Database Info

Nandroid Backup, HELP

Hello everyone,
I have succesfully rooted my Sprint Hero, I am even using a cache app that you have to be rooted to use so I KNOW I am rooted. The only problem is NO MATTER WHAT I try I can not successfully flash the recovery img. It shows as flashing ok but when I go to boot in recovery it either flashes the HTC sign real quick then dies or stays on the HTC screen and doesnt do anything. Ive literally been trying this for 2 days now! Ive rerooted 10 times, Ive tried as many different recovery imgs for CDMA that I could find and I STILL get the same result. I even switched sd cards!! Could there be a problem with my phone thats not allowing it to work? Someone please help this is driving me nuts! Im ready to return the phone and get a new one just to try it,LOL!!PPlease help??

What images have you tried?

Just ones Ive found around the internet. Most of them were recovery-RA-heroc-v1.2.3.img

How are you trying to install it?
Flashrec?
flash_image?

Anyone??? Please?????Im about to return it and try again Id hate to find out it was something simple cuz this Hero has been perfect except for this problem, which is pretty useless to have it rooted if I cant flash, And I wont be able to update if sprint has an update also correct??

packetlss said:
How are you trying to install it?
Flashrec?
flash_image?
Click to expand...
Click to collapse
I follow f directions online that I go into cmd and get to the root and type" flash_image recovery /sdcard/recovery-RA-heroc-v1.2.3.img, when I hit enter all that happens is it shows exactly what I typed AGAIN then just #
So it will look like this:
#flash_image recovery /sdcard/recovery-RA-heroc-v1.2.3.img
flash_image recovery /sdcard/recovery-RA-heroc-v1.2.3.img
#
Then when I type reboot recovery it just reboots and shuts off, so Ill pull the battery and try the hardware method power volume down and it does THE SAME thing or it will just stay stuck on the HTC screen.

Do it like that.
then then use the:
"reboot recovery" command on the # prompt. See if that helps.

packetlss said:
Do it like that.
then then use the:
"reboot recovery" command on the # prompt. See if that helps.
Click to expand...
Click to collapse
Ya I did that, same thing happened. ):

One last try.
Redownload the the image from this post: http://forum.xda-developers.com/showthread.php?t=581521
Download md5sum.exe from this site: http://www.etree.org/md5com.html
Save it in them in same folder as you have the adb command in.
Then from the command line run:
md5sum recovery-RA-heroc-v1.2.3.img
It should output something like this:
0bdcea0f2c734035ba960d76aba0fa6a *recovery-RA-heroc-v1.2.3.img (Don't forget to copy it to the sdcard again )
Bolded text is the checksum of the file, it should match perfectly or your image is damaged.
If the checksum is the same, try flashing it again.

ahh i see clearer now.....
yes as suggested in the last thread you posted in... do a sprint RUU and try agian... this will put you at a known good baseline.... follow steps exactly...
as a added measure to cancel the option of bad sd card, get an external micro sd card reader and format it in windows as fat32

johnsongrantr said:
ahh i see clearer now.....
yes as suggested in the last thread you posted in... do a sprint RUU and try agian... this will put you at a known good baseline.... follow steps exactly...
as a added measure to cancel the option of bad sd card, get an external micro sd card reader and format it in windows as fat32
Click to expand...
Click to collapse
I actually already formatted to fat32,lol. How do I flash RUU??? To start over?

packetlss said:
One last try.
Redownload the the image from this post: http://forum.xda-developers.com/showthread.php?t=581521
Download md5sum.exe from this site: http://www.etree.org/md5com.html
Save it in them in same folder as you have the adb command in.
Then from the command line run:
md5sum recovery-RA-heroc-v1.2.3.img
It should output something like this:
0bdcea0f2c734035ba960d76aba0fa6a *recovery-RA-heroc-v1.2.3.img (Don't forget to copy it to the sdcard again )
Bolded text is the checksum of the file, it should match perfectly or your image is damaged.
If the checksum is the same, try flashing it again.
Click to expand...
Click to collapse
Where do I input that? Once I get in root?
I did adb shell
$su
#md5sum recovery-RA-heroc-v1.2.3.img
it says md5sum not found

No, md5sum in run before you do the adb shell command (it's a normal PC program).

aaron130 said:
Where do I input that? Once I get in root?
I did adb shell
$su
#md5sum recovery-RA-heroc-v1.2.3.img
it says md5sum not found
Click to expand...
Click to collapse
windows command line not adb shell.... make sure you are in the directory in which you downloaded md5sum

obdcea0f2c734035ba960d76aba0fa6a *recovery-RA-heroc-v1.2.3.img
thats what happened Good??

That is the correct checksum.
Try and flash that one.

Nope Same DAM thing it gets stuck at htc or htc then quits and shuts off

I'm out of ideas then. Could be that it's broken, unless someone else has the same problem. (Haven't seen any of that though).

packetlss said:
I'm out of ideas then. Could be that it's broken, unless someone else has the same problem. (Haven't seen any of that though).
Click to expand...
Click to collapse
Thx Im flashing the RUU now. Thx for your help though I appreciate it alot!!

