
any help will be greatly welcomed!

Rom Flashing a Fuze

Ok you guys have talked me into atleast trying some roms before I abandon the fuze and go back to my 8525 and/or iphone.
Ive read through
http://forum.xda-developers.com/showthread.php?t=436053
and
http://forum.xda-developers.com/showthread.php?t=410150
Im not a noob when it comes to flashing Ive done it countless times on the 8525.
1st problem is I cant get HardSLP installed on the device. I navigate through all of the menus and when I get to the progress bar it sits for a min and pops an error saying device is not connected. This is after its allready seen the device, verified the batter charge, read which version is on the phone etc.
I'm on a vista machine if that matters although Ive never had an issue with the 8525.
Next, Ive read some people are having issues at going back to orginal everything for return purposes. Can anyone prove or disprove this?
and I think thats it for now.
Thanks in advanced

Uncheck Enable advanced network functionality under the USB to PC network connections section (settings, connections).
Thats what did it for me.. had the same problem.

I have it unchecked other wise it would not sync.

Flash via MicroSD. Safest and best way to flash.

AllTheWay said:
Flash via MicroSD. Safest and best way to flash.
Click to expand...
Click to collapse
Don't I need to get HardSLP installed first?

hondaguyjoe said:
Don't I need to get HardSLP installed first?
Click to expand...
Click to collapse
Try unplugging the USB cable and plug it into another port. If it's plugged into a front USB use a back one if you can.
Also try putting your phone into the bootloader (holding down volume down + reset hole)
See if you can flash it that way.
If that doesn't work. Delete the device driver from you PC and start over.

Stuck at AT&T screen after attempted ROM flash?

I installed HardSPL and checked to make sure it installed fine, ect. Then I went and downloaded this ROM.
http://forum.xda-developers.com/showthread.php?t=497699
I established an activesync connection and then installed the ROM, waited until it was 100% done and it reset itself. The next time it booted up, it stuck at the AT&T logo screen. I read somewhere to hard-reset when you get to the part where you configure the stylus... wanted to get back to a working phone, I hard-reset and formatted. When I reboot it still sticks at the AT&T screen, with the 3 colums of orange letters on the bottom.
Did I do something wrong, and what can I do?
Thanks.

get back to the tri-screen bootloader (hardspl, turn the phone on, volumedownkey+centerbutton+reset) , reflash the rom...

Is your phone cdma? If so, then, yeah, you did something wrong.

paperWastage said:
get back to the tri-screen bootloader (hardspl, turn the phone on, volumedownkey+centerbutton+reset) , reflash the rom...
Click to expand...
Click to collapse
The part where it says it will delete all information, ect. ect. and then it takes a few seconds and says restore complete VolUp to reboot?
I tried that and it yeilded the same results, and I just tried again now and it still sticks at the AT&T screen.
Farmer Ted said:
Is your phone cdma? If so, then, yeah, you did something wrong.
Click to expand...
Click to collapse
I should have specified, it's a GSM phone. The AT&T Fuze.
I also updated the OP with a working link, didn't realize it linked back to the ROM Development page. =/
Thanks for the suggestions though. I'm hoping I didn't do anything I'll regret, I can't afford to have an expensive paperweight right now.

go into bootloader (volume down and reset button) until u see the tri color screen. then connect the phone computer using ur usb cable and you should see something on the bottom of the screen that says "usb" now try flashing a ROM again.

flash the stock rom, then try reflashing the custom rom again!

Same thing happened to me with a Energy Rom so I just had to choose a different version of it and it worked

TP2 with EnergyROM problems!

I cannot activate my TP2 with EnergyROM. The data won't provision at all.
I cannot run the stock RUU either.
I took the phone to my good friend, and he hasnt been able to do anything with it either...
What am I doing wrong?
Everytime I try to put the stock rom back, I get a different error message.
Has anyone had this issue?

