Database Info

HowTo re-flash the recovery image after old 2.1 RUU

This guide was taken from AndroidCentral and I thought I would share it here because it's taken me 4 hours this morning to figure out why I was having so many problems trying to flash a recovery image when I know my phone was rooted and flashed in order to get 2.1 a month or so ago. I have been searching these forums and google and hope anyone else who has my issue finds this post.
1. Make sure you have the Android SDK installed.
2. Download flash_image.zip
3. Download recovery-RA-heroc-v1.5.2.img
4. Unzip the first file, and place both in your Android SDK/tools folder.
5. Make sure USB debugging is ON
6. Connect your phone to the PC
7. Open the command window and navigate to the Android-sdk/tools folder on your computer.
8. At the prompt enter the following, one line at a time followed by enter
Code:
adb shell
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
exit
exit
adb push flash_image /system/bin
adb push recovery-RA-heroc-v1.5.2.img /sdcard
adb shell
chmod 0755 /system/bin/flash_image
reboot
9. Your phone will reboot. When it is finished, back at your command window, once again enter
Code:
adb shell
su
cd /sdcard
flash_image recovery recovery-RA-heroc-v1.5.2.img
reboot recovery
10. With any luck, you'll have the recovery image back and can load custom 2.1 based ROMS again.
Hope this helps. All credit goes to gbhil at Android Central.

You might want to change the title of the post. People might get confused thinking you found a way to downgrade the hboot and not how to flash the recovery image.

Can't get it to work.
I ran the RUU earlier.
Tried to root the old way.......didn't work.
Just tried this to get the recovery image back.
At the SU command it says: permission denied
Thanks,
Bubba.

bubbacs1 said:
Can't get it to work.
I ran the RUU earlier.
Tried to root the old way.......didn't work.
Just tried this to get the recovery image back.
At the SU command it says: permission denied
Thanks,
Bubba.
Click to expand...
Click to collapse
This won't work for the leak that was put out today. You lost root. This process requires root.

bubbacs1 said:
Can't get it to work.
I ran the RUU earlier.
Tried to root the old way.......didn't work.
Just tried this to get the recovery image back.
At the SU command it says: permission denied
Thanks,
Bubba.
Click to expand...
Click to collapse
If you used the new RUU that was leaked today you're screwed. The older 2.1 leaks were test ROMs that were already rooted so you could use the instructions above to flash the RECOVERY. Notice recovery in bold, not bootloader. Once hboot is updated there is no known way to downgrade so you could use an older RUU file.

This rom has no root. There is NO WAY to re-root after flashing the newest RUU. I'm sorry to say... you're ****ed.

HeroMeng said:
This rom has no root. There is NO WAY to re-root after flashing the newest RUU. I'm sorry to say... you're ****ed.
Click to expand...
Click to collapse
So they can't run an older ruu with 1.5?

HeroMeng said:
This rom has no root. There is NO WAY to re-root after flashing the newest RUU. I'm sorry to say... you're ****ed.
Click to expand...
Click to collapse
To clear that up, if you run the RUU you have no root. If you extract the ROM, set it up, and flash it, you will preserve root, just like damageless made for all of us. But, yeah, you are not gonna be able to get back from this one. at least until someone figures it out.

I changed the thread title to hopefully alleviate some confusion. I didn't realize there was a newer RUU released.
I flashed the Damageless Rom and it's running smoothly so far, but I'm still trying to figure out why wifi tethering isn't working out for me. :-(

celemew2 said:
I changed the thread title to hopefully alleviate some confusion. I didn't realize there was a newer RUU released.
I flashed the Damageless Rom and it's running smoothly so far, but I'm still trying to figure out why wifi tethering isn't working out for me. :-(
Click to expand...
Click to collapse
Did you get wifi tether version 1_60? That's the only version that ever worked for me.

Yeah, I have 1.60 installed on my phone right now, but when I try to start tethering, a SU Request black screen comes up and nothing happens until I get an error, "Activity SU Request (in application Superuser Permissions) is not responding."
I'm sure there's an answer somewhere, but lately I haven't been having luck searching for it.
Edit:
Thank you 98classic! All I had to do was enable USB Debugging. (I had it turned off cause I didn't like the warning up top when my phone was plugged into the computer)

"flash_image not found" what the f**k

need the binary? physically check its there with a root explorer
Sent from my broken Typewriter!!!

or do this download and set up the android SDK it itself includes the flash_image binary. after that u will need to open a command prompt on your computer u will have to change directory to platform tools
cd /path/to/platform-tools
after that u will get the chance to do
flash_image recovery /path/to/recovery.img
that will flash the recovery
now reboot into recovery
Typed from my broken Typewriter!!!

