Related
Update - 2/21/2011
If you have bricked an HTC EVO this will likely NOT work for you and this is the wrong info to be reading. I have gotten a few emails from this link about EVO 110 errors.
12/26/2010 - This thread is super old now:
If you ran the 1.56 RUU and your phone no longer turns on visit htc.com, go to support, choose Hero (Sprint) and download the 2.1 system update.
Remove battery from your phone and start it up again, then run the exe file that you just downloaded -
http://member.america.htc.com/downlo...2.27.651.6.exe
------All the info below is kept for reference -------
(As of 3/31/2010 - I am 10 for 10 for getting these back and working!! 3/3 of going back to 100% stock)
Edit: I have no longer kept track... its been over a month and I know personally I've done about 15 more of these... with about half being return to stock.
If you need to contact me, PLEASE EMAIL instead of using private messages, it'll probably turn into a google talk chat anyways, so add me on there, [email protected] (Its just easier than having to log in here and reply to private messages, since I get emails on the go as well.)
So you just ran the 1.56 RUU and got a 110 error. Now your screen turns on and stays black and if you plug the phone into USB you see the HTC logo. Unplug it and see the RUU menu.
Like you, I decided to attempt to roll back using the RUU 1.56. I was hit with the 110 error, and nothing but fastboot would work, I was able to launch ./fastboot-mac oem boot to get into the system.
I tried ./fastboot-mac boot image/bootname.img and a billion other things like everyone else who is having the issue, but just like them I had no success. In the second post below are the steps to resolve this issue. This will either take you to your first Nandroid backup or to whatever ROM you choose to flash once you get recovery back. I have not found a way to get back to 100% stock, but at least your phone wont be a brick.
EDIT:As of 3/30/2010 @ 8:30 PM I was able to get my phone completely 100% to stock. I was able to do this by retrieving a Nandroid restore from someone who used flashrec to make their initial backup. This restore does not touch the recovery image but I was able to boot into my recovery then write the HTC recovery back on top of it. I now have 100% un-rooted phone. See Post number 2 for the right way to do this.?
I've helped a few people over log me in now.
I'm willing to continue doing this but it is cutting into my family time, I will do this for a "respectable" amount of money.
Feel like I've helped you??
Buy me some coffee!
(Zip attached includes fix and stock folders. Use the fix folder FIRST to get completely booted. You can use the stock folder if you want to get 100% stock after you have a running unrooted system but have RA recovery.)
Steps to resolve:
(You SHOULD have a Nandroid backup of some sort, if not download a ROM... Fresh1.1??)
1) Boot the phone to black screen
2) Plug phone into PC/MAC - The HTC logo should appear at this point
---- If you've been doing anything else, rerun the RUU and let it fail and reboot to the HTC logo.
3) PC - fastboot oem boot | MAC - ./fastboot oem boot
(Make sure you turn on USB Debugging under Settings --> Applications --> Developer)
4) Root your phone using asroot2
Code:
adb push asroot2 /data/local/
adb shell chmod 0755 /data/local/asroot2
adb shell
/data/local/asroot2 /system/bin/sh
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cd /system/bin
cat sh > su
chmod 4775 su
5) This is where your Nandroid backup comes into play.
(Browse to your nandroid folder, find your first backup and copy all of the .img files except system and cache to your SD card root directory)
NOTE: At this point you should dismount the SD card if you mounted inside of Android OS(Sense/Launcher)
6) run adb shell (PC - adb shell | Mac - ./adb shell)
7) type su
8) Run the following commands (if you get out of memory errors, type su again and try once more)
NOTE: Do not copy the "#"'s in the commands, the # just means you are running as SU, as opposed to the "$"
Code:
# flash_image recovery /sdcard/recovery.img
# flash_image boot /sdcard/boot.img
# flash_image misc /sdcard/misc.img
9) now... type reboot recovery
This time you should get your recovery menu, should have been RA or whatever you used... from there I did a complete nandroid restore and my system booted.
Also, after I did this I did try to let it boot without doing a recovery and it wouldnt go anywhere... but I'm fairly impatient... it may have wanted to load. I figured it best to do an entire Nandroid restore though.
-------------------------------------------------------------
100% Stock Configuration Work Around
-------------------------------------------------------------
Non-Rooted Nandroid Backup:
nandroid.7z
I was able to get my phone completely 100% to stock. I was able to do this by retrieving a Nandroid restore from someone who used flashrec to make their initial backup. This restore does not touch the recovery image but I was able to boot into my recovery then write the HTC recovery back on top of it. I now have 100% un-rooted phone. I'm not sure how to go about posting a 127MB file, what do you think it the best place?
After restoring the Nandroid backup I tried this:
Code:
Dustan-Bonneys-MacBook:tools dustanbonney$ ./adb shell
$ su
su: permission denied
Then I rebooted to recovery (I used RA 1.5.2)
Code:
Dustan-Bonneys-MacBook:tools dustanbonney$ ./adb remount
remount succeeded
Dustan-Bonneys-MacBook:tools dustanbonney$ ./adb shell
/ # mount -a
mount: mounting /dev/block/mmcblk0p2 on /system/sd failed: No such file or directory
/ # cd /sdcard
/sdcard # flash_image recovery /sdcard/Stock/recovery.img
flashing recovery from /sdcard/Stock/recovery.img
/sdcard # reboot recovery
I was booted to the Triangle and exclamation mark... I pulled the battery and booted up normally.
Stock Kernel - 2.6.27-533ce29d [email protected] )
Stock Build - 1.56.651.2 CL85027 release-keys
Other things that should be mentioned:
If you used RA 1.6.2 - I was unable to get my boot.img or the stock boot.img from the RUU's rom.zip to flash back to the recovery partition. I had to use the RA 1.6.2.img and "flash_image recovery /sdcard/recoverynamegoeshere.img"
It seems that if you've flashed the radio update, the RUU does not write the radio back successfully. Others have had issues going back to the stock radio using the upgrade.zip option as well.
I attempted to use the boot.img, recovery.img, from the RUU's rom.zip with no success. I might try it again. I was able to get to stock recovery (Triangle and exclamation) and to the Hboot menu... but from hboot I had to run the RUU and rebrick the device cause I couldnt get anything at that point, even fastboot oem boot wouldnt load.
There have been times when I get weird issues writing the flash recovery, boot, or misc and when you reboot and load "fastboot oem boot" it wont look like it goes anywhere.... check "adb devices" and your device should be listed. From there do an "adb remount" and then "adb shell" and reflash once more and then "reboot recovery".
If all else fails, I'm available for a small fee.
[email protected]
Anxiously waiting your news. Just encountered this problem today.
