Database Info

[Q] When it comes to me NO ONE help

nexus 9020A did rooting, but when i tried to boot up it froze and not booting up look like System.IMG missing what is the solution for that
Thanks in Advance

Lost what ever info you can so that the people you are asking for help from can better help you.
Sent from my Nexus S using XDA App

when i turn the phone on it shows me ( google) and under of it there is a open Lock and as soon as it comes phone freezes . i tried to fastboot System.Img file in it but every time i do it fails.i want to know what should i do from this place? Sorry i spent 10 hours last night to get it fixed and i was bit frustrated .
thanks

can u get into recovery by holding up volme and power button?

yes i can go into bootloader and recovery. i tried to recover it in factory mode didnt work.

any helppppppppppppppppppppp?

Put your phone into fastboot.
Download ClockWorkMod Recovery: http://download.clockworkmod.com/recoveries/recovery-clockwork-5.0.2.0-crespo.img
Flash clockwork mod recovery in fastboot with this command: fastboot flash recovery C:\where\ever\you\put\the\file.img
Then from fastboot select recovery.
Wipe data/factory reset
Install zip from sdcard: http://download.cyanogenmod.com/get/update-cm-7.1.0.1-NS-signed.zip

Do you have a custom recovery?
If yes, then download a Rom to your computer and either a) mount your to computer and transfer the Rom to your phone or b) push it to your phone with adb.
After that is done wipe everything (except sd card) and flash the Rom you just transferred to your sd card. Reboot and enjoy.
If you do not have a custom recovery then download one (search) and place it into the same folder on your computer as fastboot. Then plug your phone into the computer and boot to the bootloader. Run this command ( fastboot flash recovery insertname.Img ). After this do the steps I wrote above.
If you have any questions about the above steps then search you will find the answer. If you unlocked your bootloader than your computer obviously sees your phone and adb works well. If you can get your phone into the bootloader then I don't see any reason how your problem cannot be fixed. This leads me to believe your not quite putting forth the effort to search.
Check the stickies in this section and have fun.
Dueces
Sent from my Kindle Fire using xda premium

weehooherod2 said:
Put your phone into fastboot.
Download ClockWorkMod Recovery: http://download.clockworkmod.com/recoveries/recovery-clockwork-5.0.2.0-crespo.img
Flash clockwork mod recovery in fastboot with this command: fastboot flash recovery C:\where\ever\you\put\the\file.img
Then from fastboot select recovery.
Wipe data/factory reset
Install zip from sdcard: http://download.cyanogenmod.com/get/update-cm-7.1.0.1-NS-signed.zip
Click to expand...
Click to collapse
Beat me to it lol.
Sent from my Kindle Fire using xda premium

How about instead of making a thread with no one helps me in capital letters and bumping it over and over again. You actually put info in your thread. Like what you did. Examples. Unlocked via fastboot with sdk flashed so and so recovery and so on
Or you could have just searched the forum/read another thread about how to fix a phone stuck at google logo because of user error.
Frankly you are lucky anybody even bothered to help you at all.

TF300 Wont boot past ASUS Screen

When I hold the power button plus Volume down key I am only getting two options. One is to wipe data and the other is to enter USB Fastboot mode. I just upgraded to the latest TWRP recovery and when I click the Wipe icon the TWRP splash screen shows up for a second. What I am hoping is that someone has some insight as to why the recovery icon has disappeared and how to get it back. Usually I am not the person asking the questions generally I am the one answering. If anyone has a clue it would definitively help. I did search and found a couple threads where something similar happened but there was no direct answer as how to fix it. Please help.

