Database Info

[Q] HTC Sensation 4G stuck. Won't boot. Bricked?

Hello,
I am having some trouble with my T-mobile Sensation 4G. I was trying to install a Rom and seemed to have failed. At this point it will not boot past the first white screen with the green HTC logo.
I can get it into fastboot and Clorkwork mod recovery. However, I am not really sure what to do.
I have tried superwipe and it fails. Bootloader screen is as follows:
-Revolutionary
Pyramid PVT SHIP S-OFF RL
HBOOT- 1.27.1100
RADIO- 11.22.3504.07_M
OPENADSP-V02.6.0.2226.00.0131
EMMC-BOOT
JAN 13 2012, 17:33:34
If I need to provide more information just let me know. Any help to get it back up and running would be great. I really appreciate your time and help.
Thank you in advance.

Most likely the rom will not boot on your current firmware. What rom is installed?
Option 1 is to restore a backup since you can access recovery.
Option 2 is to put the correct firmware on your SD using a PC, reinsert and let your phone update.
Sent from my HTC Pyramid using xda premium

stringer7 said:
Most likely the rom will not boot on your current firmware. What rom is installed?
Option 1 is to restore a backup since you can access recovery.
Option 2 is to put the correct firmware on your SD using a PC, reinsert and let your phone update.
Sent from my HTC Pyramid using xda premium
Click to expand...
Click to collapse
I don't think any rom is installed. It never got that far.
I first tried to update using this guide:
http://forum.xda-developers.com/showthread.php?t=1542192
However the update failed. After that the phone was just going into a reboot loop when I tried to start it up. I then tried to flash a new rom in the hopes it would fix whatever problem the first failure caused. I was following this guide:
http://forum.xda-developers.com/showthread.php?t=1098849
I was able to update the firmware from the linked page on that guide:
Firmware from 3.32.401.x & 3.32.401.10x RUU
I then tried to flash the Android Revolution HD 6.5.2 rom. It failed and when i tried to reboot it just hangs as described above. I tried to use superwipe and it also fails. I am sure at this point it is obvious I am lost.
Option 1 is not an option as I don't have a backup.
Option 2 may be an option, but I apparently don't know what the correct firmware is.....
Thanks again for the help.
I went back into fastboot and then recovery and tried to use superwipe, but that failed.
Option 1 is a no go because I do not have a backup.

Use this firmware instead.. it's worked well for me no matter which ICS rom I've installed..
Firmware from 3.24.401.1 & 3.25.401.101 RUU from http://forum.xda-developers.com/show....php?t=1412618
Don't get it confused with the one you've already tried. Then after you flash that version of the firmware, remove it from sdcard and flash a rom. It's worked for me as it should for you as well.. Hope this helped.. I'm also assuming that you've Super CID your device....
if this helped, slap the thanks button... thanks

Quakeworld said:
Use this firmware instead.. it's worked well for me no matter which ICS rom I've installed..
Firmware from 3.24.401.1 & 3.25.401.101 RUU from http://forum.xda-developers.com/show....php?t=1412618
Don't get it confused with the one you've already tried. Then after you flash that version of the firmware, remove it from sdcard and flash a rom. It's worked for me as it should for you as well.. Hope this helped.. I'm also assuming that you've Super CID your device....
if this helped, slap the thanks button... thanks
Click to expand...
Click to collapse
Thanks. I will give it a try and report back.

bigheed said:
I don't think any rom is installed. It never got that far.
Click to expand...
Click to collapse
So still on stock rom, ie Gingerbread, since 2x flashes have failed?
If so, 3.12 is the correct firmware to get it to boot.
Sent from my HTC Pyramid using xda premium

stringer7 said:
So still on stock rom, ie Gingerbread, since 2x flashes have failed?
If so, 3.12 is the correct firmware to get it to boot.
Sent from my HTC Pyramid using xda premium
Click to expand...
Click to collapse
I was not able to boot normally after installing this firmware, but it did allow me to complete the superwipe. That was failing beforehand. Once I was able to wipe the phone I was then able to install a rom. The phone is back up and running now. Thanks again for the help. I appreciate you guys taking the time.