[TUTORIAL] Updating to DI07, Obtaining Root, and Flashing Custom Recovery [FIX]

Scroll to the bottom for a fix to the newest clockwork recovery flasher...
UPDATING TO DI07
First things first, you must update to the latest firmware and kernel, but in order to do this you must un-root and return to the stock kernel in order to avoid problems.
Simply download the zip here, and run the run.bat inside, after extracting the folder to your desktop.
You must have debugging mode enabled for this to work.
Once that's finished you can update to DI07 using the stock recovery. You do this, like any other update, by renaming the zip (found here, to update.zip on throwing it onto the root of your sdcard.
Then, boot up into the stock recovery (power+camera+volume down) and press home to apply the update.zip.
The update will install and your phone will reboot into DI07.
First boot will take some time, so be patient.
Now onto the fun part, rooting your phone.
OBTAINING ROOT
Just as you obtained root before DI07, you obtain root on DI07, if you have the right tools. Download the one click root here, and once more extract the included folder to you desktop, make sure you have usb debugging enabled, and run the run.bat. Your phone will reboot, and you will have root.
FLASHING CUSTOM RECOVERY
Here is where it gets a tad bit more complicated. First off, you have to download the zip here, but this time before running the bat you have to open up command prompt and redirect it to your C:/android-sdk-windows/tools folder and then run the following code.
adb devices
adb shell
su
remount rw
exit
exit
Now the command prompt should close, and you can run the run.bat for build 31 of clockwork recovery flasher. Once more, your phone will reboot and after the script is done running and says "press any key to exit...." you can press enter and boot into recovery.
That's it, three simple steps to updating, obtaining root, and flashing clockwork recovery!
Also, don't forget to check out my ROM coming later today, as well as noobnl's Andromeda Galaxy ROM v1, just released.

great tutorial...and i can use these instructions even if i am using aridons v4 rom and heros overclocked kernel?

Well, it basically reverts you back to the stock kernal, so you will for sure lose the overclocked kernal. However, I'm not sure about the ROM. Your best bet would be either to hold off on this as the ROM you are suing isn't based on DI07, or flash to stock and then follow this guide. Your choice.

bubby323 said:
Well, it basically reverts you back to the stock kernal, so you will for sure lose the overclocked kernal. However, I'm not sure about the ROM. Your best bet would be either to hold off on this as the ROM you are suing isn't based on DI07, or flash to stock and then follow this guide. Your choice.
Click to expand...
Click to collapse
Well I just ran this and at first glance, it got me right into clockwork. I selected one of my nandroid and restored it. After the phone finished restoring and everything, I wanted to make sure that I still had clockwork but instead it was stock recovery once more.
Since I still had root, I redid the steps starting with entering the commands, then I re-ran the bat file for clockwork. I checked and clockwork is back...unknown as to how long though.

Thank you!!! the remount rw was what I needed to get the clockwork custom recovery to flash!!!
I have another question for you? Is it possible to install the custom recovery without having root? I suspect not? The reason I ask is that I would like to have a nandroid backup of the completely stock rom although I guess I could use the one noobnl has posted

well, i got back to a stock rom....applied the stock kernal...but when i went to apply the update.zip...it took me back to clockwork...not the stock recovery....so i tried to apply the update from there but it aborted...how do i get rid of clockwork so i can go into stock recovery and will that fix it?

mrkrabs said:
well, i got back to a stock rom....applied the stock kernal...but when i went to apply the update.zip...it took me back to clockwork...not the stock recovery....so i tried to apply the update from there but it aborted...how do i get rid of clockwork so i can go into stock recovery and will that fix it?
Click to expand...
Click to collapse
Three options I can think of- if you use adb reboot recovery I believe it will load the stock recovery- the other option is to use odin to go back to complete stock. Finally you could use the option for clockwork in this thread look for the link under "B]Update.zip (for clockwork recovery and includes all the listed apps below)"
EDIT: I can confirm that "adb reboot recovery" loads the stock recovery when you have clockwork

bubby323 said:
FLASHING CUSTOM RECOVERY
Here is where it gets a tad bit more complicated. First off, you have to download the zip --- but this time before running the bat you have to open up command prompt and redirect it to your C:/android-sdk-windows/tools folder and then run the following code.
adb devices
adb shell
su
remount rw
exit
exit
Now the command prompt should close, and you can run the run.bat for build 31 of clockwork recovery flasher. Once more, your phone will reboot and after the script is done running and says "press any key to exit...." you can press enter and boot into recovery.
Click to expand...
Click to collapse
Im having a little issue with this. Im running windows 7. Can I do this in windows 7? Also when it says redirect it to your C:/Android---- do I have to change the drive to ex. cd c:/ first or do i just type in the command prompt C:/android-sdk-windows/tools and hit enter and follow the rest of the commands? Sorry extreme noob here..
Thank you for any help!!

I have ClockworkMod Recovery installed, how can I get into the stock recovery to apply this?

Look 2 posts up
Sent from my SPH-D700 using XDA APP

You need to use the DG27 uninstaller instead of the DI07 uninstaller to update to DI07.
The DI07 uninstaller is just to go back to stock DI07 kernel if you already updated
DG27 uninstaller: http://www.sdx-downloads.com/devs/noobnl/one.click.stock.&.root.uninstallerv1.0.1.zip

I think it needs to be pointed out that this alone won't work if you are like me and have removed apps from the phone. All those apps must be restored in addition to reverting to stock kernel before the OTA update can be applied. At least that's how I understand it. Feel free to correct me if I'm wrong.

