Database Info

[ROM][STOCK UVKD1 - FLASHABLE] T959VUVKD1 Zip File

So after a bit of work I was able to decrypt the encrypted file from the fus.samsungmobile.com site. The result? The stock zip able to be flashed to your device to put it on UVKD1.
Mostly I did this because of people who may have problems with Kies Mini to update to UVKD1 (like I did, took forever to get drivers etc and kies to behave).
Again this is completely stock! Nothing done to it. I did use Kies Mini to apply this update automatically, but again it's the unencrypted zip that gets flashed to your phone.
As always, I'm not responsible for bricking your device etc. etc.
I imagine this can be used via ODIN to update your device, but again I haven't gone through this process.
As I have not tested this method personally, I cannot guarantee anything. Just wanted to provide the STOCK Zip without the encryption on it.
Anyone more knowledgeable about this please feel free to interject.
Stock UVKD1 ZIP
http://www.multiupload.com/NW7XF9XQYT

Omg KD1 awesomeee u hope they fix the SMS issues and some of the other issued the sgs4g had.
thanks man you rule.
I'm downloading it to try it
Inside the zip there is a .tar.nd5 file would I be able to flash it with Odin like the other .tar that we have around?
Sent from my SGH-T959V using XDA App

Zixx said:
Omg KD1 awesomeee u hope they fix the SMS issues and some of the other issued the sgs4g had.
thanks man you rule.
I'm downloading it to try it
Inside the zip there is a .tar.nd5 file would I be able to flash it with Odin like the other .tar that we have around?
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
That's what I figure. No PIT as far as I know either.
I imagine following the ODIN guide is the proper way to flash this stock KD1 http://forum.xda-developers.com/showthread.php?t=1001759.

joedeveloper said:
That's what I figure. No PIT as far as I know either.
I imagine following the ODIN guide is the proper way to flash this stock KD1 .
Click to expand...
Click to collapse
Well lets give it a try in the name of well trying to get the newest Rom a try Xd. The only thing I'm wondering is what does that .DLL does
Sent from my SGH-T959V using XDA App

Flashing Works good and flawless no issue.

arahma said:
Flashing Works good and flawless no issue.
Click to expand...
Click to collapse
Did u flash using odin or using recovery?

I used odin 1.3, 512.pt and no partition.

Has anyone tried flashing this with a rooted phone that also has the bootanimation change applied? I just don't want to brick my phone lol.

arahma said:
I used odin 1.3, 512.pt and no partition.
Click to expand...
Click to collapse
You used a .pit file and had no issues??

Heimdall worked on this. And (in a fit of insanity), I had Deodexed KC1, flashed the 4 files right over KC1.
Its booting fine.
(Update - it's booted. Now I have to go through rooting it...again).

sgyee said:
Heimdall worked on this. And (in a fit of insanity), I had Deodexed KC1, flashed the 4 files right over KC1.
Its booting fine.
(Update - it's booted. Now I have to go through rooting it...again).
Click to expand...
Click to collapse
LOL I know what you mean. Word is there will be a deodexed version of this fairly soon

Anyone else get SuperOneClick with RITC exploit to work with KD1? I can't.

sgyee said:
Anyone else get SuperOneClick with RITC exploit to work with KD1? I can't.
Click to expand...
Click to collapse
use psneuter I don't use rage, and i think in the latest version it's been taken out.

joedeveloper said:
use psneuter I don't use rage, and i think in the latest version it's been taken out.
Click to expand...
Click to collapse
Cool. It's rooted again. So, at least the normal tools work fine.
Now, I'm going to play with it. See what (if any) is different. Likely - nothing.

sgyee said:
Cool. It's rooted again. So, at least the normal tools work fine.
Now, I'm going to play with it. See what (if any) is different. Likely - nothing.
Click to expand...
Click to collapse
only thing I noticed was that the pattern lockscreen now has the emergency button at the bottom centered below the pattern. It's fairly smooth, seems like mostly bug fixes based on the release notes.
I'd really be curious to find out what the OTA url is for this, but not sure anyone here is going to get the OTA, cause we're probably all rooted or that and KC1 won't.
However, if anyone does wanna logcat and then get the OTA eventually that would be cool.

deodexed version is coming soon!

chadster214 said:
deodexed version is coming soon!
Click to expand...
Click to collapse
Awesomeness!!!
Hopefully we get a Nice Boot animation with the Deodexed Version I hate the Pink Boot animation thingy

chadster214 said:
deodexed version is coming soon!
Click to expand...
Click to collapse
Cool! That's gonna be nice.

