My phone is not showing 4G or H after flashing LeeDroid. It's always connected to 3G, even in places I used to get 4G. I am not sure if it has anything to do with LeeDroid but I had flashed it back to stock and 4G came up fine. Then I flashed LeeDroid again and it's back on 3G.
Any solution? or LeeDroid would show 3G even if the phone is connected to 4G?
I have toggled network (GSM only and Auto). Turned Mobile network off and on multiple times.
Using a Sensation 4G (and 4G Simcard)
I had this same problem. Did you try flashing the new kernal? worked for me.
Edit: I've attached the kernal in case you haven't flashed it
tarek972 said:
My phone is not showing 4G or H after flashing LeeDroid. It's always connected to 3G, even in places I used to get 4G. I am not sure if it has anything to do with LeeDroid but I had flashed it back to stock and 4G came up fine. Then I flashed LeeDroid again and it's back on 3G.
Any solution? or LeeDroid would show 3G even if the phone is connected to 4G?
I have toggled network (GSM only and Auto). Turned Mobile network off and on multiple times.
Using a Sensation 4G (and 4G Simcard)
Click to expand...
Click to collapse
well since these roms are not based of tmo 4g stock rom, they're gonna show you are connected to 3g. IF you are actually in an area of "4g" then the H will show. so im guessing you never really had "4g" before?
also, i too do have leedroid and it sits on 3g, but when i load a page or do anything thats pulling data (netflix for ex) then the H shows and stays up there.
and my H speeds are consistent to what my "4g" speeds used to be
i would try and do a speed test and just make sure
Hi, I put in leedroid on my sensation and did the mistake of letting my battery depleting, now it won't boot up , wondering if it's the rom or my batteries dead
Related
I loaded the CM ROM and now the NSCollab 1.0.17 and since then I now have an "H" where my 3G used to be. The phone seems to work just fine, and every so often it blinks 3G. I don't know if I'm supposed to flash a new radio zip or what, or if anything's wrong. It has KB1.
Netconn said:
I loaded the CM ROM and now the NSCollab 1.0.17 and since then I now have an "H" where my 3G used to be. The phone seems to work just fine, and every so often it blinks 3G. I don't know if I'm supposed to flash a new radio zip or what, or if anything's wrong. It has KB1.
Click to expand...
Click to collapse
There is no problem at all. H is better than 3g, it's like a 3.5g network. You will get the 3g signal in places where Nexus can't find the H network (better)
I don't think anythings wrong, I had that happen to my moto defy when i had it. H = hsdpa or something anong those lines. Basicly means 4g. I don't think you're running 4g tho
Sent from my ADR6300 using XDA App
I certainly wouldn't complain if it was 4G but this phone doesn't have a 4G radio. T-Mobile in Los Angeles county. And it's no faster then it was when it only said 3G.
Netconn said:
I certainly wouldn't complain if it was 4G but this phone doesn't have a 4G radio. T-Mobile in Los Angeles county. And it's no faster then it was when it only said 3G.
Click to expand...
Click to collapse
It just means that the Nexus S is connecting to your carriers network using the HSDPA specification (which has higher theoretical speeds) rather than UTMS (standard 3G, slower theoretical speeds).
Stock doesn't have the H icon enabled, but almost every custom rom does.
Sent from my Google Nexus S
OK, that makes sense. I thought I did something wrong trying to learn how to root and flash.
What is the difference between the radio sw, KB1, 2 & 3? Thanks...
I just flashed my Inspire 4G with Android Revolution 4G 3.5 and the recommended radio and all went fine. But I have a 4G data plan and the phone says "3G AT&T". And on my status bar it is showing "H" not "H+" as it did before I flashed it.
I notice sometime on boot up that I see a red notification on the screen that says something about "Limited service" ( or something like that).
I was wondering if anyone could shed some light on this matter for me.
Thanks,
HoboZ
If I'm not mistaking I think some ROM don't show the H+ and some do
Sent from my Desire HD using XDA Premium App
thanks for the reply. I will test my speeds and see if it is just the rom not showing H+ of 4G like the stock does.
The "H" or "H+" thing is purely cosmetic.
If you notice that speeds on Android Revolution aren't as fast as your stock ROM, check out this thread.
