[Q] Mods- Throttle Release ??? - T-Mobile LG G2x

Im new to tmobile and ive been doing research an ive tried a few different
things...
---Currently---
Model - LG-P999DW
Stock rooted - 2.3.3 -no roms-
-------------------------
What Ive Tried
-------------------------
Ive tried going back to 2.2.2 and doing the
services.jar via root exp. but had no luck sorta
shut down my data more then anything i was
able to get everything copied over did the permissions
fix and rebooted no problems booted up fine but it was
like i had no data at coming or going...
So im wondering does anyone know a method
or a mod or some sorta way to unthrottle ????

It's not possible to stop throttling from the phone. It's all done from T-Mo's servers.

FatalityBoyZahy said:
It's not possible to stop throttling from the phone. It's all done from T-Mo's servers.
Click to expand...
Click to collapse
Wasn't there a thread in the Dev section for a while that talked about this? I think people had a placebo effect going on and thought it worked, in the end they came up with this same conclusion. Meh, don't feel like searching, but OP feel free to search that section if you haven't.

Related

Sprint TV 2.1 ROM's

I have searched and only found the posts in separate threads talking about the loss of Sprint TV, and most have not been addressed within the threads. I had Damage 2.1 ROM installed and lost Sprint TV after nearly a week. States I need to be a Sprint Customer to use this app.
I switched to the Fresh 2b ROM last night and had Sprint TV working. This morning I get the same message I am not a Sprint Customer.
I have updated the Build.prop file to show the 310120 and Sprint thinking this might help. Just curious if anyone out there with more knowledge than me has a fix for this. As I stated in a thread post, the TV on the phone is a great kid distraction at times when I need it. That and I like having everything I am paying for working.
Thanks
Interesting, I was thinking about flashing my ROM to one of the custom 2.X roms, however if this is the case I may just wait a while. Although I don't use Sprint TV alot, jniiya is right, it is a good kid distraction to have on your phone... Then again TV turns kids in to zombies.
I can run Sprint TV just find using damgeless, and I'm able to stream with no problem. I did have to restart my phone after I installed it though.
JUST USE FRESH'S PRE KITCHEN TO FLASH IT I did it on damageless rom with no probs whatsoever
nbroneobi said:
JUST USE FRESH'S PRE KITCHEN TO FLASH IT I did it on damageless rom with no probs whatsoever
Click to expand...
Click to collapse
It's not a problem of getting on the phone. I have had it installed from day one with both ROMs. It works for a while, but then it gives me the error of you need to be a Sprint Customer to use this app.
I am thinking since these builds are based off the Eris it is sending some type of info back to the Sprint servers show it as a Verizon phone. I just can't figure out what it is since I have changed the build.prop file, and I am not familiar enough with these systems/codes to dig around and think of another place it would be sending back info as if it were Verizon.
This is not like a deal breaker with me in anyway. Just trying to figure it out for the future.
Thanks for reading the post.
jniiya said:
It's not a problem of getting on the phone. I have had it installed from day one with both ROMs. It works for a while, but then it gives me the error of you need to be a Sprint Customer to use this app.
I am thinking since these builds are based off the Eris it is sending some type of info back to the Sprint servers show it as a Verizon phone. I just can't figure out what it is since I have changed the build.prop file, and I am not familiar enough with these systems/codes to dig around and think of another place it would be sending back info as if it were Verizon.
This is not like a deal breaker with me in anyway. Just trying to figure it out for the future.
Thanks for reading the post.
Click to expand...
Click to collapse
Exact same problem here. It works for a while, then I get that error message. If I uninstall and reinstall Sprint TV (pick your favorite method), it works for a while again, but after minutes, hours, or a day (no noticeable pattern) I get that error message.
I've posted on it in several threads about this topic hoping to find a fix. People have told me to edit my build.prop file. I keep trying, but I'm new to this, and every time I try to add the lines below I have problems. The phone freezes during boot up, and I end up having to do a nandroid restore.
ro.cdma.home.operator.numeric=310120
ro.cdma.home.operator.alpha=Sprint
Several threads on this forum and others say this (or variations on it) will solve the problem, but it locks my phone up. I've tried with the =, without, with spaces before and after, and at various places within the file. I wonder if I'm doing something really stupid because I don't know exactly what the formatting is supposed to be. If anybody knows of a tutorial on build.prop, I'd be thrilled to use that, but I haven't been able to find one.
Been working fine for me. Running Fresh 2.0b2 since Flipz released it.
Not to hijack, but have you tried the TV.com app? Something like that I think I uninstalled it, but I thought it was actually better than Sprint TV...
Yep, I went back to 1.5 Fresh because of Sprint TV. Sprint just got ESPN and the NCAA tourney should be on. I am crossing my fingers that Sprint releases the update in the next week or so.
newguy77 said:
I've posted on it in several threads about this topic hoping to find a fix. People have told me to edit my build.prop file. I keep trying, but I'm new to this, and every time I try to add the lines below I have problems. The phone freezes during boot up, and I end up having to do a nandroid restore.
ro.cdma.home.operator.numeric=310120
ro.cdma.home.operator.alpha=Sprint
Click to expand...
Click to collapse
You do not have to add the lines just change the values. The lines are already in there.
This fix didn't work for me. It still tells me I need to be a sprint subscriber.
gmramirez1973 said:
You do not have to add the lines just change the values. The lines are already in there.
Click to expand...
Click to collapse
They're not in the build.prop on my phone. It's not like I didn't look for them. I even used the search feature on my editor. The only line I have that contains cdma is:
ro.cdma.privilege.timeout=120000
newguy77 said:
They're not in the build.prop on my phone. It's not like I didn't look for them. I even used the search feature on my editor. The only line I have that contains cdma is:
ro.cdma.privilege.timeout=120000
Click to expand...
Click to collapse
Sorry about that. What rom are you using. I am damage 1.0 if you want I can post the build.prop from my phone but I do not know if it will fix SprintTv because I do not use and I have not installed it.
gmramirez1973 said:
Sorry about that. What rom are you using. I am damage 1.0 if you want I can post the build.prop from my phone but I do not know if it will fix SprintTv because I do not use and I have not installed it.
Click to expand...
Click to collapse
No problem. I am also using damage 1.0, however, I see references to pancake (and cupcake, bikcmp) in my build.prop file. I was surprised by that. Is that normal? I did do a wipe (wipe data/factory reset) before I installed damage. In fact, I wiped before going from pancake to fresh 2.0 and again before going from fresh 2.0 to damage.
If you can post the build.prop, I'll give it a try and report back.
build.prop damage 1.0
newguy77 said:
No problem. I am also using damage 1.0, however, I see references to pancake (and cupcake, bikcmp) in my build.prop file. I was surprised by that. Is that normal? I did do a wipe (wipe data/factory reset) before I installed damage. In fact, I wiped before going from pancake to fresh 2.0 and again before going from fresh 2.0 to damage.
If you can post the build.prop, I'll give it a try and report back.
Click to expand...
Click to collapse
Sorry for the late post. I just pull it from my phone. Attached is the build.prop from Damage 1.0. Again I do not use SprintTv or have it installed so I do not know if it will fix it. You have to rename the file to build.prop and push it to /system/.
Ok so I'm watching ESPN all day long at work, and I turn it off so I can get ready to leave work.
While on the subway I try to access it and I get the "You must be a Sprint customer to view Sprint TV" or some crap like that. I'm like ok, maybe because I might be roaming on Verizon network its not letting me. So I wait until I have a good signal and try again, same error message.....
I tried restarting phone, disable and re-enable mobile network, and checked to make sure I wasn't roaming. No Luck.
Look for the Tmobile ported one
Has anyone tried it on Darch's rom. It's based off of the legend which is for sprint?
Can i get a link to the official Sprint TV APK. I cant find it. I have the hacked t-mo one. but half of the video is cut off for some reason
morbidpete said:
Can i get a link to the official Sprint TV APK. I cant find it. I have the hacked t-mo one. but half of the video is cut off for some reason
Click to expand...
Click to collapse
Here are the apk's. I got these from the Fresh Pre-Kitchen when I was running 1.1