This was awesome.
I thought i had to redo my homescreens, my contacts, etc.
But everything stayed the same.
Thanks!
EDIT:
Meh, it seems i still can't send picture messages...

MarkP80nj said:
This was awesome.
I thought i had to redo my homescreens, my contacts, etc.
But everything stayed the same.
Thanks!
EDIT:
Meh, it seems i still can't send picture messages...
Click to expand...
Click to collapse
Maybe coverage? I just sent a picture message with out any problems.

Quick guide for flashing Gingerbread KF1 and rooting

I am not responsible for brick phones. This method worked for me. If there is any confusion or something is not clear, ASK!
I see Kaik541 has a thread in Dev section for an ODIN version of KF1
http://forum.xda-developers.com/showpost.php?p=14782572&postcount=1
This is for those who want to flash and root from using the tar files.
I personally always remove my external memory and sim card before using odin. It is not needed as people will obviously post and neither is doing master clear. I do these steps just to make sure I eliminate any possible issues that can occur during flashing.
1) Download Firmware from http://www.samfirmware.com/WEBPROTECT-samsungusa.htm
2) Flash back to stock JF6 w/ odin one-click and did a master clear.
3) Flash Gingerbread KF1 using Odin (see image attached)
4) Flash fugu kernel http://forum.xda-developers.com/show....php?t=1010141 (I attached the zImage-root.tar to post if link does not work)
In the first post look for and select the download link in step 2: (credit to nikademus)
How to use:
1: Flash the stock rom
2: Download the image for Heimdall or for Odin
3: Flash it with either Odin or Heimdall
4: Boot once, it will install root and crash/shutdown (it is preferred to let the phone connected to usb so it does not loop boot)
5: Reflash the original kernel
5) Flash stock kernel (attached kernelKF1.7z) credit to lownox for helping me on that
6) Settings>Applications> enable Unknown Sources (AT&T finally got something right)
7) Install busybox from market
8) ENJOY!

thanks for the write up man
getting 404 on image link...

your links for steps 3, 4, and 5 don't work.
links working now

links worked for me
3. http://forum.xda-developers.com/showpost.php?p=14785219&postcount=75
4. http://forum.xda-developers.com/showthread.php?t=1010141
5. http://forum.xda-developers.com/showpost.php?p=14791212&postcount=116

Added more to the fugu step, let me know if I missed anything else.

Once someone gets this done, they should dump it, deodex it, then upload.

emuneee said:
Once someone gets this done, they should dump it, deodex it, then upload.
Click to expand...
Click to collapse
I want to do that but I haven't learn how to do anything beyond deodexed. I also still haven't had time to learn how to add "extras" like extended power menu or additional lock screens.
If someone wants to PM the instructions or a link to do so, I'll be happy to do and have it ready tomorrow.

Do we really need another Odin guide? Write one on heimdall. It's open source and actually maintained. It also has a lower brick rate.

AdamOutler said:
Do we really need another Odin guide? Write one on heimdall. It's open source and actually maintained. It also has a lower brick rate.
Click to expand...
Click to collapse
Honestly I have never used Heimdall and have never had an issue with ODIN. With that said I also have no objection if anyone wants to write up the parts for Heimdall here or by PMing me, I'll add to it the first post. I am not about to reflash again just to learn a new process when the old one has not given me a single issue.

made a deodex version, just dont know what to do with it
its not ready for flash or anything and its just deodexed using illdroid.
Doesn't matter anyways until we get CWM working...

nakedninja42 said:
made a deodex version, just dont know what to do with it
its not ready for flash or anything and its just deodexed using illdroid.
Doesn't matter anyways until we get CWM working...
Click to expand...
Click to collapse
care to share it?

nakedninja42 said:
Honestly I have never used Heimdall and have never had an issue with ODIN. With that said I also have no objection if anyone wants to write up the parts for Heimdall here or by PMing me, I'll add to it the first post. I am not about to reflash again just to learn a new process when the old one has not given me a single issue.
Click to expand...
Click to collapse
There's really nothing new to learn. It looks and loads almost exactly like Odin. Not sure what processes are different when you push the start button though. I'm not pushing heimdall, just conveying what i've seen with it. I used once to load the last Andro3.