HowTo re-flash the recovery image after old 2.1 RUU

This guide was taken from AndroidCentral and I thought I would share it here because it's taken me 4 hours this morning to figure out why I was having so many problems trying to flash a recovery image when I know my phone was rooted and flashed in order to get 2.1 a month or so ago. I have been searching these forums and google and hope anyone else who has my issue finds this post.
1. Make sure you have the Android SDK installed.
2. Download flash_image.zip
3. Download recovery-RA-heroc-v1.5.2.img
4. Unzip the first file, and place both in your Android SDK/tools folder.
5. Make sure USB debugging is ON
6. Connect your phone to the PC
7. Open the command window and navigate to the Android-sdk/tools folder on your computer.
8. At the prompt enter the following, one line at a time followed by enter
Code:
adb shell
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
exit
exit
adb push flash_image /system/bin
adb push recovery-RA-heroc-v1.5.2.img /sdcard
adb shell
chmod 0755 /system/bin/flash_image
reboot
9. Your phone will reboot. When it is finished, back at your command window, once again enter
Code:
adb shell
su
cd /sdcard
flash_image recovery recovery-RA-heroc-v1.5.2.img
reboot recovery
10. With any luck, you'll have the recovery image back and can load custom 2.1 based ROMS again.
Hope this helps. All credit goes to gbhil at Android Central.

You might want to change the title of the post. People might get confused thinking you found a way to downgrade the hboot and not how to flash the recovery image.

Can't get it to work.
I ran the RUU earlier.
Tried to root the old way.......didn't work.
Just tried this to get the recovery image back.
At the SU command it says: permission denied
Thanks,
Bubba.

bubbacs1 said:
Can't get it to work.
I ran the RUU earlier.
Tried to root the old way.......didn't work.
Just tried this to get the recovery image back.
At the SU command it says: permission denied
Thanks,
Bubba.
Click to expand...
Click to collapse
This won't work for the leak that was put out today. You lost root. This process requires root.

bubbacs1 said:
Can't get it to work.
I ran the RUU earlier.
Tried to root the old way.......didn't work.
Just tried this to get the recovery image back.
At the SU command it says: permission denied
Thanks,
Bubba.
Click to expand...
Click to collapse
If you used the new RUU that was leaked today you're screwed. The older 2.1 leaks were test ROMs that were already rooted so you could use the instructions above to flash the RECOVERY. Notice recovery in bold, not bootloader. Once hboot is updated there is no known way to downgrade so you could use an older RUU file.

This rom has no root. There is NO WAY to re-root after flashing the newest RUU. I'm sorry to say... you're ****ed.

HeroMeng said:
This rom has no root. There is NO WAY to re-root after flashing the newest RUU. I'm sorry to say... you're ****ed.
Click to expand...
Click to collapse
So they can't run an older ruu with 1.5?

HeroMeng said:
This rom has no root. There is NO WAY to re-root after flashing the newest RUU. I'm sorry to say... you're ****ed.
Click to expand...
Click to collapse
To clear that up, if you run the RUU you have no root. If you extract the ROM, set it up, and flash it, you will preserve root, just like damageless made for all of us. But, yeah, you are not gonna be able to get back from this one. at least until someone figures it out.

I changed the thread title to hopefully alleviate some confusion. I didn't realize there was a newer RUU released.
I flashed the Damageless Rom and it's running smoothly so far, but I'm still trying to figure out why wifi tethering isn't working out for me. :-(

celemew2 said:
I changed the thread title to hopefully alleviate some confusion. I didn't realize there was a newer RUU released.
I flashed the Damageless Rom and it's running smoothly so far, but I'm still trying to figure out why wifi tethering isn't working out for me. :-(
Click to expand...
Click to collapse
Did you get wifi tether version 1_60? That's the only version that ever worked for me.

Yeah, I have 1.60 installed on my phone right now, but when I try to start tethering, a SU Request black screen comes up and nothing happens until I get an error, "Activity SU Request (in application Superuser Permissions) is not responding."
I'm sure there's an answer somewhere, but lately I haven't been having luck searching for it.
Edit:
Thank you 98classic! All I had to do was enable USB Debugging. (I had it turned off cause I didn't like the warning up top when my phone was plugged into the computer)

"flash_image not found" what the f**k

need the binary? physically check its there with a root explorer
Sent from my broken Typewriter!!!

or do this download and set up the android SDK it itself includes the flash_image binary. after that u will need to open a command prompt on your computer u will have to change directory to platform tools
cd /path/to/platform-tools
after that u will get the chance to do
flash_image recovery /path/to/recovery.img
that will flash the recovery
now reboot into recovery
Typed from my broken Typewriter!!!

