My phone keeps on reboots after flashing ViperS 3.1.2 any idea why this happens?
imationyj said:
My phone keeps on reboots after flashing ViperS 3.1.2 any idea why this happens?
Click to expand...
Click to collapse
post your bootloader details
rzr86 said:
post your bootloader details
Click to expand...
Click to collapse
Here you go:
=JuopunutBear=
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1111
RADIO-11.24A.3504.31_M
eMMC-boot
Jan 13 2012,17:33:34
imationyj said:
Here you go:
=JuopunutBear=
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1111
RADIO-11.24A.3504.31_M
eMMC-boot
Jan 13 2012,17:33:34
Click to expand...
Click to collapse
it should boot since you are on S-OFF
nvm try to flash the boot.img of the rom via fastboot command
rzr86 said:
it should boot since you are on S-ON
nvm try to flash the boot.img of the rom via fastboot command
Click to expand...
Click to collapse
Huh? I'm in s-off not? The booyloader there said I'm S-off
imationyj said:
Huh? I'm in s-off not? The booyloader there said I'm S-off
Click to expand...
Click to collapse
my mistake i meant S-OFF
rzr86 said:
my mistake i meant S-OFF
Click to expand...
Click to collapse
Can I use sultan kernel on vipers 3.1.2 Rom? default one drains my battery quite fast...
Just found out sultan kernel can't be flash in sense rom. >.<
imationyj said:
Can I use sultan kernel on vipers 3.1.2 Rom? default one drains my battery quite fast...
Just found out sultan kernel can't be flash in sense rom. >.<
Click to expand...
Click to collapse
also in viperS rom 3.1.2 and revelation rom works only one kernel
the one that is included
but wait for the update to 3.1.4 which will support voltage table
rzr86 said:
also in viperS rom 3.1.2 and revelation rom works only one kernel
the one that is included
but wait for the update to 3.1.4 which will support voltage table
Click to expand...
Click to collapse
after I do a clean install on viperS rom, there is a reboot happened. after that i flashed the boot.img hoping wont have random reboots happens again >.<
actually why we need to flash the boot.img? and why am i getting random reboots? any cause of it?
imationyj said:
after I do a clean install on viperS rom, there is a reboot happened. after that i flashed the boot.img hoping wont have random reboots happens again >.<
actually why we need to flash the boot.img? and why am i getting random reboots? any cause of it?
Click to expand...
Click to collapse
are you getting random reboots frequently?
we are using boot.img sometimes for the reason that sometimes during installation boot partition may not be flashed properly or failed
rzr86 said:
are you getting random reboots frequently?
we are using boot.img sometimes for the reason that sometimes during installation boot partition may not be flashed properly or failed
Click to expand...
Click to collapse
The reboots sometimes frequent sometimes not. It's quite random. I only faced it when using sense rom. Tried Revelation as well and got random reboots issues too. Now try flashing back to carbon rom which is not a sense rom to see whether I will get random reboots or not. :fingers-crossed:
EDIT: great... now i can't load into the carbon rom... after i choose the language and go into the welcome screen then it hangs and reboot... tried many times of clean install also no use... what is the problem with my phone? feel wanna throw it into rubbish bin already...
EDIT 2: I have restored back to ViperS rom and put it overnight. It has no random reboots over the night d, but my phone radio is draining my battery. I'm using GSAM battrey monitor and it show 8X% usage on my phone battery and the Signal Strength column says 98% is High(4).
Related
Well i just flashed cm10 by bruce
from my newly rooted and soff sensation h boot 1.27
and its been like 10 minutes and its still stuck at bootloader is this normal?
anthonyly said:
Well i just flashed cm10 by bruce
from my newly rooted and soff sensation h boot 1.27
and its been like 10 minutes and its still stuck at bootloader is this normal?
Click to expand...
Click to collapse
Well you should flash an extra thing in addition to the rom(and gaaps) if you are htc Dev unlocked...
If having 4EXT recovery then enable smart flash and flash the rom again
If any other recovery.. Then check for guide "flashing roms with SON " by asskickar in sensation general section and do extra #1 step from there
Sent from my HTC Sensation using xda premium
He said "s off HTC sensation."... Then it is not require to enable Smart flash manually .
May b this was due to bad download... , or due to not flashing additional files
Sent from my Sensation using xda app-developers app
I'm having the same problem!! Stuck on loading screen. Tried so wiping data, factory reset, installing a different ROM (Dragun's ROMs), but all result in the same problem now. What can I do?
Mikeparakh said:
I'm having the same problem!! Stuck on loading screen. Tried so wiping data, factory reset, installing a different ROM (Dragun's ROMs), but all result in the same problem now. What can I do?
Click to expand...
Click to collapse
S-ON or S-OFF?
what recovery do you have?
rzr86 said:
S-ON or S-OFF?
what recovery do you have?