Johnsondr80 said:
care to share it?
Click to expand...
Click to collapse
Ill try to upload it later tonight when I get back to my computer. Only thing I wanted to figure out before I did it is how to zipalign to make it smaller. I've tried apk manager in the past but that didn't work for me.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

nakedninja42 said:
Ill try to upload it later tonight when I get back to my computer. Only thing I wanted to figure out before I did it is how to zipalign to make it smaller. I've tried apk manager in the past but that didn't work for me.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
got mine deodexed. thanks tho

Loving this ROM stock and all. Has anyone seen if 3e recovery (I think its called) has been enabled yet for KF1? Id like to be able to flash stuff again. Alternatively if anyone has a method for flashing items via a program that would be great as well.
Cheers!

docflower said:
Loving this ROM stock and all. Has anyone seen if 3e recovery (I think its called) has been enabled yet for KF1? Id like to be able to flash stuff again. Alternatively if anyone has a method for flashing items via a program that would be great as well.
Cheers!
Click to expand...
Click to collapse
DG has made cog5 beta kernel 2 which supports CWM 4. Its stock kernel with CWM. Check the dev forum for cog beta 5 rom and grab the kernel in step 2.
Sent from my GT-P7510 using XDA Premium App

^^^ thanks
Sent from my SAMSUNG-SGH-I897 using XDA App

UCLE2 - Can't get root access

I'm just starting to learn how to do all this...
I have CWM 5.8.4.0 installed, UCLD2 and Superuser 3.0.7
I've lost root access and can't figure out how to get it back. I've been searching the forum but can't quite seem to find what I need. I went through the process for rooting and no good result. I thought maybe I should just do a recovery back to 2.3.6 in CWM and it says the MD5 mismatch. I thought I had a solid backup for my original phone all this time. I restored it once through ROM manager and it worked great. I did a factory reset and went through the rooting process again and still nothing.
What my goal is, is to flash to a ROM that people are liking and that performs well. Was going to try SKYICS 4.2E, but I don't think I should attempt anything until I figure out how to go to a backup consistently. I could back up what I have now, which gives me a working phone, but I don't really like it. Most of my apps don't work correctly on it. What I really don't want to do is go forward again and really have it jacked up and not be able to go to a previous backup.
Where should I start? I'm guessing getting root access again. I'm assuming I won't be able to flash another ROM until I get this.
Thanks for the help!

I was having that problem too, I used this script "su_ics_v3.1_updated_wraithdu_installer" also install and run busybox if you haven't already or just flash an insecure kernel (make sure its right for your rom)

jordan9812 said:
Just go read the faxes then after hours of that restore to stock and read the rooting guide good luck
Sent from my SAMSUNG-SGH-I727 using XDA
Click to expand...
Click to collapse
Okay funny guy... What was my first line again??? lol
I don't even know how to get back to stock. I can do that even if I don't have root access? I'm just trying to learn the mechanics of all this. Learn what does what... CWM is a means to write to the phone from boot. Can install different ROMs and parts of ROMS, ie. lock screens... Then there's kernels that operate the hardware that have to be compatible with the ROM. People talk about way more than I can comprehend at this point; it's one step at a time for learning.
So---first step is what? Read for hours? I don't understand what I'm reading. haha

32dave said:
I was having that problem too, I used this script "su_ics_v3.1_updated_wraithdu_installer" also install and run busybox if you haven't already or just flash an insecure kernel (make sure its right for your rom)
Click to expand...
Click to collapse
What was the very first line in my post? lol
I'm not a programmer, but have taken some Java classes.
I don't know how to use scripts at all. In my mind, I can't do anything until I get root access. I'm not sure what the MD5 mismatch means either. I'm definitely reading things, but it seems that either I'm not understanding or that it's a tangent and not really related to what I'm trying to do...

You don't need root access. All you need is cwm to flash roms, kernels and radios
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

I'm starting to figure that out. This stuff isn't very simple. It seems like it is, but for some reason it's just not. It's like a tractor pull. The more I learn the harder it gets to learn more because the crap gets too deep!