[Q] Q time!

Alright try not to flame the piss outta me; i've been a member here for years and i know how to SEARCH. (and i did)
there's alot of reading between the lines that goes on here. lots of things are not explicit.
my needs are:
1. to be able to tether via bluetooth/wifi/usb/MIFI/hotspot my phone to a windows laptop
2. to delete the bloatware
3. maaaybe save the apps to the SD but that's not necessary
but i must remain with stock ROM. i had a cingular 8125 (wizard) and an AT&T Fuze (diamond) that i hacked and cracked and unlocked and every other thing you could do to them.. and it was always a mess; emailin the dev late at night cause this don't work or that don't work, data don't work, GPS don't work, radios don't work, the phone don't work, it needs to be rebooted everyday cause the other thing's from a different phone. hell i even blew the speaker on the fuze with some speaker mod i downloaded cause it was too quiet and so it didn't ring half the time. i don't need sweet fuzeberry pictures for the menu button and all of this.
so unless there's some perfect rom out there that doesn't have not one damn error, i'd like to stay with a stock rom.
so can bullets 1 and 2 and maybe 3 be solved without going with a non-stock rom? do i have to root to get #'s 1 and 2?
thanks for not flamin me
There is a stock rooted Rom on here which you can use that will let you do what you want.
As for the roms, I know everyone has their preference but gtg's inspired saga gingerbread Rom is pretty much flawless. Even have it on my wife's inspire and she never complains about anything not working. I am sure others are very good as well.
wdkingery said:
Alright try not to flame the piss outta me; i've been a member here for years and i know how to SEARCH. (and i did)
there's alot of reading between the lines that goes on here. lots of things are not explicit.
my needs are:
1. to be able to tether via bluetooth/wifi/usb/MIFI/hotspot my phone to a windows laptop
2. to delete the bloatware
3. maaaybe save the apps to the SD but that's not necessary
but i must remain with stock ROM. i had a cingular 8125 (wizard) and an AT&T Fuze (diamond) that i hacked and cracked and unlocked and every other thing you could do to them.. and it was always a mess; emailin the dev late at night cause this don't work or that don't work, data don't work, GPS don't work, radios don't work, the phone don't work, it needs to be rebooted everyday cause the other thing's from a different phone. hell i even blew the speaker on the fuze with some speaker mod i downloaded cause it was too quiet and so it didn't ring half the time. i don't need sweet fuzeberry pictures for the menu button and all of this.
so unless there's some perfect rom out there that doesn't have not one damn error, i'd like to stay with a stock rom.
so can bullets 1 and 2 and maybe 3 be solved without going with a non-stock rom? do i have to root to get #'s 1 and 2?
thanks for not flamin me
Click to expand...
Click to collapse
All of that will require root access. At the very least, your gonna need to do that.
Once you do, if you want a kick-ass fast, stable and dependable tweaked custom stock ROM...try the one in my signature.
Nickovtyme said:
All of that will require root access. At the very least, your gonna need to do that.
Click to expand...
Click to collapse
With the exception of maybe App2sd.
But indeed, rooting is pretty much a must-do activity.
Inspire 4G ¦ XDA Premium
Nickovtyme said:
All of that will require root access. At the very least, your gonna need to do that.
Once you do, if you want a kick-ass fast, stable and dependable tweaked custom stock ROM...try the one in my signature.
Click to expand...
Click to collapse
sadly i cannot even find the one in your sig
wdkingery said:
sadly i cannot even find the one in your sig
Click to expand...
Click to collapse
Let me remedy that for ya.
http://forum.xda-developers.com/showthread.php?t=1015206
I think there's only a handful of us around here that use this ROM as their day to day ROM...and mostly its because it's so close to stock. Not many bells or whistles with this one.
oh puke it appears i'm gonna end up crackin this phone into pieces as well.. bleh. there's sooo much i don't know right now. apn? what was it before i did this? what should it be? a million trillion new things with a new operating system, new phone.. not one thing is the same it seems. on the the [GUIDE] i go..
can this all be undone on this phone if i crush it and need to return it to AT&steal for insurance?
Take a breath. You will catch on and yes it can be reversed if you need to send in for insurance though if the phone is split in half you may have trouble running the stock ruu and getting s-on.
Check the thread in dev section on data speed to see apn settings I believe they are listed in there.
i have yet to even plug this phone into my laptop for the first time.
any activesync type programs i need?
wdkingery said:
oh puke it appears i'm gonna end up crackin this phone into pieces as well.. bleh. there's sooo much i don't know right now. apn? what was it before i did this? what should it be? a million trillion new things with a new operating system, new phone.. not one thing is the same it seems. on the the [GUIDE] i go..
can this all be undone on this phone if i crush it and need to return it to AT&steal for insurance?
Click to expand...
Click to collapse
I meant to tell ya that with the Ingersoll ROM, well with most of the ROM's in the dev section, wifi hotspot is enabled by default. I have used it and can verify that it works perfectly..just enable wifi hotspot in the settings. Oh and AT&T won't ever know either...though there is some debate about that.
Or like Newter555 says, do the research and you can add the APN's yourself.
wdkingery said:
i have yet to even plug this phone into my laptop for the first time.
any activesync type programs i need?
Click to expand...
Click to collapse
Follow the sticky guide at the top of this forum and you should breeze right through it.
i believe i rooted, but rom manager cannot find superuser, i downloaded superuser from market and it is not doing anything special; no errors ...