Updated ...
imekul said:
Anxiously waiting your news. Just encountered this problem today.
Click to expand...
Click to collapse
Wow! If you've fixed this, I think you're everyone's hero now. We won't have to worry about using the RUU now
I was going to try something similar to this today, but i was unable to brick my phone using the 1.56.651.2 RUU. I was running Flipz updated radio and DamageControl v2.0r2.. The RUU completed successfully..
I was reading over the forum post in http://forum.xda-developers.com/showthread.php?t=645002 and i read that you could boot the system using the command 'fastboot oem boot' I was going to try to use FlashRec to do the work of Flashing the recovery, then booting into recovery and use nandroid.. but you beat me to it! Good work!
I attempted flashing a new recovery image this way with no avail... I also attempted only
Code:
flash_image recovery /sdcard/recovery.img
and still was unable to boot the phone into recovery. I think it had to have been something with doing boot.img and recovery.img at the same time... I dont know what the misc.img does and I'm assuming data.img is userdata... but I did them all and then it worked...
Other users also tried flashrec and with no success... right track though.
chavo2005 said:
I was going to try something similar to this today, but i was unable to brick my phone using the 1.56.651.2 RUU. I was running Flipz updated radio and DamageControl v2.0r2.. The RUU completed successfully..
I was reading over the forum post in http://forum.xda-developers.com/showthread.php?t=645002 and i read that you could boot the system using the command 'fastboot oem boot' I was going to try to use FlashRec to do the work of Flashing the recovery, then booting into recovery and use nandroid.. but you beat me to it! Good work!
Click to expand...
Click to collapse
What do u mean by 3) PC - fastboot oem boot | MAC - oem boot?
blankd3ckskat3r said:
What do u mean by 3) PC - fastboot oem boot | MAC - oem boot?
Click to expand...
Click to collapse
if your using a pc type fastboot oem boot
if your using a mac type ./fastboot oem boot
This!
Thanks Regaw
regaw_leinad said:
if your using a pc type fastboot oem boot
if your using a mac type ./fastboot oem boot
Click to expand...
Click to collapse
Trying this right now.
So far, am getting lots of "mtd: write error" and "mtd: re-read error" Out of memory errors for flashing the recovery image. Guess I'll give this some time, and try to su again and reflash? Or should I kill it as soon as the Out of memory errors pop up and try again?
If you get errors like...
adb shell
su
flash_image recovery .........
(out of memory... etc)
Then...
just su again... so you really su twice
its what I had to do.
imekul said:
Trying this right now.
So far, am getting lots of "mtd: write error" and "mtd: re-read error" Out of memory errors for flashing the recovery image. Guess I'll give this some time, and try to su again and reflash? Or should I kill it as soon as the Out of memory errors pop up and try again?
Click to expand...
Click to collapse
Trying it a second time, and so far am getting a bunch of Out of memory errors. After the first one "finished," I did as you recommended and typed "su" a second time, and then typed the "flash_image recovery /sdcard/recovery.img" command.
So far, looks like it's giving the same errors the second time around.
This second attempt, it ended with "error writing recovery: No space left on device."
Just to be sure, I checked the SD card, and that has over 1 GB of free space.
If you're willing to allow something like logmein.com or some way for me to remote assist you, I would like to try. [email protected] if you're in.
imekul said:
This second attempt, it ended with "error writing recovery: No space left on device."
Just to be sure, I checked the SD card, and that has over 1 GB of free space.
Click to expand...
Click to collapse
Sounds awesome. Thanks. I'll e-mail you now.
Dun Dun Dun... The results are in!
imekul said:
Sounds awesome. Thanks. I'll e-mail you now.
Click to expand...
Click to collapse
dfbonney is the man!!
After a friendly little session on LogMeIn Express, I am good as new! How awesome!!
imekul said:
dfbonney is the man!!
After a friendly little session on LogMeIn Express, I am good as new! How awesome!!
Click to expand...
Click to collapse
We ended up just needing to run
Code:
adb shell
reboot
fastboot oem boot
adb shell
su
//flash commands here
that seemed to do it. so make sure if you're having issues to restart the device and try again!
Edit: Also, we didnt get data.img to work so we only did boot, recovery, and misc.img's
ROOT Status of RUU_Hero_C_Sprint_2.27.651.5_R_signed_release : YES
Update: Regaw finally made it for us all! More info here http://forum.xda-developers.com/showthread.php?t=694572
======================================================
I noticed that someone has mixed up the TEST RUU and the RELEASE RUU. However they are different. The test RUU has su file built inside, other than the release RUU!
I flashed RUU_Hero_C_Sprint_2.27.651.5_R_signed_release.exe and i love it very much.
This update is very great, except that I lose my root access. And I tried every method to get root back again but failed.
1. Using asroot2 to root - Failed
I followed the Sticky GUIDE "How to Root the Sprint CDMA Hero", but failed when running
Code:
/data/local/asroot2 /system/bin/sh
The process was killed.
I know the linux kernel changed to 2.6.29 with the update. Maybe that is the reason why asroot2 does not work.
2. Using flashrec to flash a custom recovery image and then get root - Failed
I installed FlashRec 1.1.3 from zenthought's website, but failed when I tried backingup my recovery image.
3.Using adb to push the su file into the phone - Failed
I dump the su file from damageless's rom and flipz's Fresh 2.1.1 rom. Then using adb to push it into /data/local/ and chmod it to 4777, but running failed. It just said "Permission Denied". However, i push a busybox file into /data/local/ and chmod it to 4777, the busybox command runs ok.
KeithKris pointed that Su doesn't work on /data because that directory is mounted nosuid.
4.Using fastboot to flash a custom recovery image and then get root - Failed
I reboot my phone into fastboot, then connect it to PC using USB. I tried this command "fastboot boot recovery-RA-heroc-v1.6.2.img" but faild, it said "downloading 'boot.img'... FAILED (remote: not allow)".
5.Trying to flash back to RUU_Hero_C_Sprint_2.20.651.1_signed_test.exe - Failed
It said "Error 140: BOOTLOADER Version Error!".
Although regaw_leinad has pointed that the md5s on both(release version and test version) hboots are the EXACT same.
b819083aa9fe456c5a5fbde4917980e2
and
b819083aa9fe456c5a5fbde4917980e2
Click to expand...
Click to collapse
Thanks regaw_leinad for your kind help.
Update: 6. the Volex method - Failed
this volex method is revealed here. Already tested by regaw that 2.1 patched it. It doesn't work.
======================================================
After all these failures, there seems to be at least two ways to get the root back. And regaw_leinad and other guys are working hard on them.