I too just flashed Revolution 3.5 and this is completely normal. Speedtest shows I'm getting 2.3 Mbps up and 1.3 Mbps down (and that's with only three bars of signal) with just the "H" icon showing. As I understand it the AT&T ROM will actually show H+ for anything faster than EDGE, so it's just a gimmick.
Thanks, that puts my mind at ease. I also ran speed tests and I And am getting the same speeds as before, maybe a little better.
edit: getting 2.6 mbps down, 1.2 mbps, 4G in my area sux.. But thats what I got before.
Sent from my Desire HD using XDA App
Ever since the 4g outage my thunderbolt is no longer able to connect to a 3g network. Whenever I leave a 4g coverage area it goes immediately to 1x. I've got LTE on/off and have tried both "CDMA + LTE/EvDo auto" and "CDMA auto (PRL)" and neither get me connected to 3g.
My Thunderbolt is rooted but is running the stock ROM that came with the original root instructions, not running a custom ROM. I haven't done much if anything to customize it.
Any ideas on how I might be able to fix or troubleshoot this?
Thanks in advance.
Michael
It is not your device.
Verizon is still reporting various outages as they are still updating the LTE network.
I have more or less the same issues from time to time since the outage and I can mostly get back to 3G by doing a battery pull when I'm in a known 3G area.
When I'm in a 4G area the only way for my device to revert back to 4G is again to do another battery pull. As I write this my weather widget will not update even as my device shows that I'm in a 4G network. To verify that it wasn't just my device I look at another TBolt here at work and the same is happening to that device.
Hang tight is all I can offer.
did you update your radio? if you're rooted, you may not have gotten the pushed update for TBolts that updates the radio. try flashing the new radio file. 4G works great on my stock roms.
No I haven't flashed anything - where can I get the updated files? Is it a whole new rom or can I just update the files?
BTW pulling the battery seems to have fixed it - now seeing 3g/4g switching. Although the last time I was in my hometown there was 4g here and now there's not. I suppose that's Verizon working on their network.
mryerse said:
Ever since the 4g outage my thunderbolt is no longer able to connect to a 3g network. Whenever I leave a 4g coverage area it goes immediately to 1x. I've got LTE on/off and have tried both "CDMA + LTE/EvDo auto" and "CDMA auto (PRL)" and neither get me connected to 3g.
My Thunderbolt is rooted but is running the stock ROM that came with the original root instructions, not running a custom ROM. I haven't done much if anything to customize it.
Any ideas on how I might be able to fix or troubleshoot this?
Thanks in advance.
Michael
Click to expand...
Click to collapse
I had the same problem. 4G would work but in a 3G area I got 1X. So I rebooted the phone and it fixed the problem. Can you try that?
I rooted my Inspire 4G using Hack-ace and installed 2.3.3 Gingerbread (Android Revolution HD 4G 5.1.3). Everything seems to be working fine, but my network is showing only an H icon, and in the network info it's showing as HSDPA. I then flashed a stock version on my phone, and again everything is working, but still showing HSDPA. I then attempted to use hack-ace to bring my radio back to stock. Still showing as HSDPA. My Download/Upload is about 1.55 down/ 1.38 up. How do I get HSUPA working?
What is the Best Radio to use for Sensation 4g Running CM7? My 4g is kind of off... I sometimes get really good speeds and sometimes it'll act like a dial up connection! Any help would be much appreciated!
they recommend to use the version 10.56.9035.00U_10.14.9035.01. check here to download it.
dunno if CM7 has the 4g icon in it.
check you radio version to see which one you have. do you have any other issue, with the wifi for example?
Wifi works fine. im running 10.56.9035.00P_10.14.9035.01_M It has the H Icon which is 4G but it is going in and out from H to 3G to G to E. Depending on where I am at.
DSTARK71 said:
Wifi works fine. im running 10.56.9035.00P_10.14.9035.01_M It has the H Icon which is 4G but it is going in and out from H to 3G to G to E. Depending on where I am at.
Click to expand...
Click to collapse
I guess it's just your network that is not fully 4g covered. I have the same thing here in my country. When I received my sensation, I had the 4g icon wherever I was, but when I flashed my first custom rom, and radio, I guess the thing became more sensitive and shown 3g and H icons.
Sent from my HTC Sensation 4G using XDA