Clockwork Recovery for Coby Kyros MID-7015--Updated

All credit for this goes to Razor950
Coby Kyros MID-7015
Download recovery.img from Sendspace.com - send big files the easy way
use flash_image and flash recovery to tablet. (ex flash_image recovery /sdcard/recovery.img)
Navigating:
Home is down
Menu is select
Back is back
Everything works and I'll post stock nandroid dumps on here soon.
Update some are reporting that they are unable to Flash to the recent firmware update that was posted
on the coby website do to the clockworkmod being installed.
Thanks to Kasten for coding this then thanks to adamdietrick for creating a new zip
That can be flashed with the clockworkmod installed.
Clockworkmod Coby Firmware update
Donate if you like Razor950's work!

thanks for posting
any issues that anyone gets with this recovery, please pm me.
enjoy

havic said:
Everything works and I'll post stock nandroid dumps on here soon.
Donate if you like Razor950's work!
Click to expand...
Click to collapse
Here's my backup
http://www.megaupload.com/?d=5ALHYN80

You must be rooted (I assume z4root or universal android root works)
then either using terminal (grab terminal app from market) or using adb.
Grab the recovery.img and drop it into sdcard via usb or adb push.
Open terminal and type su and then flash_image recovery /sdcard/recovery.img
or if using adb, its adb shell and then su and then flash_image recovery /sdcard/recovery.img
Note: I am not the best at writing noobie guides but hopefully it helps

Thanks for this. I do not have mine yet( lol, just ordered it) but I donated for your work!
Thanks!

Anyone have a idea on how to get back into recovery? I have it installed but have tried holding every button to get me back and nothing kinda sucks since I have been testing new mods for this and cant get to my backup because the first shot at the mod was a fail.

I was able to get clockwork installed thanks to you. Do you know of any images that are out for the 7015?

Lawful123 said:
I was able to get clockwork installed thanks to you. Do you know of any images that are out for the 7015?
Click to expand...
Click to collapse
Aside from stock(rooted) dump, there is nothing, I'll work with havic to get a rooted dump with google apps(market mostly) working correctly.
Besides that there is nothing else from my end for now. I personally don't like telechip tablets, bad experience from a gentouch :X
Also telechip company are retards and don't release kernel source, it'd help developers optimize a 2.1 rom and also be able to port kernel to a newer one for 2.2

I can see that this model gained popularity this black Friday. We are just now starting to see android tablets hit " Joe User ". I think that the telechip tabs will become popular so long as the price is on point. Thanks for all you do.

what exactly is this recovery for?
does installing this offer me additional features, or is it merely what we would restore to in case of disaster?

Deenybird said:
what exactly is this recovery for?
does installing this offer me additional features, or is it merely what we would restore to in case of disaster?
Click to expand...
Click to collapse
For now it is a good way to backup your unit so that if you screw it up you can go back. In the future people will make images for it. Hopefully someday android 2.2

Which version of flash_image tool is needed to flash this recovery or is the tool stock on the tablet?
EDIT: figured it out. stock. Looking through the dump now =)

adamdietrick said:
Here's my backup
http://www.megaupload.com/?d=5ALHYN80
Click to expand...
Click to collapse
If you try and recover from the backup that is in the link you may or may not get a error.The error is md5 mismatch. So the recovery fails to install.
What needs to be done is need to have busybox installed then shell in and run the following commands.
This has to be ran from the dir. that contains the backup files.
Which will more than likely be similar to this
/sdcard/clockworkmod/backup/2010-12-01.20.41.18
#busybox md5sum -c nandroid.md5
boot.img: OK
cache.img: OK
data.img: OK
recovery.img: OK
system.img: OK
# reboot recovery
reboot recovery
Once in clockwork then run a recovery.
If you have a Issue let me know I will try my best to get you some answers.

razor950 said:
You must be rooted (I assume z4root or universal android root works)
then either using terminal (grab terminal app from market) or using adb.
Grab the recovery.img and drop it into sdcard via usb or adb push.
Open terminal and type su and then flash_image recovery /sdcard/recovery.img
or if using adb, its adb shell and then su and then flash_image recovery /sdcard/recovery.img
Note: I am not the best at writing noobie guides but hopefully it helps
Click to expand...
Click to collapse
When I type this it it says its file not found.
I double checked and in astro I see
sdcard/recovery.img
any ideas?

beccaannabell said:
When I type this it it says its file not found.
I double checked and in astro I see
sdcard/recovery.img
any ideas?
Click to expand...
Click to collapse
where are you when you type that? does it not find the flash_image binary or the .img?

