Backin Up in ClockWorkManager.. - HTC Sensation

Why is It That when I Go To Do A Back up The Bar at the Bottom Doesnt Move.. It Doesnt Show Like The Progress/ Percentage... At all.... Is It Sopposed To Take That Long I Let It Sit For 6 Mins And Nothing Did It Twice.. It Shows S-off...But Idk im I Missin A Step?
Please Help

It is longer, but I noticed this is also because on my Nexus S most roms were 70-90MB in size, where as now on this phone they are 350-400MB in size. So they will take much longer. I have noticed that the progress bar also does not seem to move when doing so, and sometimes I catch it go half way then full but it is not as fluid as some of the other phones.

this is B4 Installin The Rom Tho... Im Up To
1. Download the file su-2.3.6.3-ef-signed.zip from here: DOWNLOAD [CHECK]
2. Copy su-2.3.6.3-ef-signed.zip to your SD card root folder (main folder of your memory card) [CHECK]
3. Start clockworkmod recovery [CHECK]
4. BACKUP YOUR ROM USING CWM BEFORE ATTEMPTING ROOT! [Here is Right About Where The Progress Bar gets Stuck At 0.... When Im Backin Up.... Should I just Leave It For Like Half An Hr?... is that Normal?... How Long Did It Take U to back Up the First Time? Is It My Apps?....

???...............

Slicktune said:
this is B4 Installin The Rom Tho... Im Up To
1. Download the file su-2.3.6.3-ef-signed.zip from here: DOWNLOAD [CHECK]
2. Copy su-2.3.6.3-ef-signed.zip to your SD card root folder (main folder of your memory card) [CHECK]
3. Start clockworkmod recovery [CHECK]
4. BACKUP YOUR ROM USING CWM BEFORE ATTEMPTING ROOT! [Here is Right About Where The Progress Bar gets Stuck At 0.... When Im Backin Up.... Should I just Leave It For Like Half An Hr?... is that Normal?... How Long Did It Take U to back Up the First Time? Is It My Apps?....
Click to expand...
Click to collapse
it does not matter i backup twice with out it moving but its working if you read the next steps over top of the bar you will see that its working

Slicktune said:
Why is It That when I Go To Do A Back up The Bar at the Bottom Doesnt Move.. It Doesnt Show Like The Progress/ Percentage... At all.... Is It Sopposed To Take That Long I Let It Sit For 6 Mins And Nothing Did It Twice.. It Shows S-off...But Idk im I Missin A Step?
Please Help
Click to expand...
Click to collapse
yeah,dont worry, the bar doesnt show any "progress" (it'll prolly be fixed in the next update) bt it is infact doing the back up, just be patient, and even if you read below that it tells you what its doin till it finishes

I Apreciate Everyones reply's But Thats The thing It Doesnt say When The Back Up Is Done...So How do I Know When The Back Up is Done... So I Dont Know Where To click, Ive Clicked Every Button, I Had To take Out The Battery...But Then When I Go Back To The Retore..there Seems To be a Back Up... But Who Knows If I Might Of Canceled It Half way Thru The Back Up.... And Then imagen When I Go To back Up... And Its Corrupted...

piimp said:
yeah,dont worry, the bar doesnt show any "progress" (it'll prolly be fixed in the next update) bt it is infact doing the back up, just be patient, and even if you read below that it tells you what its doin till it finishes
Click to expand...
Click to collapse
I've found that the setting to show progress is actually stuck off when you first install Rom Manager, even though it is checked.
Uncheck and recheck the option in Rom Manager settings, and it should show your progress from then on.

gbzbar said:
I've found that the setting to show progress is actually stuck off when you first install Rom Manager, even though it is checked.
Uncheck and recheck the option in Rom Manager settings, and it should show your progress from then on.
Click to expand...
Click to collapse
Is That Setting in Recovery Mode Or After The phone Starts Up ...In the App menu... Cuz Ive Searched For the App in My Menu And Its Not there...

**Sniff Sniff**
............???

gbzbar said:
I've found that the setting to show progress is actually stuck off when you first install Rom Manager, even though it is checked.
Uncheck and recheck the option in Rom Manager settings, and it should show your progress from then on.
Click to expand...
Click to collapse
i dint realize that, but i looked at mine and realized that it was unchecked, which means that the backup/restore should show progress bar but if u check the box then it disables this. so we'll c if i get a progress bar next time.

Slicktune said:
Is That Setting in Recovery Mode Or After The phone Starts Up ...In the App menu... Cuz Ive Searched For the App in My Menu And Its Not there...
Click to expand...
Click to collapse
still havent figured out this multiquote thing...
bt anyway, you need to download rom manager from marked and grant it su permission and then look in the settings
but if your restore doesnt even show you what its doing? (it'll say restoring system, then restoring data.....blah blah) and just stays there black, then maybe you have a bigger problem. hopefully someone here with more experience with this can help you out on that one

piimp said:
i dint realize that, but i looked at mine and realized that it was unchecked, which means that the backup/restore should show progress bar but if u check the box then it disables this. so we'll c if i get a progress bar next time.
Click to expand...
Click to collapse
Just saw that post too, and am running a backup right this second. I am indeed seeing a progress bar again.
ROM Manager says that this will slow down the process, but it'll be worth it to satisfy the anal-retentive part of my brain that can't stand being without visual indicators of progress!
Big thanks to gbzbar for pointing out that setting that I know a lot of people have missed thus far!

sosquidtaste said:
Just saw that post too, and am running a backup right this second. I am indeed seeing a progress bar again.
ROM Manager says that this will slow down the process, but it'll be worth it to satisfy the anal-retentive part of my brain that can't stand being without visual indicators of progress!
Big thanks to gbzbar for pointing out that setting that I know a lot of people have missed thus far!
Click to expand...
Click to collapse
Yeah, now it shows the progress bar on mine
Sent from my HTC Sensation 4G using XDA Premium App

Related

[ROM] Cyanogen 4.2.4 + Navigation MT3G ONLY!