stedrocklp said:
When I hold the power button plus Volume down key I am only getting two options. One is to wipe data and the other is to enter USB Fastboot mode. I just upgraded to the latest TWRP recovery and when I click the Wipe icon the TWRP splash screen shows up for a second. What I am hoping is that someone has some insight as to why the recovery icon has disappeared and how to get it back. Usually I am not the person asking the questions generally I am the one answering. If anyone has a clue it would definitively help. I did search and found a couple threads where something similar happened but there was no direct answer as how to fix it. Please help.
Click to expand...
Click to collapse
I had a similar issue when I restored a TWRP backup I made with pre version 2.2.1. I was able to get help from the Dees_Troy on IRC.
Notes from IRC conversation
Whatever you restored from your pre TWRP 2.2.1 old backup is not a kernel. The dev that made the original device configuration files for the 300 couldn't find boot . So he just threw boot onto the wrong partition you need to install a working kernel via fastboot.
Steps that got me backup and running.
1. Flashed latest TWRP via fastboot. 'fastboot -i 0x0B05 flash recovery twrp.blob' rebooted
2. Downloaded a cm9 rom and opened the zip file and extract boot.blob . Flashed with 'fastboot -i 0x0B05 flash boot boot.blob' then rebooted.
Now TWRP recovery worked and I was able to install a new custom rom.
Backups made with version 2.2.1 or grater work correctly for me now.

Thank you Thank you Thank you!
brbjr said:
I had a similar issue when I restored a TWRP backup I made with pre version 2.2.1. I was able to get help from the Dees_Troy on IRC.
Notes from IRC conversation
Whatever you restored from your pre TWRP 2.2.1 old backup is not a kernel. The dev that made the original device configuration files for the 300 couldn't find boot . So he just threw boot onto the wrong partition you need to install a working kernel via fastboot.
Steps that got me backup and running.
1. Flashed latest TWRP via fastboot. 'fastboot -i 0x0B05 flash recovery twrp.blob' rebooted
2. Downloaded a cm9 rom and opened the zip file and extract boot.blob . Flashed with 'fastboot -i 0x0B05 flash boot boot.blob' then rebooted.
Now TWRP recovery worked and I was able to install a new custom rom.
Backups made with version 2.2.1 or grater work correctly for me now.
Click to expand...
Click to collapse
That was definitely the problem and I had been trying everything for the past two days. I appreciate you taking the time to reply.

asus tf300 help
brbjr said:
I had a similar issue when I restored a TWRP backup I made with pre version 2.2.1. I was able to get help from the Dees_Troy on IRC.
Notes from IRC conversation
Whatever you restored from your pre TWRP 2.2.1 old backup is not a kernel. The dev that made the original device configuration files for the 300 couldn't find boot . So he just threw boot onto the wrong partition you need to install a working kernel via fastboot.
Steps that got me backup and running.
1. Flashed latest TWRP via fastboot. 'fastboot -i 0x0B05 flash recovery twrp.blob' rebooted
2. Downloaded a cm9 rom and opened the zip file and extract boot.blob . Flashed with 'fastboot -i 0x0B05 flash boot boot.blob' then rebooted.
Now TWRP recovery worked and I was able to install a new custom rom.
Backups made with version 2.2.1 or grater work correctly for me now.
Click to expand...
Click to collapse
hey Im sry I never posted here b4 but I think this thread is the closest to the problem I have. My tf300 jad 4.1.1 ota update, i decided to change the rom since it seemed to have so many advantages. I installed TWRP correctly and according to the process I made later with debugfs tool I got root. It was all good but then I messed up, I installed Hydroponyc rom without backing up my rom and from then on, all hell broke loose. I can acces Clockworck (I changed TWRP for clock thought it might help......) and fastboot but any rom I install it doesnt go past the first asus logo that says device is unlocked on the upper left of the screen. Is there anyway u could help me please? Forgive my noobness I never posted here b4 I dont know if Im breaking any rule but i dont wanna wind up with a very expensive paper weight.

Did I brick it?
manegonzalez said:
hey Im sry I never posted here b4 but I think this thread is the closest to the problem I have. My tf300 jad 4.1.1 ota update, i decided to change the rom since it seemed to have so many advantages. I installed TWRP correctly and according to the process I made later with debugfs tool I got root. It was all good but then I messed up, I installed Hydroponyc rom without backing up my rom and from then on, all hell broke loose. I can acces Clockworck (I changed TWRP for clock thought it might help......) and fastboot but any rom I install it doesnt go past the first asus logo that says device is unlocked on the upper left of the screen. Is there anyway u could help me please? Forgive my noobness I never posted here b4 I dont know if Im breaking any rule but i dont wanna wind up with a very expensive paper weight.
Click to expand...
Click to collapse
I kinda have the same problem! Tried the boot.blob thing but, sadly, that didn't work for me ;(

