any chance to run sixaxis controller? - LG Optimus 3D

Hi, is any chanse to run sixaxis controller http://forum.xda-developers.com/showthread.php?t=1211805 on lg optimus 3d?

I tried this a few days ago, I get the missing protocol error (so not possible with the bluetooth stack), running stock (rooted) ROM

mmace said:
I tried this a few days ago, I get the missing protocol error (so not possible with the bluetooth stack), running stock (rooted) ROM
Click to expand...
Click to collapse
I get the some error, hopply CM will be compatibile

i've tried it on my lg running ThiaiZO3D V2.7.1 GB.
No Chance.
I can't post it on the development thread :/ so please thiai! Please do something that sixaxis runs on LGO3D!

good news
You can use it with cm

ya but cm is very buggy, isn't it?

I thought only HDMI is buggy and there is no 3d
but as I know there are only "little" bugs
---------- Post added at 06:55 PM ---------- Previous post was at 06:28 PM ----------
lynn0r said:
i've tried it on my lg running ThiaiZO3D V2.7.1 GB.
No Chance.
I can't post it on the development thread :/ so please thiai! Please do something that sixaxis runs on LGO3D!
Click to expand...
Click to collapse
The problem is in gingerbread because gingerbread
doesnt support bluetooth input devices and it was added
in cyanogenmod 7 (ricardo told me)

sorry to be the voice of doom
I already asked the creator of the app about if this was possible to port this to froyo/GB and this is what he told me.....
sir_earl said:
The problem isn't so much with Froyo or Gingerbread, but more specifically with LG. I have managed to make some LG devices work (such as the Optimus 2x), but unfortunately the bluetooth chip in the LG Thrill is different and the stack LG is using is very limited. It would certainly be possible to port the stack from CM7 over to the stock rom, but whether or not that will ever happen depends on the dev community behind the LG Thrill.
Regards,
Earl
Click to expand...
Click to collapse

sketch2k278 said:
I already asked the creator of the app about if this was possible to port this to froyo/GB and this is what he told me.....
Click to expand...
Click to collapse
It's possible then. Only someone has to figure out how. Is it really that difficult to get the bluetooth related files/drivers/whatever from the CyanogenMod and make it an installable zip package which then we can use to flash over a stock rom?