PLEASE GO TO MY OTHER LINK, ALL INCAP'D in an UPDATE.ZIP!!!
FOR SAPPHIRE
I read a post earlier about fixing some apps not working.
in build.prop
change to 4 instead of 5.
ro.build.version.sdk=4
Did this and re-ran part 1 and part 2. Works fine with Handcent and facebook app working. haven't got any FC with other apps and navigation still working after a few hours and some reboots.
Uploaded a new .rar with changes to build.prop
http://www.mediafire.com/?jwhmkzay2mm
Extract All to Desktop
Run part 1 - when prompted hit any key and phone will reboot.
when up and running, run part 2.
Test nav by opening google maps and geting directions. Underneath "Show on Maps" you should see "Navigate" If you don't try installing Google Voice (fixed it for a lot of people)
If you did the above and Navigate isn't working, here is a link to the build.prop version that causes some app errors but gets nav Working
http://www.mediafire.com/?tyzmnzzkhen
Skreacher said:
FOR SAPPHIRE
I read a post earlier about fixing some apps not working.
in build.prop
change to 4 instead of 5.
ro.build.version.sdk=4
If you did the above and Navigate isn't working, here is a link to the build.prop version that causes some app errors but gets nav Working
http://www.mediafire.com/?tyzmnzzkhen
Click to expand...
Click to collapse
Did you mean to post in here??
lol
Was looking for the other thread actually=p... Where i posted the same instructions=p.
Thanks man
theomajigga said:
STEPS:
1. rootedbase.zip
2. reboot
3. wipe
4. cynwmap.zip
Click to expand...
Click to collapse
Thank for putting this all together - i'll try it later on today.
Quick question though, why would you wipe after you install the rooted base? Would that not defy the point of installing the rooted base in the first place? Shouldn't it be: 1. Wipe, 2. rootedbase.zip, 3. Reboot, 4. cynwmap.zip?
novat said:
Thank for putting this all together - i'll try it later on today.
Quick question though, why would you wipe after you install the rooted base? Would that not defy the point of installing the rooted base in the first place? Shouldn't it be: 1. Wipe, 2. rootedbase.zip, 3. Reboot, 4. cynwmap.zip?
Click to expand...
Click to collapse
Yeah that looks correct to me. My understanding was 1. Wipe 2. Flash base 3. Reboot in recovery again 4. Flash Cynwmap
Also: If we already are already running CM 4.2.3.1 can we just flash the cynwmap.zip over the top without worrying about flashing the base again?
if i wanted to just run part 1.bin how would i do this? i tried and i got some errors about the files not existing.
novat said:
Also: If we already are already running CM 4.2.3.1 can we just flash the cynwmap.zip over the top without worrying about flashing the base again?
Click to expand...
Click to collapse
That should work to push the correct buid props, the reason that the rooted base was put in there, was to add the maps to the original package...
I'm going to modify this later tonight to make it just a patch update deal...
Got a micro-bio test in the AM
and yes, i had the first two instructions fliped.. i'll edit to correct it.
What are the odds Cyanogen puts something like this in the next update?
I hope so
ps, first post, been rooted and running Cyanogenmod for a week or so now, really digging it.
SwashbucklerJak said:
What are the odds Cyanogen puts something like this in the next update?
I hope so
ps, first post, been rooted and running Cyanogenmod for a week or so now, really digging it.
Click to expand...
Click to collapse
unfortunately 0.... if you look back in the news he got a C&D from google...
I forgot about that.
Well is there a way to make a quick patch job of it for noobs like myself?
I tried this exactly was instructions said...but couldn't get navigation...
I went to "get directions" and typed in the addresses and whatnot, but didn't get any navigation? Maybe someone can enlighten me (isn't it supposed to be turn by turn voice?). Thanks
no offense to the Original Poster but...
can anyone else confirm that this actually works?
i really want Google Maps Nav on my phone!!!
Thanks again to the OP for this.
EDIT!
aha jabbawalkee just answered my post. lol
jabbawalkee said:
I tried this exactly was instructions said...but couldn't get navigation...
I went to "get directions" and typed in the addresses and whatnot, but didn't get any navigation? Maybe someone can enlighten me (isn't it supposed to be turn by turn voice?). Thanks
Click to expand...
Click to collapse
Let me check...
I used it on my mt3g with the danger/death spl. partitioned my sd 3 ways.
I'll try it right now again...
jabbawalkee said:
I tried this exactly was instructions said...but couldn't get navigation...
I went to "get directions" and typed in the addresses and whatnot, but didn't get any navigation? Maybe someone can enlighten me (isn't it supposed to be turn by turn voice?). Thanks
Click to expand...
Click to collapse
did you get a prompt to download the voices??
theomajigga said:
did you get a prompt to download the voices??
Click to expand...
Click to collapse
No...nothing of the sort. It just looked like the normal Google Maps app to me
My steps EXACTALLY
Ok here's what I did, and its only for the **mt3g** (possibly the sapphire)
1. used amon's recovery and partitioned my card 3 ways.
2. enabled USB mass storage from recovery
3. Wiped
4. choose update ---> rooted base.zip
5. reboot right into recovery
6. wipe again (probably repetitive)
7. choose update ---> cyan w map.zip
8. wipe again for good measure (again probably repetitive)
9. reboot
at this point i get the familiar cyan boot, it goes into the setup and says welcome to droid.
I skip all setup because I have to use wifi, probably not relevant but that is what I do.
Enable wifi.
click on maps (which you will see has a different logo now)
enter 2 USA addresses
click get directions
it finds directions and right under show on map, it says navigate.
clicked on navigate.
I then get prompted to download voices, click download
sign-in to google shiz
download voice pacakage
rerun maps and do a directions again
click navigate
EDIT:
There is a possibility that you will have to clear the data that is stored in the applications:
Settings
Applications
scroll to maps
Click on clear data
done.
jabbawalkee said:
No...nothing of the sort. It just looked like the normal Google Maps app to me
Click to expand...
Click to collapse
I'm trying it again as we speak...
If this works, there is a couple more changes I am going to make, but I first want to see if people can get this working.

