A copy and paste of the what I posted on the Fpse forum since I thought people here might be interested.
I have an Asus Transformer, and a wireless PS3 controller via Sixaxis Controller app
After fiddling with Fpse for a couple of hours, here is my impression:
Menus are very buggy:
Most settings have trouble saving - took me 3 try tries to get Country - Europe to save, other settings are hit and miss
Controller input settings never save - Every time I load Fpse I have to re-input the controller settings under "Hardware keys"
- Please fix this!!!!
Controls are OK:
Once the controls are mapped, they work pretty much as expected
No analog emulation for digital keys = I can't play ape escape with my wireless PS3 controller, bummer.
Definitely needs analog emulation for digital key presses
I might be able to find a work around for the analog with Sixaxis Controller app, not sure. Still getting used to the app
Audio - Sometime great, sometimes not so great
The audio appears tied into the frame rate - if Frameskip is on, it also appears to skip the audio, resulting in choppy audio
When games run at full frame rate, the audio is pretty good.
Games seem to work just fine
Games appear to be working just as they should, nothing spectacular, nothing bad, which is a very good thing.
Performance seems a little slow, but that could be the Transformer not having enough CPU power, or Fpse.
This post may not seem negative, but it is really not. Any problems I didn't experience means they are not there, which means a lot of things work great. It's hard to find things that are working correctly, because if they are working correctly, you should never notice they are there. I also know this is a relatively new app, and Android is a new operating system. It takes time to get things to work correctly.
I am very satisfied with Fpse. But getting the menu to save the controller settings and adding analog emulation would go a long way to making even more satisfied and telling more people about Fpse (hint, hint). A playstation emulator without a proper control setup kills the fun outright.
I installed CM7 nightly 25 for my SGSII and installed the sixasis app, configured just fine with FPse and worked everytime I started it up again, remembered just fine.
Didn't test analog though.
I configured the control and then saved it as default under settings.
If you load a game that already has a config or save you need to re-enter the controls and save again as default, this will be for that game then...
after that it works fine
Hi ...
I was trying to use the sixasis, and I could use it fine on the phone...
The problem is that I cannot use it with FPse...
Anyone can help me about how to set it ?
Thanks
What specifically are you having problems with?
1) Connect the PS3 controller via sixaxis controller app
2) Configure the PS3 controller buttons in sixaxis, i.e. what keyboard button you want each PS3 button to emulate
3) Disconnect and reconnect to Sixaxis controller app
4) Open FPse and load a game
5) Configure the controls in FPse to use the PS3, Remember sixaxis controller app makes the PS3 controller emulate keyboard buttons, so configure key bindings
6) In FPse, under system, click save default settings. If you don't do this you have to rebind the PS3 controller keys every time you start FPse
7) Play game
typci said:
What specifically are you having problems with?
5) Configure the controls in FPse to use the PS3, Remember sixaxis controller app makes the PS3 controller emulate keyboard buttons, so configure key bindings
Click to expand...
Click to collapse
That's the problem ...
I can use the controller in all other operations on the phone, but I'm not able to configure correctly the sixaxis for the FPse ...
fiuwe said:
That's the problem ...
I can use the controller in all other operations on the phone, but I'm not able to configure correctly the sixaxis for the FPse ...
Click to expand...
Click to collapse
Same issue here Were you able to get it working? If so please send link. I'm still searching for a solution.
Both work great for me on tf. There were recent issues if you were using the opengl plugin and tried to bind keys, but the newest update fixed it.
Sent from my ADR6300 using xda premium
Which specific ps3 wireless controller do you guys recommend?
anyone figure it out?
Related
Curious if anyone has tried Onlive on the Plus yet? I have it installed, but keep getting connection errors.
Yep, worked fine on my Tab7+, was on wifi (Comcast) at the time. Pretty compelling app, may have to try going through a game or two on it.
My Tab dislikes my work wifi, so I'm hoping it will work when I get on my home network. I'm curious if controller support only works with the new Onlive controller or if it will work with a PS3 controller too.
theundeadelvis said:
My Tab dislikes my work wifi, so I'm hoping it will work when I get on my home network. I'm curious if controller support only works with the new Onlive controller or if it will work with a PS3 controller too.
Click to expand...
Click to collapse
I think it's only onlive controller. Don't know if there is a workaround.
Onlive
Wouldnt work on my work network, oddly enough (Business class). However at home it let me in. Menus are laggy as all hell. Gameplay was acceptable at times, however there are lag spikes which cause slowdown and than super speed while it catches up. Very dependent on your network speed. Was still quite a thrill playing these games in the palm of your hand though.
Yeah, it's definitely not perfect, but hopefully a sign of good things to come. It would be great for some turn based games like Civ.
OnLive worked quite well for me... I think it's highly dependant on internet speed / latency though. (I have 50mb up/50mb down and 7ms ping)
Controls on the touchscreen are limited. If you're going to do it serious I'd get an onlive controller.
I bought the Onlive controller, it'll arrive tomorrow. Will let everyone know if it works with the tab.