CodeRedDewd said:
I'm starting to figure that out. This stuff isn't very simple. It seems like it is, but for some reason it's just not. It's like a tractor pull. The more I learn the harder it gets to learn more because the crap gets too deep!
Click to expand...
Click to collapse
read the n00b posts and stickies, its really not that hard, all roms r rooted..meaning u dont have to root, u can do root ur self for stock firmware, the hard part(not really hard) is flashing cwm(clockworkmod recovery) via odin, once u do that flash a rom according to the rom u want to use, read this on howto root and flash cwm using odin http://forum.xda-developers.com/showthread.php?t=1340526
to go back to stock is very easy also via odin, read this link on howto http://forum.xda-developers.com/showthread.php?t=1652398
once u find a rom read all about that rom on how to flash it and any trouble shooting
clockworkmod recovery replaces the stock recovery so u can do wonderful things to our phones, it's this application that installs(flashes) the roms

Thanks for the info... I installed another ROM that I liked better, SKYICS without the root. I wanted to tweek something else and I cannot do it unless I get root access. Using Odin is pretty easy like you said and CW recovery. The first link you posted is the one I originally followed and it was rooted. I went through the process again and no root. Titanium just says sorry I don't have permission. I did a factory reset and tried to root again and nothing. I'm not sure where to go from here to get the root back....

If you flash a custom ROM they are already rooted
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

I don't have root access. I did have it, but lost it when I installed ICS 4.0.4.
Titanium is saying it can't do anything... I just checked and now it's working. I didn't change anything. That's weird. It asked me for permission and is now in the superuser list. I couldn't get anything to do that for a few days. I'll just have to say Okay and move on. lol

CodeRedDewd said:
I don't have root access. I did have it, but lost it when I installed ICS 4.0.4.
Titanium is saying it can't do anything... I just checked and now it's working. I didn't change anything. That's weird. It asked me for permission and is now in the superuser list. I couldn't get anything to do that for a few days. I'll just have to say Okay and move on. lol
Click to expand...
Click to collapse
thats why i said when u use a rom "once u find a rom read all about that rom on how to flash it and any trouble shooting", its usually a bad flash, if reflashing doesnt work then redownload the rom and again and flash
u could of flashed superuser, but the problem was the rom didnt install properly......good u got it solved

32dave said:
I was having that problem too, I used this script "su_ics_v3.1_updated_wraithdu_installer" also install and run busybox if you haven't already or just flash an insecure kernel (make sure its right for your rom)
Click to expand...
Click to collapse
Can you be more specific on rooting 4.0.4? I didn't like SKY ICS and installed Embryo. It's much faster than the other, but now I don't have root again. I don't know how I got root access to SKY ICS, because when I asked I didn't have root, but 2 days later I suddenly had the access and did nothing.
I'm browsing around trying to find how people root 4.0.4...

CodeRedDewd said:
I'm browsing around trying to find how people root 4.0.4...
Click to expand...
Click to collapse
I used the 1st 3 steps for my ULCE2 [GUIDE]{ROOT}How To Root The ICS Leak

pc103 said:
I used the 1st 3 steps for my ULCE2 [GUIDE]{ROOT}How To Root The ICS Leak
Click to expand...
Click to collapse
That's exactly what I did and it's not working. I'm using CWM touch and tried 2 different superuser files I've found and nothing. BusyBox won't install because it says it doesn't have permission and I can't mount the drive in the phone with a file explorer because it's not rooted.
I read somewhere that I may need to install an "insecure kernel", or maybe a ROM that is already rooted? I can't figure those things out....
I've even started all over and flashed the UCLE2 again, cleared all data. then installed Embryo, CWM then superuser. No luck. I'm at a loss here.
Update: I have tried these superuser files.
Superuser, Superuser-3.0.7-d-signed and Superuser-3.0.7-efghi-signed. The last one gave me root access for 4.0.4. I'll attach the file for others.

CodeRedDewd said:
That's exactly what I did and it's not working. I'm using CWM touch and tried 2 different superuser files I've found and nothing. BusyBox won't install because it says it doesn't have permission and I can't mount the drive in the phone with a file explorer because it's not rooted.
I read somewhere that I may need to install an "insecure kernel", or maybe a ROM that is already rooted? I can't figure those things out....
I've even started all over and flashed the UCLE2 again, cleared all data. then installed Embryo, CWM then superuser. No luck. I'm at a loss here.
Update: I have tried these superuser files.
Superuser, Superuser-3.0.7-d-signed and Superuser-3.0.7-efghi-signed. The last one gave me root access for 4.0.4. I'll attach the file for others.
Click to expand...
Click to collapse
This superuser zip gave root access where other versions did not for 4.0.4.