Click to expand...
Click to collapse
Details below. Using 4EXT. Thanks
PYRAMID PVT SHIP S-OFF RL
HBOOT - 1.27.1100
RADIO - 11.24a.3504.31_M
OpenADSP-v05.6.0.2226.00.0418
eMMC-boot
Mikeparakh said:
Details below. Using 4EXT. Thanks
PYRAMID PVT SHIP S-OFF RL
HBOOT - 1.27.1100
RADIO - 11.24a.3504.31_M
OpenADSP-v05.6.0.2226.00.0418
eMMC-boot
Click to expand...
Click to collapse
maybe you have to install the latest firmware if you don't have it yet
and then flash the rom again
otherwise give it a try by doing the extra 1 step from here
http://forum.xda-developers.com/showthread.php?t=1631861
rzr86 said:
maybe you have to install the latest firmware if you don't have it yet
and then flash the rom again
otherwise give it a try by doing the extra 1 step from here
http://forum.xda-developers.com/showthread.php?t=1631861
Click to expand...
Click to collapse
I tried installing the latest firmware (3.33) again last night and then installing ROM again. No luck though unfortunately
Mikeparakh said:
I tried installing the latest firmware (3.33) again last night and then installing ROM again. No luck though unfortunately
Click to expand...
Click to collapse
which rom did you try to install?
try the other option then(extra 1 step)
best wishes
rzr86 said:
which rom did you try to install?
try the other option then(extra 1 step)
best wishes
Click to expand...
Click to collapse
I tried Bruce's KANG ROM. Then I tried DK's DKOSP Rom. I've been using Paranoid Android for ages and updated without issues, just suddenly last night everything went to pot.
Mikeparakh said:
I tried Bruce's KANG ROM. Then I tried DK's DKOSP Rom. I've been using Paranoid Android for ages and updated without issues, just suddenly last night everything went to pot.
Click to expand...
Click to collapse
that's why i asked you about roms
maybe you have to install gapps first and then the rom
try it
best wishes
rzr86 said:
that's why i asked you about roms
maybe you have to install gapps first and then the rom
try it
best wishes
Click to expand...
Click to collapse
Just tried this, GAPPS first and Rom second. Same problem still unfortunately.
Mikeparakh said:
Just tried this, GAPPS first and Rom second. Same problem still unfortunately.
Click to expand...
Click to collapse
not even now
ok do extra 1 step from the link i provided you before
if that fails too
format all partitions(except sdcard) from recovery
flash gapps and then the rom
best wishes
I tryed to install Pyramid_wp7.0.4 on my HTC sensation
after instaling system couldn't start it passed HTC logo open WINDOWS logo but couldn't start
then I wiped everything and tryed to install venoms 3.1.2 rom which I ussed before
after installing it couldn't pass even HTC logo.
any suggestions ?
phone is:
HTC SENSATION
firware 3.33-
pyramid pvt ship S-OFF RL
HBOOT 1.27.1100
Radio 11.24A.3504. 31_M
OpenADSP - v05.6.0.2226.00.0418
eMMC-boot
simkein said:
I tryed to install Pyramid_wp7.0.4 on my HTC sensation
after instaling system couldn't start it passed HTC logo open WINDOWS logo but couldn't start
then I wiped everything and tryed to install venoms 3.1.2 rom which I ussed before
after installing it couldn't pass even HTC logo.
any suggestions ?
phone is:
HTC SENSATION
firware 3.33-
pyramid pvt ship S-OFF RL
HBOOT 1.27.1100
Radio 11.24A.3504. 31_M
OpenADSP - v05.6.0.2226.00.0418
eMMC-boot
Click to expand...
Click to collapse
Since you are S-OFF but still try to flash boot.img using fastboot command ..
And also where did you find this WP7 rm for sensation?? b
may be this one http://forum.xda-developers.com/showthread.php?t=1417728
Download 4ext and format all partitions besides the sd card.
Sent from my HTC Sensation using xda app-developers app
topgeardave said:
Download 4ext and format all partitions besides the sd card.
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
already did, but no result.
simkein said:
already did, but no result.
Click to expand...
Click to collapse
the problem is that this rom is a gingerbread one
so it can't be boot with ics firmware
if you wan't to have this rom downgrade your firmware to gingerbread
rzr86 said:
the problem is that this rom is a gingerbread one
so it can't be boot with ics firmware
if you wan't to have this rom downgrade your firmware to gingerbread
Click to expand...
Click to collapse
I can't boot any ICS rom CM or viper,
simkein said:
I can't boot any ICS rom CM or viper,
Click to expand...
Click to collapse
what recovery do you have?
use 4ext if you don't have it already
rzr86 said:
what recovery do you have?
use 4ext if you don't have it already
Click to expand...