bigheed said:
Hello,
I am having some trouble with my T-mobile Sensation 4G. I was trying to install a Rom and seemed to have failed. At this point it will not boot past the first white screen with the green HTC logo.
I can get it into fastboot and Clorkwork mod recovery. However, I am not really sure what to do.
I have tried superwipe and it fails. Bootloader screen is as follows:
-Revolutionary
Pyramid PVT SHIP S-OFF RL
HBOOT- 1.27.1100
RADIO- 11.22.3504.07_M
OPENADSP-V02.6.0.2226.00.0131
EMMC-BOOT
JAN 13 2012, 17:33:34
If I need to provide more information just let me know. Any help to get it back up and running would be great. I really appreciate your time and help.
Thank you in advance.
Click to expand...
Click to collapse
mine is not coming on at all..

Stuck at bootloader?

Well i just flashed cm10 by bruce
from my newly rooted and soff sensation h boot 1.27
and its been like 10 minutes and its still stuck at bootloader is this normal?

anthonyly said:
Well i just flashed cm10 by bruce
from my newly rooted and soff sensation h boot 1.27
and its been like 10 minutes and its still stuck at bootloader is this normal?
Click to expand...
Click to collapse
Well you should flash an extra thing in addition to the rom(and gaaps) if you are htc Dev unlocked...
If having 4EXT recovery then enable smart flash and flash the rom again
If any other recovery.. Then check for guide "flashing roms with SON " by asskickar in sensation general section and do extra #1 step from there
Sent from my HTC Sensation using xda premium

He said "s off HTC sensation."... Then it is not require to enable Smart flash manually .
May b this was due to bad download... , or due to not flashing additional files
Sent from my Sensation using xda app-developers app

I'm having the same problem!! Stuck on loading screen. Tried so wiping data, factory reset, installing a different ROM (Dragun's ROMs), but all result in the same problem now. What can I do?

Mikeparakh said:
I'm having the same problem!! Stuck on loading screen. Tried so wiping data, factory reset, installing a different ROM (Dragun's ROMs), but all result in the same problem now. What can I do?
Click to expand...
Click to collapse
S-ON or S-OFF?
what recovery do you have?

rzr86 said:
S-ON or S-OFF?
what recovery do you have?
Click to expand...
Click to collapse
Details below. Using 4EXT. Thanks
PYRAMID PVT SHIP S-OFF RL
HBOOT - 1.27.1100
RADIO - 11.24a.3504.31_M
OpenADSP-v05.6.0.2226.00.0418
eMMC-boot

Mikeparakh said:
Details below. Using 4EXT. Thanks
PYRAMID PVT SHIP S-OFF RL
HBOOT - 1.27.1100
RADIO - 11.24a.3504.31_M
OpenADSP-v05.6.0.2226.00.0418
eMMC-boot
Click to expand...
Click to collapse
maybe you have to install the latest firmware if you don't have it yet
and then flash the rom again
otherwise give it a try by doing the extra 1 step from here
http://forum.xda-developers.com/showthread.php?t=1631861

rzr86 said:
maybe you have to install the latest firmware if you don't have it yet
and then flash the rom again
otherwise give it a try by doing the extra 1 step from here
http://forum.xda-developers.com/showthread.php?t=1631861
Click to expand...
Click to collapse
I tried installing the latest firmware (3.33) again last night and then installing ROM again. No luck though unfortunately

Mikeparakh said:
I tried installing the latest firmware (3.33) again last night and then installing ROM again. No luck though unfortunately
Click to expand...
Click to collapse
which rom did you try to install?
try the other option then(extra 1 step)
best wishes

rzr86 said:
which rom did you try to install?
try the other option then(extra 1 step)
best wishes
Click to expand...
Click to collapse
I tried Bruce's KANG ROM. Then I tried DK's DKOSP Rom. I've been using Paranoid Android for ages and updated without issues, just suddenly last night everything went to pot.