CodeRedDewd said:
That's exactly what I did and it's not working. ...
I read somewhere that I may need to install an "insecure kernel", or maybe a ROM that is already rooted?....
I've even started all over and ...I'm at a loss here..
Click to expand...
Click to collapse
(See below)
CodeRedDewd said:
This superuser zip gave root access where other versions did not for 4.0.4.
Click to expand...
Click to collapse
...which is why we're focused on the one method with its 3 or 4 steps we linked. [Confession] My bad, I forgot to mention as is often covered in the threads - CWM flashing the zip took me a few (4) retries. I only backed up as far as 'select update from sdcard' for each retry, all within the same recovery session. Maybe this will help?

pc103 said:
(See below)
...which is why we're focused on the one method with its 3 or 4 steps we linked. [Confession] My bad, I forgot to mention as is often covered in the threads - CWM flashing the zip took me a few (4) retries. I only backed up as far as 'select update from sdcard' for each retry, all within the same recovery session. Maybe this will help?
Click to expand...
Click to collapse
It wasn't the steps ther were wrong. It was superuser that was wrong. I tried and tried with 2 different ones and nothing. Then I found another version that worked on the first attempt. The versions I tried first worked on 2.3.5, but not on 4.0.4.
I'm attaching the one I found that worked the first time. I tried the others about 20 times each and nothing, but they worked before. I haven't read anywhere that there are different versions of superuser that only root certain builds. I found it out the hard way.

If i can remember "SOME" superuser zips need to be flashed a few times before they flash successfully.
Sent from my SAMSUNG-SGH-I727 using XDA

jyazzie110 said:
If i can remember "SOME" superuser zips need to be flashed a few times before they flash successfully.
Sent from my SAMSUNG-SGH-I727 using XDA
Click to expand...
Click to collapse
Thanks. I have read that, and that it works sometimes when it says it fails. The problem was that there are a few versions of superuser. I had two that worked on previous versions of android, like 2.3.6, but they won't work on 4.0.4. I found a different one named. "Superuser-3.0.7-efghi-signed" that worked first time. I tried the others more than enough. They don't work on 4.0.4. It's funny no one has mentioned this before.

Let's be clear.
I am glad you reached this goal CodeRed. Enjoy!
CodeRedDewd said:
...It wasn't the steps that were wrong....The problem was that there are a few versions of superuser.
Click to expand...
Click to collapse
Yes, but there was only one version in the [GUIDE]{ROOT}How To Root The ICS Leak.
CodeRedDewd said:
I had two that worked on previous versions of android, like 2.3.6, but they won't work on 4.0.4. I found a different one named. "Superuser-3.0.7-efghi-signed" that worked first time. I tried the others more than enough. They don't work on 4.0.4. It's funny no one has mentioned this before.
Click to expand...
Click to collapse
I had the older zip too, but it was all properly instructed in our [Dev] thread. Copperhed posted 'This will root 2.3.5 or 2.3.6' for an earlier Superuser.zip last November, linked in InSaiyanone's excellent all-in-one guide.
Needing to root 4.0.4 would lead us to the next stickie, where projeqht linked
Starskyrob's 'Step 2: Flash Attached zip from recovery.' in his [GUIDE]{ROOT}How To Root The ICS Leak, posted March 28th, referring to the zip you and I succeeded with. I think anyone reading the stickies should find the same guidance.