Related

[DEV][PORT][10/08/11]Gingerbread 2.3.4 from Optimus Net

Now anything seems to work:
working fm radio
working bluetooth
working gps
working sensors
working wifi
working camera
working calls
working data
working touchscreen
ROM:
http://www.multiupload.com/VNXVZCGSMG
configuration:
Baseband: V20C Optimus One
Kernel: V20C original for Optimus One
Libraries: (???)))
ROM: V10A for Optimus Net)
Thanks to:
Matteof93
Hecatae
(do i forget anyone?)
gianvolpe said:
Hi guys, i'm trying to port gingerbread 2.3.4 from optimus Net to O1. But i need help
Now i have a working rom but WIFI, Bluetooth and Camera don't work, can anyone help me?
this is the rom:
http://www.multiupload.com/GUV0V4BXM4
Known issues:
Wifi doesn't work
Camera doesn't work
Bluetooth doesn't work
configuration:
Baseband: V20C Optimus One
Kernel: Paolo70M for Optimus One
Libraries: Gingerbread 2.3.4 V10A for Optimus Net (only libril-qc-1.so from O1)
ROM: V10A for Optimus Net)
Click to expand...
Click to collapse
Interesting, are there any striking features of this ROM? Or is it pretty much just the stock firmware of the Optimus NET?
currently is the stock rom of ONet. But after solving issues i want improve it
gianvolpe said:
currently is the stock rom of ONet. But after solving issues i want improve it
Click to expand...
Click to collapse
great gianvolpe! now i'm busy with my port of AOSP rom....but if i found something that can help you i'll keep in mind!))
p.s W avellino!
Are the sources of that thing released? Maybe it has some improvements in drivers and kernel that we could use
gianvolpe said:
Hi guys, i'm trying to port gingerbread 2.3.4 from optimus Net to O1. But i need help
Now i have a working rom but WIFI, Bluetooth and Camera don't work, can anyone help me?
this is the rom:
http://www.multiupload.com/GUV0V4BXM4
Known issues:
Wifi doesn't work
Camera doesn't work
Bluetooth doesn't work
configuration:
Baseband: V20C Optimus One
Kernel: Paolo70M for Optimus One
Libraries: Gingerbread 2.3.4 V10A for Optimus Net (only libril-qc-1.so from O1)
ROM: V10A for Optimus Net)
Click to expand...
Click to collapse
Camera doesnt work cuz different pixel? Like us 3.0 and theirs 5.0?? Correct me if i am wrong... Have u tried franco .35 kernel?
Sent from LGE XDA phone
dax4182 said:
Camera doesnt work cuz different pixel? Like us 3.0 and theirs 5.0?? Correct me if i am wrong... Have u tried franco .35 kernel?
Sent from LGE XDA phone
Click to expand...
Click to collapse
Our camera is 3.0 Their camera is 3.0
It's different hw.
mprou said:
Are the sources of that thing released? Maybe it has some improvements in drivers and kernel that we could use
Click to expand...
Click to collapse
the source of kernel and Original Rom of O1 yes, logically the source of ONet NO!
dvdauricchio said:
Our camera is 3.0 Their camera is 3.0
It's different hw.
Click to expand...
Click to collapse
i think the problem is in the libraries, but i don't know in which libraries
dvdauricchio said:
Our camera is 3.0 Their camera is 3.0
It's different hw.
Click to expand...
Click to collapse
Hmmm... Dunt have to be angry... Try replacing camera.so and anything to do with camera... Have u tried the kernel?
Sent from LGE XDA phone
dax4182 said:
