Hi,
I want to have CoPilot on my HTC ChaCha. However, I am unable to type the numbers needed for the verification code. Whenever I press FN and then press a number, the character appears, instead of the numbers.
Does anyone know how to solve this?
i have this issue with other apps as well. any help would be appreciated.
I had a little think, and perhaps an on-screen keyboard will be the solution. Does anyone know how to do that?
sorry if this is obvious, are you *holding* fn and pushing number at same time?
sorry i can`t help with your initial problem. just to say that copilot live8 works fantastic on the cha cha. so far i've used it in spain where i live, denmark, where i was working a few weeks ago and in norway, where i'm working now. haven't had any issues so far.
qbert456 said:
sorry if this is obvious, are you *holding* fn and pushing number at same time?
Click to expand...
Click to collapse
Pressing fn and then a number does not work with the copilot verification code. Or at least not with my phone/copilot version
Try to type each number with alt key, for example, alt+number then again alt+number and so on, dont lock the alt key. It works for me on skype and kakaotalk
Sent from my HTC Status using XDA App
yeah, me too
Finally succeed to install copilot with the chacha keyboard :
don't use it "landscape" but "portrait" oriented, then use the fn button each time you need a digit (no hold fn)...
ash
Thanks for your answer. After all this time i finally installed copilot. Is a big help. Thanks
Related
hi friends of the net,
help pleeeease.
when i go into go into calendar i get numbers come up and not letters when the key pad is closed, if i open phone to type on key padi can get the letters, if any numbers have been entered already the numbers do not delete and i have to press the home key and then go back to it again before it lets me write anything, this also happens in internet explorer! after this has happened if i try to access contacts via home page or via menus it does not let me access them.
also my i bar/cursor vanishis sometimes when i am in text messaging.
tried factory reset and it still happens, also had a new phome sent out and the new one does the same!!!! assume its software fault on many phones.
Can you vox owners try these out...
This is regarding my friends phone, member - Wezog. Ive taken a look at the phone and im just wondering if any of you guys out there have these problems?
1 - Make sure your phone is closed (qwerty keyboard is hidden away), using the right soft key or by going into the start menu select the calendar application.
Once in here start typing an appointment, do you find that you have numbers appearing instead of letters?
Its as tho you cannot type any appointments using the keypad, but you have to open up the e650 and use the qwerty keyboard to enter information.
Do you HTC owners get the same problem or is it just the Orange e650 owners, or is it just my friend being unlucky? (being his 2nd phone to do exactly the same thing - hes let orange know about this but apparently has to decide what he wants to do)
2 - Once youve tried the Calendar above, exit out of it and then try and select CONTACTS as tho you were going to call someone either by using the left soft key or by actually going into Contacts in the start menu.
Do you find that Contacts dont display and nothing comes up? My mate has to then soft reset his phone to get things back to normal again.
Thanks in advance for your help, its very appreciated.
Cheers
Could someone try the steps below and post here...please
Would appreciate you guys following the steps below and letting me know if you get the problem, or not. Cheers.
tomchap said:
This is regarding my friends phone, member - Wezog. Ive taken a look at the phone and im just wondering if any of you guys out there have these problems?
1 - Make sure your phone is closed (qwerty keyboard is hidden away), using the right soft key or by going into the start menu select the calendar application.
Once in here start typing an appointment, do you find that you have numbers appearing instead of letters?
Its as tho you cannot type any appointments using the keypad, but you have to open up the e650 and use the qwerty keyboard to enter information.
Do you HTC owners get the same problem or is it just the Orange e650 owners, or is it just my friend being unlucky? (being his 2nd phone to do exactly the same thing - hes let orange know about this but apparently has to decide what he wants to do)
2 - Once youve tried the Calendar above, exit out of it and then try and select CONTACTS as tho you were going to call someone either by using the left soft key or by actually going into Contacts in the start menu.
Do you find that Contacts dont display and nothing comes up? My mate has to then soft reset his phone to get things back to normal again.
Thanks in advance for your help, its very appreciated.
Cheers
Click to expand...
Click to collapse
Frankly - actions like creating an appointment is why I chose a phone with a QWERTY keyboard after all
But for the sake of your test I tried to create an appointment on my closed Vox and it worked.
Pressing a pad key repeatedly scrolls through its lowercase letters + the number, starting with the first letter. The *-key switches between lowercase and uppercase.
Contacts open and work normally after closing the Calendar.
I have an unbranded HTC S710 with the original ROM.
The behaviour you describe is definitely weird. And it happens also after a "Clear Storage" / Hard Reset ?
hi,
can anyone tell me how to disable T9 perminently via a reg hack? i am using wm6 and i have done the alt-space bar command, but sometimes at power up the t9 mode restarts and does not allow me to enter numbers so i cannot unlock my device and end up hard resetting it. i think this will be easier then bypassing the device lock password.
thanks
If you want to enter numbers, you should be able to just hold down the button that has the number. For example, to enter a "2" press and hold "E".
thewayne said:
If you want to enter numbers, you should be able to just hold down the button that has the number. For example, to enter a "2" press and hold "E".