[VIDEO] FP5 Update Zip + Rooting Stock

I felt this warranted its own thread, and is pertinent to development. So here's to my first thread in the development section!
As you know, the Charge is getting an update to its Gingerbread stock ROM, titled FP5.
I was one of the lucky ones to get it early, so I pulled it out of cache and uploaded it to Dropbox.
So here it is:
http://db.tt/feigCZuH
If you want to try it:
You need to be fully stock before you can use this. This includes being on RFS. Then download, rename to update.zip, place on root of SD, and flash on the stock recovery.
To Root (assuming starting at stock FP5):
Download the CWM flashable root zip, found at http://androidsu.com/superuser/ (its rude of me to hotlink it). Download the whole package for ARM, not just binary (get 3.0.7-efghi-signed). Put it on your SD card.
NOTE: Most of us Charge users have found that SuperSU (Chainfire's replacement for Superuser) is much more stable on this device. I personally recommend SuperSU, but if you want to keep using superuser, it's your call. Installation instructions will be the same, just Google SuperSU and download the zip rather than Superuser.
Then, get the CWM recovery, and flash it via Odin. Uncheck "auto reboot". Unplug your device and boot to CWM, mount /system, then flash the SU zip (I would wipe cache and dalvik just to be safe).
Your device will boot and be rooted, however the CWM recovery will be overwritten. Get root explorer and search for "install-recovery.sh" (in /system/etc) Change permissions, delete, rename, or otherwise maim the script.
Finally, reflash CWM in Odin. Your device will boot and be rooted, with CWM Recovery, with in the stock FP5 ROM. Feel free to debloat to your pleasing.
You want a video tutorial? You're hard to please.
http://youtu.be/DXSmONvpkSQ
the introduction is VERY off sync. Please don't turn the volume up and scare the crap out of yourself. Sorry, I can't make it available on mobile, something about copyright infringement.
I'll be making an Odin next week, since a user requested it. Just have to wait until I get back from vacation... EDIT: Odins are already available. None from me.
Sent from my SCH-I510 using xda premium

I look forward to see how the Tweaked version of FP5 goes & if anything will be of use to dwitherell.
Thanks for posting FP5. :victory:

kvswim said:
I felt this warranted its own thread, and is pertinent to development. So here's to my first thread in the development section!
As you know, the Charge is getting an update to its Gingerbread stock ROM, titled FP5.
I was one of the lucky ones to get it early, so I pulled it out of cache and uploaded it to Dropbox.
So here it is:
http://db.tt/feigCZuH
I have no idea of you need to rename it to update.zip or anything like that, so if someone smarter than me could advise, that would be helpful
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
Thank you so much for uploading this Kvswim! Hopefully the developers can use your update to make an update of their own like Tweaked! :good:

kvswim said:
I have no idea of you need to rename it to update.zip or anything like that, so if someone smarter than me could advise, that would be helpful
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
You do need to rename it to update.zip before you flash it with the stock recovery

kvswim said:
I was one of the lucky ones to get it early, so I pulled it out of cache and uploaded it to Dropbox.
Click to expand...
Click to collapse
Thank you sir, can't wait to try it on my charge when it comes back from samsung...unless they send me back a nexus

has anyone tried it yet? I'm assuming it will work on tweaked 2.x?
I tried to flash it via CWM (before realizing that I needed to rename it to "update.zip"), but got "installation aborted". I did revert back to RFS first though.... I guess I'll try it again...

You most likely have to be full stock to use it.

jco23 said:
has anyone tried it yet? I'm assuming it will work on tweaked 2.x?
I tried to flash it via CWM (before realizing that I needed to rename it to "update.zip"), but got "installation aborted". I did revert back to RFS first though.... I guess I'll try it again...
Click to expand...
Click to collapse
You have to be 100% stock FP1 stock recovery

OK, so first off thanks kvswim for getting this out there so fast
Secondly, I'm out and about for a wee bit, but once I'm back at my computer (mid next week) I'll get to work. I'm not sure how long it'll take, but I always assume it'll take a while.
I would also like to put out a request. The last update I did I went through and updated every theme in tweaktools along the way. That took a LONG time, so I was wondering if there were any interested in assisting the theme update process. This will obviously not be relevant until I have the base all finished up, but if you feel you have some of the necessary know-how and are interested feel free to PM me. Most of the themes were made by folks that no longer have the device, which is why I updated everything last time. If I get a few takers I'll make a thread to keep things all organized as far as who is doing what, that way proper credit can be given to those that lend a hand.
Also, no worries if there is no interest/time to help. I have no issue doing it, it'll just take a bit longer.
Carry on.

I can probably make an Odin of this next week if anyone wants it.
Also dwith, I can't help you at all with the themes, I would need to walk through it at least once first. Never taken apart a theme.
Sent from my SCH-I510 using xda premium

Does this include improved radios? Will there be new radios we could flash before Tweaked gets updated?

Yes, there are radio updates in this. However I can't pull radios only until next week, and even then I'll need someone to help me.
Sent from my SCH-I510 using xda premium

kvswim said:
I can probably make an Odin of this next week if anyone wants it.
Also dwith, I can't help you at all with the themes, I would need to walk through it at least once first. Never taken apart a theme.
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
Yes Odin please.
Sent from my SCH-I535 using xda premium

Cool. I have no problem with waiting. I edited the fingerprint line in build.prop so I won't be hassled by the update. My phone runs fine.