Worked for me
I got it working by doing the following.
1. Download and installed "Android Terminal Emulator" on to the device.
2. Download and installed Z4Root 1.3.0.apk from here http://forum.xda-developers.com/showthread.php?t=833953
3. Run it and pressed the "Permanent Root" button. It took a bit and it auto rebooted.
4. Place the recovery.img on the root of my sd card. (Razor950's recovery.img is from post#1 on this thread.)
5. Opened "Android Terminal Emulator".
6. Entered the following.
su
flash_image recovery /sdcard/recovery.img
7. Locked everything up for about 5 min and it went back to # prompt when it was done.
8. I powered off the device.
9. After it turned off I pressed and held the back button then pressed the power button. Kept holding it until you see clockworkMod v2.5.1.3. (If it says Android it's too late.)
I have a question myself what is sd-ext on clockwork? Also is there a way to do a selective backup? Just system with no data?
Thanks.

Thanks for your procedure, will try it when I receive my tablet.
Regarding your question about sd-ext, it's a partition of your sdcard. One will be in fat32 and the other in ext2 or ext3. Usually ext2 is used when you have app2sd or 12sd+. The purpose of this is to have more apps in install by installing them on your ext partition instead of internal memory. I use it for my HTC desire (smartphone)
Regarding your second question, I don't know anyway of doing a backup without data but pretty sure it's possible, for example, if you go in your Android do a factory reset. reboot in recovery then do your backup. Not sure if there's another way to do it

Yezir!
Kasten said:
I got it working by downing the following.
1. Download and installed "Android Terminal Emulator" on to the device.
2. Download and installed Z4Root 1.3.0.apk from here http://forum.xda-developers.com/showthread.php?t=833953
3. Ran it and pressed the "permit root" button. It look a bit and it auto rebooted.
4. Place the recovery.img on the root of my sd card.
5. Opened "Android Terminal Emulator.
6. Entered the following.
su
flash_image recovery /sdcard/recovery.img
7. Locked everything up for about 5 min and went back to # prompt when done.
8. Powered off device.
9. Press and held the back button then pressed the power button. Kept holding it until I saw clockworkMod v2.5.1.3. (If it says Android its too late)
I have a question myself what is sd-ext on clockwork? Also is there a way to do a selective backup? Just system with no data?
Thanks.
Click to expand...
Click to collapse
this is perfect!!!!! thanks for thinking of us dummies

Daali said:
where are you when you type that? does it not find the flash_image binary or the .img?
Click to expand...
Click to collapse
same thing for me
"error opening /sdcard/recovery.img:No such file or directory"
Help

noonerealy said:
same thing for me
"error opening /sdcard/recovery.img:No such file or directory"
Help
Click to expand...
Click to collapse
Can you see the recovery.img on your sd card from a file manger app like Astro? If so when your in the terminal can you cd to /sdcard? If so can you enter ls -l recovery.img? Check the size to make sure it is all there.
I have anther question myself.
At cobyusa.com/?p=prod&prod_num_id=10498&pcat_id=1013 there is a firmware update. in the update.zip in system in the build.prop file i see a line that says "ro.build.version.incremental=eng.enzo.20101125.200217". I notice that the build number on the device says "MID7015 1.6a_20101105-2". Looks like they may have changed somethings but not sure what. What would be bet best way to figure out what they changed?
I tried to run it from clockwork and i get
assert failed: getprop("ro.product.device") == "tcc8900" || getprop("ro.build.product") == "tcc8900"
E:Error in /sdcard/update.zip
(Status 7)
Installation aborted.
To install this update would I just have to unroot my device? Not sure how to look what the current ro.build.product is now.
Thanks.

TF101 booting into Recovery

Hi.
First, I'd like to say I tried searching but no luck.
Second, I'm a total Asus noob. I'm pretty good with my HTC Legend, but I don't quite understand the transformer.
My problem: It boots directly into recovery. I bought it used, and it was rooted and running ARHD. When I bought it the seller showed me how to boot it : Boot it regularly, then select "reboot" in recovery, hold "vol-" and it boots into some sort of "menu" where I should press "vol+" to do a cold boot. This is necessary every time. He claimed that all rooted Transformers were like this; I highly doubt that.
So, is there any way I can make it boot normally?

He got it into a boot-loop, you can try fixing it by running my One-Click PERI tool, and then choosing the 'fix-bootloop' option.
This is not normal for rooted transformers, but is a very common and relatively easy to fix problem.

Thing O Doom said:
He got it into a boot-loop, you can try fixing it by running my One-Click PERI tool, and then choosing the 'fix-bootloop' option.
This is not normal for rooted transformers, but is a very common and relatively easy to fix problem.
Click to expand...
Click to collapse
Downloaded, but ADB doesn't recognize my TF101 (adb devices returns nothing)
Tried installing the supplied .inf , but it isn't supported (Windows echoes "The selected INF-file does not support this installation method") and nothing is changed.
So I guess I need some drivers now..
EDIT: Okay, I got the drivers working thanks to Brk's rootkit.
Ran your tool, with "u" as first argument.
Finished without problems.
Still goes to recovery and not booting Android.
Tried applying the "r" option, still boots into CWM 5.5.0.4.
EDIT2: New touch recovery installed, new ROM flashed but still no instant boot.