Hmmm... Dunt have to be angry... Try replacing camera.so and anything to do with camera... Have u tried the kernel?
Sent from LGE XDA phone
Click to expand...
Click to collapse
now i'm testing the official kernel of O1, but nothing, if i have time i try to change libraries
Good luck to you. Hope a lot of people can benefit from this rom. Optimus net is quite similar to o1 and supposed to be the successor of o1.
Out of curiosity I had downloaded and flashed this rom when you mentioned it in Andy's thread.
There were a little micro lags apart from the bugs you mentioned. I didn't try to change the baseband so I didn't have the GSM as well.
Official launcher seemed to be very good. Slide the block above is also cool. Neocore was almost same i. e 52 and 53 at 600 and 806 mh respectively. Quadrant advanced was 1250.
I didn't have much time to test further. So restored my Nand backup.
BTW, have you tried changing some other libs e.g. there are 3 libs related to camera? Wait for true developers to see and answer your problem.
Sent from my LG-P500 using Tapatalk
lekhwani said:
Good luck to you. Hope a lot of people can benefit from this rom. Optimus net is quite similar to o1 and supposed to be the successor of o1.
Out of curiosity I had downloaded and flashed this rom when you mentioned it in Andy's thread.
There were a little micro lags apart from the bugs you mentioned. I didn't try to change the baseband so I didn't have the GSM as well.
Official launcher seemed to be very good. Slide the block above is also cool. Neocore was almost same i. e 52 and 53 at 600 and 806 mh respectively. Quadrant advanced was 1250.
I didn't have much time to test further. So restored my Nand backup.
BTW, have you tried changing some other libs e.g. there are 3 libs related to camera? Wait for true developers to see and answer your problem.
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
little micro-lags are caused by opensource libraries (gralloc) that lg uses for render 2D instead of rewrite herself for our device.....Opensource libraries are slowest!!!!
could someone try ripping the launcher and try it on our optimus one in roms like official gingerbread
Sent from my LG-P500
this looks great, is faster then official 2.3 for LG O1 and the new UI is faster too, please make wi-fi work, this is all I need, pls pls pls
This rom is much faster, fairer and more practical than the official rom 2.3 for Optimus One
Please repair the WIFI and it would be great,
and yet there is a bug in the gallery preview images appear quite small and almost invisible
terratrix said:
could someone try ripping the launcher and try it on our optimus one in roms like official gingerbread
Sent from my LG-P500
Click to expand...
Click to collapse
cyanogen matt has stock gb launcher.
mathew3184 said:
cyanogen matt has stock gb launcher.
Click to expand...
Click to collapse
not stock gingerbread launcher, stock optimus net launcher, which looks like this:
http://www.mobilephonesarena.com/images/lg-optimus-net-p690-big.jpg
hey I got a big problem I flashed this rom but when it boots gives me a FC on Lg Setup and i can't open anything except the status bar please help meee
LG repairs the mistakes with this ROM, please fix the issues, please...please