i'm now stuck with a rom that has no sound. please help
wdkingery said:
i believe i rooted, but rom manager cannot find superuser, i downloaded superuser from market and it is not doing anything special; no errors ...
i'm now stuck with a rom that has no sound. please help
Click to expand...
Click to collapse
If you used the attn1 method he mentions that you have to flash a ROM to get sound back. Do you have rom manager installed? It can install recovery for you and download roms for you.
Sent from my Desire HD using XDA Premium App
He has recovery installed. All he has to do is select a rom, put it on the hd and start recovery to flash it. The process is well.documented. ROM manager is not the answer.
lil fyi i got it all worked out thanks to attn1
wdkingery said:
lil fyi i got it all worked out thanks to attn1
Click to expand...
Click to collapse
Awsome! Good for you.
Welcome aboard...you're life is changed forever.

root/no root

Im coming from a droid x and find to root this alittle challenging. While I cant get root I havent found one that I like. My whole purpose if to just get rid of bloat. After my last attempt I got crappy reception and wanted to unroot. I did and reception was back to normal. After all the problems and what with the gingerbread files I didnt want to go that route with that radio. So what are my options? With the last root attempt I used the 1 click method, was that my problem? Do I need to read up more on adb commands. Or should I say screw it and stay stock? There are multiple roms out there but havent found one for my particular needs. I know I bought this phone to learn more and be a challenge but this is trully a pain in the ass. So comments advise is greatly appreciated.
blueis300 said:
Im coming from a droid x and find to root this alittle challenging. While I cant get root I havent found one that I like. My whole purpose if to just get rid of bloat. After my last attempt I got crappy reception and wanted to unroot. I did and reception was back to normal. After all the problems and what with the gingerbread files I didnt want to go that route with that radio. So what are my options? With the last root attempt I used the 1 click method, was that my problem? Do I need to read up more on adb commands. Or should I say screw it and stay stock? There are multiple roms out there but havent found one for my particular needs. I know I bought this phone to learn more and be a challenge but this is trully a pain in the ass. So comments advise is greatly appreciated.
Click to expand...
Click to collapse
I wouldn't give up if i were you, rooting is the way to go. And ya thunderbolt is "different" but it seems from here on out most lockdown phones will be this perplexing at times, but good news to use, some companies have given up and will open up there future phones boot loaders. And its not because it lock down it just because they weren't "meant to be rooted and optimized for the user".
It seems weird that your reception got worse due to rooting, i have not heard that problem before or seen it posted in these threads. Most of the complants from rooting is either having random reboots, or the unfortunate brick or root didn't actually work for them.
Just make sure your up to date with the froyo radio when you were rooted, I know you cant check now, but maybe you used an older one the auto root method was using? Its worth a check. The newest one has had some good reception Verizon sent in a OTA.
And i used an auto one click way and it worked for me so it may depend on what one you used. But its advised to use adb.
Also there are a lot of basic de-bloat roms out there, they are just buried at the end of this forum, and never get updated because once they are de-bloated there is not much left that needs to be updated.
And dont worry about the Gingerbread problems, I wish i never left Gingerbread, i have had more problems on froyo then i was on gingerbread. With froyo i still have problems, but Gingerbread seems to run so smoothly, and a new leak is hopefully around the corner, there was one up but it was taken down and senior moderators said its coming be patience.
hope this helps
All rooting does is give you access to system files. There's no way that it would mess up your radio.
I'm also curious where the "1 click method" is.
a simple search would lead you to
http://forum.xda-developers.com/showthread.php?t=1009969
SomeGuyDude said:
All rooting does is give you access to system files. There's no way that it would mess up your radio.
I'm also curious where the "1 click method" is.
Click to expand...
Click to collapse
Well here is the file I was pointed to when I first started and I went from having no bars to 1x to 3g to 4g and all over the place.I guess I wont give up because I wanted an challenge but man this is different. More reading reading reading and find more on ADB.
http://depositfiles.com/files/wo74rmphi
Ill try for a couple more days after checking things out a bit.Thanks for the comments and help.
blueis300 said:
Well here is the file I was pointed to when I first started and I went from having no bars to 1x to 3g to 4g and all over the place.I guess I wont give up because I wanted an challenge but man this is different. More reading reading reading and find more on ADB.
http://depositfiles.com/files/wo74rmphi
Ill try for a couple more days after checking things out a bit.Thanks for the comments and help.
Click to expand...
Click to collapse
Never seen that file. Stick to the development section of this forum and you should be gtg. Most of what you need is stickied at the top.
Sent from my ADR6400L using Tapatalk
otakueric said:
a simple search would lead you to
http://forum.xda-developers.com/showthread.php?t=1009969
Click to expand...
Click to collapse
Thanks for the link, in my search I had a couple of other ways to do it but I did search.
Rooting is the only way to TRUELY enjoy this phone and all it has to offer IMO.
Ok well all of a sudden my phone cant receive call or make them but can make and receive texts? Any ideas on that. I got a phone call yesterday but it was a little wack. Called tech support and now no calls.