Does phone and sms work? What error do you get for the Data??
I have had problems provisioning data before and there were a couple solutions:
Data Call Failure Error 11 PPP Connection Error - Install stock ROM, call programming (#228 on verizon). If that doesn't work, call verizion and let them know you have no data. If all else fails ask for a DMU reset (although they are reluctant to do this).
What error message do you get when you try to install a stock ROM?

sorry, I have Sprint (shouldve mentioned that)
I get error #777 from data
and I got errors 206, 320, and another 200level one my boyfriend got when he tried. The latest time I tried with the stock rom it simply said "cannot upgrade your phone."
but yes, phone and sms work.

iamkaybo said:
sorry, I have Sprint (shouldve mentioned that)
I get error #777 from data
and I got errors 206, 320, and another 200level one my boyfriend got when he tried. The latest time I tried with the stock rom it simply said "cannot upgrade your phone."
but yes, phone and sms work.
Click to expand...
Click to collapse
Try cycling the battery and re-provisioning your phone first. If that doesn't work change your connection settings. I am not sure on sprint 3g login, but go here:
Start > settings > Connections > Connections
Then click Manage existing for the sprint data connection, click edit. Make sure the "Modem" is "Cellular line" and it is dialing "#777". The last screen should have your sprint 3g data info, if you cannot find it online, call sprint and they can give you that information.
About the ROMs, i'm not sure why it isn't working. Unless you are transposing those numbers wrong there is no info in the wiki at this time:
http://wiki.xda-developers.com/index.php?pagename=Elf_RUU_Error_Codes

I've tried that, my tech friend tried it. Nothing has worked.

iamkaybo said:
I've tried that, my tech friend tried it. Nothing has worked.
Click to expand...
Click to collapse
Did you call sprint yet? That might be the next plan of action, anytime none of those worked I called VZW and got it fixed.
If none of the above works you might have to flash you TP2 via the SD card. Extract the .nbh file and place it on the root of your SD card (do not put it in any folders). Take out your battery, put it back in, hold the volume down and power key. It should automatically load the ROM file and ask if you want to flash the ROM. Hit the power button and flash away.

I called sprint and none of the 3 different tech support agents could figure it out either.
I'll try the SD card thing, because that is looking like my last hope =\

iamkaybo said:
I called sprint and none of the 3 different tech support agents could figure it out either.
I'll try the SD card thing, because that is looking like my last hope =\
Click to expand...
Click to collapse
I had that once with VZW, flashing back to a stock ROM and provisioning is what solved it...hopefully that works for you. Do you need tips on flashing from the SD card or extracting the nbh?

have you tried task29 first, and then reflashing?

kal87 said:
have you tried task29 first, and then reflashing?
Click to expand...
Click to collapse
I agree. It sounds like some left over files are causing a serious conflict. Task 29 will format the phone and give you a clean slate to put the phone into bootloader mode and install a new rom. I have attached a version of Task 29 that I found on PPCGeeks that formats the entire phone and just puts the original "Touch Pro 2" splash screen. Plug in your phone and make sure you have a full sync connection with your phone. After that extract the zip file I attached to your desktop. Then run the Task29.exe file. Go through the whole process as if you were flashing a rom. After that the phone will only go to the splash screen and not boot. Do not panic, this is normal. You now have to put the phone in bootloader mode by holding the volume down button and hitting the soft reset button. Continue to hold down the volume down button when you release the soft reset and dont let it go until you see the bootloader screen. Make sure the phone is still plugged in and the words "USB" pop up on the bottom before you continue. When it does, flash the rom of your choice whether stock or custom and try to see if your problem continues. Sorry for the long instructions but I like being thorough just in case. I always use this before I flash a new rom just to avoid problems. I don't know who the author of this software is but they deserve a lot of credit. Hope this works out for you.

yea, i agree, PRBajista. i use it as well, everytime i flash a new rom (which i plan on doing in a minute or so) before i flash29, i put my new rom's nbh on my sd card, start up active sync, start up boot loader, it'll tell me to presst the power button to flash a new rom, which i don't i hit volume down, so it goes into usb mode, falshes with task 29, after it finishes, i reset holding volume down, and flash my rom from sd cause i prefer it over active sync. i hope everything works out for you

Do you have Hard SPL?

I tried task29 and got the Error [260] as i have the past 3 times i tried just doing the ROM by itself.
I've tried loading the .nbh file onto the SD and doing the whole volume down/power button thing and it just stayed on the bootscreen for 10 minutes not moving.
I am at my wits end and dont know what to do, and now the phone feature (calling/sms) has stopped working as well.