[Theme] Blue Sense

By request I put together a blue theme for a friend so I figured i would share.
Every thing is stock sense except for a couple changes that were made to stock images.... all the green has been removed from framework-res.apk and com.htc.resources.apk and has been replaced with blue. I re-drew all the .9pngs and there should be no major bugs... if there is please let me know. Location icon was also removed.
This theme will work on any 2.1 based sense rom.
http://www.mediafire.com/?jdntmjgxmyd
jonnybueno said:
By request I put together a blue theme for a friend so I figured i would share.
Every thing is stock sense except for a couple changes that were made to stock images.... all the green has been removed from framework-res.apk and com.htc.resources.apk and has been replaced with blue. I re-drew all the .9pngs and there should be no major bugs... if there is please let me know. Location icon was also removed.
This theme will work on any 2.1 based sense rom.
http://www.mediafire.com/?jdntmjgxmyd
Click to expand...
Click to collapse
So how do I get that on my phone??? #noob
jGroves said:
So how do I get that on my phone??? #noob
Click to expand...
Click to collapse
Flash zip in recovery. Make a nandroid first.
can you do blue for the wifi and signal bars ?
Mthodmn101 said:
can you do blue for the wifi and signal bars ?
Click to expand...
Click to collapse
K i will try to get to that soon
edit: nevermind i took it from a different theme
jonnybueno said:
Flash zip in recovery. Make a nandroid first.
Click to expand...
Click to collapse
Sorry, I have no idea what that means.
Works Great
great theme, thanks
how do I get this **** on my phone?? someone answer like you'd would explain to someone who doesn't know anything about all your techy jargon - because I don't.
Sent from my ADR6300 using the XDA mobile application powered by Tapatalk
jGroves said:
how do I get this **** on my phone?? someone answer like you'd would explain to someone who doesn't know anything about all your techy jargon - because I don't.
Sent from my ADR6300 using the XDA mobile application powered by Tapatalk
Click to expand...
Click to collapse
Sorry I've been busy working on putting together themes for the community. You want to put the zip file on your sdcard then boot into recovery. You can boot into recovery by holding the - volume button and then power when your phone is off then choosing the appropriate options on the bootloader screen. Once you get into recovery, select the choose zip from sdcard option and find the theme.
You must be rooted in order to apply. If you don't know how to flash a zip from recovery then you may need to do more reading before modding your phone. If you need more assistance than this, please donate and I will walk through the process via gtalk or gmail. Please don't post rude comments because haven't replied for a day.
Thank you that is all.
jonnybueno said:
Sorry I've been busy working on putting together themes for the community. You want to put the zip file on your sdcard then boot into recovery. You can boot into recovery by holding the - volume button and then power when your phone is off then choosing the appropriate options on the bootloader screen. Once you get into recovery, select the choose zip from sdcard option and find the theme.
You must be rooted in order to apply. If you don't know how to flash a zip from recovery then you may need to do more reading before modding your phone. If you need more assistance than this, please donate and I will walk through the process via gtalk or gmail. Please don't post rude comments because haven't replied for a day.
Thank you that is all.
Click to expand...
Click to collapse
Yeah, my fault man. Thanks for your work. I'm not rooted & don't know how & don't know as much as I should about how to do all that stuff, so I don't guess I'll be using this theme. It's hard to learn just by reading when you don't know what a lot of stuff you're reading even means.
i just tried this. just noticed that you said you removed the location bullseye icon. you did, but it leaves a black space where it used to be. something else needs to be edited for the icon and the blank space to completely go away.
jasonb1985 said:
i just tried this. just noticed that you said you removed the location bullseye icon. you did, but it leaves a black space where it used to be. something else needs to be edited for the icon and the blank space to completely go away.
Click to expand...
Click to collapse
Unless you can get me source code for htc sense, i don't see this happening anytime soon. This is probably coded deep into the framework...
Running this until the red is ready. Can the progress bar be blue too?
Sent from my ADR6300 using Tapatalk
bblanski said:
Running this until the red is ready. Can the progress bar be blue too?
Sent from my ADR6300 using Tapatalk
Click to expand...
Click to collapse
The browser progress bar? Volume progress bar should already be blue
Yup, the browser progress bar.
Sent from my ADR6300 using Tapatalk
jonnybueno said:
Unless you can get me source code for htc sense, i don't see this happening anytime soon. This is probably coded deep into the framework...
Click to expand...
Click to collapse
ok, i was just curious. it's not a huge deal.
jonnybueno said:
Unless you can get me source code for htc sense, i don't see this happening anytime soon. This is probably coded deep into the framework...
Click to expand...
Click to collapse
I dont pretend to know a lot about theming for Android, cause I dont, but can you replace the missing icon with a transparent blank image causing the black box to disapear and show the bar below it?
I understand it wont remove it completely but it might help for the black box he is seeing.
fader01 said:
I dont pretend to know a lot about theming for Android, cause I dont, but can you replace the missing icon with a transparent blank image causing the black box to disapear and show the bar below it?
I understand it wont remove it completely but it might help for the black box he is seeing.
Click to expand...
Click to collapse
Have you loaded the theme up? His issue is the space the invisible icon takes up, there is no black box.