[ROM][V6/19/11] Miui 1.6.10 Mtd (Mesmerize only)

Ok I did this the other day and haven't messed with it much. Not sure I would recommend it for daily use. As landscape, gps and some other minor issues are present. This also isn't for the showcase. This started out as a mix of the Fascinate port/Cm7 Mtd for the mesmerize. Then a mix of miui android. So credit goes to them guys though it has some stuff done by myself.
First I am not responsible if your phone bursts into flames and melts down. Or anything of the such. You took the risk flashing it.
Now on to getting started first you need to download the fascinate radio below:
http://dl.dropbox.com/u/16907924/ec01_radio.tar
Plug it into odin in the pda spot. Yank the battery, plug in your usb cord, followed by holding volume down. Then flash it ( Pretty sure you know the deal) Once done download Miui 1.6.10 Cmtd below:
http://2fastroms.com/dm_eds/download.php?id=22
Transfer it to your sd card. Boot into cwm recovery using the 3 finger method. Perform a wipe and format system. Though probably not needed. Then install the above rom. Once installed reboot. First boot will take awhile. But it should boot.
To get off of the rom you need to odin ec-10 on repartition. You can supply feedback as it would better help me with issues you find. But do not complain something doesn't work. Also if someone would grab screenshots and upload them I will add them to the post.
Gonna give this a shot....not being pushy, just asking, is there a mes version of the latest release in the works?... I dont know what happened, but I was running this fine (the Fascinate version) with the EC01 radio, then something happened, I did a Factory reset, and since then, any 2.3.4 MTD rom I flash is missing 3g Data. It keeps connecting and disconnecting, and will never actually transfer information almost like it will only connect to Verizons towers and will not register my 3g data...really bummed
**Edit Also, does the latest CM7 MIUI MTD kernel work with this??... curious
** Edit 2 Apparently this breaks my 3g Data as well.... WTF
bwot75 said:
Gonna give this a shot....not being pushy, just asking, is there a mes version of the latest release in the works?... I dont know what happened, but I was running this fine (the Fascinate version) with the EC01 radio, then something happened, I did a Factory reset, and since then, any 2.3.4 MTD rom I flash is missing 3g Data. It keeps connecting and disconnecting, and will never actually transfer information almost like it will only connect to Verizons towers and will not register my 3g data...really bummed
Click to expand...
Click to collapse
If you have not yet try to reflash the eco1 radio and see if that fixes the issue. if not relash to ec10 stock and see if issue exists. if it fixes it then try and come back to the eco1 miui
col try dl09 radio im using it right now on my mez and its working fine..
I have tried everything to fix this data issue.. I have COMPLETELY wiped the phone and started from scratch (even re-activated it) re-partitioned and flashed EC10 flashed EC01 radio, factory reset, deifferent roms...it ONLY breaks with 2.3.4 MTD roms...I think I may try having US Cellular reset my phone....I dont know..frustration level is on the rise though lol... it all started when I went to do a factory reset on my phone, after it re-booted it forced me to do an activation (just like *228, but I didnt initialize it) and then 3g data was COMPLETELY broken..I fixed that, but since have not been able to make an mtd rom work
Any mtd aosp kernel should work. I have a few things on my plate at the moment so I haven't finished this or working on a update today.
As for the data. Gas says he has the issue also but I don't. Data works fine for me and was reported working for a few. So the only thing I can guess is perhaps something in your guys area is different in the network compared to say mine. Which possibly isn't handled right or just something missing. It could also be that a piece of code is incorrect or missing.
I really have no idea though as I am not in the loop for details on what is being done. How ever cm fixed the source for the apn issue and once I can track it down to what is causing it to happen we should have mms in miui and cm. Unless fixed already as I haven't been paying attention.
2fast4u88 said:
Any mtd aosp kernel should work. I have a few things on my plate at the moment so I haven't finished this or working on a update today.
As for the data. Gas says he has the issue also but I don't. Data works fine for me and was reported working for a few. So the only thing I can guess is perhaps something in your guys area is different in the network compared to say mine. Which possibly isn't handled right or just something missing. It could also be that a piece of code is incorrect or missing.
I really have no idea though as I am not in the loop for details on what is being done. How ever cm fixed the source for the apn issue and once I can track it down to what is causing it to happen we should have mms in miui and cm. Unless fixed already as I haven't been paying attention.
Click to expand...
Click to collapse
Thats ok...what annoys me the most is the fact that it WAS working for a while...then I royally F'd things up lol
bwot75 said:
Thats ok...what annoys me the most is the fact that it WAS working for a while...then I royally F'd things up lol
Click to expand...
Click to collapse
How are you doing a "factory reset", through CWM - right?
If you really want to help us figure this out you need to try and debug and pull log's so that we can try and locate the problem - MTD is obvoiusly VERY new so there is no "known" fixes or issues, so it's not going to be easy figuring out the problem.
When you're using odin to go to a FULL STOCK BUILD (meaning one without the added recoveries and root) are you checking the "repartition" box?
OK, three things,
1. This isn't an actual port.
2. Any and all Fascinate rom should work with this method.
3a. For TW roms, build.prop needs editing;
3b. For AOSP roms, /system/ect/ppp needs to be copied from a TW rom;
3c. For both, apns-conf.xml and coma-carriers-conf.xml need to be copied from a Mez rom.
So, yeah, not for the faint of heart, but that's what we get for being regional.
KillKount said:
OK, three things,
1. This isn't an actual port.
2. Any and all Fascinate rom should work with this method.
3a. For TW roms, build.prop needs editing;
3b. For AOSP roms, /system/ect/ppp needs to be copied from a TW rom;
3c. For both, apns-conf.xml and coma-carriers-conf.xml need to be copied from a Mez rom.