Click to collapse
have 4ext
formated everything except sd card, but no improvement.
I can install any rom but boot is problem
tryed even with different kernels .
simkein said:
have 4ext
formated everything except sd card, but no improvement.
I can install any rom but boot is problem
tryed even with different kernels .
Click to expand...
Click to collapse
try this
format all partitions except sdcard
flash an ics or jb rom
after that flash the boot.img of the rom via fastboot command
see if it boots then
rzr86 said:
try this
format all partitions except sdcard
flash an ics or jb rom
after that flash the boot.img of the rom via fastboot command
see if it boots then
Click to expand...
Click to collapse
already did :/
simkein said:
already did :/
Click to expand...
Click to collapse
use a ruu.exe to return to stock
don't worry you won't lose S-OFF
after that reflash 4ext and then the new rom
rzr86 said:
use a ruu.exe to return to stock
don't worry you won't lose S-OFF
after that reflash 4ext and then the new rom
Click to expand...
Click to collapse
tried that too
now have 4.0.3 and when I install viper cm or whatever it wan' boot then I get back to official 4.0.3 only rom that I can usse for now :/
simkein said:
tried that too
now have 4.0.3 and when I install viper cm or whatever it wan' boot then I get back to official 4.0.3 only rom that I can usse for now :/
Click to expand...
Click to collapse
i don't know mate
really strange
did you try with ARHD ROM 7.3 which the closest to the stock rom?
rzr86 said:
i don't know mate
really strange
did you try with ARHD ROM 7.3 which the closest to the stock rom?
Click to expand...
Click to collapse
is it possible that he lost sudo privilege during process of intalling wp7 rom ?
just tried but nothing :/
simkein said:
just tried but nothing :/
Click to expand...
Click to collapse
i am out of ideas mate
ok lets try this
if you are supercid return to the original cid and flash again any custom rom(ics or jb)
any other suggestions
solved
SD card was a problem for some reason
thank you all for effort
simkein said:
SD card was a problem for some reason
thank you all for effort
Click to expand...
Click to collapse
really?
do you have successfully booted a rom now?
Hi,
I have a Sensation, been using VEnom 3.1.2 for a while and decided to OTA to 3.1.3 and that worked like a charm..
Then I found 3.1.4 and tried OTA that one.
ANd it installed and when it was rebooting for the first time it got stuck in a loop.
Only see HTC logo, (not Quietly brilliant) and for a few secs the screen is lit.
then turns black and after a few it turns back on, HTC logo and then blac etc.
Tried to go back to 3.1.2 and 3.1.3 and then the new 5.0.0. Tried the CM 10.1 and 10.2 ROM too.
Tried formating everything in recovery 4eXT is the one I am using.
tried formating the SD-Card, reinstalling ROM and nothing works.
You guys have and suggestions?
my phone:
*** UNLOCKED ***
PYRAMID PVT SHIP S-ON RL
HBOOT-1.27.0000
eMMC-boot
Going mental here.
Enable smart flash from recovery
Or
Flash boot.img by adb
Or
Get s off and flash rom
Itsakash said:
Enable smart flash from recovery
Or
Flash boot.img by adb
Or
Get s off and flash rom
Click to expand...
Click to collapse
You are amazing!
Did the boot.img option and ta-da!! Thank you soo soo much
zajko said:
You are amazing!
Did the boot.img option and ta-da!! Thank you soo soo much
Click to expand...
Click to collapse
Would you consider s-offing your Sensation? You will not have to worry about this anymore if you do.
The colors are all messed up as well when i boot in and its not just this rom but cyanogen mod as well but whats odd is if i use older versions of both cyanogen and this everything is fine its just versions that are from oct 15ish and later.
Are you using a custom kernel? What are your bootloader details?
Sent from my Evita
timmaaa said:
Are you using a custom kernel? What are your bootloader details?
Sent from my Evita
Click to expand...
Click to collapse
Evita Put Ship S-On rl
Hboot-2.14.0000
Radio-0,24p.32.09.06
OpenDSP-v34.1.0.45.1219
eMMC- boot
Im pretty sure im on the stock kernel
Ok, are you flashing the boot.img with fastboot each time you change ROMs?
Sent from my Evita
timmaaa said:
Ok, are you flashing the boot.img with fastboot each time you change ROMs?
Sent from my Evita
Click to expand...
Click to collapse
No i haven't't i have just been flashing them but the rom still works its just the colors are all messed up.
XSoloDolo said:
No i haven't't i have just been flashing them but the rom still works its just the colors are all messed up.
Click to expand...
Click to collapse
You need to extract boot.img and flash it manually in fastboot every time you flash a new ROM. What you are experiencing is likely due to a kernel mismatched with the ROM.