You can only dump the LTE radio, you won't be able to get a dump of the CDMA radio.

imnuts said:
You can only dump the LTE radio, you won't be able to get a dump of the CDMA radio.
Click to expand...
Click to collapse
Is there a new kernel with FP5 & will you update your own kernel fork with it? I found out that http://opensource.samsung.com has FP5 as SCH-I510-VZW_GB_Opensource_Update2.zip available.

I've returned to stock and then taken the OTA and can't seem to keep my root or cwm recovery. sooo im going to have to edit my build prop until there is a root fix for this.

buhlerbuhler said:
I've returned to stock and then taken the OTA and can't seem to keep my root or cwm recovery. sooo im going to have to edit my build prop until there is a root fix for this.
Click to expand...
Click to collapse
There's a certain file that checks if your recovery "needs" to be overwritten by stock, and all you need to do is change permissions on that file. For the life of me I can't remember what it is though.
I would imagine that would help you with your root too.
Sent from my SCH-I510 using xda premium

kvswim said:
There's a certain file that checks if your recovery "needs" to be overwritten by stock, and all you need to do is change permissions on that file. For the life of me I can't remember what it is though.
I would imagine that would help you with your root too.
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
install-recovery.sh
Sent from my SCH-I510 using xda app-developers app

Reilly1812 said:
install-recovery.sh
Sent from my SCH-I510 using xda app-developers app
Click to expand...
Click to collapse
In /system/etc/

Wifi error after update

Hello.
I recently bougth a SGS4G, it came with the original 2.2.1, and every thing worked fine.
I started to read about de updating the rom and got interested, after reading, I made de update using the one-click metode. I used the Stock_KJ6_+_root-One-Click.jar, it all went just fine, the phone run smoth, but when I tried to turn on the wifi connection every single time it gives the error message.
Does any one have any ideia on how to solve this problem?

Try it again, you may have had a bad download.

What error message are you seeing?
Posted from my SGS4G, thanks to Team Acid development

HrCorreia said:
Hello.
I recently bougth a SGS4G, it came with the original 2.2.1, and every thing worked fine.
I started to read about de updating the rom and got interested, after reading, I made de update using the one-click metode. I used the Stock_KJ6_+_root-One-Click.jar, it all went just fine, the phone run smoth, but when I tried to turn on the wifi connection every single time it gives the error message.
Does any one have any ideia on how to solve this problem?
Click to expand...
Click to collapse
airfluip1 said:
Try it again, you may have had a bad download.
Click to expand...
Click to collapse
No its not a bad download. He used my oneclick and wifi is broken because blastoff uses the bcm4329 module.
HrCorreia use the kernel in this thread. Just flash it in cwm. Your wifi should be fixed after that. If not post back and Ill see what I can do to help.
http://forum.xda-developers.com/showthread.php?t=1828171&highlight=blastoff

jeffsf said:
What error message are you seeing?
Posted from my SGS4G, thanks to Team Acid development
Click to expand...
Click to collapse
When I try to turn on the wifi connection, it always shows the message saying "error" on the connection status.
eollie said:
No its not a bad download. He used my oneclick and wifi is broken because blastoff uses the bcm4329 module.
HrCorreia use the kernel in this thread. Just flash it in cwm. Your wifi should be fixed after that. If not post back and Ill see what I can do to help.
http://forum.xda-developers.com/showthread.php?t=1828171&highlight=blastoff
Click to expand...
Click to collapse
I'll try that.

I faced same problem previously.. i fixed that by Reflashing the rom & root it again...
Sent from my GT-I9003 using Tapatalk 2

I'll have a fix for the oneclick tonight.

Thanks bhundven Ive been busy all weekend and when I have gotten home fixing that one click has been the least of my thoughts. I know bad eollie no cookie.

eollie, I didn't know he was using blastoff.

airfluip1 said:
eollie, I didn't know he was using blastoff.
Click to expand...
Click to collapse
Its all gravy man, I just happened to notice the name of the one click he used. Its was the one click I created to get root plus stock for coming back to stock. Ive known about the broken wifi I think I even spoke about it in the OP.