Epic Unleashed 1.1! Get your bug fixes here!

Epic Unleashed 1.1! First DROID2 rom!
For all the bugs people reported, I thank you. This release should fix a bunch of those bugs!
UPDATE:If you are having problems follow the new instructions on how to install bellow.
Changelog:
MAJOR Bug fixes.
Screen turns off.
Keyboard works.
Wifi may work(untested)
Accelerometer works.
Missing anything...?
Thanks:
Thank you Brendan for testing this release for me while my phone takes a little "nap" lol.
Features:
Deodexed
Bloatware removed
Scripts
Build.prop mods
Not sure if everyone know's this, but all my releases come with a widget that looks just like the HTC Clock called Fancy Widgets.
Please report bugs to me as you find them. Best way to contact me is email me at [email protected] or my GTalk Matt4542.
How to install:Important!
You will need to download Koush's bootstrap application and bootstrap your recovery. Then you can boot into recovery via the same app or you can install via ROM Manager(by rebooting into recovery, not via install rom from sdcard). Once you boot into recovery do a FULL nandroid backup and then you go to mounts and storage and mount /system manually to avoid more issues. Install zip from sdcard and toggle signature verification to disable. Now you can install the zip from the sdcard. Once this is done, reboot.
Now after reading all that here is your download!
Download <--- Click Me
For the best support please join my IRC chat on Freenode. #epicrom
Thanks for using Epic the first DROID 2 rom! Say thanks if you like it
I am trying to buy a domain name to host my files. All I need is $15 dollars. You do not have to do this if you do not want to. It is just to help me out a little bit Please donate as little as $1 to my PayPal [email protected]. Thanks if you do!
NOTE: Updated September 7th, 2010. Added additional steps to the process. Reread to reapply the Epic Unleashed 1.1!
Please READ each direction CAREFULLY and BEFORE executing each step. I can not stress how many mistakes are made because someone did not READ the directions carefully. So... yeah, once again, READ THE DIRECTIONS CAREFULLY!
How to Apply EpicUnleashed 1.1
Credits: The ROM was created by Matt4542. Tutorial was written by me with some simple directions from Matt. You'll need to be rooted in order to run the Droid 2 Bootstrapper.
The fine print: Matt4542 and/or I (DarkOnion) can not be held responsible if you mess up. If you mess up, you mess up. That's why I wrote the .sbf recovery tutorial. Matt has also written one. More simple, but requires Linux.
Here we go.
1. Download Koush Bootstrap here.
http://koush.tandtgaming.com//motorola/droid2/Droid2Bootstrap.apk
2. Download Epic Unleashed 1.1!
http://www.epic.grrmode.com/Epic-Unleashed11Deodexed.zip
3. Move both files to the base of the SD Card. Best way to do this is to plug your phone into your computer and move it like that. Make sure you phone is in USB mass storage mode. To change it, pull down the notification blind, choose USB connection, and choose USB Mass storage. Now copy and paste the two files to the new removable drive that showed up in your My Computer. The Epic-Unleashed11Deodexed.zip needs to be at the base of the SD card, and not in any folders. After moving all the files over to the phone, change the connection type back to Charge Only. Notfication blind -> USB Connection -> Charge only.
4. Install Koush Droid 2 Bootstrapper. Using an app installer, Astro File Manager, or equivalent, navigate to your SD card. The folder in Astro File Manager will be called sdcard. Choose Droid2Bootstrap.apk and install it. Follow the directions.
5. Now that it is installed, open Droid 2 Bootstrapper located in your applications section menu. It'll probably ask you for Super User access, say yes.
6. Press Bootstrap Recovery. It'll probably ask you for Super User access, say yes.
7. Next, we want to back your system file up by making a system image. In the Droid2 Bootstrapper, which you are already in, choose Reboot Recovery. Your phone should restart and load up into the bootloader.You should see some green text with various options, and a little lower than the middle of the screen, it says ClockworkMod Recovery.
Notes for navigating through the system. You need to use the keyboard to navigate. "Enter" will select. "Del" will cancel/go back. and the arrows are movement.
8. Using your slide out keyboard, scroll down to backup and restore and press the enter key. It should take you to another window. Choose Backup. Let it runs it's course. After it is all said and done. Reboot your phone by choosing reboot system now. (I don't think the rebooting is necessary, but I am just going to do it be safe.)
9. After you are done rebooting, if you did this, go back to the Droid 2 Bootstrapper, and choose Reboot Recovery. It'll reboot, and you'll eventually be back at the screen with the green text.
10. Using your keyboard buttons, choose mount and storage. And then choose mount /system. After that, press del to go back to the main menu.
11. Using your keyboard buttons, choose install zip from sdcard.
12. You need to make sure signature verification is off. Choose toggle signature verification and make sure it is off. At the bottom, under ClockworkMod Recovery, it'll say whether or not signature verification is enabled or disabled. You want it to say that it is disabled.
13. Then choose install zip from sdcard. Choose Epic-Unleashed11Deodexed.zip. It'll ask to confirm. Scroll down to Yes, and press enter. You'll see some commands going and eventually say it is complete.
14. Now navigate back to the main menu by pressing "Del" on the keyboard. And restart your phone by choosing reboot system now. It'll reboot and that's it! You've added EpicUnleashed 1.1.
Note: Your first boot will take a little while, up to 10 minutes. PLEASE BE PATIENT. You know that you corrected updated if your start-up animation is different.