solution
mizifih said:
I kinda have the same problem! Tried the boot.blob thing but, sadly, that didn't work for me ;(
Click to expand...
Click to collapse
hey I was super frustrated by this but I took some time out and then I found this post I tried it and it worked perfectly give it a shot
Looks like partition sizes chaged with the Asus update. I couldn't flash CM10 or any other rom as well (signature mismatch). If you installed the official 4.1.1 update, you need to manually install it again. Older versions and rollbacks wont work unless you push to some trickery mmcblk0p4, but that's another thread in itself
Download the JB update from Asus's website (if you still have it, that's fine) and extract the blob file. Put the blob file in teh same directory as your fastboot. Boot your TF300 into bootloader and enter:
fastboot -i 0x0B05 flash system blob
It will take a while to install, so be patient. Hope this helps

manegonzalez said:
hey I was super frustrated by this but I took some time out and then I found this post I tried it and it worked perfectly give it a shot
Looks like partition sizes chaged with the Asus update. I couldn't flash CM10 or any other rom as well (signature mismatch). If you installed the official 4.1.1 update, you need to manually install it again. Older versions and rollbacks wont work unless you push to some trickery mmcblk0p4, but that's another thread in itself
Download the JB update from Asus's website (if you still have it, that's fine) and extract the blob file. Put the blob file in teh same directory as your fastboot. Boot your TF300 into bootloader and enter:
fastboot -i 0x0B05 flash system blob
It will take a while to install, so be patient. Hope this helps
Click to expand...
Click to collapse
Doing it now. I'll update as soon as I finish it. Thank you very much for your reply.
UPDATE 1: I can see the shiny-silver ASUS and the progress circles, waiting to see what happen!
UPDATE 2: Setting up Jellybean now (Welcome setup)!
UPDATE 3: Looks like it's working!
Dude, thank you so much! I'll fool around with it. Is there a root method working already? I was wondering if there's a way to restore my backups, at least the ones I made for my gaming progress.

manegonzalez said:
hey Im sry I never posted here b4 but I think this thread is the closest to the problem I have. My tf300 jad 4.1.1 ota update, i decided to change the rom since it seemed to have so many advantages. I installed TWRP correctly and according to the process I made later with debugfs tool I got root. It was all good but then I messed up, I installed Hydroponyc rom without backing up my rom and from then on, all hell broke loose. I can acces Clockworck (I changed TWRP for clock thought it might help......) and fastboot but any rom I install it doesnt go past the first asus logo that says device is unlocked on the upper left of the screen. Is there anyway u could help me please? Forgive my noobness I never posted here b4 I dont know if Im breaking any rule but i dont wanna wind up with a very expensive paper weight.
Click to expand...
Click to collapse
you can flash the file named "blob" extracted from stock JB zip file(download from ASUS website,now there is only US SKU,10.4.2.29),it's about 7XX MB,then use the command "fastboot -i 0x0B05 flash system blob" (put the blob in the same directory with fashboot),It will restore your JB OS.till now,other rom can not work by this way.

jijitax4 said:
you can flash the file named "blob" extracted from stock JB zip file(download from ASUS website,now there is only US SKU,10.4.2.29),it's about 7XX MB,then use the command "fastboot -i 0x0B05 flash system blob" (put the blob in the same directory with fashboot),It will restore your JB OS.till now,other rom can not work by this way.
Click to expand...
Click to collapse
What if you can only boot to APX mode? I only have the option of using that because my unlocked bootloader got erased in the process of updating to JB. Is there a way to install a bootloader using fastboot? Or will it only work with an existing bootloader?
In other words, when I issue the fastboot command
fastboot -i 0x0B05 flash system blob
I get "waiting on device" and nothing happens after that.

Thank you, this worked !!!!!!

How to flash a custom recovery on a rooted Xoom?