Ok good, you got out of the bad CWM.
Now you need to reflash your bad bootloader, goto the asus tf101 site, pick download, android, firmware. Then find the firmware for your Region (it'll be WW I believe)
download blobunpack from either searching 'windows' in rayman's blobtools thread or downloading the blob.zip from my boot splash change guide, take the new firmware, unzip the file called 'blob' to a folder with blobunpack.exe in there, then open cmd and cd to the folder, then run 'blobunpack blob', the blob will now be split into many smaller blobs. What you'll want to do is take the one named blob.EBT, then put it on the root of your transformer's INTERNAL storage (So either adb push blob /sdcard/) or use windows to just place it there.
Then go into adb shell or terminal emulator app and type"
Code:
su (Grant root if it asks)
dd if=/sdcard/blob of=/dev/block/mmcblk0p4
reboot
It will reboot, you'll see a blue bar for just a moment, then it reboots again, and *Hopefully* won't get stuck.

Thing O Doom said:
Ok good, you got out of the bad CWM.
Now you need to reflash your bad bootloader, goto the asus tf101 site, pick download, android, firmware. Then find the firmware for your Region (it'll be WW I believe)
download blobunpack from either searching 'windows' in rayman's blobtools thread or downloading the blob.zip from my boot splash change guide, take the new firmware, unzip the file called 'blob' to a folder with blobunpack.exe in there, then open cmd and cd to the folder, then run 'blobunpack blob', the blob will now be split into many smaller blobs. What you'll want to do is take the one named blob.EBT, then put it on the root of your transformer's INTERNAL storage (So either adb push blob /sdcard/) or use windows to just place it there.
Then go into adb shell or terminal emulator app and type"
Code:
su (Grant root if it asks)
dd if=/sdcard/blob of=/dev/block/mmcblk0p4
reboot
It will reboot, you'll see a blue bar for just a moment, then it reboots again, and *Hopefully* won't get stuck.
Click to expand...
Click to collapse
This pad is bought in the US. So I guess I should go with the US file?
Edit: Went for the US file, extracted blob.EBT, tried your command in the Terminal Emulator (i had to add ".EBT" after if=/sdcard/blob to make it work) but it still didn't- It moved the file, and I typed in "reboot". It rebooted, but no blue bar and I went straight to recovery. Trying again, but I doubt it will be any different.
Edit2: Nope, same sh*t. Getting kinda annoyed now...

No you don't want .ebt
You want the file to jsut be 'blob'
You may want to run roach's fix directly after, run the above, then also type:
Code:
dd if=/dev/zero of=/dev/block/mmcblk0p3
Then reboot.

Thing O Doom said:
No you don't want .ebt
You want the file to jsut be 'blob'
You may want to run roach's fix directly after, run the above, then also type:
Code:
dd if=/dev/zero of=/dev/block/mmcblk0p3
Then reboot.
Click to expand...
Click to collapse
Oh thank you very much,this worked. The trick was to let the blob be extensionless.
However, I saw no blue bar, but it booted without going into recovery atleast

Glad it's finally working right
Go call the seller and complain >.<

Thing O Doom said:
Glad it's finally working right
Go call the seller and complain >.<
Click to expand...
Click to collapse
I thought it was solved, but no.
This comes back every time something in CWM is flashed - flashed a bootanimation, it came back, i ran your commands and it was solved. Flashed a new kernel now, it came back.
Ran the commands, it went away but I noticed my kernel wasn't changed and I can't overclock... I think I have a bad CWM accually.

You need to reflash a working CWM recovery then, I take it you're on that infernal ROM manager version. I'd flash Rouge XM 1.5 touch

Thing O Doom said:
You need to reflash a working CWM recovery then, I take it you're on that infernal ROM manager version. I'd flash Rouge XM 1.5 touch
Click to expand...
Click to collapse
Tried PERI but apperantly I cant give ADB SU rights, because wrote failed at /dev/block/mmcblk0p4 because of denied permissions.
Can I use dd to flash it like I did previousley?
Edit: I looked at the sauce of PERI and saw that it was flashing using a shell and DD so I entered it in a regular elevated ADB shell. Finally saw that blue bar I've been looking for and I have Team Rouge's (5.0.2.8) 1.5.0 recovery now. Thank you very much.

Actually, the same has happened to be, and i was trying to go back to stock ww, and i seem unable to find some kind of tutorial for that... I will try what was posted here at least to remove that initial loop.

MarkInDaPark said:
Tried PERI but apperantly I cant give ADB SU rights, because wrote failed at /dev/block/mmcblk0p4 because of denied permissions.
Can I use dd to flash it like I did previousley?
Edit: I looked at the sauce of PERI and saw that it was flashing using a shell and DD so I entered it in a regular elevated ADB shell. Finally saw that blue bar I've been looking for and I have Team Rouge's (5.0.2.8) 1.5.0 recovery now. Thank you very much.
Click to expand...
Click to collapse
Running PERI In CWM always gives root access x)
Try doing the fix bootloop function inside cwm.
Nice to see that you figured it out!