best rom

Hi.I'm not new in flashing roms. I was a xpria x10 user before.
I recently bought this and found it to be buggy. Messaging fc alot of times.
So was hopng someone could lead me on how to make our.dual core processor phones work. The way its supposed to.
Questions:?
Are there better roms that I could.flash
I love touchwiz layout but it lags alot, any work around? ?
TiA
Stock Honeycomb is what almost everyone here runs as a daily driver. Until we get the source for the WIFI chip we are stuck. There are deoxed versions of stock in the developer area.
cm9 alpha best thing right now in my opinion.
painter_ said:
Stock Honeycomb is what almost everyone here runs as a daily driver. Until we get the source for the WIFI chip we are stuck. There are deoxed versions of stock in the developer area.
Click to expand...
Click to collapse
Where do I get this?
And how do I install it?
Anyone experiencing frequent messaging crashes as well?
Sent from my GT-P6200 using XDA
dude,he mentioned about stock honeycomb cause of this is a galaxy tab plus section,evryones waiting for ics and cm9.gingerbread and honeycomb are cool, ICS is where their heading to.
---------- Post added at 06:29 PM ---------- Previous post was at 06:14 PM ----------
Justinhopaolo said:
Where do I get this?
And how do I install it?
Anyone experiencing frequent messaging crashes as well?
Sent from my GT-P6200 using XDA
Click to expand...
Click to collapse
check it here: forum.xda-developers.com/showthread.php?t=1592078
Justinhopaolo said:
Where do I get this?
And how do I install it?
Anyone experiencing frequent messaging crashes as well?
Sent from my GT-P6200 using XDA
Click to expand...
Click to collapse
Stock Honeycomb is what your tab comes with out of the factory therefore you can't get it anywhere as you already have it. The only other ROM avaiable that you could use on a daily basis is the deodexed version of Stock Honeycomb in the development section. If you don't know what deodexed is google it. However there is very little benefit to flashing this ROM over just sticking to stock in my opinion.
The best....
The best you can is to install the ICS look of this device by installing some items but remember to be a root. Here is the link where you can find more information to do that:
http://forum.xda-developers.com/showthread.php?t=1430480

CyanogenMod 2012-05-27 Works with 2012 Baseband

I can confirm that nightly 2012-05-27 build works with March 2012 Baseband.
I am able to make calls.
Download here
http://download.cyanogenmod.com/?type=nightly&device=p999
Not that I don't trust OP, but has anyone else had success with the latest nightly?
It works, RC3 and Nightly 5/27 both have calling working with the March 2012 baseband
I have confirmed this before. Honestly I though it was public knowledge already.
Like I said in another thread, Ricardo accidentally fixed the radio since rc3, until we here otherwise, any release beyond rc3 will work with new bb
[email protected]
mustangtim49 said:
Like I said in another thread, Ricardo accidentally fixed the radio since rc3, until we here otherwise, any release beyond rc3 will work with new bb
[email protected]
Click to expand...
Click to collapse
I'm more concerned about rc3 working with the old basebands... hopefully rc4 will work with both if that's a possibility. I'm no dev so I don't have any insight as to whether its even possible but here's to hoping
Pin it to Win it.
I guess now I can upgrade to the new baseband.
CM7 is my favorite ROM variant.
I'd care about the ICS Roms but I don't really. I use the camera on the phone ALOT.
I'll upgrade eventually but will hold on to my old BB.
I.R.Chevy said:
I'm more concerned about rc3 working with the old basebands... hopefully rc4 will work with both if that's a possibility. I'm no dev so I don't have any insight as to whether its even possible but here's to hoping
Pin it to Win it.
Click to expand...
Click to collapse
id be more concerned about the old ROMs working with the new baseband. i like having working GPS lol but having the ability to switch basebands and still make phone calls would be nice. i just hope RC4 fixes BT calling. i dont wanna get a ticket.
BuddhaTeh1337 said:
id be more concerned about the old ROMs working with the new baseband. i like having working GPS lol but having the ability to switch basebands and still make phone calls would be nice. i just hope RC4 fixes BT calling. i dont wanna get a ticket.
Click to expand...
Click to collapse
True story. I have given up on flashing new basebands on this wind phone cause my antenna has always been fine...
Pin it to Win it.
I just moved to nightly 0527 and March 2012 baseband today as well.
I wonder if ICS kangs that are synced to source within the last few days will include this capability.
---------- Post added at 11:32 PM ---------- Previous post was at 11:31 PM ----------
I.R.Chevy said:
I'm more concerned about rc3 working with the old basebands... hopefully rc4 will work with both if that's a possibility. I'm no dev so I don't have any insight as to whether its even possible but here's to hoping
Pin it to Win it.
Click to expand...
Click to collapse
Are you saying RC3 does NOT work with the old baseband?
r4d14n7 said:
I just moved to nightly 0527 and March 2012 baseband today as well.
I wonder if ICS kangs that are synced to source within the last few days will include this capability.
---------- Post added at 11:32 PM ---------- Previous post was at 11:31 PM ----------
Are you saying RC3 does NOT work with the old baseband?
Click to expand...
Click to collapse
Yes, it will NOT WORK with July BB
[email protected]
@r4
To my knowledge rc3 works with the new bb and not the old ones.
Pin it to Win it.
where did you find the new baseband upgrade? LG took it off the website.
Nevermind... found it
TarHeelTrigger said:
where did you find the new baseband upgrade? LG took it off the website.
Click to expand...
Click to collapse
I updated via LG Mobile Support tool last night.
TarHeelTrigger said:
where did you find the new baseband upgrade? LG took it off the website.
Nevermind... found it
Click to expand...
Click to collapse
check out this guide. it shows how to update through LG update tool and gives link.
http://forum.xda-developers.com/showthread.php?t=1674901