Thanks a lot, I appreciate step-by-step tutorials like this for noobs like myself ... this made things a lot easier since some of the stuff (files, instructions, etc.) was all over the place.

would seem that way because I removed the alarmclock to start and when i try to run update.zip from sd it fails when checking current system @ /system/app/AlarmClock.odex
i tried rerooting and reinstalling alarm clock using the backup from titanium. says it is successful but i do not find it in my apps drawer. it still fails there too..
WisdomWolf said:
I think it needs to be pointed out that this alone won't work if you are like me and have removed apps from the phone. All those apps must be restored in addition to reverting to stock kernel before the OTA update can be applied. At least that's how I understand it. Feel free to correct me if I'm wrong.
Click to expand...
Click to collapse

Titanium backup does not restore apps in /system. You have to restore those by hand.

Im officially struggling, undid the root then copy/paste the update to the sdcard, renamed it. It unzips but says its failed to open /sdcard/update.zip(no such file or directory)...suggestions?
I know that in the step it said to copy it to the root on the sd but im am very green to this stuff, and didnt see a folder marked that, therefore I just copied it to the sd card

I can't get Clockwork to flash now. I walked through the steps...I did the remount crap and ran the bat and it rebooted the phone but when i reboot into recovery it goes to the normal recovery screen. Now if I try to redo it it does not recognize the remount rw and i can't get anywhere with it and i'm stuck with no clockwork.

but this time before running the bat you have to open up command prompt and redirect it to your C:/android-sdk-windows/tools folder and then run the following code.
adb devices
adb shell
su
remount rw
exit
exit
Click to expand...
Click to collapse
This part is unnecessary because the recovery zip comes with adb built in

is there a manual way to push this to the phone? These one clicks never seem to work for me ever it's just easier to do it myself.

Whosdaman said:
This part is unnecessary because the recovery zip comes with adb built in
Click to expand...
Click to collapse
No you must do this in order to get clockwork.

Clockwork Recovery for Coby Kyros MID-7015--Updated

All credit for this goes to Razor950
Coby Kyros MID-7015
Download recovery.img from Sendspace.com - send big files the easy way
use flash_image and flash recovery to tablet. (ex flash_image recovery /sdcard/recovery.img)
Navigating:
Home is down
Menu is select
Back is back
Everything works and I'll post stock nandroid dumps on here soon.
Update some are reporting that they are unable to Flash to the recent firmware update that was posted
on the coby website do to the clockworkmod being installed.
Thanks to Kasten for coding this then thanks to adamdietrick for creating a new zip
That can be flashed with the clockworkmod installed.
Clockworkmod Coby Firmware update
Donate if you like Razor950's work!

thanks for posting
any issues that anyone gets with this recovery, please pm me.
enjoy

havic said:
Everything works and I'll post stock nandroid dumps on here soon.
Donate if you like Razor950's work!
Click to expand...
Click to collapse
Here's my backup
http://www.megaupload.com/?d=5ALHYN80

You must be rooted (I assume z4root or universal android root works)
then either using terminal (grab terminal app from market) or using adb.
Grab the recovery.img and drop it into sdcard via usb or adb push.
Open terminal and type su and then flash_image recovery /sdcard/recovery.img
or if using adb, its adb shell and then su and then flash_image recovery /sdcard/recovery.img
Note: I am not the best at writing noobie guides but hopefully it helps

Thanks for this. I do not have mine yet( lol, just ordered it) but I donated for your work!
Thanks!

Anyone have a idea on how to get back into recovery? I have it installed but have tried holding every button to get me back and nothing kinda sucks since I have been testing new mods for this and cant get to my backup because the first shot at the mod was a fail.

I was able to get clockwork installed thanks to you. Do you know of any images that are out for the 7015?

Lawful123 said:
I was able to get clockwork installed thanks to you. Do you know of any images that are out for the 7015?
Click to expand...
Click to collapse
Aside from stock(rooted) dump, there is nothing, I'll work with havic to get a rooted dump with google apps(market mostly) working correctly.
Besides that there is nothing else from my end for now. I personally don't like telechip tablets, bad experience from a gentouch :X
Also telechip company are retards and don't release kernel source, it'd help developers optimize a 2.1 rom and also be able to port kernel to a newer one for 2.2

I can see that this model gained popularity this black Friday. We are just now starting to see android tablets hit " Joe User ". I think that the telechip tabs will become popular so long as the price is on point. Thanks for all you do.

what exactly is this recovery for?
does installing this offer me additional features, or is it merely what we would restore to in case of disaster?

