I have been playing about with roms and what not but I have noticed something a little odd.... before s-off my 3g data connection was working fine with a decent speed I flashed a few roms but noticed the lack of 3g internet connection (I was there running on hspa but very very slow) I was running the stock radio with a custom rom... I am now using insert coin 2.1 with the reccomended radio (Non stock) but the same problem is there, calls texts ect are fine internet is stupidly slow...
There are a few ppl on Vodafone Uk here so I would like to hear how you guys are getting on, roms and radios you are using.... its nit a lack of signal as I have full 3g signal and a signal booster (Vodafone sure signal)
bumpety bump
Data is just plain slow anyway on the sensation.
but it has never been this slow
Related
I've recently got a new 3G iphone. It came with a new SIM card that is suppose to be optimized for iphone. When I put this sim card into my Touch Cruise, I am unable to get 3G. There is signal bars but I cannot make or receive phone calls. The only way to make or receive phone calls is by disabling the 3G. The same applies for Data. I thought maybe the radio ROM was not working so I changed it to the Murata ROM but I am still having problems. I am on the Rogers network in Canada. Has anybody else having similar problems? Any help would be appreciated as I still find my Touch Cruise more useful than the 3G iphone.
Most probably is ur phone broken. U will have to send it to the service. Maaaaany users had/have/will have problems with calls, connections, signal strenght,bluetooth, camera, broken wheel etc. I had... Touch cruise is crapy.
If you know someone with a non-iPhone 3G sim, try theirs in your Cruise and see what happens
benjimen said:
If you know someone with a non-iPhone 3G sim, try theirs in your Cruise and see what happens
Click to expand...
Click to collapse
Actually, I did this today. Same thing happen. I would get a 3G signal but when I tried to make a call, I get no signal. But when I disable the 3G, edge works fine with voice and data.
Hi, I sufered the same problem until yesterday. I had the same problems. Yesterday I switched off the HSDPA switch in the software, after a soft reset the TC came back online. Probably worth trying?
Gr. WAS
As good as it gets here is a link to an solution
http://forum.xda-developers.com/showthread.php?t=389601
Succes, WAS
WAS said:
As good as it gets here is a link to an solution
http://forum.xda-developers.com/showthread.php?t=389601
Succes, WAS
Click to expand...
Click to collapse
I've tried both Murata radio roms. Both gives very good 3G signal but when I try to make a call or use data, I get no connection. I've tried the original radio ROM and some of the Kaiser ported radio Roms. They all give me no connection with 3G. In every case, when I disable the 3G, I can make calls and get data although it is only through edge and GPRS. I looked at my box for the TC and it is revision A. Do I need to send my TC for repair? I even went as far as calling my cell phone provider(Rogers) and they couldn't help me. The phone is functional but without 3G I am not getting very fast data speeds.
The problem started with my TC started after upgrading to Udk R6 and R7, after upgrading to R8 and a new radio version
http://forum.xda-developers.com/showthread.php?t=351964
Will give you an updated radio version what will have a good match with the Udk diamond R8 Rom.
Succes, WAS
just a question, I'm on ATT, and the sim card I use on my polaris came off the iPhone3G, and I get the H (the high speed thing) sign on the phone during data sessions. on some areas I'm only able to get E and sometimes even the G sign came on and off. so I guess, maybe wherever you are, the 3G signal isn't strong enough, so you can only get edge.
and as of the other person noted, polaris is kind of at the edge of getting broken, fast. I only uses mine exclusively for web browsing for a week when the phone goes crazy. sent it to repair and everything seems to be in "sane" mode now let's hope that my phone didn't try to go insane again
rycckor said:
I've recently got a new 3G iphone. It came with a new SIM card that is suppose to be optimized for iphone. When I put this sim card into my Touch Cruise, I am unable to get 3G. There is signal bars but I cannot make or receive phone calls. The only way to make or receive phone calls is by disabling the 3G. The same applies for Data. I thought maybe the radio ROM was not working so I changed it to the Murata ROM but I am still having problems. I am on the Rogers network in Canada. Has anybody else having similar problems? Any help would be appreciated as I still find my Touch Cruise more useful than the 3G iphone.
Click to expand...
Click to collapse
I am having the same problem, 2 weks ago I traveled to other country without 3g network (only edge) and i had used a diferents simcards. When I come back to my country, I lost the 3g only works in GSM , I try another sims card and same problem and the orignal simcard in differnts mobiles 3gs worsk fine. Do you find any solutions? You are the only person who i find with the same problem.