If you need to undo this thing, boot back up into bootloader using Droid 2 Bootstrapper -> Reboot Recovery -> Back Up and Restore (after the reboot) -> Restore.
If you like this tutorial or any other tutorial, please feel free to show your gratitude by sending me a few bucks my way. I am a poor college student always trying to make ends meet. It's just more than writing a tutorial. Troubleshooting, helping others when they get lost, constant updating and rewording to make the process more simple. All donations are greatly appreciated, no matter the amount. $1 USD is good for two taco's at Jack in the Box! Paypal: [email protected]
And please don't forget about Matt. Send some love his way, too. It takes time create this stuff, not to mention troubleshoot, fix, and update. Make sure you send some love his direction. He needs money for a domain name. Paypal him at: [email protected]
If anyone comes across and problems with instructions, please let me know. I am going to try to keep this thread updated and easy to use.
= = =
How to Root Droid 2
http://forum.xda-developers.com/showpost.php?p=7865824&postcount=164
How to SBF Recovery Droid 2
http://forum.xda-developers.com/showthread.php?t=770224
How to Flash Epic Unleashed 1.1 ROM (see post #2)
http://forum.xda-developers.com/showthread.php?t=776320
I have v1.0 installed now. When I go into bootstrap and try to install 1.1 my phone still reads rom v1.0...?
Sent from my DROID2 using Tapatalk
Same for me, I came from stock and it appears I am still stock (no weather widget, etc). I notice I did not move the .zip from my /downloads/ to the base sd card, I will try that when I have some time.
Sent from my DROID2 using XDA App
pulptastic said:
Same for me, I came from stock and it appears I am still stock (no weather widget, etc). I notice I did not move the .zip from my /downloads/ to the base sd card, I will try that when I have some time.
Sent from my DROID2 using XDA App
Click to expand...
Click to collapse
I am working on the issue now.
heartlessmcfly said:
I have v1.0 installed now. When I go into bootstrap and try to install 1.1 my phone still reads rom v1.0...?
Sent from my DROID2 using Tapatalk
Click to expand...
Click to collapse
I am working on a fix for that.
Thank you for the quick response. I am very excited about roms on the d2! I will play around with it some more after dinner.
Sent from my DROID2 using XDA App
I came from stock and it appears I am still stock (no weather widget, etc). Nothing has changed.
Maybe you can put the launcher2.apk for 2.2 as the main homescreen. I downloaded it from the droid incredible forum on my phone and everything is working alot snappier on my end. Still using stock just looking and waiting until everything is figured on this rom.
Later....
Sent from my DROID2 using XDA App
pulptastic said:
Thank you for the quick response. I am very excited about roms on the d2! I will play around with it some more after dinner.
Sent from my DROID2 using XDA App
Click to expand...
Click to collapse
As a test for now just try to install your recovery from ROM Manager and boot into recovery that way. It is untested but it is worth a shot.
trillside said:
Maybe you can put the launcher2.apk for 2.2 as the main homescreen. I downloaded it from the droid incredible forum on my phone and everything is working alot snappier on my end. Still using stock just looking and waiting until everything is figured on this rom.
Later....
Sent from my DROID2 using XDA App
Click to expand...
Click to collapse
Actually all of the bugs have been ironed out. It is a problem with the recovery. It may affect you, may not. I would put the stock Froyo launcher but I am not going to risk screwing with blur and causing more problems now. I will do it in a later release.
ya i installed it, but i did it from my downloads folder, it took like 3 seconds and nothing is new lol, i will have to try from the root i guess.
th3drow said:
ya i installed it, but i did it from my downloads folder, it took like 3 seconds and nothing is new lol, i will have to try from the root i guess.
Click to expand...
Click to collapse
I tried this and still nothing is new...
I tried to install this rom using multiple ways:
Wiped phone
Normal install as instructions say
Wiping SDCARD
Could not see any changes.
I'm sort of a noob at this but is this going to improve the speed of the device
Antiapplekid said:
I'm sort of a noob at this but is this going to improve the speed of the device
Click to expand...
Click to collapse
Yes and no. It'll is suppose to help clean up some of the junk that is on the phone. Have you rooted yet, because if you haven't... you need to do that before you flash a fixed version.
Yep I have already rooted it but I am in the stage where it says to make sure that my signature check is disable mine is enable how do I get it disabled sorry for being such a noob lol i got 5th in the state of Minnesota for computer repair but I I haven't done this kinda of stuff before
Everyone who has had problems please read my updated instructions!
for those having problems installing epic 1.1 try going to mounts and storage in clockworkmod recovery and select -mount /system before installing update.zip. worked for me may work for u idk. it now shows epic under android version instead of 2.2...
JKASS5 said:
for those having problems installing epic 1.1 try going to mounts and storage in clockworkmod recovery and select -mount /system before installing update.zip. worked for me may work for u idk. it now shows epic under android version instead of 2.2...
Click to expand...
Click to collapse
Yup. It does work. Thank you to you sir, and thank you to Matt for walking me through the updating process. I have updated the tutorial to reflect the changes.