Hello everyone!
I've used ROM manager to flash clockwork mod recovery and it worked great until I realised that this clockwork doesn't see my SD card! I just wanted to know is there a solution to this without going back to stock etc?
Sent from my Xoom using XDA Premium HD app

Never fear! Fastboot is here!
Fastboot flash recovery recovery.img from the command line of your computer (you must have motorola drivers installed plus adb/fastboot tools)
I recommend Rogue Recovery, it's over in the android development section. Others prefer TWRP and EOS recovery. Take your pick. All support the internal SD card.

Thanks for your reply!
I thought about it initially, wanted to repeat steps used to flash it when original recovery was on. But first command re-booted xoom and took me to clockwork (no s..t, Sherlock? ) and then I thought I better stop before I end up with a brick.
So just to be clear, connect my xoom, go to the right folder on my pc and type:
fastboot flash recovery file-name.img
is that correct? do I need to be in recovery?

xywojtek said:
Thanks for your reply!
I thought about it initially, wanted to repeat steps used to flash it when original recovery was on. But first command re-booted xoom and took me to clockwork (no s..t, Sherlock? ) and then I thought I better stop before I end up with a brick.
So just to be clear, connect my xoom, go to the right folder on my pc and type:
fastboot flash recovery file-name.img
is that correct? do I need to be in recovery?
Click to expand...
Click to collapse
So you need to be in bootloader mode, not recovery. You can either turn the xoom on then press the down button about 2 seconds after you see the splash screen or use 'adb reboot bootloader'. I think it says 'starting fastboot protocol', can't quite remember from memory. then as you said, go to the right folder type fastboot flash recovery file-name.img
then fastboot reboot
then you'll be able to get into your custom recovery

love you man!

Bricked my phone trying to update to 4.2! Help!

Hello, all. I've spent the last four hours trying update my AT&T HTC One X running Android 4.1.1 to 4.2.2 and I failed hard!
First, I used the all-in-one toolkit to unlock my bootloader, flash clockwork recovery, and root the phone. The first guide I was following gave me error status 7 when I tried to flash the ROM so I wen to this guide:
update-htc-one-x-cm101-android-422-jelly-bean-custom-firmware/2/ (from team android website)
I got to the step below using the SDK I downloaded from dev.android.com and now my phone is dead! The HTC logo appears and then it goes to a black screen. Luckily, I can still reach my fastboot and clockwork recovery menu but nothing I try makes the phone boot.
Step 8 - Type the following command and press Enter.
fastboot flash boot boot.img
Step 9 - Then, type the following command and press Enter.
fastboot reboot
I just want my phone back to normal please! I don't care about rooting anymore. Thank you.

zenkix said:
Hello, all. I've spent the last four hours trying update my AT&T HTC One X running Android 4.1.1 to 4.2.2 and I failed hard!
First, I used the all-in-one toolkit to unlock my bootloader, flash clockwork recovery, and root the phone. The first guide I was following gave me error status 7 when I tried to flash the ROM so I wen to this guide:
update-htc-one-x-cm101-android-422-jelly-bean-custom-firmware/2/ (from team android website)
I got to the step below using the SDK I downloaded from dev.android.com and now my phone is dead! The HTC logo appears and then it goes to a black screen. Luckily, I can still reach my fastboot and clockwork recovery menu but nothing I try makes the phone boot.
Step 8 - Type the following command and press Enter.
fastboot flash boot boot.img
Step 9 - Then, type the following command and press Enter.
fastboot reboot
I just want my phone back to normal please! I don't care about rooting anymore. Thank you.
Click to expand...
Click to collapse
Alright, the ROMs you've been trying to flash are for the quad core One X... please stay in this forum and you should be good to go!
Any ROMs and kernels from here http://forum.xda-developers.com/forumdisplay.php?f=1541 and here http://forum.xda-developers.com/forumdisplay.php?f=1726. Try to flash something from there and report back (you'll still need to flash boot.img