Thanks
Edit/Delete Message
Guys, maybe a silly comment but did you check the following settings : phone/menu/options/band and check select network type to auto?
I have had problems before with 3G & HSDPA. Somtimes when your registered on HSDPA and you travell away from that mast/area into an area that only has 3G or even only Edge, then device does not re-register onto the other band and you will not be bale to make calls and will miss calls. This happened for days one time and i very nearly hard reset my device in frustration, i eventually found out it was a network problem.
Another work around is going to phone/menu/networks and manually select networks and hopefully it should bring up your 3G network.
Phone operators do not like telling you that their 3G or HSPDA networks do not have good coverage or intermittent quality of signal. My 3G network only has 70% coverage & 30 % of that is HSDPA, so i sometimes end up on EDGE and hence miss calls.
Try playing around with the setting above one at a time. When im stuck i manually set band to GSM (edge), then when travelling away reset back to auto. Most of the time however it is fine.
Hi, I'm from Argentina. I had the same problem with 3G after a trip to other country. Now my TC only works well in GSM Band. Unfortunatelly we don't have service support here so if anyone knows how to fix this will be highly appreciated.
I have the same problem in my Polaris. I tried almost every radio i could find, i tried with different sim cards, i tried with official wm6 and wm6.1 roms with no result. When 3G is enabled i can not make or receive calls. I think that the problem started when i first upgraded from WM6 to WM6.1. Now i keep band selection to GSM so at least i can use my polaris as a phone. There must be something that prevents gsm connection when 3G is active. I hope a registry tweak could be found for this. I' m just one step from sending my device to be serviced.
I have the same trouble with my virgin uk sim card and t-mobile which share the same network(need to turn off 3g),but no trouble with my asda sim which uses the vodaphone network.So if you try different sim cards make sure they dont share networks.Another thing i've noticed with my virgin sim is all my preferred networks are unchecked but my phone will still connect if my 3g is turned off?
Okay so on CM7 my WiFi signal is just way weaker than it should be. I'm in the room right next to my router, and I have like half of a WiFi signal...On every Sense ROM I've tried (and the stock ROM), my WiFi works perfectly fine, yet on CM7 it's complete garbage...Does anybody know how I might solve this problem? Somebody suggested I try a new radio. I had been using stock, but I flashed the Telus radio and it was exactly the same. Also, why doesn't CM7 have an option to use like Advanced WiFi or w/e (where it works better but uses more battery, it's an option in the stock ROM)?
I'm on CM7 also but my WiFi is the same on this as it was on CoreDroid and stock ROM. I had the Atrix prior to the Inspire and will say the WiFi on that phone was annoying. I could stand right near my router and I'd have 1 bar of WiFi like really?
My Wifi was great on coredroid and inspiredsaga, buy not cm7 for some reason
Ferrari353 said:
My Wifi was great on coredroid and inspiredsaga, buy not cm7 for some reason
Click to expand...
Click to collapse
That's strange. Does it run slower or just show less signal? If it runs at little to no noticeable difference is it a big deal?
I'm not sure because I don't really browse the web on my phone through wifi, I usually only download Apps and whatnot.
I'm not sure if it's slower, but I lose connection sometimes. I'll be downloading something and it will say "connectivity lost. rety?"
Sent from my Inspired 4G using XDA App
Ferrari353 said:
Okay so on CM7 my WiFi signal is just way weaker than it should be. I'm in the room right next to my router, and I have like half of a WiFi signal...On every Sense ROM I've tried (and the stock ROM), my WiFi works perfectly fine, yet on CM7 it's complete garbage...Does anybody know how I might solve this problem? Somebody suggested I try a new radio. I had been using stock, but I flashed the Telus radio and it was exactly the same. Also, why doesn't CM7 have an option to use like Advanced WiFi or w/e (where it works better but uses more battery, it's an option in the stock ROM)?
Click to expand...
Click to collapse
Are you checking signal strength in decibels or just bars? Decibels is the only way to make a fair comparison. Some ROMs may have a different bar/decibel ratio. 4 bars on one ROM might be 3 bars on another for the same given signal strength.