Thing O Doom said:
No you don't want .ebt
You want the file to jsut be 'blob'
You may want to run roach's fix directly after, run the above, then also type:
Code:
dd if=/dev/zero of=/dev/block/mmcblk0p3
Then reboot.
Click to expand...
Click to collapse
That did the trick for me, my "boot direct to recovery" problem started when I accidentely selected Reboot to recovery under Advanced when I was "on that infernal ROM manager version" of recovery.

im having similar problems ..... Yep i updated CWM via ROM Manager to 5.8.3.4 (although since managed to downgrade it in theory to 5.8.2.1)
only way i can get into full Android is via a cold boot (but then i have no SD card or Wifi support) or by flashing a full new ROM each time I reboot !!!
problem i have is that im on my holidays and have no access to a PC
Google brought up a patched CWM version but even after flashing that in recovery it was still booting straight into CWM.

Well you r on holiday so can't do anything now... when you come back home try easy flasher to unroot and root again by that way you can get rid of that recovery....
Sent from my Transformer TF101 using xda app-developers app

RUU File for RADIO-26.17.14.11_M

Hi,
I have the HTC Inspire 4g with:
Software #: 3.20.502.52 710RD
Android Version 2.3.5
HTC Sense 3.0
Baseband version: 12.69a.60.29u_26.17.14.11_M
I have unlocked the bootloader using htcdev and have successfully rooted the the device but i'm still S-ON. I have tried installing some custom ROMs however after flashing the device did not boot. I understand that I have to flash the boot.img file located in the .zip file of the custome ROM. That I know how to do... My concern is that I want to try out some ROMs but as a precaution I would like to have the stock RUU file for the type device I have should I need to restore it.
I did create a backup of my ROM and have used it previously to restore the phone after installing the custom roms that haven't boot. I just want to know if I flash the boot.img file will a restore bring it back to where it was before the flash or do i need the RUU file to restore stock?
If the later please advice where I can find that particular file as I've searched but can't seem to find the one to use.
Thanks a million.
360fifa

360fifa said:
Hi,
I have the HTC Inspire 4g with:
Software #: 3.20.502.52 710RD
Android Version 2.3.5
HTC Sense 3.0
Baseband version: 12.69a.60.29u_26.17.14.11_M
I have unlocked the bootloader using htcdev and have successfully rooted the the device but i'm still S-ON. I have tried installing some custom ROMs however after flashing the device did not boot. I understand that I have to flash the boot.img file located in the .zip file of the custome ROM. That I know how to do... My concern is that I want to try out some ROMs but as a precaution I would like to have the stock RUU file for the type device I have should I need to restore it.
I did create a backup of my ROM and have used it previously to restore the phone after installing the custom roms that haven't boot. I just want to know if I flash the boot.img file will a restore bring it back to where it was before the flash or do i need the RUU file to restore stock?
If the later please advice where I can find that particular file as I've searched but can't seem to find the one to use.
Thanks a million.
360fifa
Click to expand...
Click to collapse
RUU 3.20.502.52

Thank you kindly for taking the time to respond and also help.

Hi Gizmoe,
is there a rooted and s-off RUU file I could use as well?
Thanks again..

360fifa said:
Hi Gizmoe,
is there a rooted and s-off RUU file I could use as well?
Thanks again..
Click to expand...
Click to collapse
RUU 's can not be modified. You will not lose s off however by running an ruu. After you run ruu just pd98img a recovery and flash away.

Gizmoe said:
RUU 's can not be modified. You will not lose s off however by running an ruu. After you run ruu just pd98img a recovery and flash away.
Click to expand...
Click to collapse
So are you saying that I would need to unlock the bootloader again then following the same steps I have now? I had the impression based off could threads I've read that there's a way to root the device while gaining S-OFF that will allow me to avoid having to manually flash the boot.IMG everytime i install a custom rom. If there's a thread I can read or a guide to follow please provide a link so that I can proceed. Oh, does all the pd98img file the same?
Thanks again.
360fifa

360fifa said:
So are you saying that I would need to unlock the bootloader again then following the same steps I have now? I had the impression based off could threads I've read that there's a way to root the device while gaining S-OFF that will allow me to avoid having to manually flash the boot.IMG everytime i install a custom rom. If there's a thread I can read or a guide to follow please provide a link so that I can proceed. Oh, does all the pd98img file the same?
Thanks again.
360fifa
Click to expand...
Click to collapse
Yeah that's right. Your not s off. Well here is the only method left for the inspire. It may be a bit intimidating but really isn't that hard. Here is link.
http://tau.shadowchild.nl/attn1/?cat=6