Sometimes a kernal mismatch will result in the ROM not booting. Other times, it causes random bugs like this.
redpoint73 said:
You need to extract boot.img and flash it manually in fastboot every time you flash a new ROM. What you are experiencing is likely due to a kernel mismatched with the ROM.
Sometimes a kernal mismatch will result in the ROM not booting. Other times, it causes random bugs like this.
Click to expand...
Click to collapse
Wow that worked thanks man! I should have thought of that earlier too.
As Redpoint said, you need to extract the boot.img and flash it each time you change ROMs. The reason you were having problems was because you still had the boot.img from a previous ROM installed. It turns out that it was kinda compatible (letting the ROM boot), but kinda incompatible (strange visual glitches). If you get s-off you don't have to worry about flashing the boot.img manually anymore.
Sent from my Evita
Hi, need help with viper 5.0.0, after flashing rom, (of course before flashing i have format everything) it boots normally but after i got a message : "unfortunately the process com.android.phone has stopped" ... how to fix it ?
i was fixing permissions, reflashing, formatting ...
help me please
pangapz said:
Hi, need help with viper 5.0.0, after flashing rom, (of course before flashing i have format everything) it boots normally but after i got a message : "unfortunately the process com.android.phone has stopped" ... how to fix it ?
i was fixing permissions, reflashing, formatting ...
help me please
Click to expand...
Click to collapse
what recovery do you have?
4ext recovery
pangapz said:
4ext recovery
Click to expand...
Click to collapse
the only thing i can tell you is download the latest version of 4ext and then flash again the rom
otherwise redownload the rom
i have redownload rom, updated recovery and nothing helps what else can i do ?
pangapz said:
i have redownload rom, updated recovery and nothing helps what else can i do ?
Click to expand...
Click to collapse
try to wipe dalvik + cache from recovery
i was whiping everything already ... its the first time when i have that error since i have my first htc g1
pangapz said:
i was whiping everything already ... its the first time when i have that error since i have my first htc g1
Click to expand...
Click to collapse
format your sdcard or flash it with a different one
damn... the same problem after flashing from fresh sdcard
have no idea what can slove it ... someone writes that reflashing boot.img can help but how
pangapz said:
damn... the same problem after flashing from fresh sdcard
have no idea what can slove it ... someone writes that reflashing boot.img can help but how
Click to expand...
Click to collapse
the command is fastboot flash boot boot.img
connect the device in your pc and put it in fastboot mode
put the boot.img of the rom in your adb and fastboot folder
in that folder open a cmd and type the command i wrote above
yea, i know those commands but i dont know which boot.img shall i download
pangapz said:
yea, i know those commands but i dont know which boot.img shall i download
Click to expand...
Click to collapse
The boot.img is located inside the rom zip
A lovely thing about Christmas is that it's compulsory, like a thunderstorm, and we all go through it together.
Garrison Keillor
shi** it doesnt work is there any way to replace that process (dialer/phone) ? maybe this will fix my problem
phyramide is working fine without simcard or in a airplane mode
EDIT:
all vipers rooms on my phyramide have the same problem all the time maybe firmware can be bad ?
pangapz said:
shi** it doesnt work is there any way to replace that process (dialer/phone) ? maybe this will fix my problem
phyramide is working fine without simcard or in a airplane mode
EDIT:
all vipers rooms on my phyramide have the same problem all the time maybe firmware can be bad ?
Click to expand...
Click to collapse
are you on S-OFF?
yes, im s-off
EDIT:
*** UNLOCKED ***
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.29.0000
RADIO-11.24A.3504.31_M
OpenADSP-v05.6.0.2226.00.0418
eMMC-boot
pangapz said:
yes, im s-off
EDIT:
*** UNLOCKED ***
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.29.0000
RADIO-11.24A.3504.31_M
OpenADSP-v05.6.0.2226.00.0418
eMMC-boot
Click to expand...
Click to collapse
ok then
flash 3.33 universal from this thread
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instructions to the letter
and before flashing check md5 sums(important)
i have change firmware and it doesnt help ;/ all time the same crash ...
pangapz said:
i have change firmware and it doesnt help ;/ all time the same crash ...
Click to expand...
Click to collapse
did you try other roms except vipers's one?
yep, other roms works fine, only the vipers have problem
few weeks ago i have a vipers room and it works corectly then i have to flash stock rom (RUU). after that i want to flash vipers rom again and i have that crash ... its annoying...
pangapz said:
yep, other roms works fine, only the vipers have problem
few weeks ago i have a vipers room and it works corectly then i have to flash stock rom (RUU). after that i want to flash vipers rom again and i have that crash ... its annoying...
Click to expand...
Click to collapse
give it a try again
flash a ruu.exe and then come back for any viperS rom
note: no need to return to S-ON