1. Try to make a new asroot2 to exploit the linux 2.6.29/android 2.1 on our cdma hero. Here is the source code of our asroot2 -- heroc 1.5 exploit tool.
2. Try to hack the RUU file (actually we mean the rom.zip in the RUU.exe) and make sure it will pass the Bootloader check and signature check(maybe md5?). Then we could flash a RUU with su built inside and get the root back.
If anyone knows something about how to pass the signature check(maybe md5?) or linux kernel exploit, please share your wisdom. Thank you.
This post will be updated every day until the way to root comes out.
Update: Thanks to the donators in this thread! I believe the devs will find the exploit method soon with your support!
======================================================
BTW: Never ever flash the official 2.1 release RUU.exe unless you know what you are doing. You won't get root access until the exploit method has been found. If you do love the official update, you may flash this damageless's rom dump from the official 2.1 release. And the radio dump from the official 2.1 release is here1 and here2 (thanks to damageless and flipz, and remember flashing radio at your own risk). The only difference between damageless's dump and official RUU's system part is that it has root and busybox and it removed some useless apks.
would it be more like fastboot boot /sdcard/recovery-RA-.........img?
justinisyoung said:
would it be more like fastboot boot /sdcard/recovery-RA-.........img?
Click to expand...
Click to collapse
I tried /sdcard/recovery....img again, faild. Because in this command the image file should be on the PC not on the phone.
1. Make sure you have the Android SDK installed. Read HERE for more info.
2. Download 4shared.com - online file sharing and storage - download flash_image.zip
3. Download 4shared.com - online file sharing and storage - download recovery-RA-heroc-v1.5.2.img
4. Unzip the first file, and place both in your Android SDK/tools folder.
5. Make sure USB debugging is ON
6. Connect your phone to the PC
7. Open the command window and navigate to the Android-sdk/tools folder on your computer.
8. At the prompt enter the following, one line at a time followed by enter
Code:
adb shell
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
exit
exit
adb push flash_image /system/bin
adb push recovery-RA-heroc-v1.5.2.img /sdcard
adb shell
chmod 0755 /system/bin/flash_image
reboot
9. Your phone will reboot. When it is finished, back at your command window, once again enter
Code:
adb shell
su
cd /sdcard
flash_image recovery recovery-RA-heroc-v1.5.2.img
reboot recovery
10. With any luck, you'll have the recovery image back and can load custom 2.1 based ROMS again.
__________________
elhead17 said:
1. Make sure you have the Android SDK installed. Read HERE for more info.
2. Download 4shared.com - online file sharing and storage - download flash_image.zip
3. Download 4shared.com - online file sharing and storage - download recovery-RA-heroc-v1.5.2.img
4. Unzip the first file, and place both in your Android SDK/tools folder.
5. Make sure USB debugging is ON
6. Connect your phone to the PC
7. Open the command window and navigate to the Android-sdk/tools folder on your computer.
8. At the prompt enter the following, one line at a time followed by enter
Code:
adb shell
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
exit
exit
adb push flash_image /system/bin
adb push recovery-RA-heroc-v1.5.2.img /sdcard
adb shell
chmod 0755 /system/bin/flash_image
reboot
9. Your phone will reboot. When it is finished, back at your command window, once again enter
Code:
adb shell
su
cd /sdcard
flash_image recovery recovery-RA-heroc-v1.5.2.img
reboot recovery
10. With any luck, you'll have the recovery image back and can load custom 2.1 based ROMS again.
__________________
Click to expand...
Click to collapse
Sorry dude, there is NO su file in this released version of RUU.
So you won't run su after adb shell
just a question but can you successfully run the testkeys release RUU on your phone?
I thought with new 2.1 update root access was removed and there was no way workaround to get root access. I might be wrong here.
You might want to try RUU back to 1.56 version and try to gain ROOT access and just flash ROM release by the dev's here which still give us ROOT access.
I'm not sure if it even possible to go back from 2.1 to 1.5 RUU. Maybe some with more knowleadge of RUU can chip in here.
In addition the RUU you flash is same one release by Devs here on their modify ROMs.
i dont think it is possible to ruu back to 1.5. i think a dev said something about hboot being updated so it needs a new way for root.
kashb91 said:
i dont think it is possible to ruu back to 1.5. i think a dev said something about hboot being updated so it needs a new way for root.
Click to expand...
Click to collapse
You are correct sir. There's no way to downgrade hboot (without root), just like why you can't run the 1.29 RUU if you ran the 1.56, or yours came with 1.56 on it.
F.A.I.L.
10chars
aside from people who "accidentally" installed RUU, The push to quickly root this release is probably low priority, first of all this phone is probably end of life, so the chances of it coming out of the factory with 2.1 on it are slim.
2nd I imagine when the Evo gets released this forum will become a ghost town as far as new development is concerned
gunnyman said:
aside from people who "accidentally" installed RUU, The push to quickly root this release is probably low priority, first of all this phone is probably end of life, so the chances of it coming out of the factory with 2.1 on it are slim.
2nd I imagine when the Evo gets released this forum will become a ghost town as far as new development is concerned
Click to expand...
Click to collapse
well, I'll be around here unless someone buys me an EVO &
It is actually possible to go back to 1.5 even if you used the RUU (well I should say the test RUU). I just did it yesterday so I could take my phone in for service. I'll post how I did it when I'm not mobile. Basically I created an update package to flash the old hboot then used a combination of the 2 main unroot threads. Ended up being able to use the sdcard method after flashing the misc.ing from the other method. I know probably doesn't make sense but I've got it all documented at home.
eme82 said:
It is actually possible to go back to 1.5 even if you used the RUU (well I should say the test RUU). I just did it yesterday so I could take my phone in for service. I'll post how I did it when I'm not mobile. Basically I created an update package to flash the old hboot then used a combination of the 2 main unroot threads. Ended up being able to use the sdcard method after flashing the misc.ing from the other method. I know probably doesn't make sense but I've got it all documented at home.
Click to expand...
Click to collapse
I can't WAIT to read how you did this! I have been dying to get back to original HBoot since I ran the first test RUU back in April.
gunnyman said:
aside from people who "accidentally" installed RUU, The push to quickly root this release is probably low priority, first of all this phone is probably end of life, so the chances of it coming out of the factory with 2.1 on it are slim.
2nd I imagine when the Evo gets released this forum will become a ghost town as far as new development is concerned
Click to expand...
Click to collapse
Well, if we are able to root this Sense 2.1 then theoretically the same root method may work on the Evo, thereby cutting down our wait for a rooted Evo. Just a thought.
chuckhriczko said:
Well, if we are able to root this Sense 2.1 then theoretically the same root method may work on the Evo, thereby cutting down our wait for a rooted Evo. Just a thought.