So, yeah, not for the faint of heart, but that's what we get for being regional.
Click to expand...
Click to collapse
Uh, not sure where this came from (meaning why you're posting it at this point) but a small correction to your list above would be - build.prop needs to be edited for ALL rom's tw/or AOSP based.
wait odin full ec10 then when it boots up *228 then after tht flash to mtd
KillKount said:
OK, three things,
1. This isn't an actual port.
First you are going to piss me off. As I believe you need to stick to trying to port w/e you were asking about not to long ago.
2. Any and all Fascinate rom should work with this method.
To the above and I have no clue wtf you are talking about.
3a. For TW roms, build.prop needs editing;
3b. For AOSP roms, /system/ect/ppp needs to be copied from a TW rom;
3c. For both, apns-conf.xml and coma-carriers-conf.xml need to be copied from a Mez rom.
Again you need to stick to w/e you do as you are doing a good job posting something you have no clue about. As any miui is port besides what is released for I think 4 devices maybe 5 is a port. You left out the roaming indicator. The apns isn't going to do **** when the mnc & mcc numbers are not picked up right hence the 00 when opening the apns via voice dialer. Third cm source was broke till yesterday and has been for a month where apn's wouldn't do you crap any way. Though miui doesn't have the issue as it is being built on a older nightly source code.
So, yeah, not for the faint of heart, but that's what we get for being regional.
Click to expand...
Click to collapse
Also since it is clear you don't have a clue about a port. As if you did you would notice more than that is changed. As since miui is built off cm. Cm things will work hence how I port it on the desire and others do on other devices. In turn the rom actually has a good bit from the cm7 rom for the mes in it. The build prop is also not the same and is actually fixed to set up stuff right on default. Along with I think I changed the vmheapsize to be what it should. I fixed the roaming indicator also. It will boot on the mes just sms will not work which I haven't fixed or messed with this since I let gas try it a few days ago.
Also I never claimed it to be a port to the mes. It is to a port and isn't. It is how ever a port of a port of a port from the device the rom is released for.
Now have a nice day
bdemartino said:
How are you doing a "factory reset", through CWM - right?
If you really want to help us figure this out you need to try and debug and pull log's so that we can try and locate the problem - MTD is obvoiusly VERY new so there is no "known" fixes or issues, so it's not going to be easy figuring out the problem.
When you're using odin to go to a FULL STOCK BUILD (meaning one without the added recoveries and root) are you checking the "repartition" box?
Click to expand...
Click to collapse
OK, here is exactly what I did....and I know I F'd up...I was on the first test of MIUI and everything was working perfec (what was supposed to be working) it was great, but I was taking a trip...so I flashed the stock EC10 (re-partitioned checked) flashed EC01, OTB kernel, miuiwiz 1.1.1 rom and all the fixins, later that day..or the next?..I was getting some FC errors...so I decided I was going to reset..so I did it from the ROM..(stupid stupid stupid)..not from CWM. When the phone re-booted it went directly to an activation screen and forced me to activate...stupid me I did it with all Verizon rom and radio..when it activated I had COMPLETELY lost 3G, to the point where there was no 3G indicator by the signal...after about a twenty minute curse filled rant, I decided to tryh something, I flashed EC10 again, but this time I also checked the Phone EFS clear box. What this did was remove my Phone number and MIN from the phone (and who knows what else it may have done, I havent been able to find definitive answers on that, well..now with all stock USC I did a *228 and the phone went through its initial provisioning, activated, and bingo...everything was back to normal, 3g was alive and kicking, ...then I went to flash the newest MIUI and started getting the latest 3G problems. I have a 3G indicator, but it never seems to be active (upload/download indicators not flashing), then the 3G indicator will dissappear then reappear, and do this randomly. when I try to use data, it just says that I have no network. However, if I do this same process, mbut instead I flash say MIUIWiz rom, everything still works, 3g and all.
I know that was a leangthy description, and I am sorry, but that is all I can give you right now...the wife is all over me to get back outside and mow the lawn and finish cleaning the pool LOL
2fast4u88 said:
Blah, blah, blah...
Now have a nice day
Click to expand...
Click to collapse
I'm sorry, I haven't actually dl'd this, I was just trying to give some basics as to how to get most, if not all, Fas roms working for us. And for the build.prop, most current aosp roms don't have but four lines concerning Verizon or Fascinate.
Again, I am sorry, I will shut up now.
bwot75 said:
OK, here is exactly what I did....and I know I F'd up...I was on the first test of MIUI and everything was working perfec (what was supposed to be working) it was great, but I was taking a trip...so I flashed the stock EC10 (re-partitioned checked) flashed EC01, OTB kernel, miuiwiz 1.1.1 rom and all the fixins, later that day..or the next?..I was getting some FC errors...so I decided I was going to reset..so I did it from the ROM..(stupid stupid stupid)..not from CWM. When the phone re-booted it went directly to an activation screen and forced me to activate...stupid me I did it with all Verizon rom and radio..when it activated I had COMPLETELY lost 3G, to the point where there was no 3G indicator by the signal...after about a twenty minute curse filled rant, I decided to tryh something, I flashed EC10 again, but this time I also checked the Phone EFS clear box. What this did was remove my Phone number and MIN from the phone (and who knows what else it may have done, I havent been able to find definitive answers on that, well..now with all stock USC I did a *228 and the phone went through its initial provisioning, activated, and bingo...everything was back to normal, 3g was alive and kicking, ...then I went to flash the newest MIUI and started getting the latest 3G problems. I have a 3G indicator, but it never seems to be active (upload/download indicators not flashing), then the 3G indicator will dissappear then reappear, and do this randomly. when I try to use data, it just says that I have no network. However, if I do this same process, mbut instead I flash say MIUIWiz rom, everything still works, 3g and all.