How To Turn S-Off, Install MoDaCo Clockworkmod Recovery, and Install a Rom For Dummie

OK, I've read a lot of comments about people having trouble installing MoDaCo clockworkmod, or even turning their devices S-off. But my guide is going to go step though step of how to turn your device into a lean, mean killing machine. It took me days to accomplish this when i first got my device, hopefully this will take you under 30 minutes! I'm a junior member, i know, so cut me some slack, PLEASE.
WARNING AND DISCLAIMER: I AM NOT RESPONIBLE FOR ANYTHING THAT HAPPENS TO YOUR PHONE. FLASH AT YOUR OWN RISK, EVEN IF IT FALLS APART IN YOUR HAND, OR BECOMES GODLY FAST!
1. The first thing we need to do is turn S-OFF for your mytouch 4g slide. It is probably the easiest thing to do, other then installing a rom on your device.
a. You will need to download the usb drivers for your phone, DON'T SKIP THIS STEP, or you'll wonder why your phone isn't discovered by the software. You can find those drivers at this website right here:
http://www.htc.com/managed-assets/support/software/htc-sync/setup_3.0.5579.exe
After you have that software installed, plug in your phone, and give it a couple minutes to install all the correct drivers for your device, then make sure you go to the bottom right of the computer and exit out of that software, it can't be running when your trying to S-OFF your device. Now I dont think you have to have the fastboot drivers installed either, but why not, lets go ahead and download those files and get those installed too.
http://downloads.unrevoked.com/HTCDriver3.0.0.007.exe
After you have those installed, its now time to move on.
b. Now thanks to unrevoked and AlphaRev and their team, you will go to their site at http://revolutionary.io/ and you will scroll down and click on Download for Windows (If you can take everything I'm saying and do the linux version, right on!) at that moment a download box will appear, but do not download those files, download the files from this website http://www.megaupload.com/?d=BP2E3ZQ3 .But you will need to enter some information in the box below after you click on windows download, just remember, you don't need those files. Your operating system, device, HBOOT version, and serial number. Your HBOOT version can be found by taking your device, going to apps, settings, power, and uncheck fast boot, then power it off, i always power it off and then pull the battery out, makes me feel safer...and soon as its off, holding the volume down button, camera button, and power button all at the same time. You'll then see a screen with the android bots on the bottom are rolling on skateboards. At the top should be your HBOOT version, and there is only one option on the site, so hopefully your in luck! For your serial number,take the battery out from this screen, don't push any buttons, and on the sticker under the battery, your serial number will be there starting with HT--- or power your device back on, then go to apps, settings, about phone, phone identity, and wala, your device serial number. After you enter all that information into the site, it will generate you a beta key, YOU NEED THAT IN ORDER TO S-OFF AND ROOT YOUR DEVICE!! So write it down somewhere, copy and paste in word, do what you do
c. Now we have everything downloaded, we have our beta key, its time to get to work!
d. The file you downloaded from megaupload, "MT4GS-ADB-WINDOWS" you need to extract that file into a folder on your desktop. Make sure you open the folder mt4gs-adb, and extract the files out of the folder, so you should have 12 items in your folder on the desktop, not just a folder in a folder! I created a folder called "root mt4gs". You want all the files in one location. After there all extracted, open your folder on the desktop. On your phone, go to apps, settings, applications, development, and click on usb debugging and make sure the check mark is blue on the right. Now plug your phone into the computer.
Now in your "root mt4gs" folder, double click on revolutionary. At that moment it should ask you for that beta key i told you to save. Go ahead and enter that now (its case sensitive). Let the software run for a couple minutes....
Now after it says S-Off, your halfway there!! Your HBOOT will now say 1.44.1107. That way you know its done! It will ask you to install clockwork recovery mod, say NOOOO, it has hella problems. It gave me problems when i said yes the first time, i'll show you another way.
e. At this moment, we're going to install clockwork recovery v4.0.0.9, thanks to Paul O'Brien/MoDaCo, the gods lol. First, turn your device off/pull the battery out, thats what i do. Then hold volume down button, camera button, and power button at the same time. It should show you the skateboarding androids, and at the top it should say -Revolutionary- in purple. If it doesn't, don't continue, retry all steps or message me. Then plug your phone into the computer, and using the power button as the selection button, push the power button as your highlighted over FASTBOOT. It should say FASTBOOT USB at the top in red now.
Now believe it or not you already have the file you need in your "root mt4gs" folder. Your now going highlight all the files in your "root mt4gs" folder to the root of your hard drive. Click on My computer, double click on your c: drive, and paste those files right on there, do not copy the folder, or put these files in a folder!! Now your going open a command prompt. {Hold the windows key and tap r}. Then type "cmd" without the parenthesis and it should open up a black box.
Now type cd\
Your command prompt should now just say c:\> thats what you want it to say
Now your going to type adb.exe
You should see a whole bunch of words flash on the command prompt, the last couple words should say "bug tags are printed." That means your right on track.
From here, you are going to type in fastboot devices
it should have the serial number of your device and the word fastboot right next to it!
Now, here comes the tricky part that i got stuck at, but i know you can do it! Now this will work if you put the files exactly where i told you to put them. you now will type fastboot flash recovery c:\clockworkmod.4.0.0.9.img
it should say " sending 'recovery'
okay
writing recovery'
okay
finished. total time: (mine is 10.400s)
Now to make sure it's intalled, on your phone, click power button and you should now see fastboot, recovery, factory reset, simlock, and imagecrc as options, use your volume button to go down to recovery, and click power button.
You should now see clockworkmod recovery 4.0.0.9.
f. Now lets put superuser on your device so you can be free!
click on this file and download it, DO NOT EXTRACT IT
http://downloads.androidsu.com/superuser/su-2.3.6.3-efgh-signed.zip
Now after you have downoaded that file, on your phone, use your trackpad, and scroll down to "mounts and storage"
then scroll down to mount usb storage. now you should be able to put files on your sd card, make sure you put it on the root of your sd card, not in a folder, it doesn't matter, but i prefer it!.
Now unmount on your phone by clicking the option, click go back, and then scroll down to "install zip from sdcard" and click on it, then click "choose zip from sdcard". Find that file we just put on there "su-2.3.6.3-efgh-signed.zip", and click on it, then click yes. Now click on go back, and click reboot system now!