Click to expand...
Click to collapse
Very very good point I'm not getting an evo till its rooted anyway
chuckhriczko said:
Well, if we are able to root this Sense 2.1 then theoretically the same root method may work on the Evo, thereby cutting down our wait for a rooted Evo. Just a thought.
Click to expand...
Click to collapse
Possible, but I doubt it.
Chances are it's an entirely different kernel. My guess is the EVO gets a 2.6.30+ Kernel - It's hardware is completely different from ours. QUALCOM doesn't even make our chipset any more.
I updated to 2.1 using damage sprintupdate2.zip. I want to use wifi-tether now. Where can I find the version I need for this particular build? I looked on wifi-tether website, but it says the 2.1 compatible version is for Nexus One. Is there even a version for Eclair for the Hero?
Would build wireless_tether_2_0_2-pre9.apk for the N1 work?
zemerick said:
I updated to 2.1 using damage sprintupdate2.zip. I want to use wifi-tether now. Where can I find the version I need for this particular build? I looked on wifi-tether website, but it says the 2.1 compatible version is for Nexus One. Is there even a version for Eclair for the Hero?
Would build wireless_tether_2_0_2-pre9.apk for the N1 work?
Click to expand...
Click to collapse
I'm still using pre6 seems to be the one for the Hero.
zemerick said:
I updated to 2.1 using damage sprintupdate2.zip. I want to use wifi-tether now. Where can I find the version I need for this particular build? I looked on wifi-tether website, but it says the 2.1 compatible version is for Nexus One. Is there even a version for Eclair for the Hero?
Would build wireless_tether_2_0_2-pre9.apk for the N1 work?
Click to expand...
Click to collapse
Here's the link: http://code.google.com/p/android-wi...ireless_tether_1_60_htc.apk&can=2&q=HTC+Donut
*******UPDATED 8/31/10 *******
This rooting method was adapted from regaw_leinad's method and toastcfh's method. By following these steps you will successfully downgrade your phone back to android 2.1 in order to gain root.
I don't trust unrevoked as I have had problems with it in the past.
I am not responsible for any damages to your phone.
special thanks to:
regaw_leinad
Sebastian Krahmer
Toastcfh
amon_ra
FILES YOU WILL NEED:
copy and paste into browser
Code:
sdx-downloads.com/sdx/evo/troot/eng-PC36IMG.zip
evo4g.me/downloads//count.php?target=evo-root.zip
files.androidspin.com/downloads.php?dir=amon_ra/RECOVERY/&file=recovery-RA-evo-v1.8.0.img
developer.android.com/sdk/index.html
You will need the Android SDK in order to communicate between your computer and your phone. Download it (last link above) and follow the setup instructions that it comes with.
Unzip the contents of the evo-root.zip and put all the files from it into the tools folder located in the android sdk folder.
Rename the eng-PC36IMG.zip to PC36IMG.zip and then put it the tools folder located in the android sdk folder. DO NOT UNZIP IT!
******* PC36IMG.zip md5sum~ fe8aba99893c766b8c4fd0a2734e4738 *******
Move the recovery-RA-evo-v1.8.0.img into the android sdk folder as well.
Make sure usb debugging is enabled on your device. To do so go to Settings > Applications > Development > and make sure the check box is checked.
Plug your phone into the computer. Select "Charge Only" from the notifications bar.
Open up terminal and navigate your way into the android sdk folder.
Code:
cd /
cd asdk
Push all the files onto your phone.
Code:
tools/adb push /asdk/tools/flash_image /sdcard/
tools/adb push /asdk/tools/rageagainstthecage-arm5.bin /data/local/tmp/
tools/adb push /asdk/tools/mtd-eng.img /sdcard/
tools/adb push /asdk/tools/PC36IMG.zip /sdcard/
tools/adb push /asdk/tools/recovery-RA-evo-v1.8.0.img /sdcard/
Note that the PC36IMG.zip will take longer than the other files to transfer to the sdcard because it is a large file.
Now we will make rageagainstthecage.bin executable.
Code:
tools/adb shell
chmod 0755 /data/local/tmp/rageagainstthecage-arm5.bin
You should see this (below) after it has made the change.
Code:
$
Now to use the rooted shell.
Code:
cd /data/local/tmp
./rageagainstthecage-arm5.bin
You will now see some text on your terminal screen describing the exploit.
Wait for the adb shell to finish the process. At this point it may or may not terminate the current shell session in terminal. If it does then it should look like this:
Code:
users-iMac:asdk user$
If it doesn't it will return to
Code:
$
in that case you need to exit the current session. To do so type
Code:
exit
Now we need initiate a new shell which should now have root permissions.
Enter the following:
Code:
tools/adb shell
and you will see you now have a
Code:
#
instead of
Code:
$
Now we need to flash the mdt-eng.img in order for it to let us install a custom recovery
Code:
adb shell
cat /sdcard/flash_image > /data/flash_image
chmod 755 /data/flash_image
/data/flash_image misc /sdcard/mtd-eng.img
That will flash your misc partition with Toast's mtd-eng.img
This should return you to
Code:
#
Now boot into hBoot
Code:
reboot bootloader
This will reboot your phone into hBoot. It will scan for the PC36IMG.img. When it asks yes or no, select yes.
It should then reflash your phone into the engineering build.
When it asks to reboot select yes.
You will need to flash custom recovery in order to be able to flash other custom roms or modifications. I use Amon_RA's recovery because it works great and has NEVER caused me any problems.
Now, open up terminal and get back into the android sdk folder
Code:
cd /
cd asdk
Since we have already pushed the recovery onto the sdcard we only need to flash the recovery onto the phone so that we can use it
Code:
adb shell
cat /sdcard/flash_image > /data/flash_image
chmod 755 /data/flash_image
/data/flash_image recovery /sdcard/recovery-RA-evo-v1.8.0.img
Now lets rename that PC36IMG.zip file again
Code:
mv /sdcard/PC36IMG.zip /sdcard/eng-PC36IMG.zip
that way your phone doesn't try to flash it when you go into recovery each time
And last but not least we need to boot into it to flash a custom rom
Code:
reboot recovery
Your phone should then reboot into Amon_RA's recovery and you may now head over to the dev forum to find your new favorite custom rom.
very nice! can anyone confirm this? my buddy wants me to root his 2.2 and i would like to try this.
To make life easier for some people add this to your post mate, and apply it yourself if you would like.
Here is how to add your sdk/tools directory to your .bash_profile file so you won't have to navigate to the folder each time.