Click to expand...
Click to collapse
To half of what you did I have no idea what would happen or what it did lol. As for data gas said his doesn't work on any mtd release. Since this uses cm7mtd it also gives the same issue. On my phone if I sit next to the wall facing the hill. I get barely any service and it will do as you are saying. If I move away from the wall it is fine maybe a spaz out here and there.
KillKount said:
I'm sorry, I haven't actually dl'd this, I was just trying to give some basics as to how to get most, if not all, Fas roms working for us. And for the build.prop, most current aosp roms don't have but four lines concerning Verizon or Fascinate.
Again, I am sorry, I will shut up now.
Click to expand...
Click to collapse
No you came in here saying this wasn't a port. Where you had no idea what you were talking about clearly. I also never said anything about the build prop in aosp roms. Well nothing like that. I also have yet to see one thing you mentioned yet how do you get sms to work in a fas rom ported to the mes? Besides the radio? You have only said these few things which is half of it. Also nearly word for word from the guide I think gas posted or someone in the fascinate radio thread.
Honestly I have no idea why I am even talking about it besides the fact you made a post claiming out of no where. I didn't post this to have a noob claiming something that I really have no idea why. Though do a little searching the next time on miui and tell me what samsung device it is released for.
2fast4u88 said:
No you came in here saying this wasn't a port. Where you had no idea what you were talking about clearly. I also never said anything about the build prop in aosp roms. Well nothing like that. I also have yet to see one thing you mentioned yet how do you get sms to work in a fas rom ported to the mes? Besides the radio? You have only said these few things which is half of it. Also nearly word for word from the guide I think gas posted or someone in the fascinate radio thread.
Honestly I have no idea why I am even talking about it besides the fact you made a post claiming out of no where. I didn't post this to have a noob claiming something that I really have no idea why. Though do a little searching the next time on miui and tell me what samsung device it is released for.
Click to expand...
Click to collapse
Jesus man, smoke some weed and chill out. Yeah the guy was wrong (somewhat) but for crying out loud are you going to turn all of your threads into a pissing match? All we need is Adam back and we have the Phoenix thread all over again.
akellar said:
Jesus man, smoke some weed and chill out. Yeah the guy was wrong (somewhat) but for crying out loud are you going to turn all of your threads into a pissing match? All we need is Adam back and we have the Phoenix thread all over again.
Click to expand...
Click to collapse
You have a lot of room to talk. Last I heard you weren't using anything I do any way so why troll posting and add to the fire? As I didn't see anyone yanking your chain. I didn't start the adam crap to begin with yet you like putting it off as that I did. I also didn't post claiming miui isn't a port for what ever reason that has me baffled.
If you don't have some constructive to say. Then don't post. Along with the fact how would you like it if you actually did something for someone in two threads start claiming **** that isn't true. As it's really starting to get old. Then when someone bashes what you do on top of it. As in if it was that simple why didn't he do it?
Also that is all I got to say in which I said what I wanted to. Now the thread can get back on track.
2fast4u88 said:
You have a lot of room to talk. Last I heard you weren't using anything I do any way so why troll posting and add to the fire? As I didn't see anyone yanking your chain. I didn't start the adam crap to begin with yet you like putting it off as that I did. I also didn't post claiming miui isn't a port for what ever reason that has me baffled.
If you don't have some constructive to say. Then don't post. Along with the fact how would you like it if you actually did something for someone in two threads start claiming **** that isn't true. As it's really starting to get old. Then when someone bashes what you do on top of it. As in if it was that simple why didn't he do it?
Also that is all I got to say in which I said what I wanted to. Now the thread can get back on track.
Click to expand...
Click to collapse
LOL point proven. You really need to learn to ignore some things. It's a message board, people are going to say things that may not be accurate. And really at no point did you mention this was a port or give credit to Andmer or any of the Fascinate people that did the MIUI port for the Fascinate. If you didn't get this from them then I really don't know why you spent the time to port this yourself as you are already using their radio. It would have been much easier just to change Andmer's MIUI to work for the Mes. Again man I am not trying to argue with you, I just think it's funny you get so worked up about this stuff. Deep breaths.
S'okay guys, no need to even worry about it. I'll get things taken care of tonight. I won't post more here, this is 2fast's thread, his work.
akellar said:
LOL point proven. You really need to learn to ignore some things. It's a message board, people are going to say things that may not be accurate. And really at no point did you mention this was a port or give credit to Andmer or any of the Fascinate people that did the MIUI port for the Fascinate. If you didn't get this from them then I really don't know why you spent the time to port this yourself as you are already using their radio. It would have been much easier just to change Andmer's MIUI to work for the Mes. Again man I am not trying to argue with you, I just think it's funny you get so worked up about this stuff. Deep breaths.
Click to expand...
Click to collapse
Ok I did this the other day and haven't messed with it much. Not sure I would recommend it for daily use. As landscape, gps and some other minor issues are present. This also isn't for the showcase. This started out as a mix of the Fascinate port/Cm7 Mtd for the mesmerize. Then a mix of miui android. So credit goes to them guys though it has some stuff done by myself
^First post very first sentence