Hello all,
Just want to give you a quick status update:
1). Onlive App works flawlessly on my Samsung Galaxy Tab 7+
2). I bought the Wireless controller, pair it via Bluetooth with my GT7+ and it works
3). I can start Onlive app, play Lego Batman (FREE if you register) and use the Wireless controller to play.
The wireless controller, once connected to Bluetooth, can even control the GT+. I use Go Launcher and I can move left and right to different screen, play music by pressing the "Play" button on the controller, etc.
So now I can play pretty much ANY games on Onlive via my GT7+. Lego batman, Just Cause 2, and HomeFront multiplayer.
One thing to note: pairing the BT requires following the instructions in here.
Once it's done, it's a breeze!
I'm very pleased that after JB update we can connect PS3 controllers via Bluetooth (without any additional apps) to TF700. It was no problem to connect 2 controllers at once... both work like a charm... it strange that light indicators on controllers indicate that both controllers are on the same "channel" (1st from 4)
...anyway.. it's a different story when you want to assign two controllers in mame4droid emulator. Everything works perfectly with one cntrl ...just need to define keys for player 1 and voila.... you can play SF3 without braking your fingers on touchpad...
I thought that it would be nice to try any fighting game for two players... unfortunately when I tried to define keys for player two (for 2nd cntrl), I saw that mapping of keys for 1 st player one was gone... it seems that mame4droid understands that these two PS3 controllers (which are both connected via bluetooth) are one and the same controller
Also tried connecting second controller with USB cable.... ...no success.
By the way no problems of using dock keyboard for second player...but this not the way out...
Anyone has any clues how to assign second controller in mame4droid?
hey buddy
i was wondering how do u set up your controller in mame4droid? i;m having a little trouble.
hey guys,
thought id share that splashtop 2 now supports controllers, mainly the xbox 360 controller but ive been testing with a ps3 controller (bluetooth) and it works surprisingly well, the ps3 controller seems to have an issue with deadzone with the analog sticks (ive contacted suppot) but other than that latency is low and very playable, ive been testing it on a 801.11n 2.5ghz network about 20+ meters away from my router and it was still playable.
To enable controller support, you need to install a driver,
open cmd with admin permissions an run cd "c:\Program Files (x86)\Splashtop\Splashtop Remote\Server\GamePad" then install_driver64.bat (or install_driver.bat for 32bit e.g.)
Restart splashtop and it should work, still the fullscreen game limitation but most games support borderless and/or windowed mode.
Enjoy
JoinTheRealms said:
hey guys,
thought id share that splashtop 2 now supports controllers, mainly the xbox 360 controller but ive been testing with a ps3 controller (bluetooth) and it works surprisingly well, the ps3 controller seems to have an issue with deadzone with the analog sticks (ive contacted suppot) but other than that latency is low and very playable, ive been testing it on a 801.11n 2.5ghz network about 20+ meters away from my router and it was still playable.
To enable controller support, you need to install a driver,
open cmd with admin permissions an run cd "c:\Program Files (x86)\Splashtop\Splashtop Remote\Server\GamePad" then install_driver64.bat (or install_driver.bat for 32bit e.g.)
Restart splashtop and it should work, still the fullscreen game limitation but most games support borderless and/or windowed mode.
Enjoy
Click to expand...
Click to collapse
I'm having a little trouble with this. I've seen a few other people online with the same problem, just no answers yet. I did everything just as you said there, just as the splashtop website says, that is. I had it say "echo off" and then a few seconds later, windows asked me if I wanted to install the driver. So I did, it installed, and I restarted splashtop. I even restarted my pc, when that failed. Either way, when I plug my Xbox 360 Controller for Windows into the usb of the dock of my ASUS tf300t, it just blinks the green circle and the only control I have is the left analog, and maybe like one other button. Any ideas?
Coming_down said:
I'm having a little trouble with this. I've seen a few other people online with the same problem, just no answers yet. I did everything just as you said there, just as the splashtop website says, that is. I had it say "echo off" and then a few seconds later, windows asked me if I wanted to install the driver. So I did, it installed, and I restarted splashtop. I even restarted my pc, when that failed. Either way, when I plug my Xbox 360 Controller for Windows into the usb of the dock of my ASUS tf300t, it just blinks the green circle and the only control I have is the left analog, and maybe like one other button. Any ideas?
Click to expand...
Click to collapse
Hmm are you using a custom rom? with my tests i used a ps3 controller and sixaxis app to access it, also does this happen on native android games? try recreate a driver using usb/bt control app
JoinTheRealms said:
Hmm are you using a custom rom? with my tests i used a ps3 controller and sixaxis app to access it, also does this happen on native android games? try recreate a driver using usb/bt control app
Click to expand...
Click to collapse
No custom rom. I do not have the tablet rooted at all, which disables me from being able to use the sixaxis app to test my ps3 controller or the usb/bt app. However, you are correct, both the PS3 controller and the Xbox360 controller for windows work perfectly on native android apps like GTA:Vice City and various emulators. So I guess that just leaves Splashtop. I'm nearly 100% certain that the Splashtop software the tf300t comes pre-loaded with is Splashtop 2. But I could be wrong.