Deenybird said:
what exactly is this recovery for?
does installing this offer me additional features, or is it merely what we would restore to in case of disaster?
Click to expand...
Click to collapse
For now it is a good way to backup your unit so that if you screw it up you can go back. In the future people will make images for it. Hopefully someday android 2.2

Which version of flash_image tool is needed to flash this recovery or is the tool stock on the tablet?
EDIT: figured it out. stock. Looking through the dump now =)

adamdietrick said:
Here's my backup
http://www.megaupload.com/?d=5ALHYN80
Click to expand...
Click to collapse
If you try and recover from the backup that is in the link you may or may not get a error.The error is md5 mismatch. So the recovery fails to install.
What needs to be done is need to have busybox installed then shell in and run the following commands.
This has to be ran from the dir. that contains the backup files.
Which will more than likely be similar to this
/sdcard/clockworkmod/backup/2010-12-01.20.41.18
#busybox md5sum -c nandroid.md5
boot.img: OK
cache.img: OK
data.img: OK
recovery.img: OK
system.img: OK
# reboot recovery
reboot recovery
Once in clockwork then run a recovery.
If you have a Issue let me know I will try my best to get you some answers.

razor950 said:
You must be rooted (I assume z4root or universal android root works)
then either using terminal (grab terminal app from market) or using adb.
Grab the recovery.img and drop it into sdcard via usb or adb push.
Open terminal and type su and then flash_image recovery /sdcard/recovery.img
or if using adb, its adb shell and then su and then flash_image recovery /sdcard/recovery.img
Note: I am not the best at writing noobie guides but hopefully it helps
Click to expand...
Click to collapse
When I type this it it says its file not found.
I double checked and in astro I see
sdcard/recovery.img
any ideas?

beccaannabell said:
When I type this it it says its file not found.
I double checked and in astro I see
sdcard/recovery.img
any ideas?
Click to expand...
Click to collapse
where are you when you type that? does it not find the flash_image binary or the .img?

Worked for me
I got it working by doing the following.
1. Download and installed "Android Terminal Emulator" on to the device.
2. Download and installed Z4Root 1.3.0.apk from here http://forum.xda-developers.com/showthread.php?t=833953
3. Run it and pressed the "Permanent Root" button. It took a bit and it auto rebooted.
4. Place the recovery.img on the root of my sd card. (Razor950's recovery.img is from post#1 on this thread.)
5. Opened "Android Terminal Emulator".
6. Entered the following.
su
flash_image recovery /sdcard/recovery.img
7. Locked everything up for about 5 min and it went back to # prompt when it was done.
8. I powered off the device.
9. After it turned off I pressed and held the back button then pressed the power button. Kept holding it until you see clockworkMod v2.5.1.3. (If it says Android it's too late.)
I have a question myself what is sd-ext on clockwork? Also is there a way to do a selective backup? Just system with no data?
Thanks.

Thanks for your procedure, will try it when I receive my tablet.
Regarding your question about sd-ext, it's a partition of your sdcard. One will be in fat32 and the other in ext2 or ext3. Usually ext2 is used when you have app2sd or 12sd+. The purpose of this is to have more apps in install by installing them on your ext partition instead of internal memory. I use it for my HTC desire (smartphone)
Regarding your second question, I don't know anyway of doing a backup without data but pretty sure it's possible, for example, if you go in your Android do a factory reset. reboot in recovery then do your backup. Not sure if there's another way to do it

Yezir!
Kasten said:
I got it working by downing the following.
1. Download and installed "Android Terminal Emulator" on to the device.
2. Download and installed Z4Root 1.3.0.apk from here http://forum.xda-developers.com/showthread.php?t=833953
3. Ran it and pressed the "permit root" button. It look a bit and it auto rebooted.
4. Place the recovery.img on the root of my sd card.
5. Opened "Android Terminal Emulator.
6. Entered the following.
su
flash_image recovery /sdcard/recovery.img
7. Locked everything up for about 5 min and went back to # prompt when done.
8. Powered off device.
9. Press and held the back button then pressed the power button. Kept holding it until I saw clockworkMod v2.5.1.3. (If it says Android its too late)
I have a question myself what is sd-ext on clockwork? Also is there a way to do a selective backup? Just system with no data?
Thanks.
Click to expand...
Click to collapse
this is perfect!!!!! thanks for thinking of us dummies

Daali said:
where are you when you type that? does it not find the flash_image binary or the .img?
Click to expand...
Click to collapse
same thing for me
"error opening /sdcard/recovery.img:No such file or directory"
Help

noonerealy said:
same thing for me
"error opening /sdcard/recovery.img:No such file or directory"
Help
Click to expand...
Click to collapse
Can you see the recovery.img on your sd card from a file manger app like Astro? If so when your in the terminal can you cd to /sdcard? If so can you enter ls -l recovery.img? Check the size to make sure it is all there.
I have anther question myself.
At cobyusa.com/?p=prod&prod_num_id=10498&pcat_id=1013 there is a firmware update. in the update.zip in system in the build.prop file i see a line that says "ro.build.version.incremental=eng.enzo.20101125.200217". I notice that the build number on the device says "MID7015 1.6a_20101105-2". Looks like they may have changed somethings but not sure what. What would be bet best way to figure out what they changed?
I tried to run it from clockwork and i get
assert failed: getprop("ro.product.device") == "tcc8900" || getprop("ro.build.product") == "tcc8900"
E:Error in /sdcard/update.zip
(Status 7)
Installation aborted.
To install this update would I just have to unroot my device? Not sure how to look what the current ro.build.product is now.
Thanks.