Gizmoe said:
Yeah that's right. Your not s off. Well here is the only method left for the inspire. It may be a bit intimidating but really isn't that hard. Here is link.
Click to expand...
Click to collapse
Your're right very intimidating, however I'm willing to try my only concern is what is dd highlighted below "High Level Steps (some detail deliberately NOT included)
htc dev unlock, install cwm recovery and root ONLY
dd the stock boot image to /data/local/tmp and pull it to your pc HD (/dev/block/mmcblk0p22 is boot)
adb shell dd if=/dev/block/mmcblk0p22 of=/data/local/tmp/boot.img
adb pull /data/local/tmp/boot.img"?
Also i navigated to the folder on my device however it doesn't show any boot.img file. Just a init.rc file. Could you explain just this part of it please?
Thanks again,
360fifa

360fifa said:
Your're right very intimidating, however I'm willing to try my only concern is what is dd highlighted below "High Level Steps (some detail deliberately NOT included)
htc dev unlock, install cwm recovery and root ONLY
dd the stock boot image to /data/local/tmp and pull it to your pc HD (/dev/block/mmcblk0p22 is boot)
adb shell dd if=/dev/block/mmcblk0p22 of=/data/local/tmp/boot.img
adb pull /data/local/tmp/boot.img"?
Also i navigated to the folder on my device however it doesn't show any boot.img file. Just a init.rc file. Could you explain just this part of it please?
Thanks again,
360fifa
Click to expand...
Click to collapse
DD is copy and convert. It will copy boot files and convert it into boot.img. Use adb shell to do it as shell works within phone directories. Then pull it from pc using adb pull. He is giving you the exact adb commands to do both.
Code:
adb shell
dd if=/dev/block/mmcblk0p22 of=/data/local/tmp/boot.img
adb pull /data/local/tmp/boot.img

Gizmoe said:
DD is copy and convert. It will copy boot files and convert it into boot.img. Use adb shell to do it as shell works within phone directories. Then pull it from pc using adb pull. He is giving you the exact adb commands to do both.
Code:
adb shell
dd if=/dev/block/mmcblk0p22 of=/data/local/tmp/boot.img
adb pull /data/local/tmp/boot.img
Click to expand...
Click to collapse
Lol... I figured those were the commands to use, was just wondering what dd stand for.. ( copy and convert ). So let me see if i understand whats happening in the code.
So firstly I need to have the the HTC drivers installed and have the Android SDK on the root of c drive. Basically the same folder used when I unlocked to bootloader. In that folder I have the adb files, should I also add the files listed in the zip file he provided? If so let me explain the code, if no please shed some light.
So adb shell starts the emulator with the device
dd if=/dev/block/mmcblk0p22 of=/data/local/tmp/boot will copy and convert the mmcblk0p22 file if it is found in the /dev/block folder on the device and place it to the /data/local/tmp/ folder and call it boot.img
adb pull /data/local/tmp/boot.img I'm thinking that the computer is going to pull the boot.IMG file from the /data/local/tmp folder however where is it putting it? In the same folder that I started the command prompt from? That is the Android folder on my c drive?

360fifa said:
Lol... I figured those were the commands to use, was just wondering what dd stand for.. ( copy and convert ). So let me see if i understand whats happening in the code.
So firstly I need to have the the HTC drivers installed and have the Android SDK on the root of c drive. Basically the same folder used when I unlocked to bootloader. In that folder I have the adb files, should I also add the files listed in the zip file he provided? If so let me explain the code, if no please shed some light.
So adb shell starts the emulator with the device
dd if=/dev/block/mmcblk0p22 of=/data/local/tmp/boot will copy and convert the mmcblk0p22 file if it is found in the /dev/block folder on the device and place it to the /data/local/tmp/ folder and call it boot.img
adb pull /data/local/tmp/boot.img I'm thinking that the computer is going to pull the boot.IMG file from the /data/local/tmp folder however where is it putting it? In the same folder that I started the command prompt from? That is the Android folder on my c drive?
Click to expand...
Click to collapse
You will want to work out of the platform-tools directory.
Yes adb pull will always pull to your working directory unless another path is specified. Adb shell will need root. So if you type adb shell and don't see a # sign type su to get it. When done in adb shell you will need exit so you can pull to computer. If you had to take two steps to get a # prompt then you will type exit twice.

Gizmoe said:
You will want to work out of the platform-tools directory.
Yes adb pull will always pull to your working directory unless another path is specified. Adb shell will need root. So if you type adb shell and don't see a # sign type su to get it. When done in adb shell you will need exit so you can pull to computer. If you had to take two steps to get a # prompt then you will type exit twice.
Click to expand...
Click to collapse
Kool, thats the directory i'm referring to... I'm sure i'm already rooted. But your saying that when i send the command "adb shell" if I don't see the # sign then i should type su. Are you then saying that if I had to type su twice then I need to hit exit twice to pull to pc?
Oh before I forget should i run ruu before attempting this or remain as is? Also, do I need cmw recovery installed or can i remain on twrp 2.6.0.0?
Thanks again bro..
360fifa