RollTribe said:
Alright, the ROMs you've been trying to flash are for the quad core One X... please stay in this forum and you should be good to go!
Any ROMs and kernels from here http://forum.xda-developers.com/forumdisplay.php?f=1541 and here http://forum.xda-developers.com/forumdisplay.php?f=1726. Try to flash something from there and report back (you'll still need to flash boot.img
Click to expand...
Click to collapse
Thank you very much for your help? Could you please point me to a ROM to flash? I looked through those links and have no idea which to pick/what to do. It doesn't even have to be 4.2...I just want a working phone again. Thanks again!

zenkix said:
Thank you very much for your help? Could you please point me to a ROM to flash? I looked through those links and have no idea which to pick/what to do. It doesn't even have to be 4.2...I just want a working phone again. Thanks again!
Click to expand...
Click to collapse
Well... What would you like? Completely stock? Sense with tweaks? 4.2 with minor tweaks? 4.2 with a ton of tweaks?

RollTribe said:
Well... What would you like? Completely stock? Sense with tweaks? 4.2 with minor tweaks? 4.2 with a ton of tweaks?
Click to expand...
Click to collapse
4.2 with minor tweaks sounds great! Although right now I kinda just want to the stock "boot.img" to verify that my phone is still usable and not totally bricked.

zenkix said:
4.2 with minor tweaks sounds great! Although right now I kinda just want to the stock "boot.img" to verify that my phone is still usable and not totally bricked.
Click to expand...
Click to collapse
Alright then CM10.1 http://forum.xda-developers.com/showthread.php?t=2064621 and AOKP http://forum.xda-developers.com/showthread.php?t=2064724 will both suit you. These have the different boot.img than stock, but just extract and fastboot flash boot boot.img and you should be good to go!

RollTribe said:
Alright then CM10.1 http://forum.xda-developers.com/showthread.php?t=2064621 and AOKP http://forum.xda-developers.com/showthread.php?t=2064724 will both suit you. These have the different boot.img than stock, but just extract and fastboot flash boot boot.img and you should be good to go!
Click to expand...
Click to collapse
Quick update...I flashed boot.img of the first link (CynogenMod) and my phone got passed the "HTC Quietly Brilliant" screen! But now it seems stuck on HTC One (Beats Audio at the bottom) screen. I'll give it a few minutes...
I'm really worried that I did major damage to my phone in the bootloader and clockwork recovery menus. I literally tried every single option there trying to get my phone to boot earlier.

Oh man...it seems stuck. Maybe I should just flash the completely stock boot.img file. If that works, I will factory reset my phone just to make sure everything is back to how it was before.

Dude it sounds like you're trying to flash a cm boot.img with a Sense ROM, that ain't gonna work. You can't just extract a boot.img and flash it with a different ROM.
You need to extract the boot.img from the ROM you're about to flash, then flash that ROM, then flash the boot.img you just extracted.
Sent from my Evita

timmaaa said:
Dude it sounds like you're trying to flash a cm boot.img with a Sense ROM, that ain't gonna work. You can't just extract a boot.img and flash it with a different ROM.
You need to extract the boot.img from the ROM you're about to flash, then flash that ROM, then flash the boot.img you just extracted.
Sent from my Evita
Click to expand...
Click to collapse
Thanks for your help man. If what you're saying is correct, does that mean my phone is hopeless? I deleted/wiped everything using the ClocworkMod Recovery menu. When I choose "install zip from sdcard" I get "E: Can't mount /sdcard/" and when I try to mount an sdcard I get "Error mounting /sdcard". I don't think I can flash any ROMs right now unless install zip from sideload is an option (I don't know how sideloading works).

Try using TWRP recovery instead, you'll find it here:
http://goo.im/devs/OpenRecovery/evita
Download it, check md5 is correct, then:
fastboot flash recovery filename.img
(Filename = exact TWRP recovery filename)
Then issue this command:
fastboot erase cache
Then:
fastboot reboot-bootloader
Now you should be able to select recovery on your phone screen and it should boot into TWRP. Next go to mount and mount usb storage. See if it comes up in Windows, it might need to be formatted from the sounds of it. If it doesn't show up as a usable drive, format it to fat32.
Once that's done you should be able to copy a ROM to your phone to flash. So copy it over, then extract the boot.img from the copy on your pc, then put the boot.img in your fastboot folder.
Do a full wipe in recovery (cache/dalvik/factory reset/system), then install the ROM, then reboot to bootloader, make sure phone is connected by usb, make sure fastboot usb comes up on your phone screen then issue the following command:
fastboot flash boot boot.img
Make sure it's the boot.img from the ROM you just flashed. Now once that's done you should be able to reboot into the ROM.
Sent from my Evita