Recovery Problem.

I have problem with CWM v5.8.3.4, while i flash, restore, back, everything it still back to recovery mode, can`t do nothing.

CWM v5.8.3.4 -- Here is your problem, you used ROM manager to update recovery. There are red flags on this pretty much everywhere Dx
You've gotten into the bootloop, see my PERI tool (Link in sig) and try and run the bootloop-fix there, if you can get adb working. You can also try it manually (Again, adb permitting) in roach2010's recovery touch thread, he provides the fix there.
If you can't get adb working at all, you need to NvFlash back to stock, wheelie thread is again in my signature.
Good luck.
--
By the way, you can get back into Android by Cold-booting the system. Hold volume-down, then press power and keep holding volume-down till it boots. Don't press volume-up or anything else, that'll put you back into recovery.

I was tryin` but while i want to flash someting apx turning off and can`t do nothing :/ Erm, how to fix can`t use my tablet about 1 month

Hi,
have you tried coldbooting ?
Hold power and volume down. Should get you out of recovery.

Yes, i do mate, and can`t do nothing. It dont see sd card and tablet memory :/

Okay I have the same problem, i used the cursed Rom Manager and now im stuck in the endless boot cycle, I can cold boot and I have tried to flash roachs cwm but nothing. Ive read where roach gives a code that might fix it, but i have no ideal what to do with that code or how to use it, and i see where thing o doom said the fix is in his signature but im not having much luck with that either. If you could maybe explain to me how im supposed to use roaches code or post the link that explains it here, I would sure appreciate it. Thank you.
Sent from my Transformer TF101 using XDA Premium HD app

Any ideas please? :/

Start an adb shell session with your computer connected, or in a terminal app on your tf, then run roaches fix (type it in) to the terminal app/adb shell session.

"then run roaches fix" u mean write app/adb shell session ?
And now i got another problem:
"E: Can`t mount /sdcard/
Biggest problem for now, i can`t turn on debuging :/

okay I opened terminal emulator on my tablet and typed in roaches fix exactly like it says
adb shell dd if=/dev/block/mmcblk0p3
and this popped up
*daemon not running. starting it now on port 5038*
*daemon started successfully*
error: device not found
255 [email protected]:/ $
what am i doing wrong? thank you so much for your continued help
Ive also tryed the peri and easy recovery with no luck, I think my bigest problem is i dont understand the adb thing, ive tryed searching about it and im lost.

That's the wrong dd command, dd consists of an if=/ then an of=/
Try this.
adb kill-server
adb start-server
adb devices
(you should see the tf, if not, bad drivers/not working connection, fix that first)
adb shell
su (Grant superuser permissions, if you can, and you'll see a # sign)
dd if=/dev/zero of=/dev/block/mmcblk0p3
reboot
Then flash a new recovery by:
Download and extract recoveryblob from recovery.zip
adb kill-server
adb start-server
adb devices
adb push C:\path\to\recoveryblob /sdcard/
adb shell
su (you'll get # sign again)
dd if=/sdcard/recoveryblob of=/dev/block/mmcblk0p4
reboot

I have to thank you for your patience and continued help with my problem, but with that being said I must inform you that I am still completely lost. Im not a developer and I would not even consider myself remotely knowledgeable in the subject. I was just wanting a nice custom ROM and I had found one with cyanogen mod 9 but I messed up by using the Rom manager and now I'm screwed.
I can cold boot into my tablet, and on my tablet I have this computer emulator program, which i can type in the codes you mentioned, but I'm pretty sure that is not correct. what i need is a program like that on my computer, so far I found this link regarding adb, but I'm not sure if it is right direction.....
http://theunlockr.com/2009/10/06/how-to-set-up-adb-usb-drivers-for-android-devices/
if this is the wrong direction, can you please point me in the right direction? again I am sorry for my ignorance and when this is all done I will be sure to buy you a freaking case of beer. Thank you

You can run the adb commands on your TF using the emulator app, but you'll need to directly download the recoveryblob used to flash.
Open terminal and run roach's fix (except instead of typing adb shell, you just start from su, then run the dd command from there, since you're already in the tf's 'shell')
so
su
dd if of etc
reboot
Then you'll need to reflash a recovery, so download Team Rouge's Recovery.zip then use ES file explorer app (download that) to extract the file called 'recoveryblob'. Take that file called 'recoveryblob' then copy it out of the downloads folder (still using ES file explorer) hit the favorites button then hit /sdcard/ (You don't need a microSD card to do this, /sdcard/ [For whatever reason ..] is the Internal storage. [/removable/microSD/ is the external]) then paste the recoveryblob right in /sdcard/.
Open up the terminal emulator and run
su
dd if=/sdcard/recoveryblob/ of=/dev/block/mmcblk0p4
reboot
That should give you recovery! (Then you can reflash a ROM or do whatever you need/Enjoy not having to cold-boot everytime)
Sent from my Tf101atron9000 using XDA Premium HD

Im stuck w8ing for You at Skype: )

Thanks for your info. TF now up and running without the need to cold boot. For information, I did not use a Rom Manager to flash the rom, I used CWM to flash the Gummy Rom.