Mikeparakh said:
I tried Bruce's KANG ROM. Then I tried DK's DKOSP Rom. I've been using Paranoid Android for ages and updated without issues, just suddenly last night everything went to pot.
Click to expand...
Click to collapse
that's why i asked you about roms
maybe you have to install gapps first and then the rom
try it
best wishes

rzr86 said:
that's why i asked you about roms
maybe you have to install gapps first and then the rom
try it
best wishes
Click to expand...
Click to collapse
Just tried this, GAPPS first and Rom second. Same problem still unfortunately.

Mikeparakh said:
Just tried this, GAPPS first and Rom second. Same problem still unfortunately.
Click to expand...
Click to collapse
not even now
ok do extra 1 step from the link i provided you before
if that fails too
format all partitions(except sdcard) from recovery
flash gapps and then the rom
best wishes

[Q] Wi-Fi problem on CyanogenMod 10.1

Hi,
I just installed the last version of CyanogenMod 10.1 from this link: http://forum.xda-developers.com/showthread.php?t=2305828
everything works very good but WiFi do not works..
do you have any tips? Many thanks

Are you s-on? Did you tried to Flash the boot image through fastboot ?
Sent from my Desire S using xda premium

kernel issue? have u flah other kernel with cm 10? the kernel patched in the rom is appropriate.

madboxgr said:
Are you s-on? Did you tried to Flash the boot image through fastboot ?
Sent from my Desire S using xda premium
Click to expand...
Click to collapse
How can I see if I'm in s-on mode? I just flashed the img from fastbook but wifi do not works :/

justoneweek said:
How can I see if I'm in s-on mode? I just flashed the img from fastbook but wifi do not works :/
Click to expand...
Click to collapse
Turn Off your device then press volume down and power to boot into fastboot mode. On the top of the screen with green letters read if it says s-on or s-off. Also can u try Kylons kernel?
Sent from my Desire S using xda premium

madboxgr said:
Turn Off your device then press volume down and power to boot into fastboot mode. On the top of the screen with green letters read if it says s-on or s-off. Also can u try Kylons kernel?
Sent from my Desire S using xda premium
Click to expand...
Click to collapse
Ok, I'm s-on.. but I don't have any kernel.. where can I find kernel?
Many thanks

justoneweek said:
Ok, I'm s-on.. but I don't have any kernel.. where can I find kernel?
Many thanks
Click to expand...
Click to collapse
in the latest 19th CM 10, the kernel in packed in the rom.
So you can just try to reflash the ROM. ^_^

had seaceue
jbosuper said:
in the latest 19th CM 10, the kernel in packed in the rom.
So you can just try to reflash the ROM. ^_^
Click to expand...
Click to collapse
I did reflash the ROM three times but wi-fi do not works :/
What I did is:
1- Flash the rom
2- Flash the gaps
I tried also:
1- Flash the boot image (was inside the zip of the rom)
2- Flash the rom
3- Flash the gaps
But nothing ://

First of all sorry for late answer. The steps since you are s-on are:
1)Flash the Rom
2)Flash gapps package
3)Flash the boot . img from Rom via fastboot.
If you wanna try different kernel search the dev section for Kylons cm kernel
Sent from my Desire S using xda premium

madboxgr said:
First of all sorry for late answer. The steps since you are s-on are:
1)Flash the Rom
2)Flash gapps package
3)Flash the boot . img from Rom via fastboot.
If you wanna try different kernel search the dev section for Kylons cm kernel
Sent from my Desire S using xda premium
Click to expand...
Click to collapse
+1 That's the right order (at least it worked for me ).