timmaaa said:
Try using TWRP recovery instead, you'll find it here:
http://goo.im/devs/OpenRecovery/evita
Download it, check md5 is correct, then:
fastboot flash recovery filename.img
(Filename = exact TWRP recovery filename)
Then issue this command:
fastboot erase cache
Then:
fastboot reboot-bootloader
Now you should be able to select recovery on your phone screen and it should boot into TWRP. Next go to mount and mount usb storage. See if it comes up in Windows, it might need to be formatted from the sounds of it. If it doesn't show up as a usable drive, format it to fat32.
Once that's done you should be able to copy a ROM to your phone to flash. So copy it over, then extract the boot.img from the copy on your pc, then put the boot.img in your fastboot folder.
Do a full wipe in recovery (cache/dalvik/factory reset/system), then install the ROM, then reboot to bootloader, make sure phone is connected by usb, make sure fastboot usb comes up on your phone screen then issue the following command:
fastboot flash boot boot.img
Make sure it's the boot.img from the ROM you just flashed. Now once that's done you should be able to reboot into the ROM.
Sent from my Evita
Click to expand...
Click to collapse
This sounds like a good plan. I will give it a try tomorrow after work. Thank you guys for your help!

I couldn't sleep...so I followed your steps and my phone is now alive! Thank you!
I think now I need to flash GApps, right? I have this ---> gapps-jb-20130301-signed.zip
Any chance that's the wrong zip file? Do I need a special one for CM10.1?

That's the right gapps zip, it's the most recent one so yeah you're good to flash it.
And no problems, you're welcome
Sent from my Evita

[Q] bad flash

Hi i have rooted and flashed the phone it got stuck on the htc screen so i tried factory reset bad idea now my phone will just go into the bootlader menu i can enable fastboot usb but it dont show up on computer but the computer makes a noise to say ive connected it i cant enable usb debugging because the phone wont come on i have tried to flash another boot img through fastboot with no luck im hoping its not bricked
please any help would be appreciated thanks

pl4yb0y78 said:
Hi i have rooted and flashed the phone it got stuck on the htc screen so i tried factory reset bad idea now my phone will just go into the bootlader menu i can enable fastboot usb but it dont show up on computer but the computer makes a noise to say ive connected it i cant enable usb debugging because the phone wont come on i have tried to flash another boot img through fastboot with no luck im hoping its not bricked
please any help would be appreciated thanks
Click to expand...
Click to collapse
Hmm. so you probably need to flash a recovery first.
then you will be able to use the recovery to mount usb and put a new rom on your "sd card"
Then you can flash the rom on your new recovery and don't forget to fastboot flash the boot.img.
edit: the all in one toolkit is great for things like this. It will put a new recovery on your phone with just a click of the button.
http://forum.xda-developers.com/showthread.php?t=1604677

tivofool said:
Hmm. so you probably need to flash a recovery first.
then you will be able to use the recovery to mount usb and put a new rom on your "sd card"
Then you can flash the rom on your new recovery and don't forget to fastboot flash the boot.img.
Click to expand...
Click to collapse
Thanks for the reply but i dont know how to do this ?
could you please explain it ?