Download this so you'll be able to see your hidden files http://www.mediafire.com/?diimft1ninn Run it, check "Show Hidden Files" then click Restart finder. Now, navigate to your home folder (/Users/UserName/) and see if there's a .bash_profile already there. If not, create with textedit.
Now add this to the file: export PATH=${PATH}:/Path/Of/Your/Sdk/Tools/Folder
Mine is /Users/bmxrider4444/Documents/Android/SDK/tools
Now do not save it as rich text. If yours is in rich text, click on "Format" in the menu bar, and click "make plain text". Now save it as .bash_profile and uncheck "if no extension is provided, use .txt".
Now you can go back to Ghost and uncheck "Show all hidden files" and restart finder again (special thanks to ajones7279 for these steps)
Enjoy!
Just as clarification as to what this does, it enables you to run adb commands and other commands without having to navigate to the /android/tools/ folder every time you want to run adb or whatever.
does this work?
seekis said:
At this point we need to push the recovery onto the sdcard
Code:
tools/adb push "location of recovery-RA-evo-v1.8.0.img" /sdcard/
Click to expand...
Click to collapse
This is great! Thanks for the guide - I am planning on rooting my Wife's EVO but have been waiting for an easier method than the other one posted. Question on the above where we write "location of recovery-ra-evo-v1.8.0.img". Is that the exact code, or should we be adding a directory or folder location into this line? I rooted my 2.1 EVO on my Mac a couple months ago and don't remember this step. Once again - very much appreciate the help.
One last question - would it make more sense to have a custom ROM already on your SD Card prior to rooting, so that you can flash it right after you flash AMON-RA for the first time? Probably doesn't matter but thought i'd ask.
^^ same question as above, plus one other n00b question - does this method unlock NAND?
[edit] I was not insinuating that randymac88 is a n00b; I, however, am
seekis said:
I don't trust unrevoked as I have had problems with it in the past.
I am not responsible for any damages to your phone.
Click to expand...
Click to collapse
Don't trust us with the unrevoked 3.x/unrevoked forever application combo that's worked for thousands of users without sideeffects on regaw's post?
You should note to everyone that your method will screw up their PRI, reverting it back to 1.34. By using unrevoked and unrevoked forever, you can keep 1.40.
randymac88 said:
This is great! Thanks for the guide - I am planning on rooting my Wife's EVO but have been waiting for an easier method than the other one posted. Question on the above where we write "location of recovery-ra-evo-v1.8.0.img". Is that the exact code, or should we be adding a directory or folder location into this line? I rooted my 2.1 EVO on my Mac a couple months ago and don't remember this step. Once again - very much appreciate the help.
One last question - would it make more sense to have a custom ROM already on your SD Card prior to rooting, so that you can flash it right after you flash AMON-RA for the first time? Probably doesn't matter but thought i'd ask.
Click to expand...
Click to collapse
Thats not the exact code no. I just put that as a place holder you are suppose to put in the location of where you have the recovery.img. For example, the exact command for me would be:
Code:
/Users/seekis/Downloads/recovery-ra-evo-v1.8.0.img
Don't trust us with the unrevoked 3.x/unrevoked forever application combo that's worked for thousands of users without sideeffects on regaw's post?
You should note to everyone that your method will screw up their PRI, reverting it back to 1.34. By using unrevoked and unrevoked forever, you can keep 1.40.
Click to expand...
Click to collapse
As far as using unrevoked, I stated that I, ME, MYSELF, has had issues with it. not that anybody else has. By all means go and use it if you would like. I will not. It is true that you will loose PRI 1.40, but seeing as how even after installing the OTA from HTC my phone still didn't update it to 1.40, I don't see the issue.
rsage said:
^^ same question as above, plus one other n00b question - does this method unlock NAND?
[edit] I was not insinuating that randymac88 is a n00b; I, however, am
Click to expand...
Click to collapse
i believe it does unlock nand seeing as how i adapted it from toasts method
Hey Seekis - question, I'm stuck here. I keep getting "permission denied", or "operation not permitted" when trying to make the exploit executable at this step:
chmod 0755 /data/local/tmp/rageagainstthecage-arm5.bin
Am I missing something? I've tried a million times and can't seem to get past this. I've successfully pushed all the files onto the sdcard.
I've also have had some trouble finding the exact root path to these files. I've been able to navigate, but I would think a lot of users would have some trouble.
Regardless, many thanks for getting this posted...
EDIT: I pushed the rageagainstthecage file to the sdcard by mistake. Will try again tomorrow.
ok i got rid of that step by moving the file into the android sdk and pushing it with all the other files
Okay now I appear to be in big trouble as I've just messed up my wife's phone, and its probably going to be unusable for a while until I get this figured out (assuming I do!).
I got through most of the process. I flashed the PC36IMG.zip file; however when it asked to reboot, it just dumped me back into the bootloader. Whenever I say reboot, it just takes me back to the bootloader. Pull the battery, same thing - bootloader. Yikes.
I don't know how to get to the next step because I can't get into a booted rom in order to flash the amon-ra recovery. Am I totally effed? Can anyone help me here?
EDIT: Okay reflashed the PC36IMG.zip file, and it rebooted into the stock ROM. Onward! Phew!!
The wife's EVO is now fully rooted running Baked Snack 1.5 w/Netarchy's kernel. Touch and go there for a minute, but it all worked out. No 1.40 PRI, but I don't really care about that right now.
Woot! Thanks Seekis!!
do u have to push the pc36img with adb every time or will drag and drop work or copy and paste work?
FoxHound630 said:
do u have to push the pc36img with adb every time or will drag and drop work or copy and paste work?
Click to expand...
Click to collapse
You can mount the card on your system and copy paste it over as well, yes.
randymac88 said:
Okay now I appear to be in big trouble as I've just messed up my wife's phone, and its probably going to be unusable for a while until I get this figured out (assuming I do!).
I got through most of the process. I flashed the PC36IMG.zip file; however when it asked to reboot, it just dumped me back into the bootloader. Whenever I say reboot, it just takes me back to the bootloader. Pull the battery, same thing - bootloader. Yikes.
I don't know how to get to the next step because I can't get into a booted rom in order to flash the amon-ra recovery. Am I totally effed? Can anyone help me here?
EDIT: Okay reflashed the PC36IMG.zip file, and it rebooted into the stock ROM. Onward! Phew!!
Click to expand...