Kitke said:
+1 That's the right order (at least it worked for me ).
Click to expand...
Click to collapse
Hi
i have the same problem and i am happy to see that you have a solution!
can you give me more explication a "how to"
1)Flash the Rom => ok
2)Flash gapps package => ok
3)Flash the boot . img from Rom via fastboot. => never do that
thank you

thou92 said:
Hi
i have the same problem and i am happy to see that you have a solution!
can you give me more explication a "how to"
1)Flash the Rom => ok
2)Flash gapps package => ok
3)Flash the boot . img from Rom via fastboot. => never do that
thank you
Click to expand...
Click to collapse
For me this solution works! look for 'Flash boot image via fastboot' on internet and you will find a guide

flash boot.img
thou92 said:
Hi
i have the same problem and i am happy to see that you have a solution!
can you give me more explication a "how to"
1)Flash the Rom => ok
2)Flash gapps package => ok
3)Flash the boot . img from Rom via fastboot. => never do that
thank you
Click to expand...
Click to collapse
You have to use the following adb command: fastboot flash boot boot.img
I hope it helped

Same issue here... I was trying to flash: [ROM][08 AUG 13][4.2.2][UNOFFICIAL] CyanogenMod 10.1 (the 8-8-2013 build)
I wiped "data/factory-reset" + "cache" + "dalvik" and flashed the rom. Then I also flashed the boot.img using fastboot.
This all, while my phone was:
*** UNLOCKED ***
SAGA PVT SHIP S-ON RL
HBOOT-2.00.0002
RADIO-3822.10.50.24_M
eMMC-boot
Aug 22 2011,15:22:13
ROM booted very well, and everything seemed fine... Except for the Wifi, it did not work. It was able to see my network, but when I wanted to connect, there was something going wrong during verification and the connection was aborted somehow... Also connection to provider internet (G, 3G, H) was not working...
So I figured it might be my "original" radio shizzle... So after some very exciting moments of clicking dead links half way some guides , I managed to have my radio updated and also used revolutionary to get the S-OFF stuff... also updated my hboot somewhere in this process...
So now I have my phone like this:
*** RELOCKED ***
SAGA PVT ENG S-OFF RL
HBOOT-2.00.2002 (PG8810000)
RADIO-3831.19.00.110
eMMC-boot
Aug 12 2011,20:40:03
Since I liked the 4ext recovery, I flashed that first. (Even though Revolutionary also flashed a recovery (Clockworkmod??))...
But after I wiped cache ("data/factory-reset" + "cache" + "dalvik") and flashed the ROM the wifi still didn't work. I didn't flash the boot.img since it was booting fine... After first boot, I also went back to the recovery and flashed the gapps. But after reboot, still wifi was not working...
Now I understood that for a "RELOCKED" device flashing the boot via fastboot is not working, since you're relocked... But I don't know if that's true, and I did not try it yet...
Now I'm back at the ROM I had before ([ROM][23 OCT 12] Ice Cream Saga FINAL [4.0.4][Sense 3.6]), which works fine except it gives me 100% CPU load now and then... which drains my battery and makes the phone so slow I feel the need to throw it very hard into a wall... :silly:
To flash this ROM, I wiped cache ("data/factory-reset" + "cache" + "dalvik") and flashed the ROM. I did not flash boot.img via fastboot. And to my surprise it booted right away too...
Does anyone know what to do to fix the wifi?
Please give me a hint on where I went wrong...
Thanks!!