360fifa said:
Kool, thats the directory i'm referring to... I'm sure i'm already rooted. But your saying that when i send the command "adb shell" if I don't see the # sign then i should type su. Are you then saying that if I had to type su twice then I need to hit exit twice to pull to pc?
Oh before I forget should i run ruu or remain as is?
Thanks again bro..
360fifa
Click to expand...
Click to collapse
Yes you would need to type su to see #. Adb shell root access works independently of phone root. It needs root access over adb which without an UN-secure boot img will need the su command. Exit for each level. Once for su and once for shell itself. You want to exit until you are back at Windows directory. Adb shell is at the phones root directory. The dd command is moving files within the phone, while Adb pull would be used to copy from phone to pc. I would not run that ruu if you are going to try and s off. I would run 2.47.502.7. Which I posted a link in the att stock Rom thread.
---------- Post added at 05:35 PM ---------- Previous post was at 05:33 PM ----------
http://forum.xda-developers.com/showthread.php?p=50027824

Gizmoe said:
Yes you would need to type su to see #. Adb shell root access works independently of phone root. It needs root access over adb which without an UN-secure boot img will need the su command. Exit for each level. Once for su and once for shell itself. You want to exit until you are back at Windows directory. Adb shell is at the phones root directory. The dd command is moving files within the phone, while Adb pull would be used to copy from phone to pc. I would not run that ruu if you are going to try and s off. I would run 2.47.502.7. Which I posted a link in the att stock Rom thread.
---------- Post added at 05:35 PM ---------- Previous post was at 05:33 PM ----------
http://forum.xda-developers.com/showthread.php?p=50027824
Click to expand...
Click to collapse
Do i need to run a ruu or can I proceed as is? If so u recommend running the 2.47.502.7 ruu before going thru the adb commands, y?
Thanks again..

360fifa said:
Do i need to run a ruu or can I proceed as is? If so u recommend running the 2.47.502.7 ruu before going thru the adb commands, y?
Thanks again..
Click to expand...
Click to collapse
Yes go ahead and proceed as is. You should not have any issues. If not successful then try ruu. You may not be able to run the older ruu if your bootloader is newer. Which in that case just run the newer one. I beleive I used this process on a phone with the newer software but the older works for sure.

Gizmoe said:
Yes go ahead and proceed as is. You should not have any issues. If not successful then try ruu. You may not be able to run the older ruu if your bootloader is newer. Which in that case just run the newer one. I beleive I used this process on a phone with the newer software but the older works for sure.
Click to expand...
Click to collapse
Gizmoe you have been very patient and very helpful i thank you a million times. If i encounter any other issues I'll definitely let you know.
Thanks again..
360fifa

360fifa said:
Gizmoe you have been very patient and very helpful i thank you a million times. If i encounter any other issues I'll definitely let you know.
Thanks again..
360fifa
Click to expand...
Click to collapse
I encountered an issue while trying to pull the boot.img file from /data/local/tmp/. The command used was adb pull /data/local/tmp/boot.img I then got a msg saying the adb is not a command, if I remove the adb and send the command with just pull it says pull is not a command.
If I exit su "#" it brings me to $ and if I send the command again it says that I don't have permission. Can you advise what I might be doing wrong? Oh, I got the mmcblk0p22 file to copy and convert into the boot.img file. I was able to see it using ES File explorer on my phone.
Do I need to go in fastboot usb, does unknown sources need to be checked?
Thanks again.

360fifa said:
I encountered an issue while trying to pull the boot.img file from /data/local/tmp/. The command used was adb pull /data/local/tmp/boot.img I then got a msg saying the adb is not a command, if I remove the adb and send the command with just pull it says pull is not a command.
If I exit su "#" it brings me to $ and if I send the command again it says that I don't have permission. Can you advise what I might be doing wrong? Oh, I got the mmcblk0p22 file to copy and convert into the boot.img file. I was able to see it using ES File explorer on my phone.
Do I need to go in fastboot usb, does unknown sources need to be checked?
Thanks again.
Click to expand...
Click to collapse
You need to exit one more time so you can see c prompt with your platform tools folder. Your still in shell therefore still in phone and not actually pulling to your pc. Only the pc uses Adb commands so you have to be at your platform tools folder. If you restart your phone temp empties too so if you can't see boot img anymore that's why.

Gizmoe said:
You need to exit one more time so you can see c prompt with your platform tools folder. Your still in shell therefore still in phone and not actually pulling to your pc. Only the pc uses Adb commands so you have to be at your platform tools folder. If you restart your phone temp empties too so if you can't see boot img anymore that's why.
Click to expand...
Click to collapse
Okay.. I am going to try that now, I swore I did that as well but lets see.

360fifa said:
Okay.. I am going to try that now, I swore I did that as well but lets see.
Click to expand...
Click to collapse
Here's what it said "failed to copy '/data/local/tmp/boot.img' to ' ./boot.img': Permission denied