Click to collapse
Had the same issue. When i first booked into the bootloader i had to select recovery then flash PC36IMG.zip. Then boot loop. Then i went back into the bootloader and it automagically read in the PC36IMG.zip and flashed it, then i got stock 2.1 root. Just a few minutes of "oh crap"
I'm stuck. I got as far as flashing PC36IMG.zip, which was successful, as my phone now runs 2.1, but it doesn't appear I'm rooted. When I go back into the adb shell, I'm getting the $ prompt, and running
Code:
cat /sdcard/flash_image > /data/flash_image
gives me a permission denied error. Help!
atom_jack said:
I'm stuck. I got as far as flashing PC36IMG.zip, which was successful, as my phone now runs 2.1, but it doesn't appear I'm rooted. When I go back into the adb shell, I'm getting the $ prompt, and running
Code:
cat /sdcard/flash_image > /data/flash_image
gives me a permission denied error. Help!
Click to expand...
Click to collapse
i dont know what to tell you other than try again. this happened to me the first time through as well. i dont know why. i just started from the top and it worked the second time through.
seekis said:
i dont know what to tell you other than try again.
Click to expand...
Click to collapse
So after you flash PC36IMG.zip you should automatically get a root (#) prompt when going into the shell? ie, I'll have rooted 2.1 yes?
seekis said:
this happened to me the first time through as well. i dont know why. i just started from the top and it worked the second time through.
Click to expand...
Click to collapse
Aha. Ok, I will keep trying til it gives me a root shell, I guess. I also tried unrevoked3 but that didn't seem to work.
Success!! So, I stupidly assumed that all PC36IMG.zip's were the same, and was using the one from the original 2.2 PC thread. Once I got the correct one, voila!
You might want to post the md5 of the one you are using, so there's no confusion for others. Also, you missed a tiny step when you first start up hboot - you have to select fastboot for it to start scanning for PC36IMG.zip.
Thanks!
Hey guy's, I've beentrying to install clockworkmod on my Epic for some time now to no avail. See, I just rooted my phone using the noobnl's "one click method v2.2.6". The only recovery I have on my phone as of right now is tthe stock recovery. I've read just about every post about the installation on clockworkmod recovery and tried accordingly. Still no custom ecovery. Im really noob to all this "wiz stuff", and would greatly appreciate any help you guy's could give me. Perhaps some DETAILED step by step instructions ( CUZ IM REAL BRAIN DEAD AT TIMES )?? I have DI11 installed on my phone as of now, and im running the stock kernel v2.6.29. again, Im rooted with "noobnl's one click" and I do have root. Also, I need to know if you download to my pc, then push it to my phone using command prompt? Do I flash it with Odin? And what do I do after I run the clockworkmod exploit? Will I have custom recovery after that, is there anymore steps involved? Thank you all for making this site the best web site I"ve been on so far. You guy's are the best. Please hel[p with my dumb question, and sorry to waste your time. Thankx IA..
http://forum.xda-developers.com/showthread.php?t=782300
Download the .zip from that. Extract it to your desktop and rename the folder "cwm". Open up command prompt. Type this:
Code:
cd C:\Users\YOUR USER NAME\Desktop\cwm
adb shell
su
remount rw
exit
exit
After that, run the run.bat from the folder.
Download the .zip from that. Extract it to your desktop and rename the folder "cwm". Open up command prompt. Type this:
Code:
cd C:\Users\YOUR USER NAME\Desktop\cwm
adb shell
su
remount rw
exit
exit
After that, run the run.bat from the folder.
Click to expand...
Click to collapse
Excuse the stupid question please, do I have the sdcard mounted, or unmounted? I heard it can be done either way...
The only thing you use Odin for is to flash a complete .tar file. Ie, returning to stock, or updating to a new release DG27, DI07, or DI18
sniperkill said:
Excuse the stupid question please, do I have the sdcard mounted, or unmounted? I heard it can be done either way...
Click to expand...
Click to collapse
Make sure it is NOT mounted as a mass storage device. Make sure you can access it from the phone. So, don't mount it.
LSanna1488 said:
The only thing you use Odin for is to flash a complete .tar file. Ie, returning to stock, or updating to a new release DG27, DI07, or DI18
Click to expand...
Click to collapse
Technically, custom ROMs can be made for Odin, too... But since it's not a very good method, everyone prefers the recovery method. noobnl released his first rooted kernel for Odin. Odin does a lot more than just complete .tars.
LSanna1488 said:
The only thing you use Odin for is to flash a complete .tar file. Ie, returning to stock, or updating to a new release DG27, DI07, or DI18
Click to expand...
Click to collapse
I ran the commands as you stated, then ran the exploit. It keeps saying,
"remove stock recovery patcher"
"device not found"
system (something) install recovery.sh permission denied
"system/recovery-from-boot.p permission denied
failed to copy 'zImage' to /sdcard/zImage: permission denied
reboot: operation not permitted
im failed for /sdcard/zImage, permission denied
So what do you think is going on? Any thoughts?
I had same exact issue. Went back to completely stock then rooted then did clockwork. Do not mount sd card. Follow instructions exactly.
Sent from my SPH-D700 using XDA App
I'm having the same issue. When trying to 'su' to do the remount I'm getting a permission denied... but apps that require root seem to be working.
sniperkill said:
I ran the commands as you stated, then ran the exploit. It keeps saying,
"remove stock recovery patcher"
"device not found"
system (something) install recovery.sh permission denied
"system/recovery-from-boot.p permission denied
failed to copy 'zImage' to /sdcard/zImage: permission denied
reboot: operation not permitted
im failed for /sdcard/zImage, permission denied
So what do you think is going on? Any thoughts?
Click to expand...
Click to collapse
Is your phone in debug mode? (Settings -> Applications -> Development -> USB Debugging) Did it actually let your run those commands I told you?
Yes, my phone is in fact in debugg mode. My desktop command prompt does let me run the commands.
Adb devices
Adb shell
Su #
Remount rw
Exit
Exit
After I type the command "su" it gives me the #. Then on my phone a superuser request comes thru and askes to chose "yes" or "no". So I hit "yes". But when I run the exploit in the beginning it says "mount", and it says that the operation is not permitted... then it starts saying "I'm failed for" and "operation not permitted" and so on.. I think I'm missing a step somewhere but I don't kno...
Sent from my SPH-D700 using XDA App
Running su through adb shouldn't ask for permission the phone... that is weird.
Sent from my SPH-D700 using XDA App
I spent the weekend trying to get my Epic rooted and cwm installed. I was finally successful with both. CWM I had to install by typing in each command that was in the bat through the cmd window with adb.
Flak said:
I spent the weekend trying to get my Epic rooted and cwm installed. I was finally successful with both. CWM I had to install by typing in each command that was in the bat through the cmd window with adb.
Click to expand...
Click to collapse
So exactly what are the steps you took to install clockworkmod manually through windows command prompt? Do I just look in the bat exploit?