pl4yb0y78 said:
Thanks for the reply but i dont know how to do this ?
could you please explain it ?
Click to expand...
Click to collapse
I just edited my original post. just in case you didn't know how. I guess I was a little slow.
Also I can't remember if a bootloader factory reset relocked your phone but you might want to check that too. up on top it would say locked or relocked. If it still says unlocked you don't have to do that step again. Like you did when you first rooted the phone.
(all in one tool kit is great for unlocking and relocking too) just put a copy of that bin file in all in one tool kit (data file i believe, but it says what to do in that thread)

tivofool said:
I just edited my original post. just in case you didn't know how. I guess I was a little slow.
Also I can't remember if a bootloader factory reset relocked your phone but you might want to check that too. up on top it would say locked or relocked. If it still says unlocked you don't have to do that step again. Like you did when you first rooted the phone.
(all in one tool kit is great for unlocking and relocking too) just put a copy of that bin file in all in one tool kit (data file i believe, but it says what to do in that thread)
Click to expand...
Click to collapse
hi i have got the tool kit run twrp s3 now i have a black htc logo screen on what next

pl4yb0y78 said:
hi i have got the tool kit run twrp s3 now i have a black htc logo screen on what next
Click to expand...
Click to collapse
Your phone is an s3?
My phone is an S4 as are I would guess the majority of users. I think the s3 is the international version. If you are on T mobile then it's a s4.
Ok,,,
so .... if your phone is an s3 version then you will have to check that the Rom you download is specific for your phone as most of the Roms on this site are for the s4 version.
you need to go to your recovery. press the volume down button and hold it. Then press the power button (don't hold it). That will get you to recovery.
when in twrp recovery you will see a mounts button. hit that then the next screen will have mount usb. then you will be able to move a rom you downloaded on your computer to your phone.
then you can install the rom zip in twrp.
then from your computer, I assume you know how to flash a boot.img
put a boot.img in your fastboot folder, open up a comand prompt.
fastboot flash boot boot.img
if you wanted a different recovery than you are using, find the download the recovery. *I would rename the recovery to recovery.img
fastboot flash recovery recovery.img
(I only mention a different recovery because in some of the Rom threads you might read that you can only install a particular rom with an older version of twrp.)
I'm not sure of your skill or experience with all of this. If you are very new to it (then you are probably really frustrated) have no fear there is a little bit to learn but not that much. Just keep reading the development thread and the guides in it.

tivofool said:
Your phone is an s3?
My phone is an S4 as are I would guess the majority of users. I think the s3 is the international version. If you are on T mobile then it's a s4.
Ok,,,
so .... if your phone is an s3 version then you will have to check that the Rom you download is specific for your phone as most of the Roms on this site are for the s4 version.
you need to go to your recovery. press the volume down button and hold it. Then press the power button (don't hold it). That will get you to recovery.
when in twrp recovery you will see a mounts button. hit that then the next screen will have mount usb. then you will be able to move a rom you downloaded on your computer to your phone.
then you can install the rom zip in twrp.
then from your computer, I assume you know how to flash a boot.img
put a boot.img in your fastboot folder, open up a comand prompt.
fastboot flash boot boot.img
if you wanted a different recovery than you are using, find the download the recovery. *I would rename the recovery to recovery.img
fastboot flash recovery recovery.img
(I only mention a different recovery because in some of the Rom threads you might read that you can only install a particular rom with an older version of twrp.)
I'm not sure of your skill or experience with all of this. If you are very new to it (then you are probably really frustrated) have no fear there is a little bit to learn but not that much. Just keep reading the development thread and the guides in it.
Click to expand...
Click to collapse
Thank you for the reply yes i am getting stressed at this and i am new had a break before i smashed the phone now ive just got to find out what my phone is s3 or s4 ? google will help

when i connect my phone to the computer in recovery or flashboot it does not let me see it so i can not put rom on the hdd
(tried restart phone no luck tried restart comy no luck, cant get it to show phone ) all drivers installed
can i use the tool kit to flash recovery ?
phone on orange uk ,is it a s4 ?
thanks for the help guys with your knowledge i will get it working i pray!

pl4yb0y78 said:
when i connect my phone to the computer in recovery or flashboot it does not let me see it so i can not put rom on the hdd
(tried restart phone no luck tried restart comy no luck, cant get it to show phone ) all drivers installed
can i use the tool kit to flash recovery ?
phone on orange uk ,is it a s4 ?
thanks for the help guys with your knowledge i will get it working i pray!
Click to expand...
Click to collapse
do you have your box the phone came in?
Z520e is S4
Z560e is S3
So were you able to put twrp on your phone? when you are in boot loader and click on the recovery does it take you to twrp? Yes the all in one toolkit will flash a recovery for you. but you have your boot loader unlocked first.