Mr. Fabulous said:
Same issue here... I was trying to flash: [ROM][08 AUG 13][4.2.2][UNOFFICIAL] CyanogenMod 10.1 (the 8-8-2013 build)
I wiped "data/factory-reset" + "cache" + "dalvik" and flashed the rom. Then I also flashed the boot.img using fastboot.
This all, while my phone was:
*** UNLOCKED ***
SAGA PVT SHIP S-ON RL
HBOOT-2.00.0002
RADIO-3822.10.50.24_M
eMMC-boot
Aug 22 2011,15:22:13
ROM booted very well, and everything seemed fine... Except for the Wifi, it did not work. It was able to see my network, but when I wanted to connect, there was something going wrong during verification and the connection was aborted somehow... Also connection to provider internet (G, 3G, H) was not working...
So I figured it might be my "original" radio shizzle... So after some very exciting moments of clicking dead links half way some guides , I managed to have my radio updated and also used revolutionary to get the S-OFF stuff... also updated my hboot somewhere in this process...
So now I have my phone like this:
*** RELOCKED ***
SAGA PVT ENG S-OFF RL
HBOOT-2.00.2002 (PG8810000)
RADIO-3831.19.00.110
eMMC-boot
Aug 12 2011,20:40:03
Since I liked the 4ext recovery, I flashed that first. (Even though Revolutionary also flashed a recovery (Clockworkmod??))...
But after I wiped cache ("data/factory-reset" + "cache" + "dalvik") and flashed the ROM the wifi still didn't work. I didn't flash the boot.img since it was booting fine... After first boot, I also went back to the recovery and flashed the gapps. But after reboot, still wifi was not working...
Now I understood that for a "RELOCKED" device flashing the boot via fastboot is not working, since you're relocked... But I don't know if that's true, and I did not try it yet...
Now I'm back at the ROM I had before ([ROM][23 OCT 12] Ice Cream Saga FINAL [4.0.4][Sense 3.6]), which works fine except it gives me 100% CPU load now and then... which drains my battery and makes the phone so slow I feel the need to throw it very hard into a wall... :silly:
To flash this ROM, I wiped cache ("data/factory-reset" + "cache" + "dalvik") and flashed the ROM. I did not flash boot.img via fastboot. And to my surprise it booted right away too...
Does anyone know what to do to fix the wifi?
Please give me a hint on where I went wrong...
Thanks!!
Click to expand...
Click to collapse
Can you try with Format everything except SD card and then flash the ROM? I've read that sometimes you can try to format twice in a row. If you are S-OFF you don't need to flash the boot with fastboot command.
Sent from my Desire S using xda app-developers app

Mr. Fabulous said:
Same issue here... I was trying to flash: [ROM][08 AUG 13][4.2.2][UNOFFICIAL] CyanogenMod 10.1 (the 8-8-2013 build)
I wiped "data/factory-reset" + "cache" + "dalvik" and flashed the rom. Then I also flashed the boot.img using fastboot.
This all, while my phone was:
*** UNLOCKED ***
SAGA PVT SHIP S-ON RL
HBOOT-2.00.0002
RADIO-3822.10.50.24_M
eMMC-boot
Aug 22 2011,15:22:13
ROM booted very well, and everything seemed fine... Except for the Wifi, it did not work. It was able to see my network, but when I wanted to connect, there was something going wrong during verification and the connection was aborted somehow... Also connection to provider internet (G, 3G, H) was not working...
So I figured it might be my "original" radio shizzle... So after some very exciting moments of clicking dead links half way some guides , I managed to have my radio updated and also used revolutionary to get the S-OFF stuff... also updated my hboot somewhere in this process...
So now I have my phone like this:
*** RELOCKED ***
SAGA PVT ENG S-OFF RL
HBOOT-2.00.2002 (PG8810000)
RADIO-3831.19.00.110
eMMC-boot
Aug 12 2011,20:40:03
Since I liked the 4ext recovery, I flashed that first. (Even though Revolutionary also flashed a recovery (Clockworkmod??))...
But after I wiped cache ("data/factory-reset" + "cache" + "dalvik") and flashed the ROM the wifi still didn't work. I didn't flash the boot.img since it was booting fine... After first boot, I also went back to the recovery and flashed the gapps. But after reboot, still wifi was not working...
Now I understood that for a "RELOCKED" device flashing the boot via fastboot is not working, since you're relocked... But I don't know if that's true, and I did not try it yet...
Now I'm back at the ROM I had before ([ROM][23 OCT 12] Ice Cream Saga FINAL [4.0.4][Sense 3.6]), which works fine except it gives me 100% CPU load now and then... which drains my battery and makes the phone so slow I feel the need to throw it very hard into a wall... :silly:
To flash this ROM, I wiped cache ("data/factory-reset" + "cache" + "dalvik") and flashed the ROM. I did not flash boot.img via fastboot. And to my surprise it booted right away too...
Does anyone know what to do to fix the wifi?
Please give me a hint on where I went wrong...
Thanks!!
Click to expand...
Click to collapse
I have to say that it is a quite strange situation... why don't you try to flash Kylon's kernel ? that might do the trick...
P.S. my device is S-OFF and *****LOCKED****, and I have no problems at all.