Now if you want to stay stock, your done, your rooted, so now just install root checker, and busybox, and your good to go, if you want to do some roms, keep on reading.
Now you cross your fingers, and grab a soda, because we're 75% done!
g. Now is the easy part, all you do now is download the roms from other developers, copy them to your sdcard, then turn off the phone, hold volume down, camera and power button, go into recovery with using vol up and down buttons as the selector, and the power button to confirm your option. As you enter clockwork mod, you can then go follow the directions of the developer as to wipe certain sections, and how to install there roms/patches. YOUR DONE
If you have any questions, please let me know, also I didn't make ANY of this software, this guide just has every link to get you everything you need at one spot. I also have the original file to make your phone completely stock, so if you need that, let me know and I'll upload that and send the link out.
If you want to donate to me, donate to all the other og's first!
Thanks to
jdmarko
unrevoked
alpharev
paulobrien
MoDaCo
and if I forgot you, let me know. thanks!
Now this is how you give a tutorial!!! If i had some extra cash i would totally donate bro! I was trying to install 4.0.0.9 for two days from the dude that made its site and his directions were not thorough enough. Thanks dude.
Oh dude no worries, a thanks is just as good. I appreciate it, it took me days, so I'm happy I could help brotha!
Sent from my MyTouch 4G Slide using xda premium
Going to try! :-D fingercross tor me!
Thank you very much, very good write up.
Geko90 said:
Going to try! :-D fingercross tor me!
Click to expand...
Click to collapse
Fingers are crossed, the tutorial has proven effective so far, so hope all goes well, tell me how it goes!
poken1151 said:
Thank you very much, very good write up.
Click to expand...
Click to collapse
Thanks! I'm assuming it worked then?!
Superuser wont install for me, Error in /sdcard/su-2.3.6.3-efgh-signed.zip
Status 0
I wiped cashe/ dalvic downloaded several times No good.
correct hboot, s=off
just wont flash SU ???
phil0sophic said:
Superuser wont install for me, Error in /sdcard/su-2.3.6.3-efgh-signed.zip
Status 0
I wiped cashe/ dalvic downloaded several times No good.
correct hboot, s=off
just wont flash SU ???
Click to expand...
Click to collapse
Ok let's figure this out.. on step f, you did unmount your sd card, right? I haven't dealt with this problem before so if I ask a stupid question, I'm just trying to solve this. Also you don't need to wipe anything to install superuser, so that could be the problem also, so reboot ur fone, and let's try step f again! Keep me updated please!
phil0sophic said:
Superuser wont install for me, Error in /sdcard/su-2.3.6.3-efgh-signed.zip
Status 0
I wiped cashe/ dalvic downloaded several times No good.
correct hboot, s=off
just wont flash SU ???
Click to expand...
Click to collapse
It took a lot of us several attempts to flash the superuser zip. The 4.0.0.8 recovery isn't the greatest. Keep trying until it installs and you get root. Then upgrade to the modaco 4.0.0.9 recovery right away. It's not perfect either but it fixes a LOT of the issues known with 4.0.0.8.
And a comment to the OP, this is an incredibly helpful walkthrough! If only people would actually search and find this before posting new threads like "how do i root" and all that crap.
Thank you.
Great job on this and thanks for your work. I wish I would have had this tutorial when I did mine.
Sent via my talk enabled Galaxy Tab using XDA premium.
Techlvr said:
Great job on this and thanks for your work. I wish I would have had this tutorial when I did mine.
Sent via my talk enabled Galaxy Tab using XDA premium.
Click to expand...
Click to collapse
Thanks, I had a lot of trouble doing mine the first time, and I went back to stock, typed this and gave my wife my phone and she went step by step and completed it. So it can't be that hard!
Does this add an app to reboot from as the standard cwm does?
phil0sophic said:
Does this add an app to reboot from as the standard cwm does?
Click to expand...
Click to collapse
An app to reboot from? Not understanding the question throughly... In this cwm, it has the option to reboot system as every other cwm that I've used has. But an app... I do not have an app though...hope I answered your question!
numbaoneforeva said:
An app to reboot from? Not understanding the question throughly... In this cwm, it has the option to reboot system as every other cwm that I've used has. But an app... I do not have an app though...hope I answered your question!
Click to expand...
Click to collapse
OK ill reexplain is there an icon in the apps drawer for CWM to select to reboot etc. because it didnt install one on the MT4Gslide as on my MT4G.
I know something is goofy as SU wouldnt flash, I had to install the new version from the market.
phil0sophic said:
OK ill reexplain is there an icon in the apps drawer for CWM to select to reboot etc. because it didnt install one on the MT4Gslide as on my MT4G.
I know something is goofy as SU wouldnt flash, I had to install the new version from the market.
Click to expand...
Click to collapse
Oh, now i understand. No there isn't. I don't have one at all, as soon as I installed clockworkrecovery, and superuser, I flashed undeads rom on there. And I've been reading that superuser is being buggy when installing it on this phone through cwm...I'll look into that tonight, see if i can find the root cause.
Thanks...This is my wifes phone, she just upgraded from a CLIQ (one of the two people that loved blur)she likes my MT4G and wanted a KBD so here we are....
I want to change the lock ring so need root for the wonderful majic you dev's do....
phil0sophic said:
Thanks...This is my wifes phone, she just upgraded from a CLIQ (one of the two people that loved blur)she likes my MT4G and wanted a KBD so here we are....
I want to change the lock ring so need root for the wonderful majic you dev's do....
Click to expand...
Click to collapse
Well your at the right forum to get you started. And thanks! This is my first post so I'm trying!
Sent from my MyTouch 4G Slide using xda premium
phil0sophic said:
OK ill reexplain is there an icon in the apps drawer for CWM to select to reboot etc. because it didnt install one on the MT4Gslide as on my MT4G.
I know something is goofy as SU wouldnt flash, I had to install the new version from the market.
Click to expand...
Click to collapse
You probably just have to download ROM Manager from the market, I think that's what you're referring to. There isn't a whole lot of support for our device in ROM manager right now, however, and I haven't checked to see if the "reboot into recovery" works. Go into settings > power > and uncheck fastboot. Then, shut down your phone, wait 10 seconds, hold down the volume down button and turn your phone back on. That'll get you into recovery. Did you get superuser to install? Are you rooted?
Mine won't switch from "revolutionary" in purple at the top to "fastboot" at the top.
It says fastboot USB about 6 lines down, but that's it.
When I type "fastboot devices" it errors and says:
'fastboot' is not recognized as an internal or external command, operable program or batch file.
anyone know what's up?