I finally got my tf101 fixed and I learned something new. I just wanted to thank Thing of Doom for all of the help he offered me and without ever asking anything in return. Thanks.....

If anyone wants to know, here's what I did to fix nefem's completely FOUBAR TF101g.
First I tried NvFlash, then right at the flashing stage realized it's a tf101g Sbkv3, so that was out X.x
Then I uninstalled all the drivers and reinstalled them with PERI, got ADB working through recovery.
I had him try and flash a .zip file for a new recovery so I could run Roach's fix, but for whatever reason the CWM wouldn't mount the Internal storage (mmcblk0p7 or /sdcard/) so I manually pushed the recoveryblob to /sdcard/ and it seemed to work, but when I ran dd if=/sdcard/recoveryblob of=/dev/block/mmcblk0p4 it couldn't mount and find it.
The next thing I tried since internal was acting funky was looking at the log, I noticed that the directory was /system/sbin so I just pushed the recovery to there, adb push recoveryblob /system/sbin, then ran the same dd command with that directory and it worked. Then I just ran roach's fix normally and rebooted, he had rouge recovery!
That was the first part, his internal was still borked for some reason and Rouge couldn't mount it.
I tried various ADB mounts and they all failed, so eventually he put a MicroSD into his phone (or something else) I placed the ARHD superswipe script and a ROM w/ Guevor's kernel on there, then since rouge reads external, superwipe was able to completely format internal storage. From there it was an easy wipe and flash. Once we got a working ROM on there, we noticed that it was still getting stuck at the Eee pad logo (He could cold-boot). So I figured that his bootloader was still messed up, so we took the latest Tf101G stock blob, used the handy Rayman's blob tools to pull out the EBT (bootloader partition) blob, then directly flashed that with dd again through adb: dd if=/sdcard/blob (Removed the EBT extension, important) of=/dev/block/mmcblk0p4
Reboot, and finally it was booting optimally!
It was a tad of trial and error (The internal storage thing really had me confuzzled) but it all got fixed up in the end.
Hope this helps someone somewhere

Thing O Doom said:
If anyone wants to know, here's what I did to fix nefem's completely FOUBAR TF101g.
First I tried NvFlash, then right at the flashing stage realized it's a tf101g Sbkv3, so that was out X.x
Then I uninstalled all the drivers and reinstalled them with PERI, got ADB working through recovery.
I had him try and flash a .zip file for a new recovery so I could run Roach's fix, but for whatever reason the CWM wouldn't mount the Internal storage (mmcblk0p7 or /sdcard/) so I manually pushed the recoveryblob to /sdcard/ and it seemed to work, but when I ran dd if=/sdcard/recoveryblob of=/dev/block/mmcblk0p4 it couldn't mount and find it.
The next thing I tried since internal was acting funky was looking at the log, I noticed that the directory was /system/sbin so I just pushed the recovery to there, adb push recoveryblob /system/sbin, then ran the same dd command with that directory and it worked. Then I just ran roach's fix normally and rebooted, he had rouge recovery!
That was the first part, his internal was still borked for some reason and Rouge couldn't mount it.
I tried various ADB mounts and they all failed, so eventually he put a MicroSD into his phone (or something else) I placed the ARHD superswipe script and a ROM w/ Guevor's kernel on there, then since rouge reads external, superwipe was able to completely format internal storage. From there it was an easy wipe and flash. Once we got a working ROM on there, we noticed that it was still getting stuck at the Eee pad logo (He could cold-boot). So I figured that his bootloader was still messed up, so we took the latest Tf101G stock blob, used the handy Rayman's blob tools to pull out the EBT (bootloader partition) blob, then directly flashed that with dd again through adb: dd if=/sdcard/blob (Removed the EBT extension, important) of=/dev/block/mmcblk0p4
Reboot, and finally it was booting optimally!
It was a tad of trial and error (The internal storage thing really had me confuzzled) but it all got fixed up in the end.
Hope this helps someone somewhere
Click to expand...
Click to collapse
I am having the same exact problem as him with the same amount of programming expertise....I was woundering if you could walk me through it personally as what you've typed above seems like it's in a different language. Thanks very much in advance.

datfinedude said:
I am having the same exact problem as him with the same amount of programming expertise....I was woundering if you could walk me through it personally as what you've typed above seems like it's in a different language. Thanks very much in advance.
Click to expand...
Click to collapse
Sure if you'd like.