Coming_down said:
No custom rom. I do not have the tablet rooted at all, which disables me from being able to use the sixaxis app to test my ps3 controller or the usb/bt app. However, you are correct, both the PS3 controller and the Xbox360 controller for windows work perfectly on native android apps like GTA:Vice City and various emulators. So I guess that just leaves Splashtop. I'm nearly 100% certain that the Splashtop software the tf300t comes pre-loaded with is Splashtop 2. But I could be wrong.
Click to expand...
Click to collapse
Oh make sure you download the latest splashtop 2 app from playstore, if you haven't already thats almost certainly your problem
JoinTheRealms said:
Oh make sure you download the latest splashtop 2 app from playstore, if you haven't already thats almost certainly your problem
Click to expand...
Click to collapse
Yeah, I did that too. lol. Still no go. I then went back and uninstalled and reinstalled all the software. Still no go. I was now thinking I'm just going to have to use a ps3 controller connected wirelessly to my pc upstairs, but that would require me spending another 15 bucks on a bluetooth usb adapter. I don't want to do that. lol.
Coming_down said:
Yeah, I did that too. lol. Still no go. I then went back and uninstalled and reinstalled all the software. Still no go. I was now thinking I'm just going to have to use a ps3 controller connected wirelessly to my pc upstairs, but that would require me spending another 15 bucks on a bluetooth usb adapter. I don't want to do that. lol.
Click to expand...
Click to collapse
Maybe time to switch to CromiX and try? im actually surprised there are people who haven't yet its far...far better than the laggy stock firmware
I'm trying to use my ps3 controller via Bluetooth via console mode on my tv but it keeps closing all the programs including the sixaxis service.. Any suggestions? Thanks in advance!
seniorstew said:
I'm trying to use my ps3 controller via Bluetooth via console mode on my tv but it keeps closing all the programs including the sixaxis service.. Any suggestions? Thanks in advance!
Click to expand...
Click to collapse
I think console mode is made to work with nvidia's controller specifically. Have ypu tried just mirroring it in full screen mode?
Yeah but that defeats the purpose of having the screen off
Same issue here. Just have to enable six axis blindly through the tablet. I don't think there's a way around it right now. Even my Nvidia shield controller is doing the same. It turns off the Nvidia controller too. But luckily when I turn the controller on it auto connects. Unlike my ps3 controller. But regardless which I use, any open apps closes. Has to be a software fix at this point.
I haven't used a ps3 controller with mine but will the controller connect with the tablet at all when it is powered on or do you have to do that manually through the six axis app?
Sent from my One M8
You could use Gravitybox and add sixaxis controller in quick settings as an custom app. It makes it a lot easier to enable blindly at least
console mode shus down all background programs including the sixaxis service. Unless there is a way to keep it running even in console mode i dont think it is possible atm
My solution to this was to use an Harmony Smart Control remote.
Since it supports controlling Bluetooth devices, I had set it to work with the tablet.
This allowed me to control the tablet once in console mode and turn on six axis.
I imagine a Bluetooth keyboard or a usb one with an OTG cable would also do the trick.
So I got it to work by setting six axis to auto boot with the tablet before I went into console mode
Fishwithadeagle said:
So I got it to work by setting six axis to auto boot with the tablet before I went into console mode
Click to expand...
Click to collapse
and how do you do this exactly?
you5urf said:
console mode shus down all background programs including the sixaxis service. Unless there is a way to keep it running even in console mode i dont think it is possible atm
Click to expand...
Click to collapse
Well with root, you could adjust the Android Task Manager parameters. ROM Toolbox has an option to ignore chosen apps when "multi killing running apps" for instance. It has a "keep alive" option as well. Might be worth playing around with it. It does look like there's a fair chance it wouldn't do anything though if that really is the case.
well?
Auto run the app with LLAMA
Have you guys tried using LLAMA, try setting it to launch the Sixaxis app when console mode launches or when the NVIDIA hub(im not sure on the name here.) opens up.
Make Sixaxis a systems app
Thread is a little old but for those like me looking for a solution I made sixaxis a system app ( plenty of options in the app store) and set it to auto launch in the preference menu. Once it launched into console mode I just reconnected my ps4 controller. Works a treat.
Guys, Sixaxis controller have an "AutoStart" option in settings. Just turn on it before go to console mode and Sixaxis Controller app turn on when console mode start.
Been using the Sixaxis app on my Nvidia Shield tablet to play Gamestream games on my couch. I'm using the DS4 wirelessly over BT. The Shield is connected wired via OTG LAN adapter.
Have a couple of problems that I'm trying to sort out:
1. When I hold down any of the direction pad buttons, the input is taken as multiple fast presses so it's impossible to use in some games like GTA5 where you need to hold down a direction in order to change characters. This "long press" is actually used in quite a few games so it's a big bummer that it doesn't work properly.
2. I set auto-launch in the sixaxis app but when I switch to the console mode it doesn't pair with the DS4 when I turn it in. I have to stop and then re-start the sixaxis to get it to see the DS4.
Would really like to fix at least #1. Any suggestions?
PS: Shield is on Android 5.3.
Would someone who plays with the same setup (DS4 via BT) mind posting screenshot (or description) of their Sixaxis settings?