Hi,
I have the HTC Inspire 4g with:
Software #: 3.20.502.52 710RD
Android Version 2.3.5
HTC Sense 3.0
Baseband version: 12.69a.60.29u_26.17.14.11_M
I have unlocked the bootloader using htcdev and have successfully rooted the the device but i'm still S-ON. I have tried installing some custom ROMs however after flashing the device did not boot. I understand that I have to flash the boot.img file located in the .zip file of the custome ROM. That I know how to do... My concern is that I want to try out some ROMs but as a precaution I would like to have the stock RUU file for the type device I have should I need to restore it.
I did create a backup of my ROM and have used it previously to restore the phone after installing the custom roms that haven't boot. I just want to know if I flash the boot.img file will a restore bring it back to where it was before the flash or do i need the RUU file to restore stock?
If the later please advice where I can find that particular file as I've searched but can't seem to find the one to use.
Thanks a million.
360fifa
360fifa said:
Hi,
I have the HTC Inspire 4g with:
Software #: 3.20.502.52 710RD
Android Version 2.3.5
HTC Sense 3.0
Baseband version: 12.69a.60.29u_26.17.14.11_M
I have unlocked the bootloader using htcdev and have successfully rooted the the device but i'm still S-ON. I have tried installing some custom ROMs however after flashing the device did not boot. I understand that I have to flash the boot.img file located in the .zip file of the custome ROM. That I know how to do... My concern is that I want to try out some ROMs but as a precaution I would like to have the stock RUU file for the type device I have should I need to restore it.
I did create a backup of my ROM and have used it previously to restore the phone after installing the custom roms that haven't boot. I just want to know if I flash the boot.img file will a restore bring it back to where it was before the flash or do i need the RUU file to restore stock?
If the later please advice where I can find that particular file as I've searched but can't seem to find the one to use.
Thanks a million.
360fifa
Click to expand...
Click to collapse
RUU 3.20.502.52
Thank you kindly for taking the time to respond and also help.
Hi Gizmoe,
is there a rooted and s-off RUU file I could use as well?
Thanks again..
360fifa said:
Hi Gizmoe,
is there a rooted and s-off RUU file I could use as well?
Thanks again..
Click to expand...
Click to collapse
RUU 's can not be modified. You will not lose s off however by running an ruu. After you run ruu just pd98img a recovery and flash away.
Gizmoe said:
RUU 's can not be modified. You will not lose s off however by running an ruu. After you run ruu just pd98img a recovery and flash away.
Click to expand...
Click to collapse
So are you saying that I would need to unlock the bootloader again then following the same steps I have now? I had the impression based off could threads I've read that there's a way to root the device while gaining S-OFF that will allow me to avoid having to manually flash the boot.IMG everytime i install a custom rom. If there's a thread I can read or a guide to follow please provide a link so that I can proceed. Oh, does all the pd98img file the same?
Thanks again.
360fifa
360fifa said:
So are you saying that I would need to unlock the bootloader again then following the same steps I have now? I had the impression based off could threads I've read that there's a way to root the device while gaining S-OFF that will allow me to avoid having to manually flash the boot.IMG everytime i install a custom rom. If there's a thread I can read or a guide to follow please provide a link so that I can proceed. Oh, does all the pd98img file the same?
Thanks again.
360fifa
Click to expand...
Click to collapse
Yeah that's right. Your not s off. Well here is the only method left for the inspire. It may be a bit intimidating but really isn't that hard. Here is link.
http://tau.shadowchild.nl/attn1/?cat=6
Gizmoe said:
Yeah that's right. Your not s off. Well here is the only method left for the inspire. It may be a bit intimidating but really isn't that hard. Here is link.
Click to expand...
Click to collapse
Your're right very intimidating, however I'm willing to try my only concern is what is dd highlighted below "High Level Steps (some detail deliberately NOT included)
htc dev unlock, install cwm recovery and root ONLY
dd the stock boot image to /data/local/tmp and pull it to your pc HD (/dev/block/mmcblk0p22 is boot)
adb shell dd if=/dev/block/mmcblk0p22 of=/data/local/tmp/boot.img
adb pull /data/local/tmp/boot.img"?
Also i navigated to the folder on my device however it doesn't show any boot.img file. Just a init.rc file. Could you explain just this part of it please?
Thanks again,
360fifa
360fifa said:
Your're right very intimidating, however I'm willing to try my only concern is what is dd highlighted below "High Level Steps (some detail deliberately NOT included)
htc dev unlock, install cwm recovery and root ONLY
dd the stock boot image to /data/local/tmp and pull it to your pc HD (/dev/block/mmcblk0p22 is boot)
adb shell dd if=/dev/block/mmcblk0p22 of=/data/local/tmp/boot.img
adb pull /data/local/tmp/boot.img"?
Also i navigated to the folder on my device however it doesn't show any boot.img file. Just a init.rc file. Could you explain just this part of it please?
Thanks again,
360fifa
Click to expand...
Click to collapse
DD is copy and convert. It will copy boot files and convert it into boot.img. Use adb shell to do it as shell works within phone directories. Then pull it from pc using adb pull. He is giving you the exact adb commands to do both.
Code:
adb shell
dd if=/dev/block/mmcblk0p22 of=/data/local/tmp/boot.img
adb pull /data/local/tmp/boot.img
Gizmoe said:
DD is copy and convert. It will copy boot files and convert it into boot.img. Use adb shell to do it as shell works within phone directories. Then pull it from pc using adb pull. He is giving you the exact adb commands to do both.
Code:
adb shell
dd if=/dev/block/mmcblk0p22 of=/data/local/tmp/boot.img
adb pull /data/local/tmp/boot.img
Click to expand...
Click to collapse
Lol... I figured those were the commands to use, was just wondering what dd stand for.. ( copy and convert ). So let me see if i understand whats happening in the code.
So firstly I need to have the the HTC drivers installed and have the Android SDK on the root of c drive. Basically the same folder used when I unlocked to bootloader. In that folder I have the adb files, should I also add the files listed in the zip file he provided? If so let me explain the code, if no please shed some light.
So adb shell starts the emulator with the device
dd if=/dev/block/mmcblk0p22 of=/data/local/tmp/boot will copy and convert the mmcblk0p22 file if it is found in the /dev/block folder on the device and place it to the /data/local/tmp/ folder and call it boot.img
adb pull /data/local/tmp/boot.img I'm thinking that the computer is going to pull the boot.IMG file from the /data/local/tmp folder however where is it putting it? In the same folder that I started the command prompt from? That is the Android folder on my c drive?
360fifa said:
Lol... I figured those were the commands to use, was just wondering what dd stand for.. ( copy and convert ). So let me see if i understand whats happening in the code.