FWIW a couple of weeks ago I was curious if different ROMs affected signal strength. I tried rooted stock, CoreDroid, TPC, CM7 and Ultimate Droid and noticed no change in decibel signal strength. Wifi Analyzer and Network Signal are two such apps that will show decibels. Be sure to measure signal strengths in the EXACT same spot and take an average of signal strength (as they will vary a few dB normally).
One thing I noticed since switching to CM7 is that my signal strength is more accurate. My laptop shows 3-4 bars when I have it right next to my phone, and on the stock Sense ROM I was showing max signal. Now on CM7, I get 3-4 bars of Wi-Fi signal strength, so I think it's all a matter of how it measures. If you are seeing serious performance issues, then that's a different matter.
FWIW, I have not seen any Wi-Fi performance issues between CM7 and stock ROM.
I had the same issue with CM7.
At one end of my house, one or zero wifi bars with CM7. Kept flip-flopping between wifi and 3G, disrupting use.
With stock ROM or TPC Stock Optimized at the same location, phone gets one or two wifi bars and I can surf without the phone flip-flopping between wifi and 3G.
knarfl1 said:
I had the same issue with CM7.
At one end of my house, one or zero wifi bars with CM7. Kept flip-flopping between wifi and 3G, disrupting use.
With stock ROM or TPC Stock Optimized at the same location, phone gets one or two wifi bars and I can surf without the phone flip-flopping between wifi and 3G.
Click to expand...
Click to collapse
That is just a slight radio mismatch issue between CM7 and whatever radio you're using (it sounds like you're using the stock radio). I had the same thing happen to me using CM7 with the stock radio. This radio is fine for a lot of ROMs, and it gets good signal strength, and phone calls were no problem, but using CM7 in 1-2 bar wifi strength areas it would flip between wifi and cell data way more than it needed to. Flashing to radio 12.48.60.23U_26.08.04.07_M3 and flashing the RIL file HTC-RIL_2.2.1003G fixed this problem for me. Now the phone stays locked onto weaker wifi signals much better.
I read somewhere on this forum yesterday that one of the new nightlies for CM7 is going to have a different RIL in it; maybe it will address problems like this.
same here
i was having issues with my wifi and signal bars w/cm7 also, so i just switched to ace.
I have a rooted stock g2x. I tried scanning the set cpu barcode on here and it downloaded. I opened rom manger and the phone restarted but I don't see the app. Did I do something wrong?
Also I'm trapped in my contract and have NO 3g/4g in my area. Is there a way I could unlock my phone and roam other networks? (I have my phone set to data roaming with zero success) Or is AT&T 3g in a diff freq band? Also are there any benefits to changing my baseband ?
Would I still be able to make wifi calls if I used CM7? Is CM7 more stable than stock froyo?
Thanks in advance
TMO 3g and "4g" are different frequencies than ATT and other carriers in the US, so there is no way to mod the phone to use them. I'm not an expert but messing with the baseband seems to be a recipe for disaster based on my browsing of this forum.
Also I recently went from stock to Eagles Blood 2.2 which is based on cyanogen. Wifi calling works fine. SMS works fine, however mms over wifi doesn't seem to work, its a known issue. Overall the rom is noticeably faster plus there are additional options and eye candy available.
So I run a couple of different roms almost all with the same issure that when 3G is shown, it will not download a single drop of data, but it will download on 2g and H...I have run a couple of different roms and I am now on CM7, but was wondering if there was a quick fix for this. I have tried it in different markets, but not success.
I still get calls and can make calls tho when 3g is displayed.
Hope this isnt a dumb question!
Sensation doesn't have 3g antenna/frequency.... 4g or edge is what you get
I´ve read in a few forums out there that sometimes there are signal issues with this model when is used outside US, in my case most of the time my phone only has 3 signal bars (sometimes 1 or two bars but only for a few seconds), when I recieve or make a call suddenly I get all 5 bars this only happens with that phone, every other one in the house gets full reception, by the way I dont have mobile internet I only use cell reception to make and recieve calls and use wifi for internet.
After reading a lot about this Im guessing I need to try and flash a different radio, so my real question is which one? My provider is Claro (Huge cell provider in Latin America, but I guess you guys know that ) . And one last thing, this one is a newbie question, Can I flash a radio on a rooted stock JB firmware? I updated with kies.
Because when you make a call it switches to hspa.
You would have to try all the radios to see which one works best in your area.
Sure you can flash a radio as long as you have a custom recovery.
Sent from my HTC One using Tapatalk 4