Good News for SU760 Users

Good news for SU760.
I have successfully converted the P920 rom to work on my SU760.
Why I did this, since there is already an existing modified rom for SU760? I don't like the korean rom for su760, that's why i converted the rom for p920.
I have tested the XBSA ICS themed rom. It works perfectly, no bugs as of now. I know that this technique will also work with some other roms for p920.
I have to ask permissions first to all the devs for p920 roms if it's ok for them. I will also try to make an update zip for easy converting (hope it will work)
sorry for my bad english.
UPDATE:
I just converted and tested the Promethius Rom V1.5 20F for P920 guess what? IT WORKS.!
Now I'm on testing on other roms for P920.
Another rom works to my SU760.
After converting the Acura 3D Max Rom, it works on my phone just like normal.
On testing with another one.
yeah that great
How do you do it please give some details. When I install P920 roms I get Inernel Memory card mounts issues plus buttons messed up back button works as search. Both of these problems solved with Bluekernel.
But there is one big problem that is camera gets flipped upside down. Please if you have figured out a way to fix it tell us. I'll be really grateful.
Thanks
Great! Bless ya
Hey! Great news dude! So when r u sharing? we are waiting u know
Sorry for the late update of this thread. I have been so very busy on my work. I even forgot to upload the converted roms.
I will try my best to get extra time to upload the roms.
I found a little bug on Promethius Rom V1.5 20F. When I use the USSD Code in dialer, I get force close on com.android.phone and it will also restart the GSM Network. I have a problems looking for the error in logcat. Hope someone could help me diagnose the problem to make it perfect. Thou this is not a big issue for me. i will also test the ussd code on XBSA and on some other roms that I have converted.
About the Official ICS for SU760, I will try to test it on my phone. But first I have to secure an Official gingerbread firmware for SU760 for backup purposes. Hope I can convert SU760 ICS to be use for P920.
Official ICS has bootloader lock so no CWM and no backup.
Sent from my LG-P920 using xda app-developers app
iodak said:
Official ICS has bootloader lock so no CWM and no backup.
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
have you tried it.? is it possible to go back to gingerbread after flashing ICS.?
I need official firmware or stock rom V20f for SU760, hope someone could provide a link to download.
There you go..
This is official SU760 V20F Gingerbread
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGSU760/ASKTDB/V20f_00/V20F_00.kdz
here are the converted ROM. --> http://forum.xda-developers.com/showthread.php?t=1871020
To those who bricked their P920, Can you still access CWM.? how about download mode.?
Samno cant get to recovery after flashing gb or froyo. Some user that flashed 20f korean can.
Edit: did you root it.
Sent from my LG-P920 using xda app-developers app
iodak said:
Samno cant get to recovery after flashing gb or froyo. Some user that flashed 20f korean can.
Edit: did you root it.
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
is your phone SU760.
yes my phone is rooted and it was V20F
reply
can someone please update this thread,i really really want to flash my su760 on any other su760 version just to root my phone.i almost did all the rooter tools for optimus 3d but none of them works...can anyone help me....?
chicknician said:
can someone please update this thread,i really really want to flash my su760 on any other su760 version just to root my phone.i almost did all the rooter tools for optimus 3d but none of them works...can anyone help me....?
Click to expand...
Click to collapse
what is your problem about SU760.? just try to search the whole forum about optimus 3d, im sure you will find answers to your problem. that's where I start, and I think almost all problems about software in optimus 3d has a fix.
And, Chickinican, if you are on Gingerbread (2.3.x) ROM, your best bet is Megatron block string attack. However, if you are on Ice Cream Sandwich (4.0.x) version, I would dig a bit more since this version is somewhat secure so different exploitation is necessary and required to give you root access.
Sent from my XT907 using xda premium
Dr. Mario said:
And, Chickinican, if you are on Gingerbread (2.3.x) ROM, your best bet is Megatron block string attack. However, if you are on Ice Cream Sandwich (4.0.x) version, I would dig a bit more since this version is somewhat secure so different exploitation is necessary and required to give you root access.
Sent from my XT907 using xda premium
Click to expand...
Click to collapse
thanks for the answer...i just root my su760 optimus 3d (version 2.3.6) with megatron root tool as you said.thanks it works..but the problem is when i installed droidvpn and load my tun.ko from tun.ko installer , everytime i open up my droidvpn it keeps my phone reboots. but when i removed the tun.ko from my device.phone doesnt reboot and thats the issue for now tun ko is one of the droidvpn's requirements..someone can help me about this?it will be highly appreciated..
---------- Post added at 07:05 PM ---------- Previous post was at 06:44 PM ----------
just want to update my situation..i tried to flash the latest official firmware(ics 4.0.4) for optimus 3d (su760) using lgmobile support tool. and used root with restore by bin4ry.. thinking that this one will solve my problem.but nothing happen. it still reboots when i open up my droidvpn when the tun ko is loaded..now i downgraded my device with froyo 2.2.2 thinking that this one will help me too.but still the same.. can anyone please send me a link of the best and stable firmware for opdtimus 3d (su760).or any vpn that will make my internet free. ics 4.0.4 and froyo 2.2.2 doesnt have simtoolkit.
hi, i have LG SU760 2.3.6 want to add language (Indonesia), could you help me how to update? i have looking around for the correct firmware, but not sure...
any firmware that match for this phone?