skorpionvenom said:
I have to say that it is a quite strange situation... why don't you try to flash Kylon's kernel ? that might do the trick...
P.S. my device is S-OFF and *****LOCKED****, and I have no problems at all.
Click to expand...
Click to collapse
Thanks guys, for your replies.
I did the "format except SD card" a few times and flashed the rom and the gapps (without booting in between) and rebooted.
Still no G/3G/H and no Wifi.
GSM was working though, I could ring my phone......
Then I tried to flash this kernel: [ROM][07 JUL][4.2.2][OFFICIAL] PAC-man v23.0.0 - The AIO Rom | Built From Source !
And guess what.... No Wifi again...
Also tried this one: [ROM][16-08-13][Flinny] Andromadus - CM10.1 - Saga [25b3]
All no working Wifi... The "verification" goes wrong and does not succeed... So then I tried to get the Wifi working by selecting static IP address..... and guess what?! It worked!!!!! For a minute or so.... I was able to connect to my google account and downloaded half an update of one of the apps... but then it stopped and I couldn't get it working again... All this time the provider internet (G/3G/H) was not working.
So I flashed [ROM][23 OCT 12] Ice Cream Saga FINAL [4.0.4][Sense 3.6]) again... And Wifi was fine... provider internet (G/3G/H) is fine too....
So anyone have a clue?? I definitely don't.
What could cause the CM10 ROMs are not working, while the CM9 ROMs are? What could be the cause?
Next attempt is to flash "Kylon's kernel". We'll see... :fingers-crossed:

Its working!!!!!!!!!!!!!!!!!!!!!!!!
Mr. Fabulous said:
Thanks guys, for your replies.
....
Next attempt is to flash "Kylon's kernel". We'll see... :fingers-crossed:
Click to expand...
Click to collapse
So I did...
But first I tried this one: [ROM][22 AUG] SagaSation Rom v2.0 | JB | 4.2.2 | Official |.... again no Wifi!
So then I flashed this one again: [ROM][08 AUG 13][4.2.2][UNOFFICIAL] CyanogenMod 10.1 and right away (no reboot in recovery) flashed Kylon's kernel: [KERNEL]AndromadusMod [CM10.1][27/07/2013] and after that I flashed Gapps.
And guess what..... No Wifi....
Suddenly I noticed how the provider internet was working.... which was a new feature for CyanogenMod 10.1 roms on my phone!!!
So I checked Wifi settings again and saw how I got a "Authentication failure"... also different.... Searched google for it and found that this was a known failure for android phones... solved by changing the settings of the router... changed router from WPA/WPA2 mixed blablabla to WPA2-Personal and BAMMMMMMMMMMMMMMM wifi was working fine............
I don't know what happened or what I did to fix it.... but it's working!! :victory:
Thanks for the support!!!!

Thanks man u saved me!!!!!!!!!!
Thank u very much Mr. Fabulous!!
I did followed your steps and BAMMMMMMMMMMMMMMMMMMMMM all working fine!!!!!