[Q] Bad rooting of android phone?

Hi
I rooted my phone today. Samsung Galaxy Mini S5570.
It went quite well. I deleted all the bloatware that I didn't want etc.
After all that was gone I starting disabling things that I thought was extra. At one point the phone switched off and didn't come on again. I rebooted it and when it did come back on the only things I can access now are the notification panel at the top of my page, my volume control and the power key. The screen has gone black. I cant use anything else now. Its obvious I've disabled the home screen or something.
What can I do, if anything?
Really appreciate any help. Thank you.
speedy2014 said:
Hi
I rooted my phone today. Samsung Galaxy Mini S5570.
It went quite well. I deleted all the bloatware that I didn't want etc.
After all that was gone I starting disabling things that I thought was extra. At one point the phone switched off and didn't come on again. I rebooted it and when it did come back on the only things I can access now are the notification panel at the top of my page, my volume control and the power key. The screen has gone black. I cant use anything else now. Its obvious I've disabled the home screen or something.
What can I do, if anything?
Really appreciate any help. Thank you.
Click to expand...
Click to collapse
You have removed the "homescreen" (Launcher)
Do you have usb debugging enabled?
If so then you can move a launcher apk to /data/app
(if you need a launcher apk and instructions to do this then ask me )
if not then go find a cwm launcher installer (if you have recovery installed)
and flash that.
It will give you a launcher to work with.
If you need help with modding or removing apps, etc.
Then you can pm me so we don't spam this thread.
Use Samsung PC suite it will fix all the errors in your phone then root it again.
Sent from my Xperia Neo L using xda app-developers app
speedy2014 said:
Attention quote
Click to expand...
Click to collapse
An apk is an application package for android.
The homescreen is the app that is run when you unlock the screen. (It is also known as the launcher)
You will need the drivers for your phone.
Which you can obtain from your manufacturers website. (Example: Samsung mesmerize > Support > downloads > driver.msi)
I have attached a zip file that needs to be extracted. (I put it together just for you )
Once extracted you must go inside the extracted folder and double click the start file.
Follow the instructions from there.
You will not need to connect wirelessly so just press enter.
It does almost all the work for you.
It's not a flash zip.
Its a script.
Go herehttp://www.samsung.com/uk/support/model/GT-S5570EGAMET-downloads
Then install the kies from software tab
run that and plug your phone in with usb.
Then let it detect it and install whatever is necessary.
Make sure it has a connection then try my tool.
My tool is a Windows script.
For Windows.
Not Android.
Extract my zip and run the start file.
If it detects your device then let it fix your stuff.
It cant get any clearer than that. Really appreciate this. I just need to get onto the computer now. Will do it in the next 24 hours and let you know how I get on.
speedy2014 said:
It cant get any clearer than that. Really appreciate this. I just need to get onto the computer now. Will do it in the next 24 hours and let you know how I get on.
Click to expand...
Click to collapse
I have a zip here as an attachment. (The Cwm veersion of my homescreen Repair)
Don't use it without a backup in recovery.
You might have to disable signature checking.
Make sure you put the zip on the sd card of the phone.
Goto mounts and storage in recovery and make sure that /data is MOUNTED!
I repeat, Mount /data FIRST.
Then go flash the zip from the sdcard or adb sideload(>Haven't tested sideloading)
Reboot. Enjoy.
Update!
It doesn't work for some reason.
Can I get a dev to help me?
Bump.
:silly::crying:

Categories

Resources