Porting a rom

Im trying to port an aokp ics rom but it bootloops everytime. here is a logcat with the errors but i have no idea what it means......if someone could look into this for me and help me out it would be appreciated!
you probably replaced too many libs, are you porting from the Sensation?
xmc wildchild22 said:
you probably replaced too many libs, are you porting from the Sensation?
Click to expand...
Click to collapse
Yes from sensation. But I don't think I replaced any libs. But is there a better device to port from. I tried my4g and got same result except I couldn't get a logcat it kept repeating over and over.
http://forum.xda-developers.com/showthread.php?t=1630237
this is the guide i used. is there something i am missing?
i am getting no where with this......
ok i got this to boot!!!! but everything is crashing upon boot. error message: Unfortunately, the process com.android.phone has stopped. i replaced the libs from this rom with the ones from wildchild ice and it booted!!!! now to make it work........any guidence would be welcomed!!!:victory:
oh yeah here is my logcat:
out of curiousity, which aokp rom are you porting?
anitgandhi said:
out of curiousity, which aokp rom are you porting?
Click to expand...
Click to collapse
this one for now
http://forum.xda-developers.com/showthread.php?t=1766699
if i can figure this out i will try others
If you need any testers let me know
Sent from my myTouch_4G_Slide using Tapatalk 2
i am still stuck. after it boots it looks as if every app is force closing. the most persistant is the com.android.phone is not responding. if anyone knows a workaround for this it would be helpful
i wanted to use the new cm 9.1 as base for this rom but i got it working with wildchild ice as base so no keyboard. i will try a few more things to get this to work with cm 9!!!!!
I have just been informed that you cant port aokp onto a cm9 base. can anyone else confirm this?
mattlowry said:
I have just been informed that you cant port aokp onto a cm9 base. can anyone else confirm this?
Click to expand...
Click to collapse
I can't prove it one way or another but I DO know that WildChildIcE's last "daily" was AOKP but for him to fix the few remaining issues (one of them being the keyboard) he based his last "nightly" off of CM9 code. That's why "ROM Control" works in the daily but force closes in his nightly.
**You ought to give it another shot with his last nightly.**
WeekendsR2Short said:
I can't prove it one way or another but I DO know that WildChildIcE's last "daily" was AOKP but for him to fix the few remaining issues (one of them being the keyboard) he based his last "nightly" off of CM9 code. That's why "ROM Control" works in the daily but force closes in his nightly.
Click to expand...
Click to collapse
That sucks. But on the bright side I think I have this porting stuff down. It's pretty easy. Any cm9 based Roms you are interested in seeing on our phone. Until the keyboard is fixed on aokp I won't be trying those.....
Well, why not his last nightly then since you're already familiar with how it's put together? IMHO, you couldn't ask for a more fantastic ICS Rom to fine tune what you've learned on. There are a couple I'm aware of for the EVO 4G Supersonic that are very nice ROMs or would a Sensation Rom be a better suggestion given the hardware?
DUUH...nevermind the first part. LOL
WeekendsR2Short said:
Well, why not his last nightly then since you're already familiar with how it's put together? IMHO, you couldn't ask for a more fantastic ICS Rom to fine tune what you've learned on. There are a couple I'm aware of for the EVO 4G Supersonic that are very nice ROMs or would a Sensation Rom be a better suggestion given the hardware?
Click to expand...
Click to collapse
I sensation works haven't tried evo. I'm really noob at this so if something doesn't work I probably won't be able to fix it. But I am up for suggestions and I don't have permission to use anything yet.
And aokp without Rom control might as well be cm9
Yeah, that dawned on me about the same time I typed it. I'll look around a bit & see if I recognize anything that might look good on a DS.
mattlowry said:
That sucks. But on the bright side I think I have this porting stuff down. It's pretty easy. Any cm9 based Roms you are interested in seeing on our phone. Until the keyboard is fixed on aokp I won't be trying those.....
Click to expand...
Click to collapse
would ice cold sandwich work? although i'm not sure if it's a CM base or not, it does have CM components though.
---------- Post added at 09:58 PM ---------- Previous post was at 09:52 PM ----------
open sensation and pyromod are both cm9 based on the sensation, maybe those?
http://forum.xda-developers.com/showthread.php?p=30144519#post30144519
http://forum.xda-developers.com/showthread.php?t=1494373
anitgandhi said:
would ice cold sandwich work? although i'm not sure if it's a CM base or not, it does have CM components though.
---------- Post added at 09:58 PM ---------- Previous post was at 09:52 PM ----------
open sensation and pyromod are both cm9 based on the sensation, maybe those?
http://forum.xda-developers.com/showthread.php?p=30144519#post30144519
http://forum.xda-developers.com/showthread.php?t=1494373
Click to expand...
Click to collapse
I saw ice cold sandwich on mt4g it said aokp
mattlowry said:
i am still stuck. after it boots it looks as if every app is force closing. the most persistant is the com.android.phone is not responding. if anyone knows a workaround for this it would be helpful
Click to expand...
Click to collapse
You need to re-sign all the system apks. You probably mix and matched the frameworks & apps of the ROM you want to port. Some ROMs are too picky with signature verification in which all core system apks it has should have a matching signature & date signed.
---------- Post added at 11:23 AM ---------- Previous post was at 11:14 AM ----------
Also guys I have this ambitious project of porting Sense 4.5 jellybean ROM to our doubleshot
I believe I can do it(75% yes) problem is with resizing the apks to our device resolution. Anybody willing to collaborate with me? I'm really bad with graphics editing plus don't really have the time to edit thousands of xml files & images. But I believe I could port it's kernel to make it work with our devices.
So I'll be starting this project as soon as the kernel sources are released for the devices getting the updates.

Categories

Resources