Phone keeps reboots on ViperS 3.1.2 rom

My phone keeps on reboots after flashing ViperS 3.1.2 any idea why this happens?

imationyj said:
My phone keeps on reboots after flashing ViperS 3.1.2 any idea why this happens?
Click to expand...
Click to collapse
post your bootloader details

rzr86 said:
post your bootloader details
Click to expand...
Click to collapse
Here you go:
=JuopunutBear=
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1111
RADIO-11.24A.3504.31_M
eMMC-boot
Jan 13 2012,17:33:34

imationyj said:
Here you go:
=JuopunutBear=
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1111
RADIO-11.24A.3504.31_M
eMMC-boot
Jan 13 2012,17:33:34
Click to expand...
Click to collapse
it should boot since you are on S-OFF
nvm try to flash the boot.img of the rom via fastboot command

rzr86 said:
it should boot since you are on S-ON
nvm try to flash the boot.img of the rom via fastboot command
Click to expand...
Click to collapse
Huh? I'm in s-off not? The booyloader there said I'm S-off

imationyj said:
Huh? I'm in s-off not? The booyloader there said I'm S-off
Click to expand...
Click to collapse
my mistake i meant S-OFF

rzr86 said:
my mistake i meant S-OFF
Click to expand...
Click to collapse
Can I use sultan kernel on vipers 3.1.2 Rom? default one drains my battery quite fast...
Just found out sultan kernel can't be flash in sense rom. >.<

imationyj said:
Can I use sultan kernel on vipers 3.1.2 Rom? default one drains my battery quite fast...
Just found out sultan kernel can't be flash in sense rom. >.<
Click to expand...
Click to collapse
also in viperS rom 3.1.2 and revelation rom works only one kernel
the one that is included
but wait for the update to 3.1.4 which will support voltage table

rzr86 said:
also in viperS rom 3.1.2 and revelation rom works only one kernel
the one that is included
but wait for the update to 3.1.4 which will support voltage table
Click to expand...
Click to collapse
after I do a clean install on viperS rom, there is a reboot happened. after that i flashed the boot.img hoping wont have random reboots happens again >.<
actually why we need to flash the boot.img? and why am i getting random reboots? any cause of it?

imationyj said:
after I do a clean install on viperS rom, there is a reboot happened. after that i flashed the boot.img hoping wont have random reboots happens again >.<
actually why we need to flash the boot.img? and why am i getting random reboots? any cause of it?
Click to expand...
Click to collapse
are you getting random reboots frequently?
we are using boot.img sometimes for the reason that sometimes during installation boot partition may not be flashed properly or failed

rzr86 said:
are you getting random reboots frequently?
we are using boot.img sometimes for the reason that sometimes during installation boot partition may not be flashed properly or failed
Click to expand...
Click to collapse
The reboots sometimes frequent sometimes not. It's quite random. I only faced it when using sense rom. Tried Revelation as well and got random reboots issues too. Now try flashing back to carbon rom which is not a sense rom to see whether I will get random reboots or not. :fingers-crossed:
EDIT: great... now i can't load into the carbon rom... after i choose the language and go into the welcome screen then it hangs and reboot... tried many times of clean install also no use... what is the problem with my phone? feel wanna throw it into rubbish bin already...
EDIT 2: I have restored back to ViperS rom and put it overnight. It has no random reboots over the night d, but my phone radio is draining my battery. I'm using GSAM battrey monitor and it show 8X% usage on my phone battery and the Signal Strength column says 98% is High(4).

[Q] Stuck on htc white screen

Hi,
S-Off, root, hboot 2.00.2002 (PG8810000) LOCKED, radio 3831.19.00.110
Until today I was on ViperSaga 2.1.1.
This morning, without my knowing exactly what happened, the virtual keyboard is switched on arabic and plant each use "arabic keyboard stopped".
I backed up my config and decided to upgrade to 2.2.0 ViperSaga.
I downloaded the zip, I put it on the sdcard, reboot in recovery (4ext), full wipe and wipe Cache + davlik, I begin to install the zip and it gets stuck on the boot screen of ViperSaga.
Half hour later, as I was not full of patience, I turn the battery, I turn the sdcard, I copy the zip from another ROM (SVHD) telling me I do not know what probably it would work, I launch this new install from the recovery ...
Nope. Is blocked for half an hour!
Help
Thanks
(Google trad is my friend)