Click to expand...
Click to collapse
thanks for trying, but i am not new to smartphones and i have already covered all the basics. thats why i am looking for a registry edit.
there isn't one as far as i know.
on the S621, you just press the FN key and SPACE bar key together and you can choose your default input.
Cheers
S.
stevencwong said:
on the S621, you just press the FN key and SPACE bar key together and you can choose your default input.
Cheers
S.
Click to expand...
Click to collapse
i take it you didnt actually read the very first post in this thread.......thanks for trying but reading the question usually leads to a better result, lol
Strange... mine stays off with alt-space until I turn it back on -- through multiple reboots, even after one of those endless-rebooting sessions...
my problem is random. it will work fine for a couple of reboots, then lock up, or sometimes it will not get past the first reboot. very frustrating as i am on the road all day i rely heavily on my smartphone. looks like i will be waiting for a rom upgrade
I Have a S620 Italian..
How to activate T9 or similiar?
Thanks
to turn t9 off on an S620 wm6
in
\HKLM\Software\Tegic\eT9\ME
st both DefaultInputModule and TextInputMode to 0
enjoy
dammit, i tried that reg edit on my shadow, and now the keyboard doesnt work at all, so i cant even change the reg edit back!! anybody have any ideas?? can i edit my phone registry from my computer?? thanks
omar
omaralt said:
dammit, i tried that reg edit on my shadow, and now the keyboard doesnt work at all, so i cant even change the reg edit back!! anybody have any ideas?? can i edit my phone registry from my computer?? thanks
omar
Click to expand...
Click to collapse
You can use CeRegEdit to edit your registry from your computer
still waiting for a way to completely disable T9
HKLM\SOFTWARE\Tegic\eT9\IME
CarrierDefaultTextMode=dword:0
(0 for ABC / 1 for XT9)
I just installed the EasyROM 2.0 on my HTC Touch Pro (Italian) nad I also changed the key in the regitery for the Italian Keyboard, BUT some keys continue to don't work, and the most imnportant the FN (green) key, without that kay a can0t do any symbols or other letters
Any one have a solution for that ?
Thanks
Luca
No one can help me ?
Thanks
i had the same problem when i installed the Elite RC3 Rom.
Then about a month later i got a SMS from my service provider saying "you will shortly receive handset settings for Data Services, pls save and activate these settings"
From then on my keypad worked normally.
Dunno if that helps.
Thanks !
Luca
siroftherings said:
I just installed the EasyROM 2.0 on my HTC Touch Pro (Italian) nad I also changed the key in the regitery for the Italian Keyboard, BUT some keys continue to don't work, and the most imnportant the FN (green) key, without that kay a can0t do any symbols or other letters
Any one have a solution for that ?
Thanks
Luca
Click to expand...
Click to collapse
Where did u get this rom from, i couldnt find it here in the forum
Anyways, if its a fuze rom u maybe will look here.
http://forum.xda-developers.com/showthread.php?t=474192
Hi,
I recently bought a mini bluetooth keyboard for use with my Asus A696 (WM 6.0).
It works very well and I'm very happy with it; although there is a problem: the "FN" key on my keyboard does not seem to be recognized by WM. This is a problem as I need to press FN and another key together to get a question mark and some other important things. If I now press FN and the desired key together, it acts like I didn't press the FN key.
Can someone help me solve this?
Thanks in advance!
I still did not find any solution. Is here really noone who can help me?
Is there really noone who can help me?
same problem here
i think we need drivers for keyboard...
Hi,
I just flashed CM9 ROM on my HTC Chacha. It works flawlessly and its very smooth!!! Thanks Alex C for the wonderful work!
I am facing only one problem. Somehow the "End call" is not behaving correctly. When I am in a particular app and want to close it, I press the end call key ; but it does not close the application, it instead locks the screen.
I checked all posts but I think no one else has faced this issue yet. I tried to scan through the keypad.klm and keypad.kl files (as mentioned in original post of CM9) but I am not able to understand how to change this mapping. I used key event logger and found that keycode for "End call" is 6. But in none of the keypad files, keycode 6 is mapped to end call. I am very confused now
The CID for my phone is - htc_038 and it's S-ON.
Please help. Thanks in advance.
In spare parts change the End Button behavior to Go to Home. If You cannot find the spare parts install spare parts + from market. And before Alex gets pi**ed it is not his rom, lol. It is adlx.xda's.
Regards
Problem solved!!
didije002 said:
In spare parts change the End Button behavior to Go to Home. If You cannot find the spare parts install spare parts + from market. And before Alex gets pi**ed it is not his rom, lol. It is adlx.xda's.
Regards
Click to expand...
Click to collapse
Oops! Thanks for clarification on ROM...
And thanks for suggesting the "Spare parts" app, it solved my problem!!!
Cheers!!!