tivofool said:
do you have your box the phone came in?
Z520e is S4
Z560e is S3
So were you able to put twrp on your phone? when you are in boot loader and click on the recovery does it take you to twrp? Yes the all in one toolkit will flash a recovery for you. but you have your boot loader unlocked first.
Click to expand...
Click to collapse
yes i now have the twrp in recovery it says enter password and cancel i tried both it was the s4 one that worked so im guessing its an s4
what will the next step be? (if i need anything please could you leave a link)
thanks for all the help starting to feel i might win lol

in twrp when you press "mounts" then press "mount usb", does your computer finally see your phone?
I was looking at your first post, you say that you rooted and flashed your phone. What do you mean by that? Did you download a ROM and attempt to flash it? Or did you "fastboot flash boot boot.img"?
If you are able to access your phone via computer it is as simple as downloading a rom on your computer moving it to your phone then in twrp "install from zip". Then fastboot flash the boot.img.
http://forum.xda-developers.com/showthread.php?t=1583427
how to flash fastboot
http://forum.xda-developers.com/showthread.php?t=1752270
if you are just fed up and want your phone back to stock then you will need to run an RUU.
http://forum.xda-developers.com/showthread.php?t=2094414
To run a RUU you would need to relock your bootloader.
in console type "fastboot lock oem" or use your all in one toolkit to relock it.
if that fails you will need to put your stock recovery back. (you need to have boot loader unlocked to do this)
on the clockworkmod recovery page the stock recovery is the second download link.
http://www.modaco.com/topic/353006-...ch-recovery-for-the-htc-one-s-stock-download/

Ok i am now really confused nothing works downloaded recovery roms they wont install always says failed tried to adb sideload it after google it failed again tried 3 recovery roms all fail what is going wrong icant get it to work
so far ive put twrp on it pressed mount so i can put rom on phone worked
pressed install pressed zip failed
pressed adb sideload then start on comy sent rom 100% install failed
reeboot phone still no os
tried this 3 times different roms all failed
please help

pl4yb0y78 said:
Ok i am now really confused nothing works downloaded recovery roms they wont install always says failed tried to adb sideload it after google it failed again tried 3 recovery roms all fail what is going wrong icant get it to work
so far ive put twrp on it pressed mount so i can put rom on phone worked
pressed install pressed zip failed
pressed adb sideload then start on comy sent rom 100% install failed
reeboot phone still no os
tried this 3 times different roms all failed
please help
Click to expand...
Click to collapse
Do you know how to FASTBOOT FLASH boot.img which is present inside the ROM.ZIP?
Try wiping data, cache, dalvik. Then reinstall.
Sent from my Nexus 7 using Tapatalk HD

khan.orak said:
Do you know how to FASTBOOT FLASH boot.img which is present inside the ROM.ZIP?
Try wiping data, cache, dalvik. Then reinstall.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
thanks and yes i can do that i will try and get back to you

C:\adt-bundle-windows-x86_64-20130522\sdk\platform-tools>fastboot boot boot.img
creating boot image...
creating boot image - 16779264 bytes
downloading 'boot.img'...
OKAY [ 1.890s]
booting...
FAILED (remote: reproduce boot image with on-flash ramdisk error)
finished. total time: 1.926s
this is what i get when i try tried 3 imgs

pl4yb0y78 said:
C:\adt-bundle-windows-x86_64-20130522\sdk\platform-tools>fastboot boot boot.img
creating boot image...
creating boot image - 16779264 bytes
downloading 'boot.img'...
OKAY [ 1.890s]
booting...
FAILED (remote: reproduce boot image with on-flash ramdisk error)
finished. total time: 1.926s
this is what i get when i try tried 3 imgs
Click to expand...
Click to collapse
The command is:
Code:
fastboot flash boot boot.img

khan.orak said:
The command is:
Code:
fastboot flash boot boot.img
Click to expand...
Click to collapse
ok i try this i am only learning but getting there lol