My Skype name is Datfinedude
Sent from my Triumph using xda premium

[Q] ClockworkModRecovery (Only wants to wipe data) [SOLVED - Read / Scroll Down]

Ok, so i have a fresh new stock of 21e flashed onto my phone. Rooted with no errors, and I have Clockwork ROM Manager installed.
If I use the app to boot into recovery my phone just automatically Wipes all data then loads back up as if a fresh install was done, so I thought I would check the problem out myself (Power and vol.down), and the only options I have in the Clockwork Boot Menu are as follows:
Android system recovery <3e>
Confirm wipe of all user data?
THIS CAN NOT BE UNDONE.
No
No
No
No
No
No
No
Yes -- delete all user data
No
No
No
Click to expand...
Click to collapse
If I go back one page the only options I have are as follows:
Android system recovery <3e>
Android system recovery utility
reboot system now
wipe data/factory reset
wipe cache partition
wipe cache partition and package recovery
wipe nv dynamic partition
Click to expand...
Click to collapse
I can not go back any further, they are my only options in boot recovery of which I find extremely odd. (Until this is sorted I can not install a new ROM/Kernel and fix my network)
Any help would be much appreciated.
Kind Regards.

Loopy Frog said:
Ok, so i have a fresh new stock of 21e flashed onto my phone. Rooted with no errors, and I have Clockwork ROM Manager installed.
If I use the app to boot into recovery my phone just automatically Wipes all data then loads back up as if a fresh install was done, so I thought I would check the problem out myself, and the only options I have in the Clockwork Boot Menu are as follows:
If I go back one page the only options I have are as follows:
I can not go back any further, they are my only options in boot recovery of which I find extremely odd. (Until this is sorted I can not install a new ROM/Kernel and fix my network)
Any help would be much appreciated.
Kind Regards.
Click to expand...
Click to collapse
That's not ClockworkMod.
That's the stock Android recovery.

ah lol (embarrassing)
Thanks though... ok so it seems that my problem is that the copious amount of things that I try to install clockwork boot, it just wont happen. Any ideas?
Regards

Loopy Frog said:
ah lol (embarrassing)
Thanks though... ok so it seems that my problem is that the copious amount of things that I try to install clockwork boot, it just wont happen. Any ideas?
I am just about to see if I can do something with the LGDP2 V36 UMTS.
Regards
Click to expand...
Click to collapse
You can flash ClockworkMod Recovery with this.
[GUIDES/TOOLS]Making Developing/Flashing/Returning to Stock Easier
The Dark Lestat said:
1. Recovery Manager
This is a flashing tool that will let you install:
Stock Recovery
ClockworkMod Recovery
Touch ClockworkMod Recovery
Requirement:
You'll need to have the LG Thrill / Optimus 3D
You'll need to be rooted.
Superuser and SU have to be updated to the latest app and binary
Update Superuser in the market
Open Superuser app and go to the options
Scroll to the bottom and click "Su binary"
DOWNLOAD LINK: Recovery Manager - 18 MB
How To Use:
Extract the files with WinRar or 7zip
Launch "Recovery Manager.bat"
Make sure your phone is in "USB Debugging Mode" and is plugged in
Choose your option
Wait for the screen to refresh
Boot into recovery to verify it was flashed successfully
Click to expand...
Click to collapse

No Luck :-(
Did your guide word for word, all went successfully.
However.... I can use root applications on the device etc...
Though it appears I can no longer get the clockwork boot anymore?

Loopy Frog said:
No Luck :-(
Did your guide word for word, all went successfully.
However.... I can use root applications on the device etc...
Though it appears I can no longer get the clockwork boot anymore?
Click to expand...
Click to collapse
Try: 3d+volume down+power button
hold til 3 sec after seeing the logo.

Loopy Frog said:
No Luck :-(
Did your guide word for word, all went successfully.
However.... I can use root applications on the device etc...
Though it appears I can no longer get the clockwork boot anymore?
Click to expand...
Click to collapse
You can also use the ROM Manager app to boot into recovery.

p-vlad said:
Try: 3d+volume down+power button
hold til 3 sec after seeing the logo.
Click to expand...
Click to collapse
Nope doesn't work. >_<
The Dark Lestat said:
You can also use the ROM Manager app to boot into recovery.
Click to expand...
Click to collapse
Yeah that's what I was using when it used to work, however now when I do it, It just "deletes all user data". Obviously because it is not having any response from the Clockwork recovery boot, and goes straight into:
Android system recovery <3e>
Confirm wipe of all user data?
THIS CAN NOT BE UNDONE.
No
No
No
No
No
No
No
Yes -- delete all user data
No
No
No
Click to expand...
Click to collapse
I just don't understand why My boot wont change from android to the clockwork boot. >_<