Google Play Broken Beyond Repair?

I have tried a few custom roms and then when I reflash back to any of the 3 stock roms floating out there for the GS3 Verizon my Google Play Store remains permanently broken. Alogcat indicates that it is getting back an unexpected response code 400 from google. I suspect this may mean that it fails to update because SSL is broken in some way but I could be wrong.
I have done all the normal things one does to bring back the market such as clearing the data on Google Play and services framework and rebooting, but that has no positive effect. Nor does deleting my account and re-adding it or creating a new account. Also Google+ will say "No Connection" but once I close out of it and reopen it, it will always log in to my account automatically without error. I will say that the error is reminiscent of the kind of error you would expect if your time is wrong, but it is correct. Any help will be appreciated it..
Go post in Q&A Forum.
iSheep... iSheep... Meowww that's Apple
This does not belong in development.
Sent from my Galaxy SIII
considering that out of all the roms I have tried Play now only works in one of the many roms posted here.. I feel like it is connected.
http://goo.im/devs/invisiblek/i535/roms/cm10.unofficial.nightlies build 20121005 is the only rom I can flash on my device now and having a working Google Play but I absolutely hate this rom. It has bugs, it lacks polish.. yet it also seems as if it screwed up Play in some way on my device... so please install this rom and tell me I should be posting somewhere else.. where everyone only discusses the usual methods of fixing Play and no one takes any real steps to really debug the problem to get to the root of it.
glitchbit said:
considering that out of all the roms I have tried Play now only works in one of the many roms posted here.. I feel like it is connected.
http://goo.im/devs/invisiblek/i535/roms/cm10.unofficial.nightlies build 20121005 is the only rom I can flash on my device now and having a working Google Play but I absolutely hate this rom. It has bugs, it lacks polish.. yet it also seems as if it screwed up Play in some way on my device... so please install this rom and tell me I should be posting somewhere else.. where everyone only discusses the usual methods of fixing Play and no one takes any real steps to really debug the problem to get to the root of it.
Click to expand...
Click to collapse
Doesn't matter if you have the issue on every rom it doesn't belong in the development section. Take the real step of posting this in the proper section.
Sent from my Galaxy SIII
I would have to agree seems like the good place to post it since we are all flashing roms and they bare having this issue... I was pleased to see this here as in have been having this issue on synergy 74 and up and now I see it's others so now all the developers will be aware of what's going on and maybe find a fix
Sent from my SCH-I535 using xda app-developers app
READ FORUM RULES BEFORE POSTING
Development is for Developers to post threads
Questions go in Q&A
Thread moved
Moderator
I love how people comment in a thread telling you that you posted in the wrong section, but don't offer up any advice.
I don't know a whole lot about your issue, but instead of flashing a stock rom maybe you could odin back to stock, accept OTA, and start over?
Not sure if that would clear up your issue, but hope I helped...!
josh995 said:
I love how people comment in a thread telling you that you posted in the wrong section, but don't offer up any advice.
I don't know a whole lot about your issue, but instead of flashing a stock rom maybe you could odin back to stock, accept OTA, and start over?
Not sure if that would clear up your issue, but hope I helped...!
Click to expand...
Click to collapse
Thanks Josh, but yea I have been flashing back to stock via Odin a lot, more times than I can count now! I've been using the HOME_I535VRALF2_I535VZWALF2_618049_REV09_user_low_ship.tar.md5 image file but Kies says it is the most recent as well so there is no newer OTA to come down. I've also tried LG and HD roms via Odin, but regardless the Google Play Store remains broken. I am positive that I have restored everything back to its original configuration as per multiple guides on the subject. It is extremely frustrating as I have spent countless hours now trying to fix this one issue. I've spent more time researching this issue on google, in the forums and irc chat rooms and speaking with more devs than what those people would care to know about. There is a serious issue here that is being ignored.
I develop iPhone apps, I do IT support, and network infrastructure for a large manufacturer and I always get a great deal of enjoyment figuring things out but something like this, which should be so simple and just work, ticks me off to no end. For me this just creates the case in point why it makes it difficult for me to care much for the Android platform as a whole. It still has a lot of growing up to do before it catches up with iOS. I use a phone to get from point A to point B and I expect a certain baseline level of performance and things to just work. I left the platform 2 years ago and from the outside it looked as though things have been improving, but I can see now that not much has changed in the OS or community and the platform isn't ready for much of anything beyond a tablet for me personally as it is just a no go as a phone OS.
I would really like to figure this out still.. so to the first person who can give me the resolution or help me significantly in some way I will gift $50 to you over paypal.
Arriving at a solution