brol31 said:
Hi,
S-Off, root, hboot 2.00.2002 (PG8810000) LOCKED, radio 3831.19.00.110
Until today I was on ViperSaga 2.1.1.
This morning, without my knowing exactly what happened, the virtual keyboard is switched on arabic and plant each use "arabic keyboard stopped".
I backed up my config and decided to upgrade to 2.2.0 ViperSaga.
I downloaded the zip, I put it on the sdcard, reboot in recovery (4ext), full wipe and wipe Cache + davlik, I begin to install the zip and it gets stuck on the boot screen of ViperSaga.
Half hour later, as I was not full of patience, I turn the battery, I turn the sdcard, I copy the zip from another ROM (SVHD) telling me I do not know what probably it would work, I launch this new install from the recovery ...
Nope. Is blocked for half an hour!
Help
Thanks
(Google trad is my friend)
Click to expand...
Click to collapse
S-Off, root, hboot 2.00.2002 (PG8810000) LOCKED, radio 3831.19.00.110
What do you mean LOCKED? S-OFF bootloader locked?
Recovery work? You got white screen after rebooting or during installation?
What kind of display you have? READ THIS AND CHECK YOUR PHONE.
Try other kind of ROM like CM.

SKENER said:
S-Off, root, hboot 2.00.2002 (PG8810000) LOCKED, radio 3831.19.00.110
What do you mean LOCKED? S-OFF bootloader locked?
Recovery work? You got white screen after rebooting or during installation?
What kind of display you have? READ THIS AND CHECK YOUR PHONE.
Try other kind of ROM like CM.
Click to expand...
Click to collapse
Hi,
I've got the white screen after the installation and the reboot.
Locked is here :
LOCKED
SAGA PVT ENG S-OFF RL
HBOOT-2.00.2002 (PG8810000)
RADIO-3831.19.00.110
eMMC-boot
Aug 12 2011.20:40:03
I restored my system with the recovery Vipersaga 2.1.1. The keyboard still does not work. It is difficult to write a single line of code. However, my screen is a sony (s6d16a0x21 wvga).
I will try to update with this ROM (CM10.2).
It's nice to agree that we must copy both zip on SDcard, go to the recovery:
wipe data / factory reset
wipe cover + davlik
before starting the installation of the ROM?
Thanks

brol31 said:
Hi,
I've got the white screen after the installation and the reboot.
Locked is here :
LOCKED
SAGA PVT ENG S-OFF RL
HBOOT-2.00.2002 (PG8810000)
RADIO-3831.19.00.110
eMMC-boot
Aug 12 2011.20:40:03
I restored my system with the recovery Vipersaga 2.1.1. The keyboard still does not work. It is difficult to write a single line of code. However, my screen is a sony (s6d16a0x21 wvga).
I will try to update with this ROM (CM10.2).
It's nice to agree that we must copy both zip on SDcard, go to the recovery:
wipe data / factory reset
wipe cover + davlik
before starting the installation of the ROM?
Thanks
Click to expand...
Click to collapse
Maybe keyboard on Vipersaga 2.1.1 is faulty.
When I change rom, first backup nandroid then wipe all except SD then install from zip rom then gapps.That 10.2 works great on my saga.Try CM 11 too. GL
Strange you have LOCKED S-OFF...

Hi,
CM10.2 ok.
Thanks for all.

Hey I have Hitachi panel ... Can flash any Rom other than the sense roms .. I really want jb and kitkat please help
sent from HTC DESIRE S using viper saga 2.2.0 Rom

ron2yee said:
Hey I have Hitachi panel ... Can flash any Rom other than the sense roms .. I really want jb and kitkat please help
sent from HTC DESIRE S using viper saga 2.2.0 Rom
Click to expand...
Click to collapse
Rather than simply sending PMs to members (which is not the best way to impress people), how about searching and reading. There are solutions, but you need to read so you understand what you are doing it, and why - or you will end up with a paperweight instead of a phone.