Is it being flashed properly?
Try doing the flashing manually. Download the recovery image from www.clockworkmod.com/rommanager (choose touch for P920, nothing else), then open adb in cmd and type the following commands with phone plugged in:
adb push <image name>.img /data/local/tmp
adb shell su -c "dd if=/data/local/tmp/<image name>.img of=/dev/block/mmcblk0p6 bs=4096"
adb shell "rm /data/local/tmp/<image name>.img"
Replace <image name> with the filename of the img. If everything checks out, you should be able to boot into CWM. If you get errors, post them here
(I took the commands from The Dark Lestat's batch file, props go to him. I was too lazy to search for it Don't judge me, it's 12.30am here)

pandaball said:
Try doing the flashing manually. Download the recovery image from www.clockworkmod.com/rommanager (choose touch for P920, nothing else), then open adb in cmd and type the following commands with phone plugged in:
adb push <image name>.img /data/local/tmp
adb shell su -c "dd if=/data/local/tmp/<image name>.img of=/dev/block/mmcblk0p6 bs=4096"
adb shell "rm /data/local/tmp/<image name>.img"
Replace <image name> with the filename of the img. If everything checks out, you should be able to boot into CWM. If you get errors, post them here
Click to expand...
Click to collapse
Thanks Panda, I'll give it ago later when I have time, and let ya know how I go.

Loopy Frog said:
Thanks Panda, I'll give it ago later when I have time, and let ya know how I go.
Click to expand...
Click to collapse
Also, I'll update the scripts with a newer version, so that it's simplified.

Holy Sh*t .. .
dont use Rom Manager to boot into recovery.. there where so many bad reports about that app.. if you want to boot into recovery.. do this.. .
install Terminal Emulator..
type in ..
su (enter)
reboot recovery (enter)
your phone will boot into what recovery you have .. .
hope that helps!

JastaPein said:
Holy Sh*t .. .
dont use Rom Manager to boot into recovery.. there where so many bad reports about that app.. if you want to boot into recovery.. do this.. .
install Terminal Emulator..
type in ..
su (enter)
reboot recovery (enter)
your phone will boot into what recovery you have .. .
hope that helps!
Click to expand...
Click to collapse
It's not using ROM Manager to BOOT into recovery.
It's using ROM Manager to install ClockworkMod that was the issue.

Very weird indeed. I also have flashed yhe 21E rom from LG. Next I rooted the phone and installed CWM touch. I have no problems with it.

JastaPein said:
Holy Sh*t .. .
dont use Rom Manager to boot into recovery.. there where so many bad reports about that app.. if you want to boot into recovery.. do this.. .
install Terminal Emulator..
type in ..
su (enter)
reboot recovery (enter)
your phone will boot into what recovery you have .. .
hope that helps!
Click to expand...
Click to collapse
Thanks, either/or this doesn't matter at this stage, I need to able to boot into recover for this or even clockwork to do it anyway. I'll keep this in mind nonetheless.
pandaball said:
Is it being flashed properly?
Try doing the flashing manually. Download the recovery image from www.clockworkmod.com/rommanager (choose touch for P920, nothing else), then open adb in cmd and type the following commands with phone plugged in:
adb push <image name>.img /data/local/tmp
adb shell su -c "dd if=/data/local/tmp/<image name>.img of=/dev/block/mmcblk0p6 bs=4096"
adb shell "rm /data/local/tmp/<image name>.img"
Replace <image name> with the filename of the img. If everything checks out, you should be able to boot into CWM. If you get errors, post them here
(I took the commands from The Dark Lestat's batch file, props go to him. I was too lazy to search for it Don't judge me, it's 12.30am here)
Click to expand...
Click to collapse
All went well, expect for the last string, see below;
I renamed "recovery-clockwork-touch-5.8.1.5-p920" - "x"
C:\Users\Astro\ADB>adb push x.img /data/local/tmp
3204 KB/s (5995063 bytes in 1.827s)
C:\Users\Astro\ADB>adb shell su -c "dd if=/data/local/tmp/x.img of=/dev/block/mmcblk0p6 bs=4096"
1463+1 records in
1463+1 records out
5995063 bytes transferred in 0.992 secs (6043410 bytes/sec)
C:\Users\Astro\ADB>adb shell "rm/data/local/tmp/x.img"
rm failed for /data/local/tmp/x.img, No such file or directory
Click to expand...
Click to collapse

Loopy Frog said:
All went well, expect for the last string, see below;
I renamed "recovery-clockwork-touch-5.8.1.5-p920" - "x"
Click to expand...
Click to collapse
I'm about to upload a newer version of it. Let me know if it works.

Alright.
Here's the new Recovery Manager with updated scripts. It should be a lot cleaner now.
Recovery Manager

The Dark Lestat said:
Alright.
Here's the new Recovery Manager with updated scripts. It should be a lot cleaner now.
Recovery Manager
Click to expand...
Click to collapse
You my friend, are truly amazing!! what ever your alterations were; it worked!
Thank you.

Loopy Frog said:
You my friend, are truly amazing!! what ever your alterations were; it worked!
Thank you.
Click to expand...
Click to collapse
I think it's because my scripts were thrown together in the previous one.
Anyways, it's cleaned up.
Glad it worked!