glitchbit said:
I would really like to figure this out still.. so to the first person who can give me the resolution or help me significantly in some way I will gift $50 to you over paypal.
Click to expand...
Click to collapse
Well, you don't seem to be flashing a Base ROM using Odin. It being broken like that usually indicates DPI issues, which are carrying across ROMs.
1. Is your phone encrypted? (Do a reset and Erase everything from within, that should fix it) Settings > Backup and Reset > Reset
2. Is the ROM you are flashing using Odin a Base FW?
I had this happen on an old incredible. What it turned out being was that my phone wasn't activated. I don't think that is your problem because it sounds like you use it, but could be a corrupted area of the phone that flashing doesn't touch. I don't think its a ROM because I've flashed them all and my market has always worked.
I would try a couple things to see if either helps. First, Odin back to stock then turn you phone off pull the sim card, boot back up and let it settle, power off put the sim back in and power up. Second, if that doesn't work dial *2767*3855# to repo vision your phone, but this factory resets and people say it erases your internal SD card so back that up. Hope one of those help.
Also if neither of those work, try a new sim card. That seems to fix 90% of peoples problems on this phone.
Sent from my S3 running Eclipse 2.1
kintwofan said:
I had this happen on an old incredible. What it turned out being was that my phone wasn't activated. I don't think that is your problem because it sounds like you use it, but could be a corrupted area of the phone that flashing doesn't touch. I don't think its a ROM because I've flashed them all and my market has always worked.
I would try a couple things to see if either helps. First, Odin back to stock then turn you phone off pull the sim card, boot back up and let it settle, power off put the sim back in and power up. Second, if that doesn't work dial *2767*3855# to repo vision your phone, but this factory resets and people say it erases your internal SD card so back that up. Hope one of those help.
Sent from my S3 running Eclipse 2.1
Click to expand...
Click to collapse
kintwofan, you may be on to something. I have flashed the 3 base roms for my phone G7, LG, and HD to no avail. I actually use this phone on another carrier and so I have manually programmed this phone myself. So there may be something regarding the activation that is causing this issue.
glitchbit said:
kintwofan, you may be on to something. I have flashed the 3 base roms for my phone G7, LG, and HD to no avail. I actually use this phone on another carrier and so I have manually programmed this phone myself. So there may be something regarding the activation that is causing this issue.
Click to expand...
Click to collapse
Sounds like may need a buildprop change. Try changing buildprop to your carrier. Although one of my rezounds is on Tmobile without problems. Using T-mobile APN. S3 should auto add the APN. At least it does with international sim.
Use market enabler then to see if you can tell it your carrier. I'm sure you can Google the apk
You could also still do the reprovision, but I'm sure you'll have to reprogram it.
Sent from my S3 running Eclipse 2.1
Market enabler didn't work on synergy 74
Sent from my SCH-I535 using xda app-developers app
GREGHARKINS said:
Market enabler didn't work on synergy 74
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I assume you're on Verizon so did you try the other suggestion I posted? I used to run synergy with no problem so I would assume something got corrupted on your phone in a segment that isn't flashed.
Sent from my S3 running Eclipse 2.1
OTA attempts to activate this phone on the carrier fails, hence the manual programming. I have tried market enabler and and market unlock but they fail to work in the stock roms and the synergyrom. The only rom that has a working Market/Play is http://goo.im/devs/invisiblek/i535/roms/cm10.unofficial.nightlies I specifically used 1005 and 1012 and they both work fine.
I don't know what he does differently but it works for whatever reason.. http://forum.xda-developers.com/showthread.php?t=1788443
I just don't really care for the rom, it seems like my reception and wifi has issues on it vs the stock.
glitchbit said:
OTA attempts to activate this phone on the carrier fails, hence the manual programming. I have tried market enabler and and market unlock but they fail to work in the stock roms and the synergyrom. The only rom that has a working Market/Play is http://goo.im/devs/invisiblek/i535/roms/cm10.unofficial.nightlies I specifically used 1005 and 1012 and they both work fine.
I don't know what he does differently but it works for whatever reason.. http://forum.xda-developers.com/showthread.php?t=1788443
I just don't really care for the rom, it seems like my reception and wifi has issues on it vs the stock.
Click to expand...
Click to collapse
Interesting, so the reprovision didn't work? Have you tried just pulling the play store from his gapps? Also, you could try his jellywiz ROM maybe he did the same thing to it were your play works, if you like touchwiz. I guess you could also upload the build.prop from that working ROM and I'll compare it to mine when I get time and see if I notice any major differences.
By the way have you tried Eclipse ROM, its very nice and bug free.
Sent from my S3 running Eclipse 2.1
Still looks probably to be a buildprop vs carrier change issue. CM is built off source and works and the TW roms are built off different carrier bases and don't work. Playstore looks at the buildprop.

Categories

Resources