Thanks to all who tried to help me, and in fact realy helped me.:laugh::good:
I hope this topic manage to help others.

eollie said:
No its not a bad download. He used my oneclick and wifi is broken because blastoff uses the bcm4329 module.
HrCorreia use the kernel in this thread. Just flash it in cwm. Your wifi should be fixed after that. If not post back and Ill see what I can do to help.
http://forum.xda-developers.com/showthread.php?t=1828171&highlight=blastoff
Click to expand...
Click to collapse
You are a life saver friend

eollie said:
Thanks bhundven Ive been busy all weekend and when I have gotten home fixing that one click has been the least of my thoughts. I know bad eollie no cookie.
Click to expand...
Click to collapse
Eollie - did you ever update the OneClick?
Just curious because just tonight I flashed your OC... or the top one in this thread:
http://forum.xda-developers.com/showthread.php?t=1358498
Downloaded it fresh today. "Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2.5 kernel)"
Anyway, the wifi wasn't working. I flashed AntonX's BwaT kernel to get it back.
Am I missing something?
Thanks!
----
Related: I would've loved to flash straight to Valhalla Black but even though I found a post where VB built an experimental One Click for that, I couldn't actually find a JAR anywhere. Am I missing something here too? Apparently FB isn't accepting PMs....

I'm not sure why you're looking for one-click installers for everything. The typical way to install is using a zip in recovery. You should be able to find a good selection of ROMs and kernels that you can flash from the recovery that it sounds like you already have installed.
The one-click installers are generally when you have things so hozed up you need to get back to a relatively clean, know state. They generally aren't for getting a fully functional phone. Your WiFi problem is likely the driver that matches your kernel not being installed.
FB is around from time to time.
In general, I wouldn't hold your breath on anyone updating software from a couple years ago. Older projects eventually get archived or deleted as each ROM build you are working on can take 50 GB or more.
---
Posted from whatever phone booted today

Phone was super hosed. Would not restore a Nandroid backup.
A VB one-click would have been fastest.
Would gladly try a newer ROM but my wife and I use wifi-calling every day - until and unless somebody with a newer ROM figures that out, we're on GB.
jeffsf said:
I'm not sure why you're looking for one-click installers for everything. The typical way to install is using a zip in recovery. You should be able to find a good selection of ROMs and kernels that you can flash from the recovery that it sounds like you already have installed.
The one-click installers are generally when you have things so hozed up you need to get back to a relatively clean, know state. They generally aren't for getting a fully functional phone. Your WiFi problem is likely the driver that matches your kernel not being installed.
FB is around from time to time.
In general, I wouldn't hold your breath on anyone updating software from a couple years ago. Older projects eventually get archived or deleted as each ROM build you are working on can take 50 GB or more.
---
Posted from whatever phone booted today
Click to expand...
Click to collapse

Gingerbread is cool, especially if you need the proprietary WiFi calling feature. Several of us have poked at those bits and they aren't very happy with anything but the ROM they were built for.
You'll typically have problems if you flash a kernel through download mode "over" an existing ROM. Download mode is partition-at-a-time so it can't, for example, update kernel modules on that are on the same partition as the rest of the ROM.
Lots to pick from once you have custom recovery going.
---
Posted from whatever phone booted today

Back to the original question though - did Eollie or anyone update the kernel in the Rooted/stock one-click so that Wifi works? Maybe it was just a fluke that it didn't work for me?
(I'm asking for the next guy...)

JaimeZX said:
Back to the original question though - did Eollie or anyone update the kernel in the Rooted/stock one-click so that Wifi works? Maybe it was just a fluke that it didn't work for me?
(I'm asking for the next guy...)
Click to expand...
Click to collapse
I think bhundven made a fixed version and put it in the....this thread
http://forum.xda-developers.com/showthread.php?t=1358498
Sent from my Nexus 5 using XDA Premium 4 mobile app

TwitchyEye said:
I think bhundven made a fixed version and put it in the....this thread
http://forum.xda-developers.com/sh...read.php?t=1822626"]AntonX's BwaT + Stock Rom[/COLOR][/SIZE]
Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2.5 kernel)
Click to expand...
Click to collapse
...downloaded 24 Feb '14, but wifi didn't work afterwards. Had to flash the BwaT kernel.

bhundven said:
And done. The second post has been updated with the new oneclick.
This fixes wifi and removes the csc update. Enjoy!
(note, after rebooting it does go to recovery, so you can flash after oneclicking)
Click to expand...
Click to collapse
I see. Maybe he just made it boot to recovery instead so you still have to reflash the kernel.
Sent from my Nexus 5 using XDA Premium 4 mobile app