So firstly I need to have the the HTC drivers installed and have the Android SDK on the root of c drive. Basically the same folder used when I unlocked to bootloader. In that folder I have the adb files, should I also add the files listed in the zip file he provided? If so let me explain the code, if no please shed some light.
So adb shell starts the emulator with the device
dd if=/dev/block/mmcblk0p22 of=/data/local/tmp/boot will copy and convert the mmcblk0p22 file if it is found in the /dev/block folder on the device and place it to the /data/local/tmp/ folder and call it boot.img
adb pull /data/local/tmp/boot.img I'm thinking that the computer is going to pull the boot.IMG file from the /data/local/tmp folder however where is it putting it? In the same folder that I started the command prompt from? That is the Android folder on my c drive?
Click to expand...
Click to collapse
You will want to work out of the platform-tools directory.
Yes adb pull will always pull to your working directory unless another path is specified. Adb shell will need root. So if you type adb shell and don't see a # sign type su to get it. When done in adb shell you will need exit so you can pull to computer. If you had to take two steps to get a # prompt then you will type exit twice.
Gizmoe said:
You will want to work out of the platform-tools directory.
Yes adb pull will always pull to your working directory unless another path is specified. Adb shell will need root. So if you type adb shell and don't see a # sign type su to get it. When done in adb shell you will need exit so you can pull to computer. If you had to take two steps to get a # prompt then you will type exit twice.
Click to expand...
Click to collapse
Kool, thats the directory i'm referring to... I'm sure i'm already rooted. But your saying that when i send the command "adb shell" if I don't see the # sign then i should type su. Are you then saying that if I had to type su twice then I need to hit exit twice to pull to pc?
Oh before I forget should i run ruu before attempting this or remain as is? Also, do I need cmw recovery installed or can i remain on twrp 2.6.0.0?
Thanks again bro..
360fifa
360fifa said:
Kool, thats the directory i'm referring to... I'm sure i'm already rooted. But your saying that when i send the command "adb shell" if I don't see the # sign then i should type su. Are you then saying that if I had to type su twice then I need to hit exit twice to pull to pc?
Oh before I forget should i run ruu or remain as is?
Thanks again bro..
360fifa
Click to expand...
Click to collapse
Yes you would need to type su to see #. Adb shell root access works independently of phone root. It needs root access over adb which without an UN-secure boot img will need the su command. Exit for each level. Once for su and once for shell itself. You want to exit until you are back at Windows directory. Adb shell is at the phones root directory. The dd command is moving files within the phone, while Adb pull would be used to copy from phone to pc. I would not run that ruu if you are going to try and s off. I would run 2.47.502.7. Which I posted a link in the att stock Rom thread.
---------- Post added at 05:35 PM ---------- Previous post was at 05:33 PM ----------
http://forum.xda-developers.com/showthread.php?p=50027824
Gizmoe said:
Yes you would need to type su to see #. Adb shell root access works independently of phone root. It needs root access over adb which without an UN-secure boot img will need the su command. Exit for each level. Once for su and once for shell itself. You want to exit until you are back at Windows directory. Adb shell is at the phones root directory. The dd command is moving files within the phone, while Adb pull would be used to copy from phone to pc. I would not run that ruu if you are going to try and s off. I would run 2.47.502.7. Which I posted a link in the att stock Rom thread.
---------- Post added at 05:35 PM ---------- Previous post was at 05:33 PM ----------
http://forum.xda-developers.com/showthread.php?p=50027824
Click to expand...
Click to collapse
Do i need to run a ruu or can I proceed as is? If so u recommend running the 2.47.502.7 ruu before going thru the adb commands, y?
Thanks again..
360fifa said:
Do i need to run a ruu or can I proceed as is? If so u recommend running the 2.47.502.7 ruu before going thru the adb commands, y?
Thanks again..
Click to expand...
Click to collapse
Yes go ahead and proceed as is. You should not have any issues. If not successful then try ruu. You may not be able to run the older ruu if your bootloader is newer. Which in that case just run the newer one. I beleive I used this process on a phone with the newer software but the older works for sure.
Gizmoe said:
Yes go ahead and proceed as is. You should not have any issues. If not successful then try ruu. You may not be able to run the older ruu if your bootloader is newer. Which in that case just run the newer one. I beleive I used this process on a phone with the newer software but the older works for sure.
Click to expand...
Click to collapse
Gizmoe you have been very patient and very helpful i thank you a million times. If i encounter any other issues I'll definitely let you know.
Thanks again..
360fifa
360fifa said:
Gizmoe you have been very patient and very helpful i thank you a million times. If i encounter any other issues I'll definitely let you know.
Thanks again..
360fifa
Click to expand...
Click to collapse
I encountered an issue while trying to pull the boot.img file from /data/local/tmp/. The command used was adb pull /data/local/tmp/boot.img I then got a msg saying the adb is not a command, if I remove the adb and send the command with just pull it says pull is not a command.
If I exit su "#" it brings me to $ and if I send the command again it says that I don't have permission. Can you advise what I might be doing wrong? Oh, I got the mmcblk0p22 file to copy and convert into the boot.img file. I was able to see it using ES File explorer on my phone.
Do I need to go in fastboot usb, does unknown sources need to be checked?
Thanks again.
360fifa said:
I encountered an issue while trying to pull the boot.img file from /data/local/tmp/. The command used was adb pull /data/local/tmp/boot.img I then got a msg saying the adb is not a command, if I remove the adb and send the command with just pull it says pull is not a command.
If I exit su "#" it brings me to $ and if I send the command again it says that I don't have permission. Can you advise what I might be doing wrong? Oh, I got the mmcblk0p22 file to copy and convert into the boot.img file. I was able to see it using ES File explorer on my phone.
Do I need to go in fastboot usb, does unknown sources need to be checked?
Thanks again.
Click to expand...
Click to collapse
You need to exit one more time so you can see c prompt with your platform tools folder. Your still in shell therefore still in phone and not actually pulling to your pc. Only the pc uses Adb commands so you have to be at your platform tools folder. If you restart your phone temp empties too so if you can't see boot img anymore that's why.
Gizmoe said:
You need to exit one more time so you can see c prompt with your platform tools folder. Your still in shell therefore still in phone and not actually pulling to your pc. Only the pc uses Adb commands so you have to be at your platform tools folder. If you restart your phone temp empties too so if you can't see boot img anymore that's why.
Click to expand...
Click to collapse
Okay.. I am going to try that now, I swore I did that as well but lets see.
360fifa said:
Okay.. I am going to try that now, I swore I did that as well but lets see.
Click to expand...
Click to collapse
Here's what it said "failed to copy '/data/local/tmp/boot.img' to ' ./boot.img': Permission denied